*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
-
//config:config I2CGET
//config: bool "i2cget (5.6 kb)"
//config: default y
*/
#include "libbb.h"
-#include "common_bufsiz.h"
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2CDUMP_NUM_REGS 256
#define I2CDETECT_MODE_QUICK 1
#define I2CDETECT_MODE_READ 2
+/* linux/i2c-dev.h from i2c-tools overwrites the one from linux uapi
+ * and defines symbols already defined by linux/i2c.h.
+ * Also, it defines a bunch of static inlines which we would rather NOT
+ * inline. What a mess.
+ * We need only these definitions from linux/i2c-dev.h:
+ */
+#define I2C_SLAVE 0x0703
+#define I2C_SLAVE_FORCE 0x0706
+#define I2C_FUNCS 0x0705
+#define I2C_PEC 0x0708
+#define I2C_SMBUS 0x0720
+struct i2c_smbus_ioctl_data {
+ __u8 read_write;
+ __u8 command;
+ __u32 size;
+ union i2c_smbus_data *data;
+};
+/* end linux/i2c-dev.h */
+
/*
* This is needed for ioctl_or_perror_and_die() since it only accepts pointers.
*/
#if ENABLE_I2CGET
//usage:#define i2cget_trivial_usage
-//usage: "[-f] [-y] BUS CHIP-ADDRESS [DATA-ADDRESS [MODE]]"
+//usage: "[-fy] BUS CHIP-ADDRESS [DATA-ADDRESS [MODE]]"
//usage:#define i2cget_full_usage "\n\n"
-//usage: "Read from I2C/SMBus chip registers\n"
-//usage: "\n I2CBUS i2c bus number"
-//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "Read from I2C/SMBus chip registers"
+//usage: "\n"
+//usage: "\n I2CBUS I2C bus number"
+//usage: "\n ADDRESS 0x03-0x77"
//usage: "\nMODE is:"
-//usage: "\n b read byte data (default)"
-//usage: "\n w read word data"
-//usage: "\n c write byte/read byte"
+//usage: "\n b Read byte data (default)"
+//usage: "\n w Read word data"
+//usage: "\n c Write byte/read byte"
//usage: "\n Append p for SMBus PEC"
//usage: "\n"
-//usage: "\n -f force access"
-//usage: "\n -y disable interactive mode"
+//usage: "\n -f Force access"
+//usage: "\n -y Disable interactive mode"
int i2cget_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int i2cget_main(int argc UNUSED_PARAM, char **argv)
{
#if ENABLE_I2CSET
//usage:#define i2cset_trivial_usage
-//usage: "[-f] [-y] [-m MASK] BUS CHIP-ADDR DATA-ADDR [VALUE] ... [MODE]"
+//usage: "[-fy] [-m MASK] BUS CHIP-ADDRESS DATA-ADDRESS [VALUE] ... [MODE]"
//usage:#define i2cset_full_usage "\n\n"
-//usage: "Set I2C registers\n"
-//usage: "\n I2CBUS i2c bus number"
-//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "Set I2C registers"
+//usage: "\n"
+//usage: "\n I2CBUS I2C bus number"
+//usage: "\n ADDRESS 0x03-0x77"
//usage: "\nMODE is:"
-//usage: "\n c byte, no value"
-//usage: "\n b byte data (default)"
-//usage: "\n w word data"
+//usage: "\n c Byte, no value"
+//usage: "\n b Byte data (default)"
+//usage: "\n w Word data"
//usage: "\n i I2C block data"
//usage: "\n s SMBus block data"
//usage: "\n Append p for SMBus PEC"
//usage: "\n"
-//usage: "\n -f force access"
-//usage: "\n -y disable interactive mode"
-//usage: "\n -r read back and compare the result"
-//usage: "\n -m MASK mask specifying which bits to write"
+//usage: "\n -f Force access"
+//usage: "\n -y Disable interactive mode"
+//usage: "\n -r Read back and compare the result"
+//usage: "\n -m MASK Mask specifying which bits to write"
int i2cset_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int i2cset_main(int argc, char **argv)
{
}
//usage:#define i2cdump_trivial_usage
-//usage: "[-f] [-r FIRST-LAST] [-y] BUS ADDR [MODE]"
+//usage: "[-fy] [-r FIRST-LAST] BUS ADDR [MODE]"
//usage:#define i2cdump_full_usage "\n\n"
-//usage: "Examine I2C registers\n"
-//usage: "\n I2CBUS i2c bus number"
-//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "Examine I2C registers"
+//usage: "\n"
+//usage: "\n I2CBUS I2C bus number"
+//usage: "\n ADDRESS 0x03-0x77"
//usage: "\nMODE is:"
-//usage: "\n b byte (default)"
-//usage: "\n w word"
-//usage: "\n W word on even register addresses"
+//usage: "\n b Byte (default)"
+//usage: "\n w Word"
+//usage: "\n W Word on even register addresses"
//usage: "\n i I2C block"
//usage: "\n s SMBus block"
-//usage: "\n c consecutive byte"
+//usage: "\n c Consecutive byte"
//usage: "\n Append p for SMBus PEC"
//usage: "\n"
-//usage: "\n -f force access"
-//usage: "\n -y disable interactive mode"
-//usage: "\n -r limit the number of registers being accessed"
+//usage: "\n -f Force access"
+//usage: "\n -y Disable interactive mode"
+//usage: "\n -r Limit the number of registers being accessed"
int i2cdump_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int i2cdump_main(int argc UNUSED_PARAM, char **argv)
{
}
//usage:#define i2cdetect_trivial_usage
-//usage: "[-F I2CBUS] [-l] [-y] [-a] [-q|-r] I2CBUS [FIRST LAST]"
+//usage: "-l | -F I2CBUS | [-ya] [-q|-r] I2CBUS [FIRST LAST]"
//usage:#define i2cdetect_full_usage "\n\n"
-//usage: "Detect I2C chips.\n"
-//usage: "\n I2CBUS i2c bus number"
-//usage: "\n FIRST and LAST limit the probing range"
+//usage: "Detect I2C chips"
//usage: "\n"
-//usage: "\n -l output list of installed busses"
-//usage: "\n -y disable interactive mode"
-//usage: "\n -a force scanning of non-regular addresses"
-//usage: "\n -q use smbus quick write commands for probing (default)"
-//usage: "\n -r use smbus read byte commands for probing"
-//usage: "\n -F display list of functionalities"
+//usage: "\n -l List installed buses"
+//usage: "\n -F BUS# List functionalities on this bus"
+//usage: "\n -y Disable interactive mode"
+//usage: "\n -a Force scanning of non-regular addresses"
+//usage: "\n -q Use smbus quick write commands for probing (default)"
+//usage: "\n -r Use smbus read byte commands for probing"
+//usage: "\n FIRST and LAST limit probing range"
int i2cdetect_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int i2cdetect_main(int argc UNUSED_PARAM, char **argv)
{
opts = getopt32(argv, "^"
"yaqrFl"
"\0"
- "q--r:r--q:"/*mutually exclusive*/ "?3"/*up to 3 args*/
+ "q--r:r--q:"/*mutually exclusive*/
+ "?3"/*up to 3 args*/
);
argv += optind;
projects / oweals / busybox.git / blobdiff