#include <linux/serial.h> /* for serial_struct */
#include <sys/vt.h> /* for vt_stat */
#include <sys/ioctl.h>
+#include <linux/version.h>
#ifdef BB_SYSLOGD
#include <sys/syslog.h>
#endif
+#if ! defined BB_FEATURE_USE_PROCFS
+#error Sorry, I depend on the /proc filesystem right now.
+#endif
+
+#ifndef KERNEL_VERSION
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#endif
+
+
#define VT_PRIMARY "/dev/tty1" /* Primary virtual console */
#define VT_SECONDARY "/dev/tty2" /* Virtual console */
#define VT_LOG "/dev/tty3" /* Virtual console */
#define SERIAL_CON0 "/dev/ttyS0" /* Primary serial console */
#define SERIAL_CON1 "/dev/ttyS1" /* Serial console */
+#define GETTY "/sbin/getty" /* Default location of getty */
#define SHELL "/bin/sh" /* Default shell */
-#define INITSCRIPT "/etc/init.d/rcS" /* Initscript. */
+#ifndef BB_INIT_SCRIPT
+#define BB_INIT_SCRIPT "/etc/init.d/rcS" /* Initscript. */
+#endif
#define LOG 0x1
#define CONSOLE 0x2
void set_term( int fd)
{
struct termios tty;
-#if 0
- static const char control_characters[] = {
- '\003', '\034', '\177', '\030', '\004', '\0',
- '\1', '\0', '\021', '\023', '\032', '\0', '\022',
- '\017', '\027', '\026', '\0'
- };
-#else
static const char control_characters[] = {
'\003', '\034', '\177', '\025', '\004', '\0',
'\1', '\0', '\021', '\023', '\032', '\0', '\022',
'\017', '\027', '\026', '\0'
};
-#endif
tcgetattr(fd, &tty);
}
/* Log the process name and args */
- message(LOG, "Starting pid %d, console %s: '", getpid(), terminal);
- while ( *cmd) message(LOG, "%s ", *cmd++);
- message(LOG, "'\r\n");
+ message(LOG|CONSOLE, "Starting pid %d, console %s: '", getpid(), terminal);
+ while ( *cmd) message(LOG|CONSOLE, "%s ", *cmd++);
+ message(LOG|CONSOLE, "'\r\n");
/* Now run it. The new program will take over this PID,
* so nothing further in init.c should be run. */
static void shutdown_system(void)
{
const char* const swap_off_cmd[] = { "swapoff", "swapoff", "-a", 0};
- const char* const umount_cmd[] = { "umount", "umount", "-a", "-n", 0};
+ const char* const umount_cmd[] = { "umount", "umount", "-a", 0};
#ifndef DEBUG_INIT
/* Allow Ctrl-Alt-Del to reboot system. */
"The system is halted. Press CTRL-ALT-DEL or turn off power\r\n");
sync();
#ifndef DEBUG_INIT
- while (1) sleep(1);
- reboot(RB_HALT_SYSTEM);
- //reboot(RB_POWER_OFF);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ if (sig == SIGUSR2)
+ reboot(RB_POWER_OFF);
+ else
+#endif
+ reboot(RB_HALT_SYSTEM);
#endif
exit(0);
}
shutdown_system();
message(CONSOLE, "Please stand by while rebooting the system.\r\n");
sync();
- while (1) sleep(1);
#ifndef DEBUG_INIT
reboot(RB_AUTOBOOT);
#endif
extern int init_main(int argc, char **argv)
{
- int run_rc = TRUE;
- int wait_for_enter = TRUE;
+ int run_rc = FALSE;
+ int single = FALSE;
+ int wait_for_enter_tty1 = TRUE;
+ int wait_for_enter_tty2 = TRUE;
pid_t pid1 = 0;
pid_t pid2 = 0;
struct stat statbuf;
- const char* const rc_script_command[] = { INITSCRIPT, INITSCRIPT, 0};
+ char which_vt1[30];
+ char which_vt2[30];
+ const char* const rc_script_command[] = { BB_INIT_SCRIPT, BB_INIT_SCRIPT, 0};
+ const char* const getty1_command[] = { GETTY, GETTY, "38400", which_vt1, 0};
+ const char* const getty2_command[] = { GETTY, GETTY, "38400", which_vt2, 0};
const char* const shell_command[] = { SHELL, "-" SHELL, 0};
- const char* const* tty0_command = shell_command;
const char* const* tty1_command = shell_command;
+ const char* const* tty2_command = shell_command;
#ifdef BB_INIT_CMD_IF_RC_SCRIPT_EXITS
const char* const rc_exit_command[] = { "BB_INIT_CMD_IF_RC_SCRIPT_EXITS",
"BB_INIT_CMD_IF_RC_SCRIPT_EXITS", 0 };
}
#endif
- /* Check if we are supposed to be in single user mode */
- if ( argc > 1 && (!strcmp(argv[1], "single") ||
- !strcmp(argv[1], "-s") || !strcmp(argv[1], "1"))) {
- run_rc = FALSE;
- }
-
-
/* Set up sig handlers -- be sure to
* clear all of these in run() */
signal(SIGUSR1, halt_signal);
/* Make sure there is enough memory to do something useful. */
check_memory();
+ /* Check if we are supposed to be in single user mode */
+ if ( argc > 1 && (!strcmp(argv[1], "single") ||
+ !strcmp(argv[1], "-s") || !strcmp(argv[1], "1"))) {
+ single = TRUE;
+ tty1_command = shell_command;
+ tty2_command = shell_command;
+ }
/* Make sure an init script exists before trying to run it */
- if (run_rc == TRUE && stat(INITSCRIPT, &statbuf)==0) {
- wait_for_enter = FALSE;
- tty0_command = rc_script_command;
+ if (single==FALSE && stat(BB_INIT_SCRIPT, &statbuf)==0) {
+ run_rc = TRUE;
+ wait_for_enter_tty1 = FALSE;
+ tty1_command = rc_script_command;
}
+
+ /* Make sure /sbin/getty exists before trying to run it */
+ if (stat(GETTY, &statbuf)==0) {
+ char* where;
+ /* First do tty2 */
+ wait_for_enter_tty2 = FALSE;
+ where = strrchr( second_console, '/');
+ if ( where != NULL) {
+ where++;
+ strncpy( which_vt2, where, sizeof(which_vt2));
+ }
+ tty2_command = getty2_command;
+
+ /* Check on hooking a getty onto tty1 */
+ if (run_rc == FALSE && single==FALSE) {
+ wait_for_enter_tty1 = FALSE;
+ where = strrchr( console, '/');
+ if ( where != NULL) {
+ where++;
+ strncpy( which_vt1, where, sizeof(which_vt1));
+ }
+ tty1_command = getty1_command;
+ }
+ }
+
-
- /* Ok, now launch the rc script and/or prepare to
- * start up some VTs if somebody hits enter...
- */
+ /* Ok, now launch the tty1_command and tty2_command */
for (;;) {
pid_t wpid;
int status;
- if (pid1 == 0 && tty0_command) {
- pid1 = run(tty0_command, console, wait_for_enter);
+ if (pid1 == 0 && tty1_command) {
+ pid1 = run(tty1_command, console, wait_for_enter_tty1);
}
- if (pid2 == 0 && tty1_command && second_console) {
- pid2 = run(tty1_command, second_console, TRUE);
+#ifdef BB_FEATURE_INIT_SECOND_CONSOLE
+ if (pid2 == 0 && tty2_command && second_console) {
+ pid2 = run(tty2_command, second_console, wait_for_enter_tty2);
}
+#endif
wpid = wait(&status);
if (wpid > 0 ) {
message(LOG, "pid %d exited, status=%x.\n", wpid, status);
else {
pid1 = 0;
run_rc=FALSE;
- wait_for_enter=TRUE;
- tty0_command=rc_exit_command;
+ wait_for_enter_tty1=TRUE;
+ tty1_command=rc_exit_command;
}
#endif
}
+#ifdef BB_FEATURE_INIT_SECOND_CONSOLE
if (wpid == pid2) {
pid2 = 0;
}
+#endif
sleep(1);
}
}
projects / oweals / busybox.git / blobdiff