depends on MODPROBE_SMALL
help
Allow insmod and modprobe take module options from command line.
- N.B. Very bloaty.
config FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
bool "Skip loading of already loaded modules"
depends on MODPROBE_SMALL
help
Check if the module is already loaded.
- N.B. It's racy.
-config DEPMOD
- bool "depmod"
+config INSMOD
+ bool "insmod"
default n
depends on !MODPROBE_SMALL
help
- depmod generates modules.dep (FIXME: elaborate)
+ insmod is used to load specified modules in the running kernel.
-config FEATURE_DEPMOD_PRUNE_FANCY
- bool "Fancy dependency pruning"
+config RMMOD
+ bool "rmmod"
default n
- depends on DEPMOD
+ depends on !MODPROBE_SMALL
help
- By default modules.dep contains all dependencies as listed by
- the modules.
- If you enable this option then we remove implied modules from
- the dependencies.
- This makes depmod somewhat bigger but generates a smaller
- modules.dep file.
+ rmmod is used to unload specified modules from the kernel.
- If unsure, say N.
+config LSMOD
+ bool "lsmod"
+ default n
+ depends on !MODPROBE_SMALL
+ help
+ lsmod is used to display a list of loaded modules.
-config FEATURE_DEPMOD_ALIAS
- bool "Alias support"
+config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
+ bool "Pretty output"
default n
- depends on DEPMOD
+ depends on LSMOD
help
- By default modules.dep does not contain alias information.
- Enable this to emit aliases of the form:
+ This option makes output format of lsmod adjusted to
+ the format of module-init-tools for Linux kernel 2.6.
+ Increases size somewhat.
- alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
+config MODPROBE
+ bool "modprobe"
+ default n
+ depends on !MODPROBE_SMALL
+ help
+ Handle the loading of modules, and their dependencies on a high
+ level.
-config INSMOD
- bool "insmod"
+config FEATURE_MODPROBE_BLACKLIST
+ bool "Blacklist support"
+ default n
+ depends on MODPROBE
+ help
+ Say 'y' here to enable support for the 'blacklist' command in
+ modprobe.conf. This prevents the alias resolver to resolve
+ blacklisted modules. This is useful if you want to prevent your
+ hardware autodetection scripts to load modules like evdev, frame
+ buffer drivers etc.
+
+config DEPMOD
+ bool "depmod"
default n
depends on !MODPROBE_SMALL
help
- insmod is used to load specified modules in the running kernel.
+ depmod generates modules.dep (and potentially modules.alias
+ and modules.symbols) that contain dependency information
+ for modprobe.
+
+comment "Options common to multiple modutils"
+
+config FEATURE_2_4_MODULES
+ bool "Support version 2.2/2.4 Linux kernels"
+ default n
+ depends on INSMOD || RMMOD || LSMOD
+ help
+ Support module loading for 2.2.x and 2.4.x Linux kernels.
+ This increases size considerably. Say N unless you plan
+ to run ancient kernels.
+
+config FEATURE_INSMOD_TRY_MMAP
+ bool "Try to load module from a mmap'ed area"
+ default n
+ depends on INSMOD || MODPROBE_SMALL
+ help
+ This option causes module loading code to try to mmap
+ module first. If it does not work (for example,
+ it does not work for compressed modules), module will be read
+ (and unpacked if needed) into a memory block allocated by malloc.
+
+ The only case when mmap works but malloc does not is when
+ you are trying to load a big module on a very memory-constrained
+ machine. Malloc will momentarily need 2x as much memory as mmap.
+
+ Choosing N saves about 250 bytes of code (on 32-bit x86).
config FEATURE_INSMOD_VERSION_CHECKING
- bool "Module version checking"
+ bool "Enable module version checking"
default n
- depends on INSMOD && FEATURE_2_4_MODULES
+ depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
Support checking of versions for modules. This is used to
ensure that the kernel and module are made for each other.
config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
bool "Add module symbols to kernel symbol table"
default n
- depends on INSMOD && FEATURE_2_4_MODULES
+ depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
By adding module symbols to the kernel symbol table, Oops messages
occuring within kernel modules can be properly debugged. By enabling
this feature, module symbols will always be added to the kernel symbol
- table for properly debugging support. If you are not interested in
+ table for proper debugging support. If you are not interested in
Oops messages from kernel modules, say N.
config FEATURE_INSMOD_LOADINKMEM
bool "In kernel memory optimization (uClinux only)"
default n
- depends on INSMOD && FEATURE_2_4_MODULES
+ depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
help
This is a special uClinux only memory optimization that lets insmod
load the specified kernel module directly into kernel space, reducing
being loaded into memory.
config FEATURE_INSMOD_LOAD_MAP
- bool "Enable load map (-m) option"
+ bool "Enable insmod load map (-m) option"
default n
- depends on INSMOD && ( FEATURE_2_4_MODULES || FEATURE_2_6_MODULES )
+ depends on FEATURE_2_4_MODULES && INSMOD
help
Enabling this, one would be able to get a load map
output on stdout. This makes kernel module debugging
config FEATURE_INSMOD_LOAD_MAP_FULL
bool "Symbols in load map"
default y
- depends on FEATURE_INSMOD_LOAD_MAP
+ depends on FEATURE_INSMOD_LOAD_MAP && !MODPROBE_SMALL
help
Without this option, -m will only output section
load map. With this option, -m will also output
symbols load map.
-config RMMOD
- bool "rmmod"
- default n
- depends on !MODPROBE_SMALL
- help
- rmmod is used to unload specified modules from the kernel.
-
-config LSMOD
- bool "lsmod"
- default n
- depends on !MODPROBE_SMALL
- help
- lsmod is used to display a list of loaded modules.
-
-config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
- bool "Pretty output for 2.6.x Linux kernels"
- default n
- depends on LSMOD
- help
- This option makes output format of lsmod adjusted to
- the format of module-init-tools for Linux kernel 2.6.
-
-config MODPROBE
- bool "modprobe"
- default n
- depends on !MODPROBE_SMALL
- help
- Handle the loading of modules, and their dependencies on a high
- level.
-
- Note that in the state, modprobe does not understand multiple
- module options from the configuration file. See option below.
-
-config FEATURE_MODPROBE_MULTIPLE_OPTIONS
- bool
- prompt "Multiple options parsing"
- default y
- depends on MODPROBE
- help
- Allow modprobe to understand more than one option to pass to
- modules.
-
- This is a WIP, while waiting for a common argument parsing
- common amongst all BB applets (shell, modprobe, etc...) and
- adds around 600 bytes on x86, 700 bytes on ARM. The code is
- biggish and uggly, but just works.
-
- Saying Y here is not a bad idea if you're not that short
- on storage capacity.
-
-config FEATURE_MODPROBE_FANCY_ALIAS
- bool
- prompt "Fancy alias parsing"
- default y
- depends on MODPROBE && FEATURE_2_6_MODULES
- help
- Say 'y' here to enable parsing of aliases with underscore/dash
- mismatch between module name and file name, along with bus-specific
- aliases (such as pci:... or usb:... aliases).
-
-config FEATURE_MODPROBE_BLACKLIST
- bool
- prompt "Blacklist support"
- default n
- depends on MODPROBE && FEATURE_2_6_MODULES
- help
- Say 'y' here to enable support for the 'blacklist' command in
- modprobe.conf. This prevents the alias resolver to resolve
- blacklisted modules. This is useful if you want to prevent your
- hardware autodetection scripts to load modules like evdev, frame
- buffer drivers etc.
-
-comment "Options common to multiple modutils"
- depends on INSMOD || RMMOD || MODPROBE || LSMOD || DEPMOD
-
config FEATURE_CHECK_TAINTED_MODULE
- # Simulate indentation
bool "Support tainted module checking with new kernels"
default y
- depends on INSMOD || LSMOD
+ depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL
help
Support checking for tainted modules. These are usually binary
only modules that will make the linux-kernel list ignore your
support request.
This option is required to support GPLONLY modules.
-config FEATURE_2_4_MODULES
- # Simulate indentation
- bool "Support version 2.2.x to 2.4.x Linux kernels"
+config FEATURE_MODUTILS_ALIAS
+ bool "Support for module.aliases file"
default y
- depends on INSMOD || RMMOD || MODPROBE
+ depends on DEPMOD || MODPROBE
help
- Support module loading for 2.2.x and 2.4.x Linux kernels.
+ Generate and parse modules.alias containing aliases for bus
+ identifiers:
+ alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
+
+ and aliases for logical modules names e.g.:
+ alias padlock_aes aes
+ alias aes_i586 aes
+ alias aes_generic aes
- Note:
- This is automatically enabled if 2.6 modules are not enabled.
+ Say Y if unsure.
-config FEATURE_2_6_MODULES
- # Simulate indentation
- bool "Support version 2.6.x Linux kernels"
+config FEATURE_MODUTILS_SYMBOLS
+ bool "Support for module.symbols file"
default y
- depends on INSMOD || RMMOD || MODPROBE
+ depends on DEPMOD || MODPROBE
help
- Support module loading for newer 2.6.x Linux kernels.
+ Generate and parse modules.symbols containing aliases for
+ symbol_request() kernel calls, such as:
+ alias symbol:usb_sg_init usbcore
+
+ Say Y if unsure.
config DEFAULT_MODULES_DIR
- # Simulate indentation
string "Default directory containing modules"
default "/lib/modules"
- depends on INSMOD || RMMOD || MODPROBE || MODPROBE_SMALL || DEPMOD
+ depends on DEPMOD || MODPROBE || MODPROBE_SMALL
help
Directory that contains kernel modules.
Defaults to "/lib/modules"
config DEFAULT_DEPMOD_FILE
- # Simulate indentation
string "Default name of modules.dep"
default "modules.dep"
- depends on INSMOD || RMMOD || MODPROBE || MODPROBE_SMALL || DEPMOD
+ depends on DEPMOD || MODPROBE || MODPROBE_SMALL
help
Filename that contains kernel modules dependencies.
Defaults to "modules.dep"
-config FEATURE_QUERY_MODULE_INTERFACE
- bool
- default y
- depends on FEATURE_2_4_MODULES && !FEATURE_2_6_MODULES
-
endmenu