* or
* |<5 spaces>"\ntext with tabs"....
*/
+#ifndef BB_USAGE_H
+#define BB_USAGE_H 1
-#ifndef __BB_USAGE_H__
-#define __BB_USAGE_H__
+
+#define NOUSAGE_STR "\b"
+
+#define acpid_trivial_usage \
+ "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE...]"
+#define acpid_full_usage "\n\n" \
+ "Listen to ACPI events and spawn specific helpers on event arrival\n" \
+ "\nOptions:" \
+ "\n -d Do not daemonize and log to stderr" \
+ "\n -c DIR Config directory [/etc/acpi]" \
+ "\n -e FILE /proc event file [/proc/acpi/event]" \
+ "\n -l FILE Log file [/var/log/acpid]" \
+ IF_FEATURE_ACPID_COMPAT( \
+ "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
+ )
+
+#define acpid_example_usage \
+ "# acpid -l /var/log/my-acpi-log\n" \
+ "# acpid -d /dev/input/event*\n"
#define addgroup_trivial_usage \
- "[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name"
-#define addgroup_full_usage \
- "Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \
+ "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name"
+#define addgroup_full_usage "\n\n" \
+ "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
"\nOptions:" \
- "\n -g GID Group id"
+ "\n -g GID Group id" \
+ "\n -S Create a system group" \
#define adduser_trivial_usage \
"[OPTIONS] user_name"
-#define adduser_full_usage \
- "Add an user\n" \
+#define adduser_full_usage "\n\n" \
+ "Add a user\n" \
"\nOptions:" \
"\n -h DIR Home directory" \
"\n -g GECOS GECOS field" \
"\n -S Create a system user" \
"\n -D Do not assign a password" \
"\n -H Do not create home directory" \
+ "\n -u UID User id" \
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
-#define adjtimex_full_usage \
+#define adjtimex_full_usage "\n\n" \
"Read and optionally set system timebase parameters. See adjtimex(2).\n" \
"\nOptions:" \
"\n -q Quiet" \
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
-#define ar_full_usage \
+#define ar_full_usage "\n\n" \
"Extract or list FILES from an ar archive\n" \
"\nOptions:" \
"\n -o Preserve original dates" \
"\n -v Verbose" \
#define arp_trivial_usage \
- "\n" \
- "[-vn] [-H type] [-i if] -a [hostname]\n" \
- "[-v] [-i if] -d hostname [pub]\n" \
- "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
- "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
- "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
-#define arp_full_usage \
+ "\n[-vn] [-H type] [-i if] -a [hostname]" \
+ "\n[-v] [-i if] -d hostname [pub]" \
+ "\n[-v] [-H type] [-i if] -s hostname hw_addr [temp]" \
+ "\n[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub" \
+ "\n[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub"
+#define arp_full_usage "\n\n" \
"Manipulate ARP cache\n" \
"\nOptions:" \
"\n -a Display (all) hosts" \
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
-#define arping_full_usage \
+#define arping_full_usage "\n\n" \
"Send ARP requests/replies\n" \
"\nOptions:" \
"\n -f Quit on first ARP reply" \
"\n -s sender Sender IP address" \
"\n target Target IP address" \
-#define ash_trivial_usage \
- "[FILE]...\n" \
- "or: ash -c command [args]..."
-#define ash_full_usage \
- "The ash shell"
+#define sh_trivial_usage NOUSAGE_STR
+#define sh_full_usage ""
+#define ash_trivial_usage NOUSAGE_STR
+#define ash_full_usage ""
+#define hush_trivial_usage NOUSAGE_STR
+#define hush_full_usage ""
+#define lash_trivial_usage NOUSAGE_STR
+#define lash_full_usage ""
+#define msh_trivial_usage NOUSAGE_STR
+#define msh_full_usage ""
#define awk_trivial_usage \
- "[OPTION]... [program-text] [FILE...]"
-#define awk_full_usage \
+ "[OPTIONS] [AWK_PROGRAM] [FILE]..."
+#define awk_full_usage "\n\n" \
"Options:" \
- "\n -v var=val Set variable" \
- "\n -F sep Use sep as field separator" \
- "\n -f file Read program from file" \
+ "\n -v VAR=VAL Set variable" \
+ "\n -F SEP Use SEP as field separator" \
+ "\n -f FILE Read program from file" \
#define basename_trivial_usage \
"FILE [SUFFIX]"
-#define basename_full_usage \
+#define basename_full_usage "\n\n" \
"Strip directory path and suffixes from FILE.\n" \
"If specified, also remove any trailing SUFFIX."
#define basename_example_usage \
"$ basename /foo/bar.txt .txt\n" \
"bar"
+#define beep_trivial_usage \
+ "-f freq -l length -d delay -r repetitions -n"
+#define beep_full_usage "\n\n" \
+ "Options:" \
+ "\n -f Frequency in Hz" \
+ "\n -l Length in ms" \
+ "\n -d Delay in ms" \
+ "\n -r Repetitions" \
+ "\n -n Start new tone" \
+
+#define fbsplash_trivial_usage \
+ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
+#define fbsplash_full_usage "\n\n" \
+ "Options:" \
+ "\n -s Image" \
+ "\n -c Hide cursor" \
+ "\n -d Framebuffer device (default /dev/fb0)" \
+ "\n -i Config file (var=value):" \
+ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
+ "\n BAR_R,BAR_G,BAR_B" \
+ "\n -f Control pipe (else exit after drawing image)" \
+ "\n commands: 'NN' (% for progress bar) or 'exit'" \
+
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
-#define brctl_full_usage \
+#define brctl_full_usage "\n\n" \
"Manage ethernet bridges.\n" \
"\nCommands:" \
+ IF_FEATURE_BRCTL_SHOW( \
+ "\n show Show a list of bridges" \
+ ) \
"\n addbr BRIDGE Create BRIDGE" \
"\n delbr BRIDGE Delete BRIDGE" \
"\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
"\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
- USE_FEATURE_BRCTL_FANCY( \
+ IF_FEATURE_BRCTL_FANCY( \
"\n setageing BRIDGE TIME Set ageing time" \
"\n setfd BRIDGE TIME Set bridge forward delay" \
"\n sethello BRIDGE TIME Set hello time" \
"\n setportprio BRIDGE PRIO Set port priority" \
"\n setbridgeprio BRIDGE PRIO Set bridge priority" \
"\n stp BRIDGE [1|0] STP on/off" \
- )
+ ) \
+
#define bunzip2_trivial_usage \
- "[OPTION]... [FILE]"
-#define bunzip2_full_usage \
+ "[OPTIONS] [FILE]"
+#define bunzip2_full_usage "\n\n" \
"Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -f Force" \
#define bzip2_trivial_usage \
- "[OPTION]... [FILE]..."
-#define bzip2_full_usage \
+ "[OPTIONS] [FILE]..."
+#define bzip2_full_usage "\n\n" \
"Compress FILE(s) with bzip2 algorithm.\n" \
"When FILE is '-' or unspecified, reads standard input. Implies -c.\n" \
"\nOptions:" \
#define busybox_notes_usage \
"Hello world!\n"
+#define lzop_trivial_usage \
+ "[-cfvd123456789CF] [FILE]..."
+#define lzop_full_usage "\n\n" \
+ " -c Write to standard output" \
+ "\n -f Force" \
+ "\n -v Verbose" \
+ "\n -d Decompress" \
+ "\n -F Don't store or verify checksum" \
+ "\n -C Also write checksum of compressed block" \
+ "\n -1..9 Compression level" \
+
+#define lzopcat_trivial_usage \
+ "[-vCF] [FILE]..."
+#define lzopcat_full_usage "\n\n" \
+ " -v Verbose" \
+ "\n -F Don't store or verify checksum" \
+
+#define unlzop_trivial_usage \
+ "[-cfvCF] [FILE]..."
+#define unlzop_full_usage "\n\n" \
+ " -c Write to standard output" \
+ "\n -f Force" \
+ "\n -v Verbose" \
+ "\n -F Don't store or verify checksum" \
+
#define bzcat_trivial_usage \
"FILE"
-#define bzcat_full_usage \
+#define bzcat_full_usage "\n\n" \
"Uncompress to stdout"
#define unlzma_trivial_usage \
- "[OPTION]... [FILE]"
-#define unlzma_full_usage \
+ "[OPTIONS] [FILE]"
+#define unlzma_full_usage "\n\n" \
"Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
#define lzmacat_trivial_usage \
"FILE"
-#define lzmacat_full_usage \
+#define lzmacat_full_usage "\n\n" \
"Uncompress to stdout"
#define cal_trivial_usage \
"[-jy] [[month] year]"
-#define cal_full_usage \
+#define cal_full_usage "\n\n" \
"Display a calendar\n" \
"\nOptions:" \
"\n -j Use julian dates" \
#define cat_trivial_usage \
"[-u] [FILE]..."
-#define cat_full_usage \
+#define cat_full_usage "\n\n" \
"Concatenate FILE(s) and print them to stdout\n" \
"\nOptions:" \
"\n -u Use unbuffered i/o (ignored)" \
#define catv_trivial_usage \
"[-etv] [FILE]..."
-#define catv_full_usage \
+#define catv_full_usage "\n\n" \
"Display nonprinting characters as ^x or M-x\n" \
"\nOptions:" \
"\n -e End each line with $" \
#define chat_trivial_usage \
"EXPECT [SEND [EXPECT [SEND...]]]"
-#define chat_full_usage \
+#define chat_full_usage "\n\n" \
"Useful for interacting with a modem connected to stdin/stdout.\n" \
"A script consists of one or more \"expect-send\" pairs of strings,\n" \
"each pair is a pair of arguments. Example:\n" \
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
-#define chattr_full_usage \
+#define chattr_full_usage "\n\n" \
"Change file attributes on an ext2 fs\n" \
"\nModifiers:" \
"\n - Remove attributes" \
#define chcon_trivial_usage \
"[OPTIONS] CONTEXT FILE..." \
"\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
- USE_FEATURE_CHCON_LONG_OPTIONS( \
+ IF_FEATURE_CHCON_LONG_OPTIONS( \
"\n chcon [OPTIONS] --reference=RFILE FILE..." \
)
-#define chcon_full_usage \
+#define chcon_full_usage "\n\n" \
"Change the security context of each FILE to CONTEXT\n" \
- USE_FEATURE_CHCON_LONG_OPTIONS( \
+ IF_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -c,--changes Report changes made" \
"\n -h,--no-dereference Affect symlinks instead of their targets" \
"\n -l,--range=RANGE" \
"\n -R,--recursive Recurse subdirectories" \
) \
- SKIP_FEATURE_CHCON_LONG_OPTIONS( \
+ IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -c Report changes made" \
"\n -h Affect symlinks instead of their targets" \
)
#define chmod_trivial_usage \
- "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
-#define chmod_full_usage \
+ "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
+#define chmod_full_usage "\n\n" \
"Each MODE is one or more of the letters ugoa, one of the\n" \
"symbols +-= and one or more of the letters rwxst\n" \
"\nOptions:" \
"\n -R Recurse directories" \
- USE_DESKTOP( \
+ IF_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chgrp_trivial_usage \
- "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
-#define chgrp_full_usage \
+ "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
+#define chgrp_full_usage "\n\n" \
"Change the group membership of each FILE to GROUP\n" \
"\nOptions:" \
"\n -R Recurse directories" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Do not traverse symlinks (default)" \
- USE_DESKTOP( \
+ IF_DESKTOP( \
"\n -c List changed files" \
"\n -v Verbose" \
"\n -f Hide errors" \
"-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
#define chown_trivial_usage \
- "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
-#define chown_full_usage \
+ "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+#define chown_full_usage "\n\n" \
"Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
"\nOptions:" \
"\n -R Recurse directories" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Do not traverse symlinks (default)" \
- USE_DESKTOP( \
+ IF_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chpst_trivial_usage \
- "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \
- "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
- "[-p processes] [-f bytes] [-c bytes] prog args"
-#define chpst_full_usage \
- "Change the process state and run specified program\n" \
+ "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
+ " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
+ " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
+#define chpst_full_usage "\n\n" \
+ "Change the process state and run PROG\n" \
"\nOptions:" \
"\n -u USER[:GRP] Set uid and gid" \
"\n -U USER[:GRP] Set $UID and $GID in environment" \
"\n -e DIR Set environment variables as specified by files" \
"\n in DIR: file=1st_line_of_file" \
"\n -/ DIR Chroot to DIR" \
- "\n -n INC Add INC to nice value" \
- "\n -m BYTES Limit data segment, stack segment, locked physical pages," \
- "\n and total of all segment per process to BYTES each" \
+ "\n -n NICE Add NICE to nice value" \
+ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
"\n -d BYTES Limit data segment" \
- "\n -o N Limit the number of open file descriptors per process to N" \
- "\n -p N Limit number of processes per uid to N" \
- "\n -f BYTES Limit output file size to BYTES" \
- "\n -c BYTES Limit core file size to BYTES" \
+ "\n -o N Limit number of open files per process" \
+ "\n -p N Limit number of processes per uid" \
+ "\n -f BYTES Limit output file sizes" \
+ "\n -c BYTES Limit core file size" \
"\n -v Verbose" \
- "\n -P Run prog in a new process group" \
+ "\n -P Create new process group" \
"\n -0 Close standard input" \
"\n -1 Close standard output" \
"\n -2 Close standard error" \
#define setuidgid_trivial_usage \
"account prog args"
-#define setuidgid_full_usage \
+#define setuidgid_full_usage "\n\n" \
"Set uid and gid to account's uid and gid, removing all supplementary\n" \
- "groups, then run prog"
+ "groups and run PROG"
#define envuidgid_trivial_usage \
"account prog args"
-#define envuidgid_full_usage \
- "Set $UID to account's uid and $GID to account's gid, then run prog"
+#define envuidgid_full_usage "\n\n" \
+ "Set $UID to account's uid and $GID to account's gid and run PROG"
#define envdir_trivial_usage \
"dir prog args"
-#define envdir_full_usage \
+#define envdir_full_usage "\n\n" \
"Set various environment variables as specified by files\n" \
- "in the directory dir, then run prog"
+ "in the directory dir and run PROG"
#define softlimit_trivial_usage \
- "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
- "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
- "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
-#define softlimit_full_usage \
- "Set soft resource limits, then run prog\n" \
- "\nOptions:" \
- "\n -m n Same as -d n -s n -l n -a n" \
- "\n -d n Limit the data segment per process to n bytes" \
- "\n -s n Limit the stack segment per process to n bytes" \
- "\n -l n Limit the locked physical pages per process to n bytes" \
- "\n -a n Limit the total of all segments per process to n bytes" \
- "\n -o n Limit the number of open file descriptors per process to n" \
- "\n -p n Limit the number of processes per uid to n" \
+ "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
+ " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
+ " PROG ARGS"
+#define softlimit_full_usage "\n\n" \
+ "Set soft resource limits, then run PROG\n" \
+ "\nOptions:" \
+ "\n -a BYTES Limit total size of all segments" \
+ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
+ "\n -d BYTES Limit data segment" \
+ "\n -s BYTES Limit stack segment" \
+ "\n -l BYTES Limit locked memory size" \
+ "\n -o N Limit number of open files per process" \
+ "\n -p N Limit number of processes per uid" \
"\nOptions controlling file sizes:" \
- "\n -f n Limit output file sizes to n bytes" \
- "\n -c n Limit core file sizes to n bytes" \
+ "\n -f BYTES Limit output file sizes" \
+ "\n -c BYTES Limit core file size" \
"\nEfficiency opts:" \
- "\n -r n Limit the resident set size to n bytes. This limit is not" \
- "\n enforced unless physical memory is full" \
- "\n -t n Limit the CPU time to n seconds. This limit is not enforced" \
- "\n except that the process receives a SIGXCPU signal after n seconds" \
- "\n" \
- "\nSome options may have no effect on some operating systems" \
- "\nn may be =, indicating that soft limit should be set equal to hard limit" \
+ "\n -r BYTES Limit resident set size" \
+ "\n -t N Limit CPU time, process receives" \
+ "\n a SIGXCPU after N seconds" \
#define chroot_trivial_usage \
- "NEWROOT [COMMAND...]"
-#define chroot_full_usage \
- "Run COMMAND with root directory set to NEWROOT"
+ "NEWROOT [PROG [ARGS]]"
+#define chroot_full_usage "\n\n" \
+ "Run PROG with root directory set to NEWROOT"
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
#define chvt_trivial_usage \
"N"
-#define chvt_full_usage \
+#define chvt_full_usage "\n\n" \
"Change the foreground virtual terminal to /dev/ttyN"
#define cksum_trivial_usage \
"FILES..."
-#define cksum_full_usage \
+#define cksum_full_usage "\n\n" \
"Calculate the CRC32 checksums of FILES"
#define clear_trivial_usage \
""
-#define clear_full_usage \
+#define clear_full_usage "\n\n" \
"Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
-#define cmp_full_usage \
+ "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]") "]]"
+#define cmp_full_usage "\n\n" \
"Compares FILE1 vs stdin if FILE2 is not specified\n" \
"\nOptions:" \
"\n -l Write the byte numbers (decimal) and values (octal)" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
-#define comm_full_usage \
+#define comm_full_usage "\n\n" \
"Compare FILE1 to FILE2, or to stdin if - is specified\n" \
"\nOptions:" \
"\n -1 Suppress lines unique to FILE1" \
#define bbconfig_trivial_usage \
""
-#define bbconfig_full_usage \
+#define bbconfig_full_usage "\n\n" \
"Print the config file which built busybox"
-#define bbsh_trivial_usage \
- "[FILE]...\n" \
- "or: bbsh -c command [args]..."
-#define bbsh_full_usage \
- "The bbsh shell (command interpreter)"
-
#define chrt_trivial_usage \
- "[OPTION]... [prio] [pid | command [arg]...]"
-#define chrt_full_usage \
+ "[OPTIONS] [PRIO] [PID | PROG [ARGS]]"
+#define chrt_full_usage "\n\n" \
"Manipulate real-time attributes of a process\n" \
"\nOptions:" \
"\n -p Operate on pid" \
"You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
#define cp_trivial_usage \
- "[OPTION]... SOURCE DEST"
-#define cp_full_usage \
+ "[OPTIONS] SOURCE DEST"
+#define cp_full_usage "\n\n" \
"Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -a Same as -dpR" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -c Preserve security context" \
) \
"\n -d,-P Preserve links" \
"\n -l,-s Create (sym)links" \
#define cpio_trivial_usage \
- "-[dimtuv][F cpiofile]"
-#define cpio_full_usage \
- "Extract or list files from a cpio archive\n" \
- "Main operation mode:" \
- "\n d Make leading directories" \
- "\n i Extract" \
- "\n m Preserve mtime" \
- "\n t List" \
- "\n v Verbose" \
- "\n u Unconditional overwrite" \
- "\n F Input from file" \
+ "-[ti" IF_FEATURE_CPIO_O("o") IF_FEATURE_CPIO_P("p") "dmvu] [-F FILE]" \
+ IF_FEATURE_CPIO_O( " [-H newc]" )
+#define cpio_full_usage "\n\n" \
+ "Extract or list files from a cpio archive" \
+ IF_FEATURE_CPIO_O( ", or create a cpio archive" ) \
+ "\nMain operation mode:" \
+ "\n -t List" \
+ "\n -i Extract" \
+ IF_FEATURE_CPIO_O( \
+ "\n -o Create" \
+ ) \
+ IF_FEATURE_CPIO_P( \
+ "\n -p Passthrough" \
+ ) \
+ "\nOptions:" \
+ "\n -d Make leading directories" \
+ "\n -m Preserve mtime" \
+ "\n -v Verbose" \
+ "\n -u Overwrite" \
+ "\n -F Input file" \
+ IF_FEATURE_CPIO_O( \
+ "\n -H Define format" \
+ ) \
#define crond_trivial_usage \
- "-fbS -l N " USE_DEBUG_CROND_OPTION("-d N ") "-L LOGFILE -c DIR"
-#define crond_full_usage \
+ "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
+#define crond_full_usage "\n\n" \
" -f Foreground" \
"\n -b Background (default)" \
"\n -S Log to syslog (default)" \
"\n -l Set log level. 0 is the most verbose, default 8" \
- USE_DEBUG_CROND_OPTION( \
+ IF_FEATURE_CROND_D( \
"\n -d Set log level, log to stderr" \
) \
"\n -L Log to file" \
#define crontab_trivial_usage \
"[-c DIR] [-u USER] [-ler]|[FILE]"
-#define crontab_full_usage \
+#define crontab_full_usage "\n\n" \
" -c Crontab directory" \
"\n -u User" \
"\n -l List crontab" \
"\n FILE Replace crontab by FILE ('-': stdin)" \
#define cryptpw_trivial_usage \
- "[-a des|md5] [string]"
-#define cryptpw_full_usage \
- "Output crypted string.\n" \
- "If string isn't supplied on cmdline, read it from stdin.\n" \
+ "[OPTIONS] [PASSWORD] [SALT]"
+/* We do support -s, we just don't mention it */
+#define cryptpw_full_usage "\n\n" \
+ "Crypt the PASSWORD using crypt(3)\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -P,--password-fd=NUM Read password from fd NUM" \
+/* "\n -s,--stdin Use stdin; like -P0" */ \
+ "\n -m,--method=TYPE Encryption method TYPE" \
+ "\n -S,--salt=SALT" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -P NUM Read password from fd NUM" \
+/* "\n -s Use stdin; like -P0" */ \
+ "\n -m TYPE Encryption method TYPE" \
+ "\n -S SALT" \
+ ) \
+
+/* mkpasswd is an alias to cryptpw */
+
+#define mkpasswd_trivial_usage \
+ "[OPTIONS] [PASSWORD] [SALT]"
+/* We do support -s, we just don't mention it */
+#define mkpasswd_full_usage "\n\n" \
+ "Crypt the PASSWORD using crypt(3)\n" \
"\nOptions:" \
- "\n -a Algorithm to use (default: md5)" \
+ IF_LONG_OPTS( \
+ "\n -P,--password-fd=NUM Read password from fd NUM" \
+/* "\n -s,--stdin Use stdin; like -P0" */ \
+ "\n -m,--method=TYPE Encryption method TYPE" \
+ "\n -S,--salt=SALT" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -P NUM Read password from fd NUM" \
+/* "\n -s Use stdin; like -P0" */ \
+ "\n -m TYPE Encryption method TYPE" \
+ "\n -S SALT" \
+ ) \
+
+#define cttyhack_trivial_usage NOUSAGE_STR
+#define cttyhack_full_usage ""
#define cut_trivial_usage \
- "[OPTION]... [FILE]..."
-#define cut_full_usage \
+ "[OPTIONS] [FILE]..."
+#define cut_full_usage "\n\n" \
"Print selected fields from each input FILE to standard output\n" \
"\nOptions:" \
"\n -b LIST Output only bytes from LIST" \
"world\n"
#define date_trivial_usage \
- "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
-#define date_full_usage \
- "Display current time in the given FORMAT, or set system date\n" \
+ "[OPTIONS] [+FMT] [TIME]"
+#define date_full_usage "\n\n" \
+ "Display time (using +FMT), or set time\n" \
"\nOptions:" \
+ "\n [-s] TIME Set time to TIME" \
+ "\n -u Work in UTC (don't convert to local time)" \
"\n -R Output RFC-822 compliant date string" \
- "\n -d STRING Display time described by STRING, not 'now'" \
- USE_FEATURE_DATE_ISOFMT( \
- "\n -I[TIMESPEC] Output an ISO-8601 compliant date/time string" \
- "\n TIMESPEC='date' (or missing) for date only," \
+ IF_FEATURE_DATE_ISOFMT( \
+ "\n -I[SPEC] Output ISO-8601 compliant date string" \
+ "\n SPEC='date' (default) for date only," \
"\n 'hours', 'minutes', or 'seconds' for date and" \
"\n time to the indicated precision" \
- "\n -D hint Use 'hint' as date format, via strptime()" \
) \
- "\n -s STRING Set time described by STRING" \
- "\n -r FILE Display the last modification time of FILE" \
- "\n -u Print or sets Coordinated Universal Time" \
+ "\n -r FILE Display last modification time of FILE" \
+ "\n -d TIME Display TIME, not 'now'" \
+ IF_FEATURE_DATE_ISOFMT( \
+ "\n -D FMT Use FMT for -d TIME conversion" \
+ ) \
+ "\n" \
+ "\nRecognized formats for TIME:" \
+ "\n hh:mm[:ss]" \
+ "\n [YYYY.]MM.DD-hh:mm[:ss]" \
+ "\n YYYY-MM-DD hh:mm[:ss]" \
+ "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
#define date_example_usage \
"$ date\n" \
#define dc_trivial_usage \
"expression..."
-#define dc_full_usage \
- "This is a Tiny RPN calculator that understands the following operations:\n" \
- "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor.\n" \
- "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
- "\nOptions:" \
- "\np - Print the value on the top of the stack, without altering the stack" \
- "\nf - Print the entire contents of the stack without altering anything" \
- "\no - Pop the value off the top of the stack and use it to set the output radix" \
- "\n Only 10 and 16 are supported" \
+#define dc_full_usage "\n\n" \
+ "Tiny RPN calculator. Operations:\n" \
+ "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
+ "p - print top of the stack (without altering the stack),\n" \
+ "f - print entire stack, o - pop the value and set output radix\n" \
+ "(value must be 10 or 16).\n" \
+ "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \
#define dc_example_usage \
"$ dc 2 2 + p\n" \
"64\n"
#define dd_trivial_usage \
- "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
- " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
-#define dd_full_usage \
+ "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
+ " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
+#define dd_full_usage "\n\n" \
"Copy a file with converting and formatting\n" \
"\nOptions:" \
"\n if=FILE Read from FILE instead of stdin" \
"\n of=FILE Write to FILE instead of stdout" \
"\n bs=N Read and write N bytes at a time" \
- USE_FEATURE_DD_IBS_OBS( \
- "\n ibs=N Read N bytes at a time") \
- USE_FEATURE_DD_IBS_OBS( \
- "\n obs=N Write N bytes at a time") \
+ IF_FEATURE_DD_IBS_OBS( \
+ "\n ibs=N Read N bytes at a time" \
+ ) \
+ IF_FEATURE_DD_IBS_OBS( \
+ "\n obs=N Write N bytes at a time" \
+ ) \
"\n count=N Copy only N input blocks" \
"\n skip=N Skip N input blocks" \
"\n seek=N Skip N output blocks" \
- USE_FEATURE_DD_IBS_OBS( \
+ IF_FEATURE_DD_IBS_OBS( \
"\n conv=notrunc Don't truncate output file" \
"\n conv=noerror Continue after read errors" \
- "\n conv=sync Pad blocks with zeros") \
+ "\n conv=sync Pad blocks with zeros" \
+ "\n conv=fsync Physically write data out before finishing" \
+ ) \
"\n" \
"\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
"\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
#define deallocvt_trivial_usage \
"[N]"
-#define deallocvt_full_usage \
+#define deallocvt_full_usage "\n\n" \
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
- USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
-#define delgroup_full_usage \
+ IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
+#define delgroup_full_usage "\n\n" \
"Delete group GROUP from the system" \
- USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
+ IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
-#define deluser_full_usage \
- "Delete user USER from the system"
+#define deluser_full_usage "\n\n" \
+ "Delete USER from the system"
+
+#define depmod_trivial_usage NOUSAGE_STR
+#define depmod_full_usage ""
+
+#define devmem_trivial_usage \
+ "ADDRESS [WIDTH [VALUE]]"
+
+#define devmem_full_usage "\n\n" \
+ "Read/write from physical address\n" \
+ "\n ADDRESS Address to act upon" \
+ "\n WIDTH Width (8/16/...)" \
+ "\n VALUE Data to be written" \
#define devfsd_trivial_usage \
- "mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]")
-#define devfsd_full_usage \
+ "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
+#define devfsd_full_usage "\n\n" \
"Manage devfs permissions and old device name symlinks\n" \
"\nOptions:" \
"\n mntpnt The mount point where devfs is mounted" \
"\n -v Print the protocol version numbers for devfsd" \
"\n and the kernel-side protocol version and exit" \
- USE_DEVFSD_FG_NP( \
+ IF_DEVFSD_FG_NP( \
"\n -fg Run in foreground" \
"\n -np Exit after parsing the configuration file" \
"\n and processing synthetic REGISTER events," \
"\n do not poll for events" \
)
-/* -k is accepted but ignored for !HUMAN_READABLE,
- * but we won't mention this (unimportant) */
-#if ENABLE_FEATURE_HUMAN_READABLE || ENABLE_FEATURE_DF_INODE
-#define DF_HAS_OPTIONS(x) x
-#else
-#define DF_HAS_OPTIONS(x)
-#endif
#define df_trivial_usage \
- DF_HAS_OPTIONS("[-") \
- USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \
- DF_HAS_OPTIONS("] ") "[FILESYSTEM...]"
-#define df_full_usage \
+ "[-Pk" \
+ IF_FEATURE_HUMAN_READABLE("mh") \
+ IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
+ "] [FILESYSTEM...]"
+#define df_full_usage "\n\n" \
"Print filesystem usage statistics\n" \
- DF_HAS_OPTIONS("\nOptions:") \
- USE_FEATURE_HUMAN_READABLE( \
+ "\nOptions:" \
+ "\n -P POSIX output format" \
+ "\n -k 1024-byte blocks (default)" \
+ IF_FEATURE_HUMAN_READABLE( \
+ "\n -m 1M-byte blocks" \
"\n -h Human readable (e.g. 1K 243M 2G)" \
- "\n -m 1024*1024 blocks" \
- "\n -k 1024 blocks" \
) \
- USE_FEATURE_DF_INODE( \
+ IF_FEATURE_DF_FANCY( \
+ "\n -a Show all filesystems" \
"\n -i Inodes" \
- )
+ "\n -B SIZE Blocksize" \
+ ) \
+
#define df_example_usage \
"$ df\n" \
- "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
+ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n" \
"/dev/sda1 64216 36364 27852 57% /boot\n" \
"$ df /dev/sda3\n" \
- "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 8690864 8553540 137324 98% /\n"
-
-#define dhcprelay_trivial_usage \
- "[client_device_list] [server_device]"
-#define dhcprelay_full_usage \
- "Relay dhcp requests from client devices to server device"
+ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 8690864 8553540 137324 98% /\n" \
+ "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
+ "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 17381728 17107080 274648 98% /\n" \
+ "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
+ "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
+ "/dev/sda3 17381728 17107080 274648 98% /\n"
#define dhcprelay_trivial_usage \
- "[client_device_list] [server_device]"
-#define dhcprelay_full_usage \
- "Relay dhcp requests from client devices to server device"
+ "CLIENT_IFACE[,CLIENT_IFACE2...] SERVER_IFACE [SERVER_IP]"
+#define dhcprelay_full_usage "\n\n" \
+ "Relay DHCP requests between clients and server" \
#define diff_trivial_usage \
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
-#define diff_full_usage \
+#define diff_full_usage "\n\n" \
"Compare files line by line and output the differences between them.\n" \
"This implementation supports unified diffs only.\n" \
"\nOptions:" \
#define dirname_trivial_usage \
"FILENAME"
-#define dirname_full_usage \
+#define dirname_full_usage "\n\n" \
"Strip non-directory suffix from FILENAME"
#define dirname_example_usage \
"$ dirname /tmp/foo\n" \
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
-#define dmesg_full_usage \
+#define dmesg_full_usage "\n\n" \
"Print or control the kernel ring buffer\n" \
"\nOptions:" \
"\n -c Clear ring buffer after printing" \
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
-#define dnsd_full_usage \
+#define dnsd_full_usage "\n\n" \
"Small static DNS server daemon\n" \
"\nOptions:" \
"\n -c Config filename" \
"\n -d Daemonize" \
#define dos2unix_trivial_usage \
- "[option] [FILE]"
-#define dos2unix_full_usage \
- "Convert FILE from dos to unix format.\n" \
+ "[OPTION] [FILE]"
+#define dos2unix_full_usage "\n\n" \
+ "Convert FILE in-place from DOS to Unix format.\n" \
+ "When no file is given, use stdin/stdout.\n" \
+ "\nOptions:" \
+ "\n -u dos2unix" \
+ "\n -d unix2dos" \
+
+#define unix2dos_trivial_usage \
+ "[OPTION] [FILE]"
+#define unix2dos_full_usage "\n\n" \
+ "Convert FILE in-place from Unix to DOS format.\n" \
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
-#define dpkg_full_usage \
+#define dpkg_full_usage "\n\n" \
"Install, remove and manage Debian packages\n" \
"\nOptions:" \
"\n -i Install the package" \
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
-#define dpkg_deb_full_usage \
+#define dpkg_deb_full_usage "\n\n" \
"Perform actions on Debian packages (.debs)\n" \
"\nOptions:" \
"\n -c List contents of filesystem tree" \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
#define du_trivial_usage \
- "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
-#define du_full_usage \
+ "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
+#define du_full_usage "\n\n" \
"Summarize disk space used for each FILE and/or directory.\n" \
"Disk space is printed in units of " \
- USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
- SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
+ IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
+ IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
" bytes.\n" \
"\nOptions:" \
"\n -a Show file sizes too" \
"\n -l Count sizes many times if hard linked" \
"\n -s Display only a total for each argument" \
"\n -x Skip directories on different filesystems" \
- USE_FEATURE_HUMAN_READABLE( \
+ IF_FEATURE_HUMAN_READABLE( \
"\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
"\n -m Sizes in megabytes" \
) \
"\n -k Sizes in kilobytes" \
- USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
+ IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
#define du_example_usage \
"$ du\n" \
#define dumpkmap_trivial_usage \
"> keymap"
-#define dumpkmap_full_usage \
- "Print out a binary keyboard translation table to standard output"
+#define dumpkmap_full_usage "\n\n" \
+ "Print a binary keyboard translation table to standard output"
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
-#define dumpleases_full_usage \
+#define dumpleases_full_usage "\n\n" \
"Display DHCP leases granted by udhcpd\n" \
"\nOptions:" \
- USE_GETOPT_LONG( \
+ IF_LONG_OPTS( \
"\n -f,--file=FILE Leases file to load" \
"\n -r,--remaining Interpret lease times as time remaining" \
"\n -a,--absolute Interpret lease times as expire time" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_LONG_OPTS( \
"\n -f FILE Leases file to load" \
"\n -r Interpret lease times as time remaining" \
"\n -a Interpret lease times as expire time" \
"[-I inode_buffer_blocks] [-P process_inode_size] " \
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
-#define e2fsck_full_usage \
+#define e2fsck_full_usage "\n\n" \
"Check ext2/ext3 file system\n" \
"\nOptions:" \
"\n -p Automatic repair (no questions)" \
"\n -L file Set badblocks list" \
#define echo_trivial_usage \
- USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
-#define echo_full_usage \
+ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
+#define echo_full_usage "\n\n" \
"Print the specified ARGs to stdout" \
- USE_FEATURE_FANCY_ECHO( "\n" \
+ IF_FEATURE_FANCY_ECHO( "\n" \
"\nOptions:" \
"\n -n Suppress trailing newline" \
"\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
"Erik is cool\n" \
- USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
+ IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
-#define eject_full_usage \
+#define eject_full_usage "\n\n" \
"Eject specified DEVICE (or default /dev/cdrom)\n" \
"\nOptions:" \
- USE_FEATURE_EJECT_SCSI( \
+ IF_FEATURE_EJECT_SCSI( \
"\n -s SCSI device" \
) \
"\n -t Close tray" \
#define ed_full_usage ""
#define env_trivial_usage \
- "[-iu] [-] [name=value]... [command]"
-#define env_full_usage \
- "Print the current environment or run a program after setting\n" \
- "up the specified environment\n" \
+ "[-iu] [-] [name=value]... [PROG [ARGS]]"
+#define env_full_usage "\n\n" \
+ "Print the current environment or run PROG after setting up\n" \
+ "the specified environment\n" \
"\nOptions:" \
"\n -, -i Start with an empty environment" \
"\n -u Remove variable from the environment" \
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
-#define ether_wake_full_usage \
+#define ether_wake_full_usage "\n\n" \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
"a hostname with a known 'ethers' entry.\n" \
#define expand_trivial_usage \
"[-i] [-t NUM] [FILE|-]"
-#define expand_full_usage \
+#define expand_full_usage "\n\n" \
"Convert tabs to spaces, writing to standard output.\n" \
"\nOptions:" \
- USE_FEATURE_EXPAND_LONG_OPTIONS( \
+ IF_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i,--initial Do not convert tabs after non blanks" \
"\n -t,--tabs=N Tabstops every N chars" \
) \
- SKIP_FEATURE_EXPAND_LONG_OPTIONS( \
+ IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i Do not convert tabs after non blanks" \
"\n -t Tabstops every N chars" \
)
#define expr_trivial_usage \
"EXPRESSION"
-#define expr_full_usage \
+#define expr_full_usage "\n\n" \
"Print the value of EXPRESSION to standard output.\n" \
"\n" \
"EXPRESSION may be:\n" \
#define fakeidentd_trivial_usage \
"[-fiw] [-b ADDR] [STRING]"
-#define fakeidentd_full_usage \
+#define fakeidentd_full_usage "\n\n" \
"Provide fake ident (auth) service\n" \
"\nOptions:" \
"\n -f Run in foreground" \
#define false_trivial_usage \
""
-#define false_full_usage \
+#define false_full_usage "\n\n" \
"Return an exit code of FALSE (1)"
#define false_example_usage \
"1\n"
#define fbset_trivial_usage \
- "[options] [mode]"
-#define fbset_full_usage \
+ "[OPTIONS] [MODE]"
+#define fbset_full_usage "\n\n" \
"Show and modify frame buffer settings"
#define fbset_example_usage \
#define fdflush_trivial_usage \
"DEVICE"
-#define fdflush_full_usage \
+#define fdflush_full_usage "\n\n" \
"Force floppy disk drive to detect disk change"
#define fdformat_trivial_usage \
"[-n] DEVICE"
-#define fdformat_full_usage \
+#define fdformat_full_usage "\n\n" \
"Format floppy disk\n" \
"\nOptions:" \
"\n -n Don't verify after format" \
/* Looks like someone forgot to add this to config system */
#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
# define ENABLE_FEATURE_FDISK_BLKSIZE 0
-# define USE_FEATURE_FDISK_BLKSIZE(a)
+# define IF_FEATURE_FDISK_BLKSIZE(a)
#endif
#define fdisk_trivial_usage \
- "[-ul" USE_FEATURE_FDISK_BLKSIZE("s") "] " \
+ "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
"[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
-#define fdisk_full_usage \
+#define fdisk_full_usage "\n\n" \
"Change partition table\n" \
"\nOptions:" \
"\n -u Start and End are in sectors (instead of cylinders)" \
"\n -l Show partition table for each DISK, then exit" \
- USE_FEATURE_FDISK_BLKSIZE( \
+ IF_FEATURE_FDISK_BLKSIZE( \
"\n -s Show partition sizes in kb for each DISK, then exit" \
) \
"\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
"\n -H HEADS\n" \
"\n -S SECTORS" \
-#define fetchmail_trivial_usage \
- "[-w timeout] [-U user] -P password [-X] [-t] [-z] server[:port] maildir [prog]"
-#define fetchmail_full_usage \
- "Fetch content of remote mailbox to local Maildir.\n" \
- "\nOptions:" \
- "\n -w timeout Set timeout on network operations" \
- "\n -U username Authenticate with specified username/password" \
- "\n -P password" \
- "\n -X Use openssl connection helper for secured servers" \
- "\n -t Get only headers" \
- "\n -z Delete messages on server" \
- "\n prog Run prog <message_file> on message delivery" \
+#define blkid_trivial_usage \
+ ""
+#define blkid_full_usage "\n\n" \
+ "Print UUIDs of all filesystems."
#define findfs_trivial_usage \
"LABEL=label or UUID=uuid"
-#define findfs_full_usage \
+#define findfs_full_usage "\n\n" \
"Find a filesystem device based on a label or UUID."
#define findfs_example_usage \
"$ findfs LABEL=MyDevice"
#define find_trivial_usage \
"[PATH...] [EXPRESSION]"
-#define find_full_usage \
+#define find_full_usage "\n\n" \
"Search for files. The default PATH is the current directory,\n" \
"default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:" \
"\n -follow Dereference symlinks" \
- USE_FEATURE_FIND_XDEV( \
+ IF_FEATURE_FIND_XDEV( \
"\n -xdev Don't descend directories on other filesystems") \
- USE_FEATURE_FIND_MAXDEPTH( \
+ IF_FEATURE_FIND_MAXDEPTH( \
"\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
"\n tests/actions to command line arguments only") \
+ "\n -mindepth N Do not act on first N levels" \
"\n -name PATTERN File name (w/o directory name) matches PATTERN" \
"\n -iname PATTERN Case insensitive -name" \
- USE_FEATURE_FIND_PATH( \
+ IF_FEATURE_FIND_PATH( \
"\n -path PATTERN Path matches PATTERN") \
- USE_FEATURE_FIND_REGEX( \
+ IF_FEATURE_FIND_REGEX( \
"\n -regex PATTERN Path matches regex PATTERN") \
- USE_FEATURE_FIND_TYPE( \
+ IF_FEATURE_FIND_TYPE( \
"\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
- USE_FEATURE_FIND_PERM( \
+ IF_FEATURE_FIND_PERM( \
"\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
"\n or exactly (NNN)") \
- USE_FEATURE_FIND_MTIME( \
+ IF_FEATURE_FIND_MTIME( \
"\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
"\n or exactly (N) days") \
- USE_FEATURE_FIND_MMIN( \
+ IF_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
"\n or exactly (N) minutes") \
- USE_FEATURE_FIND_NEWER( \
+ IF_FEATURE_FIND_NEWER( \
"\n -newer FILE Modified time is more recent than FILE's") \
- USE_FEATURE_FIND_INUM( \
+ IF_FEATURE_FIND_INUM( \
"\n -inum N File has inode number N") \
- USE_FEATURE_FIND_USER( \
+ IF_FEATURE_FIND_USER( \
"\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
- USE_FEATURE_FIND_GROUP( \
+ IF_FEATURE_FIND_GROUP( \
"\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
- USE_FEATURE_FIND_DEPTH( \
+ IF_FEATURE_FIND_DEPTH( \
"\n -depth Process directory name after traversing it") \
- USE_FEATURE_FIND_SIZE( \
+ IF_FEATURE_FIND_SIZE( \
"\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \
"\n +/-N: file size is bigger/smaller than N") \
"\n -print Print (default and assumed)" \
- USE_FEATURE_FIND_PRINT0( \
+ IF_FEATURE_FIND_PRINT0( \
"\n -print0 Delimit output with null characters rather than" \
"\n newlines") \
- USE_FEATURE_FIND_CONTEXT ( \
+ IF_FEATURE_FIND_CONTEXT ( \
"\n -context File has specified security context") \
- USE_FEATURE_FIND_EXEC( \
- "\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \
+ IF_FEATURE_FIND_EXEC( \
+ "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
"\n matching files") \
- USE_FEATURE_FIND_PRUNE( \
+ IF_FEATURE_FIND_PRUNE( \
"\n -prune Stop traversing current subtree") \
- USE_FEATURE_FIND_DELETE( \
+ IF_FEATURE_FIND_DELETE( \
"\n -delete Delete files, turns on -depth option") \
- USE_FEATURE_FIND_PAREN( \
+ IF_FEATURE_FIND_PAREN( \
"\n (EXPR) Group an expression") \
#define find_example_usage \
"$ find / -name passwd\n" \
"/etc/passwd\n"
+#define flash_lock_trivial_usage \
+ "MTD_DEVICE OFFSET SECTORS"
+#define flash_lock_full_usage "\n\n" \
+ "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
+ "will be locked, regardless of the value of OFFSET"
+
+#define flash_unlock_trivial_usage \
+ "MTD_DEVICE"
+#define flash_unlock_full_usage "\n\n" \
+ "Unlock an MTD device"
+
+#define flash_eraseall_trivial_usage \
+ "[-jq] MTD_DEVICE"
+#define flash_eraseall_full_usage "\n\n" \
+ "Erase an MTD device\n" \
+ "\nOptions:" \
+ "\n -j format the device for jffs2" \
+ "\n -q don't display progress messages"
+
#define fold_trivial_usage \
"[-bs] [-w WIDTH] [FILE]"
-#define fold_full_usage \
+#define fold_full_usage "\n\n" \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
"standard output\n" \
"\nOptions:" \
#define free_trivial_usage \
""
-#define free_full_usage \
+#define free_full_usage "\n\n" \
"Display the amount of free and used system memory"
#define free_example_usage \
"$ free\n" \
#define freeramdisk_trivial_usage \
"DEVICE"
-#define freeramdisk_full_usage \
+#define freeramdisk_full_usage "\n\n" \
"Free all memory used by the specified ramdisk"
#define freeramdisk_example_usage \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
"[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]"
-#define fsck_full_usage \
+#define fsck_full_usage "\n\n" \
"Check and repair filesystems\n" \
"\nOptions:" \
"\n -A Walk /etc/fstab and check all filesystems" \
#define fsck_minix_trivial_usage \
"[-larvsmf] /dev/name"
-#define fsck_minix_full_usage \
- "Perform a consistency check for MINIX filesystems\n" \
+#define fsck_minix_full_usage "\n\n" \
+ "Check MINIX filesystem\n" \
"\nOptions:" \
"\n -l List all filenames" \
"\n -r Perform interactive repairs" \
"\n -a Perform automatic repairs" \
"\n -v Verbose" \
- "\n -s Output super-block information" \
- "\n -m Activate MINIX-like \"mode not cleared\" warnings" \
+ "\n -s Output superblock information" \
+ "\n -m Show \"mode not cleared\" warnings" \
"\n -f Force file system check" \
+#define ftpd_trivial_usage \
+ "[-wvS] [-t N] [-T N] [DIR]"
+#define ftpd_full_usage "\n\n" \
+ "FTP server\n" \
+ "\n" \
+ "ftpd should be used as an inetd service.\n" \
+ "ftpd's line for inetd.conf:\n" \
+ " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
+ "It also can be ran from tcpsvd:\n" \
+ " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
+ "\nOptions:" \
+ "\n -w Allow upload" \
+ "\n -v Log to stderr" \
+ "\n -S Log to syslog" \
+ "\n -t,-T Idle and absolute timeouts" \
+ "\n DIR Change root to this directory" \
+
#define ftpget_trivial_usage \
- "[options] remote-host local-file remote-file"
-#define ftpget_full_usage \
+ "[OPTIONS] HOST LOCAL_FILE REMOTE_FILE"
+#define ftpget_full_usage "\n\n" \
"Retrieve a remote file via FTP\n" \
"\nOptions:" \
- USE_GETOPT_LONG( \
+ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c,--continue Continue previous transfer" \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c Continue previous transfer" \
"\n -v Verbose" \
"\n -u Username" \
)
#define ftpput_trivial_usage \
- "[options] remote-host remote-file local-file"
-#define ftpput_full_usage \
+ "[OPTIONS] HOST REMOTE_FILE LOCAL_FILE"
+#define ftpput_full_usage "\n\n" \
"Store a local file on a remote machine via FTP\n" \
"\nOptions:" \
- USE_GETOPT_LONG( \
+ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -u Username" \
"\n -p Password" \
)
#define fuser_trivial_usage \
- "[options] FILE or PORT/PROTO"
-#define fuser_full_usage \
+ "[OPTIONS] FILE or PORT/PROTO"
+#define fuser_full_usage "\n\n" \
"Find processes which use FILEs or PORTs\n" \
"\nOptions:" \
"\n -m Find processes which use same fs as FILEs" \
"\n -k Kill found processes (otherwise display PIDs)" \
"\n -SIGNAL Signal to send (default: TERM)" \
-#define getenforce_trivial_usage
-#define getenforce_full_usage
+#define getenforce_trivial_usage NOUSAGE_STR
+#define getenforce_full_usage ""
#define getopt_trivial_usage \
- "[OPTIONS]..."
-#define getopt_full_usage \
- "Parse command options\n" \
- USE_GETOPT_LONG( \
+ "[OPTIONS]"
+#define getopt_full_usage "\n\n" \
+ "Parse options\n" \
+ IF_LONG_OPTS( \
"\n -a,--alternative Allow long options starting with single -" \
"\n -l,--longoptions=longopts Long options to be recognized" \
"\n -n,--name=progname The name under which errors are reported" \
"\n -T,--test Test for getopt(1) version" \
"\n -u,--unquoted Don't quote the output" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_LONG_OPTS( \
"\n -a Allow long options starting with single -" \
"\n -l longopts Long options to be recognized" \
"\n -n progname The name under which errors are reported" \
#define getsebool_trivial_usage \
"-a or getsebool boolean..."
-#define getsebool_full_usage \
+#define getsebool_full_usage "\n\n" \
" -a Show all SELinux booleans"
#define getty_trivial_usage \
"[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
-#define getty_full_usage \
+#define getty_full_usage "\n\n" \
"Open a tty, prompt for a login name, then invoke /bin/login\n" \
"\nOptions:" \
"\n -h Enable hardware (RTS/CTS) flow control" \
#define grep_trivial_usage \
"[-HhrilLnqvso" \
- USE_DESKTOP("w") \
+ IF_DESKTOP("w") \
"eF" \
- USE_FEATURE_GREP_EGREP_ALIAS("E") \
- USE_FEATURE_GREP_CONTEXT("ABC") \
- "] PATTERN [FILEs...]"
-#define grep_full_usage \
+ IF_FEATURE_GREP_EGREP_ALIAS("E") \
+ IF_FEATURE_GREP_CONTEXT("ABC") \
+ IF_EXTRA_COMPAT("z") \
+ "] PATTERN [FILE]..."
+#define grep_full_usage "\n\n" \
"Search for PATTERN in each FILE or standard input\n" \
"\nOptions:" \
"\n -H Prefix output lines with filename where match was found" \
"\n -c Only print count of matching lines" \
"\n -o Show only the part of a line that matches PATTERN" \
"\n -m MAX Match up to MAX times per file" \
- USE_DESKTOP( \
+ IF_DESKTOP( \
"\n -w Match whole words only") \
"\n -F PATTERN is a set of newline-separated strings" \
- USE_FEATURE_GREP_EGREP_ALIAS( \
+ IF_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
"\n -e PTRN Pattern to match" \
"\n -f FILE Read pattern from file" \
- USE_FEATURE_GREP_CONTEXT( \
+ IF_FEATURE_GREP_CONTEXT( \
"\n -A Print NUM lines of trailing context" \
"\n -B Print NUM lines of leading context" \
"\n -C Print NUM lines of output context") \
+ IF_EXTRA_COMPAT( \
+ "\n -z Input is NUL terminated") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
"$ grep ^[rR]oo. /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n"
+#define egrep_trivial_usage NOUSAGE_STR
+#define egrep_full_usage ""
+
+#define fgrep_trivial_usage NOUSAGE_STR
+#define fgrep_full_usage ""
+
#define gunzip_trivial_usage \
- "[OPTION]... [FILE]..."
-#define gunzip_full_usage \
+ "[OPTIONS] [FILE]..."
+#define gunzip_full_usage "\n\n" \
"Uncompress FILEs (or standard input)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
#define gzip_trivial_usage \
- "[OPTION]... [FILE]..."
-#define gzip_full_usage \
+ "[OPTIONS] [FILE]..."
+#define gzip_full_usage "\n\n" \
"Compress FILEs (or standard input)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
- "[-d delay] [-n] [-f]"
-#define halt_full_usage \
+ "[-d delay] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
+#define halt_full_usage "\n\n" \
"Halt the system\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
"\n -n No call to sync()" \
"\n -f Force halt (don't go through init)" \
- USE_FEATURE_WTMP( \
+ IF_FEATURE_WTMP( \
"\n -w Only write a wtmp record" \
)
#define hdparm_trivial_usage \
- "[options] [device] .."
-#define hdparm_full_usage \
+ "[OPTIONS] [DEVICE]"
+#define hdparm_full_usage "\n\n" \
"Options:" \
"\n -a Get/set fs readahead" \
"\n -A Set drive read-lookahead flag (0/1)" \
"\n -B Set Advanced Power Management setting (1-255)" \
"\n -c Get/set IDE 32-bit IO setting" \
"\n -C Check IDE power mode status" \
- USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
+ IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
"\n -d Get/set using_dma flag") \
"\n -D Enable/disable drive defect-mgmt" \
"\n -f Flush buffer cache for device on exit" \
"\n -g Display drive geometry" \
"\n -h Display terse usage information" \
- USE_FEATURE_HDPARM_GET_IDENTITY( \
+ IF_FEATURE_HDPARM_GET_IDENTITY( \
"\n -i Display drive identification") \
- USE_FEATURE_HDPARM_GET_IDENTITY( \
+ IF_FEATURE_HDPARM_GET_IDENTITY( \
"\n -I Detailed/current information directly from drive") \
"\n -k Get/set keep_settings_over_reset flag (0/1)" \
"\n -K Set drive keep_features_over_reset flag (0/1)" \
"\n -n Get/set ignore-write-errors flag (0/1)" \
"\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
"\n -P Set drive prefetch count" \
- "\n -q Change next setting quietly" \
+/* "\n -q Change next setting quietly" - not supported ib bbox */ \
"\n -Q Get/set DMA tagged-queuing depth (if supported)" \
"\n -r Get/set readonly flag (DANGEROUS to set)" \
- USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
+ IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
"\n -R Register an IDE interface (DANGEROUS)") \
"\n -S Set standby (spindown) timeout" \
"\n -t Perform device read timings" \
"\n -T Perform cache read timings" \
"\n -u Get/set unmaskirq flag (0/1)" \
- USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
+ IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
"\n -U Un-register an IDE interface (DANGEROUS)") \
"\n -v Defaults; same as -mcudkrag for IDE drives" \
"\n -V Display program version and exit immediately" \
- USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
+ IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
"\n -w Perform device reset (DANGEROUS)") \
"\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
- USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
+ IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
"\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
"\n -X Set IDE xfer mode (DANGEROUS)" \
"\n -y Put IDE drive in standby mode" \
"\n -z Re-read partition table" \
#define head_trivial_usage \
- "[OPTION]... [FILE]..."
-#define head_full_usage \
+ "[OPTIONS] [FILE]..."
+#define head_full_usage "\n\n" \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
"file name. With no FILE, or when FILE is -, read standard input.\n" \
"\nOptions:" \
"\n -n NUM Print first NUM lines instead of first 10" \
- USE_FEATURE_FANCY_HEAD( \
+ IF_FEATURE_FANCY_HEAD( \
"\n -c NUM Output the first NUM bytes" \
"\n -q Never output headers giving file names" \
"\n -v Always output headers giving file names") \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define hexdump_trivial_usage \
- "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
-#define hexdump_full_usage \
+ "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
+#define hexdump_full_usage "\n\n" \
"Display file(s) or standard input in a user specified format\n" \
"\nOptions:" \
"\n -b One-byte octal display" \
"\n -s OFFSET Skip OFFSET bytes" \
"\n -v Display all input data" \
"\n -x Two-byte hexadecimal display" \
- USE_FEATURE_HEXDUMP_REVERSE( \
+ IF_FEATURE_HEXDUMP_REVERSE( \
"\n -R Reverse of 'hexdump -Cv'") \
#define hd_trivial_usage \
"FILE..."
-#define hd_full_usage \
+#define hd_full_usage "\n\n" \
"hd is an alias for hexdump -C"
#define hostid_trivial_usage \
""
-#define hostid_full_usage \
+#define hostid_full_usage "\n\n" \
"Print out a unique 32-bit identifier for the machine"
#define hostname_trivial_usage \
- "[OPTION] [hostname | -F FILE]"
-#define hostname_full_usage \
+ "[OPTIONS] [HOSTNAME | -F FILE]"
+#define hostname_full_usage "\n\n" \
"Get or set hostname or DNS domain name\n" \
"\nOptions:" \
"\n -s Short" \
"\n -i Addresses for the hostname" \
"\n -d DNS domain name" \
"\n -f Fully qualified domain name" \
- "\n -F FILE Use the contents of FILE to specify the hostname" \
+ "\n -F FILE Use FILE's content as hostname" \
#define hostname_example_usage \
"$ hostname\n" \
"sage\n"
+#define dnsdomainname_trivial_usage NOUSAGE_STR
+#define dnsdomainname_full_usage ""
+
#define httpd_trivial_usage \
- "[-c conffile]" \
- " [-p [ip:]port]" \
- " [-i] [-f] [-v[v]]" \
- USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
- USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \
- USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
- " [-h home]" \
- " [-d/-e string]"
-#define httpd_full_usage \
+ "[-ifv[v]]" \
+ " [-c CONFFILE]" \
+ " [-p [IP:]PORT]" \
+ IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
+ IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
+ " [-h HOME]\n" \
+ "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
+#define httpd_full_usage "\n\n" \
"Listen for incoming HTTP requests\n" \
"\nOptions:" \
- "\n -c FILE Configuration file (default httpd.conf)" \
- "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
"\n -i Inetd mode" \
"\n -f Do not daemonize" \
"\n -v[v] Verbose" \
- USE_FEATURE_HTTPD_SETUID( \
+ "\n -c FILE Configuration file (default httpd.conf)" \
+ "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
+ IF_FEATURE_HTTPD_SETUID( \
"\n -u USER[:GRP] Set uid/gid after binding to port") \
- USE_FEATURE_HTTPD_BASIC_AUTH( \
+ IF_FEATURE_HTTPD_BASIC_AUTH( \
"\n -r REALM Authentication Realm for Basic Authentication") \
- USE_FEATURE_HTTPD_AUTH_MD5( \
- "\n -m PASS Crypt PASS with md5 algorithm") \
"\n -h HOME Home directory (default .)" \
+ IF_FEATURE_HTTPD_AUTH_MD5( \
+ "\n -m STRING MD5 crypt STRING") \
"\n -e STRING HTML encode STRING" \
"\n -d STRING URL decode STRING" \
#define hwclock_trivial_usage \
- USE_GETOPT_LONG( \
+ IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r|--show] [-s|--hctosys] [-w|--systohc]" \
" [-l|--localtime] [-u|--utc]" \
" [-f FILE]" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
)
-#define hwclock_full_usage \
+#define hwclock_full_usage "\n\n" \
"Query and set hardware clock (RTC)\n" \
"\nOptions:" \
- "\n -r Show time from hardware clock" \
+ "\n -r Show hardware clock time" \
"\n -s Set system time from hardware clock" \
"\n -w Set hardware clock to system time" \
"\n -u Hardware clock is in UTC" \
"\n -f FILE Use specified device (e.g. /dev/rtc2)" \
#define id_trivial_usage \
- "[OPTIONS]... [USER]"
-#define id_full_usage \
+ "[OPTIONS] [USER]"
+#define id_full_usage "\n\n" \
"Print information about USER or the current user\n" \
"\nOptions:" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Print the security context" \
) \
- "\n -g Print group ID" \
"\n -u Print user ID" \
+ "\n -g Print group ID" \
+ "\n -G Print supplementary group IDs" \
"\n -n Print name instead of a number" \
"\n -r Print real user ID instead of effective ID" \
"uid=1000(andersen) gid=1000(andersen)\n"
#define ifconfig_trivial_usage \
- USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
-#define ifconfig_full_usage \
+ IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
+#define ifconfig_full_usage "\n\n" \
"Configure a network interface\n" \
"\nOptions:" \
"\n" \
- USE_FEATURE_IPV6( \
+ IF_FEATURE_IPV6( \
" [add ADDRESS[/PREFIXLEN]]\n") \
- USE_FEATURE_IPV6( \
+ IF_FEATURE_IPV6( \
" [del ADDRESS[/PREFIXLEN]]\n") \
" [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
" [netmask ADDRESS] [dstaddr ADDRESS]\n" \
- USE_FEATURE_IFCONFIG_SLIP( \
+ IF_FEATURE_IFCONFIG_SLIP( \
" [outfill NN] [keepalive NN]\n") \
- " " USE_FEATURE_IFCONFIG_HW("[hw ether ADDRESS] ") "[metric NN] [mtu NN]\n" \
+ " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
" [[-]trailers] [[-]arp] [[-]allmulti]\n" \
" [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
- USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
+ IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
" [mem_start NN] [io_addr NN] [irq NN]\n") \
" [up|down] ..."
#define ifenslave_trivial_usage \
"[-cdf] master-iface <slave-iface...>"
-#define ifenslave_full_usage \
+#define ifenslave_full_usage "\n\n" \
"Configure network interfaces for parallel routing\n" \
"\nOptions:" \
"\n -c, --change-active Change active slave" \
/* "\n -r, --receive-slave Create a receive-only slave" */
#define ifenslave_example_usage \
- "To create a bond device, simply follow these three steps :\n" \
- "- ensure that the required drivers are properly loaded :\n" \
+ "To create a bond device, simply follow these three steps:\n" \
+ "- ensure that the required drivers are properly loaded:\n" \
" # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
- "- assign an IP address to the bond device :\n" \
+ "- assign an IP address to the bond device:\n" \
" # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
- "- attach all the interfaces you need to the bond device :\n" \
+ "- attach all the interfaces you need to the bond device:\n" \
" # ifenslave bond0 eth0 eth1 eth2\n" \
" If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
" interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
- " To detach a dead interface without setting the bond device down :\n" \
- " # ifenslave -d bond0 eth1\n\n" \
- " To set the bond device down and automatically release all the slaves :\n" \
- " # ifconfig bond0 down\n\n" \
- " To change active slave :\n" \
- " # ifenslave -c bond0 eth0\n" \
+ " To detach a dead interface without setting the bond device down:\n" \
+ " # ifenslave -d bond0 eth1\n\n" \
+ " To set the bond device down and automatically release all the slaves:\n" \
+ " # ifconfig bond0 down\n\n" \
+ " To change active slave:\n" \
+ " # ifenslave -c bond0 eth0\n" \
+
+#define ifplugd_trivial_usage \
+ "[OPTIONS]"
+#define ifplugd_full_usage "\n\n" \
+ "Network interface plug detection daemon\n" \
+ "\nOptions:" \
+ "\n -n Do not daemonize" \
+ "\n -s Do not log to syslog" \
+ "\n -i IFACE Interface" \
+ "\n -f/-F Treat link detection error as link down/link up" \
+ "\n (otherwise exit on error)" \
+ "\n -a Do not up interface automatically" \
+ "\n -M Monitor creation/destruction of interface" \
+ "\n (otherwise it must exist)" \
+ "\n -r PROG Script to run" \
+ "\n -x ARG Extra argument for script" \
+ "\n -I Don't exit on nonzero exit code from script" \
+ "\n -p Don't run script on daemon startup" \
+ "\n -q Don't run script on daemon quit" \
+ "\n -l Run script on startup even if no cable is detected" \
+ "\n -t SECS Poll time in seconds" \
+ "\n -u SECS Delay before running script after link up" \
+ "\n -d SECS Delay after link down" \
+ "\n -m MODE API mode (mii, priv, ethtool, wlan, auto)" \
+ "\n -k Kill running daemon" \
#define ifup_trivial_usage \
- "[-ahinv] ifaces..."
-#define ifup_full_usage \
+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
+#define ifup_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
+ IF_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
- "\n -v Print out what would happen before doing it" \
"\n -m Don't run any mappings" \
+ ) \
+ "\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define ifdown_trivial_usage \
- "[-ahinv] ifaces..."
-#define ifdown_full_usage \
+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
+#define ifdown_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
+ IF_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
- "\n -v Print out what would happen before doing it" \
"\n -m Don't run any mappings" \
+ ) \
+ "\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define inetd_trivial_usage \
"[-fe] [-q N] [-R N] [CONFFILE]"
-#define inetd_full_usage \
+#define inetd_full_usage "\n\n" \
"Listen for network connections and launch programs\n" \
"\nOptions:" \
"\n -f Run in foreground" \
#define init_trivial_usage \
""
-#define init_full_usage \
+#define init_full_usage "\n\n" \
"Init is the parent of all processes"
#define init_notes_usage \
" ::shutdown:/bin/umount -a -r\n" \
" ::shutdown:/sbin/swapoff -a\n"
+#define inotifyd_trivial_usage \
+ "PROG FILE1[:MASK] ..."
+#define inotifyd_full_usage "\n\n" \
+ "Run PROG on filesystem changes." \
+ "\nWhen a filesystem event matching MASK occurs on FILEn," \
+ "\nPROG <actual_event(s)> <FILEn> [<subfile_name>] is run." \
+ "\nEvents:" \
+ "\n a File is accessed" \
+ "\n c File is modified" \
+ "\n e Metadata changed" \
+ "\n w Writtable file is closed" \
+ "\n 0 Unwrittable file is closed" \
+ "\n r File is opened" \
+ "\n D File is deleted" \
+ "\n M File is moved" \
+ "\n u Backing fs is unmounted" \
+ "\n o Event queue overflowed" \
+ "\n x File can't be watched anymore" \
+ "\nIf watching a directory:" \
+ "\n m Subfile is moved into dir" \
+ "\n y Subfile is moved out of dir" \
+ "\n n Subfile is created" \
+ "\n d Subfile is deleted" \
+ "\n" \
+ "\ninotifyd waits for PROG to exit." \
+ "\nWhen x event happens for all FILEs, inotifyd exits" \
+
+/* 2.6 style insmod has no options and required filename
+ * (not module name - .ko can't be omitted) */
#define insmod_trivial_usage \
- USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..."
-#define insmod_full_usage \
+ IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
+ IF_NOT_FEATURE_2_4_MODULES("FILE ") \
+ "[symbol=value]..."
+#define insmod_full_usage "\n\n" \
"Load the specified kernel modules into the kernel" \
- USE_FEATURE_2_4_MODULES( "\n" \
+ IF_FEATURE_2_4_MODULES( "\n" \
"\nOptions:" \
"\n -f Force module to load into the wrong kernel version" \
"\n -k Make module autoclean-able" \
"\n -v Verbose" \
"\n -q Quiet" \
"\n -L Lock to prevent simultaneous loads of a module" \
- USE_FEATURE_INSMOD_LOAD_MAP( \
+ IF_FEATURE_INSMOD_LOAD_MAP( \
"\n -m Output load map to stdout" \
) \
"\n -o NAME Set internal module name to NAME" \
"\n -x Do not export externs" \
)
+/* -v, -b, -c are ignored */
#define install_trivial_usage \
- "[-cgmops] [sources] dest|directory"
-#define install_full_usage \
+ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory"
+#define install_full_usage "\n\n" \
"Copy files and set attributes\n" \
"\nOptions:" \
- "\n -c Copy the file, default" \
+ "\n -c Just copy (default)" \
"\n -d Create directories" \
- "\n -g Set group ownership" \
- "\n -m Set permissions" \
- "\n -o Set ownership" \
+ "\n -D Create leading target directories" \
+ "\n -s Strip symbol table" \
"\n -p Preserve date" \
- "\n -s Strip symbol tables" \
- USE_SELINUX( \
- "\n -Z Set security context of copy" \
+ "\n -o USER Set ownership" \
+ "\n -g GRP Set group ownership" \
+ "\n -m MODE Set permissions" \
+ IF_SELINUX( \
+ "\n -Z Set security context" \
)
+#define ionice_trivial_usage \
+ "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
+#define ionice_full_usage "\n\n" \
+ "Change I/O scheduling class and priority\n" \
+ "\nOptions:" \
+ "\n -c Class. 1:realtime 2:best-effort 3:idle" \
+ "\n -n Priority" \
+
/* would need to make the " | " optional depending on more than one selected: */
#define ip_trivial_usage \
"[OPTIONS] {" \
- USE_FEATURE_IP_ADDRESS("address | ") \
- USE_FEATURE_IP_ROUTE("route | ") \
- USE_FEATURE_IP_LINK("link | ") \
- USE_FEATURE_IP_TUNNEL("tunnel | ") \
- USE_FEATURE_IP_RULE("rule") \
+ IF_FEATURE_IP_ADDRESS("address | ") \
+ IF_FEATURE_IP_ROUTE("route | ") \
+ IF_FEATURE_IP_LINK("link | ") \
+ IF_FEATURE_IP_TUNNEL("tunnel | ") \
+ IF_FEATURE_IP_RULE("rule") \
"} {COMMAND}"
-#define ip_full_usage \
+#define ip_full_usage "\n\n" \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
"where OBJECT := {" \
- USE_FEATURE_IP_ADDRESS("address | ") \
- USE_FEATURE_IP_ROUTE("route | ") \
- USE_FEATURE_IP_LINK("link | ") \
- USE_FEATURE_IP_TUNNEL("tunnel | ") \
- USE_FEATURE_IP_RULE("rule") \
+ IF_FEATURE_IP_ADDRESS("address | ") \
+ IF_FEATURE_IP_ROUTE("route | ") \
+ IF_FEATURE_IP_LINK("link | ") \
+ IF_FEATURE_IP_TUNNEL("tunnel | ") \
+ IF_FEATURE_IP_RULE("rule") \
"}\n" \
"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
" [dev STRING] [to PREFIX] }"
-#define ipaddr_full_usage \
+#define ipaddr_full_usage "\n\n" \
"ipaddr {add|delete} IFADDR dev STRING\n" \
"ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
" [to PREFIX] [label PATTERN]\n" \
" SCOPE-ID := [host | link | global | NUMBER]" \
#define ipcalc_trivial_usage \
- "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]"
-#define ipcalc_full_usage \
+ "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
+#define ipcalc_full_usage "\n\n" \
"Calculate IP network settings from a IP address\n" \
"\nOptions:" \
- USE_FEATURE_IPCALC_LONG_OPTIONS( \
+ IF_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b,--broadcast Display calculated broadcast address" \
"\n -n,--network Display calculated network address" \
"\n -m,--netmask Display default netmask for IP" \
- USE_FEATURE_IPCALC_FANCY( \
+ IF_FEATURE_IPCALC_FANCY( \
"\n -p,--prefix Display the prefix for IP/NETMASK" \
"\n -h,--hostname Display first resolved host name" \
"\n -s,--silent Don't ever display error messages" \
) \
) \
- SKIP_FEATURE_IPCALC_LONG_OPTIONS( \
+ IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b Display calculated broadcast address" \
"\n -n Display calculated network address" \
"\n -m Display default netmask for IP" \
- USE_FEATURE_IPCALC_FANCY( \
+ IF_FEATURE_IPCALC_FANCY( \
"\n -p Display the prefix for IP/NETMASK" \
"\n -h Display first resolved host name" \
"\n -s Don't ever display error messages" \
#define ipcrm_trivial_usage \
"[-MQS key] [-mqs id]"
-#define ipcrm_full_usage \
+#define ipcrm_full_usage "\n\n" \
"Upper-case options MQS remove an object by shmkey value.\n" \
"Lower-case options remove an object by shmid value.\n" \
"\nOptions:" \
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
-#define ipcs_full_usage \
+#define ipcs_full_usage "\n\n" \
" -i Show specific resource" \
"\nResource specification:" \
"\n -m Shared memory segments" \
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
-#define iplink_full_usage \
+#define iplink_full_usage "\n\n" \
"iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
" replace | monitor } ROUTE }"
-#define iproute_full_usage \
+#define iproute_full_usage "\n\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [from ADDRESS iif STRING]\n" \
" [oif STRING] [tos TOS]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
" SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
- " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" \
+ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
+ " [metric METRIC]" \
#define iprule_trivial_usage \
"{[list | add | del] RULE}"
-#define iprule_full_usage \
+#define iprule_full_usage "\n\n" \
"iprule [list | add | del] SELECTOR ACTION\n" \
" SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
" [dev STRING] [pref NUMBER]\n" \
"{ add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }]\n" \
" [remote ADDR] [local ADDR] [ttl TTL]"
-#define iptunnel_full_usage \
+#define iptunnel_full_usage "\n\n" \
"iptunnel { add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
" [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
" [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
#define kbd_mode_trivial_usage \
- "[-a|k|s|u]"
-#define kbd_mode_full_usage \
+ "[-a|k|s|u] [-C TTY]"
+#define kbd_mode_full_usage "\n\n" \
"Report or set the keyboard mode\n" \
"\nOptions set mode:" \
"\n -a Default (ASCII)" \
"\n -k Medium-raw (keyboard)" \
"\n -s Raw (scancode)" \
"\n -u Unicode (utf-8)" \
+ "\n -C TTY Affect TTY instead of /dev/tty" \
#define kill_trivial_usage \
- "[-l] [-signal] process-id..."
-#define kill_full_usage \
- "Send a signal (default is TERM) to the specified process(es)\n" \
+ "[-l] [-SIG] PID..."
+#define kill_full_usage "\n\n" \
+ "Send a signal (default is TERM) to given PIDs\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
#define kill_example_usage \
"$ ps | grep apache\n" \
"$ kill 252\n"
#define killall_trivial_usage \
- "[-l] [-q] [-signal] process-name..."
-#define killall_full_usage \
- "Send a signal (default is TERM) to the specified process(es)\n" \
+ "[-l] [-q] [-SIG] process-name..."
+#define killall_full_usage "\n\n" \
+ "Send a signal (default is TERM) to given processes\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
"\n -q Do not complain if no processes were killed" \
#define killall_example_usage \
"$ killall apache\n"
#define killall5_trivial_usage \
- "[-l] [-signal]"
-#define killall5_full_usage \
+ "[-l] [-SIG] [-o PID]..."
+#define killall5_full_usage "\n\n" \
"Send a signal (default is TERM) to all processes outside current session\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
+ "\n -o PID Do not signal this PID" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
#define klogd_trivial_usage \
- "[-c n] [-n]"
-#define klogd_full_usage \
+ "[-c N] [-n]"
+#define klogd_full_usage "\n\n" \
"Kernel logger\n" \
"\nOptions:" \
- "\n -c n Set the default log level of console messages to n" \
+ "\n -c N Only messages with level < N are printed to console" \
"\n -n Run in foreground" \
#define length_trivial_usage \
"STRING"
-#define length_full_usage \
+#define length_full_usage "\n\n" \
"Print STRING's length"
#define length_example_usage \
"5\n"
#define less_trivial_usage \
- "[-EMNmh~?] [FILE...]"
-#define less_full_usage \
+ "[-EMNmh~I?] [FILE]..."
+#define less_full_usage "\n\n" \
"View a file or list of files. The position within files can be\n" \
"changed, and files can be manipulated in various ways.\n" \
"\nOptions:" \
"\n -M,-m Display a status line containing the line numbers" \
"\n and percentage through the file" \
"\n -N Prefix line numbers to each line" \
+ "\n -I Ignore case in all searches" \
"\n -~ Suppress ~s displayed past the end of the file" \
+#define linux32_trivial_usage NOUSAGE_STR
+#define linux32_full_usage ""
+#define linux64_trivial_usage NOUSAGE_STR
+#define linux64_full_usage ""
+
+#define linuxrc_trivial_usage NOUSAGE_STR
+#define linuxrc_full_usage ""
+
#define setarch_trivial_usage \
"personality program [args...]"
-#define setarch_full_usage \
+#define setarch_full_usage "\n\n" \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
" linux64 Set 64bit uname emulation" \
#define ln_trivial_usage \
- "[OPTION] TARGET... LINK_NAME|DIRECTORY"
-#define ln_full_usage \
+ "[OPTIONS] TARGET... LINK_NAME|DIRECTORY"
+#define ln_full_usage "\n\n" \
"Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
"Use '--' to indicate that all following arguments are non-options.\n" \
"\nOptions:" \
"$ ls -l /tmp/ls\n" \
"lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
-#define load_policy_trivial_usage
-
-#define load_policy_full_usage
+#define load_policy_trivial_usage NOUSAGE_STR
+#define load_policy_full_usage ""
#define loadfont_trivial_usage \
"< font"
-#define loadfont_full_usage \
- "Load a console font from standard input"
+#define loadfont_full_usage "\n\n" \
+ "Load a console font from standard input" \
+/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
+
#define loadfont_example_usage \
"$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
-#define loadkmap_full_usage \
- "Load a binary keyboard translation table from standard input"
+#define loadkmap_full_usage "\n\n" \
+ "Load a binary keyboard translation table from standard input\n" \
+/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
+
#define loadkmap_example_usage \
"$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
- "[OPTION]... [MESSAGE]"
-#define logger_full_usage \
+ "[OPTIONS] [MESSAGE]"
+#define logger_full_usage "\n\n" \
"Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \
"\nOptions:" \
"\n -s Log to stderr as well as the system log" \
#define login_trivial_usage \
"[-p] [-h HOST] [[-f] USER]"
-#define login_full_usage \
+#define login_full_usage "\n\n" \
"Begin a new session on the system\n" \
"\nOptions:" \
"\n -f Do not authenticate (user already authenticated)" \
#define logname_trivial_usage \
""
-#define logname_full_usage \
+#define logname_full_usage "\n\n" \
"Print the name of the current user"
#define logname_example_usage \
"$ logname\n" \
"root\n"
#define logread_trivial_usage \
- "[OPTION]..."
-#define logread_full_usage \
+ "[OPTIONS]"
+#define logread_full_usage "\n\n" \
"Show messages in syslogd's circular buffer\n" \
"\nOptions:" \
"\n -f Output data as log grows" \
"[-o OFS] LOOPDEV FILE - associate loop devices\n" \
" losetup -d LOOPDEV - disassociate\n" \
" losetup [-f] - show"
-#define losetup_full_usage \
+#define losetup_full_usage "\n\n" \
"Options:" \
"\n -o OFS Start OFS bytes into FILE" \
"\n -f Show first free loop device" \
"losetup -f will show the first loop free loop device\n\n"
#define lpd_trivial_usage \
- "SPOOLDIR"
-#define lpd_full_usage \
- "Example:" \
- "\n tcpsvd -E 0 515 softlimit -m 99999 lpd /var/spool"
+ "SPOOLDIR [HELPER [ARGS]]"
+#define lpd_full_usage "\n\n" \
+ "SPOOLDIR must contain (symlinks to) device nodes or directories" \
+ "\nwith names matching print queue names. In the first case, jobs are" \
+ "\nsent directly to the device. Otherwise each job is stored in queue" \
+ "\ndirectory and HELPER program is called. Name of file to print" \
+ "\nis passed in $DATAFILE variable." \
+ "\nExample:" \
+ "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
#define lpq_trivial_usage \
"[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]"
-#define lpq_full_usage \
+#define lpq_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)" \
"\n -d Delete jobs" \
"\n -s Short display" \
#define lpr_trivial_usage \
- "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE...]"
+ "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
/* -C CLASS exists too, not shown.
* CLASS is supposed to be printed on banner page, if one is requested */
-#define lpr_full_usage \
+#define lpr_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)"\
"\n -m Send mail on completion" \
"\n -V Verbose" \
#define ls_trivial_usage \
- "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
- USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
- USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
- USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
- USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
- USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \
- USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
- USE_SELINUX("K") "] [filenames...]"
-#define ls_full_usage \
+ "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
+ IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
+ IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
+ IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
+ IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
+ IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
+ IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
+ IF_SELINUX("K") "] [FILE]..."
+#define ls_full_usage "\n\n" \
"List directory contents\n" \
"\nOptions:" \
- "\n -1 List files in a single column" \
- "\n -A Do not list implied . and .." \
- "\n -a Do not hide entries starting with ." \
- "\n -C List entries by columns" \
- USE_FEATURE_LS_TIMESTAMPS( \
- "\n -c With -l: show ctime") \
- USE_FEATURE_LS_COLOR( \
+ "\n -1 List in a single column" \
+ "\n -A Don't list . and .." \
+ "\n -a Don't hide entries starting with ." \
+ "\n -C List by columns" \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -c With -l: sort by ctime") \
+ IF_FEATURE_LS_COLOR( \
"\n --color[={always,never,auto}] Control coloring") \
"\n -d List directory entries instead of contents" \
- USE_FEATURE_LS_TIMESTAMPS( \
- "\n -e List both full date and full time") \
- USE_FEATURE_LS_FILETYPES( \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -e List full date and time") \
+ IF_FEATURE_LS_FILETYPES( \
"\n -F Append indicator (one of */=@|) to entries") \
- "\n -i List the i-node for each file" \
- "\n -l Use a long listing format" \
+ "\n -i List inode numbers" \
+ "\n -l Long listing format" \
"\n -n List numeric UIDs and GIDs instead of names" \
- USE_FEATURE_LS_FILETYPES( \
+ IF_FEATURE_LS_FILETYPES( \
"\n -p Append indicator (one of /=@|) to entries") \
- USE_FEATURE_LS_FOLLOWLINKS( \
+ IF_FEATURE_LS_FOLLOWLINKS( \
"\n -L List entries pointed to by symlinks") \
- USE_FEATURE_LS_RECURSIVE( \
+ IF_FEATURE_LS_RECURSIVE( \
"\n -R List subdirectories recursively") \
- USE_FEATURE_LS_SORTFILES( \
- "\n -r Sort the listing in reverse order") \
- USE_FEATURE_LS_SORTFILES( \
- "\n -S Sort the listing by file size") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -r Sort in reverse order") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -S Sort by file size") \
"\n -s List the size of each file, in blocks" \
- USE_FEATURE_AUTOWIDTH( \
- "\n -T NUM Assume Tabstop every NUM columns") \
- USE_FEATURE_LS_TIMESTAMPS( \
- "\n -t With -l: show modification time") \
- USE_FEATURE_LS_TIMESTAMPS( \
- "\n -u With -l: show access time") \
- USE_FEATURE_LS_SORTFILES( \
- "\n -v Sort the listing by version") \
- USE_FEATURE_AUTOWIDTH( \
+ IF_FEATURE_AUTOWIDTH( \
+ "\n -T NUM Assume tabstop every NUM columns") \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -t With -l: sort by modification time") \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -u With -l: sort by access time") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -v Sort by version") \
+ IF_FEATURE_AUTOWIDTH( \
"\n -w NUM Assume the terminal is NUM columns wide") \
- "\n -x List entries by lines instead of by columns" \
- USE_FEATURE_LS_SORTFILES( \
- "\n -X Sort the listing by extension") \
- USE_FEATURE_HUMAN_READABLE( \
- "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
- USE_SELINUX( \
- "\n -k Print security context") \
- USE_SELINUX( \
- "\n -K Print security context in long format") \
- USE_SELINUX( \
- "\n -Z Print security context and permission") \
+ "\n -x List by lines" \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -X Sort by extension") \
+ IF_FEATURE_HUMAN_READABLE( \
+ "\n -h List sizes in human readable format (1K 243M 2G)") \
+ IF_SELINUX( \
+ "\n -k List security context") \
+ IF_SELINUX( \
+ "\n -K List security context in long format") \
+ IF_SELINUX( \
+ "\n -Z List security context and permission") \
#define lsattr_trivial_usage \
- "[-Radlv] [files...]"
-#define lsattr_full_usage \
+ "[-Radlv] [FILE]..."
+#define lsattr_full_usage "\n\n" \
"List file attributes on an ext2 fs\n" \
"\nOptions:" \
"\n -R Recursively list subdirectories" \
"\n -a Do not hide entries starting with ." \
"\n -d List directory entries instead of contents" \
- "\n -l Print long flag names" \
+ "\n -l List long flag names" \
"\n -v List the file's version/generation number" \
#define lsmod_trivial_usage \
""
-#define lsmod_full_usage \
+#define lsmod_full_usage "\n\n" \
"List the currently loaded kernel modules"
#if ENABLE_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
-#define makedevs_full_usage \
- "Create a range of block or character special files\n\n" \
- "TYPEs include:\n" \
- " b: Make a block (buffered) device\n" \
- " c or u: Make a character (un-buffered) device\n" \
- " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \
- "\n" \
- "FIRST specifies the number appended to NAME to create the first device.\n" \
- "LAST specifies the number of the last item that should be created\n" \
- "If 's' is the last argument, the base device is created as well.\n\n" \
- "For example:\n" \
- " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
- " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
+#define makedevs_full_usage "\n\n" \
+ "Create a range of block or character special files" \
+ "\n" \
+ "\nTYPE is:" \
+ "\n b Block device" \
+ "\n c Character device" \
+ "\n f FIFO, MAJOR and MINOR are ignored" \
+ "\n" \
+ "\nFIRST..LAST specify numbers appended to NAME." \
+ "\nIf 's' is the last argument, the base device is created as well." \
+ "\n" \
+ "\nExamples:" \
+ "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
+ "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
"# makedevs /dev/ttyS c 4 66 2 63\n" \
"[creates ttyS2-ttyS63]\n" \
#if ENABLE_FEATURE_MAKEDEVS_TABLE
#define makedevs_trivial_usage \
"[-d device_table] rootdir"
-#define makedevs_full_usage \
+#define makedevs_full_usage "\n\n" \
"Create a range of special files as specified in a device table.\n" \
"Device table entries take the form of:\n" \
"<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
"Where name is the file name, type can be one of:\n" \
- " f A regular file\n" \
+ " f Regular file\n" \
" d Directory\n" \
- " c Character special device file\n" \
- " b Block special device file\n" \
+ " c Character device\n" \
+ " b Block device\n" \
" p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"/dev/hda[0-15]\n"
#endif
+#define makemime_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define makemime_full_usage "\n\n" \
+ "Create multipart MIME-encoded message from FILEs.\n" \
+/* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
+ "\nOptions:" \
+ "\n -o FILE Output. Default: stdout" \
+ "\n -a HDR Add header. Examples:" \
+ "\n \"From: user@host.org\", \"Date: `date -R`\"" \
+ "\n -c CT Content type. Default: text/plain" \
+ "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
+/* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
+ "\n" \
+ "\nOther options are silently ignored" \
+
+#define man_trivial_usage \
+ "[OPTIONS] [MANPAGE]..."
+#define man_full_usage "\n\n" \
+ "Format and display manual page\n" \
+ "\nOptions:" \
+ "\n -a Display all pages" \
+ "\n -w Show page locations" \
+
#define matchpathcon_trivial_usage \
"[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
-#define matchpathcon_full_usage \
+#define matchpathcon_full_usage "\n\n" \
" -n Do not display path" \
"\n -N Do not use translations" \
"\n -f Use alternate file_context file" \
"\n -V Verify file context on disk matches defaults" \
#define md5sum_trivial_usage \
- "[OPTION] [FILEs...]" \
- USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
-#define md5sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
- USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
+#define md5sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
- "\n -c Check MD5 sums against given list" \
+ "\n -c Check sums against given list" \
"\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted MD5 checksum lines") \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"busybox: OK\n" \
"^D\n"
+#define sha1sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
+#define sha1sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define sha256sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
+#define sha256sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define sha512sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
+#define sha512sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
#define mdev_trivial_usage \
"[-s]"
-#define mdev_full_usage \
+#define mdev_full_usage "\n\n" \
" -s Scan /sys and populate /dev during system boot\n" \
"\n" \
- "Called with no options (via hotplug) it uses environment variables\n" \
- "to determine which device to add/remove."
+ "It can be run by kernel as a hotplug helper. To activate it:\n" \
+ " echo /bin/mdev >/proc/sys/kernel/hotplug\n" \
+ IF_FEATURE_MDEV_CONF( \
+ "It uses /etc/mdev.conf with lines\n" \
+ "[-]DEVNAME UID:GID PERM" \
+ IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
+ IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
+ ) \
#define mdev_notes_usage "" \
- USE_FEATURE_MDEV_CONFIG( \
+ IF_FEATURE_MDEV_CONFIG( \
"The mdev config file contains lines that look like:\n" \
" hd[a-z][0-9]* 0:3 660\n\n" \
"That's device name (with regex match), uid:gid, and permissions.\n\n" \
- USE_FEATURE_MDEV_EXEC( \
+ IF_FEATURE_MDEV_EXEC( \
"Optionally, that can be followed (on the same line) by a special character\n" \
"and a command line to run after creating/before deleting the corresponding\n" \
"device(s). The environment variable $MDEV indicates the active device node\n" \
#define mesg_trivial_usage \
"[y|n]"
-#define mesg_full_usage \
+#define mesg_full_usage "\n\n" \
"Control write access to your terminal\n" \
" y Allow write access to your terminal\n" \
" n Disallow write access to your terminal"
#define microcom_trivial_usage \
"[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
-#define microcom_full_usage \
+#define microcom_full_usage "\n\n" \
"Copy bytes for stdin to TTY and from TTY to stdout\n" \
"\nOptions:" \
"\n -d Wait up to DELAY ms for TTY output before sending every" \
"\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
#define mkdir_trivial_usage \
- "[OPTION] DIRECTORY..."
-#define mkdir_full_usage \
+ "[OPTIONS] DIRECTORY..."
+#define mkdir_full_usage "\n\n" \
"Create DIRECTORY\n" \
"\nOptions:" \
"\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \
"\n -p No error if existing, make parent directories as needed" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Set security context" \
)
"[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
"[-M last-mounted-directory] [-S] [-T filesystem-type] " \
"device [blocks-count]"
-#define mke2fs_full_usage \
+#define mke2fs_full_usage "\n\n" \
" -b size Block size in bytes" \
"\n -c Check for bad blocks before creating" \
"\n -E opts Set extended options" \
#define mkfifo_trivial_usage \
"[OPTIONS] name"
-#define mkfifo_full_usage \
+#define mkfifo_full_usage "\n\n" \
"Create named pipe (identical to 'mknod name p')\n" \
"\nOptions:" \
"\n -m MODE Mode (default a=rw)" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Set security context" \
)
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
-#define mkfs_minix_full_usage \
+#define mkfs_minix_full_usage "\n\n" \
"Make a MINIX filesystem\n" \
"\nOptions:" \
"\n -c Check device for bad blocks" \
"\n -l FILENAME Read bad blocks list from FILENAME" \
"\n -v Make version 2 filesystem" \
+#define mkfs_vfat_trivial_usage \
+ "[-v] [-n LABEL] FILE_OR_DEVICE [SIZE_IN_KB]"
+/* Accepted but ignored:
+ "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
+ "[-m boot-msg-file] [-i volume-id] "
+ "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
+ "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
+*/
+#define mkfs_vfat_full_usage "\n\n" \
+ "Make a FAT32 filesystem\n" \
+ "\nOptions:" \
+/* "\n -c Check device for bad blocks" */ \
+ "\n -v Verbose" \
+/* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
+ "\n -n LBL Volume label" \
+
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
-#define mknod_full_usage \
+#define mknod_full_usage "\n\n" \
"Create a special file (block, character, or pipe)\n" \
"\nOptions:" \
"\n -m Create the special file using the specified mode (default a=rw)" \
"\n b: Make a block device" \
"\n c or u: Make a character device" \
"\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Set security context" \
)
#define mkswap_trivial_usage \
"DEVICE"
-#define mkswap_full_usage \
+#define mkswap_full_usage "\n\n" \
"Prepare block device to be used as swap partition"
#if 0
"[-c] [-v0|-v1] DEVICE [BLOCKS]"
#endif
#define mktemp_trivial_usage \
- "[-dt] [-p DIR] TEMPLATE"
-#define mktemp_full_usage \
- "Create a temporary file with its name based on TEMPLATE.\n" \
- "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n" \
+ "[-dt] [-p DIR] [TEMPLATE]"
+#define mktemp_full_usage "\n\n" \
+ "Create a temporary file with name based on TEMPLATE and print its name.\n" \
+ "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
"\nOptions:" \
"\n -d Make a directory instead of a file" \
/* "\n -q Fail silently if an error occurs" - we ignore it */ \
"\n -t Generate a path rooted in temporary directory" \
"\n -p DIR Use DIR as a temporary directory (implies -t)" \
"\n" \
- "\n" \
- "For -t or -p, directory is chosen as follows:\n" \
- "$TMPDIR if set, else -p DIR, else /tmp" \
+ "\nFor -t or -p, directory is chosen as follows:" \
+ "\n$TMPDIR if set, else -p DIR, else /tmp" \
#define mktemp_example_usage \
"$ mktemp /tmp/temp.XXXXXX\n" \
#define modprobe_trivial_usage \
"[-knqrsv] MODULE [symbol=value...]"
-#define modprobe_full_usage \
+#define modprobe_full_usage "\n\n" \
"Options:" \
+ IF_FEATURE_2_4_MODULES( \
"\n -k Make module autoclean-able" \
+ ) \
"\n -n Dry run" \
"\n -q Quiet" \
"\n -r Remove module (stacks) or do autoclean" \
"\n -s Report via syslog instead of stderr" \
"\n -v Verbose" \
+ IF_FEATURE_MODPROBE_BLACKLIST( \
+ "\n -b Apply blacklist to module names too" \
+ )
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
"pass each module it loads.\n" \
"\n" \
-"The configuration file is searched (in order) amongst:\n" \
+"The configuration file is searched (in this order):\n" \
"\n" \
" /etc/modprobe.conf (2.6 only)\n" \
" /etc/modules.conf\n" \
" from the command line\n"
#define more_trivial_usage \
- "[FILE...]"
-#define more_full_usage \
+ "[FILE]..."
+#define more_full_usage "\n\n" \
"View FILE or standard input one screenful at a time"
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
- "[flags] DEVICE NODE [-o options,more-options]"
-#define mount_full_usage \
+ "[flags] DEVICE NODE [-o OPT,OPT]"
+#define mount_full_usage "\n\n" \
"Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \
"\nOptions:" \
"\n -a Mount all filesystems in fstab" \
- USE_FEATURE_MOUNT_FAKE( \
- "\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \
+ IF_FEATURE_MOUNT_FAKE( \
+ IF_FEATURE_MTAB_SUPPORT( \
+ "\n -f Update /etc/mtab, but don't mount" \
+ ) \
+ IF_NOT_FEATURE_MTAB_SUPPORT( \
+ "\n -f Dry run" \
+ ) \
+ ) \
+ IF_FEATURE_MOUNT_HELPERS( \
+ "\n -i Don't run mount helper" \
) \
- USE_FEATURE_MTAB_SUPPORT( \
+ IF_FEATURE_MTAB_SUPPORT( \
"\n -n Don't update /etc/mtab" \
) \
"\n -r Read-only mount" \
- "\n -t fs-type Filesystem type" \
"\n -w Read-write mount (default)" \
- "\n" \
- "-o option:\n" \
- USE_FEATURE_MOUNT_LOOP( \
- " loop Ignored (loop devices are autodetected)\n" \
+ "\n -t FSTYPE Filesystem type" \
+ "\n -O OPT Mount only filesystems with option OPT (-a only)" \
+ "\n-o OPT:" \
+ IF_FEATURE_MOUNT_LOOP( \
+ "\n loop Ignored (loop devices are autodetected)" \
) \
- USE_FEATURE_MOUNT_FLAGS( \
- " [a]sync Writes are asynchronous / synchronous\n" \
- " [no]atime Disable / enable updates to inode access times\n" \
- " [no]diratime Disable / enable atime updates to directories\n" \
- " [no]dev Allow use of special device files / disallow them\n" \
- " [no]exec Allow use of executable files / disallow them\n" \
- " [no]suid Allow set-user-id-root programs / disallow them\n" \
- " [r]shared Convert [recursively] to a shared subtree\n" \
- " [r]slave Convert [recursively] to a slave subtree\n" \
- " [r]private Convert [recursively] to a private subtree\n" \
- " [un]bindable Make mount point [un]able to be bind mounted\n" \
- " bind Bind a directory to an additional location\n" \
- " move Relocate an existing mount point\n" \
+ IF_FEATURE_MOUNT_FLAGS( \
+ "\n [a]sync Writes are [a]synchronous" \
+ "\n [no]atime Disable/enable updates to inode access times" \
+ "\n [no]diratime Disable/enable atime updates to directories" \
+ "\n [no]relatime Disable/enable atime updates relative to modification time" \
+ "\n [no]dev (Dis)allow use of special device files" \
+ "\n [no]exec (Dis)allow use of executable files" \
+ "\n [no]suid (Dis)allow set-user-id-root programs" \
+ "\n [r]shared Convert [recursively] to a shared subtree" \
+ "\n [r]slave Convert [recursively] to a slave subtree" \
+ "\n [r]private Convert [recursively] to a private subtree" \
+ "\n [un]bindable Make mount point [un]able to be bind mounted" \
+ "\n bind Bind a directory to an additional location" \
+ "\n move Relocate an existing mount point" \
) \
- " remount Remount a mounted filesystem, changing its flags\n" \
- " ro/rw Mount for read-only / read-write\n" \
- "\n" \
- "There are EVEN MORE flags that are specific to each filesystem\n" \
- "You'll have to see the written documentation for those filesystems" \
+ "\n remount Remount a mounted filesystem, changing its flags" \
+ "\n ro/rw Read-only/read-write mount" \
+ "\n" \
+ "\nThere are EVEN MORE flags that are specific to each filesystem" \
+ "\nYou'll have to see the written documentation for those filesystems" \
#define mount_example_usage \
"$ mount\n" \
"Returns 0 for success, number of failed mounts for -a, or errno for one mount."
#define mountpoint_trivial_usage \
- "[-q] <[-d] DIR | -x DEVICE>"
-#define mountpoint_full_usage \
- "mountpoint checks if the directory is a mountpoint\n" \
+ "[-q] <[-dn] DIR | -x DEVICE>"
+#define mountpoint_full_usage "\n\n" \
+ "Check if the directory is a mountpoint\n" \
"\nOptions:" \
"\n -q Quiet" \
"\n -d Print major/minor device number of the filesystem" \
+ "\n -n Print device name of the filesystem" \
"\n -x Print major/minor device number of the blockdevice" \
#define mountpoint_example_usage \
#define mt_trivial_usage \
"[-f device] opcode value"
-#define mt_full_usage \
+#define mt_full_usage "\n\n" \
"Control magnetic tape drive operation\n" \
"\n" \
"Available Opcodes:\n" \
"setpart tell unload unlock weof wset" \
#define mv_trivial_usage \
- "[OPTION]... SOURCE DEST\n" \
- "or: mv [OPTION]... SOURCE... DIRECTORY"
-#define mv_full_usage \
+ "[OPTIONS] SOURCE DEST\n" \
+ "or: mv [OPTIONS] SOURCE... DIRECTORY"
+#define mv_full_usage "\n\n" \
"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -f Don't prompt before overwriting" \
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
-#define nameif_full_usage \
+#define nameif_full_usage "\n\n" \
"Rename network interface while it in the down state\n" \
"\nOptions:" \
"\n -c FILE Use configuration file (default is /etc/mactab)" \
#endif
#define nc_trivial_usage \
- USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \
- "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]")
-#define nc_full_usage \
- "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
+ IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
+ "["IF_NC_EXTRA("-f FILENAME|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]")
+#define nc_full_usage "\n\n" \
+ "Open a pipe to IP:port" IF_NC_EXTRA(" or file") \
NC_OPTIONS_STR \
- USE_NC_EXTRA( \
- "\n -e Exec rest of command line after connect" \
- "\n -i SECS Delay interval for lines sent" \
- "\n -w SECS Timeout for connect" \
+ IF_NC_EXTRA( \
+ "\n -e PROG Run PROG after connect" \
+ "\n -i SEC Delay interval for lines sent" \
+ "\n -w SEC Timeout for connect" \
"\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
) \
- USE_NC_SERVER( \
+ IF_NC_SERVER( \
"\n -l Listen mode, for inbound connects" \
- USE_NC_EXTRA( \
+ IF_NC_EXTRA( \
"\n (use -l twice with -e for persistent server)") \
- "\n -p PORT Local port number" \
+ "\n -p PORT Local port" \
)
#define nc_notes_usage "" \
- USE_NC_EXTRA( \
+ IF_NC_EXTRA( \
"To use netcat as a terminal emulator on a serial port:\n\n" \
"$ stty 115200 -F /dev/ttyS0\n" \
"$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
#else /* DESKTOP nc - much more compatible with nc 1.10 */
#define nc_trivial_usage \
- "[-options] hostname port - connect" \
- USE_NC_SERVER("\n" \
- "nc [-options] -l -p port [hostname] [port] - listen")
-#define nc_full_usage \
+ "[OPTIONS] HOST PORT - connect" \
+ IF_NC_SERVER("\n" \
+ "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen")
+#define nc_full_usage "\n\n" \
"Options:" \
- "\n -e prog [args] Program to exec after connect (must be last)" \
- USE_NC_SERVER( \
+ "\n -e PROG Run PROG after connect (must be last)" \
+ IF_NC_SERVER( \
"\n -l Listen mode, for inbound connects" \
) \
"\n -n Don't do DNS resolution" \
- "\n -s addr Local address" \
- "\n -p port Local port" \
+ "\n -s ADDR Local address" \
+ "\n -p PORT Local port" \
"\n -u UDP mode" \
- "\n -v Verbose (cumulative: -vv)" \
- "\n -w secs Timeout for connects and final net reads" \
- USE_NC_EXTRA( \
- "\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \
- "\n -o file Hex dump of traffic" \
+ "\n -v Verbose" \
+ "\n -w SEC Timeout for connects and final net reads" \
+ IF_NC_EXTRA( \
+ "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
+ "\n -o FILE Hex dump traffic" \
"\n -z Zero-I/O mode (scanning)" \
) \
/* "\n -r Randomize local and remote ports" */
/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
+/* -e PROG can take ARGS too: "nc ... -e ls -l", but we don't document it
+ * in help text: nc 1.10 does not allow that. We don't want to entice
+ * users to use this incompatibility */
+
#endif
#define netstat_trivial_usage \
- "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]"
-#define netstat_full_usage \
+ "[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
+#define netstat_full_usage "\n\n" \
"Display networking information\n" \
"\nOptions:" \
"\n -l Display listening server sockets" \
"\n -w Raw sockets" \
"\n -x Unix sockets" \
"\n -r Display routing table" \
- USE_FEATURE_NETSTAT_WIDE( \
+ IF_FEATURE_NETSTAT_WIDE( \
"\n -W Display with no column truncation" \
+ ) \
+ IF_FEATURE_NETSTAT_PRG( \
+ "\n -p Display PID/Program name for sockets" \
)
#define nice_trivial_usage \
- "[-n ADJUST] [COMMAND [ARG]...]"
-#define nice_full_usage \
- "Run a program with modified scheduling priority\n" \
+ "[-n ADJUST] [PROG [ARGS]]"
+#define nice_full_usage "\n\n" \
+ "Run PROG with modified scheduling priority\n" \
"\nOptions:" \
- "\n -n ADJUST Adjust the scheduling priority by ADJUST" \
+ "\n -n ADJUST Adjust priority by ADJUST" \
#define nmeter_trivial_usage \
"format_string"
-#define nmeter_full_usage \
+#define nmeter_full_usage "\n\n" \
"Monitor system in real time\n\n" \
"Format specifiers:\n" \
"%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
"%[pn] Monitor # of processes\n" \
"%b Monitor block io\n" \
"%Nt Show time (with N decimal points)\n" \
- "%Nd Milliseconds between updates (default=1000)\n" \
+ "%Nd Milliseconds between updates (default:1000)\n" \
"%r Print <cr> instead of <lf> at EOL" \
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
- "COMMAND [ARGS]"
-#define nohup_full_usage \
- "Run a command immune to hangups, with output to a non-tty"
+ "PROG [ARGS]"
+#define nohup_full_usage "\n\n" \
+ "Run PROG immune to hangups, with output to a non-tty"
#define nohup_example_usage \
"$ nohup make &"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
-#define nslookup_full_usage \
+#define nslookup_full_usage "\n\n" \
"Query the nameserver for the IP address of the given HOST\n" \
"optionally using a specified DNS server"
#define nslookup_example_usage \
"Address: 127.0.0.1\n"
#define od_trivial_usage \
- "[-aBbcDdeFfHhIiLlOovXx] " USE_DESKTOP("[-t TYPE] ") "[FILE]"
-#define od_full_usage \
+ "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
+#define od_full_usage "\n\n" \
"Write an unambiguous representation, octal bytes by default, of FILE\n" \
"to standard output. With no FILE or when FILE is -, read standard input."
#define openvt_trivial_usage \
- "VTNUM COMMAND [ARGS...]"
-#define openvt_full_usage \
- "Start a command on a new virtual terminal"
+ "[-c N] [-sw] [PROG [ARGS]]"
+#define openvt_full_usage "\n\n" \
+ "Start PROG on a new virtual terminal\n" \
+ "\nOptions:" \
+ "\n -c N Use specified VT" \
+ "\n -s Switch to the VT" \
+/* "\n -l Run PROG as login shell (by prepending '-')" */ \
+ "\n -w Wait for PROG to exit" \
+
#define openvt_example_usage \
"openvt 2 /bin/ash\n"
+#define parse_trivial_usage \
+ "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
+#define parse_full_usage "\n\n" \
+ "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
+
#define passwd_trivial_usage \
- "[OPTION] [name]"
-#define passwd_full_usage \
- "Change user's password. If no name is specified,\n" \
+ "[OPTIONS] [USER]"
+#define passwd_full_usage "\n\n" \
+ "Change USER's password. If no USER is specified,\n" \
"changes the password for the current user.\n" \
"\nOptions:" \
"\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \
"\n -u Unlock (re-enable) account" \
#define chpasswd_trivial_usage \
- USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]")
-#define chpasswd_full_usage \
- "Read user:password information from stdin\n" \
+ IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
+#define chpasswd_full_usage "\n\n" \
+ "Read user:password information from stdin " \
"and update /etc/passwd accordingly.\n" \
"\nOptions:" \
- USE_GETOPT_LONG( \
- "\n -e,--encrypt Supplied passwords are in encrypted form" \
+ IF_LONG_OPTS( \
+ "\n -e,--encrypted Supplied passwords are in encrypted form" \
"\n -m,--md5 Use MD5 encryption instead of DES" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_LONG_OPTS( \
"\n -e Supplied passwords are in encrypted form" \
"\n -m Use MD5 encryption instead of DES" \
)
#define patch_trivial_usage \
- "[-p NUM] [-i DIFF]"
-#define patch_full_usage \
+ "[-p NUM] [-i DIFF] [-R] [-N]"
+#define patch_full_usage "\n\n" \
" -p NUM Strip NUM leading components from file names" \
"\n -i DIFF Read DIFF instead of stdin" \
+ "\n -R Reverse patch" \
+ "\n -N Ignore already applied patches" \
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
#define pgrep_trivial_usage \
- "[-flnovx] pattern"
-#define pgrep_full_usage \
- "Display process(es) selected by regex pattern\n" \
+ "[-flnovx] [-s SID|-P PPID|PATTERN]"
+#define pgrep_full_usage "\n\n" \
+ "Display process(es) selected by regex PATTERN\n" \
"\nOptions:" \
"\n -l Show command name too" \
"\n -f Match against entire command line" \
"\n -n Show the newest process only" \
"\n -o Show the oldest process only" \
- "\n -v Negate the matching" \
+ "\n -v Negate the match" \
"\n -x Match whole name (not substring)" \
+ "\n -s Match session ID (0 for current)" \
+ "\n -P Match parent process ID" \
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define pidof_trivial_usage \
- "[OPTION] [NAME...]"
+ "[OPTIONS] [NAME...]"
#define USAGE_PIDOF "\n\nOptions:"
#else
#define pidof_trivial_usage \
"[NAME...]"
#define USAGE_PIDOF /* none */
#endif
-#define pidof_full_usage \
+#define pidof_full_usage "\n\n" \
"List PIDs of all processes with names that match NAMEs" \
USAGE_PIDOF \
- USE_FEATURE_PIDOF_SINGLE( \
+ IF_FEATURE_PIDOF_SINGLE( \
"\n -s Show only one PID") \
- USE_FEATURE_PIDOF_OMIT( \
+ IF_FEATURE_PIDOF_OMIT( \
"\n -o PID Omit given pid" \
"\n Use %PPID to omit pid of pidof's parent") \
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
- USE_FEATURE_PIDOF_OMIT( \
+ IF_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh\n20351 5973 5950\n") \
- USE_FEATURE_PIDOF_OMIT( \
+ IF_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh -o %PPID\n20351 5950")
#if !ENABLE_FEATURE_FANCY_PING
#define ping_trivial_usage \
"host"
-#define ping_full_usage \
+#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#define ping6_trivial_usage \
"host"
-#define ping6_full_usage \
+#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
- "[OPTION]... host"
-#define ping_full_usage \
+ "[OPTIONS] HOST"
+#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -4, -6 Force IPv4 or IPv6 hostname resolution" \
"\n -c CNT Send only CNT pings" \
- "\n -s SIZE Send SIZE data bytes in packets (default=56)" \
- "\n -I iface/IP Use interface or IP address as source" \
+ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
+ "\n -I IFACE/IP Use interface or IP address as source" \
+ "\n -W SEC Seconds to wait for the first response (default:10)" \
+ "\n (after all -c CNT packets are sent)" \
+ "\n -w SEC Seconds until ping exits (default:infinite)" \
+ "\n (can exit earlier with -c CNT)" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
#define ping6_trivial_usage \
- "[OPTION]... host"
-#define ping6_full_usage \
+ "[OPTIONS] HOST"
+#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -c CNT Send only CNT pings" \
- "\n -s SIZE Send SIZE data bytes in packets (default=56)" \
- "\n -I iface/IP Use interface or IP address as source" \
+ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
+ "\n -I IFACE/IP Use interface or IP address as source" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+#define pipe_progress_trivial_usage NOUSAGE_STR
+#define pipe_progress_full_usage ""
+
#define pivot_root_trivial_usage \
"NEW_ROOT PUT_OLD"
-#define pivot_root_full_usage \
+#define pivot_root_full_usage "\n\n" \
"Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
"the new root file system"
#define pkill_trivial_usage \
- "[-l] | [-fnovx] [-signal] pattern"
-#define pkill_full_usage \
- "Send a signal to process(es) selected by regex pattern\n" \
+ "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
+#define pkill_full_usage "\n\n" \
+ "Send a signal to process(es) selected by regex PATTERN\n" \
"\nOptions:" \
"\n -l List all signals" \
"\n -f Match against entire command line" \
"\n -n Signal the newest process only" \
"\n -o Signal the oldest process only" \
- "\n -v Negate the matching" \
+ "\n -v Negate the match" \
"\n -x Match whole name (not substring)" \
+ "\n -s Match session ID (0 for current)" \
+ "\n -P Match parent process ID" \
+
+#define popmaildir_trivial_usage \
+ "[OPTIONS] Maildir [connection-helper ...]"
+#define popmaildir_full_usage "\n\n" \
+ "Fetch content of remote mailbox to local maildir\n" \
+ "\nOptions:" \
+ "\n -b Binary mode. Ignored" \
+ "\n -d Debug. Ignored" \
+ "\n -m Show used memory. Ignored" \
+ "\n -V Show version. Ignored" \
+ "\n -c Use tcpclient. Ignored" \
+ "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" \
+ "\n -s Skip authorization" \
+ "\n -T Get messages with TOP instead with RETR" \
+ "\n -k Keep retrieved messages on the server" \
+ "\n -t timeout Set network timeout" \
+ IF_FEATURE_POPMAILDIR_DELIVERY( \
+ "\n -F \"program arg1 arg2 ...\" Filter by program. May be multiple" \
+ "\n -M \"program arg1 arg2 ...\" Deliver by program" \
+ ) \
+ "\n -R size Remove old messages on the server >= size (in bytes). Ignored" \
+ "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" \
+ "\n -L size Do not retrieve new messages >= size (in bytes). Ignored" \
+ "\n -H lines Type specified number of lines of a message. Ignored"
+#define popmaildir_example_usage \
+ "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
+ "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
#define poweroff_trivial_usage \
"[-d delay] [-n] [-f]"
-#define poweroff_full_usage \
+#define poweroff_full_usage "\n\n" \
"Halt and shut off power\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
#define printenv_trivial_usage \
"[VARIABLES...]"
-#define printenv_full_usage \
+#define printenv_full_usage "\n\n" \
"Print all or part of environment.\n" \
"If no environment VARIABLE specified, print them all."
#define printf_trivial_usage \
"FORMAT [ARGUMENT...]"
-#define printf_full_usage \
+#define printf_full_usage "\n\n" \
"Format and print ARGUMENT(s) according to FORMAT,\n" \
"where FORMAT controls the output exactly as in C printf"
#define printf_example_usage \
#define ps_trivial_usage \
""
-#define ps_full_usage \
+#define ps_full_usage "\n\n" \
"Report process status\n" \
"\nOptions:" \
"\n -o col1,col2=header Select columns for display" \
#define ps_trivial_usage \
""
-#define ps_full_usage \
+#define ps_full_usage "\n\n" \
"Report process status\n" \
USAGE_PS \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Show SE Linux context" \
) \
- USE_FEATURE_PS_WIDE( \
+ IF_FEATURE_PS_WIDE( \
"\n w Wide output" \
)
" 742 andersen andersen S [bash]\n" \
" 743 andersen andersen S -bash\n" \
" 745 root root S [getty]\n" \
- " 2990 andersen andersen R ps\n"
+ " 2990 andersen andersen R ps\n" \
#define pscan_trivial_usage \
- "[-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
-#define pscan_full_usage \
+ "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
+#define pscan_full_usage "\n\n" \
"Scan a host, print all open ports\n" \
"\nOptions:" \
+ "\n -c Show closed ports too" \
+ "\n -b Show blocked ports too" \
"\n -p Scan from this port (default 1)" \
"\n -P Scan up to this port (default 1024)" \
"\n -t Timeout (default 5000 ms)" \
#define pwd_trivial_usage \
""
-#define pwd_full_usage \
+#define pwd_full_usage "\n\n" \
"Print the full filename of the current working directory"
#define pwd_example_usage \
"$ pwd\n" \
#define raidautorun_trivial_usage \
"DEVICE"
-#define raidautorun_full_usage \
+#define raidautorun_full_usage "\n\n" \
"Tell the kernel to automatically search and start RAID arrays"
#define raidautorun_example_usage \
"$ raidautorun /dev/md0"
#define rdate_trivial_usage \
"[-sp] HOST"
-#define rdate_full_usage \
+#define rdate_full_usage "\n\n" \
"Get and possibly set the system date and time from a remote HOST\n" \
"\nOptions:" \
"\n -s Set the system date and time (default)" \
"\n -p Print the date and time" \
+#define rdev_trivial_usage \
+ ""
+#define rdev_full_usage "\n\n" \
+ "Print the device node associated with the filesystem mounted at '/'"
+#define rdev_example_usage \
+ "$ rdev\n" \
+ "/dev/mtdblock9 /\n"
+
#define readahead_trivial_usage \
"[FILE]..."
-#define readahead_full_usage \
+#define readahead_full_usage "\n\n" \
"Preload FILE(s) in RAM cache so that subsequent reads for those" \
"files do not block on disk I/O"
#define readlink_trivial_usage \
- USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
-#define readlink_full_usage \
+ IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
+#define readlink_full_usage "\n\n" \
"Display the value of a symlink" \
- USE_FEATURE_READLINK_FOLLOW( "\n" \
+ IF_FEATURE_READLINK_FOLLOW( "\n" \
"\nOptions:" \
- "\n -f Canonicalize by following all symlinks") \
+ "\n -f Canonicalize by following all symlinks" \
+ "\n -n Don't add newline" \
+ "\n -v Verbose" \
+ ) \
#define readprofile_trivial_usage \
- "[OPTIONS]..."
-#define readprofile_full_usage \
+ "[OPTIONS]"
+#define readprofile_full_usage "\n\n" \
"Options:" \
"\n -m mapfile (Default: /boot/System.map)" \
"\n -p profile (Default: /proc/profile)" \
#define realpath_trivial_usage \
"pathname..."
-#define realpath_full_usage \
+#define realpath_full_usage "\n\n" \
"Return the absolute pathnames of given argument"
#define reboot_trivial_usage \
"[-d delay] [-n] [-f]"
-#define reboot_full_usage \
+#define reboot_full_usage "\n\n" \
"Reboot the system\n" \
"\nOptions:" \
"\n -d Delay interval for rebooting" \
"\n -n No call to sync()" \
"\n -f Force reboot (don't go through init)" \
+#define reformime_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define reformime_full_usage "\n\n" \
+ "Parse MIME-encoded message\n" \
+ "\nOptions:" \
+ "\n -x prefix Extract content of MIME sections to files" \
+ "\n -X prog [args] Filter content of MIME sections through prog." \
+ "\n Must be the last option" \
+ "\n" \
+ "\nOther options are silently ignored." \
+
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
-#define renice_full_usage \
+#define renice_full_usage "\n\n" \
"Change priority of running processes\n" \
"\nOptions:" \
"\n -n Adjust current nice value (smaller is faster)" \
"\n -g Process group id(s)" \
"\n -u Process user name(s) and/or id(s)" \
+#define scriptreplay_trivial_usage \
+ "timingfile [typescript [divisor]]"
+#define scriptreplay_full_usage "\n\n" \
+ "Play back typescripts, using timing information"
+
#define reset_trivial_usage \
""
-#define reset_full_usage \
+#define reset_full_usage "\n\n" \
"Reset the screen"
#define resize_trivial_usage \
""
-#define resize_full_usage \
+#define resize_full_usage "\n\n" \
"Resize the screen"
#define restorecon_trivial_usage \
"[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
-#define restorecon_full_usage \
+#define restorecon_full_usage "\n\n" \
"Reset security contexts of files in pathname\n" \
"\n -i Ignore files that do not exist" \
"\n -f file File with list of files to process. Use - for stdin" \
"\n if it has changed" \
#define rm_trivial_usage \
- "[OPTION]... FILE..."
-#define rm_full_usage \
+ "[OPTIONS] FILE..."
+#define rm_full_usage "\n\n" \
"Remove (unlink) the FILE(s). Use '--' to\n" \
"indicate that all following arguments are non-options.\n" \
"\nOptions:" \
"$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
- "[OPTION]... DIRECTORY..."
-#define rmdir_full_usage \
- "Remove the DIRECTORY, if it is empty"
+ "[OPTIONS] DIRECTORY..."
+#define rmdir_full_usage "\n\n" \
+ "Remove the DIRECTORY, if it is empty.\n" \
+ "\nOptions:" \
+ IF_FEATURE_RMDIR_LONG_OPTIONS( \
+ "\n -p|--parents Include parents" \
+ "\n -ignore-fail-on-non-empty" \
+ ) \
+ IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
+ "\n -p Include parents" \
+ )
+
#define rmdir_example_usage \
"# rmdir /tmp/foo\n"
#define rmmod_trivial_usage \
- "[OPTION]... [MODULE]..."
-#define rmmod_full_usage \
+ "[OPTIONS] [MODULE]..."
+#define rmmod_full_usage "\n\n" \
"Unload the specified kernel modules from the kernel\n" \
"\nOptions:" \
+ "\n -w Wait until the module is no longer used" \
+ "\n -f Force unloading" \
"\n -a Remove all unused modules (recursively)" \
#define rmmod_example_usage \
#define route_trivial_usage \
"[{add|del|delete}]"
-#define route_full_usage \
- "Edit the kernel's routing tables\n" \
+#define route_full_usage "\n\n" \
+ "Edit kernel routing tables\n" \
"\nOptions:" \
- "\n -n Dont resolve names" \
+ "\n -n Don't resolve names" \
"\n -e Display other/more information" \
- "\n -A inet" USE_FEATURE_IPV6("{6}") " Select address family" \
+ "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
#define rpm_trivial_usage \
"-i -q[ildc]p package.rpm"
-#define rpm_full_usage \
+#define rpm_full_usage "\n\n" \
"Manipulate RPM packages\n" \
"\nOptions:" \
"\n -i Install package" \
#define rpm2cpio_trivial_usage \
"package.rpm"
-#define rpm2cpio_full_usage \
+#define rpm2cpio_full_usage "\n\n" \
"Output a cpio archive of the rpm file"
#define rtcwake_trivial_usage \
- "[-a | -l | -u] [-d DEV] [-m MODE] [-s SECS | -t TIME]"
-#define rtcwake_full_usage \
+ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
+#define rtcwake_full_usage "\n\n" \
"Enter a system sleep state until specified wakeup time\n" \
- USE_GETOPT_LONG( \
- "\n -a,--auto Read clock mode from adjtime" \
- "\n -l,--local Clock is set to local time" \
- "\n -u,--utc Clock is set to UTC time" \
- "\n -d,--device=DEV Specify the RTC device" \
- "\n -m,--mode=MODE Set the sleep state (default: standby)" \
+ IF_LONG_OPTS( \
+ "\n -a,--auto Read clock mode from adjtime" \
+ "\n -l,--local Clock is set to local time" \
+ "\n -u,--utc Clock is set to UTC time" \
+ "\n -d,--device=DEV Specify the RTC device" \
+ "\n -m,--mode=MODE Set the sleep state (default: standby)" \
"\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
- "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
+ "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_LONG_OPTS( \
"\n -a Read clock mode from adjtime" \
"\n -l Clock is set to local time" \
"\n -u Clock is set to UTC time" \
)
#define runcon_trivial_usage \
- "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
- " runcon CONTEXT COMMAND [args]"
-#define runcon_full_usage \
- "Run a program in a different security context\n" \
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG [ARGS]\n" \
+ " runcon CONTEXT PROG [ARGS]"
+#define runcon_full_usage "\n\n" \
+ "Run PROG in a different security context\n" \
"\n CONTEXT Complete security context\n" \
- USE_GETOPT_LONG( \
+ IF_FEATURE_RUNCON_LONG_OPTIONS( \
"\n -c,--compute Compute process transition context before modifying" \
"\n -t,--type=TYPE Type (for same role as parent)" \
"\n -u,--user=USER User identity" \
"\n -r,--role=ROLE Role" \
"\n -l,--range=RNG Levelrange" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
"\n -c Compute process transition context before modifying" \
"\n -t TYPE Type (for same role as parent)" \
"\n -u USER User identity" \
)
#define run_parts_trivial_usage \
- "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
-#define run_parts_full_usage \
+ "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
+#define run_parts_full_usage "\n\n" \
"Run a bunch of scripts in a directory\n" \
"\nOptions:" \
"\n -t Print what would be run, but don't actually run anything" \
"\n -a ARG Pass ARG as argument for every program" \
"\n -u MASK Set the umask to MASK before running every program" \
- USE_FEATURE_RUN_PARTS_FANCY( \
+ IF_FEATURE_RUN_PARTS_FANCY( \
"\n -l Print names of all matching files even if they are not executable" \
)
#define runlevel_trivial_usage \
"[utmp]"
-#define runlevel_full_usage \
+#define runlevel_full_usage "\n\n" \
"Find the current and previous system runlevel.\n\n" \
"If no utmp file exists or if no runlevel record can be found,\n" \
"print \"unknown\""
#define runsv_trivial_usage \
"dir"
-#define runsv_full_usage \
+#define runsv_full_usage "\n\n" \
"Start and monitor a service and optionally an appendant log service"
#define runsvdir_trivial_usage \
- "[-P] dir"
-#define runsvdir_full_usage \
- "Start a runsv process for each subdirectory"
+ "[-P] [-s SCRIPT] dir"
+#define runsvdir_full_usage "\n\n" \
+ "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
+ "\n -P Put each runsv in a new session" \
+ "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
#define rx_trivial_usage \
"FILE"
-#define rx_full_usage \
+#define rx_full_usage "\n\n" \
"Receive a file using the xmodem protocol"
#define rx_example_usage \
"$ rx /tmp/foo\n"
#define script_trivial_usage \
- "[-afq] [-c COMMAND] [OUTFILE]"
-#define script_full_usage \
+ "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
+#define script_full_usage "\n\n" \
"Options:" \
"\n -a Append output" \
- "\n -c Run COMMAND, not shell" \
+ "\n -c Run PROG, not shell" \
"\n -f Flush output after each write" \
"\n -q Quiet" \
+ IF_SCRIPTREPLAY( \
+ "\n -t Send timing to stderr" \
+ )
#define sed_trivial_usage \
- "[-efinr] pattern [files...]"
-#define sed_full_usage \
+ "[-efinr] SED_CMD [FILE]..."
+#define sed_full_usage "\n\n" \
"Options:" \
- "\n -e script Add the script to the commands to be executed" \
- "\n -f scriptfile Add scriptfile contents to the" \
- "\n commands to be executed" \
- "\n -i Edit files in-place" \
- "\n -n Suppress automatic printing of pattern space" \
- "\n -r Use extended regular expression syntax" \
+ "\n -e CMD Add CMD to sed commands to be executed" \
+ "\n -f FILE Add FILE contents to sed commands to be executed" \
+ "\n -i Edit files in-place" \
+ "\n -n Suppress automatic printing of pattern space" \
+ "\n -r Use extended regex syntax" \
"\n" \
"\nIf no -e or -f is given, the first non-option argument is taken as the sed" \
- "\nscript to interpret. All remaining arguments are names of input files; if no" \
+ "\ncommand to interpret. All remaining arguments are names of input files; if no" \
"\ninput files are specified, then the standard input is read. Source files" \
"\nwill not be modified unless -i option is given." \
"$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
-#define selinuxenabled_trivial_usage
-#define selinuxenabled_full_usage
+#define selinuxenabled_trivial_usage NOUSAGE_STR
+#define selinuxenabled_full_usage ""
#define sendmail_trivial_usage \
- "[-w timeout] [-U user] [-P password] [-X]\n" \
- "-t to [-t to]... [-n] [-s subject] [-c charset] server[:port] from [body] [attachment ...]"
-#define sendmail_full_usage \
- "Send an email.\n" \
- "\nOptions:" \
- "\n -w timeout Set timeout on network operations" \
- "\n -U username Authenticate with specified username/password" \
- "\n -P password" \
- "\n -t address Recipient(s). May be repeated" \
- "\n -X Use openssl connection helper for secured servers" \
- "\n -n Request delivery notification to sender" \
- "\n -s subject Subject" \
- "\n -c charset Assumed charset for body and subject [utf-8]" \
+ "[OPTIONS] [RECIPIENT_EMAIL]..."
+#define sendmail_full_usage "\n\n" \
+ "Read email from stdin and send it\n" \
+ "\nStandard options:" \
+ "\n -t Read additional recipients from message body" \
+ "\n -f sender Sender (required)" \
+ "\n -o options Various options. -oi implied, others are ignored" \
+ "\n" \
+ "\nBusybox specific options:" \
+ "\n -w seconds Network timeout" \
+ "\n -H 'PROG ARGS' Run connection helper" \
+ "\n Examples:" \
+ "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
+ "\n -connect smtp.gmail.com:25' <email.txt" \
+ "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
+ "\n -H 'exec openssl s_client -quiet -tls1" \
+ "\n -connect smtp.gmail.com:465' <email.txt" \
+ "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
+ "\n -S server[:port] Server" \
+ "\n -au<username> Username for AUTH LOGIN" \
+ "\n -ap<password> Password for AUTH LOGIN" \
+ "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
+ "\n" \
+ "\nOther options are silently ignored; -oi -t is implied" \
+ IF_MAKEMIME( \
+ "\nUse makemime applet to create message with attachments" \
+ )
#define seq_trivial_usage \
- "[first [increment]] last"
-#define seq_full_usage \
- "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
- "FIRST, INCREMENT default to 1" \
- "\n\nArguments:\n" \
- " LAST\n" \
- " FIRST LAST\n" \
- " FIRST INCREMENT LAST"
+ "[-w] [-s SEP] [FIRST [INC]] LAST"
+#define seq_full_usage "\n\n" \
+ "Print numbers from FIRST to LAST, in steps of INC.\n" \
+ "FIRST, INC default to 1\n" \
+ "\nOptions:" \
+ "\n -w Pad to last with leading zeros" \
+ "\n -s SEP String separator" \
#define sestatus_trivial_usage \
"[-vb]"
-#define sestatus_full_usage \
+#define sestatus_full_usage "\n\n" \
" -v Verbose" \
"\n -b Display current state of booleans" \
#define setconsole_trivial_usage \
- "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
-#define setconsole_full_usage \
+ "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
+#define setconsole_full_usage "\n\n" \
"Redirect system console output to DEVICE (default: /dev/tty)\n" \
"\nOptions:" \
"\n -r Reset output to /dev/console" \
#define setenforce_trivial_usage \
"[Enforcing | Permissive | 1 | 0]"
-#define setenforce_full_usage
+#define setenforce_full_usage ""
#define setfiles_trivial_usage \
"[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \
- USE_FEATURE_SETFILES_CHECK_OPTION( \
+ IF_FEATURE_SETFILES_CHECK_OPTION( \
" [-c policyfile] spec_file" \
) \
" pathname"
-#define setfiles_full_usage \
+#define setfiles_full_usage "\n\n" \
"Reset file contexts under pathname according to spec_file\n" \
- USE_FEATURE_SETFILES_CHECK_OPTION( \
+ IF_FEATURE_SETFILES_CHECK_OPTION( \
"\n -c file Check the validity of the contexts against the specified binary policy" \
) \
"\n -d Show which specification matched each file" \
"\n -vv Show changes in file labels, if type, role, or user are changing" \
"\n -W Display warnings about entries that had no matching files" \
+#define setfont_trivial_usage \
+ "FONT [-m MAPFILE] [-C TTY]"
+#define setfont_full_usage "\n\n" \
+ "Load a console font\n" \
+ "\nOptions:" \
+ "\n -m MAPFILE Load console screen map" \
+ "\n -C TTY Affect TTY instead of /dev/tty" \
+
+#define setfont_example_usage \
+ "$ setfont -m koi8-r /etc/i18n/fontname\n"
+
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE..."
-#define setkeycodes_full_usage \
+#define setkeycodes_full_usage "\n\n" \
"Set entries into the kernel's scancode-to-keycode map,\n" \
"allowing unusual keyboards to generate usable keycodes.\n\n" \
"SCANCODE may be either xx or e0xx (hexadecimal),\n" \
#define setlogcons_trivial_usage \
"N"
-#define setlogcons_full_usage \
+#define setlogcons_full_usage "\n\n" \
"Redirect the kernel output to console N (0 for current)"
#define setsebool_trivial_usage \
"boolean value"
-#define setsebool_full_usage \
+#define setsebool_full_usage "\n\n" \
"Change boolean setting"
#define setsid_trivial_usage \
"PROG [ARG...]"
-#define setsid_full_usage \
+#define setsid_full_usage "\n\n" \
"Run PROG in a new session. PROG will have no controlling terminal\n" \
"and will not be affected by keyboard signals (Ctrl-C etc).\n" \
"See setsid(2) for details." \
-#define lash_trivial_usage \
- "[FILE]...\n" \
- "or: sh -c command [args]..."
-#define lash_full_usage \
- "lash is deprecated, please use hush"
-
#define last_trivial_usage \
- ""
-#define last_full_usage \
- "Show listing of the last users that logged into the system"
+ ""IF_FEATURE_LAST_FANCY("[-HW] [-f file]")
+#define last_full_usage "\n\n" \
+ "Show listing of the last users that logged into the system" \
+ IF_FEATURE_LAST_FANCY( "\n" \
+ "\nOptions:" \
+/* "\n -H Show header line" */ \
+ "\n -W Display with no host column truncation" \
+ "\n -f file Read from file instead of /var/log/wtmp" \
+ )
-#define sha1sum_trivial_usage \
- "[OPTION] [FILEs...]" \
- USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
-#define sha1sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \
- USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+#define showkey_trivial_usage \
+ "[-a | -k | -s]"
+#define showkey_full_usage "\n\n" \
+ "Show keys pressed\n" \
"\nOptions:" \
- "\n -c Check SHA1 sums against given list" \
- "\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted SHA1 checksum lines" \
- )
+ "\n -a Display decimal/octal/hex values of the keys" \
+ "\n -k Display interpreted keycodes (default)" \
+ "\n -s Display raw scan-codes" \
#define slattach_trivial_usage \
- "[-cehmLF] [-s speed] [-p protocol] DEVICEs"
-#define slattach_full_usage \
+ "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
+#define slattach_full_usage "\n\n" \
"Attach network interface(s) to serial line(s)\n" \
"\nOptions:" \
- "\n -p Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
- "\n -s Set line speed" \
+ "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
+ "\n -s SPD Set line speed" \
"\n -e Exit after initializing device" \
"\n -h Exit when the carrier is lost" \
- "\n -c Execute a command when the line is hung up" \
+ "\n -c PROG Run PROG when the line is hung up" \
"\n -m Do NOT initialize the line in raw 8 bits mode" \
"\n -L Enable 3-wire operation" \
"\n -F Disable RTS/CTS flow control" \
#define sleep_trivial_usage \
- USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
-#define sleep_full_usage \
- SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \
- USE_FEATURE_FANCY_SLEEP( \
+ IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
+#define sleep_full_usage "\n\n" \
+ IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
+ IF_FEATURE_FANCY_SLEEP( \
"Pause for a time equal to the total of the args given, where each arg can\n" \
"have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
- USE_FEATURE_FANCY_SLEEP( \
+ IF_FEATURE_FANCY_SLEEP( \
"$ sleep 1d 3h 22m 8s\n" \
"[98528 second delay results]\n")
#define sort_trivial_usage \
"[-nru" \
- USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
+ IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
"] [FILE]..."
-#define sort_full_usage \
+#define sort_full_usage "\n\n" \
"Sort lines of text\n" \
"\nOptions:" \
- USE_FEATURE_SORT_BIG( \
+ IF_FEATURE_SORT_BIG( \
"\n -b Ignore leading blanks" \
"\n -c Check whether input is sorted" \
"\n -d Dictionary order (blank or alphanumeric only)" \
"\n -M Sort month" \
) \
"\n -n Sort numbers" \
- USE_FEATURE_SORT_BIG( \
+ IF_FEATURE_SORT_BIG( \
"\n -o Output to file" \
"\n -k Sort by key" \
"\n -t CHAR Key separator" \
) \
"\n -r Reverse sort order" \
- USE_FEATURE_SORT_BIG( \
+ IF_FEATURE_SORT_BIG( \
"\n -s Stable (don't sort ties alphabetically)" \
) \
"\n -u Suppress duplicate lines" \
- USE_FEATURE_SORT_BIG( \
+ IF_FEATURE_SORT_BIG( \
"\n -z Lines are terminated by NUL, not newline" \
"\n -mST Ignored for GNU compatibility") \
"d\n" \
"e\n" \
"f\n" \
- USE_FEATURE_SORT_BIG( \
+ IF_FEATURE_SORT_BIG( \
"$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
"d 2\n" \
"b 2\n" \
""
#define split_trivial_usage \
- "[OPTION] [INPUT [PREFIX]]"
-#define split_full_usage \
+ "[OPTIONS] [INPUT [PREFIX]]"
+#define split_full_usage "\n\n" \
"Options:" \
"\n -b n[k|m] Split by bytes" \
"\n -l n Split by lines" \
"$ cat TODO | split -a 2 -l 2 TODO_\n"
#define start_stop_daemon_trivial_usage \
- "[OPTIONS] [" \
- USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \
- "] ... [-- arguments...]"
-#define start_stop_daemon_full_usage \
- "Start and stop services\n" \
- "\nOptions:" \
- USE_GETOPT_LONG( \
- "\n -S,--start Start" \
- "\n -K,--stop Stop" \
- "\n -a,--startas pathname Start process specified by pathname" \
- "\n -b,--background Put process into background" \
- "\n -u,--user username|uid Stop this user's processes" \
- "\n -x,--exec executable Program to either start or check" \
- "\n -n,--name process-name Stop processes with this name" \
- "\n -p,--pidfile pid-file Save or load pid using a pid-file" \
- "\n -m,--make-pidfile Create the -p file and enter pid in it" \
- "\n -q,--quiet Quiet" \
- USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o,--oknodo Exit status 0 if nothing done" \
+ "[OPTIONS] [-S|-K] ... [-- arguments...]"
+#define start_stop_daemon_full_usage "\n\n" \
+ "Search for matching processes, and then\n" \
+ "-K: stop all matching processes.\n" \
+ "-S: start a process unless a matching process is found.\n" \
+ IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
+ "\nProcess matching:" \
+ "\n -u,--user USERNAME|UID Match only this user's processes" \
+ "\n -n,--name NAME Match processes with NAME" \
+ "\n in comm field in /proc/PID/stat" \
+ "\n -x,--exec EXECUTABLE Match processes with this command" \
+ "\n in /proc/PID/cmdline" \
+ "\n -p,--pidfile FILE Match a process with PID from the file" \
+ "\n All specified conditions must match" \
+ "\n-S only:" \
+ "\n -x,--exec EXECUTABLE Program to run" \
+ "\n -a,--startas NAME Zeroth argument" \
+ "\n -b,--background Background" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -N,--nicelevel N Change nice level" \
+ ) \
+ "\n -c,--chuid USER[:[GRP]] Change to user/group" \
+ "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
+ "\n-K only:" \
+ "\n -s,--signal SIG Signal to send" \
+ "\n -t,--test Match only, exit with 0 if a process is found" \
+ "\nOther:" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o,--oknodo Exit with status 0 if nothing is done" \
"\n -v,--verbose Verbose" \
- "\n -N,--nicelevel N Add N to process's nice level" \
) \
- "\n -s,--signal signal Signal to send (default TERM)" \
- "\n -c,--chuid user[:[grp]] Change to specified user/group" \
+ "\n -q,--quiet Quiet" \
) \
- SKIP_GETOPT_LONG( \
- "\n -S Start" \
- "\n -K Stop" \
- "\n -a pathname Start process specified by pathname" \
- "\n -b Put process into background" \
- "\n -u username|uid Stop this user's processes" \
- "\n -x executable Program to either start or check" \
- "\n -n process-name Stop processes with this name" \
- "\n -p pid-file Save or load pid using a pid-file" \
- "\n -m Create the -p file and enter pid in it" \
- "\n -q Quiet" \
- USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o Exit status 0 if nothing done" \
+ IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
+ "\nProcess matching:" \
+ "\n -u USERNAME|UID Match only this user's processes" \
+ "\n -n NAME Match processes with NAME" \
+ "\n in comm field in /proc/PID/stat" \
+ "\n -x EXECUTABLE Match processes with this command" \
+ "\n command in /proc/PID/cmdline" \
+ "\n -p FILE Match a process with PID from the file" \
+ "\n All specified conditions must match" \
+ "\n-S only:" \
+ "\n -x EXECUTABLE Program to run" \
+ "\n -a NAME Zeroth argument" \
+ "\n -b Background" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -N N Change nice level" \
+ ) \
+ "\n -c USER[:[GRP]] Change to user/group" \
+ "\n -m Write PID to the pidfile specified by -p" \
+ "\n-K only:" \
+ "\n -s SIG Signal to send" \
+ "\n -t Match only, exit with 0 if a process is found" \
+ "\nOther:" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o Exit with status 0 if nothing is done" \
"\n -v Verbose" \
- "\n -N N Add N to process's nice level" \
) \
- "\n -s signal Signal to send (default TERM)" \
- "\n -c user[:[grp]] Change to specified user/group" \
- )
+ "\n -q Quiet" \
+ ) \
#define stat_trivial_usage \
- "[OPTION] FILE..."
-#define stat_full_usage \
+ "[OPTIONS] FILE..."
+#define stat_full_usage "\n\n" \
"Display file (default) or filesystem status\n" \
"\nOptions:" \
- USE_FEATURE_STAT_FORMAT( \
+ IF_FEATURE_STAT_FORMAT( \
"\n -c fmt Use the specified format" \
) \
"\n -f Display filesystem status" \
"\n -L Dereference links" \
"\n -t Display info in terse form" \
- USE_SELINUX( \
+ IF_SELINUX( \
"\n -Z Print security context" \
) \
- USE_FEATURE_STAT_FORMAT( \
+ IF_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
" %A Access rights in human readable form\n" \
" %c Total file nodes in file system\n" \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
- USE_SELINUX( \
+ IF_SELINUX( \
" %C Security context in SELinux\n" \
) \
" %i File System ID in hex\n" \
" %S Fundamental block size (for block counts)\n" \
" %t Type in hex\n" \
" %T Type in human readable form" \
- )
+ ) \
#define strings_trivial_usage \
- "[-afo] [-n length] [file...]"
-#define strings_full_usage \
+ "[-afo] [-n LEN] [FILE]..."
+#define strings_full_usage "\n\n" \
"Display printable strings in a binary file\n" \
"\nOptions:" \
"\n -a Scan whole file (default)" \
"\n -f Precede strings with filenames" \
- "\n -n N At least N characters form a string (default 4)" \
+ "\n -n LEN At least LEN characters form a string (default 4)" \
"\n -o Precede strings with decimal offsets" \
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
-#define stty_full_usage \
+#define stty_full_usage "\n\n" \
"Without arguments, prints baud rate, line discipline,\n" \
"and deviations from stty sane\n" \
"\nOptions:" \
"\n [SETTING] See manpage" \
#define su_trivial_usage \
- "[OPTION]... [-] [username]"
-#define su_full_usage \
+ "[OPTIONS] [-] [username]"
+#define su_full_usage "\n\n" \
"Change user id or become root\n" \
"\nOptions:" \
"\n -p, -m Preserve environment" \
- "\n -c Command to pass to 'sh -c'" \
- "\n -s Shell to use instead of default shell" \
+ "\n -c CMD Command to pass to 'sh -c'" \
+ "\n -s SH Shell to use instead of default shell" \
#define sulogin_trivial_usage \
- "[OPTION]... [tty-device]"
-#define sulogin_full_usage \
+ "[OPTIONS] [TTY]"
+#define sulogin_full_usage "\n\n" \
"Single user login\n" \
"\nOptions:" \
- "\n -t Timeout" \
+ "\n -t N Timeout" \
#define sum_trivial_usage \
- "[rs] [files...]"
-#define sum_full_usage \
+ "[-rs] [FILE]..."
+#define sum_full_usage "\n\n" \
"Checksum and count the blocks in a file\n" \
"\nOptions:" \
"\n -r Use BSD sum algorithm (1K blocks)" \
#define sv_trivial_usage \
"[-v] [-w sec] command service..."
-#define sv_full_usage \
+#define sv_full_usage "\n\n" \
"Control services monitored by runsv supervisor.\n" \
"Commands (only first character is enough):\n" \
"\n" \
"up: if service isn't running, start it. If service stops, restart it\n" \
"once: like 'up', but if service stops, don't restart it\n" \
"down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
- " if it exists. After it stops, do not restart service\n" \
+ " if it exists. After it stops, do not restart service\n" \
"exit: send TERM and CONT signals to service and log service. If they exit,\n" \
- " runsv exits too\n" \
+ " runsv exits too\n" \
"pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
"STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
#define svlogd_trivial_usage \
"[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
-#define svlogd_full_usage \
+#define svlogd_full_usage "\n\n" \
"Continuously read log data from standard input, optionally " \
"filter log messages, and write the data to one or more automatically " \
"rotated logs" \
#define swapoff_trivial_usage \
"[-a] [DEVICE]"
-#define swapoff_full_usage \
+#define swapoff_full_usage "\n\n" \
"Stop swapping on DEVICE\n" \
"\nOptions:" \
"\n -a Stop swapping on all swap devices" \
#define swapon_trivial_usage \
- "[-a] [DEVICE]"
-#define swapon_full_usage \
+ "[-a]" IF_FEATURE_SWAPON_PRI(" [-p pri]") " [DEVICE]"
+#define swapon_full_usage "\n\n" \
"Start swapping on DEVICE\n" \
"\nOptions:" \
"\n -a Start swapping on all swap devices" \
+ IF_FEATURE_SWAPON_PRI( \
+ "\n -p pri Set swap device priority" \
+ ) \
#define switch_root_trivial_usage \
- "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
-#define switch_root_full_usage \
- "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
- "and exec NEW_INIT\n" \
+ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
+#define switch_root_full_usage "\n\n" \
+ "Free initramfs and switch to another root fs:\n" \
+ "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
+ "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
"\nOptions:" \
- "\n -c Redirect console to device on new root" \
+ "\n -c DEV Reopen stdio to DEV after switch" \
#define sync_trivial_usage \
""
-#define sync_full_usage \
- "Write all buffered filesystem blocks to disk"
+#define sync_full_usage "\n\n" \
+ "Write all buffered blocks to disk"
+
+#define fsync_trivial_usage \
+ "[OPTIONS] FILE..."
+#define fsync_full_usage \
+ "Write files' buffered blocks to disk\n" \
+ "\nOptions:" \
+ "\n -d Avoid syncing metadata"
#define sysctl_trivial_usage \
- "[OPTIONS]... [VALUE]..."
-#define sysctl_full_usage \
+ "[OPTIONS] [VALUE]..."
+#define sysctl_full_usage "\n\n" \
"Configure kernel parameters at runtime\n" \
"\nOptions:" \
- "\n -n Disable printing of key names" \
+ "\n -n Don't print key names" \
"\n -e Don't warn about unknown keys" \
"\n -w Change sysctl setting" \
"\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
"sysctl [-n] [-e] -A\n"
#define syslogd_trivial_usage \
- "[OPTION]..."
-#define syslogd_full_usage \
+ "[OPTIONS]"
+#define syslogd_full_usage "\n\n" \
"System logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf.\n" \
"\nOptions:" \
"\n -n Run in foreground" \
- "\n -O FILE Log to given file (default=/var/log/messages)" \
+ "\n -O FILE Log to given file (default:/var/log/messages)" \
"\n -l n Set local log level" \
"\n -S Smaller logging output" \
- USE_FEATURE_ROTATE_LOGFILE( \
- "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
- "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
- USE_FEATURE_REMOTE_LOG( \
+ IF_FEATURE_ROTATE_LOGFILE( \
+ "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
+ "\n -b NUM Number of rotated logs to keep (default:1, max=99, 0=purge)") \
+ IF_FEATURE_REMOTE_LOG( \
"\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
"\n -L Log locally and via network (default is network only if -R)") \
- USE_FEATURE_SYSLOGD_DUP( \
+ IF_FEATURE_SYSLOGD_DUP( \
"\n -D Drop duplicates") \
- USE_FEATURE_IPC_SYSLOG( \
+ IF_FEATURE_IPC_SYSLOG( \
"\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
/* NB: -Csize shouldn't have space (because size is optional) */
-/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
+/* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
#define tac_trivial_usage \
"[FILE]..."
-#define tac_full_usage \
+#define tac_full_usage "\n\n" \
"Concatenate FILE(s) and print them in reverse"
#define tail_trivial_usage \
- "[OPTION]... [FILE]..."
-#define tail_full_usage \
+ "[OPTIONS] [FILE]..."
+#define tail_full_usage "\n\n" \
"Print last 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
"file name. With no FILE, or when FILE is -, read standard input.\n" \
"\nOptions:" \
- USE_FEATURE_FANCY_TAIL( \
+ IF_FEATURE_FANCY_TAIL( \
"\n -c N[kbm] Output the last N bytes") \
"\n -n N[kbm] Print last N lines instead of last 10" \
"\n -f Output data as the file grows" \
- USE_FEATURE_FANCY_TAIL( \
+ IF_FEATURE_FANCY_TAIL( \
"\n -q Never output headers giving file names" \
"\n -s SEC Wait SEC seconds between reads with -f" \
"\n -v Always output headers giving file names" \
- "\n\n" \
- "If the first character of N (bytes or lines) is a '+', output begins with\n" \
- "the Nth item from the start of each file, otherwise, print the last N items\n" \
- "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
+ "\n" \
+ "\nIf the first character of N (bytes or lines) is a '+', output begins with" \
+ "\nthe Nth item from the start of each file, otherwise, print the last N items" \
+ "\nin the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
#define tail_example_usage \
"$ tail -n 1 /etc/resolv.conf\n" \
"nameserver 10.0.0.1\n"
#define tar_trivial_usage \
- "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
- USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
- USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
- USE_FEATURE_TAR_FROM("[-X FILE] ") \
+ "-[" IF_FEATURE_TAR_CREATE("c") IF_FEATURE_SEAMLESS_GZ("z") \
+ IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
+ IF_FEATURE_SEAMLESS_Z("Z") "xtvO] " \
+ IF_FEATURE_TAR_FROM("[-X FILE] ") \
"[-f TARFILE] [-C DIR] [FILE(s)]..."
-#define tar_full_usage \
+#define tar_full_usage "\n\n" \
"Create, extract, or list files from a tar file\n" \
"\nOptions:" \
- USE_FEATURE_TAR_CREATE( \
+ IF_FEATURE_TAR_CREATE( \
"\n c Create") \
"\n x Extract" \
"\n t List" \
"\nArchive format selection:" \
- USE_FEATURE_TAR_GZIP( \
+ IF_FEATURE_SEAMLESS_GZ( \
"\n z Filter the archive through gzip" \
) \
- USE_FEATURE_TAR_BZIP2( \
+ IF_FEATURE_SEAMLESS_BZ2( \
"\n j Filter the archive through bzip2" \
) \
- USE_FEATURE_TAR_LZMA( \
+ IF_FEATURE_SEAMLESS_LZMA( \
"\n a Filter the archive through lzma" \
) \
- USE_FEATURE_TAR_COMPRESS( \
+ IF_FEATURE_SEAMLESS_Z( \
"\n Z Filter the archive through compress" \
) \
"\nFile selection:" \
"\n f Name of TARFILE or \"-\" for stdin" \
"\n O Extract to stdout" \
- USE_FEATURE_TAR_FROM( \
+ IF_FEATURE_TAR_FROM( \
"\n exclude File to exclude" \
"\n X File with names to exclude" \
) \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_trivial_usage \
- "[-p] [mask] [pid | command [arg]...]"
-#define taskset_full_usage \
+ "[-p] [MASK] [PID | PROG [ARGS]]"
+#define taskset_full_usage "\n\n" \
"Set or get CPU affinity\n" \
"\nOptions:" \
"\n -p Operate on an existing PID" \
"pid 1's current affinity mask: 3\n"
#define tee_trivial_usage \
- "[OPTION]... [FILE]..."
-#define tee_full_usage \
+ "[OPTIONS] [FILE]..."
+#define tee_full_usage "\n\n" \
"Copy standard input to each FILE, and also to standard output\n" \
"\nOptions:" \
"\n -a Append to the given FILEs, do not overwrite" \
#if ENABLE_FEATURE_TELNET_AUTOLOGIN
#define telnet_trivial_usage \
"[-a] [-l USER] HOST [PORT]"
-#define telnet_full_usage \
+#define telnet_full_usage "\n\n" \
"Connect to telnet server\n" \
"\nOptions:" \
- "\n -a Attempt an automatic login with USER variable" \
- "\n -l USER Attempt an automatic login with USER argument" \
+ "\n -a Automatic login with $USER variable" \
+ "\n -l USER Automatic login as USER" \
#else
#define telnet_trivial_usage \
"HOST [PORT]"
-#define telnet_full_usage \
+#define telnet_full_usage "\n\n" \
"Connect to telnet server"
#endif
#define telnetd_trivial_usage \
- "[OPTION]"
-#define telnetd_full_usage \
+ "[OPTIONS]"
+#define telnetd_full_usage "\n\n" \
"Handle incoming telnet connections" \
- SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
+ IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
"\nOptions:" \
"\n -l LOGIN Exec LOGIN on connect" \
"\n -f issue_file Display issue_file instead of /etc/issue" \
"\n -K Close connection as soon as login exits" \
"\n (normally wait until all programs close slave pty)" \
- USE_FEATURE_TELNETD_STANDALONE( \
+ IF_FEATURE_TELNETD_STANDALONE( \
"\n -p PORT Port to listen on" \
"\n -b ADDR Address to bind to" \
"\n -F Run in foreground" \
"\n -i Run as inetd subservice" \
)
+/* "test --help" does not print help (POSIX compat), only "[ --help" does.
+ * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION") */
#define test_trivial_usage \
- "EXPRESSION\n" \
- " or [ EXPRESSION ]"
-#define test_full_usage \
- "Check file types and compares values returning an exit code\n" \
- "determined by the value of EXPRESSION"
+ "EXPRESSION ]"
+#define test_full_usage "\n\n" \
+ "Check file types, compare values etc. Return a 0/1 exit code\n" \
+ "depending on logical value of EXPRESSION"
#define test_example_usage \
"$ test 1 -eq 2\n" \
"$ echo $?\n" \
"$ echo $?\n" \
"1\n"
+#define tc_trivial_usage \
+ /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
+#define tc_full_usage "\n\n" \
+ "OBJECT: {qdisc|class|filter}\n" \
+ "CMD: {add|del|change|replace|show}\n" \
+ "\n" \
+ "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
+ /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
+ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
+ " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
+ "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
+ "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
+ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
+ "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
+ "filter [ pref PRIO ] [ protocol PROTO ]\n" \
+ /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
+ " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
+ " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
+ "filter show [ dev STRING ] [ root | parent CLASSID ]"
+
#define tcpsvd_trivial_usage \
- "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..."
+ "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
/* with not-implemented options: */
-/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */
-#define tcpsvd_full_usage \
- "Create TCP socket, bind it to ip:port and listen\n" \
+/* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
+#define tcpsvd_full_usage "\n\n" \
+ "Create TCP socket, bind to IP:PORT and listen\n" \
"for incoming connection. Run PROG for each connection.\n" \
- "\nip IP to listen on. '0' = all" \
- "\nport Port to listen on" \
- "\nprog [arg] Program to run" \
- "\n-l name Local hostname (else looks up local hostname in DNS)" \
- "\n-u user[:group] Change to user/group after bind" \
- "\n-c n Handle up to n connections simultaneously" \
- "\n-b n Allow a backlog of approximately n TCP SYNs" \
- "\n-C n[:msg] Allow only up to n connections from the same IP" \
+ "\nIP IP to listen on. '0' = all" \
+ "\nPORT Port to listen on" \
+ "\nPROG [ARGS] Program to run" \
+ "\n-l NAME Local hostname (else looks up local hostname in DNS)" \
+ "\n-u USER[:GROUP] Change to user/group after bind" \
+ "\n-c N Handle up to N connections simultaneously" \
+ "\n-b N Allow a backlog of approximately N TCP SYNs" \
+ "\n-C N[:MSG] Allow only up to N connections from the same IP" \
"\n New connections from this IP address are closed" \
- "\n immediately. 'msg' is written to the peer before close" \
+ "\n immediately. MSG is written to the peer before close" \
"\n-h Look up peer's hostname" \
"\n-E Do not set up environment variables" \
"\n-v Verbose" \
#define udpsvd_trivial_usage \
- "[-hEv] [-c n] [-u user] [-l name] ip port prog"
-#define udpsvd_full_usage \
- "Create UDP socket, bind it to ip:port and wait\n" \
+ "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
+#define udpsvd_full_usage "\n\n" \
+ "Create UDP socket, bind to IP:PORT and wait\n" \
"for incoming packets. Run PROG for each packet,\n" \
"redirecting all further packets with same peer ip:port to it\n" \
- "\nip IP to listen on. '0' = all" \
- "\nport Port to listen on" \
- "\nprog [arg] Program to run" \
- "\n-l name Local hostname (else looks up local hostname in DNS)" \
- "\n-u user[:group] Change to user/group after bind" \
- "\n-c n Handle up to n connections simultaneously" \
+ "\nIP IP to listen on. '0' = all" \
+ "\nPORT Port to listen on" \
+ "\nPROG [ARGS] Program to run" \
+ "\n-l NAME Local hostname (else looks up local hostname in DNS)" \
+ "\n-u USER[:GROUP] Change to user/group after bind" \
+ "\n-c N Handle up to N connections simultaneously" \
"\n-h Look up peer's hostname" \
"\n-E Do not set up environment variables" \
"\n-v Verbose" \
#define tftp_trivial_usage \
- "[OPTION]... HOST [PORT]"
-#define tftp_full_usage \
+ "[OPTIONS] HOST [PORT]"
+#define tftp_full_usage "\n\n" \
"Transfer a file from/to tftp server\n" \
"\nOptions:" \
"\n -l FILE Local FILE" \
"\n -r FILE Remote FILE" \
- USE_FEATURE_TFTP_GET( \
+ IF_FEATURE_TFTP_GET( \
"\n -g Get file" \
) \
- USE_FEATURE_TFTP_PUT( \
+ IF_FEATURE_TFTP_PUT( \
"\n -p Put file" \
) \
- USE_FEATURE_TFTP_BLOCKSIZE( \
+ IF_FEATURE_TFTP_BLOCKSIZE( \
"\n -b SIZE Transfer blocks of SIZE octets" \
)
#define tftpd_trivial_usage \
- "[-r] [DIR]"
-#define tftpd_full_usage \
- "Transfer a file on request from a tftp client.\n" \
+ "[-cr] [-u USER] [DIR]"
+#define tftpd_full_usage "\n\n" \
+ "Transfer a file on tftp client's request.\n" \
+ "\n" \
+ "tftpd should be used as an inetd service.\n" \
+ "tftpd's line for inetd.conf:\n" \
+ " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
+ "It also can be ran from udpsvd:\n" \
+ " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
"\nOptions:" \
"\n -r Prohibit upload" \
+ "\n -c Allow file creation via upload" \
+ "\n -u Access files as USER" \
#define time_trivial_usage \
- "[OPTION]... COMMAND [ARGS...]"
-#define time_full_usage \
- "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
- "COMMAND's resource usage information is displayed.\n" \
+ "[OPTIONS] PROG [ARGS]"
+#define time_full_usage "\n\n" \
+ "Run PROG. When it finishes, its resource usage is displayed.\n" \
"\nOptions:" \
"\n -v Verbose" \
+#define timeout_trivial_usage \
+ "[-t SECS] [-s SIG] PROG [ARGS]"
+#define timeout_full_usage "\n\n" \
+ "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
+ "Defaults: SECS: 10, SIG: TERM." \
+
#define top_trivial_usage \
- "[-b] [-n COUNT] [-d SECONDS]"
-#define top_full_usage \
+ "[-b] [-nCOUNT] [-dSECONDS]"
+#define top_full_usage "\n\n" \
"Provide a view of process activity in real time.\n" \
"Read the status of all processes from /proc each SECONDS\n" \
"and show the status for however many processes will fit on the screen." \
#define touch_trivial_usage \
- "[-c] FILE [FILE...]"
-#define touch_full_usage \
+ "[-c] [-d DATE] FILE [FILE]..."
+#define touch_full_usage "\n\n" \
"Update the last-modified date on the given FILE[s]\n" \
"\nOptions:" \
- "\n -c Do not create any files" \
+ "\n -c Do not create files" \
+ "\n -d DT Date/time to use" \
#define touch_example_usage \
"$ ls -l /tmp/foo\n" \
#define tr_trivial_usage \
"[-cds] STRING1 [STRING2]"
-#define tr_full_usage \
+#define tr_full_usage "\n\n" \
"Translate, squeeze, and/or delete characters from\n" \
"standard input, writing to standard output\n" \
"\nOptions:" \
"[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
" [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
" [-z pausemsecs] HOST [data size]"
-#define traceroute_full_usage \
+#define traceroute_full_usage "\n\n" \
"Trace the route to HOST\n" \
"\nOptions:" \
"\n -F Set the don't fragment bit" \
#define true_trivial_usage \
""
-#define true_full_usage \
+#define true_full_usage "\n\n" \
"Return an exit code of TRUE (0)"
#define true_example_usage \
"$ true\n" \
#define tty_trivial_usage \
""
-#define tty_full_usage \
+#define tty_full_usage "\n\n" \
"Print file name of standard input's terminal" \
- USE_INCLUDE_SUSv2( "\n" \
+ IF_INCLUDE_SUSv2( "\n" \
"\nOptions:" \
"\n -s Print nothing, only return exit status" \
)
#define ttysize_trivial_usage \
"[w] [h]"
-#define ttysize_full_usage \
+#define ttysize_full_usage "\n\n" \
"Print dimension(s) of standard input's terminal, on error return 80x25"
+#define tunctl_trivial_usage \
+ "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
+#define tunctl_full_usage "\n\n" \
+ "Create or delete tun interfaces" \
+ "\nOptions:" \
+ "\n -f name tun device (/dev/net/tun)" \
+ "\n -t name Create iface 'name'" \
+ "\n -d name Delete iface 'name'" \
+IF_FEATURE_TUNCTL_UG( \
+ "\n -u owner Set iface owner" \
+ "\n -g group Set iface group" \
+ "\n -b Brief output" \
+)
+#define tunctl_example_usage \
+ "# tunctl\n" \
+ "# tunctl -d tun0\n"
+
#define tune2fs_trivial_usage \
"[-c max-mounts-count] [-e errors-behavior] [-g group] " \
"[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
"[-r reserved-blocks-count] [-u user] [-C mount-count] " \
"[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
"[-T last-check-time] [-U UUID] device"
-#define tune2fs_full_usage \
+#define tune2fs_full_usage "\n\n" \
"Adjust filesystem options on ext[23] filesystems"
#define udhcpc_trivial_usage \
- "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
- " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." USE_FEATURE_UDHCP_PORT(" [-P N]")
-#define udhcpc_full_usage \
- USE_GETOPT_LONG( \
+ "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
+ " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
+#define udhcpc_full_usage "\n\n" \
+ IF_LONG_OPTS( \
" -V,--vendorclass=CLASSID Vendor class identifier" \
"\n -i,--interface=INTERFACE Interface to use (default eth0)" \
"\n -H,-h,--hostname=HOSTNAME Client hostname" \
"\n -C,--clientid-none Suppress default client identifier" \
"\n -p,--pidfile=file Create pidfile" \
"\n -r,--request=IP IP address to request" \
- "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -s,--script=file Run file at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
"\n -t,--retries=N Send up to N request packets" \
"\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \
"\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
+ "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \
+ "\n -o,--no-default-options Do not request any options (unless -O is also given)" \
"\n -f,--foreground Run in foreground" \
+ USE_FOR_MMU( \
"\n -b,--background Background if lease is not immediately obtained" \
+ ) \
"\n -S,--syslog Log to syslog too" \
"\n -n,--now Exit with failure if lease is not immediately obtained" \
"\n -q,--quit Quit after obtaining lease" \
"\n -R,--release Release IP on quit" \
- "\n -O,--request-option=OPT Request DHCP option OPT from server" \
- USE_FEATURE_UDHCP_PORT( \
+ IF_FEATURE_UDHCP_PORT( \
"\n -P,--client-port N Use port N instead of default 68" \
) \
- USE_FEATURE_UDHCPC_ARPING( \
+ IF_FEATURE_UDHCPC_ARPING( \
"\n -a,--arping Use arping to validate offered address" \
) \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_LONG_OPTS( \
" -V CLASSID Vendor class identifier" \
"\n -i INTERFACE Interface to use (default: eth0)" \
"\n -H,-h HOSTNAME Client hostname" \
"\n -C Suppress default client identifier" \
"\n -p file Create pidfile" \
"\n -r IP IP address to request" \
- "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -s file Run file at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
"\n -t N Send up to N request packets" \
"\n -T N Try to get a lease for N seconds (default 3)" \
"\n -A N Wait N seconds (default 20) after failure" \
+ "\n -O OPT Request DHCP option OPT (cumulative)" \
+ "\n -o Do not request any options (unless -O is also given)" \
"\n -f Run in foreground" \
+ USE_FOR_MMU( \
"\n -b Background if lease is not immediately obtained" \
+ ) \
"\n -S Log to syslog too" \
"\n -n Exit with failure if lease is not immediately obtained" \
"\n -q Quit after obtaining lease" \
"\n -R Release IP on quit" \
- "\n -O OPT Request DHCP option OPT from server" \
- USE_FEATURE_UDHCP_PORT( \
+ IF_FEATURE_UDHCP_PORT( \
"\n -P N Use port N instead of default 68" \
) \
- USE_FEATURE_UDHCPC_ARPING( \
+ IF_FEATURE_UDHCPC_ARPING( \
"\n -a Use arping to validate offered address" \
) \
)
#define udhcpd_trivial_usage \
- "[-fS]" USE_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
+ "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
-#define udhcpd_full_usage \
+#define udhcpd_full_usage "\n\n" \
"DHCP server\n" \
"\n -f Run in foreground" \
"\n -S Log to syslog too" \
- USE_FEATURE_UDHCP_PORT( \
+ IF_FEATURE_UDHCP_PORT( \
"\n -P N Use port N instead of default 67" \
)
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
-#define umount_full_usage \
+#define umount_full_usage "\n\n" \
"Unmount file systems\n" \
"\nOptions:" \
- USE_FEATURE_UMOUNT_ALL( \
- "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ IF_FEATURE_UMOUNT_ALL( \
+ "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
) \
- USE_FEATURE_MTAB_SUPPORT( \
+ IF_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries" \
) \
"\n -r Try to remount devices as read-only if mount is busy" \
"\n -l Lazy umount (detach filesystem)" \
"\n -f Force umount (i.e., unreachable NFS server)" \
- USE_FEATURE_MOUNT_LOOP( \
+ IF_FEATURE_MOUNT_LOOP( \
"\n -d Free loop device if it has been used" \
)
#define uname_trivial_usage \
"[-amnrspv]"
-#define uname_full_usage \
+#define uname_full_usage "\n\n" \
"Print system information.\n" \
"\nOptions:" \
"\n -a Print all" \
#define uncompress_trivial_usage \
"[-c] [-f] [name...]"
-#define uncompress_full_usage \
+#define uncompress_full_usage "\n\n" \
"Uncompress .Z file[s]\n" \
"\nOptions:" \
"\n -c Extract to stdout" \
#define unexpand_trivial_usage \
"[-f][-a][-t NUM] [FILE|-]"
-#define unexpand_full_usage \
+#define unexpand_full_usage "\n\n" \
"Convert spaces to tabs, writing to standard output.\n" \
"\nOptions:" \
- USE_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
"\n -a,--all Convert all blanks" \
"\n -f,--first-only Convert only leading blanks" \
"\n -t,--tabs=N Tabstops every N chars" \
) \
- SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
"\n -a Convert all blanks" \
"\n -f Convert only leading blanks" \
"\n -t N Tabstops every N chars" \
)
#define uniq_trivial_usage \
- "[-fscdu]... [INPUT [OUTPUT]]"
-#define uniq_full_usage \
- "Discard all but one of successive identical lines from INPUT\n" \
- "(or standard input), writing to OUTPUT (or standard output)\n" \
+ "[-fscduw]... [INPUT [OUTPUT]]"
+#define uniq_full_usage "\n\n" \
+ "Discard duplicate lines\n" \
"\nOptions:" \
"\n -c Prefix lines by the number of occurrences" \
"\n -d Only print duplicate lines" \
"\n -u Only print unique lines" \
- "\n -f N Skip the first N fields" \
- "\n -s N Skip the first N chars (after any skipped fields)" \
+ "\n -f N Skip first N fields" \
+ "\n -s N Skip first N chars (after any skipped fields)" \
+ "\n -w N Compare N characters in line" \
#define uniq_example_usage \
"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
"b\n" \
"c\n"
-#define unix2dos_trivial_usage \
- "[option] [FILE]"
-#define unix2dos_full_usage \
- "Convert FILE from unix to dos format.\n" \
- "When no file is given, use stdin/stdout.\n" \
- "\nOptions:" \
- "\n -u dos2unix" \
- "\n -d unix2dos" \
-
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
-#define unzip_full_usage \
+#define unzip_full_usage "\n\n" \
"Extract files from ZIP archives\n" \
"\nOptions:" \
"\n -l List archive contents (with -q for short form)" \
#define uptime_trivial_usage \
""
-#define uptime_full_usage \
+#define uptime_full_usage "\n\n" \
"Display the time since the last boot"
#define uptime_example_usage \
#define usleep_trivial_usage \
"N"
-#define usleep_full_usage \
+#define usleep_full_usage "\n\n" \
"Pause for N microseconds"
#define usleep_example_usage \
#define uudecode_trivial_usage \
"[-o outfile] [infile]"
-#define uudecode_full_usage \
+#define uudecode_full_usage "\n\n" \
"Uudecode a file\n" \
"Finds outfile name in uuencoded source unless -o is given"
#define uuencode_trivial_usage \
"[-m] [infile] stored_filename"
-#define uuencode_full_usage \
+#define uuencode_full_usage "\n\n" \
"Uuencode a file to stdout\n" \
"\nOptions:" \
"\n -m Use base64 encoding per RFC1521" \
"$\n"
#define vconfig_trivial_usage \
- "COMMAND [OPTIONS]..."
-#define vconfig_full_usage \
+ "COMMAND [OPTIONS]"
+#define vconfig_full_usage "\n\n" \
"Create and remove virtual ethernet devices\n" \
"\nOptions:" \
"\n add [interface-name] [vlan_id]" \
"\n set_name_type [name-type]" \
#define vi_trivial_usage \
- "[OPTION] [FILE]..."
-#define vi_full_usage \
+ "[OPTIONS] [FILE]..."
+#define vi_full_usage "\n\n" \
"Edit FILE\n" \
"\nOptions:" \
- USE_FEATURE_VI_COLON( \
+ IF_FEATURE_VI_COLON( \
"\n -c Initial command to run ($EXINIT also available)") \
- USE_FEATURE_VI_READONLY( \
+ IF_FEATURE_VI_READONLY( \
"\n -R Read-only - do not write to the file") \
"\n -H Short help regarding available features" \
#define vlock_trivial_usage \
"[OPTIONS]"
-#define vlock_full_usage \
+#define vlock_full_usage "\n\n" \
"Lock a virtual terminal. A password is required to unlock.\n" \
"\nOptions:" \
"\n -a Lock all VTs" \
+#define volname_trivial_usage \
+ "[DEVICE]"
+#define volname_full_usage "\n\n" \
+ "Show CD volume name of the DEVICE (default /dev/cdrom)"
+
#define watch_trivial_usage \
- "[-n seconds] [-t] COMMAND..."
-#define watch_full_usage \
- "Execute a program periodically\n" \
+ "[-n seconds] [-t] PROG [ARGS]"
+#define watch_full_usage "\n\n" \
+ "Run PROG periodically\n" \
"\nOptions:" \
"\n -n Loop period in seconds (default 2)" \
"\n -t Don't print header" \
"Mon Dec 17 10:31:44 GMT 2000"
#define watchdog_trivial_usage \
- "[-t N[ms]] [-F] DEV"
-#define watchdog_full_usage \
+ "[-t N[ms]] [-T N[ms]] [-F] DEV"
+#define watchdog_full_usage "\n\n" \
"Periodically write to watchdog device DEV\n" \
"\nOptions:" \
- "\n -t N Timer period (default 30)" \
+ "\n -T N Reboot after N seconds if not reset (default 60)" \
+ "\n -t N Reset every N seconds (default 30)" \
"\n -F Run in foreground" \
"\n" \
- "\nUse -t 500ms to specify period in milliseconds" \
+ "\nUse 500ms to specify period in milliseconds" \
#define wc_trivial_usage \
- "[OPTION]... [FILE]..."
-#define wc_full_usage \
+ "[OPTIONS] [FILE]..."
+#define wc_full_usage "\n\n" \
"Print line, word, and byte counts for each FILE, and a total line if\n" \
"more than one FILE is specified. With no FILE, read standard input.\n" \
"\nOptions:" \
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- USE_GETOPT_LONG( \
+ IF_FEATURE_WGET_LONG_OPTIONS( \
"[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url" \
) \
- SKIP_GETOPT_LONG( \
+ IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
"[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
)
-#define wget_full_usage \
+#define wget_full_usage "\n\n" \
"Retrieve files via HTTP or FTP\n" \
"\nOptions:" \
"\n -s Spider mode - only check file existence" \
"\n -Y Use proxy ('on' or 'off')" \
#define which_trivial_usage \
- "[COMMAND...]"
-#define which_full_usage \
+ "[COMMAND]..."
+#define which_full_usage "\n\n" \
"Locate a COMMAND"
#define which_example_usage \
"$ which login\n" \
#define who_trivial_usage \
"[-a]"
-#define who_full_usage \
+#define who_full_usage "\n\n" \
"Show who is logged on\n" \
"\nOptions:" \
"\n -a show all" \
#define whoami_trivial_usage \
""
-#define whoami_full_usage \
+#define whoami_full_usage "\n\n" \
"Print the user name associated with the current effective user id"
#define xargs_trivial_usage \
- "[OPTIONS] [COMMAND] [ARGS...]"
-#define xargs_full_usage \
- "Execute COMMAND on every item given by standard input\n" \
- "\nOptions:" \
- USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
- "\n -p Prompt the user about whether to run each command") \
- "\n -r Do not run command for empty read lines" \
- USE_FEATURE_XARGS_SUPPORT_TERMOPT( \
- "\n -x Exit if the size is exceeded") \
- USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
- "\n -0 Input filenames are terminated by a null character") \
- "\n -t Print the command line on stderr before executing it" \
+ "[OPTIONS] [PROG [ARGS]]"
+#define xargs_full_usage "\n\n" \
+ "Run PROG on every item given by standard input\n" \
+ "\nOptions:" \
+ IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
+ "\n -p Ask user whether to run each command") \
+ "\n -r Do not run command if input is empty" \
+ IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
+ "\n -0 Input is separated by NUL characters") \
+ "\n -t Print the command on stderr before execution" \
+ "\n -e[STR] STR stops input processing" \
+ "\n -n N Pass no more than N args to PROG" \
+ "\n -s N Pass command line of no more than N bytes" \
+ IF_FEATURE_XARGS_SUPPORT_TERMOPT( \
+ "\n -x Exit if size is exceeded") \
#define xargs_example_usage \
"$ ls | xargs gzip\n" \
"$ find . -name '*.c' -print | xargs rm\n"
#define yes_trivial_usage \
- "[OPTION]... [STRING]..."
-#define yes_full_usage \
- "Repeatedly output a line with all specified STRING(s), or 'y'"
+ "[OPTIONS] [STRING]"
+#define yes_full_usage "\n\n" \
+ "Repeatedly output a line with STRING, or 'y'"
#define zcat_trivial_usage \
"FILE"
-#define zcat_full_usage \
+#define zcat_full_usage "\n\n" \
"Uncompress to stdout"
#define zcip_trivial_usage \
- "[OPTIONS] ifname script"
-#define zcip_full_usage \
+ "[OPTIONS] IFACE SCRIPT"
+#define zcip_full_usage "\n\n" \
"Manage a ZeroConf IPv4 link-local address\n" \
"\nOptions:" \
"\n -f Run in foreground" \
- "\n -q Quit after address (no daemon)" \
+ "\n -q Quit after obtaining address" \
"\n -r 169.254.x.x Request this address first" \
"\n -v Verbose" \
+ "\n" \
+ "\nWith no -q, runs continuously monitoring for ARP conflicts," \
+ "\nexits only on I/O errors (link down etc)" \
+
-#endif /* __BB_USAGE_H__ */
+#endif
projects / oweals / busybox.git / blobdiff