#define adduser_full_usage \
"Add a user to the system" \
"\n\nOptions:\n" \
- " -h DIR Assign home directory DIR\n" \
- " -g GECOS Assign gecos field GECOS\n" \
- " -s SHELL Assign login shell SHELL\n" \
- " -G Add the user to existing group GROUP\n" \
+ " -h DIR Home directory\n" \
+ " -g GECOS GECOS field\n" \
+ " -s SHELL Login shell\n" \
+ " -G GROUP Add user to existing group\n" \
" -S Create a system user (ignored)\n" \
" -D Do not assign a password (logins still possible via ssh)\n" \
- " -H Do not create the home directory"
+ " -H Do not create home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
" -q Quiet\n" \
" -o offset Time offset, microseconds\n" \
" -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
- " (positive values make the system clock run fast)\n" \
+ " (positive values make the system clock run faster)\n" \
" -t tick Microseconds per tick, usually 10000\n" \
" -p timeconstant"
" -A ARP answer mode, update your neighbours\n" \
" -c count Stop after sending count ARP request packets\n" \
" -w timeout Time to wait for ARP reply, in seconds\n" \
- " -i device Outgoing interface name, default is eth0\n" \
+ " -I device Outgoing interface name, default is eth0\n" \
" -s sender Set specific sender IP address\n" \
" target Target IP address of ARP request"
"[OPTION]... [program-text] [FILE ...]"
#define awk_full_usage \
"Options:\n" \
- " -v var=val Assign value 'val' to variable 'var'\n" \
+ " -v var=val Set variable\n" \
" -F sep Use 'sep' as field separator\n" \
- " -f progname Read program source from file 'progname'"
+ " -f filename Read program from file"
#define basename_trivial_usage \
"FILE [SUFFIX]"
#define cat_full_usage \
"Concatenate FILE(s) and print them to stdout" \
"\n\nOptions:" \
- "\n -u Ignored since unbuffered i/o is always used"
+ "\n -u Use unbuffered i/o (ignored)"
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
"Each MODE is one or more of the letters ugoa, one of the\n" \
"symbols +-= and one or more of the letters rwxst" \
"\n\nOptions:" \
- "\n -R Changes files and directories recursively" \
+ "\n -R Recurse directories" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
#define chown_trivial_usage \
- "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
"Change the owner and/or group of each FILE to OWNER and/or GROUP" \
"\n\nOptions:" \
" -s n Limit the stack segment per process to n bytes\n" \
" -l n Limit the locked physical pages per process to n bytes\n" \
" -a n Limit the total of all segments per process to n bytes\n" \
- " -o n Limit the number of open file descriptors per process to n\n" \
+ " -o n Limit the number of open file descriptors per process to n\n" \
" -p n Limit the number of processes per uid to n\n" \
"Options controlling file sizes:\n" \
" -f n Limit output file sizes to n bytes\n" \
" -m show min and max priorities"
#define chrt_example_usage \
- "$ chrt -r 4 sleep 900 ; x=$!\n" \
+ "$ chrt -r 4 sleep 900; x=$!\n" \
"$ chrt -f -p 3 $x\n" \
"You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
" F Input from file"
#define crond_trivial_usage \
- "-d[#] -c <crondir> -f -b"
+ "-d[#] -c crondir -f -b"
#define crond_full_usage \
" -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
" -d num Debug level\n" \
#define crontab_trivial_usage \
"[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
- " File <opts> replace crontab from file\n" \
- " - <opts> replace crontab from stdin\n" \
- " -u user specify user\n" \
- " -l [user] list crontab for user\n" \
- " -e [user] edit crontab for user\n" \
- " -d [user] delete crontab for user\n" \
- " -c dir specify crontab directory"
+ " file [opts] Replace crontab from file\n" \
+ " - [opts] Replace crontab from stdin\n" \
+ " -u user Specify user\n" \
+ " -l [user] List crontab for user\n" \
+ " -e [user] Edit crontab for user\n" \
+ " -d [user] Delete crontab for user\n" \
+ " -c dir Specify crontab directory"
#define cryptpw_trivial_usage \
"[-a des|md5] [string]"
#define dd_trivial_usage \
"[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
- " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
+ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
#define dd_full_usage \
"Copy a file with converting and formatting" \
"\n\nOptions:\n" \
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
- USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
+ USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
#define delgroup_full_usage \
"Delete group GROUP from the system" \
- USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
+ USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
#define dos2unix_trivial_usage \
"[option] [FILE]"
#define dos2unix_full_usage \
- "Convert FILE from dos format to unix format. When no option\n" \
+ "Convert FILE from dos format to unix format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
"When no file is given, use stdin for input and stdout for output." \
"\n\nOptions:\n" \
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
"Erik is cool\n" \
- USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
+ USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
" (EXPRESSION) Value of EXPRESSION\n\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
- "lexicographical. Pattern matches return the string matched between\n" \
+ "lexicographical. Pattern matches return the string matched between\n" \
"\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
"of characters matched or 0."
#define find_trivial_usage \
"[PATH...] [EXPRESSION]"
#define find_full_usage \
- "Search for files in a directory hierarchy. The default PATH is\n" \
- "the current directory; default EXPRESSION is '-print'\n" \
- "\nEXPRESSION may consist of:\n" \
- " -follow Dereference symlinks\n" \
- " -name PATTERN File name (leading directories removed) matches PATTERN\n" \
- " -print Print (default and assumed)" \
+ "Search for files in a directory hierarchy. The default PATH is\n" \
+ "the current directory, default EXPRESSION is '-print'\n" \
+ "\nEXPRESSION may consist of:" \
+ "\n -follow Dereference symlinks" \
+ USE_FEATURE_FIND_XDEV( \
+ "\n -xdev Don't descend directories on other filesystems") \
+ USE_FEATURE_FIND_MAXDEPTH( \
+ "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
+ "\n tests/actions to command line arguments only") \
+ "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
+ USE_FEATURE_FIND_PATH( \
+ "\n -path PATTERN Path matches PATTERN") \
+ USE_FEATURE_FIND_REGEX( \
+ "\n -regex PATTERN Path matches regex PATTERN") \
+ USE_FEATURE_FIND_TYPE( \
+ "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
+ USE_FEATURE_FIND_PERM( \
+ "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
+ "\n or exactly (NNN)") \
+ USE_FEATURE_FIND_MTIME( \
+ "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
+ "\n or exactly (N) days") \
+ USE_FEATURE_FIND_MMIN( \
+ "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
+ "\n or exactly (N) minutes") \
+ USE_FEATURE_FIND_NEWER( \
+ "\n -newer FILE Modified time is more recent than FILE's") \
+ USE_FEATURE_FIND_INUM( \
+ "\n -inum N File has inode number N") \
+ USE_FEATURE_FIND_USER( \
+ "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
+ USE_FEATURE_FIND_GROUP( \
+ "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
+ USE_FEATURE_FIND_DEPTH( \
+ "\n -depth Process directory name after traversing it") \
+ USE_FEATURE_FIND_SIZE( \
+ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \
+ "\n +/-N: file size is bigger/smaller than N") \
+ "\n -print Print (default and assumed)" \
USE_FEATURE_FIND_PRINT0( \
- "\n -print0 Delimit output with null characters rather than" \
- "\n newlines" \
- ) USE_FEATURE_FIND_TYPE( \
- "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \
- ) USE_FEATURE_FIND_PERM( \
- "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \
- "\n or exactly (NNN)" \
- ) USE_FEATURE_FIND_MTIME( \
- "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \
- "\n Or exactly (N) days" \
- ) USE_FEATURE_FIND_MMIN( \
- "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
- "\n or exactly (N) minutes" \
- ) USE_FEATURE_FIND_NEWER( \
- "\n -newer FILE Modified time is more recent than FILE's" \
- ) USE_FEATURE_FIND_INUM( \
- "\n -inum N File has inode number N" \
- ) USE_FEATURE_FIND_EXEC( \
- "\n -exec CMD Execute CMD with all instances of {} replaced by the" \
- "\n files matching EXPRESSION" \
- ) USE_FEATURE_FIND_USER( \
- "\n -user NAME File is owned by user NAME (numeric user ID allowed)" \
- ) USE_FEATURE_FIND_GROUP( \
- "\n -group NAME File belongs to group NAME (numeric group ID allowed)" \
- ) USE_FEATURE_FIND_DEPTH( \
- "\n -depth Process directory after traversing it" \
- ) USE_FEATURE_FIND_SIZE( \
- "\n -size N File size is N" \
- ) USE_FEATURE_FIND_PRUNE( \
- "\n -prune Stop traversing current subtree" \
- ) USE_FEATURE_FIND_DELETE( \
- "\n -delete Delete files; Turns on -depth option" \
- ) USE_FEATURE_FIND_PATH( \
- "\n -path Path matches PATTERN" \
- ) USE_FEATURE_FIND_PAREN( \
- "\n (EXPR) Group an expression" \
- )
+ "\n -print0 Delimit output with null characters rather than" \
+ "\n newlines") \
+ USE_FEATURE_FIND_CONTEXT ( \
+ "\n -context File has specified security context") \
+ USE_FEATURE_FIND_EXEC( \
+ "\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \
+ "\n matching files") \
+ USE_FEATURE_FIND_PRUNE( \
+ "\n -prune Stop traversing current subtree") \
+ USE_FEATURE_FIND_DELETE( \
+ "\n -delete Delete files, turns on -depth option") \
+ USE_FEATURE_FIND_PAREN( \
+ "\n (EXPR) Group an expression") \
#define find_example_usage \
"$ find / -name passwd\n" \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
- "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]"
+ "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys ...]"
#define fsck_full_usage \
"Check and repair filesystems" \
"\n\nOptions:\n" \
"#!/bin/sh\n" \
"GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
" -n 'example.busybox' -- \"$@\"`\n" \
- "if [ $? != 0 ] ; then exit 1 ; fi\n" \
+ "if [ $? != 0 ]; then exit 1; fi\n" \
"eval set -- \"$GETOPT\"\n" \
- "while true ; do\n" \
+ "while true; do\n" \
" case $1 in\n" \
- " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
- " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \
+ " -a|--a-long) echo \"Option a\"; shift;;\n" \
+ " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
" -c|--c-long)\n" \
" case \"$2\" in\n" \
- " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
- " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \
- " esac ;;\n" \
- " --) shift ; break ;;\n" \
- " *) echo \"Internal error!\" ; exit 1 ;;\n" \
+ " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
+ " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
+ " esac;;\n" \
+ " --) shift; break;;\n" \
+ " *) echo \"Internal error!\"; exit 1;;\n" \
" esac\n" \
"done\n"
"\n -v Select non-matching lines" \
"\n -s Suppress file open/read error messages" \
"\n -c Only print count of matching lines" \
- "\n -f Read PATTERN from file" \
"\n -o Show only the part of a line that matches PATTERN" \
+ "\n -m MAX Match up to MAX times per file" \
USE_DESKTOP( \
"\n -w Match whole words only") \
- "\n -e PATTERN is a regular expression" \
"\n -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
+ "\n -e PTRN Pattern to match" \
+ "\n -f FILE Read pattern from file" \
USE_FEATURE_GREP_CONTEXT( \
"\n -A Print NUM lines of trailing context" \
"\n -B Print NUM lines of leading context" \
"[OPTION]... [FILE]..."
#define gzip_full_usage \
"Compress FILE(s) with maximum compression.\n" \
- "When FILE is '-' or unspecified, reads standard input. Implies -c." \
+ "When FILE is '-' or unspecified, reads standard input. Implies -c." \
"\n\nOptions:\n" \
" -c Write output to standard output instead of FILE.gz\n" \
" -d Decompress\n" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d delay] [-n] [-f]"
#define halt_full_usage \
"Halt the system" \
"\n\nOptions:\n" \
"sage\n"
#define httpd_trivial_usage \
- "[-c <conf file>]" \
- " [-p <port>]" \
+ "[-c conffile]" \
+ " [-p port]" \
" [-i] [-f]" \
USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
- USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
+ USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \
USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
" [-h home]" \
- " [-d/-e <string>]"
+ " [-d/-e string]"
#define httpd_full_usage \
"Listen for incoming http server requests" \
"\n\nOptions:\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
#define ifconfig_trivial_usage \
- USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
+ USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
#define ifconfig_full_usage \
"Configure a network interface" \
"\n\nOptions:\n" \
USE_FEATURE_IPV6( \
- " [add <address>[/<prefixlen>]]\n") \
+ " [add ADDRESS[/PREFIXLEN]]\n") \
USE_FEATURE_IPV6( \
- " [del <address>[/<prefixlen>]]\n") \
- " [[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
- " [netmask <address>] [dstaddr <address>]\n" \
+ " [del ADDRESS[/PREFIXLEN]]\n") \
+ " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
+ " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
USE_FEATURE_IFCONFIG_SLIP( \
- " [outfill <NN>] [keepalive <NN>]\n") \
- " " USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") "[metric <NN>] [mtu <NN>]\n" \
+ " [outfill NN] [keepalive NN]\n") \
+ " " USE_FEATURE_IFCONFIG_HW("[hw ether ADDRESS] ") "[metric NN] [mtu NN]\n" \
" [[-]trailers] [[-]arp] [[-]allmulti]\n" \
- " [multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
+ " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
- " [mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
+ " [mem_start NN] [io_addr NN] [irq NN]\n") \
" [up|down] ..."
#define ifup_trivial_usage \
- "<-ahinv> <ifaces...>"
+ "[-ahinv] ifaces..."
#define ifup_full_usage \
"Options:\n" \
" -a De/configure all interfaces automatically\n" \
" -f Force de/configuration"
#define ifdown_trivial_usage \
- "<-ahinv> <ifaces...>"
+ "[-ahinv] ifaces..."
#define ifdown_full_usage \
"Options:\n" \
" -a De/configure all interfaces automatically\n" \
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
-"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
+"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
"runlevels, use sysvinit.\n" \
"\n" \
-"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
+"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
"it has the following default behavior:\n" \
"\n" \
" ::sysinit:/etc/init.d/rcS\n" \
"\n" \
" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
" The id field is used by BusyBox init to specify the controlling tty for\n" \
-" the specified process to run on. The contents of this field are\n" \
-" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
-" be unique, although if it isn't you may have strange results. If this\n" \
-" field is left blank, the controlling tty is set to the console. Also\n" \
+" the specified process to run on. The contents of this field are\n" \
+" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
+" be unique, although if it isn't you may have strange results. If this\n" \
+" field is left blank, the controlling tty is set to the console. Also\n" \
" note that if BusyBox detects that a serial console is in use, then only\n" \
" entries whose controlling tty is either the serial console or /dev/null\n" \
-" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
+" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
" stinkin' utmp.\n" \
"\n" \
" <runlevels>:\n" \
"\n" \
" Run only-once actions:\n" \
"\n" \
-" 'sysinit' is the first item run on boot. init waits until all\n" \
-" sysinit actions are completed before continuing. Following the\n" \
+" 'sysinit' is the first item run on boot. init waits until all\n" \
+" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
-" the specified task completes. 'once' actions are asynchronous,\n" \
-" therefore, init does not wait for them to complete. 'restart' is\n" \
-" the action taken to restart the init process. By default this should\n" \
+" the specified task completes. 'once' actions are asynchronous,\n" \
+" therefore, init does not wait for them to complete. 'restart' is\n" \
+" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
-" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
+" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
-" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
+" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
" wants to run 'reboot' at this point to cause the system to reboot.\n" \
" Finally the 'shutdown' action specifies the actions to taken when\n" \
-" init is told to reboot. Unmounting filesystems and disabling swap\n" \
+" init is told to reboot. Unmounting filesystems and disabling swap\n" \
" is a very good here.\n" \
"\n" \
" Run repeatedly actions:\n" \
"\n" \
-" 'respawn' actions are run after the 'once' actions. When a process\n" \
+" 'respawn' actions are run after the 'once' actions. When a process\n" \
" started with a 'respawn' action exits, init automatically restarts\n" \
-" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
-" respawning out of control. The 'askfirst' actions acts just like\n" \
+" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
+" respawning out of control. The 'askfirst' actions acts just like\n" \
" respawn, except that before running the specified process it\n" \
" displays the line \"Please press Enter to activate this console.\"\n" \
" and then waits for the user to press enter before starting the\n" \
" specified process.\n" \
"\n" \
" Unrecognized actions (like initdefault) will cause init to emit an\n" \
-" error message, and then go along with its business. All actions are\n" \
+" error message, and then go along with its business. All actions are\n" \
" run in the order they appear in /etc/inittab.\n" \
"\n" \
" <process>:\n" \
"\n\nOptions:\n" \
" -f Force module to load into the wrong kernel version\n" \
" -k Make module autoclean-able\n" \
- " -v Verbose\n" \
+ " -v Verbose\n" \
" -q Quiet\n" \
" -L Lock to prevent simultaneous loads of a module\n" \
USE_FEATURE_INSMOD_LOAD_MAP( \
" -x Do not export externs"
#define install_trivial_usage \
- "[-cgmops] [sources] <dest|directory>"
+ "[-cgmops] [sources] dest|directory"
#define install_full_usage \
"Copy files and set attributes" \
"\n\nOptions:\n" \
"} {COMMAND}"
#define ip_full_usage \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
- "where OBJECT := {" \
+ "where OBJECT := {" \
USE_FEATURE_IP_ADDRESS("address | ") \
USE_FEATURE_IP_ROUTE("route | ") \
USE_FEATURE_IP_LINK("link | ") \
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
- " [ dev STRING ] [ to PREFIX ] }"
+ " [dev STRING] [to PREFIX] }"
#define ipaddr_full_usage \
"ipaddr {add|delete} IFADDR dev STRING\n" \
- "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
- " [ to PREFIX ] [ label PATTERN ]\n" \
+ "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
+ " [to PREFIX] [label PATTERN]\n" \
" IFADDR := PREFIX | ADDR peer PREFIX\n" \
- " [ broadcast ADDR ] [ anycast ADDR ]\n" \
- " [ label STRING ] [ scope SCOPE-ID ]\n" \
- " SCOPE-ID := [ host | link | global | NUMBER ]"
+ " [broadcast ADDR] [anycast ADDR]\n" \
+ " [label STRING] [scope SCOPE-ID]\n" \
+ " SCOPE-ID := [host | link | global | NUMBER]"
#define ipcalc_trivial_usage \
- "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
+ "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]"
#define ipcalc_full_usage \
"Calculate IP network settings from a IP address" \
"\n\nOptions:" \
" -u Summary"
#define iplink_trivial_usage \
- "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
+ "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
#define iplink_full_usage \
"iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
- "iplink show [ DEVICE ]"
+ "iplink show [DEVICE]"
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
" replace | monitor } ROUTE }"
#define iproute_full_usage \
"iproute { list | flush } SELECTOR\n" \
- "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
- " [ oif STRING ] [ tos TOS ]\n" \
+ "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
+ " [oif STRING] [tos TOS]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
- " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
- " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
+ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
+ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]"
#define iprule_trivial_usage \
- "{[ list | add | del ] RULE}"
+ "{[list | add | del] RULE}"
#define iprule_full_usage \
- "iprule [ list | add | del ] SELECTOR ACTION\n" \
- " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \
- " [ dev STRING ] [ pref NUMBER ]\n" \
- " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \
- " [ prohibit | reject | unreachable ]\n" \
- " [ realms [SRCREALM/]DSTREALM ]\n" \
- " TABLE_ID := [ local | main | default | NUMBER ]"
+ "iprule [list | add | del] SELECTOR ACTION\n" \
+ " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
+ " [dev STRING] [pref NUMBER]\n" \
+ " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
+ " [prohibit | reject | unreachable]\n" \
+ " [realms [SRCREALM/]DSTREALM]\n" \
+ " TABLE_ID := [local | main | default | NUMBER]"
#define iptunnel_trivial_usage \
- "{ add | change | del | show } [ NAME ]\n" \
- " [ mode { ipip | gre | sit } ]\n" \
- " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+ "{ add | change | del | show } [NAME]\n" \
+ " [mode { ipip | gre | sit }]\n" \
+ " [remote ADDR] [local ADDR] [ttl TTL]"
#define iptunnel_full_usage \
- "iptunnel { add | change | del | show } [ NAME ]\n" \
- " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
- " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
- " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
+ "iptunnel { add | change | del | show } [NAME]\n" \
+ " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
+ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
+ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]"
#define kill_trivial_usage \
"[-l] [-signal] process-id [process-id ...]"
" reached"
#define setarch_trivial_usage \
- "<personality> <program> [args ...]"
+ "personality program [args ...]"
#define setarch_full_usage \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage \
- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
+ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
"\n\nOptions:\n" \
" -s Log to stderr as well as the system log\n" \
" -t TAG Log using the specified tag (defaults to user name)\n" \
#define losetup_notes_usage \
"No arguments will display all current associations.\n" \
"One argument (losetup /dev/loop1) will display the current association\n" \
- "(if any), or disassociate it (with -d). The display shows the offset\n" \
+ "(if any), or disassociate it (with -d). The display shows the offset\n" \
"and filename of the file the loop device is currently bound to.\n\n" \
"Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
- "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
+ "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
#define ls_trivial_usage \
"[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
" b Block special device file\n" \
" p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
- "target file. The rest of the entries (major, minor, etc) apply to\n" \
- "to device special files. A '-' may be used for blank entries."
+ "target file. The rest of the entries (major, minor, etc) apply to\n" \
+ "to device special files. A '-' may be used for blank entries."
#define makedevs_example_usage \
"For example:\n" \
"<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
USE_FEATURE_MDEV_EXEC( \
"Optionally, that can be followed (on the same line) by a special character\n" \
"and a command line to run after creating/before deleting the corresponding\n" \
- "device(s). The environment variable $MDEV indicates the active device node\n" \
- "(which is useful if it's a regex match). For example:\n\n" \
+ "device(s). The environment variable $MDEV indicates the active device node\n" \
+ "(which is useful if it's a regex match). For example:\n\n" \
" hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
"The special characters are @ (run after creating), $ (run before deleting),\n" \
- "and * (run both after creating and before deleting). The commands run in\n" \
+ "and * (run both after creating and before deleting). The commands run in\n" \
"the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
- "Config file parsing stops on the first matching line. If no config\n"\
- "entry is matched, devices are created with default 0:0 660. (Make\n"\
+ "Config file parsing stops on the first matching line. If no config\n"\
+ "entry is matched, devices are created with default 0:0 660. (Make\n"\
"the last line match .* to override this.)\n\n" \
)
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
- "\n\nOptions:\n" \
+ "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
+ "\n\nOptions:\n" \
" -a Mount all filesystems in fstab\n" \
USE_FEATURE_MTAB_SUPPORT( \
" -f \"Fake\" Add entry to mount table but don't mount it\n" \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
"mountpoint checks if the directory is a mountpoint" \
- "\n\nOptions:\n" \
+ "\n\nOptions:\n" \
" -q Quiet\n" \
" -d Print major/minor device number of the filesystem\n" \
" -x Print major/minor device number of the blockdevice"
#endif
-
#define netstat_trivial_usage \
- "[-laenrtuwx]"
+ "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]"
#define netstat_full_usage \
"Display networking information" \
- "\n\nOptions:\n" \
- " -l Display listening server sockets\n" \
- " -a Display all sockets (default: connected)\n" \
- " -e Display other/more information\n" \
- " -n Don't resolve names\n" \
- " -r Display routing table\n" \
- " -t Tcp sockets\n" \
- " -u Udp sockets\n" \
- " -w Raw sockets\n" \
- " -x Unix sockets"
+ "\n\nOptions:" \
+ "\n -l Display listening server sockets" \
+ "\n -a Display all sockets (default: connected)" \
+ "\n -e Display other/more information" \
+ "\n -n Don't resolve names" \
+ "\n -t Tcp sockets" \
+ "\n -u Udp sockets" \
+ "\n -w Raw sockets" \
+ "\n -x Unix sockets" \
+ "\n -r Display routing table" \
+ USE_FEATURE_NETSTAT_WIDE( \
+ "\n -W Display with no column truncation" \
+ )
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG] ...]"
"[-aBbcDdeFfHhIiLlOovXx] [FILE]"
#define od_full_usage \
"Write an unambiguous representation, octal bytes by default, of FILE\n" \
- "to standard output. With no FILE, or when FILE is -, read standard input."
+ "to standard output. With no FILE, or when FILE is -, read standard input."
#define openvt_trivial_usage \
- "<vtnum> <COMMAND> [ARGS...]"
+ "VTNUM COMMAND [ARGS...]"
#define openvt_full_usage \
"Start a command on a new virtual terminal"
#define openvt_example_usage \
" -l Locks (disables) the specified user account\n" \
" -u Unlocks (re-enables) the specified user account"
+#define chpasswd_trivial_usage \
+ "[--md5|--encrypt]"
+#define chpasswd_full_usage \
+ "Read user:password information from stdin\n" \
+ "and update /etc/passwd accordingly." \
+ "\n\nOptions:" \
+ "\n -e, --encrypt Supplied passwords are in encrypted form" \
+ "\n -m, --md5 Use MD5 encryption instead of DES"
+
#define patch_trivial_usage \
- "[-p<num>] [-i <diff>]"
+ "[-p num] [-i diff]"
#define patch_full_usage \
" -p NUM Strip NUM leading components from file names\n" \
" -i DIFF Read DIFF instead of stdin"
USE_FEATURE_PIDOF_SINGLE( \
"\n -s Display only a single PID") \
USE_FEATURE_PIDOF_OMIT( \
- "\n -o Omit given pid") \
+ "\n -o PID Omit given pid") \
USE_FEATURE_PIDOF_OMIT( \
"\n Use %PPID to omit the parent pid of pidof itself")
#define pidof_example_usage \
"the new root file system"
#define poweroff_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d delay] [-n] [-f]"
#define poweroff_full_usage \
"Halt and shut off power" \
"\n\nOptions:\n" \
" 745 root root S [getty]\n" \
" 2990 andersen andersen R ps\n"
+#define pscan_trivial_usage \
+ "[-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
+#define pscan_full_usage \
+ "Scan a host, print all open ports" \
+ "\n\nOptions:" \
+ "\n -p Scan from this port (default 1)" \
+ "\n -P Scan up to this port (default 1024)" \
+ "\n -t Timeout (default 5000 ms)" \
+ "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
#define pwd_trivial_usage \
""
"[OPTIONS]..."
#define readprofile_full_usage \
"Options:\n" \
- " -m <mapfile> (Default: /boot/System.map)\n" \
- " -p <profile> (Default: /proc/profile)\n" \
- " -M <mult> Set the profiling multiplier to <mult>\n" \
+ " -m mapfile (Default: /boot/System.map)\n" \
+ " -p profile (Default: /proc/profile)\n" \
+ " -M mult Set the profiling multiplier to mult\n" \
" -i Print only info about the sampling step\n" \
" -v Verbose\n" \
" -a Print all symbols, even if count is 0\n" \
" -n Disable byte order auto-detection"
#define realpath_trivial_usage \
- "pathname ..."
+ "pathname ..."
#define realpath_full_usage \
"Return the absolute pathnames of given argument"
#define reboot_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d delay] [-n] [-f]"
#define reboot_full_usage \
"Reboot the system" \
"\n\nOptions:\n" \
" -f Force reboot (don't go through init)"
#define renice_trivial_usage \
- "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
+ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID ...]"
#define renice_full_usage \
"Change priority of running processes" \
"\n\nOptions:\n" \
#define resize_full_usage \
"Resize the screen"
+#define restorecon_trivial_usage \
+ "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
+#define restorecon_full_usage \
+ "Reset security contexts of files in pathname\n" \
+ "\n -i Ignore files that do not exist" \
+ "\n -f filename File with list of files to process. Use - for stdin" \
+ "\n -e directory Directory to exclude" \
+ "\n -R,-r Recurse directories" \
+ "\n -n Don't change any file labels" \
+ "\n -o filename Save list of files with incorrect context" \
+ "\n -v Verbose" \
+ "\n -vv Show changed labels" \
+ "\n -F Force reset of context to match file_context" \
+ "\n for customizable files, or the user section," \
+ "\n if it has changed"
+
#define rm_trivial_usage \
"[OPTION]... FILE..."
#define rm_full_usage \
- "Remove (unlink) the FILE(s). You may use '--' to\n" \
+ "Remove (unlink) the FILE(s). You may use '--' to\n" \
"indicate that all following arguments are non-options." \
"\n\nOptions:\n" \
" -i Always prompt before removing each destination\n" \
"Output a cpio archive of the rpm file"
#define runcon_trivial_usage \
- "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
- " runcon CONTEXT COMMAND [args]"
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
+ " runcon CONTEXT COMMAND [args]"
#define runcon_full_usage \
"runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
"runcon CONTEXT COMMAND [args]\n" \
"$ run-parts -a stop=now /etc/init.d\n\n" \
"Let's assume you have a script foo/dosomething:\n" \
"#!/bin/sh\n" \
- "for i in $*; do eval $i; done ; unset i\n" \
+ "for i in $*; do eval $i; done; unset i\n" \
"case \"$1\" in\n" \
- "start*) echo starting something ;;\n" \
- "stop*) set -x ; shutdown -h $stop ;;\n" \
+ "start*) echo starting something;;\n" \
+ "stop*) set -x; shutdown -h $stop;;\n" \
"esac\n\n" \
"Running this yields:\n" \
"$run-parts -a stop=+4m foo/\n" \
"\n" \
"If no -e or -f is given, the first non-option argument is taken as the sed\n" \
"script to interpret. All remaining arguments are names of input files; if no\n" \
- "input files are specified, then the standard input is read. Source files\n" \
+ "input files are specified, then the standard input is read. Source files\n" \
"will not be modified unless -i option is given."
#define sed_example_usage \
" -r Reset output to /dev/console"
#define setenforce_trivial_usage \
- "[ Enforcing | Permissive | 1 | 0 ]"
+ "[Enforcing | Permissive | 1 | 0]"
#define setenforce_full_usage
+#define setfiles_trivial_usage \
+ "[-dnpqsvW] [-e dir]... [-o filename] [-r alt_root_path]" \
+ USE_FEATURE_SETFILES_CHECK_OPTION( \
+ " [-c policyfile] spec_file" \
+ ) \
+ " pathname"
+
+#define setfiles_full_usage \
+ "Reset file contexts under pathname according to spec_file" \
+ USE_FEATURE_SETFILES_CHECK_OPTION( \
+ "\n -c file Check the validity of the contexts against the specified binary policy" \
+ ) \
+ "\n -d Show which specification matched each file" \
+ "\n -l Log changes in file labels to syslog" \
+ "\n -n Don't change any file labels" \
+ "\n -q Suppress warnings" \
+ "\n -r dir Use an altenate root path" \
+ "\n -e dir Exclude directory" \
+ "\n -F Force reset of context to match file_context for customizable files" \
+ "\n -o file Save list of files with incorrect context" \
+ "\n -s Take a list of files from standard input (instead of command line)" \
+ "\n -v Show changes in file labels, if type or role are changing" \
+ "\n -vv Show changes in file labels, if type, role, or user are changing" \
+ "\n -W Display warnings about entries that had no matching files"
+
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
"program [arg ...]"
#define setsid_full_usage \
"Run any program in a new session by calling setsid() before\n" \
- "exec'ing the rest of its arguments. See setsid(2) for details."
+ "exec'ing the rest of its arguments. See setsid(2) for details."
#define lash_trivial_usage \
"[FILE]...\n" \
"The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
"This command does not yet have proper documentation.\n\n" \
- "Use lash just as you would use any other shell. It properly handles pipes,\n" \
+ "Use lash just as you would use any other shell. It properly handles pipes,\n" \
"redirects, job control, can be used as the shell for scripts, and has a\n" \
- "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
- "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
- "use ash or bash. If you just need a very simple and extremely small shell,\n" \
+ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
+ "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
+ "use ash or bash. If you just need a very simple and extremely small shell,\n" \
"this will do the job."
#define last_trivial_usage \
" -s Don't output anything, status code shows success\n" \
" -w Warn about improperly formatted SHA1 checksum lines")
+#define slattach_trivial_usage \
+ "[-cehmLF] [-s speed] [-p protocol] DEVICEs"
+#define slattach_full_usage \
+ "Attach network interface(s) to serial line(s)\n" \
+ "\nOptions:" \
+ "\n -p Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
+ "\n -s Set line speed" \
+ "\n -e Exit after initializing device" \
+ "\n -h Exit when the carrier is lost" \
+ "\n -c Execute a command when the line is hung up" \
+ "\n -m Do NOT initialize the line in raw 8 bits mode" \
+ "\n -L Enable 3-wire operation" \
+ "\n -F Disable RTS/CTS flow control" \
+
#define sleep_trivial_usage \
USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
"[OPTION] [INPUT [PREFIX]]"
#define split_full_usage \
"Options:" \
- "\n -b n[k|m] Split by bytes" \
- "\n -l n Split by lines" \
- "\n -a n Use n letters as suffix"
+ "\n -b n[k|m] Split by bytes" \
+ "\n -l n Split by lines" \
+ "\n -a n Use n letters as suffix"
#define split_example_usage \
"$ split TODO foo\n" \
"$ cat TODO | split -a 2 -l 2 TODO_\n"
"\n\nOptions:" \
"\n -S|--start Start" \
"\n -K|--stop Stop" \
- "\n -a|--startas <pathname> Starts process specified by pathname" \
+ "\n -a|--startas pathname Starts process specified by pathname" \
"\n -b|--background Force process into background" \
- "\n -u|--user <username>|<uid> Stop this user's processes" \
- "\n -x|--exec <executable> Program to either start or check" \
+ "\n -u|--user username|uid Stop this user's processes" \
+ "\n -x|--exec executable Program to either start or check" \
"\n -m|--make-pidfile Create the -p file and enter pid in it" \
- "\n -n|--name <process-name> Stop processes with this name" \
- "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
+ "\n -n|--name process-name Stop processes with this name" \
+ "\n -p|--pidfile pid-file Save or load pid using a pid-file" \
"\n -q|--quiet Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -o|--oknodo Exit status 0 if nothing done" \
"\n -v|--verbose Verbose" \
- "\n -N|--nicelevel <N> Add N to process's nice level" \
+ "\n -N|--nicelevel N Add N to process's nice level" \
) \
- "\n -s|--signal <signal> Signal to send (default TERM)" \
- "\n -c|--chuid <user>[:[<group>]] Change to specified user/group"
+ "\n -s|--signal signal Signal to send (default TERM)" \
+ "\n -c|--chuid user[:[group]] Change to specified user/group"
#define stat_trivial_usage \
"[OPTION] FILE..."
)
#define strings_trivial_usage \
- "[-afo] [-n length] [file ... ]"
+ "[-afo] [-n length] [file ...]"
#define strings_full_usage \
"Display printable strings in a binary file" \
"\n\nOptions:" \
"sysctl [-n] variable ...\n" \
"sysctl [-n] -w variable=value ...\n" \
"sysctl [-n] -a\n" \
- "sysctl [-n] -p <file> (default /etc/sysctl.conf)\n" \
+ "sysctl [-n] -p file (default /etc/sysctl.conf)\n" \
"sysctl [-n] -A\n"
#define syslogd_trivial_usage \
USE_FEATURE_IPC_SYSLOG( \
"\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
/* NB: -Csize shouldn't have space (because size is optional) */
-/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
+/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
" -l USER Attempt an automatic login with the USER argument\n" \
" HOST The official name, alias or the IP address of the\n" \
" remote host\n" \
- " PORT The remote port number to connect to. If it is not\n" \
+ " PORT The remote port number to connect to. If it is not\n" \
" specified, the default telnet (23) port is used."
#else
#define telnet_trivial_usage \
#define tcpsvd_trivial_usage \
"[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..."
/* with not-implemented options: */
-/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [ -t sec] ip port prog..." */
+/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */
#define tcpsvd_full_usage \
"Creates TCP socket, binds it to ip:port and listens on it\n" \
"for incoming connections. For each connection it runs prog." \
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
- "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
+ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
"COMMAND's resource usage information is displayed." \
"\n\nOptions:\n" \
" -v Verbose"
"Adjust filesystem options on ext[23] filesystems"
#define udhcpc_trivial_usage \
- "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
+ "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
+ " [-p pidfile] [-r IP] [-s script]"
#define udhcpc_full_usage \
" -V,--vendorclass=CLASSID Set vendor class identifier\n" \
" -i,--interface=INTERFACE Interface to use (default: eth0)\n" \
" -v,--version Display version" \
#define udhcpd_trivial_usage \
- "[configfile]\n" \
+ "[configfile]" \
#define udhcpd_full_usage \
""
#define uname_trivial_usage \
"[OPTION]..."
#define uname_full_usage \
- "Print certain system information. With no OPTION, same as -s." \
+ "Print certain system information. With no OPTION, same as -s." \
"\n\nOptions:\n" \
" -a Print all information\n" \
" -m The machine (hardware) type\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
- "[-c] [-f] [ name ... ]"
+ "[-c] [-f] [name...]"
#define uncompress_full_usage \
"Uncompress .Z file[s]" \
"\n\nOptions:\n" \
#define unix2dos_trivial_usage \
"[option] [FILE]"
#define unix2dos_full_usage \
- "Convert FILE from unix format to dos format. When no option\n" \
+ "Convert FILE from unix format to dos format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
"When no file is given, use stdin/stdout." \
"\n\nOptions:\n" \
"[pauses for 1 second]\n"
#define uudecode_trivial_usage \
- "[FILE]..."
+ "[-o outfile] [infile]"
#define uudecode_full_usage \
- "Uudecode a file" \
- "\n\nOptions:\n" \
- " -o FILE Direct output to FILE"
+ "Uudecode a file\n" \
+ "NB: finds outfile name in uuencoded source unless -o is given"
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
"$ ls -l busybox\n" \
"-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
#define uuencode_trivial_usage \
- "[OPTION] [INFILE] REMOTEFILE"
+ "[-m] [infile] stored_filename"
#define uuencode_full_usage \
- "Uuencode a file" \
+ "Uuencode a file to stdout" \
"\n\nOptions:\n" \
" -m Use base64 encoding per RFC1521"
#define uuencode_example_usage \
#define vlock_trivial_usage \
"[OPTIONS]"
#define vlock_full_usage \
- "Lock a virtual terminal. A password is required to unlock." \
+ "Lock a virtual terminal. A password is required to unlock." \
"\n\nOptions:\n" \
" -a Lock all VTs"
#define watch_trivial_usage \
- "[-n <seconds>] [-t] COMMAND..."
+ "[-n seconds] [-t] COMMAND..."
#define watch_full_usage \
"Execute a program periodically" \
"\n\nOptions:\n" \
"Mon Dec 17 10:31:44 GMT 2000"
#define watchdog_trivial_usage \
- "[-t <seconds>] [-F] DEV"
+ "[-t seconds] [-F] DEV"
#define watchdog_full_usage \
"Periodically write to watchdog device DEV" \
"\n\nOptions:\n" \
"[OPTION]... [FILE]..."
#define wc_full_usage \
"Print line, word, and byte counts for each FILE, and a total line if\n" \
- "more than one FILE is specified. With no FILE, read standard input." \
+ "more than one FILE is specified. With no FILE, read standard input." \
"\n\nOptions:\n" \
" -c Print the byte counts\n" \
" -l Print the newline counts\n" \
projects / oweals / busybox.git / blobdiff