$! Changes by Richard Levitte <richard@levitte.org>
$!
$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB" and if specified "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB".
+$! "[.xxx.EXE.SSL]LIBSSL.OLB"
$! The "xxx" denotes the machine architecture of AXP or VAX.
$!
$! This procedures accepts two command line options listed below.
$! BUILDINF Just build the "[.CRYPTO]BUILDINF.H" file.
$! SOFTLINKS Just fix the Unix soft links.
$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$! RSAREF Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! CRYPTO/x Just build the x part of the
$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
$!
$!
-$! Specify RSAREF as P2 to compile using the RSAREF Library.
-$! If you specify NORSAREF, it will compile without using RSAREF.
-$! (If in the United States, You Must Compile Using RSAREF).
-$!
-$! Note: The RSAREF libraries are NOT INCLUDED and you have to
-$! download it from "ftp://ftp.rsa.com/rsaref". You have to
-$! get the ".tar-Z" file as the ".zip" file dosen't have the
-$! directory structure stored. You have to extract the file
-$! into the [.RSAREF] directory as that is where the scripts
-$! will look for the files.
+$! P2 is ignored (it was used to denote if RSAref should be used or not,
+$! and is simply kept so surrounding scripts don't get confused)
$!
$! Speficy DEBUG or NODEBUG as P3 to compile with or without debugging
$! information.
$! If you don't speficy a compiler, it will try to determine which
$! "C" compiler to use.
$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
+$! P5, if defined, sets a TCP/IP library to use, through one of the following
+$! keywords:
$!
$! UCX for UCX or UCX emulation
+$! TCPIP for TCP/IP Services or TCP/IP Services emulation
+$! (this is prefered over UCX)
$! SOCKETSHR for SOCKETSHR+NETLIB
+$! NONE to avoid specifying which TCP/IP implementation to
+$! use at build time (this works with DEC C). This is
+$! the default.
$!
$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
$ THEN
$!
-$! Check To See If We Are Going To Be Building The
-$! [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ IF (RSAREF.EQS."RSAREF")
-$ THEN
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ GOSUB RSAREF
-$!
-$! End The RSAREF Check.
-$!
-$ ENDIF
-$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
$ GOSUB CRYPTO
$ WRITE H_FILE "#endif"
$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,-
NO_SHA,NO_SHA0,NO_SHA1,NO_DES/NO_MDC2;NO_MDC2,NO_RC2,NO_RC4,NO_RC5,-
- NO_IDEA,NO_BF,NO_CAST,NO_HMAC,NO_SSL2
+ NO_IDEA,NO_BF,NO_CAST,NO_HMAC,NO_SSL2,FIPS
$ CONFIG_LOG_I = 0
$ CONFIG_LOG_LOOP:
$ CONFIG_LOG_E1 = F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS)
$ THEN
$ TYPE [.CRYPTO]OPENSSLCONF_H.IN /OUTPUT=H_FILE:
$ ELSE
-$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
-$ EXIT 0
+$ ! For ODS-5
+$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H.IN") .NES. ""
+$ THEN
+$ TYPE [.CRYPTO]OPENSSLCONF.H.IN /OUTPUT=H_FILE:
+$ ELSE
+$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
+$ EXIT 0
+$ ENDIF
$ ENDIF
$ ENDIF
$ IF ARCH .EQS. "AXP"
$!
$ SOFTLINKS:
$!
-$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
+$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
+$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
$!
$ DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
$!
$! All The "C" Files That Are Currently There Now.
$!
$ DELETE SYS$DISK:[.TEST]*.C;*
+$ DELETE SYS$DISK:[.TEST]EVPTESTS.TXT;*
$!
$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
$!
$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
+$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
$!
$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
$!
$!
$ SDIRS := ,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,-
DES,RC2,RC4,RC5,IDEA,BF,CAST,-
- BN,RSA,DSA,DH,DSO,ENGINE,RIJNDAEL,-
+ BN,EC,RSA,DSA,DH,DSO,ENGINE,AES,-
BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP
-$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h
+ EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5
+$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h,-
+ ossl_typ.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_MDC2 := mdc2.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_DES := des.h
+$ EXHEADER_DES := des.h,des_old.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_RC5 := rc5.h
$ EXHEADER_BF := blowfish.h
$ EXHEADER_CAST := cast.h
$ EXHEADER_BN := bn.h
+$ EXHEADER_EC := ec.h
$ EXHEADER_RSA := rsa.h
$ EXHEADER_DSA := dsa.h
$ EXHEADER_DH := dh.h
$ EXHEADER_DSO := dso.h
$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_RIJNDAEL := rd_fst.h,rijndael.h
+$ EXHEADER_AES := aes.h
$ EXHEADER_BUFFER := buffer.h
$ EXHEADER_BIO := bio.h
$ EXHEADER_STACK := stack.h,safestack.h
$ EXHEADER_PKCS12 := pkcs12.h
$ EXHEADER_COMP := comp.h
$ EXHEADER_OCSP := ocsp.h
+$ EXHEADER_UI := ui.h,ui_compat.h
+$ EXHEADER_KRB5 := krb5_asn.h
$
$ I = 0
$ LOOP_SDIRS:
$ GOTO LOOP_SDIRS
$ LOOP_SDIRS_END:
$!
-$! Copy All The ".H" Files From The [.RSAREF] Directory.
-$!
-$! EXHEADER := rsaref.h
-$! COPY SYS$DISK:[.RSAREF]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,kssl.h
$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
$!
+$! Copy All The ".H" Files From The [.FIPS] Directories.
+$!
+$ FDIRS := ,SHA1,RAND,DES,AES,DSA,RSA
+$ EXHEADER_ := fips.h
+$ EXHEADER_SHA1 :=
+$ EXHEADER_RAND := fips_rand.h
+$ EXHEADER_DES :=
+$ EXHEADER_AES :=
+$ EXHEADER_DSA :=
+$ EXHEADER_RSA :=
+$
+$ I = 0
+$ LOOP_FDIRS:
+$ D = F$EDIT(F$ELEMENT(I, ",", FDIRS),"TRIM")
+$ I = I + 1
+$ IF D .EQS. "," THEN GOTO LOOP_FDIRS_END
+$ tmp = EXHEADER_'D'
+$ IF tmp .EQS. "" THEN GOTO LOOP_FDIRS
+$ IF D .EQS. ""
+$ THEN
+$ COPY [.FIPS]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
+$ ELSE
+$ COPY [.FIPS.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
+$ ENDIF
+$ GOTO LOOP_FDIRS
+$ LOOP_FDIRS_END:
+$!
$! Purge all doubles
$!
$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
-$ @CRYPTO-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
-$!
-$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!
-$ @CRYPTO-LIB APPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
$!
$! Go Back To The Main Directory.
$!
$ SET DEFAULT [-]
$!
-$! Time To RETURN.
-$!
-$ RETURN
+$! Go To The [.FIPS] Directory.
$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE Library.
+$ SET DEFAULT SYS$DISK:[.FIPS]
$!
-$ RSAREF:
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "RSAref glue library not built, since it's no longer needed"
-$ RETURN
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.RSAREF]LIBRSAGLUE.OLB Library."
-$!
-$! Go To The [.RSAREF] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.RSAREF]
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
+$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$!
+$ @FIPS-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
$!
-$ @RSAREF-LIB LIBRARY 'DEBUGGER' "''COMPILER'" 'ISSEVEN'
+$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
+$!
+$ @FIPS-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$ SET DEFAULT [-]
$!
-$! Time To Return.
+$! Time To RETURN.
$!
$ RETURN
$!
$!
$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
$!
-$ @SSL-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
$!
-$ @SSL-LIB SSL_TASK 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Test Programs.
$!
-$ @MAKETESTS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEAPPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
.OR.(P1.EQS."BUILDALL") -
- .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL").OR.(P1.EQS."RSAREF") -
+ .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
.OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS")
$ THEN
$!
$!
$ ENDIF
$!
-$! Check To See If P2 Is Blank.
-$!
-$ P2 = "NORSAREF"
-$ IF (P2.EQS."NORSAREF")
-$ THEN
-$!
-$! P2 Is NORSAREF, So Compile Without RSAREF.
-$!
-$ RSAREF = "NORSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile Using The RSAREF Library.
-$!
-$ IF (P2.EQS."RSAREF")
-$ THEN
-$!
-$! Compile With RSAREF Library.
-$!
-$ RSAREF = "RSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " RSAREF : To Compile With The RSAREF Library."
-$ WRITE SYS$OUTPUT " NORSAREF : To Compile With The Regular RSA Library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Arguemnt Check.
-$!
-$ ENDIF
-$!
-$! End The P2 Check.
-$!
-$ ENDIF
-$!
$! Check To See If P3 Is Blank.
$!
$ IF (P3.EQS."NODEBUG")
$!
$! Time to check the contents of P5, and to make sure we get the correct library.
$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX"
+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
+ .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
$ THEN
$!
$! Check to see if SOCKETSHR was chosen
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
$!
$! Tell the user
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
$!
$! Tell the user
$!
$!
$ ENDIF
$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF P5.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF P5.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
+$!
+$! Done with NONE.
+$!
+$ ENDIF
+$!
$! Set the TCPIP_TYPE symbol
$!
$ TCPIP_TYPE = P5
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
+$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$ EXIT
$ ELSE
$!
+$! If TCPIP is not defined, then hardcode it to make
+$! it clear that no TCPIP is desired.
+$!
+$ IF P5 .EQS. ""
+$ THEN
+$ TCPIP_LIB = ""
+$ TCPIP_TYPE = "NONE"
+$ ELSE
+$!
$! Set the TCPIP_TYPE symbol
$!
-$ TCPIP_TYPE = P5
+$ TCPIP_TYPE = P5
+$ ENDIF
$ ENDIF
$!
$! Done with TCP/IP libraries