#define __BB_USAGE_H__
#define addgroup_trivial_usage \
- "[-g GID] group_name [user_name]"
+ "[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name"
#define addgroup_full_usage \
- "Add a group to the system" \
+ "Add a group to the system"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \
"\n\nOptions:\n" \
" -g GID Specify gid"
"Read and optionally set system timebase parameters.\n" \
"See adjtimex(2)." \
"\n\nOptions:\n" \
- " -q Quiet mode - do not print\n" \
+ " -q Quiet\n" \
" -o offset Time offset, microseconds\n" \
" -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
" (positive values make the system clock run fast)\n" \
" -p Extract to stdout\n" \
" -t List\n" \
" -x Extract\n" \
- " -v Verbosely list files processed"
+ " -v Verbose"
+
+#define arp_trivial_usage \
+ "\n" \
+ "[-vn] [-H type] [-i if] -a [hostname]\n" \
+ "[-v] [-i if] -d hostname [pub]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
+ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
+#define arp_full_usage \
+ "Manipulate the system ARP cache" \
+ "\n\nOptions:" \
+ "\n -a Display (all) hosts" \
+ "\n -s Set a new ARP entry" \
+ "\n -d Delete a specified entry" \
+ "\n -v Verbose" \
+ "\n -n Don't resolve names" \
+ "\n -i if Specify network interface (e.g. eth0)" \
+ "\n -D Read <hwaddr> from given device" \
+ "\n -A, -p Specify protocol family" \
+ "\n -H hwtype Specify hardware address type"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
"Ping hosts by ARP requests/replies" \
"\n\nOptions:\n" \
" -f Quit on first ARP reply\n" \
- " -q Be quiet\n" \
+ " -q Quiet\n" \
" -b Keep broadcasting, don't go unicast\n" \
" -D Duplicated address detection mode\n" \
" -U Unsolicited ARP mode, update your neighbours\n" \
"[-jy] [[month] year]"
#define cal_full_usage \
"Display a calendar" \
- "\n\nOptions:\n" \
- " -j Use julian dates\n" \
- " -y Display the entire year"
+ "\n\nOptions:" \
+ "\n -j Use julian dates" \
+ "\n -y Display the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
"Concatenate FILE(s) and print them to stdout" \
- "\n\nOptions:\n" \
- " -u Ignored since unbuffered i/o is always used"
+ "\n\nOptions:" \
+ "\n -u Ignored since unbuffered i/o is always used"
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
" S Write file contents synchronously\n" \
" t Disable tail-merging of partial blocks with other files\n" \
" u Allow file to be undeleted\n" \
- " Options:\n" \
+ "Options:\n" \
" -R Recursively list subdirectories\n" \
" -v Set the file's version/generation number"
-#define chgrp_trivial_usage \
- "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
-#define chgrp_full_usage \
- "Change the group membership of each FILE to GROUP" \
- "\n\nOptions:\n" \
- " -R Changes files and directories recursively\n" \
- " -h Do not dereference symbolic links" \
- USE_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
- )
-#define chgrp_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chgrp root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+#define chcon_trivial_usage \
+ "[OPTIONS] CONTEXT FILE...\n" \
+ " chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" \
+ " chcon [OPTIONS] --reference=RFILE FILE...\n"
+#define chcon_full_usage \
+ "Change the security context of each FILE to CONTEXT\n" \
+ "\n -v, --verbose Verbose" \
+ "\n -c, --changes Report changes made" \
+ "\n -h, --no-dereference Affect symlinks instead of their targets" \
+ "\n -f, --silent, --quiet Suppress most error messages" \
+ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
+ "\n -u, --user=USER Set user USER in the target security context" \
+ "\n -r, --role=ROLE Set role ROLE in the target security context" \
+ "\n -t, --type=TYPE Set type TYPE in the target security context" \
+ "\n -l, --range=RANGE Set range RANGE in the target security context" \
+ "\n -R, --recursive Recurse subdirectories" \
#define chmod_trivial_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+#define chgrp_trivial_usage \
+ "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
+#define chgrp_full_usage \
+ "Change the group membership of each FILE to GROUP" \
+ "\n\nOptions:" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
+ USE_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v Verbose" \
+ "\n -f Hide errors" \
+ )
+#define chgrp_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chgrp root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+
#define chown_trivial_usage \
- "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
"Change the owner and/or group of each FILE to OWNER and/or GROUP" \
"\n\nOptions:" \
- "\n -R Changes files and directories recursively" \
- "\n -h Do not dereference symbolic links" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"Change the process state and run specified program" \
"\n\nOptions:\n" \
" -u user[:grp] Set uid and gid\n" \
- " -U user[:grp] Set environment variables UID and GID\n" \
+ " -U user[:grp] Set environment variables UID and GID\n" \
" -e dir Set environment variables as specified by files\n" \
" in the directory: file=1st_line_of_file\n" \
" -/ dir Chroot to dir\n" \
"Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
#define cmp_full_usage \
"Compares FILE1 vs stdin if FILE2 is not specified" \
"\n\nOptions:\n" \
" -l Write the byte numbers (decimal) and values (octal)\n" \
" for all differing bytes\n" \
- " -s Quiet mode - do not print"
+ " -s Quiet"
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define bbsh_full_usage \
"The bbsh shell (command interpreter)"
+#define chrt_trivial_usage \
+ "[OPTION]... [prio] [pid | command [arg]...]"
+#define chrt_full_usage \
+ "manipulate real-time attributes of a process" \
+ "\n\nOptions:\n" \
+ " -p operate on pid\n" \
+ " -r set scheduling policy to SCHED_RR\n" \
+ " -f set scheduling policy to SCHED_FIFO\n" \
+ " -o set scheduling policy to SCHED_OTHER\n" \
+ " -m show min and max priorities"
+
+#define chrt_example_usage \
+ "$ chrt -r 4 sleep 900 ; x=$!\n" \
+ "$ chrt -f -p 3 $x\n" \
+ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
+
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
#define cp_full_usage \
"Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
- "\n\nOptions:\n" \
- " -a Same as -dpR\n" \
- " -d,-P Preserve links\n" \
- " -H,-L Dereference all symlinks (implied by default)\n" \
- " -p Preserve file attributes if possible\n" \
- " -f Force, overwrite\n" \
- " -i Interactive, prompt before overwrite\n" \
- " -R,-r Copy directories recursively\n" \
- " -l,-s Create (sym)links"
+ "\n\nOptions:" \
+ "\n -a Same as -dpR" \
+ USE_SELINUX( \
+ "\n -c Preserves security context" \
+ ) \
+ "\n -d,-P Preserve links" \
+ "\n -H,-L Dereference all symlinks (default)" \
+ "\n -p Preserve file attributes if possible" \
+ "\n -f Force overwrite" \
+ "\n -i Prompt before overwrite" \
+ "\n -R,-r Recurse directories" \
+ "\n -l,-s Create (sym)links"
#define cpio_trivial_usage \
"-[dimtuv][F cpiofile]"
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
- "GROUP"
+ USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
#define delgroup_full_usage \
- "Delete group GROUP from the system"
+ "Delete group GROUP from the system" \
+ USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
" -L Use LABEL instead of the filename in the unified header\n" \
" -N Treat absent files as empty\n" \
" -q Output only whether files differ\n" \
- " -r Recursively compare any subdirectories\n" \
+ " -r Recursively compare subdirectories\n" \
" -S Start with FILE when comparing directories\n" \
" -T Make tabs line up by prefixing a tab when necessary\n" \
" -s Report when two files are the same\n" \
" -c Config filename\n" \
" -t TTL in seconds\n" \
" -p Listening port\n" \
- " -i Listening iface ip (default all)\n" \
+ " -i Listening ip (default all)\n" \
" -d Daemonize"
#define dos2unix_trivial_usage \
" bytes." \
"\n\nOptions:\n" \
" -a Show sizes of files in addition to directories\n" \
- " -H Follow symbolic links that are FILE command line args\n" \
- " -L Follow all symbolic links encountered\n" \
+ " -H Follow symlinks that are FILE command line args\n" \
+ " -L Follow all symlinks encountered\n" \
" -d N Limit output to directories (and files with -a) of depth < N\n" \
" -c Output a grand total\n" \
" -l Count sizes many times if hard linked\n" \
" -y Assume 'yes' to all questions\n" \
" -c Check for bad blocks and add them to the badblock list\n" \
" -f Force checking even if filesystem is marked clean\n" \
- " -v Be verbose\n" \
+ " -v Verbose\n" \
" -b superblock Use alternative superblock\n" \
" -B blocksize Force blocksize when looking for superblock\n" \
" -j journal Set location of the external journal\n" \
"of characters matched or 0."
#define fakeidentd_trivial_usage \
- "[-b ip] [STRING]"
+ "[-fiw] [-b ADDR] [STRING]"
#define fakeidentd_full_usage \
- "Return a set string to auth requests" \
- "\n\nOptions:\n" \
- " -b Bind to ip address\n" \
- " STRING The ident answer string (default is nobody)"
+ "Provide fake ident (auth) service" \
+ "\n\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -i Inetd mode" \
+ "\n -w Inetd 'wait' mode" \
+ "\n -b ADDR Bind to specified address" \
+ "\n STRING Ident answer string (default is 'nobody')"
#define false_trivial_usage \
""
"Search for files in a directory hierarchy. The default PATH is\n" \
"the current directory; default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:\n" \
- " -follow Dereference symbolic links\n" \
+ " -follow Dereference symlinks\n" \
" -name PATTERN File name (leading directories removed) matches PATTERN\n" \
" -print Print (default and assumed)" \
USE_FEATURE_FIND_PRINT0( \
) USE_FEATURE_FIND_EXEC( \
"\n -exec CMD Execute CMD with all instances of {} replaced by the" \
"\n files matching EXPRESSION" \
- ) USE_DESKTOP( \
+ ) USE_FEATURE_FIND_USER( \
+ "\n -user NAME File is owned by user NAME (numeric user ID allowed)" \
+ ) USE_FEATURE_FIND_GROUP( \
+ "\n -group NAME File belongs to group NAME (numeric group ID allowed)" \
+ ) USE_FEATURE_FIND_DEPTH( \
+ "\n -depth Process directory after traversing it" \
+ ) USE_FEATURE_FIND_SIZE( \
"\n -size N File size is N" \
+ ) USE_FEATURE_FIND_PRUNE( \
"\n -prune Stop traversing current subtree" \
- "\n (expr) Group" \
+ ) USE_FEATURE_FIND_DELETE( \
+ "\n -delete Delete files; Turns on -depth option" \
+ ) USE_FEATURE_FIND_PATH( \
+ "\n -path Path matches PATTERN" \
+ ) USE_FEATURE_FIND_PAREN( \
+ "\n (EXPR) Group an expression" \
)
#define find_example_usage \
" -6 When using port/proto only search IPv6 space\n" \
" -SIGNAL When used with -k, this signal will be used to kill"
+#define getenforce_trivial_usage
+#define getenforce_full_usage
+
#define getopt_trivial_usage \
"[OPTIONS]..."
#define getopt_full_usage \
" esac\n" \
"done\n"
+#define getsebool_trivial_usage \
+ "-a or getsebool boolean..."
+#define getsebool_full_usage \
+ " -a Show all SELinux booleans"
+
#define getty_trivial_usage \
"[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
" -H login_host Log login_host into the utmp file as the hostname"
#define grep_trivial_usage \
- "[-rihHnqvso" \
+ "[-HhrilLnqvso" \
+ USE_DESKTOP("w") \
+ "eF" \
USE_FEATURE_GREP_EGREP_ALIAS("E") \
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
#define grep_full_usage \
"Search for PATTERN in each FILE or standard input" \
- "\n\nOptions:\n" \
- " -H Prefix output lines with filename where match was found\n" \
- " -h Suppress the prefixing filename on output\n" \
- " -r Recurse subdirectories\n" \
- " -i Ignore case distinctions\n" \
- " -l List names of files that match\n" \
- " -L List names of files that do not match\n" \
- " -n Print line number with output lines\n" \
- " -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
- " -v Select non-matching lines\n" \
- " -s Suppress file open/read error messages\n" \
- " -c Only print count of matching lines\n" \
- " -f Read PATTERN from file\n" \
- " -o Show only the part of a line that matches PATTERN\n" \
- " -e PATTERN is a regular expression\n" \
- " -F PATTERN is a set of newline-separated strings" \
+ "\n\nOptions:" \
+ "\n -H Prefix output lines with filename where match was found" \
+ "\n -h Suppress the prefixing filename on output" \
+ "\n -r Recurse subdirectories" \
+ "\n -i Ignore case distinctions" \
+ "\n -l List names of files that match" \
+ "\n -L List names of files that do not match" \
+ "\n -n Print line number with output lines" \
+ "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \
+ "\n -v Select non-matching lines" \
+ "\n -s Suppress file open/read error messages" \
+ "\n -c Only print count of matching lines" \
+ "\n -f Read PATTERN from file" \
+ "\n -o Show only the part of a line that matches PATTERN" \
+ USE_DESKTOP( \
+ "\n -w Match whole words only") \
+ "\n -e PATTERN is a regular expression" \
+ "\n -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
USE_FEATURE_GREP_CONTEXT( \
- "\n -A Print NUM lines of trailing context") \
- USE_FEATURE_GREP_CONTEXT( \
- "\n -B Print NUM lines of leading context") \
- USE_FEATURE_GREP_CONTEXT( \
- "\n -C Print NUM lines of output context")
+ "\n -A Print NUM lines of trailing context" \
+ "\n -B Print NUM lines of leading context" \
+ "\n -C Print NUM lines of output context") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
" -d STRING URL decode STRING"
#define hwclock_trivial_usage \
- "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
+ "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
+ " [-l|--localtime] [-u|--utc]" \
+ " [-f FILE]"
#define hwclock_full_usage \
- "Query and set the hardware clock (RTC)" \
+ "Query and set a hardware clock (RTC)" \
"\n\nOptions:\n" \
" -r Read hardware clock and print result\n" \
" -s Set the system time from the hardware clock\n" \
" -w Set the hardware clock to the current system time\n" \
" -u The hardware clock is kept in coordinated universal time\n" \
- " -l The hardware clock is kept in local time"
+ " -l The hardware clock is kept in local time\n" \
+ " -f FILE Use the specified clock (e.g. /dev/rtc2)"
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
"Print information for USERNAME or the current user" \
"\n\nOptions:\n" \
USE_SELINUX( \
- " -c Prints only the security context\n") \
+ " -Z prints only the security context\n" \
+ ) \
" -g Prints only the group ID\n" \
" -u Prints only the user ID\n" \
" -n Print a name instead of a number\n" \
#define inetd_full_usage \
"Listen for network connections and launch programs" \
"\n\nOptions:\n" \
- " -f Run as a foreground progress\n" \
- " -q Sets the size of the socket listen queue to\n" \
- " the specified value. Default is 128"
+ " -f Run in foreground\n" \
+ " -q N Set the size of the socket listen queue to N\n" \
+ " (default: 128)"
#define init_trivial_usage \
""
"\n\nOptions:\n" \
" -f Force module to load into the wrong kernel version\n" \
" -k Make module autoclean-able\n" \
- " -v Verbose output\n" \
- " -q Quiet output\n" \
+ " -v Verbose\n" \
+ " -q Quiet\n" \
" -L Lock to prevent simultaneous loads of a module\n" \
USE_FEATURE_INSMOD_LOAD_MAP( \
" -m Output load map to stdout\n") \
" -m Set permission modes\n" \
" -o Set ownership\n" \
" -p Preserve date\n" \
- " -s Strip symbol tables"
-
+ " -s Strip symbol tables" \
+ USE_SELINUX( \
+ "\n -Z Set security context of copy" \
+ )
+/* would need to make the " | " optional depending on more than one selected */
#define ip_trivial_usage \
- "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}"
+ "[OPTIONS] {" \
+ USE_FEATURE_IP_ADDRESS("address | ") \
+ USE_FEATURE_IP_ROUTE("route | ") \
+ USE_FEATURE_IP_LINK("link | ") \
+ USE_FEATURE_IP_TUNNEL("tunnel | ") \
+ USE_FEATURE_IP_RULE("rule") \
+ "} {COMMAND}"
#define ip_full_usage \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
- "where OBJECT := {link | addr | route | tunnel |rule}\n" \
+ "where OBJECT := {" \
+ USE_FEATURE_IP_ADDRESS("address | ") \
+ USE_FEATURE_IP_ROUTE("route | ") \
+ USE_FEATURE_IP_LINK("link | ") \
+ USE_FEATURE_IP_TUNNEL("tunnel | ") \
+ USE_FEATURE_IP_RULE("rule") \
+ "}\n" \
"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
- "iplink set DEVICE { up | down | arp { on | off } |\n" \
+ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
"iplink show [ DEVICE ]"
"Kernel logger" \
"\n\nOptions:\n" \
" -c n Sets the default log level of console messages to n\n" \
- " -n Run as a foreground process"
+ " -n Run as foreground process"
#define length_trivial_usage \
"STRING"
"Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
"You may use '--' to indicate that all following arguments are non-options." \
"\n\nOptions:\n" \
- " -s Make symbolic links instead of hard links\n" \
+ " -s Make symlinks instead of hardlinks\n" \
" -f Remove existing destination files\n" \
" -n No dereference symlinks - treat like normal file\n" \
" -b Make a backup of the target (if exists) before link operation\n" \
"$ ls -l /tmp/ls\n" \
"lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
+#define load_policy_trivial_usage \
+ "[FILE]"
+#define load_policy_full_usage
+
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage \
#define ls_trivial_usage \
"[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
- USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
+ USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
USE_FEATURE_LS_FILETYPES( \
"\n -p Append indicator (one of /=@|) to entries") \
USE_FEATURE_LS_FOLLOWLINKS( \
- "\n -L List entries pointed to by symbolic links") \
+ "\n -L List entries pointed to by symlinks") \
USE_FEATURE_LS_RECURSIVE( \
"\n -R List subdirectories recursively") \
USE_FEATURE_LS_SORTFILES( \
USE_SELINUX( \
"\n -k Print security context") \
USE_SELINUX( \
- "\n -K Print security context in long format")
+ "\n -K Print security context in long format") \
+ USE_SELINUX( \
+ "\n -Z Print security context and permission")
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
"/dev/hda[0-15]\n"
#endif
+#define matchpathcon_trivial_usage \
+ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
+#define matchpathcon_full_usage \
+ " -n Do not display path" \
+ "\n -N Do not use translations" \
+ "\n -f Use alternate file_context file" \
+ "\n -p Use prefix to speed translations" \
+ "\n -V Verify file context on disk matches defaults"
+
#define md5sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
"Create the DIRECTORY(ies) if they do not already exist" \
"\n\nOptions:\n" \
" -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
- " -p No error if existing, make parent directories as needed"
+ " -p No error if existing, make parent directories as needed" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
#define mkdir_example_usage \
"$ mkdir /tmp/foo\n" \
"$ mkdir /tmp/foo\n" \
" -N num Number of inodes to create\n" \
" -o os Set the 'creator os' field\n" \
" -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
- " -q Quiet execution\n" \
+ " -q Quiet\n" \
" -r rev Set filesystem revision\n" \
" -S Write superblock and group descriptors only\n" \
" -T fs-type Set usage type (news/largefile/largefile4)\n" \
- " -v Verbose execution"
+ " -v Verbose"
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage \
"Create a named pipe (identical to 'mknod name p')" \
"\n\nOptions:\n" \
- " -m Create the pipe using the specified mode (default a=rw)"
+ " -m Create the pipe using the specified mode (default a=rw)" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
"\n\nTYPEs include:\n" \
" b: Make a block (buffered) device\n" \
" c or u: Make a character (un-buffered) device\n" \
- " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
+ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \
+ USE_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
#define mknod_example_usage \
"$ mknod /dev/fd0 b 2 0\n" \
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
- "Prepare a disk partition to be used as a swap partition" \
+ "Prepare a disk partition to be used as swap partition" \
"\n\nOptions:\n" \
" -c Check for read-ability\n" \
" -v0 Make version 0 swap [max 128 Megs]\n" \
"Options:\n" \
" -k Make module autoclean-able\n" \
" -n Just show what would be done\n" \
- " -q Quiet output\n" \
+ " -q Quiet\n" \
" -r Remove module (stacks) or do autoclean\n" \
" -s Report via syslog instead of stderr\n" \
- " -v Verbose output"
+ " -v Verbose"
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
#define mountpoint_full_usage \
"mountpoint checks if the directory is a mountpoint" \
"\n\nOptions:\n" \
- " -q Be more quiet\n" \
+ " -q Quiet\n" \
" -d Print major/minor device number of the filesystem\n" \
" -x Print major/minor device number of the blockdevice"
#define mountpoint_example_usage \
" or\n" \
"$ nameif -c /etc/my_mactab_file\n" \
+#if !ENABLE_DESKTOP
+
#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
#define NC_OPTIONS_STR "\n\nOptions:"
#else
"\n -e Exec rest of command line after connect" \
"\n -i SECS Delay interval for lines sent" \
"\n -w SECS Timeout for connect" \
- "\n -f file Use file (ala /dev/ttyS0) instead of network" \
+ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
) \
USE_NC_SERVER( \
"\n -l Listen mode, for inbound connects" \
"quit\n" \
"221 foobar closing connection\n"
+#else /* DESKTOP nc - much more compatible with nc 1.10 */
+
+#define nc_trivial_usage \
+ "[-options] hostname port - connect" \
+ USE_NC_SERVER("\nnc [-options] -l -p port [hostname] [port] - listen")
+#define nc_full_usage \
+ USE_NC_SERVER( \
+ "-l Listen mode, for inbound connects\n" \
+ ) \
+ "-n Do not do DNS resolution" \
+ "\n-s addr Local address" \
+ "\n-p port Local port" \
+ "\n-u UDP mode" \
+ "\n-v Verbose (cumulative: -vv)" \
+ "\n-w secs Timeout for connects and final net reads" \
+ USE_NC_EXTRA( \
+ "\n-i sec Delay interval for lines sent" /* ", ports scanned" */ \
+ "\n-o file Hex dump of traffic" \
+ "\n-z Zero-I/O mode (scanning)" \
+ ) \
+ "\n-e prog [args] Program to exec after connect (must be last)" \
+/* "\n-r Randomize local and remote ports" */
+/* "\n-g gateway Source-routing hop point[s], up to 8" */
+/* "\n-G num Source-routing pointer: 4, 8, 12, ..." */
+/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
+
+#endif
+
+
#define netstat_trivial_usage \
"[-laenrtuwx]"
#define netstat_full_usage \
"host"
#define ping_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts"
+#define ping6_trivial_usage \
+ "host"
+#define ping6_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
"[OPTION]... host"
#define ping_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts" \
"\n\nOptions:\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -I IP Use IP as source address\n" \
- " -q Quiet mode, only displays output at start\n" \
- " and when finished"
+ " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -I iface/IP Use interface or IP address as source\n" \
+ " -q Quiet, only displays output at start\n" \
+ " and when finished"
+#define ping6_trivial_usage \
+ "[OPTION]... host"
+#define ping6_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -I iface/IP Use interface or IP address as source\n" \
+ " -q Quiet, only displays output at start\n" \
+ " and when finished"
#endif
#define ping_example_usage \
"$ ping localhost\n" \
"--- debian ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
-
-#ifndef CONFIG_FEATURE_FANCY_PING6
-#define ping6_trivial_usage \
- "host"
-#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts"
-#else
-#define ping6_trivial_usage \
- "[OPTION]... host"
-#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts" \
- "\n\nOptions:\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -q Quiet mode, only displays output at start\n" \
- " and when finished"
-#endif
#define ping6_example_usage \
"$ ping6 ip6-localhost\n" \
"PING ip6-localhost (::1): 56 data bytes\n" \
"Report process status\n" \
USAGE_PS \
USE_SELINUX( \
- "\n -c Show SE Linux context") \
+ "\n -Z Show SE Linux context") \
USE_FEATURE_PS_WIDE( \
"\n w Wide output")
#define readlink_trivial_usage \
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
- "Display the value of a symbolic link" \
+ "Display the value of a symlink" \
USE_FEATURE_READLINK_FOLLOW( \
"\n\nOptions:\n" \
" -f Canonicalize by following all symlinks")
" -p <profile> (Default: /proc/profile)\n" \
" -M <mult> Set the profiling multiplier to <mult>\n" \
" -i Print only info about the sampling step\n" \
- " -v Print verbose data\n" \
+ " -v Verbose\n" \
" -a Print all symbols, even if count is 0\n" \
" -b Print individual histogram-bin counts\n" \
" -s Print individual counters within functions\n" \
#define rpm2cpio_full_usage \
"Output a cpio archive of the rpm file"
+#define runcon_trivial_usage \
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
+ " runcon CONTEXT COMMAND [args]"
+#define runcon_full_usage \
+ "runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
+ "runcon CONTEXT COMMAND [args]\n" \
+ "Run a program in a different security context\n\n" \
+ " CONTEXT Complete security context\n" \
+ " -c, --compute Compute process transition context before modifying\n" \
+ " -t, --type=TYPE Type (for same role as parent)\n" \
+ " -u, --user=USER User identity\n" \
+ " -r, --role=ROLE Role\n" \
+ " -l, --range=RNG Levelrange" \
+
#define run_parts_trivial_usage \
- "[-t] [-a ARG] [-u MASK] DIRECTORY"
+ "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
"Run a bunch of scripts in a directory" \
"\n\nOptions:\n" \
" -t Prints what would be run, but does not actually run anything\n" \
" -a ARG Pass ARG as an argument for every program invoked\n" \
- " -u MASK Set the umask to MASK before executing every program"
+ " -u MASK Set the umask to MASK before executing every program" \
+USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when they are not executable")
+
+#define run_parts_example_usage \
+ "$ run-parts -a start /etc/init.d\n" \
+ "$ run-parts -a stop=now /etc/init.d\n\n" \
+ "Let's assume you have a script foo/dosomething:\n" \
+ "#!/bin/sh\n" \
+ "for i in $*; do eval $i; done ; unset i\n" \
+ "case \"$1\" in\n" \
+ "start*) echo starting something ;;\n" \
+ "stop*) set -x ; shutdown -h $stop ;;\n" \
+ "esac\n\n" \
+ "Running this yields:\n" \
+ "$run-parts -a stop=+4m foo/\n" \
+ "+ shutdown -h +4m"
#define runlevel_trivial_usage \
"[utmp]"
"$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
+#define selinuxenabled_trivial_usage
+#define selinuxenabled_full_usage
+
#define seq_trivial_usage \
"[first [increment]] last"
#define seq_full_usage \
"\n\nOptions:\n" \
" -r Reset output to /dev/console"
+#define setenforce_trivial_usage \
+ "[ Enforcing | Permissive | 1 | 0 ]"
+#define setenforce_full_usage
+
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
) \
""
+#define split_trivial_usage \
+ "[OPTION] [INPUT [PREFIX]]"
+#define split_full_usage \
+ "Options:" \
+ "\n -b n[k|m] Split by bytes" \
+ "\n -l n Split by lines" \
+ "\n -a n Use n letters as suffix"
+#define split_example_usage \
+ "$ split TODO foo\n" \
+ "$ cat TODO | split -a 2 -l 2 TODO_\n"
+
#define start_stop_daemon_trivial_usage \
"[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
"\n -m|--make-pidfile Create the -p file and enter pid in it" \
"\n -n|--name <process-name> Stop processes with this name" \
"\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
- "\n -q|--quiet Be quiet" \
+ "\n -q|--quiet Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -o|--oknodo Exit status 0 if nothing done" \
- "\n -v|--verbose Be verbose" \
+ "\n -v|--verbose Verbose" \
"\n -N|--nicelevel <N> Add N to process's nice level" \
) \
"\n -s|--signal <signal> Signal to send (default TERM)" \
- "\n -U|--chuid <username>|<uid> Start process with this name"
+ "\n -c|--chuid <user>[:[<group>]] Change to specified user/group"
#define stat_trivial_usage \
"[OPTION] FILE..."
" -f Display filesystem status\n" \
" -L,-l Dereference links\n" \
" -t Display info in terse form" \
+ USE_SELINUX( \
+ "\n -Z Print security context" \
+ ) \
USE_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
" %h Number of hard links\n" \
" %i Inode number\n" \
" %n File name\n" \
- " %N Quoted file name with dereference if symbolic link\n" \
+ " %N Quoted file name with dereference if symlink\n" \
" %o I/O block size\n" \
" %s Total size, in bytes\n" \
" %t Major device type in hex\n" \
" %c Total file nodes in file system\n" \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
+ USE_SELINUX( \
+ " %C Security context in SELinux\n" \
+ ) \
" %i File System ID in hex\n" \
" %l Maximum length of filenames\n" \
" %n File name\n" \
- " %s Block size (for faster transfers)\n" \
+ " %s Block size (for faster transfer)\n" \
" %S Fundamental block size (for block counts)\n" \
" %t Type in hex\n" \
" %T Type in human readable form" \
"System logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf." \
"\n\nOptions:" \
- "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
- "\n -n Run as a foreground process" \
- "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
- "\n -l n Sets the local log level of messages to n" \
- "\n -S Make logging output smaller" \
+ "\n -n Run as foreground process" \
+ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
+ "\n -l n Sets the local log level of messages to n" \
+ "\n -S Make logging output smaller" \
USE_FEATURE_ROTATE_LOGFILE( \
- "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
- "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
+ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
+ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
USE_FEATURE_REMOTE_LOG( \
"\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
- "\n -L Log locally and via network logging (default is network only)") \
+ "\n -L Log locally and via network logging (default is network only)") \
USE_FEATURE_IPC_SYSLOG( \
- "\n -C [size(KiB)] Log to a circular buffer (read the buffer using logread)")
+ "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
+ /* NB: -Csize shouldn't have space (because size is optional) */
+/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
" exclude File to exclude\n" \
" X File with names to exclude\n") \
" C Change to directory DIR before operation\n" \
- " v Verbosely list files processed"
+ " v Verbose"
#define tar_example_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
"$ echo $?\n" \
"1\n"
+#define tcpsvd_trivial_usage \
+ "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..."
+/* with not-implemented options: */
+/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [ -t sec] ip port prog..." */
+#define tcpsvd_full_usage \
+ "Creates TCP socket, binds it to ip:port and listens on it\n" \
+ "for incoming connections. For each connection it runs prog." \
+ "\n" \
+ "\nip IP to listen on. '0' = all" \
+ "\nport Port to listen on" \
+ "\nprog [arg] Program to run" \
+ "\n-l name Local hostname (else looks up local hostname in DNS)" \
+ "\n-u user[:group] Change to user/group after bind" \
+ "\n-c n Handle up to n connections simultaneously" \
+ "\n-b n Allow a backlog of approximately n TCP SYNs" \
+ "\n-C n[:msg] Allow only up to n connections from the same IP" \
+ "\n New connections from this IP address are closed" \
+ "\n immediately. 'msg' is written to the peer before close" \
+ "\n-h Look up peer's hostname" \
+ "\n-E Do not set up environment variables" \
+ "\n-v Verbose"
+
+#define udpsvd_trivial_usage \
+ "[-hEv] [-c n] [-u user] [-l name] ip port prog"
+#define udpsvd_full_usage \
+ "Creates UDP socket, binds it to ip:port and listens on it\n" \
+ "for incoming packets. For each packet it runs prog\n" \
+ "(redirecting all further packets with same peer ip:port to it)." \
+ "\n" \
+ "\nip IP to listen on. '0' = all" \
+ "\nport Port to listen on" \
+ "\nprog [arg] Program to run" \
+ "\n-l name Local hostname (else looks up local hostname in DNS)" \
+ "\n-u user[:group] Change to user/group after bind" \
+ "\n-c n Handle up to n connections simultaneously" \
+ "\n-h Look up peer's hostname" \
+ "\n-E Do not set up environment variables" \
+ "\n-v Verbose"
+
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
"Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
"COMMAND's resource usage information is displayed." \
"\n\nOptions:\n" \
- " -v Display verbose resource usage information"
+ " -v Verbose"
#define top_trivial_usage \
"[-b] [-n count] [-d seconds]"
" -d Set SO_DEBUG options to socket\n" \
" -n Print hop addresses numerically rather than symbolically\n" \
" -r Bypass the normal routing tables and send directly to a host\n" \
- " -v Verbose output\n" \
- " -m max_ttl Set the max time-to-live (max number of hops)\n" \
- " -p port# Set the base UDP port number used in probes\n" \
+ " -v Verbose\n" \
+ " -m max_ttl Max time-to-live (max number of hops)\n" \
+ " -p port# Base UDP port number used in probes\n" \
" (default is 33434)\n" \
- " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \
- " (default is 3)\n" \
- " -s src_addr Use the following IP address as the source address\n" \
- " -t tos Set the type-of-service in probe packets to the following value\n" \
- " (default 0)\n" \
- " -w wait Set the time (in seconds) to wait for a response to a probe\n" \
+ " -q nqueries Number of probes per 'ttl' (default 3)\n" \
+ " -s src_addr IP address to use as the source address\n" \
+ " -t tos Type-of-service in probe packets (default 0)\n" \
+ " -w wait Time in seconds to wait for a response to a probe\n" \
" (default 3 sec)\n" \
- " -g Specify a loose source route gateway (8 maximum)"
+ " -g Specify a loose source route gateway (8 max)"
#define true_trivial_usage \
""
#define tty_full_usage \
"Print the file name of the terminal connected to standard input" \
+ USE_INCLUDE_SUSv2( \
"\n\nOptions:\n" \
- " -s Print nothing, only return an exit status"
+ " -s Print nothing, only return an exit status")
#define tty_example_usage \
"$ tty\n" \
"/dev/tty2\n"
#define umount_full_usage \
"Unmount file systems" \
"\n\nOptions:\n" \
- "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ USE_FEATURE_UMOUNT_ALL( \
+ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \
USE_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries") \
"\n -r Try to remount devices as read-only if mount is busy" \
#define unix2dos_full_usage \
"Convert FILE from unix format to dos format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
- "When no file is given, use stdin for input and stdout for output." \
+ "When no file is given, use stdin/stdout." \
"\n\nOptions:\n" \
" -u Output will be in UNIX format\n" \
" -d Output will be in DOS format"
" -n Never overwrite existing files (default)\n" \
" -o Overwrite files without prompting\n" \
" -p Send output to stdout\n" \
- " -q Be quiet\n" \
+ " -q Quiet\n" \
" -x Exclude these files\n" \
" -d Extract files into this directory"
#define vconfig_full_usage \
"Create and remove virtual ethernet devices" \
"\n\nOptions:\n" \
- " add [interface-name] [vlan_id]\n" \
- " rem [vlan-name]\n" \
- " set_flag [interface-name] [flag-num] [0 | 1]\n" \
- " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_name_type [name-type]"
+ " add [interface-name] [vlan_id]\n" \
+ " rem [vlan-name]\n" \
+ " set_flag [interface-name] [flag-num] [0 | 1]\n" \
+ " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_name_type [name-type]"
#define vi_trivial_usage \
"[OPTION] [FILE]..."
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url"
#define wget_full_usage \
"Retrieve files via HTTP or FTP" \
"\n\nOptions:\n" \
- " -c Continue retrieval of aborted transfers\n" \
- " -q Quiet mode - do not print\n" \
+ " -s Spider mode - only check file existence\n" \
+ " -c Continue retrieval of aborted transfer\n" \
+ " -q Quiet\n" \
" -P Set directory prefix to DIR\n" \
" -O Save to filename ('-' for stdout)\n" \
" -U Adjust 'User-Agent' field\n" \
#define zcip_full_usage \
"Manage a ZeroConf IPv4 link-local address" \
"\n\nOptions:\n" \
- " -f foreground mode\n" \
- " -q quit after address (no daemon)\n" \
- " -r 169.254.x.x request this address first\n" \
- " -v verbose"
+ " -f Foreground mode\n" \
+ " -q Quit after address (no daemon)\n" \
+ " -r 169.254.x.x Request this address first\n" \
+ " -v Verbose"
#endif /* __BB_USAGE_H__ */