return (x >> n) | (x << (64 - n));
}
+/* rotl64 only used for sha3 currently */
+static ALWAYS_INLINE uint64_t rotl64(uint64_t x, unsigned n)
+{
+ return (x << n) | (x >> (64 - n));
+}
+
+/* Feed data through a temporary buffer.
+ * The internal buffer remembers previous data until it has 64
+ * bytes worth to pass on.
+ */
+static void FAST_FUNC common64_hash(md5_ctx_t *ctx, const void *buffer, size_t len)
+{
+ unsigned bufpos = ctx->total64 & 63;
-typedef struct common64_ctx_t {
- char wbuffer[64]; /* NB: always correctly aligned for uint64_t */
- uint64_t total64;
-} common64_ctx_t;
+ ctx->total64 += len;
-typedef void FAST_FUNC process_block64_func(void*);
+ while (1) {
+ unsigned remaining = 64 - bufpos;
+ if (remaining > len)
+ remaining = len;
+ /* Copy data into aligned buffer */
+ memcpy(ctx->wbuffer + bufpos, buffer, remaining);
+ len -= remaining;
+ buffer = (const char *)buffer + remaining;
+ bufpos += remaining;
+ /* Clever way to do "if (bufpos != N) break; ... ; bufpos = 0;" */
+ bufpos -= 64;
+ if (bufpos != 0)
+ break;
+ /* Buffer is filled up, process it */
+ ctx->process_block(ctx);
+ /*bufpos = 0; - already is */
+ }
+}
-static void FAST_FUNC common64_end(void *vctx, process_block64_func process_block64, int swap_needed)
+/* Process the remaining bytes in the buffer */
+static void FAST_FUNC common64_end(md5_ctx_t *ctx, int swap_needed)
{
- common64_ctx_t *ctx = vctx;
unsigned bufpos = ctx->total64 & 63;
/* Pad the buffer to the next 64-byte boundary with 0x80,0,0,0... */
ctx->wbuffer[bufpos++] = 0x80;
/* wbuffer is suitably aligned for this */
*(uint64_t *) (&ctx->wbuffer[64 - 8]) = t;
}
- process_block64(ctx);
+ ctx->process_block(ctx);
if (remaining >= 8)
break;
bufpos = 0;
/*
- * Based on shasum from http://www.netsw.org/crypto/hash/
- * Majorly hacked up to use Dr Brian Gladman's sha1 code
+ * Compute MD5 checksum of strings according to the
+ * definition of MD5 in RFC 1321 from April 1992.
+ *
+ * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
*
- * Copyright (C) 2002 Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
+ * Copyright (C) 1995-1999 Free Software Foundation, Inc.
+ * Copyright (C) 2001 Manuel Novoa III
* Copyright (C) 2003 Glenn L. McGrath
* Copyright (C) 2003 Erik Andersen
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
- *
- * ---------------------------------------------------------------------------
- * Issue Date: 10/11/2002
- *
- * This is a byte oriented version of SHA1 that operates on arrays of bytes
- * stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
- *
- * ---------------------------------------------------------------------------
- *
- * SHA256 and SHA512 parts are:
- * Released into the Public Domain by Ulrich Drepper <drepper@redhat.com>.
- * Shrank by Denys Vlasenko.
- *
- * ---------------------------------------------------------------------------
- *
- * The best way to test random blocksizes is to go to coreutils/md5_sha1_sum.c
- * and replace "4096" with something like "2000 + time(NULL) % 2097",
- * then rebuild and compare "shaNNNsum bigfile" results.
*/
-static void FAST_FUNC sha1_process_block64(sha1_ctx_t *ctx)
-{
- unsigned t;
- uint32_t W[80], a, b, c, d, e;
- const uint32_t *words = (uint32_t*) ctx->wbuffer;
-
- for (t = 0; t < 16; ++t)
- W[t] = SWAP_BE32(words[t]);
- for (/*t = 16*/; t < 80; ++t) {
- uint32_t T = W[t - 3] ^ W[t - 8] ^ W[t - 14] ^ W[t - 16];
- W[t] = rotl32(T, 1);
- }
+/* 0: fastest, 3: smallest */
+#if CONFIG_MD5_SMALL < 0
+# define MD5_SMALL 0
+#elif CONFIG_MD5_SMALL > 3
+# define MD5_SMALL 3
+#else
+# define MD5_SMALL CONFIG_MD5_SMALL
+#endif
- a = ctx->hash[0];
- b = ctx->hash[1];
- c = ctx->hash[2];
- d = ctx->hash[3];
- e = ctx->hash[4];
+/* These are the four functions used in the four steps of the MD5 algorithm
+ * and defined in the RFC 1321. The first function is a little bit optimized
+ * (as found in Colin Plumbs public domain implementation).
+ * #define FF(b, c, d) ((b & c) | (~b & d))
+ */
+#undef FF
+#undef FG
+#undef FH
+#undef FI
+#define FF(b, c, d) (d ^ (b & (c ^ d)))
+#define FG(b, c, d) FF(d, b, c)
+#define FH(b, c, d) (b ^ c ^ d)
+#define FI(b, c, d) (c ^ (b | ~d))
-#undef ch
-#undef parity
-#undef maj
-#undef rnd
-#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) | (y))))
-/* A normal version as set out in the FIPS. */
-#define rnd(f,k) \
- do { \
- uint32_t T = a; \
- a = rotl32(a, 5) + f(b, c, d) + e + k + W[t]; \
- e = d; \
- d = c; \
- c = rotl32(b, 30); \
- b = T; \
- } while (0)
+/* Hash a single block, 64 bytes long and 4-byte aligned */
+static void FAST_FUNC md5_process_block64(md5_ctx_t *ctx)
+{
+#if MD5_SMALL > 0
+ /* Before we start, one word to the strange constants.
+ They are defined in RFC 1321 as
+ T[i] = (int)(4294967296.0 * fabs(sin(i))), i=1..64
+ */
+ static const uint32_t C_array[] = {
+ /* round 1 */
+ 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
+ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
+ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
+ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
+ /* round 2 */
+ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
+ 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8,
+ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
+ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
+ /* round 3 */
+ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
+ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
+ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05,
+ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
+ /* round 4 */
+ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
+ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
+ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
+ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391
+ };
+ static const char P_array[] ALIGN1 = {
+# if MD5_SMALL > 1
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */
+# endif
+ 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */
+ 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */
+ 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */
+ };
+#endif
+ uint32_t *words = (void*) ctx->wbuffer;
+ uint32_t A = ctx->hash[0];
+ uint32_t B = ctx->hash[1];
+ uint32_t C = ctx->hash[2];
+ uint32_t D = ctx->hash[3];
- for (t = 0; t < 20; ++t)
- rnd(ch, 0x5a827999);
+#if MD5_SMALL >= 2 /* 2 or 3 */
- for (/*t = 20*/; t < 40; ++t)
- rnd(parity, 0x6ed9eba1);
+ static const char S_array[] ALIGN1 = {
+ 7, 12, 17, 22,
+ 5, 9, 14, 20,
+ 4, 11, 16, 23,
+ 6, 10, 15, 21
+ };
+ const uint32_t *pc;
+ const char *pp;
+ const char *ps;
+ int i;
+ uint32_t temp;
- for (/*t = 40*/; t < 60; ++t)
- rnd(maj, 0x8f1bbcdc);
+ if (BB_BIG_ENDIAN)
+ for (i = 0; i < 16; i++)
+ words[i] = SWAP_LE32(words[i]);
- for (/*t = 60*/; t < 80; ++t)
- rnd(parity, 0xca62c1d6);
-#undef ch
-#undef parity
-#undef maj
-#undef rnd
+# if MD5_SMALL == 3
+ pc = C_array;
+ pp = P_array;
+ ps = S_array - 4;
- ctx->hash[0] += a;
- ctx->hash[1] += b;
- ctx->hash[2] += c;
- ctx->hash[3] += d;
- ctx->hash[4] += e;
-}
+ for (i = 0; i < 64; i++) {
+ if ((i & 0x0f) == 0)
+ ps += 4;
+ temp = A;
+ switch (i >> 4) {
+ case 0:
+ temp += FF(B, C, D);
+ break;
+ case 1:
+ temp += FG(B, C, D);
+ break;
+ case 2:
+ temp += FH(B, C, D);
+ break;
+ case 3:
+ temp += FI(B, C, D);
+ }
+ temp += words[(int) (*pp++)] + *pc++;
+ temp = rotl32(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+# else /* MD5_SMALL == 2 */
+ pc = C_array;
+ pp = P_array;
+ ps = S_array;
-/* Constants for SHA512 from FIPS 180-2:4.2.3.
- * SHA256 constants from FIPS 180-2:4.2.2
- * are the most significant half of first 64 elements
- * of the same array.
- */
-static const uint64_t sha_K[80] = {
- 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL,
- 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL,
- 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
- 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL,
- 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL,
- 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL,
- 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL,
- 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL,
- 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL,
- 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL,
- 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL,
- 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL,
- 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL,
- 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL,
- 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL,
- 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL,
- 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL,
- 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL,
- 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL,
- 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL,
- 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL,
- 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL,
- 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL,
- 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL,
- 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL,
- 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL,
- 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL,
- 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL,
- 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL,
- 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL,
- 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL,
- 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL,
- 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, /* [64]+ are used for sha512 only */
- 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL,
- 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL,
- 0x113f9804bef90daeULL, 0x1b710b35131c471bULL,
- 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL,
- 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL,
- 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL,
- 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL
-};
+ for (i = 0; i < 16; i++) {
+ temp = A + FF(B, C, D) + words[(int) (*pp++)] + *pc++;
+ temp = rotl32(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FG(B, C, D) + words[(int) (*pp++)] + *pc++;
+ temp = rotl32(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FH(B, C, D) + words[(int) (*pp++)] + *pc++;
+ temp = rotl32(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FI(B, C, D) + words[(int) (*pp++)] + *pc++;
+ temp = rotl32(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+# endif
+ /* Add checksum to the starting values */
+ ctx->hash[0] += A;
+ ctx->hash[1] += B;
+ ctx->hash[2] += C;
+ ctx->hash[3] += D;
-#undef Ch
-#undef Maj
-#undef S0
-#undef S1
-#undef R0
-#undef R1
-
-static void FAST_FUNC sha256_process_block64(sha256_ctx_t *ctx)
-{
- unsigned t;
- uint32_t W[64], a, b, c, d, e, f, g, h;
- const uint32_t *words = (uint32_t*) ctx->wbuffer;
-
- /* Operators defined in FIPS 180-2:4.1.2. */
-#define Ch(x, y, z) ((x & y) ^ (~x & z))
-#define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z))
-#define S0(x) (rotr32(x, 2) ^ rotr32(x, 13) ^ rotr32(x, 22))
-#define S1(x) (rotr32(x, 6) ^ rotr32(x, 11) ^ rotr32(x, 25))
-#define R0(x) (rotr32(x, 7) ^ rotr32(x, 18) ^ (x >> 3))
-#define R1(x) (rotr32(x, 17) ^ rotr32(x, 19) ^ (x >> 10))
-
- /* Compute the message schedule according to FIPS 180-2:6.2.2 step 2. */
- for (t = 0; t < 16; ++t)
- W[t] = SWAP_BE32(words[t]);
- for (/*t = 16*/; t < 64; ++t)
- W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16];
-
- a = ctx->hash[0];
- b = ctx->hash[1];
- c = ctx->hash[2];
- d = ctx->hash[3];
- e = ctx->hash[4];
- f = ctx->hash[5];
- g = ctx->hash[6];
- h = ctx->hash[7];
-
- /* The actual computation according to FIPS 180-2:6.2.2 step 3. */
- for (t = 0; t < 64; ++t) {
- /* Need to fetch upper half of sha_K[t]
- * (I hope compiler is clever enough to just fetch
- * upper half)
- */
- uint32_t K_t = sha_K[t] >> 32;
- uint32_t T1 = h + S1(e) + Ch(e, f, g) + K_t + W[t];
- uint32_t T2 = S0(a) + Maj(a, b, c);
- h = g;
- g = f;
- f = e;
- e = d + T1;
- d = c;
- c = b;
- b = a;
- a = T1 + T2;
- }
-#undef Ch
-#undef Maj
-#undef S0
-#undef S1
-#undef R0
-#undef R1
- /* Add the starting values of the context according to FIPS 180-2:6.2.2
- step 4. */
- ctx->hash[0] += a;
- ctx->hash[1] += b;
- ctx->hash[2] += c;
- ctx->hash[3] += d;
- ctx->hash[4] += e;
- ctx->hash[5] += f;
- ctx->hash[6] += g;
- ctx->hash[7] += h;
-}
-
-static void FAST_FUNC sha512_process_block128(sha512_ctx_t *ctx)
-{
- unsigned t;
- uint64_t W[80];
- /* On i386, having assignments here (not later as sha256 does)
- * produces 99 bytes smaller code with gcc 4.3.1
- */
- uint64_t a = ctx->hash[0];
- uint64_t b = ctx->hash[1];
- uint64_t c = ctx->hash[2];
- uint64_t d = ctx->hash[3];
- uint64_t e = ctx->hash[4];
- uint64_t f = ctx->hash[5];
- uint64_t g = ctx->hash[6];
- uint64_t h = ctx->hash[7];
- const uint64_t *words = (uint64_t*) ctx->wbuffer;
-
- /* Operators defined in FIPS 180-2:4.1.2. */
-#define Ch(x, y, z) ((x & y) ^ (~x & z))
-#define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z))
-#define S0(x) (rotr64(x, 28) ^ rotr64(x, 34) ^ rotr64(x, 39))
-#define S1(x) (rotr64(x, 14) ^ rotr64(x, 18) ^ rotr64(x, 41))
-#define R0(x) (rotr64(x, 1) ^ rotr64(x, 8) ^ (x >> 7))
-#define R1(x) (rotr64(x, 19) ^ rotr64(x, 61) ^ (x >> 6))
-
- /* Compute the message schedule according to FIPS 180-2:6.3.2 step 2. */
- for (t = 0; t < 16; ++t)
- W[t] = SWAP_BE64(words[t]);
- for (/*t = 16*/; t < 80; ++t)
- W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16];
-
- /* The actual computation according to FIPS 180-2:6.3.2 step 3. */
- for (t = 0; t < 80; ++t) {
- uint64_t T1 = h + S1(e) + Ch(e, f, g) + sha_K[t] + W[t];
- uint64_t T2 = S0(a) + Maj(a, b, c);
- h = g;
- g = f;
- f = e;
- e = d + T1;
- d = c;
- c = b;
- b = a;
- a = T1 + T2;
- }
-#undef Ch
-#undef Maj
-#undef S0
-#undef S1
-#undef R0
-#undef R1
- /* Add the starting values of the context according to FIPS 180-2:6.3.2
- step 4. */
- ctx->hash[0] += a;
- ctx->hash[1] += b;
- ctx->hash[2] += c;
- ctx->hash[3] += d;
- ctx->hash[4] += e;
- ctx->hash[5] += f;
- ctx->hash[6] += g;
- ctx->hash[7] += h;
-}
-
-
-void FAST_FUNC sha1_begin(sha1_ctx_t *ctx)
-{
- ctx->hash[0] = 0x67452301;
- ctx->hash[1] = 0xefcdab89;
- ctx->hash[2] = 0x98badcfe;
- ctx->hash[3] = 0x10325476;
- ctx->hash[4] = 0xc3d2e1f0;
- ctx->total64 = 0;
- ctx->process_block = sha1_process_block64;
-}
-
-static const uint32_t init256[] = {
- 0,
- 0,
- 0x6a09e667,
- 0xbb67ae85,
- 0x3c6ef372,
- 0xa54ff53a,
- 0x510e527f,
- 0x9b05688c,
- 0x1f83d9ab,
- 0x5be0cd19,
-};
-static const uint32_t init512_lo[] = {
- 0,
- 0,
- 0xf3bcc908,
- 0x84caa73b,
- 0xfe94f82b,
- 0x5f1d36f1,
- 0xade682d1,
- 0x2b3e6c1f,
- 0xfb41bd6b,
- 0x137e2179,
-};
-
-/* Initialize structure containing state of computation.
- (FIPS 180-2:5.3.2) */
-void FAST_FUNC sha256_begin(sha256_ctx_t *ctx)
-{
- memcpy(&ctx->total64, init256, sizeof(init256));
- /*ctx->total64 = 0; - done by prepending two 32-bit zeros to init256 */
- ctx->process_block = sha256_process_block64;
-}
-
-/* Initialize structure containing state of computation.
- (FIPS 180-2:5.3.3) */
-void FAST_FUNC sha512_begin(sha512_ctx_t *ctx)
-{
- int i;
- /* Two extra iterations zero out ctx->total64[2] */
- uint64_t *tp = ctx->total64;
- for (i = 0; i < 2+8; i++)
- tp[i] = ((uint64_t)(init256[i]) << 32) + init512_lo[i];
- /*ctx->total64[0] = ctx->total64[1] = 0; - already done */
-}
-
-
-/* Used also for sha256 */
-void FAST_FUNC sha1_hash(sha1_ctx_t *ctx, const void *buffer, size_t len)
-{
- unsigned bufpos = ctx->total64 & 63;
- unsigned remaining;
-
- ctx->total64 += len;
-#if 0
- remaining = 64 - bufpos;
-
- /* Hash whole blocks */
- while (len >= remaining) {
- memcpy(ctx->wbuffer + bufpos, buffer, remaining);
- buffer = (const char *)buffer + remaining;
- len -= remaining;
- remaining = 64;
- bufpos = 0;
- ctx->process_block(ctx);
- }
-
- /* Save last, partial blosk */
- memcpy(ctx->wbuffer + bufpos, buffer, len);
-#else
- /* Tiny bit smaller code */
- while (1) {
- remaining = 64 - bufpos;
- if (remaining > len)
- remaining = len;
- /* Copy data into aligned buffer */
- memcpy(ctx->wbuffer + bufpos, buffer, remaining);
- len -= remaining;
- buffer = (const char *)buffer + remaining;
- bufpos += remaining;
- /* clever way to do "if (bufpos != 64) break; ... ; bufpos = 0;" */
- bufpos -= 64;
- if (bufpos != 0)
- break;
- /* Buffer is filled up, process it */
- ctx->process_block(ctx);
- /*bufpos = 0; - already is */
- }
-#endif
-}
-
-void FAST_FUNC sha512_hash(sha512_ctx_t *ctx, const void *buffer, size_t len)
-{
- unsigned bufpos = ctx->total64[0] & 127;
- unsigned remaining;
-
- /* First increment the byte count. FIPS 180-2 specifies the possible
- length of the file up to 2^128 _bits_.
- We compute the number of _bytes_ and convert to bits later. */
- ctx->total64[0] += len;
- if (ctx->total64[0] < len)
- ctx->total64[1]++;
-#if 0
- remaining = 128 - bufpos;
-
- /* Hash whole blocks */
- while (len >= remaining) {
- memcpy(ctx->wbuffer + bufpos, buffer, remaining);
- buffer = (const char *)buffer + remaining;
- len -= remaining;
- remaining = 128;
- bufpos = 0;
- sha512_process_block128(ctx);
- }
-
- /* Save last, partial blosk */
- memcpy(ctx->wbuffer + bufpos, buffer, len);
-#else
- while (1) {
- remaining = 128 - bufpos;
- if (remaining > len)
- remaining = len;
- /* Copy data into aligned buffer */
- memcpy(ctx->wbuffer + bufpos, buffer, remaining);
- len -= remaining;
- buffer = (const char *)buffer + remaining;
- bufpos += remaining;
- /* clever way to do "if (bufpos != 128) break; ... ; bufpos = 0;" */
- bufpos -= 128;
- if (bufpos != 0)
- break;
- /* Buffer is filled up, process it */
- sha512_process_block128(ctx);
- /*bufpos = 0; - already is */
- }
-#endif
-}
-
-
-/* Used also for sha256 */
-void FAST_FUNC sha1_end(sha1_ctx_t *ctx, void *resbuf)
-{
- unsigned hash_size;
-
- /* SHA stores total in BE, need to swap on LE arches: */
- common64_end(ctx, (process_block64_func*) ctx->process_block, /*swap_needed:*/ BB_LITTLE_ENDIAN);
-
- hash_size = (ctx->process_block == sha1_process_block64) ? 5 : 8;
- /* This way we do not impose alignment constraints on resbuf: */
- if (BB_LITTLE_ENDIAN) {
- unsigned i;
- for (i = 0; i < hash_size; ++i)
- ctx->hash[i] = SWAP_BE32(ctx->hash[i]);
- }
- memcpy(resbuf, ctx->hash, sizeof(ctx->hash[0]) * hash_size);
-}
-
-void FAST_FUNC sha512_end(sha512_ctx_t *ctx, void *resbuf)
-{
- unsigned bufpos = ctx->total64[0] & 127;
-
- /* Pad the buffer to the next 128-byte boundary with 0x80,0,0,0... */
- ctx->wbuffer[bufpos++] = 0x80;
-
- while (1) {
- unsigned remaining = 128 - bufpos;
- memset(ctx->wbuffer + bufpos, 0, remaining);
- if (remaining >= 16) {
- /* Store the 128-bit counter of bits in the buffer in BE format */
- uint64_t t;
- t = ctx->total64[0] << 3;
- t = SWAP_BE64(t);
- *(uint64_t *) (&ctx->wbuffer[128 - 8]) = t;
- t = (ctx->total64[1] << 3) | (ctx->total64[0] >> 61);
- t = SWAP_BE64(t);
- *(uint64_t *) (&ctx->wbuffer[128 - 16]) = t;
- }
- sha512_process_block128(ctx);
- if (remaining >= 16)
- break;
- bufpos = 0;
- }
-
- if (BB_LITTLE_ENDIAN) {
- unsigned i;
- for (i = 0; i < ARRAY_SIZE(ctx->hash); ++i)
- ctx->hash[i] = SWAP_BE64(ctx->hash[i]);
- }
- memcpy(resbuf, ctx->hash, sizeof(ctx->hash));
-}
-
-
-/*
- * Compute MD5 checksum of strings according to the
- * definition of MD5 in RFC 1321 from April 1992.
- *
- * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
- *
- * Copyright (C) 1995-1999 Free Software Foundation, Inc.
- * Copyright (C) 2001 Manuel Novoa III
- * Copyright (C) 2003 Glenn L. McGrath
- * Copyright (C) 2003 Erik Andersen
- *
- * Licensed under GPLv2 or later, see file LICENSE in this source tree.
- */
-
-/* 0: fastest, 3: smallest */
-#if CONFIG_MD5_SIZE_VS_SPEED < 0
-# define MD5_SIZE_VS_SPEED 0
-#elif CONFIG_MD5_SIZE_VS_SPEED > 3
-# define MD5_SIZE_VS_SPEED 3
-#else
-# define MD5_SIZE_VS_SPEED CONFIG_MD5_SIZE_VS_SPEED
-#endif
-
-/* Initialize structure containing state of computation.
- * (RFC 1321, 3.3: Step 3)
- */
-void FAST_FUNC md5_begin(md5_ctx_t *ctx)
-{
- ctx->A = 0x67452301;
- ctx->B = 0xefcdab89;
- ctx->C = 0x98badcfe;
- ctx->D = 0x10325476;
- ctx->total64 = 0;
-}
-
-/* These are the four functions used in the four steps of the MD5 algorithm
- * and defined in the RFC 1321. The first function is a little bit optimized
- * (as found in Colin Plumbs public domain implementation).
- * #define FF(b, c, d) ((b & c) | (~b & d))
- */
-#undef FF
-#undef FG
-#undef FH
-#undef FI
-#define FF(b, c, d) (d ^ (b & (c ^ d)))
-#define FG(b, c, d) FF(d, b, c)
-#define FH(b, c, d) (b ^ c ^ d)
-#define FI(b, c, d) (c ^ (b | ~d))
-
-/* Hash a single block, 64 bytes long and 4-byte aligned */
-static void FAST_FUNC md5_process_block64(md5_ctx_t *ctx)
-{
-#if MD5_SIZE_VS_SPEED > 0
- /* Before we start, one word to the strange constants.
- They are defined in RFC 1321 as
- T[i] = (int)(4294967296.0 * fabs(sin(i))), i=1..64
- */
- static const uint32_t C_array[] = {
- /* round 1 */
- 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
- 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
- 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
- 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
- /* round 2 */
- 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
- 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8,
- 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
- 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
- /* round 3 */
- 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
- 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
- 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05,
- 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
- /* round 4 */
- 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
- 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
- 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
- 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391
- };
- static const char P_array[] ALIGN1 = {
-# if MD5_SIZE_VS_SPEED > 1
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */
-# endif
- 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */
- 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */
- 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */
- };
-#endif
- uint32_t *words = (void*) ctx->wbuffer;
- uint32_t A = ctx->A;
- uint32_t B = ctx->B;
- uint32_t C = ctx->C;
- uint32_t D = ctx->D;
-
-#if MD5_SIZE_VS_SPEED >= 2 /* 2 or 3 */
-
- static const char S_array[] ALIGN1 = {
- 7, 12, 17, 22,
- 5, 9, 14, 20,
- 4, 11, 16, 23,
- 6, 10, 15, 21
- };
- const uint32_t *pc;
- const char *pp;
- const char *ps;
- int i;
- uint32_t temp;
-
-# if BB_BIG_ENDIAN
- for (i = 0; i < 16; i++)
- words[i] = SWAP_LE32(words[i]);
-# endif
-
-# if MD5_SIZE_VS_SPEED == 3
- pc = C_array;
- pp = P_array;
- ps = S_array - 4;
-
- for (i = 0; i < 64; i++) {
- if ((i & 0x0f) == 0)
- ps += 4;
- temp = A;
- switch (i >> 4) {
- case 0:
- temp += FF(B, C, D);
- break;
- case 1:
- temp += FG(B, C, D);
- break;
- case 2:
- temp += FH(B, C, D);
- break;
- case 3:
- temp += FI(B, C, D);
- }
- temp += words[(int) (*pp++)] + *pc++;
- temp = rotl32(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
-# else /* MD5_SIZE_VS_SPEED == 2 */
- pc = C_array;
- pp = P_array;
- ps = S_array;
-
- for (i = 0; i < 16; i++) {
- temp = A + FF(B, C, D) + words[(int) (*pp++)] + *pc++;
- temp = rotl32(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FG(B, C, D) + words[(int) (*pp++)] + *pc++;
- temp = rotl32(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FH(B, C, D) + words[(int) (*pp++)] + *pc++;
- temp = rotl32(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FI(B, C, D) + words[(int) (*pp++)] + *pc++;
- temp = rotl32(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
-# endif
- /* Add checksum to the starting values */
- ctx->A += A;
- ctx->B += B;
- ctx->C += C;
- ctx->D += D;
-
-#else /* MD5_SIZE_VS_SPEED == 0 or 1 */
+#else /* MD5_SMALL == 0 or 1 */
uint32_t A_save = A;
uint32_t B_save = B;
uint32_t C_save = C;
uint32_t D_save = D;
-# if MD5_SIZE_VS_SPEED == 1
+# if MD5_SMALL == 1
const uint32_t *pc;
const char *pp;
int i;
} while (0)
/* Round 1 */
-# if MD5_SIZE_VS_SPEED == 1
+# if MD5_SMALL == 1
pc = C_array;
for (i = 0; i < 4; i++) {
OP(A, B, C, D, 7, *pc++);
} while (0)
/* Round 2 */
-# if MD5_SIZE_VS_SPEED == 1
+# if MD5_SMALL == 1
pp = P_array;
for (i = 0; i < 4; i++) {
OP(FG, A, B, C, D, (int) (*pp++), 5, *pc++);
# endif
/* Round 3 */
-# if MD5_SIZE_VS_SPEED == 1
+# if MD5_SMALL == 1
for (i = 0; i < 4; i++) {
OP(FH, A, B, C, D, (int) (*pp++), 4, *pc++);
OP(FH, D, A, B, C, (int) (*pp++), 11, *pc++);
OP(FH, B, C, D, A, 2, 23, 0xc4ac5665);
# endif
- /* Round 4 */
-# if MD5_SIZE_VS_SPEED == 1
- for (i = 0; i < 4; i++) {
- OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++);
- OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++);
- OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++);
- OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++);
+ /* Round 4 */
+# if MD5_SMALL == 1
+ for (i = 0; i < 4; i++) {
+ OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++);
+ OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++);
+ OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++);
+ OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++);
+ }
+# else
+ OP(FI, A, B, C, D, 0, 6, 0xf4292244);
+ OP(FI, D, A, B, C, 7, 10, 0x432aff97);
+ OP(FI, C, D, A, B, 14, 15, 0xab9423a7);
+ OP(FI, B, C, D, A, 5, 21, 0xfc93a039);
+ OP(FI, A, B, C, D, 12, 6, 0x655b59c3);
+ OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92);
+ OP(FI, C, D, A, B, 10, 15, 0xffeff47d);
+ OP(FI, B, C, D, A, 1, 21, 0x85845dd1);
+ OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f);
+ OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
+ OP(FI, C, D, A, B, 6, 15, 0xa3014314);
+ OP(FI, B, C, D, A, 13, 21, 0x4e0811a1);
+ OP(FI, A, B, C, D, 4, 6, 0xf7537e82);
+ OP(FI, D, A, B, C, 11, 10, 0xbd3af235);
+ OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
+ OP(FI, B, C, D, A, 9, 21, 0xeb86d391);
+# undef OP
+# endif
+ /* Add checksum to the starting values */
+ ctx->hash[0] = A_save + A;
+ ctx->hash[1] = B_save + B;
+ ctx->hash[2] = C_save + C;
+ ctx->hash[3] = D_save + D;
+#endif
+}
+#undef FF
+#undef FG
+#undef FH
+#undef FI
+
+/* Initialize structure containing state of computation.
+ * (RFC 1321, 3.3: Step 3)
+ */
+void FAST_FUNC md5_begin(md5_ctx_t *ctx)
+{
+ ctx->hash[0] = 0x67452301;
+ ctx->hash[1] = 0xefcdab89;
+ ctx->hash[2] = 0x98badcfe;
+ ctx->hash[3] = 0x10325476;
+ ctx->total64 = 0;
+ ctx->process_block = md5_process_block64;
+}
+
+/* Used also for sha1 and sha256 */
+void FAST_FUNC md5_hash(md5_ctx_t *ctx, const void *buffer, size_t len)
+{
+ common64_hash(ctx, buffer, len);
+}
+
+/* Process the remaining bytes in the buffer and put result from CTX
+ * in first 16 bytes following RESBUF. The result is always in little
+ * endian byte order, so that a byte-wise output yields to the wanted
+ * ASCII representation of the message digest.
+ */
+void FAST_FUNC md5_end(md5_ctx_t *ctx, void *resbuf)
+{
+ /* MD5 stores total in LE, need to swap on BE arches: */
+ common64_end(ctx, /*swap_needed:*/ BB_BIG_ENDIAN);
+
+ /* The MD5 result is in little endian byte order */
+ if (BB_BIG_ENDIAN) {
+ ctx->hash[0] = SWAP_LE32(ctx->hash[0]);
+ ctx->hash[1] = SWAP_LE32(ctx->hash[1]);
+ ctx->hash[2] = SWAP_LE32(ctx->hash[2]);
+ ctx->hash[3] = SWAP_LE32(ctx->hash[3]);
+ }
+
+ memcpy(resbuf, ctx->hash, sizeof(ctx->hash[0]) * 4);
+}
+
+
+/*
+ * SHA1 part is:
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
+ * Based on the public domain SHA-1 in C by Steve Reid <steve@edmweb.com>
+ * from http://www.mirrors.wiretapped.net/security/cryptography/hashes/sha1/
+ *
+ * Licensed under GPLv2, see file LICENSE in this source tree.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * SHA256 and SHA512 parts are:
+ * Released into the Public Domain by Ulrich Drepper <drepper@redhat.com>.
+ * Shrank by Denys Vlasenko.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * The best way to test random blocksizes is to go to coreutils/md5_sha1_sum.c
+ * and replace "4096" with something like "2000 + time(NULL) % 2097",
+ * then rebuild and compare "shaNNNsum bigfile" results.
+ */
+
+static void FAST_FUNC sha1_process_block64(sha1_ctx_t *ctx)
+{
+ static const uint32_t rconsts[] = {
+ 0x5A827999, 0x6ED9EBA1, 0x8F1BBCDC, 0xCA62C1D6
+ };
+ int i, j;
+ int cnt;
+ uint32_t W[16+16];
+ uint32_t a, b, c, d, e;
+
+ /* On-stack work buffer frees up one register in the main loop
+ * which otherwise will be needed to hold ctx pointer */
+ for (i = 0; i < 16; i++)
+ W[i] = W[i+16] = SWAP_BE32(((uint32_t*)ctx->wbuffer)[i]);
+
+ a = ctx->hash[0];
+ b = ctx->hash[1];
+ c = ctx->hash[2];
+ d = ctx->hash[3];
+ e = ctx->hash[4];
+
+ /* 4 rounds of 20 operations each */
+ cnt = 0;
+ for (i = 0; i < 4; i++) {
+ j = 19;
+ do {
+ uint32_t work;
+
+ work = c ^ d;
+ if (i == 0) {
+ work = (work & b) ^ d;
+ if (j <= 3)
+ goto ge16;
+ /* Used to do SWAP_BE32 here, but this
+ * requires ctx (see comment above) */
+ work += W[cnt];
+ } else {
+ if (i == 2)
+ work = ((b | c) & d) | (b & c);
+ else /* i = 1 or 3 */
+ work ^= b;
+ ge16:
+ W[cnt] = W[cnt+16] = rotl32(W[cnt+13] ^ W[cnt+8] ^ W[cnt+2] ^ W[cnt], 1);
+ work += W[cnt];
+ }
+ work += e + rotl32(a, 5) + rconsts[i];
+
+ /* Rotate by one for next time */
+ e = d;
+ d = c;
+ c = /* b = */ rotl32(b, 30);
+ b = a;
+ a = work;
+ cnt = (cnt + 1) & 15;
+ } while (--j >= 0);
+ }
+
+ ctx->hash[0] += a;
+ ctx->hash[1] += b;
+ ctx->hash[2] += c;
+ ctx->hash[3] += d;
+ ctx->hash[4] += e;
+}
+
+/* Constants for SHA512 from FIPS 180-2:4.2.3.
+ * SHA256 constants from FIPS 180-2:4.2.2
+ * are the most significant half of first 64 elements
+ * of the same array.
+ */
+static const uint64_t sha_K[80] = {
+ 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL,
+ 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL,
+ 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
+ 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL,
+ 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL,
+ 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL,
+ 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL,
+ 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL,
+ 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL,
+ 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL,
+ 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL,
+ 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL,
+ 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL,
+ 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL,
+ 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL,
+ 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL,
+ 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL,
+ 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL,
+ 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL,
+ 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL,
+ 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL,
+ 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL,
+ 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL,
+ 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL,
+ 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL,
+ 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL,
+ 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL,
+ 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL,
+ 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL,
+ 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL,
+ 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL,
+ 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL,
+ 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, /* [64]+ are used for sha512 only */
+ 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL,
+ 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL,
+ 0x113f9804bef90daeULL, 0x1b710b35131c471bULL,
+ 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL,
+ 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL,
+ 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL,
+ 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL
+};
+
+#undef Ch
+#undef Maj
+#undef S0
+#undef S1
+#undef R0
+#undef R1
+
+static void FAST_FUNC sha256_process_block64(sha256_ctx_t *ctx)
+{
+ unsigned t;
+ uint32_t W[64], a, b, c, d, e, f, g, h;
+ const uint32_t *words = (uint32_t*) ctx->wbuffer;
+
+ /* Operators defined in FIPS 180-2:4.1.2. */
+#define Ch(x, y, z) ((x & y) ^ (~x & z))
+#define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z))
+#define S0(x) (rotr32(x, 2) ^ rotr32(x, 13) ^ rotr32(x, 22))
+#define S1(x) (rotr32(x, 6) ^ rotr32(x, 11) ^ rotr32(x, 25))
+#define R0(x) (rotr32(x, 7) ^ rotr32(x, 18) ^ (x >> 3))
+#define R1(x) (rotr32(x, 17) ^ rotr32(x, 19) ^ (x >> 10))
+
+ /* Compute the message schedule according to FIPS 180-2:6.2.2 step 2. */
+ for (t = 0; t < 16; ++t)
+ W[t] = SWAP_BE32(words[t]);
+ for (/*t = 16*/; t < 64; ++t)
+ W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16];
+
+ a = ctx->hash[0];
+ b = ctx->hash[1];
+ c = ctx->hash[2];
+ d = ctx->hash[3];
+ e = ctx->hash[4];
+ f = ctx->hash[5];
+ g = ctx->hash[6];
+ h = ctx->hash[7];
+
+ /* The actual computation according to FIPS 180-2:6.2.2 step 3. */
+ for (t = 0; t < 64; ++t) {
+ /* Need to fetch upper half of sha_K[t]
+ * (I hope compiler is clever enough to just fetch
+ * upper half)
+ */
+ uint32_t K_t = sha_K[t] >> 32;
+ uint32_t T1 = h + S1(e) + Ch(e, f, g) + K_t + W[t];
+ uint32_t T2 = S0(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+ }
+#undef Ch
+#undef Maj
+#undef S0
+#undef S1
+#undef R0
+#undef R1
+ /* Add the starting values of the context according to FIPS 180-2:6.2.2
+ step 4. */
+ ctx->hash[0] += a;
+ ctx->hash[1] += b;
+ ctx->hash[2] += c;
+ ctx->hash[3] += d;
+ ctx->hash[4] += e;
+ ctx->hash[5] += f;
+ ctx->hash[6] += g;
+ ctx->hash[7] += h;
+}
+
+static void FAST_FUNC sha512_process_block128(sha512_ctx_t *ctx)
+{
+ unsigned t;
+ uint64_t W[80];
+ /* On i386, having assignments here (not later as sha256 does)
+ * produces 99 bytes smaller code with gcc 4.3.1
+ */
+ uint64_t a = ctx->hash[0];
+ uint64_t b = ctx->hash[1];
+ uint64_t c = ctx->hash[2];
+ uint64_t d = ctx->hash[3];
+ uint64_t e = ctx->hash[4];
+ uint64_t f = ctx->hash[5];
+ uint64_t g = ctx->hash[6];
+ uint64_t h = ctx->hash[7];
+ const uint64_t *words = (uint64_t*) ctx->wbuffer;
+
+ /* Operators defined in FIPS 180-2:4.1.2. */
+#define Ch(x, y, z) ((x & y) ^ (~x & z))
+#define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z))
+#define S0(x) (rotr64(x, 28) ^ rotr64(x, 34) ^ rotr64(x, 39))
+#define S1(x) (rotr64(x, 14) ^ rotr64(x, 18) ^ rotr64(x, 41))
+#define R0(x) (rotr64(x, 1) ^ rotr64(x, 8) ^ (x >> 7))
+#define R1(x) (rotr64(x, 19) ^ rotr64(x, 61) ^ (x >> 6))
+
+ /* Compute the message schedule according to FIPS 180-2:6.3.2 step 2. */
+ for (t = 0; t < 16; ++t)
+ W[t] = SWAP_BE64(words[t]);
+ for (/*t = 16*/; t < 80; ++t)
+ W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16];
+
+ /* The actual computation according to FIPS 180-2:6.3.2 step 3. */
+ for (t = 0; t < 80; ++t) {
+ uint64_t T1 = h + S1(e) + Ch(e, f, g) + sha_K[t] + W[t];
+ uint64_t T2 = S0(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
}
-# else
- OP(FI, A, B, C, D, 0, 6, 0xf4292244);
- OP(FI, D, A, B, C, 7, 10, 0x432aff97);
- OP(FI, C, D, A, B, 14, 15, 0xab9423a7);
- OP(FI, B, C, D, A, 5, 21, 0xfc93a039);
- OP(FI, A, B, C, D, 12, 6, 0x655b59c3);
- OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92);
- OP(FI, C, D, A, B, 10, 15, 0xffeff47d);
- OP(FI, B, C, D, A, 1, 21, 0x85845dd1);
- OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f);
- OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
- OP(FI, C, D, A, B, 6, 15, 0xa3014314);
- OP(FI, B, C, D, A, 13, 21, 0x4e0811a1);
- OP(FI, A, B, C, D, 4, 6, 0xf7537e82);
- OP(FI, D, A, B, C, 11, 10, 0xbd3af235);
- OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
- OP(FI, B, C, D, A, 9, 21, 0xeb86d391);
-# undef OP
-# endif
- /* Add checksum to the starting values */
- ctx->A = A_save + A;
- ctx->B = B_save + B;
- ctx->C = C_save + C;
- ctx->D = D_save + D;
-#endif
+#undef Ch
+#undef Maj
+#undef S0
+#undef S1
+#undef R0
+#undef R1
+ /* Add the starting values of the context according to FIPS 180-2:6.3.2
+ step 4. */
+ ctx->hash[0] += a;
+ ctx->hash[1] += b;
+ ctx->hash[2] += c;
+ ctx->hash[3] += d;
+ ctx->hash[4] += e;
+ ctx->hash[5] += f;
+ ctx->hash[6] += g;
+ ctx->hash[7] += h;
}
-#undef FF
-#undef FG
-#undef FH
-#undef FI
-/* Feed data through a temporary buffer to call md5_hash_aligned_block()
- * with chunks of data that are 4-byte aligned and a multiple of 64 bytes.
- * This function's internal buffer remembers previous data until it has 64
- * bytes worth to pass on. Call md5_end() to flush this buffer. */
-void FAST_FUNC md5_hash(md5_ctx_t *ctx, const void *buffer, size_t len)
+
+void FAST_FUNC sha1_begin(sha1_ctx_t *ctx)
{
- unsigned bufpos = ctx->total64 & 63;
+ ctx->hash[0] = 0x67452301;
+ ctx->hash[1] = 0xefcdab89;
+ ctx->hash[2] = 0x98badcfe;
+ ctx->hash[3] = 0x10325476;
+ ctx->hash[4] = 0xc3d2e1f0;
+ ctx->total64 = 0;
+ ctx->process_block = sha1_process_block64;
+}
+
+static const uint32_t init256[] = {
+ 0,
+ 0,
+ 0x6a09e667,
+ 0xbb67ae85,
+ 0x3c6ef372,
+ 0xa54ff53a,
+ 0x510e527f,
+ 0x9b05688c,
+ 0x1f83d9ab,
+ 0x5be0cd19,
+};
+static const uint32_t init512_lo[] = {
+ 0,
+ 0,
+ 0xf3bcc908,
+ 0x84caa73b,
+ 0xfe94f82b,
+ 0x5f1d36f1,
+ 0xade682d1,
+ 0x2b3e6c1f,
+ 0xfb41bd6b,
+ 0x137e2179,
+};
+
+/* Initialize structure containing state of computation.
+ (FIPS 180-2:5.3.2) */
+void FAST_FUNC sha256_begin(sha256_ctx_t *ctx)
+{
+ memcpy(&ctx->total64, init256, sizeof(init256));
+ /*ctx->total64 = 0; - done by prepending two 32-bit zeros to init256 */
+ ctx->process_block = sha256_process_block64;
+}
+
+/* Initialize structure containing state of computation.
+ (FIPS 180-2:5.3.3) */
+void FAST_FUNC sha512_begin(sha512_ctx_t *ctx)
+{
+ int i;
+ /* Two extra iterations zero out ctx->total64[2] */
+ uint64_t *tp = ctx->total64;
+ for (i = 0; i < 2+8; i++)
+ tp[i] = ((uint64_t)(init256[i]) << 32) + init512_lo[i];
+ /*ctx->total64[0] = ctx->total64[1] = 0; - already done */
+}
+
+void FAST_FUNC sha512_hash(sha512_ctx_t *ctx, const void *buffer, size_t len)
+{
+ unsigned bufpos = ctx->total64[0] & 127;
unsigned remaining;
- /* RFC 1321 specifies the possible length of the file up to 2^64 bits.
- * Here we only track the number of bytes. */
- ctx->total64 += len;
+ /* First increment the byte count. FIPS 180-2 specifies the possible
+ length of the file up to 2^128 _bits_.
+ We compute the number of _bytes_ and convert to bits later. */
+ ctx->total64[0] += len;
+ if (ctx->total64[0] < len)
+ ctx->total64[1]++;
#if 0
- remaining = 64 - bufpos;
+ remaining = 128 - bufpos;
/* Hash whole blocks */
while (len >= remaining) {
memcpy(ctx->wbuffer + bufpos, buffer, remaining);
buffer = (const char *)buffer + remaining;
len -= remaining;
- remaining = 64;
+ remaining = 128;
bufpos = 0;
- md5_process_block64(ctx);
+ sha512_process_block128(ctx);
}
/* Save last, partial blosk */
memcpy(ctx->wbuffer + bufpos, buffer, len);
#else
- /* Tiny bit smaller code */
while (1) {
- remaining = 64 - bufpos;
+ remaining = 128 - bufpos;
if (remaining > len)
remaining = len;
/* Copy data into aligned buffer */
len -= remaining;
buffer = (const char *)buffer + remaining;
bufpos += remaining;
- /* clever way to do "if (bufpos != 64) break; ... ; bufpos = 0;" */
- bufpos -= 64;
+ /* Clever way to do "if (bufpos != N) break; ... ; bufpos = 0;" */
+ bufpos -= 128;
if (bufpos != 0)
break;
/* Buffer is filled up, process it */
- md5_process_block64(ctx);
+ sha512_process_block128(ctx);
/*bufpos = 0; - already is */
}
#endif
}
-/* Process the remaining bytes in the buffer and put result from CTX
- * in first 16 bytes following RESBUF. The result is always in little
- * endian byte order, so that a byte-wise output yields to the wanted
- * ASCII representation of the message digest.
+/* Used also for sha256 */
+void FAST_FUNC sha1_end(sha1_ctx_t *ctx, void *resbuf)
+{
+ unsigned hash_size;
+
+ /* SHA stores total in BE, need to swap on LE arches: */
+ common64_end(ctx, /*swap_needed:*/ BB_LITTLE_ENDIAN);
+
+ hash_size = (ctx->process_block == sha1_process_block64) ? 5 : 8;
+ /* This way we do not impose alignment constraints on resbuf: */
+ if (BB_LITTLE_ENDIAN) {
+ unsigned i;
+ for (i = 0; i < hash_size; ++i)
+ ctx->hash[i] = SWAP_BE32(ctx->hash[i]);
+ }
+ memcpy(resbuf, ctx->hash, sizeof(ctx->hash[0]) * hash_size);
+}
+
+void FAST_FUNC sha512_end(sha512_ctx_t *ctx, void *resbuf)
+{
+ unsigned bufpos = ctx->total64[0] & 127;
+
+ /* Pad the buffer to the next 128-byte boundary with 0x80,0,0,0... */
+ ctx->wbuffer[bufpos++] = 0x80;
+
+ while (1) {
+ unsigned remaining = 128 - bufpos;
+ memset(ctx->wbuffer + bufpos, 0, remaining);
+ if (remaining >= 16) {
+ /* Store the 128-bit counter of bits in the buffer in BE format */
+ uint64_t t;
+ t = ctx->total64[0] << 3;
+ t = SWAP_BE64(t);
+ *(uint64_t *) (&ctx->wbuffer[128 - 8]) = t;
+ t = (ctx->total64[1] << 3) | (ctx->total64[0] >> 61);
+ t = SWAP_BE64(t);
+ *(uint64_t *) (&ctx->wbuffer[128 - 16]) = t;
+ }
+ sha512_process_block128(ctx);
+ if (remaining >= 16)
+ break;
+ bufpos = 0;
+ }
+
+ if (BB_LITTLE_ENDIAN) {
+ unsigned i;
+ for (i = 0; i < ARRAY_SIZE(ctx->hash); ++i)
+ ctx->hash[i] = SWAP_BE64(ctx->hash[i]);
+ }
+ memcpy(resbuf, ctx->hash, sizeof(ctx->hash));
+}
+
+
+/*
+ * The Keccak sponge function, designed by Guido Bertoni, Joan Daemen,
+ * Michael Peeters and Gilles Van Assche. For more information, feedback or
+ * questions, please refer to our website: http://keccak.noekeon.org/
+ *
+ * Implementation by Ronny Van Keer,
+ * hereby denoted as "the implementer".
+ *
+ * To the extent possible under law, the implementer has waived all copyright
+ * and related or neighboring rights to the source code in this file.
+ * http://creativecommons.org/publicdomain/zero/1.0/
+ *
+ * Busybox modifications (C) Lauri Kasanen, under the GPLv2.
*/
-void FAST_FUNC md5_end(md5_ctx_t *ctx, void *resbuf)
+
+#if CONFIG_SHA3_SMALL < 0
+# define SHA3_SMALL 0
+#elif CONFIG_SHA3_SMALL > 1
+# define SHA3_SMALL 1
+#else
+# define SHA3_SMALL CONFIG_SHA3_SMALL
+#endif
+
+enum {
+ SHA3_IBLK_BYTES = 72, /* 576 bits / 8 */
+};
+
+/*
+ * In the crypto literature this function is usually called Keccak-f().
+ */
+static void sha3_process_block72(uint64_t *state)
{
- /* MD5 stores total in LE, need to swap on BE arches: */
- common64_end(ctx, (process_block64_func*) md5_process_block64, /*swap_needed:*/ BB_BIG_ENDIAN);
+ enum { NROUNDS = 24 };
- /* The MD5 result is in little endian byte order.
- * We (ab)use the fact that A-D are consecutive in memory.
+ /* Elements should be 64-bit, but top half is always zero or 0x80000000.
+ * We encode 63rd bits in a separate word below.
+ * Same is true for 31th bits, which lets us use 16-bit table instead of 64-bit.
+ * The speed penalty is lost in the noise.
*/
-#if BB_BIG_ENDIAN
- ctx->A = SWAP_LE32(ctx->A);
- ctx->B = SWAP_LE32(ctx->B);
- ctx->C = SWAP_LE32(ctx->C);
- ctx->D = SWAP_LE32(ctx->D);
+ static const uint16_t IOTA_CONST[NROUNDS] = {
+ 0x0001,
+ 0x8082,
+ 0x808a,
+ 0x8000,
+ 0x808b,
+ 0x0001,
+ 0x8081,
+ 0x8009,
+ 0x008a,
+ 0x0088,
+ 0x8009,
+ 0x000a,
+ 0x808b,
+ 0x008b,
+ 0x8089,
+ 0x8003,
+ 0x8002,
+ 0x0080,
+ 0x800a,
+ 0x000a,
+ 0x8081,
+ 0x8080,
+ 0x0001,
+ 0x8008,
+ };
+ /* bit for CONST[0] is in msb: 0011 0011 0000 0111 1101 1101 */
+ const uint32_t IOTA_CONST_bit63 = (uint32_t)(0x3307dd00);
+ /* bit for CONST[0] is in msb: 0001 0110 0011 1000 0001 1011 */
+ const uint32_t IOTA_CONST_bit31 = (uint32_t)(0x16381b00);
+
+ static const uint8_t ROT_CONST[24] = {
+ 1, 3, 6, 10, 15, 21, 28, 36, 45, 55, 2, 14,
+ 27, 41, 56, 8, 25, 43, 62, 18, 39, 61, 20, 44,
+ };
+ static const uint8_t PI_LANE[24] = {
+ 10, 7, 11, 17, 18, 3, 5, 16, 8, 21, 24, 4,
+ 15, 23, 19, 13, 12, 2, 20, 14, 22, 9, 6, 1,
+ };
+ /*static const uint8_t MOD5[10] = { 0, 1, 2, 3, 4, 0, 1, 2, 3, 4, };*/
+
+ unsigned x, y;
+ unsigned round;
+
+ if (BB_BIG_ENDIAN) {
+ for (x = 0; x < 25; x++) {
+ state[x] = SWAP_LE64(state[x]);
+ }
+ }
+
+ for (round = 0; round < NROUNDS; ++round) {
+ /* Theta */
+ {
+ uint64_t BC[10];
+ for (x = 0; x < 5; ++x) {
+ BC[x + 5] = BC[x] = state[x]
+ ^ state[x + 5] ^ state[x + 10]
+ ^ state[x + 15] ^ state[x + 20];
+ }
+ /* Using 2x5 vector above eliminates the need to use
+ * BC[MOD5[x+N]] trick below to fetch BC[(x+N) % 5],
+ * and the code is a bit _smaller_.
+ */
+ for (x = 0; x < 5; ++x) {
+ uint64_t temp = BC[x + 4] ^ rotl64(BC[x + 1], 1);
+ state[x] ^= temp;
+ state[x + 5] ^= temp;
+ state[x + 10] ^= temp;
+ state[x + 15] ^= temp;
+ state[x + 20] ^= temp;
+ }
+ }
+
+ /* Rho Pi */
+ if (SHA3_SMALL) {
+ uint64_t t1 = state[1];
+ for (x = 0; x < 24; ++x) {
+ uint64_t t0 = state[PI_LANE[x]];
+ state[PI_LANE[x]] = rotl64(t1, ROT_CONST[x]);
+ t1 = t0;
+ }
+ } else {
+ /* Especially large benefit for 32-bit arch (75% faster):
+ * 64-bit rotations by non-constant usually are SLOW on those.
+ * We resort to unrolling here.
+ * This optimizes out PI_LANE[] and ROT_CONST[],
+ * but generates 300-500 more bytes of code.
+ */
+ uint64_t t0;
+ uint64_t t1 = state[1];
+#define RhoPi_twice(x) \
+ t0 = state[PI_LANE[x ]]; \
+ state[PI_LANE[x ]] = rotl64(t1, ROT_CONST[x ]); \
+ t1 = state[PI_LANE[x+1]]; \
+ state[PI_LANE[x+1]] = rotl64(t0, ROT_CONST[x+1]);
+ RhoPi_twice(0); RhoPi_twice(2);
+ RhoPi_twice(4); RhoPi_twice(6);
+ RhoPi_twice(8); RhoPi_twice(10);
+ RhoPi_twice(12); RhoPi_twice(14);
+ RhoPi_twice(16); RhoPi_twice(18);
+ RhoPi_twice(20); RhoPi_twice(22);
+#undef RhoPi_twice
+ }
+
+ /* Chi */
+ for (y = 0; y <= 20; y += 5) {
+ uint64_t BC0, BC1, BC2, BC3, BC4;
+ BC0 = state[y + 0];
+ BC1 = state[y + 1];
+ BC2 = state[y + 2];
+ state[y + 0] = BC0 ^ ((~BC1) & BC2);
+ BC3 = state[y + 3];
+ state[y + 1] = BC1 ^ ((~BC2) & BC3);
+ BC4 = state[y + 4];
+ state[y + 2] = BC2 ^ ((~BC3) & BC4);
+ state[y + 3] = BC3 ^ ((~BC4) & BC0);
+ state[y + 4] = BC4 ^ ((~BC0) & BC1);
+ }
+
+ /* Iota */
+ state[0] ^= IOTA_CONST[round]
+ | (uint32_t)((IOTA_CONST_bit31 << round) & 0x80000000)
+ | (uint64_t)((IOTA_CONST_bit63 << round) & 0x80000000) << 32;
+ }
+
+ if (BB_BIG_ENDIAN) {
+ for (x = 0; x < 25; x++) {
+ state[x] = SWAP_LE64(state[x]);
+ }
+ }
+}
+
+void FAST_FUNC sha3_begin(sha3_ctx_t *ctx)
+{
+ memset(ctx, 0, sizeof(*ctx));
+}
+
+void FAST_FUNC sha3_hash(sha3_ctx_t *ctx, const void *buffer, size_t len)
+{
+#if SHA3_SMALL
+ const uint8_t *data = buffer;
+ unsigned bufpos = ctx->bytes_queued;
+
+ while (1) {
+ unsigned remaining = SHA3_IBLK_BYTES - bufpos;
+ if (remaining > len)
+ remaining = len;
+ len -= remaining;
+ /* XOR data into buffer */
+ while (remaining != 0) {
+ uint8_t *buf = (uint8_t*)ctx->state;
+ buf[bufpos] ^= *data++;
+ bufpos++;
+ remaining--;
+ }
+ /* Clever way to do "if (bufpos != N) break; ... ; bufpos = 0;" */
+ bufpos -= SHA3_IBLK_BYTES;
+ if (bufpos != 0)
+ break;
+ /* Buffer is filled up, process it */
+ sha3_process_block72(ctx->state);
+ /*bufpos = 0; - already is */
+ }
+ ctx->bytes_queued = bufpos + SHA3_IBLK_BYTES;
+#else
+ /* +50 bytes code size, but a bit faster because of long-sized XORs */
+ const uint8_t *data = buffer;
+ unsigned bufpos = ctx->bytes_queued;
+
+ /* If already data in queue, continue queuing first */
+ while (len != 0 && bufpos != 0) {
+ uint8_t *buf = (uint8_t*)ctx->state;
+ buf[bufpos] ^= *data++;
+ len--;
+ bufpos++;
+ if (bufpos == SHA3_IBLK_BYTES) {
+ bufpos = 0;
+ goto do_block;
+ }
+ }
+
+ /* Absorb complete blocks */
+ while (len >= SHA3_IBLK_BYTES) {
+ /* XOR data onto beginning of state[].
+ * We try to be efficient - operate one word at a time, not byte.
+ * Careful wrt unaligned access: can't just use "*(long*)data"!
+ */
+ unsigned count = SHA3_IBLK_BYTES / sizeof(long);
+ long *buf = (long*)ctx->state;
+ do {
+ long v;
+ move_from_unaligned_long(v, (long*)data);
+ *buf++ ^= v;
+ data += sizeof(long);
+ } while (--count);
+ len -= SHA3_IBLK_BYTES;
+ do_block:
+ sha3_process_block72(ctx->state);
+ }
+
+ /* Queue remaining data bytes */
+ while (len != 0) {
+ uint8_t *buf = (uint8_t*)ctx->state;
+ buf[bufpos] ^= *data++;
+ bufpos++;
+ len--;
+ }
+
+ ctx->bytes_queued = bufpos;
#endif
- memcpy(resbuf, &ctx->A, sizeof(ctx->A) * 4);
+}
+
+void FAST_FUNC sha3_end(sha3_ctx_t *ctx, void *resbuf)
+{
+ /* Padding */
+ uint8_t *buf = (uint8_t*)ctx->state;
+ buf[ctx->bytes_queued] ^= 1;
+ buf[SHA3_IBLK_BYTES - 1] ^= 0x80;
+
+ sha3_process_block72(ctx->state);
+
+ /* Output */
+ memcpy(resbuf, ctx->state, 64);
}