/* vi: set sw=4 ts=4: */
/*
- * Termios command line History and Editing.
+ * Command line editing.
*
* Copyright (c) 1986-2003 may safely be consumed by a BSD or GPL license.
* Written by: Vladimir Oleynik <dzo@simtreas.ru>
* and the \] escape to signal the end of such a sequence. Example:
*
* PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
+ *
+ * Unicode in PS1 is not fully supported: prompt length calulation is wrong,
+ * resulting in line wrap problems with long (multi-line) input.
+ *
+ * Multi-line PS1 (e.g. PS1="\n[\w]\n$ ") has problems with history
+ * browsing: up/down arrows result in scrolling.
+ * It stems from simplistic "cmdedit_y = cmdedit_prmt_len / cmdedit_termw"
+ * calculation of how many lines the prompt takes.
*/
#include "libbb.h"
#include "unicode.h"
+#ifndef _POSIX_VDISABLE
+# define _POSIX_VDISABLE '\0'
+#endif
+
#ifdef TEST
# define ENABLE_FEATURE_EDITING 0
#if ENABLE_FEATURE_EDITING
-#define ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR \
+#define ENABLE_USERNAME_OR_HOMEDIR \
(ENABLE_FEATURE_USERNAME_COMPLETION || ENABLE_FEATURE_EDITING_FANCY_PROMPT)
-#define IF_FEATURE_GETUSERNAME_AND_HOMEDIR(...)
-#if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
-#undef IF_FEATURE_GETUSERNAME_AND_HOMEDIR
-#define IF_FEATURE_GETUSERNAME_AND_HOMEDIR(...) __VA_ARGS__
+#define IF_USERNAME_OR_HOMEDIR(...)
+#if ENABLE_USERNAME_OR_HOMEDIR
+# undef IF_USERNAME_OR_HOMEDIR
+# define IF_USERNAME_OR_HOMEDIR(...) __VA_ARGS__
#endif
-#define SEQ_CLEAR_TILL_END_OF_SCREEN "\033[J"
-//#define SEQ_CLEAR_TILL_END_OF_LINE "\033[K"
-
-
#undef CHAR_T
#if ENABLE_UNICODE_SUPPORT
# define BB_NUL ((wchar_t)0)
# define BB_isalnum(c) isalnum(c)
# define BB_ispunct(c) ispunct(c)
#endif
+#if ENABLE_UNICODE_PRESERVE_BROKEN
+# define unicode_mark_raw_byte(wc) ((wc) | 0x20000000)
+# define unicode_is_raw_byte(wc) ((wc) & 0x20000000)
+#else
+# define unicode_is_raw_byte(wc) 0
+#endif
-# if ENABLE_UNICODE_PRESERVE_BROKEN
-# define unicode_mark_raw_byte(wc) ((wc) | 0x20000000)
-# define unicode_is_raw_byte(wc) ((wc) & 0x20000000)
-# else
-# define unicode_is_raw_byte(wc) 0
-# endif
+#define ESC "\033"
+
+#define SEQ_CLEAR_TILL_END_OF_SCREEN ESC"[J"
+//#define SEQ_CLEAR_TILL_END_OF_LINE ESC"[K"
enum {
- /* We use int16_t for positions, need to limit line len */
MAX_LINELEN = CONFIG_FEATURE_EDITING_MAX_LEN < 0x7ff0
? CONFIG_FEATURE_EDITING_MAX_LEN
: 0x7ff0
};
-#if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
+#if ENABLE_USERNAME_OR_HOMEDIR
static const char null_str[] ALIGN1 = "";
#endif
CHAR_T *command_ps;
const char *cmdedit_prompt;
-#if ENABLE_FEATURE_EDITING_FANCY_PROMPT
- int num_ok_lines; /* = 1; */
-#endif
-#if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
+#if ENABLE_USERNAME_OR_HOMEDIR
char *user_buf;
char *home_pwd_buf; /* = (char*)null_str; */
#endif
#endif
#if ENABLE_FEATURE_EDITING_VI
-#define DELBUFSIZ 128
+# define DELBUFSIZ 128
CHAR_T *delptr;
smallint newdelflag; /* whether delbuf should be reused yet */
CHAR_T delbuf[DELBUFSIZ]; /* a place to store deleted characters */
#if ENABLE_FEATURE_EDITING_ASK_TERMINAL
smallint sent_ESC_br6n;
#endif
-
- /* Formerly these were big buffers on stack: */
-#if ENABLE_FEATURE_TAB_COMPLETION
- char exe_n_cwd_tab_completion__dirbuf[MAX_LINELEN];
- char input_tab__matchBuf[MAX_LINELEN];
- int16_t find_match__int_buf[MAX_LINELEN + 1]; /* need to have 9 bits at least */
- int16_t find_match__pos_buf[MAX_LINELEN + 1];
-#endif
};
/* See lineedit_ptr_hack.c */
#define command_len (S.command_len )
#define command_ps (S.command_ps )
#define cmdedit_prompt (S.cmdedit_prompt )
-#define num_ok_lines (S.num_ok_lines )
#define user_buf (S.user_buf )
#define home_pwd_buf (S.home_pwd_buf )
#define matches (S.matches )
(*(struct lineedit_statics**)&lineedit_ptr_to_statics) = xzalloc(sizeof(S)); \
barrier(); \
cmdedit_termw = 80; \
- IF_FEATURE_EDITING_FANCY_PROMPT(num_ok_lines = 1;) \
- IF_FEATURE_GETUSERNAME_AND_HOMEDIR(home_pwd_buf = (char*)null_str;) \
+ IF_USERNAME_OR_HOMEDIR(home_pwd_buf = (char*)null_str;) \
+ IF_FEATURE_EDITING_VI(delptr = delbuf;) \
} while (0)
+
static void deinit_S(void)
{
#if ENABLE_FEATURE_EDITING_FANCY_PROMPT
/* This one is allocated only if FANCY_PROMPT is on
- * (otherwise it points to verbatim prompt (NOT malloced) */
+ * (otherwise it points to verbatim prompt (NOT malloced)) */
free((char*)cmdedit_prompt);
#endif
-#if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
+#if ENABLE_USERNAME_OR_HOMEDIR
free(user_buf);
if (home_pwd_buf != null_str)
free(home_pwd_buf);
#if ENABLE_UNICODE_SUPPORT
-static size_t load_string(const char *src, int maxsize)
+static size_t load_string(const char *src)
{
- ssize_t len = mbstowcs(command_ps, src, maxsize - 1);
- if (len < 0)
- len = 0;
- command_ps[len] = 0;
- return len;
+ if (unicode_status == UNICODE_ON) {
+ ssize_t len = mbstowcs(command_ps, src, S.maxsize - 1);
+ if (len < 0)
+ len = 0;
+ command_ps[len] = BB_NUL;
+ return len;
+ } else {
+ unsigned i = 0;
+ while (src[i] && i < S.maxsize - 1) {
+ command_ps[i] = src[i];
+ i++;
+ }
+ command_ps[i] = BB_NUL;
+ return i;
+ }
}
static unsigned save_string(char *dst, unsigned maxsize)
{
+ if (unicode_status == UNICODE_ON) {
# if !ENABLE_UNICODE_PRESERVE_BROKEN
- ssize_t len = wcstombs(dst, command_ps, maxsize - 1);
- if (len < 0)
- len = 0;
- dst[len] = '\0';
- return len;
+ ssize_t len = wcstombs(dst, command_ps, maxsize - 1);
+ if (len < 0)
+ len = 0;
+ dst[len] = '\0';
+ return len;
# else
- unsigned dstpos = 0;
- unsigned srcpos = 0;
-
- maxsize--;
- while (dstpos < maxsize) {
- wchar_t wc;
- int n = srcpos;
- while ((wc = command_ps[srcpos]) != 0
- && !unicode_is_raw_byte(wc)
- ) {
+ unsigned dstpos = 0;
+ unsigned srcpos = 0;
+
+ maxsize--;
+ while (dstpos < maxsize) {
+ wchar_t wc;
+ int n = srcpos;
+
+ /* Convert up to 1st invalid byte (or up to end) */
+ while ((wc = command_ps[srcpos]) != BB_NUL
+ && !unicode_is_raw_byte(wc)
+ ) {
+ srcpos++;
+ }
+ command_ps[srcpos] = BB_NUL;
+ n = wcstombs(dst + dstpos, command_ps + n, maxsize - dstpos);
+ if (n < 0) /* should not happen */
+ break;
+ dstpos += n;
+ if (wc == BB_NUL) /* usually is */
+ break;
+
+ /* We do have invalid byte here! */
+ command_ps[srcpos] = wc; /* restore it */
srcpos++;
+ if (dstpos == maxsize)
+ break;
+ dst[dstpos++] = (char) wc;
}
- command_ps[srcpos] = 0;
- n = wcstombs(dst + dstpos, command_ps + n, maxsize - dstpos);
- if (n < 0) /* should not happen */
- break;
- dstpos += n;
- if (wc == 0) /* usually is */
- break;
- /* We do have invalid byte here! */
- command_ps[srcpos] = wc; /* restore it */
- srcpos++;
- if (dstpos == maxsize)
- break;
- dst[dstpos++] = (char) wc;
- }
- dst[dstpos] = '\0';
- return dstpos;
+ dst[dstpos] = '\0';
+ return dstpos;
# endif
+ } else {
+ unsigned i = 0;
+ while ((dst[i] = command_ps[i]) != 0)
+ i++;
+ return i;
+ }
}
/* I thought just fputwc(c, stdout) would work. But no... */
static void BB_PUTCHAR(wchar_t c)
{
- char buf[MB_CUR_MAX + 1];
- mbstate_t mbst = { 0 };
- ssize_t len;
-
- len = wcrtomb(buf, c, &mbst);
- if (len > 0) {
- buf[len] = '\0';
- fputs(buf, stdout);
+ if (unicode_status == UNICODE_ON) {
+ char buf[MB_CUR_MAX + 1];
+ mbstate_t mbst = { 0 };
+ ssize_t len = wcrtomb(buf, c, &mbst);
+ if (len > 0) {
+ buf[len] = '\0';
+ fputs(buf, stdout);
+ }
+ } else {
+ /* In this case, c is always one byte */
+ putchar(c);
}
}
# if ENABLE_UNICODE_COMBINING_WCHARS || ENABLE_UNICODE_WIDE_WCHARS
int w = 1;
if (unicode_status == UNICODE_ON) {
- if (unicode_is_raw_byte(wc)
- || (CONFIG_LAST_SUPPORTED_WCHAR && wc > CONFIG_LAST_SUPPORTED_WCHAR)
- ) {
+ if (wc > CONFIG_LAST_SUPPORTED_WCHAR) {
+ /* note: also true for unicode_is_raw_byte(wc) */
goto subst;
}
w = wcwidth(wc);
return wc;
}
#else /* !UNICODE */
-static size_t load_string(const char *src, int maxsize)
+static size_t load_string(const char *src)
{
- safe_strncpy(command_ps, src, maxsize);
+ safe_strncpy(command_ps, src, S.maxsize);
return strlen(command_ps);
}
# if ENABLE_FEATURE_TAB_COMPLETION
static void goto_new_line(void)
{
put_till_end_and_adv_cursor();
- if (cmdedit_x)
+ if (cmdedit_x != 0)
bb_putchar('\n');
}
-
-static void out1str(const char *s)
+static void beep(void)
{
- if (s)
- fputs(s, stdout);
+ bb_putchar('\007');
}
-static void beep(void)
+static void put_prompt(void)
{
- bb_putchar('\007');
+ unsigned w;
+
+ fputs(cmdedit_prompt, stdout);
+ fflush_all();
+ cursor = 0;
+ w = cmdedit_termw; /* read volatile var once */
+ cmdedit_y = cmdedit_prmt_len / w; /* new quasireal y */
+ cmdedit_x = cmdedit_prmt_len % w;
}
/* Move back one character */
/* (optimized for slow terminals) */
static void input_backward(unsigned num)
{
- int count_y;
-
if (num > cursor)
num = cursor;
if (num == 0)
} while (--num);
return;
}
- printf("\033[%uD", num);
+ printf(ESC"[%uD", num);
return;
}
/* Need to go one or more lines up */
-//FIXME: this does not work correctly if prev line has one "unfilled" screen position
-//caused by wide unicode char not fitting in that one screen position.
- num -= cmdedit_x;
- {
- unsigned w = cmdedit_termw; /* volatile var */
- count_y = 1 + (num / w);
- cmdedit_y -= count_y;
- cmdedit_x = w * count_y - num;
+ if (ENABLE_UNICODE_WIDE_WCHARS) {
+ /* With wide chars, it is hard to "backtrack"
+ * and reliably figure out where to put cursor.
+ * Example (<> is a wide char; # is an ordinary char, _ cursor):
+ * |prompt: <><> |
+ * |<><><><><><> |
+ * |_ |
+ * and user presses left arrow. num = 1, cmdedit_x = 0,
+ * We need to go up one line, and then - how do we know that
+ * we need to go *10* positions to the right? Because
+ * |prompt: <>#<>|
+ * |<><><>#<><><>|
+ * |_ |
+ * in this situation we need to go *11* positions to the right.
+ *
+ * A simpler thing to do is to redraw everything from the start
+ * up to new cursor position (which is already known):
+ */
+ unsigned sv_cursor;
+ /* go to 1st column; go up to first line */
+ printf("\r" ESC"[%uA", cmdedit_y);
+ cmdedit_y = 0;
+ sv_cursor = cursor;
+ put_prompt(); /* sets cursor to 0 */
+ while (cursor < sv_cursor)
+ put_cur_glyph_and_inc_cursor();
+ } else {
+ int lines_up;
+ unsigned width;
+ /* num = chars to go back from the beginning of current line: */
+ num -= cmdedit_x;
+ width = cmdedit_termw; /* read volatile var once */
+ /* num=1...w: one line up, w+1...2w: two, etc: */
+ lines_up = 1 + (num - 1) / width;
+ cmdedit_x = (width * cmdedit_y - num) % width;
+ cmdedit_y -= lines_up;
+ /* go to 1st column; go up */
+ printf("\r" ESC"[%uA", lines_up);
+ /* go to correct column.
+ * xterm, konsole, Linux VT interpret 0 as 1 below! wow.
+ * need to *make sure* we skip it if cmdedit_x == 0 */
+ if (cmdedit_x)
+ printf(ESC"[%uC", cmdedit_x);
}
- /* go to 1st column; go up; go to correct column */
- printf("\r" "\033[%dA" "\033[%dC", count_y, cmdedit_x);
-}
-
-static void put_prompt(void)
-{
- unsigned w;
-
- out1str(cmdedit_prompt);
- fflush_all();
- cursor = 0;
- w = cmdedit_termw; /* read volatile var once */
- cmdedit_y = cmdedit_prmt_len / w; /* new quasireal y */
- cmdedit_x = cmdedit_prmt_len % w;
}
/* draw prompt, editor line, and clear tail */
static void redraw(int y, int back_cursor)
{
- if (y > 0) /* up to start y */
- printf("\033[%uA", y);
+ if (y > 0) /* up y lines */
+ printf(ESC"[%uA", y);
bb_putchar('\r');
put_prompt();
put_till_end_and_adv_cursor();
#if ENABLE_FEATURE_TAB_COMPLETION
+//FIXME:
+//needs to be more clever: currently it thinks that "foo\ b<TAB>
+//matches the file named "foo bar", which is untrue.
+//Also, perhaps "foo b<TAB> needs to complete to "foo bar" <cursor>,
+//not "foo bar <cursor>...
+
static void free_tab_completion_data(void)
{
if (matches) {
num_matches++;
}
-#if ENABLE_FEATURE_USERNAME_COMPLETION
-static void username_tab_completion(char *ud, char *with_shash_flg)
+# if ENABLE_FEATURE_USERNAME_COMPLETION
+/* Replace "~user/..." with "/homedir/...".
+ * The parameter is malloced, free it or return it
+ * unchanged if no user is matched.
+ */
+static char *username_path_completion(char *ud)
{
struct passwd *entry;
- int userlen;
+ char *tilde_name = ud;
+ char *home = NULL;
- ud++; /* ~user/... to user/... */
- userlen = strlen(ud);
+ ud++; /* skip ~ */
+ if (*ud == '/') { /* "~/..." */
+ home = home_pwd_buf;
+ } else {
+ /* "~user/..." */
+ ud = strchr(ud, '/');
+ *ud = '\0'; /* "~user" */
+ entry = getpwnam(tilde_name + 1);
+ *ud = '/'; /* restore "~user/..." */
+ if (entry)
+ home = entry->pw_dir;
+ }
+ if (home) {
+ ud = concat_path_file(home, ud);
+ free(tilde_name);
+ tilde_name = ud;
+ }
+ return tilde_name;
+}
- if (with_shash_flg) { /* "~/..." or "~user/..." */
- char *sav_ud = ud - 1;
- char *home = NULL;
+/* ~use<tab> - find all users with this prefix.
+ * Return the length of the prefix used for matching.
+ */
+static NOINLINE unsigned complete_username(const char *ud)
+{
+ /* Using _r function to avoid pulling in static buffers */
+ char line_buff[256];
+ struct passwd pwd;
+ struct passwd *result;
+ unsigned userlen;
- if (*ud == '/') { /* "~/..." */
- home = home_pwd_buf;
- } else {
- /* "~user/..." */
- char *temp;
- temp = strchr(ud, '/');
- *temp = '\0'; /* ~user\0 */
- entry = getpwnam(ud);
- *temp = '/'; /* restore ~user/... */
- ud = temp;
- if (entry)
- home = entry->pw_dir;
- }
- if (home) {
- if ((userlen + strlen(home) + 1) < MAX_LINELEN) {
- /* /home/user/... */
- sprintf(sav_ud, "%s%s", home, ud);
- }
- }
- } else {
- /* "~[^/]*" */
- /* Using _r function to avoid pulling in static buffers */
- char line_buff[256];
- struct passwd pwd;
- struct passwd *result;
-
- setpwent();
- while (!getpwent_r(&pwd, line_buff, sizeof(line_buff), &result)) {
- /* Null usernames should result in all users as possible completions. */
- if (/*!userlen || */ strncmp(ud, pwd.pw_name, userlen) == 0) {
- add_match(xasprintf("~%s/", pwd.pw_name));
- }
+ ud++; /* skip ~ */
+ userlen = strlen(ud);
+
+ setpwent();
+ while (!getpwent_r(&pwd, line_buff, sizeof(line_buff), &result)) {
+ /* Null usernames should result in all users as possible completions. */
+ if (/*!userlen || */ strncmp(ud, pwd.pw_name, userlen) == 0) {
+ add_match(xasprintf("~%s/", pwd.pw_name));
}
- endpwent();
}
+ endpwent();
+
+ return 1 + userlen;
}
-#endif /* FEATURE_COMMAND_USERNAME_COMPLETION */
+# endif /* FEATURE_USERNAME_COMPLETION */
enum {
FIND_EXE_ONLY = 0,
FIND_FILE_ONLY = 2,
};
-static int path_parse(char ***p, int flags)
+static int path_parse(char ***p)
{
int npth;
const char *pth;
char *tmp;
char **res;
- /* if not setenv PATH variable, to search cur dir "." */
- if (flags != FIND_EXE_ONLY)
- return 1;
-
if (state->flags & WITH_PATH_LOOKUP)
pth = state->path_lookup;
else
pth = getenv("PATH");
- /* PATH=<empty> or PATH=:<empty> */
+
+ /* PATH="" or PATH=":"? */
if (!pth || !pth[0] || LONE_CHAR(pth, ':'))
return 1;
tmp = strchr(tmp, ':');
if (!tmp)
break;
- if (*++tmp == '\0')
+ tmp++;
+ if (*tmp == '\0')
break; /* :<empty> */
npth++;
}
- res = xmalloc(npth * sizeof(char*));
+ *p = res = xmalloc(npth * sizeof(res[0]));
res[0] = tmp = xstrdup(pth);
npth = 1;
while (1) {
break; /* :<empty> */
res[npth++] = tmp;
}
- *p = res;
return npth;
}
-static void exe_n_cwd_tab_completion(char *command, int type)
+/* Complete command, directory or file name.
+ * Return the length of the prefix used for matching.
+ */
+static NOINLINE unsigned complete_cmd_dir_file(const char *command, int type)
{
- DIR *dir;
- struct dirent *next;
- struct stat st;
char *path1[1];
char **paths = path1;
int npaths;
int i;
- char *found;
- char *pfind = strrchr(command, '/');
-/* char dirbuf[MAX_LINELEN]; */
-#define dirbuf (S.exe_n_cwd_tab_completion__dirbuf)
+ unsigned pf_len;
+ const char *pfind;
+ char *dirbuf = NULL;
npaths = 1;
path1[0] = (char*)".";
- if (pfind == NULL) {
- /* no dir, if flags==EXE_ONLY - get paths, else "." */
- npaths = path_parse(&paths, type);
+ pfind = strrchr(command, '/');
+ if (!pfind) {
+ if (type == FIND_EXE_ONLY)
+ npaths = path_parse(&paths);
pfind = command;
} else {
- /* dirbuf = ".../.../.../" */
- safe_strncpy(dirbuf, command, (pfind - command) + 2);
-#if ENABLE_FEATURE_USERNAME_COMPLETION
- if (dirbuf[0] == '~') /* ~/... or ~user/... */
- username_tab_completion(dirbuf, dirbuf);
-#endif
- paths[0] = dirbuf;
/* point to 'l' in "..../last_component" */
pfind++;
+ /* dirbuf = ".../.../.../" */
+ dirbuf = xstrndup(command, pfind - command);
+# if ENABLE_FEATURE_USERNAME_COMPLETION
+ if (dirbuf[0] == '~') /* ~/... or ~user/... */
+ dirbuf = username_path_completion(dirbuf);
+# endif
+ path1[0] = dirbuf;
}
+ pf_len = strlen(pfind);
for (i = 0; i < npaths; i++) {
+ DIR *dir;
+ struct dirent *next;
+ struct stat st;
+ char *found;
+
dir = opendir(paths[i]);
if (!dir)
continue; /* don't print an error */
while ((next = readdir(dir)) != NULL) {
- int len1;
- const char *str_found = next->d_name;
+ unsigned len;
+ const char *name_found = next->d_name;
- /* matched? */
- if (strncmp(str_found, pfind, strlen(pfind)))
+ /* .../<tab>: bash 3.2.0 shows dotfiles, but not . and .. */
+ if (!pfind[0] && DOT_OR_DOTDOT(name_found))
continue;
- /* not see .name without .match */
- if (*str_found == '.' && *pfind == '\0') {
- if (NOT_LONE_CHAR(paths[i], '/') || str_found[1])
- continue;
- str_found = ""; /* only "/" */
- }
- found = concat_path_file(paths[i], str_found);
- /* hmm, remove in progress? */
+ /* match? */
+ if (strncmp(name_found, pfind, pf_len) != 0)
+ continue; /* no */
+
+ found = concat_path_file(paths[i], name_found);
/* NB: stat() first so that we see is it a directory;
* but if that fails, use lstat() so that
* we still match dangling links */
if (stat(found, &st) && lstat(found, &st))
- goto cont;
- /* find with dirs? */
- if (paths[i] != dirbuf)
- strcpy(found, next->d_name); /* only name */
+ goto cont; /* hmm, remove in progress? */
- len1 = strlen(found);
- found = xrealloc(found, len1 + 2);
- found[len1] = '\0';
- found[len1+1] = '\0';
+ /* Save only name */
+ len = strlen(name_found);
+ found = xrealloc(found, len + 2); /* +2: for slash and NUL */
+ strcpy(found, name_found);
if (S_ISDIR(st.st_mode)) {
- /* name is a directory */
- if (found[len1-1] != '/') {
- found[len1] = '/';
- }
+ /* name is a directory, add slash */
+ found[len] = '/';
+ found[len + 1] = '\0';
} else {
- /* not put found file if search only dirs for cd */
+ /* skip files if looking for dirs only (example: cd) */
if (type == FIND_DIR_ONLY)
goto cont;
}
- /* Add it to the list */
+ /* add it to the list */
add_match(found);
continue;
cont:
free(found);
}
closedir(dir);
- }
+ } /* for every path */
+
if (paths != path1) {
free(paths[0]); /* allocated memory is only in first member */
free(paths);
}
-#undef dirbuf
+ free(dirbuf);
+
+ return pf_len;
}
+/* build_match_prefix:
+ * On entry, match_buf contains everything up to cursor at the moment <tab>
+ * was pressed. This function looks at it, figures out what part of it
+ * constitutes the command/file/directory prefix to use for completion,
+ * and rewrites match_buf to contain only that part.
+ */
+#define dbg_bmp 0
+/* Helpers: */
/* QUOT is used on elements of int_buf[], which are bytes,
* not Unicode chars. Therefore it works correctly even in Unicode mode.
*/
#define QUOT (UCHAR_MAX+1)
-
-#define int_buf (S.find_match__int_buf)
-#define pos_buf (S.find_match__pos_buf)
-/* is must be <= in */
-static void collapse_pos(int is, int in)
+static void remove_chunk(int16_t *int_buf, int beg, int end)
{
- memmove(int_buf+is, int_buf+in, (MAX_LINELEN+1-in)*sizeof(int_buf[0]));
- memmove(pos_buf+is, pos_buf+in, (MAX_LINELEN+1-in)*sizeof(pos_buf[0]));
+ /* beg must be <= end */
+ if (beg == end)
+ return;
+
+ while ((int_buf[beg] = int_buf[end]) != 0)
+ beg++, end++;
+
+ if (dbg_bmp) {
+ int i;
+ for (i = 0; int_buf[i]; i++)
+ bb_putchar((unsigned char)int_buf[i]);
+ bb_putchar('\n');
+ }
}
-static NOINLINE int find_match(char *matchBuf, int *len_with_quotes)
+/* Caller ensures that match_buf points to a malloced buffer
+ * big enough to hold strlen(match_buf)*2 + 2
+ */
+static NOINLINE int build_match_prefix(char *match_buf)
{
int i, j;
int command_mode;
- int c, c2;
-/* Were local, but it uses too much stack */
-/* int16_t int_buf[MAX_LINELEN + 1]; */
-/* int16_t pos_buf[MAX_LINELEN + 1]; */
-
- /* set to integer dimension characters and own positions */
- for (i = 0;; i++) {
- int_buf[i] = (unsigned char)matchBuf[i];
- if (int_buf[i] == 0) {
- pos_buf[i] = -1; /* end-fo-line indicator */
- break;
- }
- pos_buf[i] = i;
- }
+ int16_t *int_buf = (int16_t*)match_buf;
- /* mask \+symbol and convert '\t' to ' ' */
- for (i = j = 0; matchBuf[i]; i++, j++) {
- if (matchBuf[i] == '\\') {
- collapse_pos(j, j + 1);
- int_buf[j] |= QUOT;
- i++;
+ if (dbg_bmp) printf("\n%s\n", match_buf);
+
+ /* Copy in reverse order, since they overlap */
+ i = strlen(match_buf);
+ do {
+ int_buf[i] = (unsigned char)match_buf[i];
+ i--;
+ } while (i >= 0);
+
+ /* Mark every \c as "quoted c" */
+ for (i = 0; int_buf[i]; i++) {
+ if (int_buf[i] == '\\') {
+ remove_chunk(int_buf, i, i + 1);
+ int_buf[i] |= QUOT;
}
}
- /* mask "symbols" or 'symbols' */
- c2 = 0;
- for (i = 0; int_buf[i]; i++) {
- c = int_buf[i];
- if (c == '\'' || c == '"') {
- if (c2 == 0)
- c2 = c;
- else {
- if (c == c2)
- c2 = 0;
- else
- int_buf[i] |= QUOT;
+ /* Quote-mark "chars" and 'chars', drop delimiters */
+ {
+ int in_quote = 0;
+ i = 0;
+ while (int_buf[i]) {
+ int cur = int_buf[i];
+ if (!cur)
+ break;
+ if (cur == '\'' || cur == '"') {
+ if (!in_quote || (cur == in_quote)) {
+ in_quote ^= cur;
+ remove_chunk(int_buf, i, i + 1);
+ continue;
+ }
}
- } else if (c2 != 0 && c != '$')
- int_buf[i] |= QUOT;
+ if (in_quote)
+ int_buf[i] = cur | QUOT;
+ i++;
+ }
}
- /* skip commands with arguments if line has commands delimiters */
- /* ';' ';;' '&' '|' '&&' '||' but `>&' `<&' `>|' */
+ /* Remove everything up to command delimiters:
+ * ';' ';;' '&' '|' '&&' '||',
+ * but careful with '>&' '<&' '>|'
+ */
for (i = 0; int_buf[i]; i++) {
- c = int_buf[i];
- c2 = int_buf[i + 1];
- j = i ? int_buf[i - 1] : -1;
- command_mode = 0;
- if (c == ';' || c == '&' || c == '|') {
- command_mode = 1 + (c == c2);
- if (c == '&') {
- if (j == '>' || j == '<')
- command_mode = 0;
- } else if (c == '|' && j == '>')
- command_mode = 0;
- }
- if (command_mode) {
- collapse_pos(0, i + command_mode);
- i = -1; /* hack incremet */
+ int cur = int_buf[i];
+ if (cur == ';' || cur == '&' || cur == '|') {
+ int prev = i ? int_buf[i - 1] : 0;
+ if (cur == '&' && (prev == '>' || prev == '<')) {
+ continue;
+ } else if (cur == '|' && prev == '>') {
+ continue;
+ }
+ remove_chunk(int_buf, 0, i + 1 + (cur == int_buf[i + 1]));
+ i = -1; /* back to square 1 */
}
}
- /* collapse `command...` */
+ /* Remove all `cmd` */
for (i = 0; int_buf[i]; i++) {
if (int_buf[i] == '`') {
- for (j = i + 1; int_buf[j]; j++)
+ for (j = i + 1; int_buf[j]; j++) {
if (int_buf[j] == '`') {
- collapse_pos(i, j + 1);
- j = 0;
- break;
+ /* `cmd` should count as a word:
+ * `cmd` c<tab> should search for files c*,
+ * not commands c*. Therefore we don't drop
+ * `cmd` entirely, we replace it with single `.
+ */
+ remove_chunk(int_buf, i, j);
+ goto next;
}
- if (j) {
- /* not found closing ` - command mode, collapse all previous */
- collapse_pos(0, i + 1);
- break;
- } else
- i--; /* hack incremet */
+ }
+ /* No closing ` - command mode, remove all up to ` */
+ remove_chunk(int_buf, 0, i + 1);
+ break;
+ next: ;
}
}
- /* collapse (command...(command...)...) or {command...{command...}...} */
- c = 0; /* "recursive" level */
- c2 = 0;
+ /* Remove "cmd (" and "cmd {"
+ * Example: "if { c<tab>"
+ * In this example, c should be matched as command pfx.
+ */
for (i = 0; int_buf[i]; i++) {
if (int_buf[i] == '(' || int_buf[i] == '{') {
- if (int_buf[i] == '(')
- c++;
- else
- c2++;
- collapse_pos(0, i + 1);
- i = -1; /* hack incremet */
- }
- }
- for (i = 0; pos_buf[i] >= 0 && (c > 0 || c2 > 0); i++) {
- if ((int_buf[i] == ')' && c > 0) || (int_buf[i] == '}' && c2 > 0)) {
- if (int_buf[i] == ')')
- c--;
- else
- c2--;
- collapse_pos(0, i + 1);
- i = -1; /* hack incremet */
+ remove_chunk(int_buf, 0, i + 1);
+ i = -1; /* back to square 1 */
}
}
- /* skip first not quote space */
+ /* Remove leading unquoted spaces */
for (i = 0; int_buf[i]; i++)
if (int_buf[i] != ' ')
break;
- if (i)
- collapse_pos(0, i);
+ remove_chunk(int_buf, 0, i);
- /* set find mode for completion */
+ /* Determine completion mode */
command_mode = FIND_EXE_ONLY;
for (i = 0; int_buf[i]; i++) {
if (int_buf[i] == ' ' || int_buf[i] == '<' || int_buf[i] == '>') {
- if (int_buf[i] == ' ' && command_mode == FIND_EXE_ONLY
- && matchBuf[pos_buf[0]] == 'c'
- && matchBuf[pos_buf[1]] == 'd'
+ if (int_buf[i] == ' '
+ && command_mode == FIND_EXE_ONLY
+ && (char)int_buf[0] == 'c'
+ && (char)int_buf[1] == 'd'
+ && i == 2 /* -> int_buf[2] == ' ' */
) {
command_mode = FIND_DIR_ONLY;
} else {
}
}
}
- for (i = 0; int_buf[i]; i++)
- /* "strlen" */;
- /* find last word */
+ if (dbg_bmp) printf("command_mode(0:exe/1:dir/2:file):%d\n", command_mode);
+
+ /* Remove everything except last word */
+ for (i = 0; int_buf[i]; i++) /* quasi-strlen(int_buf) */
+ continue;
for (--i; i >= 0; i--) {
- c = int_buf[i];
- if (c == ' ' || c == '<' || c == '>' || c == '|' || c == '&') {
- collapse_pos(0, i + 1);
+ int cur = int_buf[i];
+ if (cur == ' ' || cur == '<' || cur == '>' || cur == '|' || cur == '&') {
+ remove_chunk(int_buf, 0, i + 1);
break;
}
}
- /* skip first not quoted '\'' or '"' */
- for (i = 0; int_buf[i] == '\'' || int_buf[i] == '"'; i++)
- /*skip*/;
- /* collapse quote or unquote // or /~ */
- while ((int_buf[i] & ~QUOT) == '/'
- && ((int_buf[i+1] & ~QUOT) == '/' || (int_buf[i+1] & ~QUOT) == '~')
- ) {
+
+ /* Convert back to string of _chars_ */
+ i = 0;
+ while ((match_buf[i] = int_buf[i]) != '\0')
i++;
- }
- /* set only match and destroy quotes */
- j = 0;
- for (c = 0; pos_buf[i] >= 0; i++) {
- matchBuf[c++] = matchBuf[pos_buf[i]];
- j = pos_buf[i] + 1;
- }
- matchBuf[c] = '\0';
- /* old length matchBuf with quotes symbols */
- *len_with_quotes = j ? j - pos_buf[0] : 0;
+ if (dbg_bmp) printf("final match_buf:'%s'\n", match_buf);
return command_mode;
}
-#undef int_buf
-#undef pos_buf
/*
- * display by column (original idea from ls applet,
- * very optimized by me :)
+ * Display by column (original idea from ls applet,
+ * very optimized by me [Vladimir] :)
*/
static void showfiles(void)
{
/* find the longest file name - use that as the column width */
for (row = 0; row < nrows; row++) {
- l = unicode_strlen(matches[row]);
+ l = unicode_strwidth(matches[row]);
if (column_width < l)
column_width = l;
}
for (nc = 1; nc < ncols && n+nrows < nfiles; n += nrows, nc++) {
printf("%s%-*s", matches[n],
- (int)(column_width - unicode_strlen(matches[n])), ""
+ (int)(column_width - unicode_strwidth(matches[n])), ""
);
}
- puts(matches[n]);
+ if (ENABLE_UNICODE_SUPPORT)
+ puts(printable_string(NULL, matches[n]));
+ else
+ puts(matches[n]);
}
}
-static char *add_quote_for_spec_chars(char *found)
+static const char *is_special_char(char c)
+{
+ return strchr(" `\"#$%^&*()=+{}[]:;'|\\<>", c);
+}
+
+static char *quote_special_chars(char *found)
{
int l = 0;
char *s = xzalloc((strlen(found) + 1) * 2);
while (*found) {
- if (strchr(" `\"#$%^&*()=+{}[]:;'|\\<>", *found))
+ if (is_special_char(*found))
s[l++] = '\\';
s[l++] = *found++;
}
}
/* Do TAB completion */
-static void input_tab(smallint *lastWasTab)
+static NOINLINE void input_tab(smallint *lastWasTab)
{
+ char *chosen_match;
+ char *match_buf;
+ size_t len_found;
+ /* Length of string used for matching */
+ unsigned match_pfx_len = match_pfx_len;
+ int find_type;
+# if ENABLE_UNICODE_SUPPORT
+ /* cursor pos in command converted to multibyte form */
+ int cursor_mb;
+# endif
if (!(state->flags & TAB_COMPLETION))
return;
- if (!*lastWasTab) {
- char *tmp, *tmp1;
- size_t len_found;
-/* char matchBuf[MAX_LINELEN]; */
-#define matchBuf (S.input_tab__matchBuf)
- int find_type;
- int recalc_pos;
-#if ENABLE_UNICODE_SUPPORT
- /* cursor pos in command converted to multibyte form */
- int cursor_mb;
-#endif
+ if (*lastWasTab) {
+ /* The last char was a TAB too.
+ * Print a list of all the available choices.
+ */
+ if (num_matches > 0) {
+ /* cursor will be changed by goto_new_line() */
+ int sav_cursor = cursor;
+ goto_new_line();
+ showfiles();
+ redraw(0, command_len - sav_cursor);
+ }
+ return;
+ }
- *lastWasTab = TRUE; /* flop trigger */
+ *lastWasTab = 1;
+ chosen_match = NULL;
- /* Make a local copy of the string --
- * up to the position of the cursor */
- save_string(matchBuf, cursor + 1);
-#if ENABLE_UNICODE_SUPPORT
- cursor_mb = strlen(matchBuf);
-#endif
- tmp = matchBuf;
+ /* Make a local copy of the string up to the position of the cursor.
+ * build_match_prefix will expand it into int16_t's, need to allocate
+ * twice as much as the string_len+1.
+ * (we then also (ab)use this extra space later - see (**))
+ */
+ match_buf = xmalloc(MAX_LINELEN * sizeof(int16_t));
+# if !ENABLE_UNICODE_SUPPORT
+ save_string(match_buf, cursor + 1); /* +1 for NUL */
+# else
+ {
+ CHAR_T wc = command_ps[cursor];
+ command_ps[cursor] = BB_NUL;
+ save_string(match_buf, MAX_LINELEN);
+ command_ps[cursor] = wc;
+ cursor_mb = strlen(match_buf);
+ }
+# endif
+ find_type = build_match_prefix(match_buf);
- find_type = find_match(matchBuf, &recalc_pos);
+ /* Free up any memory already allocated */
+ free_tab_completion_data();
- /* Free up any memory already allocated */
- free_tab_completion_data();
+# if ENABLE_FEATURE_USERNAME_COMPLETION
+ /* If the word starts with ~ and there is no slash in the word,
+ * then try completing this word as a username. */
+ if (state->flags & USERNAME_COMPLETION)
+ if (match_buf[0] == '~' && strchr(match_buf, '/') == NULL)
+ match_pfx_len = complete_username(match_buf);
+# endif
+ /* If complete_username() did not match,
+ * try to match a command in $PATH, or a directory, or a file */
+ if (!matches)
+ match_pfx_len = complete_cmd_dir_file(match_buf, find_type);
-#if ENABLE_FEATURE_USERNAME_COMPLETION
- /* If the word starts with `~' and there is no slash in the word,
- * then try completing this word as a username. */
- if (state->flags & USERNAME_COMPLETION)
- if (matchBuf[0] == '~' && strchr(matchBuf, '/') == NULL)
- username_tab_completion(matchBuf, NULL);
-#endif
- /* Try to match any executable in our path and everything
- * in the current working directory */
- if (!matches)
- exe_n_cwd_tab_completion(matchBuf, find_type);
- /* Sort, then remove any duplicates found */
- if (matches) {
- unsigned i;
- int n = 0;
- qsort_string_vector(matches, num_matches);
- for (i = 0; i < num_matches - 1; ++i) {
- if (matches[i] && matches[i+1]) { /* paranoia */
- if (strcmp(matches[i], matches[i+1]) == 0) {
- free(matches[i]);
- matches[i] = NULL; /* paranoia */
- } else {
- matches[n++] = matches[i];
- }
+ /* Account for backslashes which will be inserted
+ * by quote_special_chars() later */
+ {
+ const char *e = match_buf + strlen(match_buf);
+ const char *s = e - match_pfx_len;
+ while (s < e)
+ if (is_special_char(*s++))
+ match_pfx_len++;
+ }
+
+ /* Remove duplicates */
+ if (matches) {
+ unsigned i, n = 0;
+ qsort_string_vector(matches, num_matches);
+ for (i = 0; i < num_matches - 1; ++i) {
+ //if (matches[i] && matches[i+1]) { /* paranoia */
+ if (strcmp(matches[i], matches[i+1]) == 0) {
+ free(matches[i]);
+ //matches[i] = NULL; /* paranoia */
+ } else {
+ matches[n++] = matches[i];
}
- }
- matches[n] = matches[i];
- num_matches = n + 1;
+ //}
}
- /* Did we find exactly one match? */
- if (!matches || num_matches > 1) { /* no */
- beep();
- if (!matches)
- return; /* not found */
- /* find minimal match */
- tmp1 = xstrdup(matches[0]);
- for (tmp = tmp1; *tmp; tmp++) {
- for (len_found = 1; len_found < num_matches; len_found++) {
- if (matches[len_found][tmp - tmp1] != *tmp) {
- *tmp = '\0';
- break;
- }
+ matches[n++] = matches[i];
+ num_matches = n;
+ }
+
+ /* Did we find exactly one match? */
+ if (num_matches != 1) { /* no */
+ char *cp;
+ beep();
+ if (!matches)
+ goto ret; /* no matches at all */
+ /* Find common prefix */
+ chosen_match = xstrdup(matches[0]);
+ for (cp = chosen_match; *cp; cp++) {
+ unsigned n;
+ for (n = 1; n < num_matches; n++) {
+ if (matches[n][cp - chosen_match] != *cp) {
+ goto stop;
}
}
- if (*tmp1 == '\0') { /* have unique */
- free(tmp1);
- return;
- }
- tmp = add_quote_for_spec_chars(tmp1);
- free(tmp1);
- } else { /* one match */
- tmp = add_quote_for_spec_chars(matches[0]);
- /* for next completion current found */
- *lastWasTab = FALSE;
-
- len_found = strlen(tmp);
- if (tmp[len_found-1] != '/') {
- tmp[len_found] = ' ';
- tmp[len_found+1] = '\0';
- }
}
+ stop:
+ if (cp == chosen_match) { /* have unique prefix? */
+ goto ret; /* no */
+ }
+ *cp = '\0';
+ cp = quote_special_chars(chosen_match);
+ free(chosen_match);
+ chosen_match = cp;
+ len_found = strlen(chosen_match);
+ } else { /* exactly one match */
+ /* Next <tab> is not a double-tab */
+ *lastWasTab = 0;
+
+ chosen_match = quote_special_chars(matches[0]);
+ len_found = strlen(chosen_match);
+ if (chosen_match[len_found-1] != '/') {
+ chosen_match[len_found] = ' ';
+ chosen_match[++len_found] = '\0';
+ }
+ }
- len_found = strlen(tmp);
-#if !ENABLE_UNICODE_SUPPORT
- /* have space to place the match? */
- /* The result consists of three parts with these lengths: */
- /* (cursor - recalc_pos) + len_found + (command_len - cursor) */
- /* it simplifies into: */
- if ((int)(len_found + command_len - recalc_pos) < S.maxsize) {
+# if !ENABLE_UNICODE_SUPPORT
+ /* Have space to place the match? */
+ /* The result consists of three parts with these lengths: */
+ /* cursor + (len_found - match_pfx_len) + (command_len - cursor) */
+ /* it simplifies into: */
+ if ((int)(len_found - match_pfx_len + command_len) < S.maxsize) {
+ int pos;
+ /* save tail */
+ strcpy(match_buf, &command_ps[cursor]);
+ /* add match and tail */
+ sprintf(&command_ps[cursor], "%s%s", chosen_match + match_pfx_len, match_buf);
+ command_len = strlen(command_ps);
+ /* new pos */
+ pos = cursor + len_found - match_pfx_len;
+ /* write out the matched command */
+ redraw(cmdedit_y, command_len - pos);
+ }
+# else
+ {
+ /* Use 2nd half of match_buf as scratch space - see (**) */
+ char *command = match_buf + MAX_LINELEN;
+ int len = save_string(command, MAX_LINELEN);
+ /* Have space to place the match? */
+ /* cursor_mb + (len_found - match_pfx_len) + (len - cursor_mb) */
+ if ((int)(len_found - match_pfx_len + len) < MAX_LINELEN) {
+ int pos;
/* save tail */
- strcpy(matchBuf, command_ps + cursor);
+ strcpy(match_buf, &command[cursor_mb]);
+ /* where do we want to have cursor after all? */
+ strcpy(&command[cursor_mb], chosen_match + match_pfx_len);
+ len = load_string(command);
/* add match and tail */
- sprintf(&command_ps[cursor - recalc_pos], "%s%s", tmp, matchBuf);
- command_len = strlen(command_ps);
- /* new pos */
- recalc_pos = cursor - recalc_pos + len_found;
+ sprintf(&command[cursor_mb], "%s%s", chosen_match + match_pfx_len, match_buf);
+ command_len = load_string(command);
/* write out the matched command */
- redraw(cmdedit_y, command_len - recalc_pos);
- }
-#else
- {
- char command[MAX_LINELEN];
- int len = save_string(command, sizeof(command));
- /* have space to place the match? */
- /* (cursor_mb - recalc_pos) + len_found + (len - cursor_mb) */
- if ((int)(len_found + len - recalc_pos) < MAX_LINELEN) {
- /* save tail */
- strcpy(matchBuf, command + cursor_mb);
- /* where do we want to have cursor after all? */
- strcpy(&command[cursor_mb - recalc_pos], tmp);
- len = load_string(command, S.maxsize);
- /* add match and tail */
- sprintf(&command[cursor_mb - recalc_pos], "%s%s", tmp, matchBuf);
- command_len = load_string(command, S.maxsize);
- /* write out the matched command */
- redraw(cmdedit_y, command_len - len);
- }
- }
-#endif
- free(tmp);
-#undef matchBuf
- } else {
- /* Ok -- the last char was a TAB. Since they
- * just hit TAB again, print a list of all the
- * available choices... */
- if (matches && num_matches > 0) {
- /* changed by goto_new_line() */
- int sav_cursor = cursor;
-
- /* Go to the next line */
- goto_new_line();
- showfiles();
- redraw(0, command_len - sav_cursor);
+ /* paranoia: load_string can return 0 on conv error,
+ * prevent passing pos = (0 - 12) to redraw */
+ pos = command_len - len;
+ redraw(cmdedit_y, pos >= 0 ? pos : 0);
}
}
+# endif
+ ret:
+ free(chosen_match);
+ free(match_buf);
}
-#endif /* FEATURE_COMMAND_TAB_COMPLETION */
+#endif /* FEATURE_TAB_COMPLETION */
line_input_t* FAST_FUNC new_line_input_t(int flags)
{
line_input_t *n = xzalloc(sizeof(*n));
n->flags = flags;
+ n->max_history = MAX_HISTORY;
return n;
}
#if MAX_HISTORY > 0
+unsigned FAST_FUNC size_from_HISTFILESIZE(const char *hp)
+{
+ int size = MAX_HISTORY;
+ if (hp) {
+ size = atoi(hp);
+ if (size <= 0)
+ return 1;
+ if (size > MAX_HISTORY)
+ return MAX_HISTORY;
+ }
+ return size;
+}
+
static void save_command_ps_at_cur_history(void)
{
if (command_ps[0] != BB_NUL) {
return 0;
}
+/* Lists command history. Used by shell 'history' builtins */
+void FAST_FUNC show_history(const line_input_t *st)
+{
+ int i;
+
+ if (!st)
+ return;
+ for (i = 0; i < st->cnt_history; i++)
+ printf("%4d %s\n", i, st->history[i]);
+}
+
# if ENABLE_FEATURE_EDITING_SAVEHISTORY
/* We try to ensure that concurrent additions to the history
* do not overwrite each other.
/* fill temp_h[], retaining only last MAX_HISTORY lines */
memset(temp_h, 0, sizeof(temp_h));
- st_parm->cnt_history_in_file = idx = 0;
+ idx = 0;
+ st_parm->cnt_history_in_file = 0;
while ((line = xmalloc_fgetline(fp)) != NULL) {
if (line[0] == '\0') {
free(line);
temp_h[idx] = line;
st_parm->cnt_history_in_file++;
idx++;
- if (idx == MAX_HISTORY)
+ if (idx == st_parm->max_history)
idx = 0;
}
fclose(fp);
if (st_parm->cnt_history_in_file) {
while (temp_h[idx] == NULL) {
idx++;
- if (idx == MAX_HISTORY)
+ if (idx == st_parm->max_history)
idx = 0;
}
}
/* copy temp_h[] to st_parm->history[] */
- for (i = 0; i < MAX_HISTORY;) {
+ for (i = 0; i < st_parm->max_history;) {
line = temp_h[idx];
if (!line)
break;
idx++;
- if (idx == MAX_HISTORY)
+ if (idx == st_parm->max_history)
idx = 0;
line_len = strlen(line);
if (line_len >= MAX_LINELEN)
st_parm->history[i++] = line;
}
st_parm->cnt_history = i;
+ if (ENABLE_FEATURE_EDITING_SAVE_ON_EXIT)
+ st_parm->cnt_history_in_file = i;
}
}
-/* state->flags is already checked to be nonzero */
+# if ENABLE_FEATURE_EDITING_SAVE_ON_EXIT
+void save_history(line_input_t *st)
+{
+ FILE *fp;
+
+ if (!st->hist_file)
+ return;
+ if (st->cnt_history <= st->cnt_history_in_file)
+ return;
+
+ fp = fopen(st->hist_file, "a");
+ if (fp) {
+ int i, fd;
+ char *new_name;
+ line_input_t *st_temp;
+
+ for (i = st->cnt_history_in_file; i < st->cnt_history; i++)
+ fprintf(fp, "%s\n", st->history[i]);
+ fclose(fp);
+
+ /* we may have concurrently written entries from others.
+ * load them */
+ st_temp = new_line_input_t(st->flags);
+ st_temp->hist_file = st->hist_file;
+ st_temp->max_history = st->max_history;
+ load_history(st_temp);
+
+ /* write out temp file and replace hist_file atomically */
+ new_name = xasprintf("%s.%u.new", st->hist_file, (int) getpid());
+ fd = open(new_name, O_WRONLY | O_CREAT | O_TRUNC, 0600);
+ if (fd >= 0) {
+ fp = xfdopen_for_write(fd);
+ for (i = 0; i < st_temp->cnt_history; i++)
+ fprintf(fp, "%s\n", st_temp->history[i]);
+ fclose(fp);
+ if (rename(new_name, st->hist_file) == 0)
+ st->cnt_history_in_file = st_temp->cnt_history;
+ }
+ free(new_name);
+ free_line_input_t(st_temp);
+ }
+}
+# else
static void save_history(char *str)
{
int fd;
int len, len2;
- fd = open(state->hist_file, O_WRONLY | O_CREAT | O_APPEND, 0666);
+ if (!state->hist_file)
+ return;
+
+ fd = open(state->hist_file, O_WRONLY | O_CREAT | O_APPEND, 0600);
if (fd < 0)
return;
xlseek(fd, 0, SEEK_END); /* paranoia */
/* did we write so much that history file needs trimming? */
state->cnt_history_in_file++;
- if (state->cnt_history_in_file > MAX_HISTORY * 4) {
- FILE *fp;
+ if (state->cnt_history_in_file > state->max_history * 4) {
char *new_name;
line_input_t *st_temp;
- int i;
/* we may have concurrently written entries from others.
* load them */
st_temp = new_line_input_t(state->flags);
st_temp->hist_file = state->hist_file;
+ st_temp->max_history = state->max_history;
load_history(st_temp);
/* write out temp file and replace hist_file atomically */
new_name = xasprintf("%s.%u.new", state->hist_file, (int) getpid());
- fp = fopen_for_write(new_name);
- if (fp) {
+ fd = open(new_name, O_WRONLY | O_CREAT | O_TRUNC, 0600);
+ if (fd >= 0) {
+ FILE *fp;
+ int i;
+
+ fp = xfdopen_for_write(fd);
for (i = 0; i < st_temp->cnt_history; i++)
fprintf(fp, "%s\n", st_temp->history[i]);
fclose(fp);
free_line_input_t(st_temp);
}
}
+# endif
# else
# define load_history(a) ((void)0)
# define save_history(a) ((void)0)
if (i && strcmp(state->history[i-1], str) == 0)
return;
- free(state->history[MAX_HISTORY]); /* redundant, paranoia */
- state->history[MAX_HISTORY] = NULL; /* redundant, paranoia */
+ free(state->history[state->max_history]); /* redundant, paranoia */
+ state->history[state->max_history] = NULL; /* redundant, paranoia */
/* If history[] is full, remove the oldest command */
- /* we need to keep history[MAX_HISTORY] empty, hence >=, not > */
- if (i >= MAX_HISTORY) {
+ /* we need to keep history[state->max_history] empty, hence >=, not > */
+ if (i >= state->max_history) {
free(state->history[0]);
- for (i = 0; i < MAX_HISTORY-1; i++)
+ for (i = 0; i < state->max_history-1; i++)
state->history[i] = state->history[i+1];
- /* i == MAX_HISTORY-1 */
+ /* i == state->max_history-1 */
+# if ENABLE_FEATURE_EDITING_SAVE_ON_EXIT
+ if (state->cnt_history_in_file)
+ state->cnt_history_in_file--;
+# endif
}
- /* i <= MAX_HISTORY-1 */
+ /* i <= state->max_history-1 */
state->history[i++] = xstrdup(str);
- /* i <= MAX_HISTORY */
+ /* i <= state->max_history */
state->cur_history = i;
state->cnt_history = i;
-# if MAX_HISTORY > 0 && ENABLE_FEATURE_EDITING_SAVEHISTORY
- if ((state->flags & SAVE_HISTORY) && state->hist_file)
- save_history(str);
+# if ENABLE_FEATURE_EDITING_SAVEHISTORY && !ENABLE_FEATURE_EDITING_SAVE_ON_EXIT
+ save_history(str);
# endif
- IF_FEATURE_EDITING_FANCY_PROMPT(num_ok_lines++;)
}
#else /* MAX_HISTORY == 0 */
* write(1, "~/srcdevel/bbox/fix/busybox.t4 # ", 33) = 33
* poll([{fd=0, events=POLLIN}], 1, 0) = 0 (Timeout) <-- no input exists
* write(1, "\33[6n", 4) = 4 <-- send the ESC sequence, quick!
- * poll([{fd=0, events=POLLIN}], 1, 4294967295) = 1 ([{fd=0, revents=POLLIN}])
+ * poll([{fd=0, events=POLLIN}], 1, -1) = 1 ([{fd=0, revents=POLLIN}])
* read(0, "\n", 1) = 1 <-- oh crap, user's input got in first
*/
struct pollfd pfd;
pfd.events = POLLIN;
if (safe_poll(&pfd, 1, 0) == 0) {
S.sent_ESC_br6n = 1;
- out1str("\033" "[6n");
+ fputs(ESC"[6n", stdout);
fflush_all(); /* make terminal see it ASAP! */
}
}
#define ask_terminal() ((void)0)
#endif
+/* Called just once at read_line_input() init time */
#if !ENABLE_FEATURE_EDITING_FANCY_PROMPT
static void parse_and_put_prompt(const char *prmt_ptr)
{
+ const char *p;
cmdedit_prompt = prmt_ptr;
- cmdedit_prmt_len = strlen(prmt_ptr);
+ p = strrchr(prmt_ptr, '\n');
+ cmdedit_prmt_len = unicode_strwidth(p ? p+1 : prmt_ptr);
put_prompt();
}
#else
static void parse_and_put_prompt(const char *prmt_ptr)
{
- int prmt_len = 0;
- size_t cur_prmt_len = 0;
- char flg_not_length = '[';
+ int prmt_size = 0;
char *prmt_mem_ptr = xzalloc(1);
- char *cwd_buf = xrealloc_getcwd_or_warn(NULL);
+# if ENABLE_USERNAME_OR_HOMEDIR
+ char *cwd_buf = NULL;
+# endif
+ char flg_not_length = '[';
char cbuf[2];
- char c;
- char *pbuf;
- cmdedit_prmt_len = 0;
-
- if (!cwd_buf) {
- cwd_buf = (char *)bb_msg_unknown;
- }
+ /*cmdedit_prmt_len = 0; - already is */
cbuf[1] = '\0'; /* never changes */
while (*prmt_ptr) {
+ char timebuf[sizeof("HH:MM:SS")];
char *free_me = NULL;
+ char *pbuf;
+ char c;
pbuf = cbuf;
c = *prmt_ptr++;
if (c == '\\') {
- const char *cp = prmt_ptr;
+ const char *cp;
int l;
-
- c = bb_process_escape_sequence(&prmt_ptr);
+/*
+ * Supported via bb_process_escape_sequence:
+ * \a ASCII bell character (07)
+ * \e ASCII escape character (033)
+ * \n newline
+ * \r carriage return
+ * \\ backslash
+ * \nnn char with octal code nnn
+ * Supported:
+ * \$ if the effective UID is 0, a #, otherwise a $
+ * \w current working directory, with $HOME abbreviated with a tilde
+ * Note: we do not support $PROMPT_DIRTRIM=n feature
+ * \W basename of the current working directory, with $HOME abbreviated with a tilde
+ * \h hostname up to the first '.'
+ * \H hostname
+ * \u username
+ * \[ begin a sequence of non-printing characters
+ * \] end a sequence of non-printing characters
+ * \T current time in 12-hour HH:MM:SS format
+ * \@ current time in 12-hour am/pm format
+ * \A current time in 24-hour HH:MM format
+ * \t current time in 24-hour HH:MM:SS format
+ * (all of the above work as \A)
+ * Not supported:
+ * \! history number of this command
+ * \# command number of this command
+ * \j number of jobs currently managed by the shell
+ * \l basename of the shell's terminal device name
+ * \s name of the shell, the basename of $0 (the portion following the final slash)
+ * \V release of bash, version + patch level (e.g., 2.00.0)
+ * \d date in "Weekday Month Date" format (e.g., "Tue May 26")
+ * \D{format}
+ * format is passed to strftime(3).
+ * An empty format results in a locale-specific time representation.
+ * The braces are required.
+ * Mishandled by bb_process_escape_sequence:
+ * \v version of bash (e.g., 2.00)
+ */
+ cp = prmt_ptr;
+ c = *cp;
+ if (c != 't') /* don't treat \t as tab */
+ c = bb_process_escape_sequence(&prmt_ptr);
if (prmt_ptr == cp) {
if (*cp == '\0')
break;
c = *prmt_ptr++;
switch (c) {
-# if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
+# if ENABLE_USERNAME_OR_HOMEDIR
case 'u':
pbuf = user_buf ? user_buf : (char*)"";
break;
# endif
+ case 'H':
case 'h':
pbuf = free_me = safe_gethostname();
- *strchrnul(pbuf, '.') = '\0';
+ if (c == 'h')
+ strchrnul(pbuf, '.')[0] = '\0';
break;
case '$':
c = (geteuid() == 0 ? '#' : '$');
break;
-# if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
- case 'w':
- /* /home/user[/something] -> ~[/something] */
- pbuf = cwd_buf;
- l = strlen(home_pwd_buf);
- if (l != 0
- && strncmp(home_pwd_buf, cwd_buf, l) == 0
- && (cwd_buf[l]=='/' || cwd_buf[l]=='\0')
- && strlen(cwd_buf + l) < PATH_MAX
- ) {
- pbuf = free_me = xasprintf("~%s", cwd_buf + l);
- }
+ case 'T': /* 12-hour HH:MM:SS format */
+ case '@': /* 12-hour am/pm format */
+ case 'A': /* 24-hour HH:MM format */
+ case 't': /* 24-hour HH:MM:SS format */
+ /* We show all of them as 24-hour HH:MM */
+ strftime_HHMMSS(timebuf, sizeof(timebuf), NULL)[-3] = '\0';
+ pbuf = timebuf;
break;
-# endif
- case 'W':
+# if ENABLE_USERNAME_OR_HOMEDIR
+ case 'w': /* current dir */
+ case 'W': /* basename of cur dir */
+ if (!cwd_buf) {
+ cwd_buf = xrealloc_getcwd_or_warn(NULL);
+ if (!cwd_buf)
+ cwd_buf = (char *)bb_msg_unknown;
+ else {
+ /* /home/user[/something] -> ~[/something] */
+ l = strlen(home_pwd_buf);
+ if (l != 0
+ && strncmp(home_pwd_buf, cwd_buf, l) == 0
+ && (cwd_buf[l] == '/' || cwd_buf[l] == '\0')
+ ) {
+ cwd_buf[0] = '~';
+ overlapping_strcpy(cwd_buf + 1, cwd_buf + l);
+ }
+ }
+ }
pbuf = cwd_buf;
+ if (c == 'w')
+ break;
cp = strrchr(pbuf, '/');
- if (cp != NULL && cp != pbuf)
- pbuf += (cp-pbuf) + 1;
- break;
- case '!':
- pbuf = free_me = xasprintf("%d", num_ok_lines);
- break;
- case 'e': case 'E': /* \e \E = \033 */
- c = '\033';
+ if (cp)
+ pbuf = (char*)cp + 1;
break;
+# endif
+// bb_process_escape_sequence does this now:
+// case 'e': case 'E': /* \e \E = \033 */
+// c = '\033';
+// break;
case 'x': case 'X': {
char buf2[4];
for (l = 0; l < 3;) {
}
case '[': case ']':
if (c == flg_not_length) {
- flg_not_length = (flg_not_length == '[' ? ']' : '[');
+ /* Toggle '['/']' hex 5b/5d */
+ flg_not_length ^= 6;
continue;
}
break;
} /* if */
} /* if */
cbuf[0] = c;
- cur_prmt_len = strlen(pbuf);
- prmt_len += cur_prmt_len;
- if (flg_not_length != ']')
- cmdedit_prmt_len += cur_prmt_len;
- prmt_mem_ptr = strcat(xrealloc(prmt_mem_ptr, prmt_len+1), pbuf);
+ {
+ int n = strlen(pbuf);
+ prmt_size += n;
+ if (c == '\n')
+ cmdedit_prmt_len = 0;
+ else if (flg_not_length != ']') {
+#if 0 /*ENABLE_UNICODE_SUPPORT*/
+/* Won't work, pbuf is one BYTE string here instead of an one Unicode char string. */
+/* FIXME */
+ cmdedit_prmt_len += unicode_strwidth(pbuf);
+#else
+ cmdedit_prmt_len += n;
+#endif
+ }
+ }
+ prmt_mem_ptr = strcat(xrealloc(prmt_mem_ptr, prmt_size+1), pbuf);
free(free_me);
} /* while */
+# if ENABLE_USERNAME_OR_HOMEDIR
if (cwd_buf != (char *)bb_msg_unknown)
free(cwd_buf);
+# endif
cmdedit_prompt = prmt_mem_ptr;
put_prompt();
}
static void win_changed(int nsig)
{
+ int sv_errno = errno;
unsigned width;
+
get_terminal_width_height(0, &width, NULL);
- cmdedit_setwidth(width, nsig /* - just a yes/no flag */);
- if (nsig == SIGWINCH)
- signal(SIGWINCH, win_changed); /* rearm ourself */
+//FIXME: cmdedit_setwidth() -> redraw() -> printf() -> KABOOM! (we are in signal handler!)
+ cmdedit_setwidth(width, /*redraw_flg:*/ nsig);
+
+ errno = sv_errno;
}
-static int lineedit_read_key(char *read_key_buffer)
+static int lineedit_read_key(char *read_key_buffer, int timeout)
{
int64_t ic;
- int timeout = -1;
#if ENABLE_UNICODE_SUPPORT
char unicode_buf[MB_CUR_MAX + 1];
int unicode_idx = 0;
S.sent_ESC_br6n = 0;
if (cursor == 0) { /* otherwise it may be bogus */
int col = ((ic >> 32) & 0x7fff) - 1;
- if (col > cmdedit_prmt_len) {
+ /*
+ * Is col > cmdedit_prmt_len?
+ * If yes (terminal says cursor is farther to the right
+ * of where we think it should be),
+ * the prompt wasn't printed starting at col 1,
+ * there was additional text before it.
+ */
+ if ((int)(col - cmdedit_prmt_len) > 0) {
+ /* Fix our understanding of current x position */
cmdedit_x += (col - cmdedit_prmt_len);
while (cmdedit_x >= cmdedit_termw) {
cmdedit_x -= cmdedit_termw;
#undef CTRL
#define CTRL(a) ((a) & ~0x40)
+enum {
+ VI_CMDMODE_BIT = 0x40000000,
+ /* 0x80000000 bit flags KEYCODE_xxx */
+};
+
+#if ENABLE_FEATURE_REVERSE_SEARCH
+/* Mimic readline Ctrl-R reverse history search.
+ * When invoked, it shows the following prompt:
+ * (reverse-i-search)'': user_input [cursor pos unchanged by Ctrl-R]
+ * and typing results in search being performed:
+ * (reverse-i-search)'tmp': cd /tmp [cursor under t in /tmp]
+ * Search is performed by looking at progressively older lines in history.
+ * Ctrl-R again searches for the next match in history.
+ * Backspace deletes last matched char.
+ * Control keys exit search and return to normal editing (at current history line).
+ */
+static int32_t reverse_i_search(void)
+{
+ char match_buf[128]; /* for user input */
+ char read_key_buffer[KEYCODE_BUFFER_SIZE];
+ const char *matched_history_line;
+ const char *saved_prompt;
+ unsigned saved_prmt_len;
+ int32_t ic;
+
+ matched_history_line = NULL;
+ read_key_buffer[0] = 0;
+ match_buf[0] = '\0';
+
+ /* Save and replace the prompt */
+ saved_prompt = cmdedit_prompt;
+ saved_prmt_len = cmdedit_prmt_len;
+ goto set_prompt;
+
+ while (1) {
+ int h;
+ unsigned match_buf_len = strlen(match_buf);
+
+ fflush_all();
+//FIXME: correct timeout?
+ ic = lineedit_read_key(read_key_buffer, -1);
+
+ switch (ic) {
+ case CTRL('R'): /* searching for the next match */
+ break;
+
+ case '\b':
+ case '\x7f':
+ /* Backspace */
+ if (unicode_status == UNICODE_ON) {
+ while (match_buf_len != 0) {
+ uint8_t c = match_buf[--match_buf_len];
+ if ((c & 0xc0) != 0x80) /* start of UTF-8 char? */
+ break; /* yes */
+ }
+ } else {
+ if (match_buf_len != 0)
+ match_buf_len--;
+ }
+ match_buf[match_buf_len] = '\0';
+ break;
+
+ default:
+ if (ic < ' '
+ || (!ENABLE_UNICODE_SUPPORT && ic >= 256)
+ || (ENABLE_UNICODE_SUPPORT && ic >= VI_CMDMODE_BIT)
+ ) {
+ goto ret;
+ }
+
+ /* Append this char */
+#if ENABLE_UNICODE_SUPPORT
+ if (unicode_status == UNICODE_ON) {
+ mbstate_t mbstate = { 0 };
+ char buf[MB_CUR_MAX + 1];
+ int len = wcrtomb(buf, ic, &mbstate);
+ if (len > 0) {
+ buf[len] = '\0';
+ if (match_buf_len + len < sizeof(match_buf))
+ strcpy(match_buf + match_buf_len, buf);
+ }
+ } else
+#endif
+ if (match_buf_len < sizeof(match_buf) - 1) {
+ match_buf[match_buf_len] = ic;
+ match_buf[match_buf_len + 1] = '\0';
+ }
+ break;
+ } /* switch (ic) */
+
+ /* Search in history for match_buf */
+ h = state->cur_history;
+ if (ic == CTRL('R'))
+ h--;
+ while (h >= 0) {
+ if (state->history[h]) {
+ char *match = strstr(state->history[h], match_buf);
+ if (match) {
+ state->cur_history = h;
+ matched_history_line = state->history[h];
+ command_len = load_string(matched_history_line);
+ cursor = match - matched_history_line;
+//FIXME: cursor position for Unicode case
+
+ free((char*)cmdedit_prompt);
+ set_prompt:
+ cmdedit_prompt = xasprintf("(reverse-i-search)'%s': ", match_buf);
+ cmdedit_prmt_len = unicode_strwidth(cmdedit_prompt);
+ goto do_redraw;
+ }
+ }
+ h--;
+ }
+
+ /* Not found */
+ match_buf[match_buf_len] = '\0';
+ beep();
+ continue;
+
+ do_redraw:
+ redraw(cmdedit_y, command_len - cursor);
+ } /* while (1) */
+
+ ret:
+ if (matched_history_line)
+ command_len = load_string(matched_history_line);
+
+ free((char*)cmdedit_prompt);
+ cmdedit_prompt = saved_prompt;
+ cmdedit_prmt_len = saved_prmt_len;
+ redraw(cmdedit_y, command_len - cursor);
+
+ return ic;
+}
+#endif
+
/* maxsize must be >= 2.
* Returns:
* -1 on read errors or EOF, or on bare Ctrl-D,
* 0 on ctrl-C (the line entered is still returned in 'command'),
* >0 length of input string, including terminating '\n'
*/
-int FAST_FUNC read_line_input(const char *prompt, char *command, int maxsize, line_input_t *st)
+int FAST_FUNC read_line_input(line_input_t *st, const char *prompt, char *command, int maxsize, int timeout)
{
int len;
#if ENABLE_FEATURE_TAB_COMPLETION
- smallint lastWasTab = FALSE;
+ smallint lastWasTab = 0;
#endif
smallint break_out = 0;
#if ENABLE_FEATURE_EDITING_VI
maxsize = MAX_LINELEN;
S.maxsize = maxsize;
- /* With null flags, no other fields are ever used */
+ /* With zero flags, no other fields are ever used */
state = st ? st : (line_input_t*) &const_int_0;
#if MAX_HISTORY > 0
# if ENABLE_FEATURE_EDITING_SAVEHISTORY
- if ((state->flags & SAVE_HISTORY) && state->hist_file)
+ if (state->hist_file)
if (state->cnt_history == 0)
load_history(state);
# endif
#define command command_must_not_be_used
new_settings = initial_settings;
- new_settings.c_lflag &= ~ICANON; /* unbuffered input */
- /* Turn off echoing and CTRL-C, so we can trap it */
- new_settings.c_lflag &= ~(ECHO | ECHONL | ISIG);
- /* Hmm, in linux c_cc[] is not parsed if ICANON is off */
+ /* ~ICANON: unbuffered input (most c_cc[] are disabled, VMIN/VTIME are enabled) */
+ /* ~ECHO, ~ECHONL: turn off echoing, including newline echoing */
+ /* ~ISIG: turn off INTR (ctrl-C), QUIT, SUSP */
+ new_settings.c_lflag &= ~(ICANON | ECHO | ECHONL | ISIG);
+ /* reads would block only if < 1 char is available */
new_settings.c_cc[VMIN] = 1;
+ /* no timeout (reads block forever) */
new_settings.c_cc[VTIME] = 0;
- /* Turn off CTRL-C, so we can trap it */
-#ifndef _POSIX_VDISABLE
-# define _POSIX_VDISABLE '\0'
-#endif
- new_settings.c_cc[VINTR] = _POSIX_VDISABLE;
+ /* Should be not needed if ISIG is off: */
+ /* Turn off CTRL-C */
+ /* new_settings.c_cc[VINTR] = _POSIX_VDISABLE; */
tcsetattr_stdin_TCSANOW(&new_settings);
- /* Now initialize things */
- previous_SIGWINCH_handler = signal(SIGWINCH, win_changed);
- win_changed(0); /* do initial resizing */
-#if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
+#if ENABLE_USERNAME_OR_HOMEDIR
{
struct passwd *entry;
#endif
#if 0
- for (i = 0; i <= MAX_HISTORY; i++)
+ for (i = 0; i <= state->max_history; i++)
bb_error_msg("history[%d]:'%s'", i, state->history[i]);
bb_error_msg("cur_history:%d cnt_history:%d", state->cur_history, state->cnt_history);
#endif
parse_and_put_prompt(prompt);
ask_terminal();
+ /* Install window resize handler (NB: after *all* init is complete) */
+//FIXME: save entire sigaction!
+ previous_SIGWINCH_handler = signal(SIGWINCH, win_changed);
+ win_changed(0); /* get initial window size */
+
read_key_buffer[0] = 0;
while (1) {
/*
* clutters the big switch a bit, but keeps all the code
* in one place.
*/
- enum {
- VI_CMDMODE_BIT = 0x40000000,
- /* 0x80000000 bit flags KEYCODE_xxx */
- };
int32_t ic, ic_raw;
fflush_all();
- ic = ic_raw = lineedit_read_key(read_key_buffer);
+ ic = ic_raw = lineedit_read_key(read_key_buffer, timeout);
+#if ENABLE_FEATURE_REVERSE_SEARCH
+ again:
+#endif
#if ENABLE_FEATURE_EDITING_VI
newdelflag = 1;
if (vi_cmdmode) {
case CTRL('L'):
vi_case(CTRL('L')|VI_CMDMODE_BIT:)
/* Control-l -- clear screen */
- printf("\033[H"); /* cursor to top,left */
+ printf(ESC"[H"); /* cursor to top,left */
redraw(0, command_len - cursor);
break;
#if MAX_HISTORY > 0
while (cursor > 0 && !BB_isspace(command_ps[cursor-1]))
input_backspace();
break;
+#if ENABLE_FEATURE_REVERSE_SEARCH
+ case CTRL('R'):
+ ic = ic_raw = reverse_i_search();
+ goto again;
+#endif
#if ENABLE_FEATURE_EDITING_VI
case 'i'|VI_CMDMODE_BIT:
case 'd'|VI_CMDMODE_BIT: {
int nc, sc;
- ic = lineedit_read_key(read_key_buffer);
+ ic = lineedit_read_key(read_key_buffer, timeout);
if (errno) /* error */
- goto prepare_to_die;
+ goto return_error_indicator;
if (ic == ic_raw) { /* "cc", "dd" */
input_backward(cursor);
goto clear_to_eol;
break;
case 'r'|VI_CMDMODE_BIT:
//FIXME: unicode case?
- ic = lineedit_read_key(read_key_buffer);
+ ic = lineedit_read_key(read_key_buffer, timeout);
if (errno) /* error */
- goto prepare_to_die;
+ goto return_error_indicator;
if (ic < ' ' || ic > 255) {
beep();
} else {
vi_cmdmode = 1;
input_backward(1);
}
+ /* Handle a few ESC-<key> combinations the same way
+ * standard readline bindings (IOW: bash) do.
+ * Often, Alt-<key> generates ESC-<key>.
+ */
+ ic = lineedit_read_key(read_key_buffer, timeout);
+ switch (ic) {
+ //case KEYCODE_LEFT: - bash doesn't do this
+ case 'b':
+ ctrl_left();
+ break;
+ //case KEYCODE_RIGHT: - bash doesn't do this
+ case 'f':
+ ctrl_right();
+ break;
+ //case KEYCODE_DELETE: - bash doesn't do this
+ case 'd': /* Alt-D */
+ {
+ /* Delete word forward */
+ int nc, sc = cursor;
+ ctrl_right();
+ nc = cursor - sc;
+ input_backward(nc);
+ while (--nc >= 0)
+ input_delete(1);
+ break;
+ }
+ case '\b': /* Alt-Backspace(?) */
+ case '\x7f': /* Alt-Backspace(?) */
+ //case 'w': - bash doesn't do this
+ {
+ /* Delete word backward */
+ int sc = cursor;
+ ctrl_left();
+ while (sc-- > cursor)
+ input_delete(1);
+ break;
+ }
+ }
break;
#endif /* FEATURE_COMMAND_EDITING_VI */
/* Rewrite the line with the selected history item */
/* change command */
command_len = load_string(state->history[state->cur_history] ?
- state->history[state->cur_history] : "", maxsize);
+ state->history[state->cur_history] : "");
/* redraw and go to eol (bol, in vi) */
redraw(cmdedit_y, (state->flags & VI_MODE) ? 9999 : 0);
break;
input_backward(1);
break;
case KEYCODE_CTRL_LEFT:
+ case KEYCODE_ALT_LEFT: /* bash doesn't do it */
ctrl_left();
break;
case KEYCODE_CTRL_RIGHT:
+ case KEYCODE_ALT_RIGHT: /* bash doesn't do it */
ctrl_right();
break;
case KEYCODE_HOME:
* or exit if len=0 and no chars to delete */
if (command_len == 0) {
errno = 0;
-#if ENABLE_FEATURE_EDITING_VI
- prepare_to_die:
-#endif
+
+ case -1: /* error (e.g. EIO when tty is destroyed) */
+ IF_FEATURE_EDITING_VI(return_error_indicator:)
break_out = command_len = -1;
break;
}
// /* Control-V -- force insert of next char */
// if (c == CTRL('V')) {
// if (safe_read(STDIN_FILENO, &c, 1) < 1)
-// goto prepare_to_die;
+// goto return_error_indicator;
// if (c == 0) {
// beep();
// break;
#if ENABLE_FEATURE_TAB_COMPLETION
if (ic_raw != '\t')
- lastWasTab = FALSE;
+ lastWasTab = 0;
#endif
} /* while (1) */
}
#endif
-/* Stop bug catching using "command_must_not_be_used" trick */
+/* End of bug-catching "command_must_not_be_used" trick */
#undef command
#if ENABLE_UNICODE_SUPPORT
free(command_ps);
#endif
- if (command_len > 0)
+ if (command_len > 0) {
remember_in_history(command);
+ }
if (break_out > 0) {
command[command_len++] = '\n';
return len; /* can't return command_len, DEINIT_S() destroys it */
}
-#else
+#else /* !FEATURE_EDITING */
#undef read_line_input
int FAST_FUNC read_line_input(const char* prompt, char* command, int maxsize)
{
fputs(prompt, stdout);
fflush_all();
- fgets(command, maxsize, stdin);
+ if (!fgets(command, maxsize, stdin))
+ return -1;
return strlen(command);
}
-#endif /* FEATURE_EDITING */
+#endif /* !FEATURE_EDITING */
/*
l = read_line_input(prompt, buff);
if (l <= 0 || buff[l-1] != '\n')
break;
- buff[l-1] = 0;
+ buff[l-1] = '\0';
printf("*** read_line_input() returned line =%s=\n", buff);
}
printf("*** read_line_input() detect ^D\n");