* Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
* Adjusted by so many folks, it's impossible to keep track.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
+ * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
/* Turn this on to disable all the dangerous
#include <termios.h>
#include <unistd.h>
#include <limits.h>
-#include <sys/fcntl.h>
+#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/wait.h>
#endif
+#ifdef CONFIG_SELINUX
+# include <selinux/selinux.h>
+#endif /* CONFIG_SELINUX */
+
+
#define INIT_BUFFS_SIZE 256
/* From <linux/vt.h> */
unsigned short v_signal; /* signal to send */
unsigned short v_state; /* vt bitmask */
};
-static const int VT_GETSTATE = 0x5603; /* get global vt state info */
+enum { VT_GETSTATE = 0x5603 }; /* get global vt state info */
/* From <linux/serial.h> */
struct serial_struct {
static char *log_console = VC_5;
#endif
static sig_atomic_t got_cont = 0;
-static const int LOG = 0x1;
-static const int CONSOLE = 0x2;
+
+enum {
+ LOG = 0x1,
+ CONSOLE = 0x2,
#if defined CONFIG_FEATURE_EXTRA_QUIET
-static const int MAYBE_CONSOLE = 0x0;
+ MAYBE_CONSOLE = 0x0,
#else
-#define MAYBE_CONSOLE CONSOLE
+ MAYBE_CONSOLE = CONSOLE,
#endif
-#ifndef RB_HALT_SYSTEM
-static const int RB_HALT_SYSTEM = 0xcdef0123;
-static const int RB_ENABLE_CAD = 0x89abcdef;
-static const int RB_DISABLE_CAD = 0;
-#define RB_POWER_OFF 0x4321fedc
-static const int RB_AUTOBOOT = 0x01234567;
+#ifndef RB_HALT_SYSTEM
+ RB_HALT_SYSTEM = 0xcdef0123,
+ RB_ENABLE_CAD = 0x89abcdef,
+ RB_DISABLE_CAD = 0,
+ RB_POWER_OFF = 0x4321fedc,
+ RB_AUTOBOOT = 0x01234567,
#endif
+};
static const char * const environment[] = {
"HOME=/",
/* Print a message to the specified device.
* Device may be bitwise-or'd from LOG | CONSOLE */
#ifndef DEBUG_INIT
-static inline void messageD(int device, const char *fmt, ...)
+static inline void messageD(int ATTRIBUTE_UNUSED device,
+ const char ATTRIBUTE_UNUSED *fmt, ...)
{
}
#else
if (device & LOG) {
/* don`t out "\r\n" */
openlog(bb_applet_name, 0, LOG_DAEMON);
- syslog(LOG_INFO, "%s", msg);
+ syslog(LOG_INFO, "%s", msg + 1);
closelog();
}
tcsetattr(fd, TCSANOW, &tty);
}
-#ifdef CONFIG_FEATURE_INIT_SWAPON
-/* How much memory does this machine have?
- Units are kBytes to avoid overflow on 4GB machines */
-static unsigned int check_free_memory(void)
-{
- struct sysinfo info;
- unsigned int result, u, s = 10;
-
- if (sysinfo(&info) != 0) {
- bb_perror_msg("Error checking free memory");
- return -1;
- }
-
- /* Kernels 2.0.x and 2.2.x return info.mem_unit==0 with values in bytes.
- * Kernels 2.4.0 return info.mem_unit in bytes. */
- u = info.mem_unit;
- if (u == 0)
- u = 1;
- while ((u & 1) == 0 && s > 0) {
- u >>= 1;
- s--;
- }
- result = (info.totalram >> s) + (info.totalswap >> s);
- if (((unsigned long long)result * (unsigned long long)u) > UINT_MAX) {
- return(UINT_MAX);
- } else {
- return(result * u);
- }
-}
-#endif /* CONFIG_FEATURE_INIT_SWAPON */
-
static void console_init(void)
{
int fd;
#ifndef CONFIG_SYSLOGD
log_console =
#endif
- safe_strncpy(console, "/dev/null", sizeof(console));
+ safe_strncpy(console, bb_dev_null, sizeof(console));
} else {
s = getenv("TERM");
/* check for serial console */
break;
}
/* FIXME handle other errors */
- }
+ }
/* See if stealing the controlling tty back is necessary */
pgrp = tcgetpgrp(0);
cmd[0][0] = '-';
strcpy(cmd[0] + 1, s);
}
+#ifdef CONFIG_FEATURE_INIT_SCTTY
+ /* Establish this process as session leader and
+ * (attempt) to make the tty (if any) a controlling tty.
+ */
+ (void) setsid();
+ (void) ioctl(0, TIOCSCTTY, 0/*don't steal it*/);
+#endif
}
#if !defined(__UCLIBC__) || defined(__ARCH_HAS_MMU__)
for (a = init_action_list; a; a = tmp) {
tmp = a->next;
if (a->action == action) {
- if (a->action & (SYSINIT | WAIT | CTRLALTDEL | SHUTDOWN | RESTART)) {
+ if (access(a->terminal, R_OK | W_OK)) {
+ delete_init_action(a);
+ } else if (a->action & (SYSINIT | WAIT | CTRLALTDEL | SHUTDOWN | RESTART)) {
waitfor(a);
delete_init_action(a);
} else if (a->action & ONCE) {
sync();
}
-static void exec_signal(int sig)
+static void exec_signal(int sig ATTRIBUTE_UNUSED)
{
struct init_action *a, *tmp;
sigset_t unblock_signals;
}
}
-static void halt_signal(int sig)
+static void halt_signal(int sig ATTRIBUTE_UNUSED)
{
shutdown_system();
- message(CONSOLE | LOG,
-#if #cpu(s390)
- /* Seems the s390 console is Wierd(tm). */
- "The system is halted. You may reboot now."
-#else
- "The system is halted. Press Reset or turn off power"
-#endif
- );
+ message(CONSOLE | LOG, "The system is halted.");
sync();
/* allow time for last message to reach serial console */
loop_forever();
}
-static void reboot_signal(int sig)
+static void reboot_signal(int sig ATTRIBUTE_UNUSED)
{
shutdown_system();
message(CONSOLE | LOG, "Please stand by while rebooting the system.");
loop_forever();
}
-static void ctrlaltdel_signal(int sig)
+static void ctrlaltdel_signal(int sig ATTRIBUTE_UNUSED)
{
run_actions(CTRLALTDEL);
}
/* The SIGSTOP & SIGTSTP handler */
-static void stop_handler(int sig)
+static void stop_handler(int sig ATTRIBUTE_UNUSED)
{
int saved_errno = errno;
}
/* The SIGCONT handler */
-static void cont_handler(int sig)
+static void cont_handler(int sig ATTRIBUTE_UNUSED)
{
got_cont = 1;
}
if (*cons == '\0')
cons = console;
- /* do not run entries if console device is not available */
- if (access(cons, R_OK | W_OK))
- return;
- if (strcmp(cons, "/dev/null") == 0 && (action & ASKFIRST))
+ if (strcmp(cons, bb_dev_null) == 0 && (action & ASKFIRST))
return;
new_action = calloc((size_t) (1), sizeof(struct init_action));
}
}
-#ifdef CONFIG_FEATURE_INIT_SWAPON
-/* Make sure there is enough memory to do something useful. *
- * Calls "swapon -a" if needed so be sure /etc/fstab is present... */
-static void check_memory(void)
-{
- struct stat statBuf;
-
- if (check_free_memory() > 1000)
- return;
-
-#if !defined(__UCLIBC__) || defined(__ARCH_HAS_MMU__)
- if (stat("/etc/fstab", &statBuf) == 0) {
- /* swapon -a requires /proc typically */
- new_init_action(SYSINIT, "/bin/mount -t proc proc /proc", "");
- /* Try to turn on swap */
- new_init_action(SYSINIT, "/sbin/swapon -a", "");
- run_actions(SYSINIT); /* wait and removing */
- if (check_free_memory() < 1000)
- goto goodnight;
- } else
- goto goodnight;
- return;
-#endif
-
- goodnight:
- message(CONSOLE, "Sorry, your computer does not have enough memory.");
- loop_forever();
-}
-#else
-# define check_memory()
-#endif /* CONFIG_FEATURE_INIT_SWAPON */
-
/* NOTE that if CONFIG_FEATURE_USE_INITTAB is NOT defined,
* then parse_inittab() simply adds in some default
* actions(i.e., runs INIT_SCRIPT and then starts a pair
new_init_action(CTRLALTDEL, "/sbin/reboot", "");
/* Umount all filesystems on halt/reboot */
new_init_action(SHUTDOWN, "/bin/umount -a -r", "");
-#if !defined(__UCLIBC__) || defined(__ARCH_HAS_MMU__)
/* Swapoff on halt/reboot */
- new_init_action(SHUTDOWN, "/sbin/swapoff -a", "");
-#endif
+ if(ENABLE_SWAPONOFF) new_init_action(SHUTDOWN, "/sbin/swapoff -a", "");
/* Prepare to restart init when a HUP is received */
new_init_action(RESTART, "/sbin/init", "");
/* Askfirst shell on tty1-4 */
}
#ifdef CONFIG_FEATURE_USE_INITTAB
-static void reload_signal(int sig)
+static void reload_signal(int sig ATTRIBUTE_UNUSED)
{
struct init_action *a, *tmp;
}
#endif /* CONFIG_FEATURE_USE_INITTAB */
-extern int init_main(int argc, char **argv)
+int init_main(int argc, char **argv)
{
struct init_action *a;
pid_t wpid;
int status;
if (argc > 1 && !strcmp(argv[1], "-q")) {
- return kill_init(SIGHUP);
+ return kill(1,SIGHUP);
}
#ifndef DEBUG_INIT
/* Expect to be invoked as init with PID=1 or be invoked as linuxrc */
- if (getpid() != 1
-#ifdef CONFIG_FEATURE_INITRD
- && strstr(bb_applet_name, "linuxrc") == NULL
-#endif
- ) {
+ if (getpid() != 1 &&
+ (!ENABLE_FEATURE_INITRD || !strstr(bb_applet_name, "linuxrc")))
+ {
bb_show_usage();
}
/* Set up sig handlers -- be sure to
message(MAYBE_CONSOLE | LOG, "init started: %s", bb_msg_full_version);
/* Make sure there is enough memory to do something useful. */
- check_memory();
+ if (ENABLE_SWAPONOFF) {
+ struct sysinfo info;
+
+ if (!sysinfo(&info) &&
+ (info.mem_unit ? : 1) * (long long)info.totalram < MEGABYTE)
+ {
+ message(CONSOLE,"Low memory: forcing swapon.");
+ /* swapon -a requires /proc typically */
+ new_init_action(SYSINIT, "/bin/mount -t proc proc /proc", "");
+ /* Try to turn on swap */
+ new_init_action(SYSINIT, "/sbin/swapon -a", "");
+ run_actions(SYSINIT); /* wait and removing */
+ }
+ }
/* Check if we are supposed to be in single user mode */
if (argc > 1 && (!strcmp(argv[1], "single") ||
parse_inittab();
}
+#ifdef CONFIG_SELINUX
+ if (getenv("SELINUX_INIT") == NULL) {
+ int enforce = 0;
+
+ putenv("SELINUX_INIT=YES");
+ if (selinux_init_load_policy(&enforce) == 0) {
+ execv(argv[0], argv);
+ } else if (enforce > 0) {
+ /* SELinux in enforcing mode but load_policy failed */
+ /* At this point, we probably can't open /dev/console, so log() won't work */
+ message(CONSOLE,"Unable to load SELinux Policy. Machine is in enforcing mode. Halting now.");
+ exit(1);
+ }
+ }
+#endif /* CONFIG_SELINUX */
+
/* Make the command line just say "init" -- thats all, nothing else */
fixup_argv(argc, argv, "init");