*/
-static int run_pipe(const char *unpacker, const char *pager, char *man_filename)
+#if ENABLE_FEATURE_SEAMLESS_LZMA
+#define Z_SUFFIX ".lzma"
+#elif ENABLE_FEATURE_SEAMLESS_BZ2
+#define Z_SUFFIX ".bz2"
+#elif ENABLE_FEATURE_SEAMLESS_GZ
+#define Z_SUFFIX ".gz"
+#else
+#define Z_SUFFIX ""
+#endif
+
+static int show_manpage(const char *pager, char *man_filename, int man, int level);
+
+static int run_pipe(const char *pager, char *man_filename, int man, int level)
{
char *cmd;
+ /* Prevent man page link loops */
+ if (level > 10)
+ return 0;
+
if (access(man_filename, R_OK) != 0)
return 0;
return 1;
}
- /* "2>&1" added so that nroff errors are shown in pager too.
+ if (man) { /* man page, not cat page */
+ /* Is this a link to another manpage? */
+ /* The link has the following on the first line: */
+ /* ".so another_man_page" */
+
+ struct stat sb;
+ char *line;
+ char *linkname, *p;
+
+ /* On my system:
+ * man1/genhostid.1.gz: 203 bytes - smallest real manpage
+ * man2/path_resolution.2.gz: 114 bytes - largest link
+ */
+ xstat(man_filename, &sb);
+ if (sb.st_size > 300) /* err on the safe side */
+ goto ordinary_manpage;
+
+ line = xmalloc_open_zipped_read_close(man_filename, NULL);
+ if (!line || strncmp(line, ".so ", 4) != 0) {
+ free(line);
+ goto ordinary_manpage;
+ }
+ /* Example: man2/path_resolution.2.gz contains
+ * ".so man7/path_resolution.7\n<junk>"
+ */
+ *strchrnul(line, '\n') = '\0';
+ linkname = skip_whitespace(&line[4]);
+
+ /* If link has no slashes, we just replace man page name.
+ * If link has slashes (however many), we go back *once*.
+ * ".so zzz/ggg/page.3" does NOT go back two levels. */
+ p = strrchr(man_filename, '/');
+ if (!p)
+ goto ordinary_manpage;
+ *p = '\0';
+ if (strchr(linkname, '/')) {
+ p = strrchr(man_filename, '/');
+ if (!p)
+ goto ordinary_manpage;
+ *p = '\0';
+ }
+
+ /* Links do not have .gz extensions, even if manpage
+ * is compressed */
+ man_filename = xasprintf("%s/%s" Z_SUFFIX, man_filename, linkname);
+ free(line);
+ /* Note: we leak "new" man_filename string as well... */
+ if (show_manpage(pager, man_filename, man, level + 1))
+ return 1;
+ /* else: show the link, it's better than nothing */
+ }
+
+ ordinary_manpage:
+ close(STDIN_FILENO);
+ open_zipped(man_filename); /* guaranteed to use fd 0 (STDIN_FILENO) */
+ /* "2>&1" is added so that nroff errors are shown in pager too.
* Otherwise it may show just empty screen */
- cmd = xasprintf("%s '%s' | gtbl | nroff -Tlatin1 -mandoc 2>&1 | %s",
- unpacker, man_filename, pager);
+ cmd = xasprintf(
+ man ? "gtbl | nroff -Tlatin1 -mandoc 2>&1 | %s"
+ : "%s",
+ pager);
system(cmd);
free(cmd);
return 1;
}
-/* man_filename is of the form "/dir/dir/dir/name.s.bz2" */
-static int show_manpage(const char *pager, char *man_filename)
+/* man_filename is of the form "/dir/dir/dir/name.s" Z_SUFFIX */
+static int show_manpage(const char *pager, char *man_filename, int man, int level)
{
- int len;
-
- if (run_pipe("bunzip2 -c", pager, man_filename))
+#if ENABLE_FEATURE_SEAMLESS_LZMA
+ if (run_pipe(pager, man_filename, man, level))
return 1;
+#endif
- len = strlen(man_filename) - 1;
+#if ENABLE_FEATURE_SEAMLESS_BZ2
+#if ENABLE_FEATURE_SEAMLESS_LZMA
+ strcpy(strrchr(man_filename, '.') + 1, "bz2");
+#endif
+ if (run_pipe(pager, man_filename, man, level))
+ return 1;
+#endif
- man_filename[len] = '\0'; /* ".bz2" -> ".gz" */
- man_filename[len - 2] = 'g';
- if (run_pipe("gunzip -c", pager, man_filename))
+#if ENABLE_FEATURE_SEAMLESS_GZ
+#if ENABLE_FEATURE_SEAMLESS_LZMA || ENABLE_FEATURE_SEAMLESS_BZ2
+ strcpy(strrchr(man_filename, '.') + 1, "gz");
+#endif
+ if (run_pipe(pager, man_filename, man, level))
return 1;
+#endif
- man_filename[len - 3] = '\0'; /* ".gz" -> "" */
- if (run_pipe("cat", pager, man_filename))
+#if ENABLE_FEATURE_SEAMLESS_LZMA || ENABLE_FEATURE_SEAMLESS_BZ2 || ENABLE_FEATURE_SEAMLESS_GZ
+ *strrchr(man_filename, '.') = '\0';
+#endif
+ if (run_pipe(pager, man_filename, man, level))
return 1;
return 0;
}
int man_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int man_main(int argc ATTRIBUTE_UNUSED, char **argv)
+int man_main(int argc UNUSED_PARAM, char **argv)
{
- FILE *cf;
+ parser_t *parser;
const char *pager;
char **man_path_list;
char *sec_list;
char *cur_path, *cur_sect;
- char *line, *value;
- int count_mp, alloc_mp, cur_mp;
+ int count_mp, cur_mp;
int opt, not_found;
+ char *token[2];
opt_complementary = "-1"; /* at least one argument */
opt = getopt32(argv, "+aw");
argv += optind;
sec_list = xstrdup("1:2:3:4:5:6:7:8:9");
- alloc_mp = 10;
- man_path_list = xmalloc(10 * sizeof(man_path_list[0]));
+ /* Last valid man_path_list[] is [0x10] */
count_mp = 0;
- man_path_list[0] = xstrdup(getenv("MANPATH"));
- if (man_path_list[0])
+ man_path_list = xzalloc(0x11 * sizeof(man_path_list[0]));
+ man_path_list[0] = getenv("MANPATH");
+ if (!man_path_list[0]) /* default, may be overridden by /etc/man.conf */
+ man_path_list[0] = (char*)"/usr/man";
+ else
count_mp++;
pager = getenv("MANPAGER");
if (!pager) {
pager = "more";
}
- /* Parse man.conf */
- cf = fopen_or_warn("/etc/man.conf", "r");
- if (cf) {
- /* go through man configuration file and search relevant paths, sections */
- while ((line = xmalloc_fgetline(cf)) != NULL) {
- trim(line); /* remove whitespace at the beginning/end */
- if (isspace(line[7])) {
- line[7] = '\0';
- value = skip_whitespace(&line[8]);
- *skip_non_whitespace(value) = '\0';
- if (strcmp("MANPATH", line) == 0) {
- man_path_list[count_mp] = xstrdup(value);
- count_mp++;
- if (alloc_mp == count_mp) {
- alloc_mp += 10;
- man_path_list = xrealloc(man_path_list, alloc_mp * sizeof(man_path_list[0]));
- }
- /* thus man_path_list is always NULL terminated */
+ /* Parse man.conf[ig] */
+ /* man version 1.6f uses man.config */
+ parser = config_open2("/etc/man.config", fopen_for_read);
+ if (!parser)
+ parser = config_open2("/etc/man.conf", fopen_for_read);
+
+ while (config_read(parser, token, 2, 0, "# \t", PARSE_NORMAL)) {
+ if (!token[1])
+ continue;
+ if (strcmp("MANPATH", token[0]) == 0) {
+ char *path = token[1];
+ while (*path) {
+ char *next_path;
+ char **path_element;
+
+ next_path = strchr(path, ':');
+ if (next_path) {
+ *next_path = '\0';
+ if (next_path++ == path) /* "::"? */
+ goto next;
}
- if (strcmp("MANSECT", line) == 0) {
- free(sec_list);
- sec_list = xstrdup(value);
+ /* Do we already have path? */
+ path_element = man_path_list;
+ while (*path_element) {
+ if (strcmp(*path_element, path) == 0)
+ goto skip;
+ path_element++;
}
+ man_path_list = xrealloc_vector(man_path_list, 4, count_mp);
+ man_path_list[count_mp] = xstrdup(path);
+ count_mp++;
+ /* man_path_list is NULL terminated */
+ /*man_path_list[count_mp] = NULL; - xrealloc_vector did it */
+ skip:
+ if (!next_path)
+ break;
+ next:
+ path = next_path;
}
- free(line);
}
- fclose(cf);
+ if (strcmp("MANSECT", token[0]) == 0) {
+ free(sec_list);
+ sec_list = xstrdup(token[1]);
+ }
}
-
-// TODO: my man3/getpwuid.3.gz contains just one line:
-// .so man3/getpwnam.3
-// (and I _dont_ have man3/getpwnam.3, I have man3/getpwnam.3.gz)
-// need to support this...
+ config_close(parser);
not_found = 0;
do { /* for each argv[] */
int found = 0;
cur_mp = 0;
+
+ if (strchr(*argv, '/')) {
+ found = show_manpage(pager, *argv, /*man:*/ 1, 0);
+ goto check_found;
+ }
while ((cur_path = man_path_list[cur_mp++]) != NULL) {
/* for each MANPATH */
- do { /* for each MANPATH item */
- char *next_path = strchrnul(cur_path, ':');
- int path_len = next_path - cur_path;
- cur_sect = sec_list;
- do { /* for each section */
- char *next_sect = strchrnul(cur_sect, ':');
- int sect_len = next_sect - cur_sect;
-
- char *man_filename = xasprintf("%.*s/man%.*s/%s.%.*s" ".bz2",
- path_len, cur_path,
- sect_len, cur_sect,
- *argv,
- sect_len, cur_sect);
- found |= show_manpage(pager, man_filename);
+ cur_sect = sec_list;
+ do { /* for each section */
+ char *next_sect = strchrnul(cur_sect, ':');
+ int sect_len = next_sect - cur_sect;
+ char *man_filename;
+ int cat0man1 = 0;
+
+ /* Search for cat, then man page */
+ while (cat0man1 < 2) {
+ int found_here;
+ man_filename = xasprintf("%s/%s%.*s/%s.%.*s" Z_SUFFIX,
+ cur_path,
+ "cat\0man" + (cat0man1 * 4),
+ sect_len, cur_sect,
+ *argv,
+ sect_len, cur_sect);
+ found_here = show_manpage(pager, man_filename, cat0man1, 0);
+ found |= found_here;
+ cat0man1 += found_here + 1;
free(man_filename);
- if (found && !(opt & OPT_a))
- goto next_arg;
- cur_sect = next_sect;
- while (*cur_sect == ':')
- cur_sect++;
- } while (*cur_sect);
- cur_path = next_path;
- while (*cur_path == ':')
- cur_path++;
- } while (*cur_path);
+ }
+
+ if (found && !(opt & OPT_a))
+ goto next_arg;
+ cur_sect = next_sect;
+ while (*cur_sect == ':')
+ cur_sect++;
+ } while (*cur_sect);
}
+ check_found:
if (!found) {
bb_error_msg("no manual entry for '%s'", *argv);
not_found = 1;