/*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#ifdef CONFIG_8xx
#include <mpc8xx.h>
#endif
#include <asm/mmu.h>
#endif
+#ifdef CONFIG_MP
+#include <asm/mp.h>
+#endif
+
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
+
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
extern int update_flash_size (int flash_size);
#endif
#include <bedbug/type.h>
#endif
-/*
- * Begin and End of memory area for malloc(), and current "brk"
- */
-static ulong mem_malloc_start = 0;
-static ulong mem_malloc_end = 0;
-static ulong mem_malloc_brk = 0;
-
/************************************************************************
* Utilities *
************************************************************************
*/
-/*
- * The Malloc area is immediately below the monitor copy in DRAM
- */
-static void mem_malloc_init (void)
-{
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
- mem_malloc_end = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
-#endif
- mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
- mem_malloc_brk = mem_malloc_start;
-
- memset ((void *) mem_malloc_start,
- 0,
- mem_malloc_end - mem_malloc_start);
-}
-
-void *sbrk (ptrdiff_t increment)
-{
- ulong old = mem_malloc_brk;
- ulong new = old + increment;
-
- if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
- return (NULL);
- }
- mem_malloc_brk = new;
- return ((void *) old);
-}
-
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
*/
init_fnc_t *init_sequence[] = {
-
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ probecpu,
+#endif
#if defined(CONFIG_BOARD_EARLY_INIT_F)
board_early_init_f,
#endif
-
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
get_clocks, /* get CPU and bus clocks (etc.) */
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
prt_8260_rsr,
prt_8260_clks,
#endif /* CONFIG_8260 */
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
prt_83xx_rsr,
#endif
checkcpu,
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX) && \
- !defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
+ !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
+ !defined(CONFIG_MPC86xx)
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
#endif
addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+ /*
+ * We need to make sure the location we intend to put secondary core
+ * boot code is reserved and not used by any part of u-boot
+ */
+ if (addr > determine_mp_bootpg()) {
+ addr = determine_mp_bootpg();
+ debug ("Reserving MP boot page to %08lx\n", addr);
+ }
+#endif
+
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
/* reserve kernel log buffer */
#if defined(CONFIG_MPC5xxx)
bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
#endif
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
bd->bi_immrbar = CONFIG_SYS_IMMR;
#endif
#if defined(CONFIG_MPC8220)
*/
void board_init_r (gd_t *id, ulong dest_addr)
{
- cmd_tbl_t *cmdtp;
- char *s, *e;
+ char *s;
bd_t *bd;
- int i;
- extern void malloc_bin_reloc (void);
-#ifndef CONFIG_ENV_IS_NOWHERE
- extern char * env_name_spec;
-#endif
+ ulong malloc_start;
#ifndef CONFIG_SYS_NO_FLASH
ulong flash_size;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-#if defined(CONFIG_RELOC_FIXUP_WORKS)
- gd->reloc_off = 0;
- mem_malloc_end = dest_addr;
-#else
- gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ /* The Malloc area is immediately below the monitor copy in DRAM */
+ malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ /*
+ * The gd->cpu pointer is set to an address in flash before relocation.
+ * We need to update it to point to the same CPU entry in RAM.
+ */
+ gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
#ifdef CONFIG_SERIAL_MULTI
monitor_flash_len = (ulong)&__init_end - dest_addr;
- /*
- * We have to relocate the command table manually
- */
- for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
- ulong addr;
- addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
-#if 0
- printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
- cmdtp->name, (ulong) (cmdtp->cmd), addr);
-#endif
- cmdtp->cmd =
- (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
-
- addr = (ulong)(cmdtp->name) + gd->reloc_off;
- cmdtp->name = (char *)addr;
-
- if (cmdtp->usage) {
- addr = (ulong)(cmdtp->usage) + gd->reloc_off;
- cmdtp->usage = (char *)addr;
- }
-#ifdef CONFIG_SYS_LONGHELP
- if (cmdtp->help) {
- addr = (ulong)(cmdtp->help) + gd->reloc_off;
- cmdtp->help = (char *)addr;
- }
-#endif
- }
- /* there are some other pointer constants we must deal with */
-#ifndef CONFIG_ENV_IS_NOWHERE
- env_name_spec += gd->reloc_off;
-#endif
-
WATCHDOG_RESET ();
#ifdef CONFIG_LOGBUFFER
#endif
#ifdef CONFIG_POST
post_output_backlog ();
- post_reloc ();
#endif
WATCHDOG_RESET();
-#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83XX)
+#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
icache_enable (); /* it's time to enable the instruction cache */
#endif
asm ("sync ; isync");
+ mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
+
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
WATCHDOG_RESET ();
- /* initialize malloc() area */
- mem_malloc_init ();
- malloc_bin_reloc ();
-
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f ();
mac_read_from_eeprom();
#endif
- s = getenv ("ethaddr");
- for (i = 0; i < 6; ++i) {
- bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
#ifdef CONFIG_HERMES
if ((gd->board_type >> 16) == 2)
bd->bi_ethspeed = gd->board_type & 0xFFFF;
bd->bi_ethspeed = 0xFFFF;
#endif
+#ifdef CONFIG_CMD_NET
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
#ifdef CONFIG_HAS_ETH1
- /* handle the 2nd ethernet address */
-
- s = getenv ("eth1addr");
-
- for (i = 0; i < 6; ++i) {
- bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
#endif
#ifdef CONFIG_HAS_ETH2
- /* handle the 3rd ethernet address */
-
- s = getenv ("eth2addr");
- for (i = 0; i < 6; ++i) {
- bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
#endif
-
#ifdef CONFIG_HAS_ETH3
- /* handle 4th ethernet address */
- s = getenv("eth3addr");
- for (i = 0; i < 6; ++i) {
- bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
#endif
-
#ifdef CONFIG_HAS_ETH4
- /* handle 5th ethernet address */
- s = getenv("eth4addr");
- for (i = 0; i < 6; ++i) {
- bd->bi_enet4addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
#endif
-
#ifdef CONFIG_HAS_ETH5
- /* handle 6th ethernet address */
- s = getenv("eth5addr");
- for (i = 0; i < 6; ++i) {
- bd->bi_enet5addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
#endif
+#endif /* CONFIG_CMD_NET */
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize devices */
- devices_init ();
+ /* Initialize stdio devices */
+ stdio_init ();
/* Initialize the jump table for applications */
jumptable_init ();
/* Initialize the console (after the relocation and devices init) */
console_init_r ();
-#if defined(CONFIG_CCM) || \
- defined(CONFIG_COGENT) || \
- defined(CONFIG_CPCI405) || \
- defined(CONFIG_EVB64260) || \
- defined(CONFIG_KUP4K) || \
- defined(CONFIG_KUP4X) || \
- defined(CONFIG_LWMON) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_SC3) || \
- defined(CONFIG_W7O) || \
- defined(CONFIG_MISC_INIT_R)
+#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
doc_init ();
#endif
+#ifdef CONFIG_BITBANGMII
+ bb_miiphy_init();
+#endif
#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
WATCHDOG_RESET ();
eth_initialize (bd);
#endif
-#if defined(CONFIG_CMD_NET) && ( \
- defined(CONFIG_CCM) || \
- defined(CONFIG_ELPT860) || \
- defined(CONFIG_EP8260) || \
- defined(CONFIG_IP860) || \
- defined(CONFIG_IVML24) || \
- defined(CONFIG_IVMS8) || \
- defined(CONFIG_MPC8260ADS) || \
- defined(CONFIG_MPC8266ADS) || \
- defined(CONFIG_MPC8560ADS) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_RPXSUPER) || \
- defined(CONFIG_STXGP3) || \
- defined(CONFIG_SPD823TS) || \
- defined(CONFIG_RESET_PHY_R) )
-
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
WATCHDOG_RESET ();
debug ("Reset Ethernet PHY\n");
reset_phy ();
for (;;);
}
-#ifdef CONFIG_MODEM_SUPPORT
-/* called from main loop (common/main.c) */
-/* 'inline' - We have to do it fast */
-static inline void mdm_readline(char *buf, int bufsiz)
-{
- char c;
- char *p;
- int n;
-
- n = 0;
- p = buf;
- for(;;) {
- c = serial_getc();
-
- /* dbg("(%c)", c); */
-
- switch(c) {
- case '\r':
- break;
- case '\n':
- *p = '\0';
- return;
-
- default:
- if(n++ > bufsiz) {
- *p = '\0';
- return; /* sanity check */
- }
- *p = c;
- p++;
- break;
- }
- }
-}
-
-extern void dbg(const char *fmt, ...);
-int mdm_init (void)
-{
- char env_str[16];
- char *init_str;
- int i;
- extern char console_buffer[];
- extern void enable_putc(void);
- extern int hwflow_onoff(int);
-
- enable_putc(); /* enable serial_putc() */
-
-#ifdef CONFIG_HWFLOW
- init_str = getenv("mdm_flow_control");
- if (init_str && (strcmp(init_str, "rts/cts") == 0))
- hwflow_onoff (1);
- else
- hwflow_onoff(-1);
-#endif
-
- for (i = 1;;i++) {
- sprintf(env_str, "mdm_init%d", i);
- if ((init_str = getenv(env_str)) != NULL) {
- serial_puts(init_str);
- serial_puts("\n");
- for(;;) {
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- dbg("ini%d: [%s]", i, console_buffer);
-
- if ((strcmp(console_buffer, "OK") == 0) ||
- (strcmp(console_buffer, "ERROR") == 0)) {
- dbg("ini%d: cmd done", i);
- break;
- } else /* in case we are originating call ... */
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini%d: connect", i);
- return 0;
- }
- }
- } else
- break; /* no init string - stop modem init */
-
- udelay(100000);
- }
-
- udelay(100000);
-
- /* final stage - wait for connect */
- for(;i > 1;) { /* if 'i' > 1 - wait for connection
- message from modem */
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- dbg("ini_f: [%s]", console_buffer);
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini_f: connected");
- return 0;
- }
- }
-
- return 0;
-}
-
-#endif
#if 0 /* We could use plain global data, but the resulting code is bigger */
/*