#define __BB_USAGE_H__
#define addgroup_trivial_usage \
- "[-g GID] group_name [user_name]"
+ "[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name"
#define addgroup_full_usage \
- "Add a group to the system" \
+ "Add a group to the system"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \
"\n\nOptions:\n" \
- " -g GID specify gid"
+ " -g GID Specify gid"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
" -g GECOS Assign gecos field GECOS\n" \
" -s SHELL Assign login shell SHELL\n" \
" -G Add the user to existing group GROUP\n" \
- " -S create a system user (ignored)\n" \
+ " -S Create a system user (ignored)\n" \
" -D Do not assign a password (logins still possible via ssh)\n" \
" -H Do not create the home directory"
"Read and optionally set system timebase parameters.\n" \
"See adjtimex(2)." \
"\n\nOptions:\n" \
- " -q quiet mode - do not print\n" \
- " -o offset time offset, microseconds\n" \
- " -f frequency frequency adjust, integer kernel units (65536 is 1ppm)\n" \
+ " -q Quiet\n" \
+ " -o offset Time offset, microseconds\n" \
+ " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
" (positive values make the system clock run fast)\n" \
- " -t tick microseconds per tick, usually 10000\n" \
+ " -t tick Microseconds per tick, usually 10000\n" \
" -p timeconstant"
#define ar_trivial_usage \
#define ar_full_usage \
"Extract or list FILES from an ar archive" \
"\n\nOptions:\n" \
- " -o preserve original dates\n" \
- " -p extract to stdout\n" \
- " -t list\n" \
- " -x extract\n" \
- " -v verbosely list files processed"
+ " -o Preserve original dates\n" \
+ " -p Extract to stdout\n" \
+ " -t List\n" \
+ " -x Extract\n" \
+ " -v Verbose"
+
+#define arp_trivial_usage \
+ "\n" \
+ "[-vn] [-H type] [-i if] -a [hostname]\n" \
+ "[-v] [-i if] -d hostname [pub]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
+ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
+#define arp_full_usage \
+ "Manipulate the system ARP cache" \
+ "\n\nOptions:" \
+ "\n -a Display (all) hosts" \
+ "\n -s Set a new ARP entry" \
+ "\n -d Delete a specified entry" \
+ "\n -v Verbose" \
+ "\n -n Don't resolve names" \
+ "\n -i if Specify network interface (e.g. eth0)" \
+ "\n -D Read <hwaddr> from given device" \
+ "\n -A, -p Specify protocol family" \
+ "\n -H hwtype Specify hardware address type"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
"Ping hosts by ARP requests/replies" \
"\n\nOptions:\n" \
" -f Quit on first ARP reply\n" \
- " -q Be quiet\n" \
+ " -q Quiet\n" \
" -b Keep broadcasting, don't go unicast\n" \
" -D Duplicated address detection mode\n" \
" -U Unsolicited ARP mode, update your neighbours\n" \
"[OPTION]... [program-text] [FILE ...]"
#define awk_full_usage \
"Options:\n" \
- " -v var=val assign value 'val' to variable 'var'\n" \
- " -F sep use 'sep' as field separator\n" \
- " -f progname read program source from file 'progname'"
+ " -v var=val Assign value 'val' to variable 'var'\n" \
+ " -F sep Use 'sep' as field separator\n" \
+ " -f progname Read program source from file 'progname'"
#define basename_trivial_usage \
"FILE [SUFFIX]"
"[-jy] [[month] year]"
#define cal_full_usage \
"Display a calendar" \
- "\n\nOptions:\n" \
- " -j Use julian dates\n" \
- " -y Display the entire year"
+ "\n\nOptions:" \
+ "\n -j Use julian dates" \
+ "\n -y Display the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
"Concatenate FILE(s) and print them to stdout" \
- "\n\nOptions:\n" \
- " -u ignored since unbuffered i/o is always used"
+ "\n\nOptions:" \
+ "\n -u Ignored since unbuffered i/o is always used"
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
"\n\nOptions:\n" \
" -e End each line with $\n" \
" -t Show tabs as ^I\n" \
- " -v Don't use ^x or M-x escapes."
+ " -v Don't use ^x or M-x escapes"
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
"Change file attributes on an ext2 fs\n\n" \
"Modifiers:\n" \
- " - remove attributes\n" \
- " + add attributes\n" \
- " = set attributes\n" \
+ " - Remove attributes\n" \
+ " + Add attributes\n" \
+ " = Set attributes\n" \
"Attributes:\n" \
- " A don't track atime\n" \
- " a append mode only\n" \
- " c enable compress\n" \
- " D write dir contents synchronously\n" \
- " d do not backup with dump\n" \
- " i cannot be modified (immutable)\n" \
- " j write all data to journal first\n" \
- " s zero disk storage when deleted\n" \
- " S write file contents synchronously\n" \
- " t disable tail-merging of partial blocks with other files\n" \
- " u allow file to be undeleted\n" \
- " Options:\n" \
- " -R recursively list subdirectories\n" \
- " -v set the file's version/generation number"
-
-#define chgrp_trivial_usage \
- "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
-#define chgrp_full_usage \
- "Change the group membership of each FILE to GROUP" \
- "\n\nOptions:\n" \
- " -R Changes files and directories recursively\n" \
- " -h Do not dereference symbolic links" \
- USE_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
- )
-#define chgrp_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chgrp root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+ " A Don't track atime\n" \
+ " a Append mode only\n" \
+ " c Enable compress\n" \
+ " D Write dir contents synchronously\n" \
+ " d Do not backup with dump\n" \
+ " i Cannot be modified (immutable)\n" \
+ " j Write all data to journal first\n" \
+ " s Zero disk storage when deleted\n" \
+ " S Write file contents synchronously\n" \
+ " t Disable tail-merging of partial blocks with other files\n" \
+ " u Allow file to be undeleted\n" \
+ "Options:\n" \
+ " -R Recursively list subdirectories\n" \
+ " -v Set the file's version/generation number"
+
+#define chcon_trivial_usage \
+ "[OPTIONS] CONTEXT FILE...\n" \
+ " chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" \
+ " chcon [OPTIONS] --reference=RFILE FILE...\n"
+#define chcon_full_usage \
+ "Change the security context of each FILE to CONTEXT\n" \
+ "\n -v, --verbose Verbose" \
+ "\n -c, --changes Report changes made" \
+ "\n -h, --no-dereference Affect symlinks instead of their targets" \
+ "\n -f, --silent, --quiet Suppress most error messages" \
+ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
+ "\n -u, --user=USER Set user USER in the target security context" \
+ "\n -r, --role=ROLE Set role ROLE in the target security context" \
+ "\n -t, --type=TYPE Set type TYPE in the target security context" \
+ "\n -l, --range=RANGE Set range RANGE in the target security context" \
+ "\n -R, --recursive Recurse subdirectories" \
#define chmod_trivial_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+#define chgrp_trivial_usage \
+ "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
+#define chgrp_full_usage \
+ "Change the group membership of each FILE to GROUP" \
+ "\n\nOptions:" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
+ USE_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v Verbose" \
+ "\n -f Hide errors" \
+ )
+#define chgrp_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chgrp root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+
#define chown_trivial_usage \
- "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
"Change the owner and/or group of each FILE to OWNER and/or GROUP" \
"\n\nOptions:" \
- "\n -R Changes files and directories recursively" \
- "\n -h Do not dereference symbolic links" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
#define chpst_full_usage \
"Change the process state and run specified program" \
"\n\nOptions:\n" \
- " -u user[:grp] set uid and gid\n" \
- " -U user[:grp] set environment variables UID and GID\n" \
- " -e dir set environment variables as specified by files\n" \
+ " -u user[:grp] Set uid and gid\n" \
+ " -U user[:grp] Set environment variables UID and GID\n" \
+ " -e dir Set environment variables as specified by files\n" \
" in the directory: file=1st_line_of_file\n" \
- " -/ dir chroot to dir\n" \
- " -n inc add inc to nice value\n" \
- " -m bytes limit data segment, stack segment, locked physical pages,\n" \
+ " -/ dir Chroot to dir\n" \
+ " -n inc Add inc to nice value\n" \
+ " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
" and total of all segment per process to bytes bytes each\n" \
- " -d bytes limit data segment\n" \
- " -o n limit the number of open file descriptors per process to n\n" \
- " -p n limit number of processes per uid to n\n" \
- " -f bytes limit output file size to bytes bytes\n" \
- " -c bytes limit core file size to bytes bytes\n" \
- " -v verbose\n" \
- " -P run prog in a new process group\n" \
- " -0 close standard input\n" \
- " -1 close standard output\n" \
- " -2 close standard error"
+ " -d bytes Limit data segment\n" \
+ " -o n Limit the number of open file descriptors per process to n\n" \
+ " -p n Limit number of processes per uid to n\n" \
+ " -f bytes Limit output file size to bytes bytes\n" \
+ " -c bytes Limit core file size to bytes bytes\n" \
+ " -v Verbose\n" \
+ " -P Run prog in a new process group\n" \
+ " -0 Close standard input\n" \
+ " -1 Close standard output\n" \
+ " -2 Close standard error"
#define setuidgid_trivial_usage \
"account prog args"
#define setuidgid_full_usage \
"Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
#define cmp_full_usage \
"Compares FILE1 vs stdin if FILE2 is not specified" \
"\n\nOptions:\n" \
" -l Write the byte numbers (decimal) and values (octal)\n" \
" for all differing bytes\n" \
- " -s quiet mode - do not print"
+ " -s Quiet"
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define bbsh_full_usage \
"The bbsh shell (command interpreter)"
+#define chrt_trivial_usage \
+ "[OPTION]... [prio] [pid | command [arg]...]"
+#define chrt_full_usage \
+ "manipulate real-time attributes of a process" \
+ "\n\nOptions:\n" \
+ " -p operate on pid\n" \
+ " -r set scheduling policy to SCHED_RR\n" \
+ " -f set scheduling policy to SCHED_FIFO\n" \
+ " -o set scheduling policy to SCHED_OTHER\n" \
+ " -m show min and max priorities"
+
+#define chrt_example_usage \
+ "$ chrt -r 4 sleep 900 ; x=$!\n" \
+ "$ chrt -f -p 3 $x\n" \
+ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
+
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
#define cp_full_usage \
"Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
- "\n\nOptions:\n" \
- " -a Same as -dpR\n" \
- " -d,-P Preserve links\n" \
- " -H,-L Dereference all symlinks (implied by default)\n" \
- " -p Preserve file attributes if possible\n" \
- " -f force, overwrite\n" \
- " -i interactive, prompt before overwrite\n" \
- " -R,-r Copy directories recursively\n" \
- " -l,-s Create (sym)links"
+ "\n\nOptions:" \
+ "\n -a Same as -dpR" \
+ USE_SELINUX( \
+ "\n -c Preserves security context" \
+ ) \
+ "\n -d,-P Preserve links" \
+ "\n -H,-L Dereference all symlinks (default)" \
+ "\n -p Preserve file attributes if possible" \
+ "\n -f Force overwrite" \
+ "\n -i Prompt before overwrite" \
+ "\n -R,-r Recurse directories" \
+ "\n -l,-s Create (sym)links"
#define cpio_trivial_usage \
"-[dimtuv][F cpiofile]"
#define cpio_full_usage \
"Extract or list files from a cpio archive\n" \
"Main operation mode:\n" \
- " d make leading directories\n" \
- " i extract\n" \
- " m preserve mtime\n" \
- " t list\n" \
- " v verbose\n" \
- " u unconditional overwrite\n" \
- " F input from file"
+ " d Make leading directories\n" \
+ " i Extract\n" \
+ " m Preserve mtime\n" \
+ " t List\n" \
+ " v Verbose\n" \
+ " u Unconditional overwrite\n" \
+ " F Input from file"
#define crond_trivial_usage \
"-d[#] -c <crondir> -f -b"
#define crond_full_usage \
" -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
- " -d num debug level\n" \
- " -l num log level (8 - default)\n" \
- " -S log to syslogd (default)\n" \
- " -L file log to file\n" \
- " -f run in foreground\n" \
- " -b run in background (default)\n" \
- " -c dir working dir"
+ " -d num Debug level\n" \
+ " -l num Log level (8 - default)\n" \
+ " -S Log to syslogd (default)\n" \
+ " -L file Log to file\n" \
+ " -f Run in foreground\n" \
+ " -b Run in background (default)\n" \
+ " -c dir Working dir"
#define crontab_trivial_usage \
"[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
- " file <opts> replace crontab from file\n" \
+ " File <opts> replace crontab from file\n" \
" - <opts> replace crontab from stdin\n" \
" -u user specify user\n" \
" -l [user] list crontab for user\n" \
#define dd_full_usage \
"Copy a file with converting and formatting" \
"\n\nOptions:\n" \
- " if=FILE read from FILE instead of stdin\n" \
- " of=FILE write to FILE instead of stdout\n" \
- " bs=N read and write N bytes at a time\n" \
+ " if=FILE Read from FILE instead of stdin\n" \
+ " of=FILE Write to FILE instead of stdout\n" \
+ " bs=N Read and write N bytes at a time\n" \
USE_FEATURE_DD_IBS_OBS( \
- " ibs=N read N bytes at a time\n") \
+ " ibs=N Read N bytes at a time\n") \
USE_FEATURE_DD_IBS_OBS( \
- " obs=N write N bytes at a time\n") \
- " count=N copy only N input blocks\n" \
- " skip=N skip N input blocks\n" \
- " seek=N skip N output blocks\n" \
+ " obs=N Write N bytes at a time\n") \
+ " count=N Copy only N input blocks\n" \
+ " skip=N Skip N input blocks\n" \
+ " seek=N Skip N output blocks\n" \
USE_FEATURE_DD_IBS_OBS( \
- " conv=notrunc don't truncate output file\n" \
- " conv=noerror continue after read errors\n" \
- " conv=sync pad blocks with zeros\n") \
+ " conv=notrunc Don't truncate output file\n" \
+ " conv=noerror Continue after read errors\n" \
+ " conv=sync Pad blocks with zeros\n") \
"\n" \
"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
"MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
- "GROUP"
+ USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
#define delgroup_full_usage \
- "Delete group GROUP from the system"
+ "Delete group GROUP from the system" \
+ USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
#define devfsd_full_usage \
"Manage devfs permissions and old device name symlinks" \
"\n\nOptions:" \
- "\n mntpnt The mount point where devfs is mounted." \
- "\n -v Print the protocol version numbers for devfsd." \
- "\n and the kernel-side protocol version and exits." \
+ "\n mntpnt The mount point where devfs is mounted" \
+ "\n -v Print the protocol version numbers for devfsd" \
+ "\n and the kernel-side protocol version and exits" \
USE_DEVFSD_FG_NP( \
- "\n -fg Run the daemon in the foreground." \
+ "\n -fg Run the daemon in the foreground" \
"\n -np Exit after parsing the configuration file" \
- "\n and processing synthetic REGISTER events." \
- "\n Do not poll for events.")
+ "\n and processing synthetic REGISTER events," \
+ "\n do not poll for events")
#define df_trivial_usage \
"[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
"Print the filesystem space used and space available" \
"\n\nOptions:\n" \
USE_FEATURE_HUMAN_READABLE( \
- "\n -h print sizes in human readable format (e.g., 1K 243M 2G )\n" \
- " -m print sizes in megabytes\n" \
- " -k print sizes in kilobytes(default)") \
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Print sizes in megabytes\n" \
+ " -k Print sizes in kilobytes(default)") \
SKIP_FEATURE_HUMAN_READABLE( \
- "\n -k ignored")
+ "\n -k Ignored")
#define df_example_usage \
"$ df\n" \
"Filesystem 1k-blocks Used Available Use% Mounted on\n" \
" -L Use LABEL instead of the filename in the unified header\n" \
" -N Treat absent files as empty\n" \
" -q Output only whether files differ\n" \
- " -r Recursively compare any subdirectories\n" \
+ " -r Recursively compare subdirectories\n" \
" -S Start with FILE when comparing directories\n" \
" -T Make tabs line up by prefixing a tab when necessary\n" \
" -s Report when two files are the same\n" \
" -t Expand tabs to spaces in output\n" \
" -U Output LINES lines of context\n" \
- " -w Ignore all whitespace\n"
+ " -w Ignore all whitespace"
#define dirname_trivial_usage \
"FILENAME"
#define dnsd_full_usage \
"Small and static DNS server daemon" \
"\n\nOptions:\n" \
- " -c config filename\n" \
+ " -c Config filename\n" \
" -t TTL in seconds\n" \
- " -p listening port\n" \
- " -i listening iface ip (default all)\n" \
- " -d daemonize"
+ " -p Listening port\n" \
+ " -i Listening ip (default all)\n" \
+ " -d Daemonize"
#define dos2unix_trivial_usage \
"[option] [FILE]"
"is given, the input is converted to the opposite output format.\n" \
"When no file is given, use stdin for input and stdout for output." \
"\n\nOptions:\n" \
- " -u output will be in UNIX format\n" \
- " -d output will be in DOS format"
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
" bytes." \
"\n\nOptions:\n" \
- " -a show sizes of files in addition to directories\n" \
- " -H follow symbolic links that are FILE command line args\n" \
- " -L follow all symbolic links encountered\n" \
- " -d N limit output to directories (and files with -a) of depth < N\n" \
- " -c output a grand total\n" \
- " -l count sizes many times if hard linked\n" \
- " -s display only a total for each argument\n" \
- " -x skip directories on different filesystems\n" \
+ " -a Show sizes of files in addition to directories\n" \
+ " -H Follow symlinks that are FILE command line args\n" \
+ " -L Follow all symlinks encountered\n" \
+ " -d N Limit output to directories (and files with -a) of depth < N\n" \
+ " -c Output a grand total\n" \
+ " -l Count sizes many times if hard linked\n" \
+ " -s Display only a total for each argument\n" \
+ " -x Skip directories on different filesystems\n" \
USE_FEATURE_HUMAN_READABLE( \
- " -h print sizes in human readable format (e.g., 1K 243M 2G )\n" \
- " -m print sizes in megabytes\n" \
+ " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Print sizes in megabytes\n" \
) \
- " -k print sizes in kilobytes" \
+ " -k Print sizes in kilobytes" \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
#define du_example_usage \
"$ du\n" \
" -y Assume 'yes' to all questions\n" \
" -c Check for bad blocks and add them to the badblock list\n" \
" -f Force checking even if filesystem is marked clean\n" \
- " -v Be verbose\n" \
+ " -v Verbose\n" \
" -b superblock Use alternative superblock\n" \
" -B blocksize Force blocksize when looking for superblock\n" \
" -j journal Set location of the external journal\n" \
"Print the specified ARGs to stdout" \
USE_FEATURE_FANCY_ECHO( \
"\n\nOptions:\n" \
- " -n suppress trailing newline\n" \
- " -e interpret backslash-escaped characters (i.e., \\t=tab)\n" \
- " -E disable interpretation of backslash-escaped characters" \
+ " -n Suppress trailing newline\n" \
+ " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
+ " -E Disable interpretation of backslash-escaped characters" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
#define eject_full_usage \
"Eject specified DEVICE (or default /dev/cdrom)" \
"\n\nOptions:\n" \
- " -t close tray\n" \
- " -T open/close tray (toggle)"
+ " -t Close tray\n" \
+ " -T Open/close tray (toggle)"
#define ed_trivial_usage ""
#define ed_full_usage ""
"Print the current environment or run a program after setting\n" \
"up the specified environment" \
"\n\nOptions:\n" \
- " -, -i start with an empty environment\n" \
- " -u remove variable from the environment"
+ " -, -i Start with an empty environment\n" \
+ " -u Remove variable from the environment"
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
" ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
" ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
" ARG1 > ARG2 ARG1 is greater than ARG2\n" \
- " ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
- " ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
- " ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
- " ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
- " ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
- " STRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
- " match STRING REGEXP same as STRING : REGEXP\n" \
- " substr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
- " index STRING CHARS index in STRING where any CHARS is found, or 0\n" \
- " length STRING length of STRING\n" \
- " quote TOKEN interpret TOKEN as a string, even if\n" \
+ " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
+ " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
+ " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
+ " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
+ " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
+ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
+ " match STRING REGEXP Same as STRING : REGEXP\n" \
+ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
+ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
+ " length STRING Length of STRING\n" \
+ " quote TOKEN Interpret TOKEN as a string, even if\n" \
" it is a keyword like 'match' or an\n" \
" operator like '/'\n" \
- " (EXPRESSION) value of EXPRESSION\n\n" \
+ " (EXPRESSION) Value of EXPRESSION\n\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
"of characters matched or 0."
#define fakeidentd_trivial_usage \
- "[-b ip] [STRING]"
+ "[-fiw] [-b ADDR] [STRING]"
#define fakeidentd_full_usage \
- "Return a set string to auth requests" \
- "\n\nOptions:\n" \
- " -b Bind to ip address\n" \
- " STRING The ident answer string (default is nobody)"
+ "Provide fake ident (auth) service" \
+ "\n\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -i Inetd mode" \
+ "\n -w Inetd 'wait' mode" \
+ "\n -b ADDR Bind to specified address" \
+ "\n STRING Ident answer string (default is 'nobody')"
#define false_trivial_usage \
""
"Search for files in a directory hierarchy. The default PATH is\n" \
"the current directory; default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:\n" \
- " -follow Dereference symbolic links\n" \
+ " -follow Dereference symlinks\n" \
" -name PATTERN File name (leading directories removed) matches PATTERN\n" \
" -print Print (default and assumed)" \
USE_FEATURE_FIND_PRINT0( \
"\n or exactly (NNN)" \
) USE_FEATURE_FIND_MTIME( \
"\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \
- "\n or exactly (N) days" \
+ "\n Or exactly (N) days" \
) USE_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
"\n or exactly (N) minutes" \
) USE_FEATURE_FIND_EXEC( \
"\n -exec CMD Execute CMD with all instances of {} replaced by the" \
"\n files matching EXPRESSION" \
- ) USE_DESKTOP( \
+ ) USE_FEATURE_FIND_USER( \
+ "\n -user NAME File is owned by user NAME (numeric user ID allowed)" \
+ ) USE_FEATURE_FIND_GROUP( \
+ "\n -group NAME File belongs to group NAME (numeric group ID allowed)" \
+ ) USE_FEATURE_FIND_DEPTH( \
+ "\n -depth Process directory after traversing it" \
+ ) USE_FEATURE_FIND_SIZE( \
"\n -size N File size is N" \
+ ) USE_FEATURE_FIND_PRUNE( \
"\n -prune Stop traversing current subtree" \
- "\n (expr) Group" \
+ ) USE_FEATURE_FIND_DELETE( \
+ "\n -delete Delete files; Turns on -depth option" \
+ ) USE_FEATURE_FIND_PATH( \
+ "\n -path Path matches PATTERN" \
+ ) USE_FEATURE_FIND_PAREN( \
+ "\n (EXPR) Group an expression" \
)
#define find_example_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
"standard output" \
"\n\nOptions:\n" \
- " -b count bytes rather than columns\n" \
- " -s break at spaces\n" \
- " -w use WIDTH columns instead of 80"
+ " -b Count bytes rather than columns\n" \
+ " -s Break at spaces\n" \
+ " -w Use WIDTH columns instead of 80"
#define free_trivial_usage \
""
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
- "[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]"
+ "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]"
#define fsck_full_usage \
"Check and repair filesystems" \
"\n\nOptions:\n" \
" -P When using -A, check filesystems in parallel\n" \
" -R When using -A, skip the root filesystem\n" \
" -T Don't show title on startup\n" \
- " -V Verbose mode\n" \
- " -C Write status information to specified filedescriptor\n" \
- " -t List of filesystem types to check"
+ " -V Verbose\n" \
+ " -C n Write status information to specified filedescriptor\n" \
+ " -t type List of filesystem types to check"
#define fsck_minix_trivial_usage \
"[-larvsmf] /dev/name"
" -l Lists all filenames\n" \
" -r Perform interactive repairs\n" \
" -a Perform automatic repairs\n" \
- " -v verbose\n" \
+ " -v Verbose\n" \
" -s Outputs super-block information\n" \
" -m Activates MINIX-like \"mode not cleared\" warnings\n" \
" -f Force file system check"
" -6 When using port/proto only search IPv6 space\n" \
" -SIGNAL When used with -k, this signal will be used to kill"
+#define getenforce_trivial_usage
+#define getenforce_full_usage
+
#define getopt_trivial_usage \
"[OPTIONS]..."
#define getopt_full_usage \
" esac\n" \
"done\n"
+#define getsebool_trivial_usage \
+ "-a or getsebool boolean..."
+#define getsebool_full_usage \
+ " -a Show all SELinux booleans"
+
#define getty_trivial_usage \
"[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
" -H login_host Log login_host into the utmp file as the hostname"
#define grep_trivial_usage \
- "[-rihHnqvso" \
+ "[-HhrilLnqvso" \
+ USE_DESKTOP("w") \
+ "eF" \
USE_FEATURE_GREP_EGREP_ALIAS("E") \
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
#define grep_full_usage \
"Search for PATTERN in each FILE or standard input" \
- "\n\nOptions:\n" \
- " -H prefix output lines with filename where match was found\n" \
- " -h suppress the prefixing filename on output\n" \
- " -r recurse subdirectories\n" \
- " -i ignore case distinctions\n" \
- " -l list names of files that match\n" \
- " -L list names of files that do not match\n" \
- " -n print line number with output lines\n" \
- " -q be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
- " -v select non-matching lines\n" \
- " -s suppress file open/read error messages\n" \
- " -c only print count of matching lines\n" \
- " -f read PATTERN from file\n" \
- " -o show only the part of a line that matches PATTERN\n" \
- " -e PATTERN is a regular expression\n" \
- " -F PATTERN is a set of newline-separated strings" \
+ "\n\nOptions:" \
+ "\n -H Prefix output lines with filename where match was found" \
+ "\n -h Suppress the prefixing filename on output" \
+ "\n -r Recurse subdirectories" \
+ "\n -i Ignore case distinctions" \
+ "\n -l List names of files that match" \
+ "\n -L List names of files that do not match" \
+ "\n -n Print line number with output lines" \
+ "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \
+ "\n -v Select non-matching lines" \
+ "\n -s Suppress file open/read error messages" \
+ "\n -c Only print count of matching lines" \
+ "\n -f Read PATTERN from file" \
+ "\n -o Show only the part of a line that matches PATTERN" \
+ USE_DESKTOP( \
+ "\n -w Match whole words only") \
+ "\n -e PATTERN is a regular expression" \
+ "\n -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
USE_FEATURE_GREP_CONTEXT( \
- "\n -A print NUM lines of trailing context") \
- USE_FEATURE_GREP_CONTEXT( \
- "\n -B print NUM lines of leading context") \
- USE_FEATURE_GREP_CONTEXT( \
- "\n -C print NUM lines of output context")
+ "\n -A Print NUM lines of trailing context" \
+ "\n -B Print NUM lines of leading context" \
+ "\n -C Print NUM lines of output context") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
#define halt_full_usage \
"Halt the system" \
"\n\nOptions:\n" \
- " -d delay interval for halting\n" \
- " -n no call to sync()\n" \
- " -f force halt (don't go through init)"
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force halt (don't go through init)"
#define hdparm_trivial_usage \
"[options] [device] .."
USE_FEATURE_HDPARM_GET_IDENTITY( \
"If no device name is specified try to read from stdin.\n\n") \
"Options:\n" \
- " -a get/set fs readahead\n" \
- " -A set drive read-lookahead flag (0/1)\n" \
- " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- " -B set Advanced Power Management setting (1-255)\n" \
- " -c get/set IDE 32-bit IO setting\n" \
- " -C check IDE power mode status\n" \
+ " -a Get/set fs readahead\n" \
+ " -A Set drive read-lookahead flag (0/1)\n" \
+ " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ " -B Set Advanced Power Management setting (1-255)\n" \
+ " -c Get/set IDE 32-bit IO setting\n" \
+ " -C Check IDE power mode status\n" \
USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
- " -d get/set using_dma flag\n") \
- " -D enable/disable drive defect-mgmt\n" \
- " -f flush buffer cache for device on exit\n" \
- " -g display drive geometry\n" \
- " -h display terse usage information\n" \
+ " -d Get/set using_dma flag\n") \
+ " -D Enable/disable drive defect-mgmt\n" \
+ " -f Flush buffer cache for device on exit\n" \
+ " -g Display drive geometry\n" \
+ " -h Display terse usage information\n" \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -i display drive identification\n") \
+ " -i Display drive identification\n") \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -I detailed/current information directly from drive\n") \
- " -k get/set keep_settings_over_reset flag (0/1)\n" \
- " -K set drive keep_features_over_reset flag (0/1)\n" \
- " -L set drive doorlock (0/1) (removable harddisks only)\n" \
- " -m get/set multiple sector count\n" \
- " -n get/set ignore-write-errors flag (0/1)\n" \
- " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- " -P set drive prefetch count\n" \
- " -q change next setting quietly\n" \
- " -Q get/set DMA tagged-queuing depth (if supported)\n" \
- " -r get/set readonly flag (DANGEROUS to set)\n" \
+ " -I Detailed/current information directly from drive\n") \
+ " -k Get/set keep_settings_over_reset flag (0/1)\n" \
+ " -K Set drive keep_features_over_reset flag (0/1)\n" \
+ " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
+ " -m Get/set multiple sector count\n" \
+ " -n Get/set ignore-write-errors flag (0/1)\n" \
+ " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ " -P Set drive prefetch count\n" \
+ " -q Change next setting quietly\n" \
+ " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
+ " -r Get/set readonly flag (DANGEROUS to set)\n" \
USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
- " -R register an IDE interface (DANGEROUS)\n") \
- " -S set standby (spindown) timeout\n" \
- " -t perform device read timings\n" \
- " -T perform cache read timings\n" \
- " -u get/set unmaskirq flag (0/1)\n" \
+ " -R Register an IDE interface (DANGEROUS)\n") \
+ " -S Set standby (spindown) timeout\n" \
+ " -t Perform device read timings\n" \
+ " -T Perform cache read timings\n" \
+ " -u Get/set unmaskirq flag (0/1)\n" \
USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- " -U un-register an IDE interface (DANGEROUS)\n") \
- " -v defaults; same as -mcudkrag for IDE drives\n" \
- " -V display program version and exit immediately\n" \
+ " -U Un-register an IDE interface (DANGEROUS)\n") \
+ " -v Defaults; same as -mcudkrag for IDE drives\n" \
+ " -V Display program version and exit immediately\n" \
USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
- " -w perform device reset (DANGEROUS)\n") \
- " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ " -w Perform device reset (DANGEROUS)\n") \
+ " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \
USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
- " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
- " -X set IDE xfer mode (DANGEROUS)\n" \
- " -y put IDE drive in standby mode\n" \
- " -Y put IDE drive to sleep\n" \
- " -Z disable Seagate auto-powersaving mode\n" \
- " -z re-read partition table"
+ " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ " -X Set IDE xfer mode (DANGEROUS)\n" \
+ " -y Put IDE drive in standby mode\n" \
+ " -Y Put IDE drive to sleep\n" \
+ " -Z Disable Seagate auto-powersaving mode\n" \
+ " -z Re-read partition table"
#define head_trivial_usage \
"[OPTION]... [FILE]..."
"\n\nOptions:" \
"\n -n NUM Print first NUM lines instead of first 10" \
USE_FEATURE_FANCY_HEAD( \
- "\n -c NUM output the first NUM bytes" \
- "\n -q never output headers giving file names" \
- "\n -v always output headers giving file names")
+ "\n -c NUM Output the first NUM bytes" \
+ "\n -q Never output headers giving file names" \
+ "\n -v Always output headers giving file names")
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
" -f FORMAT FILE\n" \
" -n LENGTH Interpret only length bytes of input\n" \
" -o Two-byte octal display\n" \
- " -s OFFSET Skip offset byte\n" \
- " -v display all input data\n" \
+ " -s OFFSET Skip offset bytes\n" \
+ " -v Display all input data\n" \
" -x Two-byte hexadecimal display"
#define hostid_trivial_usage \
" -d STRING URL decode STRING"
#define hwclock_trivial_usage \
- "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
+ "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
+ " [-l|--localtime] [-u|--utc]" \
+ " [-f FILE]"
#define hwclock_full_usage \
- "Query and set the hardware clock (RTC)" \
+ "Query and set a hardware clock (RTC)" \
"\n\nOptions:\n" \
- " -r read hardware clock and print result\n" \
- " -s set the system time from the hardware clock\n" \
- " -w set the hardware clock to the current system time\n" \
- " -u the hardware clock is kept in coordinated universal time\n" \
- " -l the hardware clock is kept in local time"
+ " -r Read hardware clock and print result\n" \
+ " -s Set the system time from the hardware clock\n" \
+ " -w Set the hardware clock to the current system time\n" \
+ " -u The hardware clock is kept in coordinated universal time\n" \
+ " -l The hardware clock is kept in local time\n" \
+ " -f FILE Use the specified clock (e.g. /dev/rtc2)"
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
"Print information for USERNAME or the current user" \
"\n\nOptions:\n" \
USE_SELINUX( \
- " -c prints only the security context\n") \
- " -g prints only the group ID\n" \
- " -u prints only the user ID\n" \
- " -n print a name instead of a number\n" \
- " -r prints the real user ID instead of the effective ID"
+ " -Z prints only the security context\n" \
+ ) \
+ " -g Prints only the group ID\n" \
+ " -u Prints only the user ID\n" \
+ " -n Print a name instead of a number\n" \
+ " -r Prints the real user ID instead of the effective ID"
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
"<-ahinv> <ifaces...>"
#define ifup_full_usage \
"Options:\n" \
- " -h this help\n" \
- " -a de/configure all interfaces automatically\n" \
- " -i FILE use FILE for interface definitions\n" \
- " -n print out what would happen, but don't do it\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
" (note that this option doesn't disable mappings)\n" \
- " -v print out what would happen before doing it\n" \
- " -m don't run any mappings\n" \
- " -f force de/configuration"
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
#define ifdown_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifdown_full_usage \
"Options:\n" \
- " -h this help\n" \
- " -a de/configure all interfaces automatically\n" \
- " -i FILE use FILE for interface definitions\n" \
- " -n print out what would happen, but don't do it\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
" (note that this option doesn't disable mappings)\n" \
- " -v print out what would happen before doing it\n" \
- " -m don't run any mappings\n" \
- " -f force de/configuration"
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
#define inetd_trivial_usage \
"[-f] [-q len] [conf]"
#define inetd_full_usage \
"Listen for network connections and launch programs" \
"\n\nOptions:\n" \
- " -f Run as a foreground progress\n" \
- " -q Sets the size of the socket listen queue to\n" \
- " the specified value. Default is 128"
+ " -f Run in foreground\n" \
+ " -q N Set the size of the socket listen queue to N\n" \
+ " (default: 128)"
#define init_trivial_usage \
""
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
-" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
+" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
-" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
-" wants to run 'reboot' at this point to cause the system to reboot.\n" \
+" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
+" wants to run 'reboot' at this point to cause the system to reboot.\n" \
" Finally the 'shutdown' action specifies the actions to taken when\n" \
-" init is told to reboot. Unmounting filesystems and disabling swap\n" \
-" is a very good here\n" \
+" init is told to reboot. Unmounting filesystems and disabling swap\n" \
+" is a very good here.\n" \
"\n" \
" Run repeatedly actions:\n" \
"\n" \
"\n\nOptions:\n" \
" -f Force module to load into the wrong kernel version\n" \
" -k Make module autoclean-able\n" \
- " -v verbose output\n" \
- " -q quiet output\n" \
+ " -v Verbose\n" \
+ " -q Quiet\n" \
" -L Lock to prevent simultaneous loads of a module\n" \
USE_FEATURE_INSMOD_LOAD_MAP( \
" -m Output load map to stdout\n") \
" -o NAME Set internal module name to NAME\n" \
- " -x do not export externs"
+ " -x Do not export externs"
#define install_trivial_usage \
"[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
"Copy files and set attributes" \
"\n\nOptions:\n" \
- " -c copy the file, default\n" \
- " -d create directories\n" \
- " -g set group ownership\n" \
- " -m set permission modes\n" \
- " -o set ownership\n" \
- " -p preserve date\n" \
- " -s strip symbol tables"
-
+ " -c Copy the file, default\n" \
+ " -d Create directories\n" \
+ " -g Set group ownership\n" \
+ " -m Set permission modes\n" \
+ " -o Set ownership\n" \
+ " -p Preserve date\n" \
+ " -s Strip symbol tables" \
+ USE_SELINUX( \
+ "\n -Z Set security context of copy" \
+ )
+/* would need to make the " | " optional depending on more than one selected */
#define ip_trivial_usage \
- "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}"
+ "[OPTIONS] {" \
+ USE_FEATURE_IP_ADDRESS("address | ") \
+ USE_FEATURE_IP_ROUTE("route | ") \
+ USE_FEATURE_IP_LINK("link | ") \
+ USE_FEATURE_IP_TUNNEL("tunnel | ") \
+ USE_FEATURE_IP_RULE("rule") \
+ "} {COMMAND}"
#define ip_full_usage \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
- "where OBJECT := {link | addr | route | tunnel |rule}\n" \
+ "where OBJECT := {" \
+ USE_FEATURE_IP_ADDRESS("address | ") \
+ USE_FEATURE_IP_ROUTE("route | ") \
+ USE_FEATURE_IP_LINK("link | ") \
+ USE_FEATURE_IP_TUNNEL("tunnel | ") \
+ USE_FEATURE_IP_RULE("rule") \
+ "}\n" \
"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
"[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
"Calculate IP network settings from a IP address" \
- "\n\nOptions:\n" \
- " -b --broadcast Display calculated broadcast address\n" \
- " -n --network Display calculated network address\n" \
- " -m --netmask Display default netmask for IP" \
+ "\n\nOptions:" \
+ "\n -b --broadcast Display calculated broadcast address" \
+ "\n -n --network Display calculated network address" \
+ "\n -m --netmask Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
- "\n -p --prefix Display the prefix for IP/NETMASK\n" \
- " -h --hostname Display first resolved host name\n" \
- " -s --silent Don't ever display error messages")
+ "\n -p --prefix Display the prefix for IP/NETMASK" \
+ "\n -h --hostname Display first resolved host name" \
+ "\n -s --silent Don't ever display error messages")
#define ipcrm_trivial_usage \
"[-[MQS] key] [-[mqs] id]"
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage \
- " -i specify a specific resource id\n" \
+ " -i Specify a specific resource id\n" \
"Resource specification:\n" \
- " -m shared memory segments\n" \
- " -q message queues\n" \
- " -s semaphore arrays\n" \
- " -a all (default)\n" \
+ " -m Shared memory segments\n" \
+ " -q Message queues\n" \
+ " -s Semaphore arrays\n" \
+ " -a All (default)\n" \
"Output format:\n" \
- " -t time\n" \
- " -c creator\n" \
- " -p pid\n" \
- " -l limits\n" \
- " -u summary"
+ " -t Time\n" \
+ " -c Creator\n" \
+ " -p Pid\n" \
+ " -l Limits\n" \
+ " -u Summary"
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
- "iplink set DEVICE { up | down | arp { on | off } |\n" \
+ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
- " iplink show [ DEVICE ]"
+ "iplink show [ DEVICE ]"
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
" [ oif STRING ] [ tos TOS ]\n" \
- " iproute { add | del | change | append | replace | monitor } ROUTE\n" \
+ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
" SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
" ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
"Kernel logger" \
"\n\nOptions:\n" \
" -c n Sets the default log level of console messages to n\n" \
- " -n Run as a foreground process"
+ " -n Run as foreground process"
#define length_trivial_usage \
"STRING"
"<personality> <program> [args ...]"
#define setarch_full_usage \
"Personality may be:\n" \
- " linux32 Set 32bit uname emulation\n" \
- " linux64 Set 64bit uname emulation"
+ " linux32 Set 32bit uname emulation\n" \
+ " linux64 Set 64bit uname emulation"
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
"Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
"You may use '--' to indicate that all following arguments are non-options." \
"\n\nOptions:\n" \
- " -s make symbolic links instead of hard links\n" \
- " -f remove existing destination files\n" \
- " -n no dereference symlinks - treat like normal file\n" \
- " -b make a backup of the target (if exists) before link operation\n" \
- " -S suf use suffix instead of ~ when making backup files"
+ " -s Make symlinks instead of hardlinks\n" \
+ " -f Remove existing destination files\n" \
+ " -n No dereference symlinks - treat like normal file\n" \
+ " -b Make a backup of the target (if exists) before link operation\n" \
+ " -S suf Use suffix instead of ~ when making backup files"
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
"lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
+#define load_policy_trivial_usage \
+ "[FILE]"
+#define load_policy_full_usage
+
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage \
"\n\nOptions:\n" \
" -s Log to stderr as well as the system log\n" \
" -t TAG Log using the specified tag (defaults to user name)\n" \
- " -p PRIO Enter the message with the specified priority\n" \
- " This may be numerical or a 'facility.level' pair"
+ " -p PRIO Enter the message with the specified priority.\n" \
+ " This may be numerical or a 'facility.level' pair."
#define logger_example_usage \
"$ logger \"hello\"\n"
#define logread_full_usage \
"Show the messages from syslogd (using circular buffer)" \
"\n\nOptions:\n" \
- " -f output data as the log grows"
+ " -f Output data as the log grows"
#define losetup_trivial_usage \
"[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define ls_trivial_usage \
"[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
- USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
+ USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
#define ls_full_usage \
"List directory contents" \
"\n\nOptions:" \
- "\n -1 list files in a single column" \
- "\n -A do not list implied . and .." \
- "\n -a do not hide entries starting with ." \
- "\n -C list entries by columns" \
+ "\n -1 List files in a single column" \
+ "\n -A Do not list implied . and .." \
+ "\n -a Do not hide entries starting with ." \
+ "\n -C List entries by columns" \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -c with -l: show ctime") \
+ "\n -c With -l: show ctime") \
USE_FEATURE_LS_COLOR( \
- "\n --color[={always,never,auto}] control coloring") \
- "\n -d list directory entries instead of contents" \
+ "\n --color[={always,never,auto}] Control coloring") \
+ "\n -d List directory entries instead of contents" \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -e list both full date and full time") \
+ "\n -e List both full date and full time") \
USE_FEATURE_LS_FILETYPES( \
- "\n -F append indicator (one of */=@|) to entries") \
- "\n -i list the i-node for each file" \
- "\n -l use a long listing format" \
- "\n -n list numeric UIDs and GIDs instead of names" \
+ "\n -F Append indicator (one of */=@|) to entries") \
+ "\n -i List the i-node for each file" \
+ "\n -l Use a long listing format" \
+ "\n -n List numeric UIDs and GIDs instead of names" \
USE_FEATURE_LS_FILETYPES( \
- "\n -p append indicator (one of /=@|) to entries") \
+ "\n -p Append indicator (one of /=@|) to entries") \
USE_FEATURE_LS_FOLLOWLINKS( \
- "\n -L list entries pointed to by symbolic links") \
+ "\n -L List entries pointed to by symlinks") \
USE_FEATURE_LS_RECURSIVE( \
- "\n -R list subdirectories recursively") \
+ "\n -R List subdirectories recursively") \
USE_FEATURE_LS_SORTFILES( \
- "\n -r sort the listing in reverse order") \
+ "\n -r Sort the listing in reverse order") \
USE_FEATURE_LS_SORTFILES( \
- "\n -S sort the listing by file size") \
- "\n -s list the size of each file, in blocks" \
+ "\n -S Sort the listing by file size") \
+ "\n -s List the size of each file, in blocks" \
USE_FEATURE_AUTOWIDTH( \
- "\n -T NUM assume Tabstop every NUM columns") \
+ "\n -T NUM Assume Tabstop every NUM columns") \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -t with -l: show modification time") \
+ "\n -t With -l: show modification time") \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -u with -l: show access time") \
+ "\n -u With -l: show access time") \
USE_FEATURE_LS_SORTFILES( \
- "\n -v sort the listing by version") \
+ "\n -v Sort the listing by version") \
USE_FEATURE_AUTOWIDTH( \
- "\n -w NUM assume the terminal is NUM columns wide") \
- "\n -x list entries by lines instead of by columns" \
+ "\n -w NUM Assume the terminal is NUM columns wide") \
+ "\n -x List entries by lines instead of by columns" \
USE_FEATURE_LS_SORTFILES( \
- "\n -X sort the listing by extension") \
+ "\n -X Sort the listing by extension") \
USE_FEATURE_HUMAN_READABLE( \
- "\n -h print sizes in human readable format (e.g., 1K 243M 2G)") \
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
+ USE_SELINUX( \
+ "\n -k Print security context") \
USE_SELINUX( \
- "\n -k print security context") \
+ "\n -K Print security context in long format") \
USE_SELINUX( \
- "\n -K print security context in long format")
+ "\n -Z Print security context and permission")
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
#define lsattr_full_usage \
"List file attributes on an ext2 fs" \
"\n\nOptions:\n" \
- " -R recursively list subdirectories\n" \
- " -a do not hide entries starting with .\n" \
- " -d list directory entries instead of contents\n" \
- " -l print long flag names\n" \
- " -v list the file's version/generation number"
+ " -R Recursively list subdirectories\n" \
+ " -a Do not hide entries starting with .\n" \
+ " -d List directory entries instead of contents\n" \
+ " -l Print long flag names\n" \
+ " -v List the file's version/generation number"
#define lsmod_trivial_usage \
""
"Create a range of special files as specified in a device table.\n" \
"Device table entries take the form of:\n" \
"<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
- "Where name is the file name, type can be one of:\n" \
- " f A regular file\n" \
- " d Directory\n" \
- " c Character special device file\n" \
- " b Block special device file\n" \
- " p Fifo (named pipe)\n" \
+ "Where name is the file name, type can be one of:\n" \
+ " f A regular file\n" \
+ " d Directory\n" \
+ " c Character special device file\n" \
+ " b Block special device file\n" \
+ " p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"to device special files. A '-' may be used for blank entries."
"/dev/hda[0-15]\n"
#endif
+#define matchpathcon_trivial_usage \
+ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
+#define matchpathcon_full_usage \
+ " -n Do not display path" \
+ "\n -N Do not use translations" \
+ "\n -f Use alternate file_context file" \
+ "\n -p Use prefix to speed translations" \
+ "\n -V Verify file context on disk matches defaults"
+
#define md5sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
"\n\nOptions:\n" \
"With no FILE, or when FILE is -, read standard input." \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
- " -c check MD5 sums against given list\n" \
+ " -c Check MD5 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
- " -s don't output anything, status code shows success\n" \
- " -w warn about improperly formatted MD5 checksum lines")
+ " -s Don't output anything, status code shows success\n" \
+ " -w Warn about improperly formatted MD5 checksum lines")
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
#define mkdir_full_usage \
"Create the DIRECTORY(ies) if they do not already exist" \
"\n\nOptions:\n" \
- " -m set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
- " -p no error if existing, make parent directories as needed"
+ " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
+ " -p No error if existing, make parent directories as needed" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
#define mkdir_example_usage \
"$ mkdir /tmp/foo\n" \
"$ mkdir /tmp/foo\n" \
"[-M last-mounted-directory] [-S] [-T filesystem-type] " \
"device [blocks-count]"
#define mke2fs_full_usage \
- " -b size block size in bytes\n" \
- " -c check for bad blocks before creating\n" \
- " -E opts set extended options\n" \
- " -f size fragment size in bytes\n" \
- " -F force (ignore sanity checks)\n" \
- " -g num number of blocks in a block group\n" \
- " -i ratio the bytes/inode ratio\n" \
- " -j create a journal (ext3)\n" \
- " -J opts set journal options (size/device)\n" \
- " -l file read bad blocks list from file\n" \
- " -L lbl set the volume label\n" \
- " -m percent percent of fs blocks to reserve for admin\n" \
- " -M dir set last mounted directory\n" \
- " -n do not actually create anything\n" \
- " -N num number of inodes to create\n" \
- " -o os set the 'creator os' field\n" \
- " -O features dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
- " -q quiet execution\n" \
- " -r rev set filesystem revision\n" \
- " -S write superblock and group descriptors only\n" \
- " -T fs-type set usage type (news/largefile/largefile4)\n" \
- " -v verbose execution"
+ " -b size Block size in bytes\n" \
+ " -c Check for bad blocks before creating\n" \
+ " -E opts Set extended options\n" \
+ " -f size Fragment size in bytes\n" \
+ " -F Force (ignore sanity checks)\n" \
+ " -g num Number of blocks in a block group\n" \
+ " -i ratio The bytes/inode ratio\n" \
+ " -j Create a journal (ext3)\n" \
+ " -J opts Set journal options (size/device)\n" \
+ " -l file Read bad blocks list from file\n" \
+ " -L lbl Set the volume label\n" \
+ " -m percent Percent of fs blocks to reserve for admin\n" \
+ " -M dir Set last mounted directory\n" \
+ " -n Do not actually create anything\n" \
+ " -N num Number of inodes to create\n" \
+ " -o os Set the 'creator os' field\n" \
+ " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
+ " -q Quiet\n" \
+ " -r rev Set filesystem revision\n" \
+ " -S Write superblock and group descriptors only\n" \
+ " -T fs-type Set usage type (news/largefile/largefile4)\n" \
+ " -v Verbose"
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage \
"Create a named pipe (identical to 'mknod name p')" \
"\n\nOptions:\n" \
- " -m create the pipe using the specified mode (default a=rw)"
+ " -m Create the pipe using the specified mode (default a=rw)" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mknod_full_usage \
"Create a special file (block, character, or pipe)" \
"\n\nOptions:\n" \
- " -m create the special file using the specified mode (default a=rw)" \
+ " -m Create the special file using the specified mode (default a=rw)" \
"\n\nTYPEs include:\n" \
" b: Make a block (buffered) device\n" \
" c or u: Make a character (un-buffered) device\n" \
- " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
+ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
#define mknod_example_usage \
"$ mknod /dev/fd0 b 2 0\n" \
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
- "Prepare a disk partition to be used as a swap partition" \
+ "Prepare a disk partition to be used as swap partition" \
"\n\nOptions:\n" \
- " -c Check for read-ability\n" \
- " -v0 Make version 0 swap [max 128 Megs]\n" \
- " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
+ " -c Check for read-ability\n" \
+ " -v0 Make version 0 swap [max 128 Megs]\n" \
+ " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
" block-count Number of block to use (default is entire partition)"
#define mktemp_trivial_usage \
"Options:\n" \
" -k Make module autoclean-able\n" \
" -n Just show what would be done\n" \
- " -q Quiet output\n" \
+ " -q Quiet\n" \
" -r Remove module (stacks) or do autoclean\n" \
" -s Report via syslog instead of stderr\n" \
- " -v Verbose output"
+ " -v Verbose"
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
#define mount_full_usage \
"Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
"\n\nOptions:\n" \
- " -a: Mount all filesystems in fstab\n" \
+ " -a Mount all filesystems in fstab\n" \
USE_FEATURE_MTAB_SUPPORT( \
- " -f: \"Fake\" Add entry to mount table but don't mount it\n" \
- " -n: Don't write a mount table entry\n" \
+ " -f \"Fake\" Add entry to mount table but don't mount it\n" \
+ " -n Don't write a mount table entry\n" \
) \
- " -o option: One of many filesystem options, listed below\n" \
- " -r: Mount the filesystem read-only\n" \
- " -t fs-type: Specify the filesystem type\n" \
- " -w: Mount for reading and writing (default)\n" \
+ " -o option One of many filesystem options, listed below\n" \
+ " -r Mount the filesystem read-only\n" \
+ " -t fs-type Specify the filesystem type\n" \
+ " -w Mount for reading and writing (default)\n" \
"\n" \
"Options for use with the \"-o\" flag:\n" \
USE_FEATURE_MOUNT_LOOP( \
- " loop: Ignored (loop devices are autodetected)\n" \
+ " loop Ignored (loop devices are autodetected)\n" \
) \
USE_FEATURE_MOUNT_FLAGS( \
- " [a]sync: Writes are asynchronous / synchronous\n" \
- " [no]atime: Disable / enable updates to inode access times\n" \
- " [no]diratime: Disable / enable atime updates to directories\n" \
- " [no]dev: Allow use of special device files / disallow them\n" \
- " [no]exec: Allow use of executable files / disallow them\n" \
- " [no]suid: Allow set-user-id-root programs / disallow them\n" \
- " [r]shared: Convert [recursively] to a shared subtree\n" \
- " [r]slave: Convert [recursively] to a slave subtree\n" \
- " [r]private: Convert [recursively] to a private subtree\n" \
- " [un]bindable: Make mount point [un]able to be bind mounted\n" \
- " bind: Bind a directory to an additional location\n" \
- " move: Relocate an existing mount point\n" \
+ " [a]sync Writes are asynchronous / synchronous\n" \
+ " [no]atime Disable / enable updates to inode access times\n" \
+ " [no]diratime Disable / enable atime updates to directories\n" \
+ " [no]dev Allow use of special device files / disallow them\n" \
+ " [no]exec Allow use of executable files / disallow them\n" \
+ " [no]suid Allow set-user-id-root programs / disallow them\n" \
+ " [r]shared Convert [recursively] to a shared subtree\n" \
+ " [r]slave Convert [recursively] to a slave subtree\n" \
+ " [r]private Convert [recursively] to a private subtree\n" \
+ " [un]bindable Make mount point [un]able to be bind mounted\n" \
+ " bind Bind a directory to an additional location\n" \
+ " move Relocate an existing mount point\n" \
) \
- " remount: Re-mount a mounted filesystem, changing its flags\n" \
- " ro/rw: Mount for read-only / read-write\n" \
- "\nThere are EVEN MORE flags that are specific to each filesystem\n" \
+ " remount Remount a mounted filesystem, changing its flags\n" \
+ " ro/rw Mount for read-only / read-write\n" \
+ "\n" \
+ "There are EVEN MORE flags that are specific to each filesystem\n" \
"You'll have to see the written documentation for those filesystems"
#define mount_example_usage \
"$ mount\n" \
#define mountpoint_full_usage \
"mountpoint checks if the directory is a mountpoint" \
"\n\nOptions:\n" \
- " -q Be more quiet\n" \
+ " -q Quiet\n" \
" -d Print major/minor device number of the filesystem\n" \
" -x Print major/minor device number of the blockdevice"
#define mountpoint_example_usage \
#define mv_full_usage \
"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
"\n\nOptions:\n" \
- " -f don't prompt before overwriting\n" \
- " -i interactive, prompt before overwrite"
+ " -f Don't prompt before overwriting\n" \
+ " -i Interactive, prompt before overwrite"
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
" or\n" \
"$ nameif -c /etc/my_mactab_file\n" \
+#if !ENABLE_DESKTOP
+
#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
#define NC_OPTIONS_STR "\n\nOptions:"
#else
"Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
NC_OPTIONS_STR \
USE_NC_EXTRA( \
- "\n -e exec rest of command line after connect" \
- "\n -i SECS delay interval for lines sent" \
- "\n -w SECS timeout for connect" \
- "\n -f file use file (ala /dev/ttyS0) instead of network" \
+ "\n -e Exec rest of command line after connect" \
+ "\n -i SECS Delay interval for lines sent" \
+ "\n -w SECS Timeout for connect" \
+ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
) \
USE_NC_SERVER( \
- "\n -l listen mode, for inbound connects" \
+ "\n -l Listen mode, for inbound connects" \
USE_NC_EXTRA( \
"\n (use -l twice with -e for persistent server)") \
- "\n -p PORT local port number" \
+ "\n -p PORT Local port number" \
)
#define nc_notes_usage "" \
"quit\n" \
"221 foobar closing connection\n"
+#else /* DESKTOP nc - much more compatible with nc 1.10 */
+
+#define nc_trivial_usage \
+ "[-options] hostname port - connect" \
+ USE_NC_SERVER("\nnc [-options] -l -p port [hostname] [port] - listen")
+#define nc_full_usage \
+ USE_NC_SERVER( \
+ "-l Listen mode, for inbound connects\n" \
+ ) \
+ "-n Do not do DNS resolution" \
+ "\n-s addr Local address" \
+ "\n-p port Local port" \
+ "\n-u UDP mode" \
+ "\n-v Verbose (cumulative: -vv)" \
+ "\n-w secs Timeout for connects and final net reads" \
+ USE_NC_EXTRA( \
+ "\n-i sec Delay interval for lines sent" /* ", ports scanned" */ \
+ "\n-o file Hex dump of traffic" \
+ "\n-z Zero-I/O mode (scanning)" \
+ ) \
+ "\n-e prog [args] Program to exec after connect (must be last)" \
+/* "\n-r Randomize local and remote ports" */
+/* "\n-g gateway Source-routing hop point[s], up to 8" */
+/* "\n-G num Source-routing pointer: 4, 8, 12, ..." */
+/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
+
+#endif
+
+
#define netstat_trivial_usage \
"[-laenrtuwx]"
#define netstat_full_usage \
"Display networking information" \
"\n\nOptions:\n" \
- " -l display listening server sockets\n" \
- " -a display all sockets (default: connected)\n" \
- " -e display other/more information\n" \
- " -n don't resolve names\n" \
- " -r display routing table\n" \
- " -t tcp sockets\n" \
- " -u udp sockets\n" \
- " -w raw sockets\n" \
- " -x unix sockets"
+ " -l Display listening server sockets\n" \
+ " -a Display all sockets (default: connected)\n" \
+ " -e Display other/more information\n" \
+ " -n Don't resolve names\n" \
+ " -r Display routing table\n" \
+ " -t Tcp sockets\n" \
+ " -u Udp sockets\n" \
+ " -w Raw sockets\n" \
+ " -x Unix sockets"
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG] ...]"
#define nmeter_full_usage \
"Monitor system in real time\n\n" \
"Format specifiers:\n" \
- "%Nc or %[cN] monitor CPU. N - bar size, default 10\n" \
+ "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
" (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
- "%[niface] monitor network interface 'iface'\n" \
- "%m monitor allocated memory\n" \
- "%[mf] monitor free memory\n" \
- "%[mt] monitor total memory\n" \
- "%s monitor allocated swap\n" \
- "%f monitor number of used file descriptors\n" \
- "%Ni monitor total/specific IRQ rate\n" \
- "%x monitor context switch rate\n" \
- "%p monitor forks\n" \
- "%[pn] monitor # of processes\n" \
- "%b monitor block io\n" \
- "%Nt show time (with N decimal points)\n" \
- "%Nd milliseconds between updates (default=1000)\n" \
- "%r print <cr> instead of <lf> at EOL"
+ "%[niface] Monitor network interface 'iface'\n" \
+ "%m Monitor allocated memory\n" \
+ "%[mf] Monitor free memory\n" \
+ "%[mt] Monitor total memory\n" \
+ "%s Monitor allocated swap\n" \
+ "%f Monitor number of used file descriptors\n" \
+ "%Ni Monitor total/specific IRQ rate\n" \
+ "%x Monitor context switch rate\n" \
+ "%p Monitor forks\n" \
+ "%[pn] Monitor # of processes\n" \
+ "%b Monitor block io\n" \
+ "%Nt Show time (with N decimal points)\n" \
+ "%Nd Milliseconds between updates (default=1000)\n" \
+ "%r Print <cr> instead of <lf> at EOL"
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
"changes the password for the current user." \
"\n\nOptions:\n" \
" -a Define which algorithm shall be used for the password\n" \
- " (Choices: des, md5)\n" /* ", sha1)" */ \
+ " (choices: des, md5)\n" /* ", sha1)" */ \
" -d Delete the password for the specified user account\n" \
" -l Locks (disables) the specified user account\n" \
" -u Unlocks (re-enables) the specified user account"
"names on the command line\n" \
USAGE_PIDOF \
USE_FEATURE_PIDOF_SINGLE( \
- "\n -s display only a single PID") \
+ "\n -s Display only a single PID") \
USE_FEATURE_PIDOF_OMIT( \
- "\n -o omit given pid.") \
+ "\n -o Omit given pid") \
USE_FEATURE_PIDOF_OMIT( \
- "\n Use %PPID to omit the parent pid of pidof itself")
+ "\n Use %PPID to omit the parent pid of pidof itself")
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
"host"
#define ping_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts"
+#define ping6_trivial_usage \
+ "host"
+#define ping6_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
"[OPTION]... host"
#define ping_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts" \
"\n\nOptions:\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -I IP Use IP as source address\n" \
- " -q Quiet mode, only displays output at start\n" \
- " and when finished"
+ " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -I iface/IP Use interface or IP address as source\n" \
+ " -q Quiet, only displays output at start\n" \
+ " and when finished"
+#define ping6_trivial_usage \
+ "[OPTION]... host"
+#define ping6_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -I iface/IP Use interface or IP address as source\n" \
+ " -q Quiet, only displays output at start\n" \
+ " and when finished"
#endif
#define ping_example_usage \
"$ ping localhost\n" \
"--- debian ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
-
-#ifndef CONFIG_FEATURE_FANCY_PING6
-#define ping6_trivial_usage \
- "host"
-#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts"
-#else
-#define ping6_trivial_usage \
- "[OPTION]... host"
-#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts" \
- "\n\nOptions:\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -q Quiet mode, only displays output at start\n" \
- " and when finished"
-#endif
#define ping6_example_usage \
"$ ping6 ip6-localhost\n" \
"PING ip6-localhost (::1): 56 data bytes\n" \
"NEW_ROOT PUT_OLD"
#define pivot_root_full_usage \
"Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
- "the new root file system."
+ "the new root file system"
#define poweroff_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define poweroff_full_usage \
"Halt and shut off power" \
"\n\nOptions:\n" \
- " -d delay interval for halting\n" \
- " -n no call to sync()\n" \
- " -f force power off (don't go through init)"
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force power off (don't go through init)"
#define printenv_trivial_usage \
"[VARIABLES...]"
"FORMAT [ARGUMENT...]"
#define printf_full_usage \
"Format and print ARGUMENT(s) according to FORMAT,\n" \
- "where FORMAT controls the output exactly as in C printf."
+ "where FORMAT controls the output exactly as in C printf"
#define printf_example_usage \
"$ printf \"Val=%d\\n\" 5\n" \
"Val=5\n"
#else /* !ENABLE_DESKTOP */
#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
-#define USAGE_PS "\n This version of ps accepts no options."
+#define USAGE_PS "\nThis version of ps accepts no options"
#else
#define USAGE_PS "\nOptions:"
#endif
"Report process status\n" \
USAGE_PS \
USE_SELINUX( \
- "\n -c show SE Linux context") \
+ "\n -Z Show SE Linux context") \
USE_FEATURE_PS_WIDE( \
- "\n w wide output")
+ "\n w Wide output")
#endif /* ENABLE_DESKTOP */
#define readlink_trivial_usage \
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
- "Display the value of a symbolic link" \
+ "Display the value of a symlink" \
USE_FEATURE_READLINK_FOLLOW( \
"\n\nOptions:\n" \
- " -f canonicalize by following all symlinks")
+ " -f Canonicalize by following all symlinks")
#define readprofile_trivial_usage \
"[OPTIONS]..."
#define readprofile_full_usage \
"Options:\n" \
- " -m <mapfile> (default: /boot/System.map)\n" \
- " -p <profile> (default: /proc/profile)\n" \
- " -M <mult> set the profiling multiplier to <mult>\n" \
- " -i print only info about the sampling step\n" \
- " -v print verbose data\n" \
- " -a print all symbols, even if count is 0\n" \
- " -b print individual histogram-bin counts\n" \
- " -s print individual counters within functions\n" \
- " -r reset all the counters (root only)\n" \
- " -n disable byte order auto-detection"
+ " -m <mapfile> (Default: /boot/System.map)\n" \
+ " -p <profile> (Default: /proc/profile)\n" \
+ " -M <mult> Set the profiling multiplier to <mult>\n" \
+ " -i Print only info about the sampling step\n" \
+ " -v Verbose\n" \
+ " -a Print all symbols, even if count is 0\n" \
+ " -b Print individual histogram-bin counts\n" \
+ " -s Print individual counters within functions\n" \
+ " -r Reset all the counters (root only)\n" \
+ " -n Disable byte order auto-detection"
#define realpath_trivial_usage \
"pathname ..."
#define reboot_full_usage \
"Reboot the system" \
"\n\nOptions:\n" \
- " -d delay interval for rebooting\n" \
- " -n no call to sync()\n" \
- " -f force reboot (don't go through init)"
+ " -d Delay interval for rebooting\n" \
+ " -n No call to sync()\n" \
+ " -f Force reboot (don't go through init)"
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
"Change priority of running processes" \
"\n\nOptions:\n" \
- " -n adjusts current nice value (smaller is faster)\n" \
- " -p process id(s) (default)\n" \
- " -g process group id(s)\n" \
- " -u process user name(s) and/or id(s)"
+ " -n Adjusts current nice value (smaller is faster)\n" \
+ " -p Process id(s) (default)\n" \
+ " -g Process group id(s)\n" \
+ " -u Process user name(s) and/or id(s)"
#define reset_trivial_usage \
""
"Remove (unlink) the FILE(s). You may use '--' to\n" \
"indicate that all following arguments are non-options." \
"\n\nOptions:\n" \
- " -i always prompt before removing each destination\n" \
- " -f remove existing destinations, never prompt\n" \
- " -r,-R remove the contents of directories recursively"
+ " -i Always prompt before removing each destination\n" \
+ " -f Remove existing destinations, never prompt\n" \
+ " -r,-R Remove the contents of directories recursively"
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
#define rpm2cpio_full_usage \
"Output a cpio archive of the rpm file"
+#define runcon_trivial_usage \
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
+ " runcon CONTEXT COMMAND [args]"
+#define runcon_full_usage \
+ "runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
+ "runcon CONTEXT COMMAND [args]\n" \
+ "Run a program in a different security context\n\n" \
+ " CONTEXT Complete security context\n" \
+ " -c, --compute Compute process transition context before modifying\n" \
+ " -t, --type=TYPE Type (for same role as parent)\n" \
+ " -u, --user=USER User identity\n" \
+ " -r, --role=ROLE Role\n" \
+ " -l, --range=RNG Levelrange" \
+
#define run_parts_trivial_usage \
- "[-t] [-a ARG] [-u MASK] DIRECTORY"
+ "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
"Run a bunch of scripts in a directory" \
"\n\nOptions:\n" \
" -t Prints what would be run, but does not actually run anything\n" \
" -a ARG Pass ARG as an argument for every program invoked\n" \
- " -u MASK Set the umask to MASK before executing every program"
+ " -u MASK Set the umask to MASK before executing every program" \
+USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when they are not executable")
+
+#define run_parts_example_usage \
+ "$ run-parts -a start /etc/init.d\n" \
+ "$ run-parts -a stop=now /etc/init.d\n\n" \
+ "Let's assume you have a script foo/dosomething:\n" \
+ "#!/bin/sh\n" \
+ "for i in $*; do eval $i; done ; unset i\n" \
+ "case \"$1\" in\n" \
+ "start*) echo starting something ;;\n" \
+ "stop*) set -x ; shutdown -h $stop ;;\n" \
+ "esac\n\n" \
+ "Running this yields:\n" \
+ "$run-parts -a stop=+4m foo/\n" \
+ "+ shutdown -h +4m"
#define runlevel_trivial_usage \
"[utmp]"
"[-efinr] pattern [files...]"
#define sed_full_usage \
"Options:\n" \
- " -e script add the script to the commands to be executed\n" \
- " -f scriptfile add script-file contents to the\n" \
+ " -e script Add the script to the commands to be executed\n" \
+ " -f scriptfile Add script-file contents to the\n" \
" commands to be executed\n" \
- " -i edit files in-place\n" \
- " -n suppress automatic printing of pattern space\n" \
- " -r use extended regular expression syntax\n" \
+ " -i Edit files in-place\n" \
+ " -n Suppress automatic printing of pattern space\n" \
+ " -r Use extended regular expression syntax\n" \
"\n" \
"If no -e or -f is given, the first non-option argument is taken as the sed\n" \
"script to interpret. All remaining arguments are names of input files; if no\n" \
"$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
+#define selinuxenabled_trivial_usage
+#define selinuxenabled_full_usage
+
#define seq_trivial_usage \
"[first [increment]] last"
#define seq_full_usage \
"\n\nOptions:\n" \
" -r Reset output to /dev/console"
+#define setenforce_trivial_usage \
+ "[ Enforcing | Permissive | 1 | 0 ]"
+#define setenforce_full_usage
+
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
"With no FILE, or when FILE is -, read standard input." \
"\n\nOptions:\n" \
USE_FEATURE_MD5_SHA1_SUM_CHECK( \
- " -c check SHA1 sums against given list\n" \
+ " -c Check SHA1 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
- " -s don't output anything, status code shows success\n" \
- " -w warn about improperly formatted SHA1 checksum lines")
+ " -s Don't output anything, status code shows success\n" \
+ " -w Warn about improperly formatted SHA1 checksum lines")
#define sleep_trivial_usage \
USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
- SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds.") \
+ SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \
USE_FEATURE_FANCY_SLEEP( \
"Pause for a time equal to the total of the args given, where each arg can\n" \
- "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
+ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
"Sort lines of text in the specified files" \
"\n\nOptions:\n" \
USE_FEATURE_SORT_BIG( \
- " -b ignore leading blanks\n" \
- " -c check whether input is sorted\n" \
- " -d dictionary order (blank or alphanumeric only)\n" \
- " -f ignore case\n" \
- " -g general numerical sort\n" \
- " -i ignore unprintable characters\n" \
- " -k specify sort key\n" \
- " -M sort month\n") \
- " -n sort numbers\n" \
+ " -b Ignore leading blanks\n" \
+ " -c Check whether input is sorted\n" \
+ " -d Dictionary order (blank or alphanumeric only)\n" \
+ " -f Ignore case\n" \
+ " -g General numerical sort\n" \
+ " -i Ignore unprintable characters\n" \
+ " -k Specify sort key\n" \
+ " -M Sort month\n") \
+ " -n Sort numbers\n" \
USE_FEATURE_SORT_BIG( \
- " -o output to file\n" \
- " -k sort by key\n" \
- " -t use key separator other than whitespace\n") \
- " -r reverse sort order\n" \
+ " -o Output to file\n" \
+ " -k Sort by key\n" \
+ " -t Use key separator other than whitespace\n") \
+ " -r Reverse sort order\n" \
USE_FEATURE_SORT_BIG( \
- " -s stable (don't sort ties alphabetically)\n") \
- " -u suppress duplicate lines" \
+ " -s Stable (don't sort ties alphabetically)\n") \
+ " -u Suppress duplicate lines" \
USE_FEATURE_SORT_BIG( \
- "\n -z input terminated by nulls, not newlines\n") \
+ "\n -z Input terminated by nulls, not newlines\n") \
USE_FEATURE_SORT_BIG( \
- " -mST ignored for GNU compatibility") \
+ " -mST Ignored for GNU compatibility") \
""
#define sort_example_usage \
"$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
) \
""
+#define split_trivial_usage \
+ "[OPTION] [INPUT [PREFIX]]"
+#define split_full_usage \
+ "Options:" \
+ "\n -b n[k|m] Split by bytes" \
+ "\n -l n Split by lines" \
+ "\n -a n Use n letters as suffix"
+#define split_example_usage \
+ "$ split TODO foo\n" \
+ "$ cat TODO | split -a 2 -l 2 TODO_\n"
+
#define start_stop_daemon_trivial_usage \
"[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
"Start and stop services" \
"\n\nOptions:" \
- "\n -S|--start start" \
- "\n -K|--stop stop" \
- "\n -a|--startas <pathname> starts process specified by pathname" \
- "\n -b|--background force process into background" \
- "\n -u|--user <username>|<uid> stop this user's processes" \
- "\n -x|--exec <executable> program to either start or check" \
- "\n -m|--make-pidfile create the -p file and enter pid in it" \
- "\n -n|--name <process-name> stop processes with this name" \
- "\n -p|--pidfile <pid-file> save or load pid using a pid-file" \
- "\n -q|--quiet be quiet" \
+ "\n -S|--start Start" \
+ "\n -K|--stop Stop" \
+ "\n -a|--startas <pathname> Starts process specified by pathname" \
+ "\n -b|--background Force process into background" \
+ "\n -u|--user <username>|<uid> Stop this user's processes" \
+ "\n -x|--exec <executable> Program to either start or check" \
+ "\n -m|--make-pidfile Create the -p file and enter pid in it" \
+ "\n -n|--name <process-name> Stop processes with this name" \
+ "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
+ "\n -q|--quiet Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o|--oknodo exit status 0 if nothing done" \
- "\n -v|--verbose be verbose" \
- "\n -N|--nicelevel <N> add N to process's nice level" \
+ "\n -o|--oknodo Exit status 0 if nothing done" \
+ "\n -v|--verbose Verbose" \
+ "\n -N|--nicelevel <N> Add N to process's nice level" \
) \
- "\n -s|--signal <signal> signal to send (default TERM)" \
- "\n -U|--chuid <username>|<uid> start process with this name"
+ "\n -s|--signal <signal> Signal to send (default TERM)" \
+ "\n -c|--chuid <user>[:[<group>]] Change to specified user/group"
#define stat_trivial_usage \
"[OPTION] FILE..."
"Display file (default) or filesystem status" \
"\n\nOptions:\n" \
USE_FEATURE_STAT_FORMAT( \
- " -c fmt use the specified format\n") \
- " -f display filesystem status\n" \
- " -L,-l dereference links\n" \
- " -t display info in terse form" \
+ " -c fmt Use the specified format\n") \
+ " -f Display filesystem status\n" \
+ " -L,-l Dereference links\n" \
+ " -t Display info in terse form" \
+ USE_SELINUX( \
+ "\n -Z Print security context" \
+ ) \
USE_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
" %h Number of hard links\n" \
" %i Inode number\n" \
" %n File name\n" \
- " %N Quoted file name with dereference if symbolic link\n" \
+ " %N Quoted file name with dereference if symlink\n" \
" %o I/O block size\n" \
" %s Total size, in bytes\n" \
" %t Major device type in hex\n" \
" %c Total file nodes in file system\n" \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
+ USE_SELINUX( \
+ " %C Security context in SELinux\n" \
+ ) \
" %i File System ID in hex\n" \
" %l Maximum length of filenames\n" \
" %n File name\n" \
- " %s Block size (for faster transfers)\n" \
+ " %s Block size (for faster transfer)\n" \
" %S Fundamental block size (for block counts)\n" \
" %t Type in hex\n" \
" %T Type in human readable form" \
#define strings_full_usage \
"Display printable strings in a binary file" \
"\n\nOptions:" \
- "\n -a Scan the whole files (this is the default)." \
- "\n -f Precede each string with the name of the file where it was found." \
+ "\n -a Scan the whole files (this is the default)" \
+ "\n -f Precede each string with the name of the file where it was found" \
"\n -n N Specifies that at least N characters forms a sequence (default 4)" \
"\n -o Each string is preceded by its decimal offset in the file"
"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
"Without arguments, prints baud rate, line discipline,\n" \
- "and deviations from stty sane." \
+ "and deviations from stty sane" \
"\n\nOptions:" \
- "\n -F DEVICE open device instead of stdin" \
- "\n -a print all current settings in human-readable form" \
- "\n -g print in stty-readable form" \
- "\n [SETTING] see manpage"
+ "\n -F DEVICE Open device instead of stdin" \
+ "\n -a Print all current settings in human-readable form" \
+ "\n -g Print in stty-readable form" \
+ "\n [SETTING] See manpage"
#define su_trivial_usage \
"[OPTION]... [-] [username]"
#define sum_full_usage \
"Checksum and count the blocks in a file" \
"\n\nOptions:\n" \
- " -r use BSD sum algorithm (1K blocks)\n" \
- " -s use System V sum algorithm (512byte blocks)"
+ " -r Use BSD sum algorithm (1K blocks)\n" \
+ " -s Use System V sum algorithm (512byte blocks)"
#define sv_trivial_usage \
"[-v] [-w sec] command service..."
"System logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf." \
"\n\nOptions:" \
- "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
- "\n -n Run as a foreground process" \
- "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
- "\n -l n Sets the local log level of messages to n" \
- "\n -S Make logging output smaller" \
+ "\n -n Run as foreground process" \
+ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
+ "\n -l n Sets the local log level of messages to n" \
+ "\n -S Make logging output smaller" \
USE_FEATURE_ROTATE_LOGFILE( \
- "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
- "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
+ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
+ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
USE_FEATURE_REMOTE_LOG( \
"\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
- "\n -L Log locally and via network logging (default is network only)") \
+ "\n -L Log locally and via network logging (default is network only)") \
USE_FEATURE_IPC_SYSLOG( \
- "\n -C [size(KiB)] Log to a circular buffer (read the buffer using logread)")
+ "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
+ /* NB: -Csize shouldn't have space (because size is optional) */
+/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
"file name. With no FILE, or when FILE is -, read standard input." \
"\n\nOptions:" \
USE_FEATURE_FANCY_TAIL( \
- "\n -c N[kbm] output the last N bytes") \
- "\n -n N[kbm] print last N lines instead of last 10" \
- "\n -f output data as the file grows" \
+ "\n -c N[kbm] Output the last N bytes") \
+ "\n -n N[kbm] Print last N lines instead of last 10" \
+ "\n -f Output data as the file grows" \
USE_FEATURE_FANCY_TAIL( \
- "\n -q never output headers giving file names" \
- "\n -s SEC wait SEC seconds between reads with -f" \
- "\n -v always output headers giving file names" \
+ "\n -q Never output headers giving file names" \
+ "\n -s SEC Wait SEC seconds between reads with -f" \
+ "\n -v Always output headers giving file names" \
"\n\n" \
"If the first character of N (bytes or lines) is a '+', output begins with\n" \
"the Nth item from the start of each file, otherwise, print the last N items\n" \
"Create, extract, or list files from a tar file" \
"\n\nOptions:\n" \
USE_FEATURE_TAR_CREATE( \
- " c create\n") \
- " x extract\n" \
- " t list\n" \
+ " c Create\n") \
+ " x Extract\n" \
+ " t List\n" \
"\nArchive format selection:\n" \
USE_FEATURE_TAR_GZIP( \
" z Filter the archive through gzip\n") \
USE_FEATURE_TAR_COMPRESS( \
" Z Filter the archive through compress\n") \
"\nFile selection:\n" \
- " f name of TARFILE or \"-\" for stdin\n" \
- " O extract to stdout\n" \
+ " f Name of TARFILE or \"-\" for stdin\n" \
+ " O Extract to stdout\n" \
USE_FEATURE_TAR_FROM( \
- " exclude file to exclude\n" \
- " X file with names to exclude\n") \
- " C change to directory DIR before operation\n" \
- " v verbosely list files processed"
+ " exclude File to exclude\n" \
+ " X File with names to exclude\n") \
+ " C Change to directory DIR before operation\n" \
+ " v Verbose"
#define tar_example_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_full_usage \
"Set or get CPU affinity" \
"\n\nOptions:\n" \
- " -p operate on an existing PID"
+ " -p Operate on an existing PID"
#define taskset_example_usage \
"$ taskset 0x7 ./dgemm_test&\n" \
"$ taskset -p 0x1 $!\n" \
#define tee_full_usage \
"Copy standard input to each FILE, and also to standard output" \
"\n\nOptions:\n" \
- " -a append to the given FILEs, do not overwrite\n" \
- " -i ignore interrupt signals (SIGINT)"
+ " -a Append to the given FILEs, do not overwrite\n" \
+ " -i Ignore interrupt signals (SIGINT)"
#define tee_example_usage \
"$ echo \"Hello\" | tee /tmp/foo\n" \
"$ cat /tmp/foo\n" \
"Handle incoming telnet connections" \
SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
"\n\nOptions:" \
- "\n -l LOGIN exec LOGIN on connect" \
+ "\n -l LOGIN Exec LOGIN on connect" \
"\n -f issue_file Display issue_file instead of /etc/issue" \
USE_FEATURE_TELNETD_STANDALONE( \
- "\n -p PORT port to listen to" \
- "\n -b ADDR address to bind to" \
- "\n -F stay in foreground" \
- "\n -i run as inetd subservice" \
+ "\n -p PORT Port to listen to" \
+ "\n -b ADDR Address to bind to" \
+ "\n -F Stay in foreground" \
+ "\n -i Run as inetd subservice" \
)
#define test_trivial_usage \
"$ echo $?\n" \
"1\n"
+#define tcpsvd_trivial_usage \
+ "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..."
+/* with not-implemented options: */
+/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [ -t sec] ip port prog..." */
+#define tcpsvd_full_usage \
+ "Creates TCP socket, binds it to ip:port and listens on it\n" \
+ "for incoming connections. For each connection it runs prog." \
+ "\n" \
+ "\nip IP to listen on. '0' = all" \
+ "\nport Port to listen on" \
+ "\nprog [arg] Program to run" \
+ "\n-l name Local hostname (else looks up local hostname in DNS)" \
+ "\n-u user[:group] Change to user/group after bind" \
+ "\n-c n Handle up to n connections simultaneously" \
+ "\n-b n Allow a backlog of approximately n TCP SYNs" \
+ "\n-C n[:msg] Allow only up to n connections from the same IP" \
+ "\n New connections from this IP address are closed" \
+ "\n immediately. 'msg' is written to the peer before close" \
+ "\n-h Look up peer's hostname" \
+ "\n-E Do not set up environment variables" \
+ "\n-v Verbose"
+
+#define udpsvd_trivial_usage \
+ "[-hEv] [-c n] [-u user] [-l name] ip port prog"
+#define udpsvd_full_usage \
+ "Creates UDP socket, binds it to ip:port and listens on it\n" \
+ "for incoming packets. For each packet it runs prog\n" \
+ "(redirecting all further packets with same peer ip:port to it)." \
+ "\n" \
+ "\nip IP to listen on. '0' = all" \
+ "\nport Port to listen on" \
+ "\nprog [arg] Program to run" \
+ "\n-l name Local hostname (else looks up local hostname in DNS)" \
+ "\n-u user[:group] Change to user/group after bind" \
+ "\n-c n Handle up to n connections simultaneously" \
+ "\n-h Look up peer's hostname" \
+ "\n-E Do not set up environment variables" \
+ "\n-v Verbose"
+
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
"Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
"COMMAND's resource usage information is displayed." \
"\n\nOptions:\n" \
- " -v Displays verbose resource usage information"
+ " -v Verbose"
#define top_trivial_usage \
"[-b] [-n count] [-d seconds]"
"Translate, squeeze, and/or delete characters from\n" \
"standard input, writing to standard output" \
"\n\nOptions:\n" \
- " -c take complement of STRING1\n" \
- " -d delete input characters coded STRING1\n" \
- " -s squeeze multiple output characters of STRING2 into one character"
+ " -c Take complement of STRING1\n" \
+ " -d Delete input characters coded STRING1\n" \
+ " -s Squeeze multiple output characters of STRING2 into one character"
#define tr_example_usage \
"$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
"hello world\n"
" -d Set SO_DEBUG options to socket\n" \
" -n Print hop addresses numerically rather than symbolically\n" \
" -r Bypass the normal routing tables and send directly to a host\n" \
- " -v Verbose output\n" \
- " -m max_ttl Set the max time-to-live (max number of hops)\n" \
- " -p port# Set the base UDP port number used in probes\n" \
+ " -v Verbose\n" \
+ " -m max_ttl Max time-to-live (max number of hops)\n" \
+ " -p port# Base UDP port number used in probes\n" \
" (default is 33434)\n" \
- " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \
- " (default is 3)\n" \
- " -s src_addr Use the following IP address as the source address\n" \
- " -t tos Set the type-of-service in probe packets to the following value\n" \
- " (default 0)\n" \
- " -w wait Set the time (in seconds) to wait for a response to a probe\n" \
+ " -q nqueries Number of probes per 'ttl' (default 3)\n" \
+ " -s src_addr IP address to use as the source address\n" \
+ " -t tos Type-of-service in probe packets (default 0)\n" \
+ " -w wait Time in seconds to wait for a response to a probe\n" \
" (default 3 sec)\n" \
- " -g Specify a loose source route gateway (8 maximum)"
+ " -g Specify a loose source route gateway (8 max)"
#define true_trivial_usage \
""
#define tty_full_usage \
"Print the file name of the terminal connected to standard input" \
+ USE_INCLUDE_SUSv2( \
"\n\nOptions:\n" \
- " -s print nothing, only return an exit status"
+ " -s Print nothing, only return an exit status")
#define tty_example_usage \
"$ tty\n" \
"/dev/tty2\n"
#define umount_full_usage \
"Unmount file systems" \
"\n\nOptions:\n" \
- "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ USE_FEATURE_UMOUNT_ALL( \
+ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \
USE_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries") \
"\n -r Try to remount devices as read-only if mount is busy" \
#define uname_full_usage \
"Print certain system information. With no OPTION, same as -s." \
"\n\nOptions:\n" \
- " -a print all information\n" \
- " -m the machine (hardware) type\n" \
- " -n print the machine's network node hostname\n" \
- " -r print the operating system release\n" \
- " -s print the operating system name\n" \
- " -p print the host processor type\n" \
- " -v print the operating system version"
+ " -a Print all information\n" \
+ " -m The machine (hardware) type\n" \
+ " -n Print the machine's network node hostname\n" \
+ " -r Print the operating system release\n" \
+ " -s Print the operating system name\n" \
+ " -p Print the host processor type\n" \
+ " -v Print the operating system version"
#define uname_example_usage \
"$ uname -a\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_full_usage \
"Uncompress .Z file[s]" \
"\n\nOptions:\n" \
- " -c extract to stdout\n" \
- " -f force overwrite an existing file"
+ " -c Extract to stdout\n" \
+ " -f Force overwrite an existing file"
#define uniq_trivial_usage \
"[-fscdu]... [INPUT [OUTPUT]]"
"Discard all but one of successive identical lines from INPUT\n" \
"(or standard input), writing to OUTPUT (or standard output)" \
"\n\nOptions:\n" \
- " -c prefix lines by the number of occurrences\n" \
- " -d only print duplicate lines\n" \
- " -u only print unique lines\n" \
- " -f N skip the first N fields\n" \
- " -s N skip the first N chars (after any skipped fields)"
+ " -c Prefix lines by the number of occurrences\n" \
+ " -d Only print duplicate lines\n" \
+ " -u Only print unique lines\n" \
+ " -f N Skip the first N fields\n" \
+ " -s N Skip the first N chars (after any skipped fields)"
#define uniq_example_usage \
"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
"a\n" \
#define unix2dos_full_usage \
"Convert FILE from unix format to dos format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
- "When no file is given, use stdin for input and stdout for output." \
+ "When no file is given, use stdin/stdout." \
"\n\nOptions:\n" \
- " -u output will be in UNIX format\n" \
- " -d output will be in DOS format"
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
"Extract files from ZIP archives" \
"\n\nOptions:\n" \
- " -l list archive contents (short form)\n" \
- " -n never overwrite existing files (default)\n" \
- " -o overwrite files without prompting\n" \
- " -p send output to stdout\n" \
- " -q be quiet\n" \
- " -x exclude these files\n" \
- " -d extract files into this directory"
+ " -l List archive contents (short form)\n" \
+ " -n Never overwrite existing files (default)\n" \
+ " -o Overwrite files without prompting\n" \
+ " -p Send output to stdout\n" \
+ " -q Quiet\n" \
+ " -x Exclude these files\n" \
+ " -d Extract files into this directory"
#define uptime_trivial_usage \
""
#define uudecode_full_usage \
"Uudecode a file" \
"\n\nOptions:\n" \
- " -o FILE direct output to FILE"
+ " -o FILE Direct output to FILE"
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
"$ ls -l busybox\n" \
#define uuencode_full_usage \
"Uuencode a file" \
"\n\nOptions:\n" \
- " -m use base64 encoding per RFC1521"
+ " -m Use base64 encoding per RFC1521"
#define uuencode_example_usage \
"$ uuencode busybox busybox\n" \
"begin 755 busybox\n" \
#define vconfig_full_usage \
"Create and remove virtual ethernet devices" \
"\n\nOptions:\n" \
- " add [interface-name] [vlan_id]\n" \
- " rem [vlan-name]\n" \
- " set_flag [interface-name] [flag-num] [0 | 1]\n" \
- " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_name_type [name-type]"
+ " add [interface-name] [vlan_id]\n" \
+ " rem [vlan-name]\n" \
+ " set_flag [interface-name] [flag-num] [0 | 1]\n" \
+ " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_name_type [name-type]"
#define vi_trivial_usage \
"[OPTION] [FILE]..."
"Print line, word, and byte counts for each FILE, and a total line if\n" \
"more than one FILE is specified. With no FILE, read standard input." \
"\n\nOptions:\n" \
- " -c print the byte counts\n" \
- " -l print the newline counts\n" \
- " -L print the length of the longest line\n" \
- " -w print the word counts"
+ " -c Print the byte counts\n" \
+ " -l Print the newline counts\n" \
+ " -L Print the length of the longest line\n" \
+ " -w Print the word counts"
#define wc_example_usage \
"$ wc /etc/passwd\n" \
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url"
#define wget_full_usage \
"Retrieve files via HTTP or FTP" \
"\n\nOptions:\n" \
- " -c continue retrieval of aborted transfers\n" \
- " -q quiet mode - do not print\n" \
+ " -s Spider mode - only check file existence\n" \
+ " -c Continue retrieval of aborted transfer\n" \
+ " -q Quiet\n" \
" -P Set directory prefix to DIR\n" \
- " -O save to filename ('-' for stdout)\n" \
- " -U adjust 'User-Agent' field\n" \
- " -Y use proxy ('on' or 'off')"
+ " -O Save to filename ('-' for stdout)\n" \
+ " -U Adjust 'User-Agent' field\n" \
+ " -Y Use proxy ('on' or 'off')"
#define which_trivial_usage \
"[COMMAND ...]"
#define zcip_full_usage \
"Manage a ZeroConf IPv4 link-local address" \
"\n\nOptions:\n" \
- " -f foreground mode\n" \
- " -q quit after address (no daemon)\n" \
- " -r 169.254.x.x request this address first\n" \
- " -v verbose"
+ " -f Foreground mode\n" \
+ " -q Quit after address (no daemon)\n" \
+ " -r 169.254.x.x Request this address first\n" \
+ " -v Verbose"
#endif /* __BB_USAGE_H__ */