#include <command.h>
#include <malloc.h>
#include <devices.h>
+#include <timestamp.h>
#include <version.h>
#include <net.h>
#include <serial.h>
#endif
const char version_string[] =
- U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"CONFIG_IDENT_STRING;
+ U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
#ifdef CONFIG_DRIVER_CS8900
-extern void cs8900_get_enetaddr (uchar * addr);
+extern void cs8900_get_enetaddr (void);
#endif
#ifdef CONFIG_DRIVER_RTL8019
void mem_malloc_init (ulong dest_addr)
{
mem_malloc_start = dest_addr;
- mem_malloc_end = dest_addr + CFG_MALLOC_LEN;
+ mem_malloc_end = dest_addr + CONFIG_SYS_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
memset ((void *) mem_malloc_start, 0,
* but let's get it working (again) first...
*/
+#if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE)
+#define CONFIG_BAUDRATE 115200
+#endif
static int init_baudrate (void)
{
char tmp[64]; /* long enough for environment variables */
return (0);
}
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
static void display_flash_config (ulong size)
{
puts ("Flash: ");
print_size (size, "\n");
}
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
static int init_func_i2c (void)
{
puts ("I2C: ");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
puts ("ready\n");
return (0);
}
#endif
+#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI)
+#include <pci.h>
+static int arm_pci_init(void)
+{
+ pci_init();
+ return 0;
+}
+#endif /* CONFIG_CMD_PCI || CONFIG_PCI */
+
/*
* Breathe some life into the board...
*
init_fnc_t *init_sequence[] = {
cpu_init, /* basic cpu dependent setup */
+#if defined(CONFIG_ARCH_CPU_INIT)
+ arch_cpu_init, /* basic arch cpu dependent setup */
+#endif
board_init, /* basic board dependent setup */
interrupt_init, /* set up exceptions */
env_init, /* initialize environment */
init_func_i2c,
#endif
dram_init, /* configure available RAM banks */
+#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI)
+ arm_pci_init,
+#endif
display_dram_config,
NULL,
};
{
init_fnc_t **init_fnc_ptr;
char *s;
-#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
- ulong size;
-#endif
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
unsigned long addr;
#endif
/* Pointer is writable since we allocated a register for it */
- gd = (gd_t*)(_armboot_start - CFG_MALLOC_LEN - sizeof(gd_t));
+ gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
memset (gd->bd, 0, sizeof (bd_t));
+ gd->flags |= GD_FLG_RELOC;
+
monitor_flash_len = _bss_start - _armboot_start;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
}
}
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
- size = flash_init ();
- display_flash_config (size);
-#endif /* CFG_NO_FLASH */
+ display_flash_config (flash_init ());
+#endif /* CONFIG_SYS_NO_FLASH */
#ifdef CONFIG_VFD
# ifndef PAGE_SIZE
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- size = vfd_setmem (addr);
+ vfd_setmem (addr);
gd->fb_base = addr;
#endif /* CONFIG_VFD */
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- size = lcd_setmem (addr);
+ lcd_setmem (addr);
gd->fb_base = addr;
}
#endif /* CONFIG_LCD */
/* armboot_start is defined in the board-specific linker script */
- mem_malloc_init (_armboot_start - CFG_MALLOC_LEN);
+ mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
#if defined(CONFIG_CMD_NAND)
puts ("NAND: ");
/* IP Address */
gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- /* MAC Address */
- {
- int i;
- ulong reg;
- char *s, *e;
- char tmp[64];
-
- i = getenv_r ("ethaddr", tmp, sizeof (tmp));
- s = (i > 0) ? tmp : NULL;
-
- for (reg = 0; reg < 6; ++reg) {
- gd->bd->bi_enetaddr[reg] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
-
-#ifdef CONFIG_HAS_ETH1
- i = getenv_r ("eth1addr", tmp, sizeof (tmp));
- s = (i > 0) ? tmp : NULL;
-
- for (reg = 0; reg < 6; ++reg) {
- gd->bd->bi_enet1addr[reg] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
-#endif
- }
-
devices_init (); /* get the devices list going. */
-#ifdef CONFIG_CMC_PU2
- load_sernum_ethaddr ();
-#endif /* CONFIG_CMC_PU2 */
-
jumptable_init ();
+#if defined(CONFIG_API)
+ /* Initialize API */
+ api_init ();
+#endif
+
console_init_r (); /* fully init console as a device */
#if defined(CONFIG_MISC_INIT_R)
/* Perform network card initialisation if necessary */
#ifdef CONFIG_DRIVER_TI_EMAC
+ /* XXX: this needs to be moved to board init */
extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
if (getenv ("ethaddr")) {
- davinci_eth_set_mac_addr(gd->bd->bi_enetaddr);
+ uchar enetaddr[6];
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ davinci_eth_set_mac_addr(enetaddr);
}
#endif
#ifdef CONFIG_DRIVER_CS8900
- cs8900_get_enetaddr (gd->bd->bi_enetaddr);
+ /* XXX: this needs to be moved to board init */
+ cs8900_get_enetaddr ();
#endif
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
+ /* XXX: this needs to be moved to board init */
if (getenv ("ethaddr")) {
- smc_set_mac_addr(gd->bd->bi_enetaddr);
+ uchar enetaddr[6];
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ smc_set_mac_addr(enetaddr);
}
#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
serial_puts(init_str);
serial_puts("\n");
for(;;) {
- mdm_readline(console_buffer, CFG_CBSIZE);
+ mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
dbg("ini%d: [%s]", i, console_buffer);
if ((strcmp(console_buffer, "OK") == 0) ||
/* final stage - wait for connect */
for(;i > 1;) { /* if 'i' > 1 - wait for connection
message from modem */
- mdm_readline(console_buffer, CFG_CBSIZE);
+ mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
dbg("ini_f: [%s]", console_buffer);
if (strncmp(console_buffer, "CONNECT", 7) == 0) {
dbg("ini_f: connected");