"\t-v\t\tverbosely list files processed"
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target"
+ "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
#define arping_full_usage \
"Ping hosts by ARP requests/replies.\n\n" \
"Options:\n" \
"\t-A\t\tARP answer mode, update your neighbours\n" \
"\t-c count\tStop after sending count ARP request packets\n" \
"\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
- "\t-I device\tOutgoing interface name, default is eth0\n" \
+ "\t-i device\tOutgoing interface name, default is eth0\n" \
"\t-s sender\tSet specific sender IP address\n" \
"\ttarget\t\tTarget IP address of ARP request"
#define bbconfig_trivial_usage \
""
#define bbconfig_full_usage \
- "Print the config file which built busybox\n"
+ "Print the config file which built busybox"
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
"\nOptions:\n" \
"\t-R\t\tOutputs RFC-822 compliant date string\n" \
"\t-d STRING\tDisplays time described by STRING, not `now'\n" \
- USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \
- "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
- "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
- "\t\t\ttime to the indicated precision\n") \
+ USAGE_DATE_ISOFMT( \
+ "\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \
+ "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
+ "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
+ "\t\t\ttime to the indicated precision\n" \
+ "\t-D hint\t\tUse 'hint' as date format, via strptime()\n" \
+ ) \
"\t-s\t\tSets time described by STRING\n" \
"\t-r FILE\t\tDisplays the last modification time of FILE\n" \
"\t-u\t\tPrints or sets Coordinated Universal Time"
"Filesystem 1k-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n"
+#define diff_trivial_usage \
+ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
+#define diff_full_usage \
+ "Compare files line by line and output the differences between them.\n" \
+ "This diff implementation only supports unified diffs.\n\n" \
+ "Options:\n" \
+ "\t-a\tTreat all files as text\n" \
+ "\t-b\tIgnore changes in the amount of whitespace\n" \
+ "\t-d\tTry hard to find a smaller set of changes\n" \
+ "\t-i\tIgnore case differences\n" \
+ "\t-L\tUse LABEL instead of the filename in the unified header\n" \
+ "\t-N\tTreat absent files as empty\n" \
+ "\t-q\tOutput only whether files differ\n" \
+ "\t-r\tRecursively compare any subdirectories\n" \
+ "\t-S\tStart with FILE when comparing directories\n" \
+ "\t-T\tMake tabs line up by prefixing a tab when necessary\n" \
+ "\t-s\tReport when two files are the same\n" \
+ "\t-t\tExpand tabs to spaces in output\n" \
+ "\t-U\tOutput LINES lines of context\n" \
+ "\t-w\tIgnore all whitespace\n"
+
#define dirname_trivial_usage \
"FILENAME"
#define dirname_full_usage \
#define e2fsck_trivial_usage \
"[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
"[-I inode_buffer_blocks] [-P process_inode_size] " \
- "[-l|-L bad_blocks_file] [-C fd] [-j ext-journal] " \
+ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage \
"Check a Linux ext2/ext3 file system.\n\n" \
"Options:\n" \
"\t-b\t\tSend wake-up packet to the broadcast address\n" \
"\t-i iface\tUse interface ifname instead of the default \"eth0\"\n" \
- "\t-p pass\tAppend the four or six byte password PW to the packet\n"
+ "\t-p pass\tAppend the four or six byte password PW to the packet"
#define expr_trivial_usage \
"EXPRESSION"
"\t-s Don't print or kill anything.\n" \
"\t-4 When using port/proto only search IPv4 space\n" \
"\t-6 When using port/proto only search IPv6 space\n" \
- "\t-SIGNAL When used with -k, this signal will be used to kill\n"
+ "\t-SIGNAL When used with -k, this signal will be used to kill"
+
#define getopt_trivial_usage \
"[OPTIONS]..."
#define getopt_full_usage \
"Options:\n" \
"\t-d\t\tdelay interval for halting\n" \
"\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce halt (don't go through init)\n"
+ "\t-f\t\tforce halt (don't go through init)"
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
#define USAGE_HDPARM_IDENT(a) a
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
"\t\t[ dev STRING ] [ to PREFIX ] }"
#define ipaddr_full_usage \
- "ipaddr {add|del} IFADDR dev STRING\n" \
+ "ipaddr {add|delete} IFADDR dev STRING\n" \
"ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
"\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
"\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
"to remove a segment by shmid value.\n" \
"\t-m | -M\tRemove the memory segment after the last detatch\n" \
"\t-q | -Q\tRemove the message queue\n" \
- "\t-s | -S\tRemove the semaphore\n"
+ "\t-s | -S\tRemove the semaphore"
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tclup]]"
"\t-p\tpid\n" \
"\t-s\tcreator\n" \
"\t-a\tlimits\n" \
- "\t-i\tsummary\n"
+ "\t-i\tsummary"
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
"\t\tfile\n" \
"\t-~\tSuppress ~s displayed when input past the end of the file is\n" \
"\t\treached.\n" \
- "\t-h, -?\tDisplay this help message\n"
+ "\t-h, -?\tDisplay this help message"
+
+#define setarch_trivial_usage \
+ "<personality> <program> [args ...]"
+#define setarch_full_usage \
+ "Personality may be:\n" \
+ "\tlinux32\tSet 32bit uname emulation\n" \
+ "\tlinux64\tSet 64bit uname emulation"
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
"\t-q\tQuiet output\n" \
"\t-r\tRemove module (stacks) or do autoclean\n" \
"\t-s\tReport via syslog instead of stderr\n" \
- "\t-v\tVerbose output\n\n"
+ "\t-v\tVerbose output"
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
"Options:\n" \
"\t-d\t\tdelay interval for halting\n" \
"\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce power off (don't go through init)\n"
+ "\t-f\t\tforce power off (don't go through init)"
#define printenv_trivial_usage \
"[VARIABLES...]"
"Options:\n" \
"\t-d\t\tdelay interval for rebooting\n" \
"\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce reboot (don't go through init)\n"
+ "\t-f\t\tforce reboot (don't go through init)"
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
"\t-a ARG\tPass ARG as an argument for every program invoked\n" \
"\t-u MASK\tSet the umask to MASK before executing every program"
-#if BB_APPLET_RUNLEVEL
#define runlevel_trivial_usage \
"[utmp]"
#define runlevel_full_usage \
#define runlevel_example_usage \
"$ runlevel /var/run/utmp\n" \
"N 2"
-#endif
#define rx_trivial_usage \
"FILE"
#define setkeycodes_example_usage \
"$ setkeycodes e030 127\n"
+#define setlogcons_trivial_usage \
+ "N"
+#define setlogcons_full_usage \
+ "Redirects the kernel output to console N (0 for current)."
+
#define setsid_trivial_usage \
"program [arg ...]"
#define setsid_full_usage \
USAGE_SORT_BIG("\t-s\tstable (don't sort ties alphabetically)\n") \
"\t-u\tsuppress duplicate lines" \
USAGE_SORT_BIG("\n\t-z\tinput terminated by nulls, not newlines\n") \
- USAGE_SORT_BIG("\t-mST\tignored for GNU compatability") \
+ USAGE_SORT_BIG("\t-mST\tignored for GNU compatibility") \
""
#define sort_example_usage \
"$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
"[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
"[-T last-check-time] [-U UUID] device"
#define tune2fs_full_usage \
- "Adjust filesystem options on ext[23] filesystems.\n\n"
+ "Adjust filesystem options on ext[23] filesystems."
#define udhcpc_trivial_usage \
"[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
"\t-f foreground mode\n" \
"\t-q quit after address (no daemon)\n" \
"\t-r 169.254.x.x request this address first\n" \
- "\t-v verbose; show version\n"
+ "\t-v verbose; show version"
#endif /* __BB_USAGE_H__ */
projects / oweals / busybox.git / blobdiff