#define NOUSAGE_STR "\b"
#define acpid_trivial_usage \
- "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE...]"
+ "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
#define acpid_full_usage "\n\n" \
"Listen to ACPI events and spawn specific helpers on event arrival\n" \
"\nOptions:" \
"# acpid -d /dev/input/event*\n"
#define addgroup_trivial_usage \
- "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name"
+ "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
#define addgroup_full_usage "\n\n" \
"Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
"\nOptions:" \
"\n -S Create a system group" \
#define adduser_trivial_usage \
- "[OPTIONS] user_name"
+ "[OPTIONS] USER"
#define adduser_full_usage "\n\n" \
"Add a user\n" \
"\nOptions:" \
"\n -u UID User id" \
#define adjtimex_trivial_usage \
- "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
+ "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
#define adjtimex_full_usage "\n\n" \
- "Read and optionally set system timebase parameters. See adjtimex(2).\n" \
+ "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
"\nOptions:" \
- "\n -q Quiet" \
- "\n -o offset Time offset, microseconds" \
- "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \
- "\n (positive values make clock run faster)" \
- "\n -t tick Microseconds per tick, usually 10000" \
- "\n -p timeconstant" \
+ "\n -q Quiet" \
+ "\n -o OFF Time offset, microseconds" \
+ "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
+ "\n (positive values make clock run faster)" \
+ "\n -t TICK Microseconds per tick, usually 10000" \
+ "\n -p TCONST" \
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
"\n -v Verbose" \
#define arp_trivial_usage \
- "\n[-vn] [-H type] [-i if] -a [hostname]" \
- "\n[-v] [-i if] -d hostname [pub]" \
- "\n[-v] [-H type] [-i if] -s hostname hw_addr [temp]" \
- "\n[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub" \
- "\n[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub"
+ "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
+ "\n[-v] [-i IF] -d HOSTNAME [pub]" \
+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
+ "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
#define arp_full_usage "\n\n" \
"Manipulate ARP cache\n" \
"\nOptions:" \
"\n -H HWTYPE Hardware address type" \
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
+ "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
#define arping_full_usage "\n\n" \
"Send ARP requests/replies\n" \
"\nOptions:" \
"\n -U Unsolicited ARP mode, update your neighbors" \
"\n -A ARP answer mode, update your neighbors" \
"\n -c N Stop after sending N ARP requests" \
- "\n -w timeout Time to wait for ARP reply, in seconds" \
- "\n -I dev Interface to use (default eth0)" \
- "\n -s sender Sender IP address" \
- "\n target Target IP address" \
+ "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
+ "\n -I IFACE Interface to use (default eth0)" \
+ "\n -s SRC_IP Sender IP address" \
+ "\n DST_IP Target IP address" \
#define sh_trivial_usage NOUSAGE_STR
#define sh_full_usage ""
"Options:" \
"\n -v VAR=VAL Set variable" \
"\n -F SEP Use SEP as field separator" \
- "\n -f FILE Read program from file" \
+ "\n -f FILE Read program from FILE" \
#define basename_trivial_usage \
"FILE [SUFFIX]"
"bar"
#define beep_trivial_usage \
- "-f freq -l length -d delay -r repetitions -n"
+ "-f FREQ -l LEN -d DELAY -r COUNT -n"
#define beep_full_usage "\n\n" \
"Options:" \
"\n -f Frequency in Hz" \
"\n -r Repetitions" \
"\n -n Start new tone" \
-#define fbsplash_trivial_usage \
- "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
-#define fbsplash_full_usage "\n\n" \
- "Options:" \
- "\n -s Image" \
- "\n -c Hide cursor" \
- "\n -d Framebuffer device (default /dev/fb0)" \
- "\n -i Config file (var=value):" \
- "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
- "\n BAR_R,BAR_G,BAR_B" \
- "\n -f Control pipe (else exit after drawing image)" \
- "\n commands: 'NN' (% for progress bar) or 'exit'" \
+#define bootchartd_trivial_usage \
+ "start [PROG ARGS]|stop|init"
+#define bootchartd_full_usage "\n\n" \
+ "Create /var/log/bootchart.tgz with boot chart data\n" \
+ "\nOptions:" \
+ "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
+ "\nstop: send USR1 to all bootchartd processes" \
+ "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
+ "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
"\n setpathcost BRIDGE COST Set path cost" \
"\n setportprio BRIDGE PRIO Set port priority" \
"\n setbridgeprio BRIDGE PRIO Set bridge priority" \
- "\n stp BRIDGE [1|0] STP on/off" \
+ "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
) \
#define bunzip2_trivial_usage \
- "[OPTIONS] [FILE]"
+ "[OPTIONS] [FILE]..."
#define bunzip2_full_usage "\n\n" \
- "Uncompress FILE (or standard input)\n" \
+ "Uncompress FILEs (or stdin)\n" \
"\nOptions:" \
- "\n -c Write to standard output" \
+ "\n -c Write to stdout" \
"\n -f Force" \
#define bzip2_trivial_usage \
"[OPTIONS] [FILE]..."
#define bzip2_full_usage "\n\n" \
- "Compress FILEs (or standard input) with bzip2 algorithm.\n" \
+ "Compress FILEs (or stdin) with bzip2 algorithm\n" \
"\nOptions:" \
- "\n -c Write to standard output" \
+ "\n -c Write to stdout" \
"\n -d Decompress" \
"\n -f Force" \
"\n -1..-9 Compression level" \
#define lzop_trivial_usage \
"[-cfvd123456789CF] [FILE]..."
#define lzop_full_usage "\n\n" \
- " -c Write to standard output" \
+ " -c Write to stdout" \
"\n -f Force" \
"\n -v Verbose" \
"\n -d Decompress" \
#define unlzop_trivial_usage \
"[-cfvCF] [FILE]..."
#define unlzop_full_usage "\n\n" \
- " -c Write to standard output" \
+ " -c Write to stdout" \
"\n -f Force" \
"\n -v Verbose" \
"\n -F Don't store or verify checksum" \
"Uncompress to stdout"
#define unlzma_trivial_usage \
- "[OPTIONS] [FILE]"
+ "[OPTIONS] [FILE]..."
#define unlzma_full_usage "\n\n" \
- "Uncompress FILE (or standard input)\n" \
+ "Uncompress FILE (or stdin)\n" \
"\nOptions:" \
- "\n -c Write to standard output" \
+ "\n -c Write to stdout" \
"\n -f Force" \
#define lzmacat_trivial_usage \
"Uncompress to stdout"
#define cal_trivial_usage \
- "[-jy] [[month] year]"
+ "[-jy] [[MONTH] YEAR]"
#define cal_full_usage "\n\n" \
"Display a calendar\n" \
"\nOptions:" \
"chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
#define chattr_trivial_usage \
- "[-R] [-+=AacDdijsStTu] [-v version] files..."
+ "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
#define chattr_full_usage "\n\n" \
"Change file attributes on an ext2 fs\n" \
"\nModifiers:" \
"\n t Disable tail-merging of partial blocks with other files" \
"\n u Allow file to be undeleted" \
"\nOptions:" \
- "\n -R Recursively list subdirectories" \
+ "\n -R Recurse" \
"\n -v Set the file's version/generation number" \
#define chcon_trivial_usage \
"\n -c BYTES Limit core file size" \
"\n -v Verbose" \
"\n -P Create new process group" \
- "\n -0 Close standard input" \
- "\n -1 Close standard output" \
- "\n -2 Close standard error" \
+ "\n -0 Close stdin" \
+ "\n -1 Close stdout" \
+ "\n -2 Close stderr" \
#define setuidgid_trivial_usage \
- "account prog args"
+ "USER PROG ARGS"
#define setuidgid_full_usage "\n\n" \
- "Set uid and gid to account's uid and gid, removing all supplementary\n" \
+ "Set uid and gid to USER's uid and gid, removing all supplementary\n" \
"groups and run PROG"
#define envuidgid_trivial_usage \
- "account prog args"
+ "USER PROG ARGS"
#define envuidgid_full_usage "\n\n" \
- "Set $UID to account's uid and $GID to account's gid and run PROG"
+ "Set $UID to USER's uid and $GID to USER's gid and run PROG"
#define envdir_trivial_usage \
- "dir prog args"
+ "DIR PROG ARGS"
#define envdir_full_usage "\n\n" \
"Set various environment variables as specified by files\n" \
"in the directory dir and run PROG"
"\n a SIGXCPU after N seconds" \
#define chroot_trivial_usage \
- "NEWROOT [PROG [ARGS]]"
+ "NEWROOT [PROG ARGS]"
#define chroot_full_usage "\n\n" \
"Run PROG with root directory set to NEWROOT"
#define chroot_example_usage \
"Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]") "]]"
+ "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
#define cmp_full_usage "\n\n" \
- "Compares FILE1 vs stdin if FILE2 is not specified\n" \
+ "Compare FILE1 with FILE2 (or stdin)\n" \
"\nOptions:" \
"\n -l Write the byte numbers (decimal) and values (octal)" \
"\n for all differing bytes" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage "\n\n" \
- "Compare FILE1 to FILE2, or to stdin if - is specified\n" \
+ "Compare FILE1 with FILE2\n" \
"\nOptions:" \
"\n -1 Suppress lines unique to FILE1" \
"\n -2 Suppress lines unique to FILE2" \
"Print the config file which built busybox"
#define chrt_trivial_usage \
- "[OPTIONS] [PRIO] [PID | PROG [ARGS]]"
+ "[OPTIONS] [PRIO] [PID | PROG ARGS]"
#define chrt_full_usage "\n\n" \
"Manipulate real-time attributes of a process\n" \
"\nOptions:" \
- "\n -p Operate on pid" \
- "\n -r Set scheduling policy to SCHED_RR" \
- "\n -f Set scheduling policy to SCHED_FIFO" \
- "\n -o Set scheduling policy to SCHED_OTHER" \
+ "\n -p Operate on PID" \
+ "\n -r Set SCHED_RR scheduling" \
+ "\n -f Set SCHED_FIFO scheduling" \
+ "\n -o Set SCHED_OTHER scheduling" \
"\n -m Show min and max priorities" \
#define chrt_example_usage \
IF_SELINUX( \
"\n -c Preserve security context" \
) \
- "\n -d,-P Preserve links" \
- "\n -H,-L Dereference all symlinks (default)" \
+ "\n -R,-r Recurse" \
+ "\n -d,-P Preserve symlinks (default if -R)" \
+ "\n -L Follow all symlinks" \
+ "\n -H Follow symlinks on command line" \
"\n -p Preserve file attributes if possible" \
"\n -f Force overwrite" \
"\n -i Prompt before overwrite" \
- "\n -R,-r Recurse" \
"\n -l,-s Create (sym)links" \
#define cpio_trivial_usage \
- "-[ti" IF_FEATURE_CPIO_O("o") IF_FEATURE_CPIO_P("p") "dmvu] [-F FILE]" \
- IF_FEATURE_CPIO_O( " [-H newc]" )
+ "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
+ " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
#define cpio_full_usage "\n\n" \
"Extract or list files from a cpio archive" \
- IF_FEATURE_CPIO_O( ", or create a cpio archive" ) \
+ IF_FEATURE_CPIO_O(", or" \
+ "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
+ " using file list on stdin" \
+ ) \
+ "\n" \
"\nMain operation mode:" \
"\n -t List" \
"\n -i Extract" \
IF_FEATURE_CPIO_O( \
- "\n -o Create" \
+ "\n -o Create (requires -H newc)" \
) \
IF_FEATURE_CPIO_P( \
- "\n -p Passthrough" \
+ "\n -p DIR Copy files to DIR" \
) \
"\nOptions:" \
"\n -d Make leading directories" \
"\n -m Preserve mtime" \
"\n -v Verbose" \
"\n -u Overwrite" \
- "\n -F Input file" \
+ "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
IF_FEATURE_CPIO_O( \
- "\n -H Define format" \
+ "\n -H newc Archive format" \
) \
#define crond_trivial_usage \
"Crypt the PASSWORD using crypt(3)\n" \
"\nOptions:" \
IF_LONG_OPTS( \
- "\n -P,--password-fd=NUM Read password from fd NUM" \
+ "\n -P,--password-fd=N Read password from fd N" \
/* "\n -s,--stdin Use stdin; like -P0" */ \
"\n -m,--method=TYPE Encryption method TYPE" \
"\n -S,--salt=SALT" \
) \
IF_NOT_LONG_OPTS( \
- "\n -P NUM Read password from fd NUM" \
+ "\n -P N Read password from fd N" \
/* "\n -s Use stdin; like -P0" */ \
"\n -m TYPE Encryption method TYPE" \
"\n -S SALT" \
"Crypt the PASSWORD using crypt(3)\n" \
"\nOptions:" \
IF_LONG_OPTS( \
- "\n -P,--password-fd=NUM Read password from fd NUM" \
+ "\n -P,--password-fd=N Read password from fd N" \
/* "\n -s,--stdin Use stdin; like -P0" */ \
"\n -m,--method=TYPE Encryption method TYPE" \
"\n -S,--salt=SALT" \
) \
IF_NOT_LONG_OPTS( \
- "\n -P NUM Read password from fd NUM" \
+ "\n -P N Read password from fd N" \
/* "\n -s Use stdin; like -P0" */ \
"\n -m TYPE Encryption method TYPE" \
"\n -S SALT" \
#define cut_trivial_usage \
"[OPTIONS] [FILE]..."
#define cut_full_usage "\n\n" \
- "Print selected fields from each input FILE to standard output\n" \
+ "Print selected fields from each input FILE to stdout\n" \
"\nOptions:" \
"\n -b LIST Output only bytes from LIST" \
"\n -c LIST Output only characters from LIST" \
"p - print top of the stack (without altering the stack),\n" \
"f - print entire stack, o - pop the value and set output radix\n" \
"(value must be 10 or 16).\n" \
- "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \
+ "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \
#define dc_example_usage \
"$ dc 2 2 + p\n" \
"[-Pk" \
IF_FEATURE_HUMAN_READABLE("mh") \
IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
- "] [FILESYSTEM...]"
+ "] [FILESYSTEM]..."
#define df_full_usage "\n\n" \
"Print filesystem usage statistics\n" \
"\nOptions:" \
"/dev/sda3 17381728 17107080 274648 98% /\n"
#define dhcprelay_trivial_usage \
- "CLIENT_IFACE[,CLIENT_IFACE2...] SERVER_IFACE [SERVER_IP]"
+ "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
#define dhcprelay_full_usage "\n\n" \
"Relay DHCP requests between clients and server" \
#define diff_trivial_usage \
- "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
+ "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage "\n\n" \
"Compare files line by line and output the differences between them.\n" \
"This implementation supports unified diffs only.\n" \
"\nOptions:" \
"\n -a Treat all files as text" \
"\n -b Ignore changes in the amount of whitespace" \
+ "\n -B Ignore changes whose lines are all blank" \
"\n -d Try hard to find a smaller set of changes" \
"\n -i Ignore case differences" \
"\n -L Use LABEL instead of the filename in the unified header" \
"\n -N Treat absent files as empty" \
"\n -q Output only whether files differ" \
- "\n -r Recursively compare subdirectories" \
+ "\n -r Recurse" \
"\n -S Start with FILE when comparing directories" \
"\n -T Make tabs line up by prefixing a tab when necessary" \
"\n -s Report when two files are the same" \
"\n -s SIZE Buffer size" \
#define dnsd_trivial_usage \
- "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
+ "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
#define dnsd_full_usage "\n\n" \
"Small static DNS server daemon\n" \
"\nOptions:" \
- "\n -c Config filename" \
- "\n -t TTL in seconds" \
- "\n -p Listening port" \
- "\n -i Listening ip (default all)" \
+ "\n -c FILE Config file" \
+ "\n -t SEC TTL" \
+ "\n -p PORT Listen on PORT" \
+ "\n -i ADDR Listen on ADDR" \
"\n -d Daemonize" \
+ "\n -v Verbose" \
+ "\n -s Send successful replies only. Use this if you want" \
+ "\n to use /etc/resolv.conf with two nameserver lines:" \
+ "\n nameserver DNSD_SERVER" \
+ "\n nameserver NORNAL_DNS_SERVER" \
#define dos2unix_trivial_usage \
"[OPTIONS] [FILE]"
"\n -d unix2dos" \
#define dpkg_trivial_usage \
- "[-ilCPru] [-F option] package_name"
+ "[-ilCPru] [-F OPT] PACKAGE"
#define dpkg_full_usage "\n\n" \
"Install, remove and manage Debian packages\n" \
"\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -i,--install Install the package" \
+ "\n -l,--list List of installed packages" \
+ "\n --configure Configure an unpackaged package" \
+ "\n -P,--purge Purge all files of a package" \
+ "\n -r,--remove Remove all but the configuration files for a package" \
+ "\n --unpack Unpack a package, but don't configure it" \
+ "\n --force-depends Ignore dependency problems" \
+ "\n --force-confnew Overwrite existing config files when installing" \
+ "\n --force-confold Keep old config files when installing" \
+ ) \
+ IF_NOT_LONG_OPTS( \
"\n -i Install the package" \
"\n -l List of installed packages" \
"\n -C Configure an unpackaged package" \
- "\n -F depends Ignore dependency problems" \
"\n -P Purge all files of a package" \
"\n -r Remove all but the configuration files for a package" \
"\n -u Unpack a package, but don't configure it" \
+ "\n -F depends Ignore dependency problems" \
+ "\n -F confnew Overwrite existing config files when installing" \
+ "\n -F confold Keep old config files when installing" \
+ )
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
" bytes.\n" \
"\nOptions:" \
"\n -a Show file sizes too" \
- "\n -H Follow symlinks on command line" \
"\n -L Follow all symlinks" \
+ "\n -H Follow symlinks on command line" \
"\n -d N Limit output to directories (and files with -a) of depth < N" \
"\n -c Show grand total" \
"\n -l Count sizes many times if hard linked" \
#define dumpkmap_trivial_usage \
"> keymap"
#define dumpkmap_full_usage "\n\n" \
- "Print a binary keyboard translation table to standard output"
+ "Print a binary keyboard translation table to stdout"
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
"Display DHCP leases granted by udhcpd\n" \
"\nOptions:" \
IF_LONG_OPTS( \
- "\n -f,--file=FILE Leases file to load" \
- "\n -r,--remaining Interpret lease times as time remaining" \
- "\n -a,--absolute Interpret lease times as expire time" \
+ "\n -f,--file=FILE Lease file" \
+ "\n -r,--remaining Show remaining time" \
+ "\n -a,--absolute Show expiration time" \
) \
IF_NOT_LONG_OPTS( \
- "\n -f FILE Leases file to load" \
- "\n -r Interpret lease times as time remaining" \
- "\n -a Interpret lease times as expire time" \
+ "\n -f FILE Lease file" \
+ "\n -r Show remaining time" \
+ "\n -a Show expiration time" \
)
+/*
#define e2fsck_trivial_usage \
"[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
"[-I inode_buffer_blocks] [-P process_inode_size] " \
"\n -j journal Set location of the external journal" \
"\n -l file Add to badblocks list" \
"\n -L file Set badblocks list" \
+*/
#define echo_trivial_usage \
- IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
+ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
#define echo_full_usage "\n\n" \
"Print the specified ARGs to stdout" \
IF_FEATURE_FANCY_ECHO( "\n" \
"\nOptions:" \
"\n -n Suppress trailing newline" \
- "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
- "\n -E Disable interpretation of backslash-escaped characters" \
+ "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
+ "\n -E Don't interpret backslash escapes (default)" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
#define eject_full_usage "\n\n" \
- "Eject specified DEVICE (or default /dev/cdrom)\n" \
+ "Eject DEVICE or default /dev/cdrom\n" \
"\nOptions:" \
IF_FEATURE_EJECT_SCSI( \
"\n -s SCSI device" \
#define ed_full_usage ""
#define env_trivial_usage \
- "[-iu] [-] [name=value]... [PROG [ARGS]]"
+ "[-iu] [-] [name=value]... [PROG ARGS]"
#define env_full_usage "\n\n" \
"Print the current environment or run PROG after setting up\n" \
"the specified environment\n" \
"\n -p pass Append four or six byte password PW to the packet" \
#define expand_trivial_usage \
- "[-i] [-t NUM] [FILE|-]"
+ "[-i] [-t N] [FILE]..."
#define expand_full_usage "\n\n" \
- "Convert tabs to spaces, writing to standard output\n" \
+ "Convert tabs to spaces, writing to stdout\n" \
"\nOptions:" \
IF_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i,--initial Don't convert tabs after non blanks" \
#define expr_trivial_usage \
"EXPRESSION"
#define expr_full_usage "\n\n" \
- "Print the value of EXPRESSION to standard output\n" \
+ "Print the value of EXPRESSION to stdout\n" \
"\n" \
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
"$ echo $?\n" \
"1\n"
+#define fbsplash_trivial_usage \
+ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
+#define fbsplash_full_usage "\n\n" \
+ "Options:" \
+ "\n -s Image" \
+ "\n -c Hide cursor" \
+ "\n -d Framebuffer device (default /dev/fb0)" \
+ "\n -i Config file (var=value):" \
+ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
+ "\n BAR_R,BAR_G,BAR_B" \
+ "\n -f Control pipe (else exit after drawing image)" \
+ "\n commands: 'NN' (% for progress bar) or 'exit'" \
+
#define fbset_trivial_usage \
"[OPTIONS] [MODE]"
#define fbset_full_usage "\n\n" \
) \
"\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
"\n -C CYLINDERS Set number of cylinders/heads/sectors" \
- "\n -H HEADS\n" \
+ "\n -H HEADS" \
"\n -S SECTORS" \
#define blkid_trivial_usage \
"$ findfs LABEL=MyDevice"
#define find_trivial_usage \
- "[PATH...] [EXPRESSION]"
+ "[PATH]... [EXPRESSION]"
#define find_full_usage "\n\n" \
"Search for files. The default PATH is the current directory,\n" \
"default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:" \
- "\n -follow Dereference symlinks" \
+ "\n -follow Follow symlinks" \
IF_FEATURE_FIND_XDEV( \
"\n -xdev Don't descend directories on other filesystems") \
IF_FEATURE_FIND_MAXDEPTH( \
"\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
IF_FEATURE_FIND_PERM( \
"\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
- "\n or exactly (NNN)") \
+ "\n or exactly NNN") \
IF_FEATURE_FIND_MTIME( \
"\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
- "\n or exactly (N) days") \
+ "\n or exactly N days") \
IF_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
- "\n or exactly (N) minutes") \
+ "\n or exactly N minutes") \
IF_FEATURE_FIND_NEWER( \
"\n -newer FILE Modified time is more recent than FILE's") \
IF_FEATURE_FIND_INUM( \
IF_FEATURE_FIND_DEPTH( \
"\n -depth Process directory name after traversing it") \
IF_FEATURE_FIND_SIZE( \
- "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \
+ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
"\n +/-N: file size is bigger/smaller than N") \
+ IF_FEATURE_FIND_LINKS( \
+ "\n -links N Number of links is greater than (+N), less than (-N)," \
+ "\n or exactly N") \
"\n -print Print (default and assumed)" \
IF_FEATURE_FIND_PRINT0( \
"\n -print0 Delimit output with null characters rather than" \
#define flash_eraseall_full_usage "\n\n" \
"Erase an MTD device\n" \
"\nOptions:" \
- "\n -j format the device for jffs2" \
- "\n -q don't display progress messages"
+ "\n -j Format the device for jffs2" \
+ "\n -q Don't display progress messages" \
+
+#define flashcp_trivial_usage \
+ "-v FILE MTD_DEVICE"
+#define flashcp_full_usage "\n\n" \
+ "Copy an image to MTD device\n" \
+ "\nOptions:" \
+ "\n -v Verbose" \
+
+#define flock_trivial_usage \
+ "[-sxun] FD|{FILE [-c] PROG ARGS}"
+#define flock_full_usage "\n\n" \
+ "[Un]lock file descriptor, or lock FILE and run PROG\n" \
+ "\nOptions:" \
+ "\n -s Shared lock" \
+ "\n -x Exclusive lock (default)" \
+ "\n -u Unlock FD" \
+ "\n -n Fail rather than wait" \
#define fold_trivial_usage \
- "[-bs] [-w WIDTH] [FILE]"
+ "[-bs] [-w WIDTH] [FILE]..."
#define fold_full_usage "\n\n" \
- "Wrap input lines in each FILE (standard input by default), writing to\n" \
- "standard output\n" \
+ "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
"\nOptions:" \
"\n -b Count bytes rather than columns" \
"\n -s Break at spaces" \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
- "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]"
+ "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
#define fsck_full_usage "\n\n" \
"Check and repair filesystems\n" \
"\nOptions:" \
"\n -T Don't show title on startup" \
"\n -V Verbose" \
"\n -C n Write status information to specified filedescriptor" \
- "\n -t type List of filesystem types to check" \
+ "\n -t TYPE List of filesystem types to check" \
#define fsck_minix_trivial_usage \
- "[-larvsmf] /dev/name"
+ "[-larvsmf] BLOCKDEV"
#define fsck_minix_full_usage "\n\n" \
"Check MINIX filesystem\n" \
"\nOptions:" \
"#!/bin/sh\n" \
"GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
" -n 'example.busybox' -- \"$@\"`\n" \
- "if [ $? != 0 ]; then exit 1; fi\n" \
+ "if [ $? != 0 ]; then exit 1; fi\n" \
"eval set -- \"$GETOPT\"\n" \
"while true; do\n" \
" case $1 in\n" \
#define getsebool_trivial_usage \
"-a or getsebool boolean..."
#define getsebool_full_usage "\n\n" \
- " -a Show all SELinux booleans"
+ " -a Show all selinux booleans"
#define getty_trivial_usage \
"[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
"\n -H HOST Log HOST into the utmp file as the hostname" \
#define grep_trivial_usage \
- "[-HhrilLnqvso" \
- IF_DESKTOP("w") \
- "eF" \
+ "[-HhnlLoqvsriw" \
+ "F" \
IF_FEATURE_GREP_EGREP_ALIAS("E") \
- IF_FEATURE_GREP_CONTEXT("ABC") \
IF_EXTRA_COMPAT("z") \
- "] PATTERN [FILE]..."
+ "] [-m N] " \
+ IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
+ "PATTERN/-e PATTERN.../-f FILE [FILE]..."
#define grep_full_usage "\n\n" \
- "Search for PATTERN in each FILE or standard input\n" \
- "\nOptions:" \
- "\n -H Prefix output lines with filename where match was found" \
- "\n -h Suppress the prefixing filename on output" \
- "\n -r Recurse" \
- "\n -i Ignore case distinctions" \
- "\n -l List names of files that match" \
- "\n -L List names of files that don't match" \
- "\n -n Print line number with output lines" \
+ "Search for PATTERN in FILEs (or stdin)\n" \
+ "\nOptions:" \
+ "\n -H Add 'filename:' prefix" \
+ "\n -h Do not add 'filename:' prefix" \
+ "\n -n Add 'line_no:' prefix" \
+ "\n -l Show only names of files that match" \
+ "\n -L Show only names of files that don't match" \
+ "\n -c Show only count of matching lines" \
+ "\n -o Show only the matching part of line" \
"\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
"\n -v Select non-matching lines" \
- "\n -s Suppress file open/read error messages" \
- "\n -c Only print count of matching lines" \
- "\n -o Show only the part of a line that matches PATTERN" \
- "\n -m MAX Match up to MAX times per file" \
- IF_DESKTOP( \
- "\n -w Match whole words only") \
- "\n -F PATTERN is a set of newline-separated strings" \
+ "\n -s Suppress open and read errors" \
+ "\n -r Recurse" \
+ "\n -i Ignore case" \
+ "\n -w Match whole words only" \
+ "\n -F PATTERN is a literal (not regexp)" \
IF_FEATURE_GREP_EGREP_ALIAS( \
- "\n -E PATTERN is an extended regular expression") \
+ "\n -E PATTERN is an extended regexp" \
+ ) \
+ IF_EXTRA_COMPAT( \
+ "\n -z Input is NUL terminated" \
+ ) \
+ "\n -m N Match up to N times per file" \
+ IF_FEATURE_GREP_CONTEXT( \
+ "\n -A N Print N lines of trailing context" \
+ "\n -B N Print N lines of leading context" \
+ "\n -C N Same as '-A N -B N'" \
+ ) \
"\n -e PTRN Pattern to match" \
"\n -f FILE Read pattern from file" \
- IF_FEATURE_GREP_CONTEXT( \
- "\n -A Print NUM lines of trailing context" \
- "\n -B Print NUM lines of leading context" \
- "\n -C Print NUM lines of output context") \
- IF_EXTRA_COMPAT( \
- "\n -z Input is NUL terminated") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
#define gunzip_trivial_usage \
"[OPTIONS] [FILE]..."
#define gunzip_full_usage "\n\n" \
- "Uncompress FILEs (or standard input)\n" \
+ "Uncompress FILEs (or stdin)\n" \
"\nOptions:" \
- "\n -c Write to standard output" \
+ "\n -c Write to stdout" \
"\n -f Force" \
"\n -t Test file integrity" \
#define gzip_trivial_usage \
"[OPTIONS] [FILE]..."
#define gzip_full_usage "\n\n" \
- "Compress FILEs (or standard input)\n" \
+ "Compress FILEs (or stdin)\n" \
"\nOptions:" \
- "\n -c Write to standard output" \
+ "\n -c Write to stdout" \
"\n -d Decompress" \
"\n -f Force" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
- "[-d delay] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
+ "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
#define halt_full_usage "\n\n" \
"Halt the system\n" \
"\nOptions:" \
"\n -T Perform cache read timings" \
"\n -u Get/set unmaskirq flag (0/1)" \
IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- "\n -U Un-register an IDE interface (DANGEROUS)") \
+ "\n -U Unregister an IDE interface (DANGEROUS)") \
"\n -v Defaults; same as -mcudkrag for IDE drives" \
"\n -V Display program version and exit immediately" \
IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
"\n -y Put IDE drive in standby mode" \
"\n -Y Put IDE drive to sleep" \
"\n -Z Disable Seagate auto-powersaving mode" \
- "\n -z Re-read partition table" \
+ "\n -z Reread partition table" \
#define head_trivial_usage \
"[OPTIONS] [FILE]..."
#define head_full_usage "\n\n" \
- "Print first 10 lines of each FILE (or standard input) to standard output.\n" \
- "With more than one FILE, precede each with a header giving the file name.\n" \
+ "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
"\nOptions:" \
- "\n -n NUM Print first NUM lines instead of first 10" \
+ "\n -n N[kbm] Print first N lines" \
IF_FEATURE_FANCY_HEAD( \
- "\n -c NUM Output the first NUM bytes" \
- "\n -q Never output headers giving file names" \
- "\n -v Always output headers giving file names") \
+ "\n -c N[kbm] Print first N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ ) \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
+#define tail_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define tail_full_usage "\n\n" \
+ "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
+ "\nOptions:" \
+ "\n -f Print data as file grows" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -s SECONDS Wait SECONDS between reads with -f" \
+ ) \
+ "\n -n N[kbm] Print last N lines" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -c N[kbm] Print last N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
+ "\nIf N starts with a '+', output begins with the Nth item from the start" \
+ "\nof each file, not from the end." \
+ ) \
+
+#define tail_example_usage \
+ "$ tail -n 1 /etc/resolv.conf\n" \
+ "nameserver 10.0.0.1\n"
+
#define hexdump_trivial_usage \
- "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
+ "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
#define hexdump_full_usage "\n\n" \
- "Display FILEs or standard input in a user specified format\n" \
+ "Display FILEs (or stdin) in a user specified format\n" \
"\nOptions:" \
"\n -b One-byte octal display" \
"\n -c One-byte character display" \
"\n -i Inetd mode" \
"\n -f Don't daemonize" \
"\n -v[v] Verbose" \
- "\n -c FILE Configuration file (default httpd.conf)" \
"\n -p [IP:]PORT Bind to ip:port (default *:80)" \
IF_FEATURE_HTTPD_SETUID( \
"\n -u USER[:GRP] Set uid/gid after binding to port") \
IF_FEATURE_HTTPD_BASIC_AUTH( \
"\n -r REALM Authentication Realm for Basic Authentication") \
"\n -h HOME Home directory (default .)" \
+ "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
IF_FEATURE_HTTPD_AUTH_MD5( \
"\n -m STRING MD5 crypt STRING") \
"\n -e STRING HTML encode STRING" \
" [up|down] ..."
#define ifenslave_trivial_usage \
- "[-cdf] master-iface <slave-iface...>"
+ "[-cdf] MASTER_IFACE SLAVE_IFACE..."
#define ifenslave_full_usage "\n\n" \
"Configure network interfaces for parallel routing\n" \
"\nOptions:" \
"\n -i IFACE Interface" \
"\n -f/-F Treat link detection error as link down/link up" \
"\n (otherwise exit on error)" \
- "\n -a Don't up interface automatically" \
+ "\n -a Don't up interface at each link probe" \
"\n -M Monitor creation/destruction of interface" \
"\n (otherwise it must exist)" \
"\n -r PROG Script to run" \
"\n -t SECS Poll time in seconds" \
"\n -u SECS Delay before running script after link up" \
"\n -d SECS Delay after link down" \
- "\n -m MODE API mode (mii, priv, ethtool, wlan, auto)" \
+ "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
"\n -k Kill running daemon" \
#define ifup_trivial_usage \
- "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
#define ifup_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
" ::shutdown:/sbin/swapoff -a\n"
#define inotifyd_trivial_usage \
- "PROG FILE1[:MASK] ..."
+ "PROG FILE1[:MASK]..."
#define inotifyd_full_usage "\n\n" \
"Run PROG on filesystem changes." \
"\nWhen a filesystem event matching MASK occurs on FILEn," \
- "\nPROG <actual_event(s)> <FILEn> [<subfile_name>] is run." \
+ "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
"\nEvents:" \
"\n a File is accessed" \
"\n c File is modified" \
"\n d Subfile is deleted" \
"\n" \
"\ninotifyd waits for PROG to exit." \
- "\nWhen x event happens for all FILEs, inotifyd exits" \
+ "\nWhen x event happens for all FILEs, inotifyd exits." \
/* 2.6 style insmod has no options and required filename
* (not module name - .ko can't be omitted) */
/* -v, -b, -c are ignored */
#define install_trivial_usage \
- "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory"
+ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
#define install_full_usage "\n\n" \
"Copy files and set attributes\n" \
"\nOptions:" \
"$ kill 252\n"
#define killall_trivial_usage \
- "[-l] [-q] [-SIG] process-name..."
+ "[-l] [-q] [-SIG] PROCESS_NAME..."
#define killall_full_usage "\n\n" \
"Send a signal (default: TERM) to given processes\n" \
"\nOptions:" \
#define less_trivial_usage \
"[-EMNmh~I?] [FILE]..."
#define less_full_usage "\n\n" \
- "View a file or list of files. The position within files can be\n" \
- "changed, and files can be manipulated in various ways.\n" \
+ "View FILE (or stdin) one screenful at a time\n" \
"\nOptions:" \
"\n -E Quit once the end of a file is reached" \
"\n -M,-m Display status line with line numbers" \
#define linuxrc_full_usage ""
#define setarch_trivial_usage \
- "personality program [args...]"
+ "personality PROG ARGS"
#define setarch_full_usage "\n\n" \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
" linux64 Set 64bit uname emulation" \
#define ln_trivial_usage \
- "[OPTIONS] TARGET... LINK|DIRECTORY"
+ "[OPTIONS] TARGET... LINK|DIR"
#define ln_full_usage "\n\n" \
- "Create a link LINK or DIRECTORY/TARGET to the specified TARGET(s)\n" \
+ "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
"\nOptions:" \
"\n -s Make symlinks instead of hardlinks" \
- "\n -f Remove existing destination files" \
+ "\n -f Remove existing destinations" \
"\n -n Don't dereference symlinks - treat like normal file" \
"\n -b Make a backup of the target (if exists) before link operation" \
"\n -S suf Use suffix instead of ~ when making backup files" \
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage "\n\n" \
- "Load a console font from standard input" \
+ "Load a console font from stdin" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadfont_example_usage \
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage "\n\n" \
- "Load a binary keyboard translation table from standard input\n" \
+ "Load a binary keyboard translation table from stdin\n" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadkmap_example_usage \
#define logger_trivial_usage \
"[OPTIONS] [MESSAGE]"
#define logger_full_usage "\n\n" \
- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \
+ "Write MESSAGE (or stdin) to syslog\n" \
"\nOptions:" \
"\n -s Log to stderr as well as the system log" \
"\n -t TAG Log using the specified tag (defaults to user name)" \
"\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
#define lpq_trivial_usage \
- "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]"
+ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
#define lpq_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)" \
IF_FEATURE_LS_FOLLOWLINKS( \
"\n -L List entries pointed to by symlinks") \
IF_FEATURE_LS_RECURSIVE( \
- "\n -R List subdirectories recursively") \
+ "\n -R Recurse") \
IF_FEATURE_LS_SORTFILES( \
"\n -r Sort in reverse order") \
IF_FEATURE_LS_SORTFILES( \
"\n -S Sort by file size") \
"\n -s List the size of each file, in blocks" \
IF_FEATURE_AUTOWIDTH( \
- "\n -T NUM Assume tabstop every NUM columns") \
+ "\n -T N Assume tabstop every N columns") \
IF_FEATURE_LS_TIMESTAMPS( \
"\n -t With -l: sort by modification time") \
IF_FEATURE_LS_TIMESTAMPS( \
IF_FEATURE_LS_SORTFILES( \
"\n -v Sort by version") \
IF_FEATURE_AUTOWIDTH( \
- "\n -w NUM Assume the terminal is NUM columns wide") \
+ "\n -w N Assume the terminal is N columns wide") \
"\n -x List by lines" \
IF_FEATURE_LS_SORTFILES( \
"\n -X Sort by extension") \
#define lsattr_full_usage "\n\n" \
"List file attributes on an ext2 fs\n" \
"\nOptions:" \
- "\n -R Recursively list subdirectories" \
+ "\n -R Recurse" \
"\n -a Don't hide entries starting with ." \
"\n -d List directory entries instead of contents" \
"\n -l List long flag names" \
#define lsmod_full_usage "\n\n" \
"List the currently loaded kernel modules"
+#define lspci_trivial_usage \
+ "[-mk]"
+#define lspci_full_usage "\n\n" \
+ "List all PCI devices" \
+ "\n" \
+ "\n -m Parseable output" \
+ "\n -k Show driver" \
+
+#define lsusb_trivial_usage NOUSAGE_STR
+#define lsusb_full_usage ""
+
#if ENABLE_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
" -s Scan /sys and populate /dev during system boot\n" \
"\n" \
"It can be run by kernel as a hotplug helper. To activate it:\n" \
- " echo /bin/mdev >/proc/sys/kernel/hotplug\n" \
+ " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
IF_FEATURE_MDEV_CONF( \
"It uses /etc/mdev.conf with lines\n" \
"[-]DEVNAME UID:GID PERM" \
"[-L LABEL] " \
/* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
"BLOCKDEV [KBYTES]"
-#define mkfs_ext2_full_usage "\n" \
- "\n -b BLK_SIZE Block size, bytes" \
+#define mkfs_ext2_full_usage "\n\n" \
+ " -b BLK_SIZE Block size, bytes" \
/* "\n -c Check device for bad blocks" */ \
/* "\n -E opts Set extended options" */ \
/* "\n -f size Fragment size in bytes" */ \
"\n -F Force" \
-/* "\n -g num Number of blocks in a block group" */ \
+/* "\n -g N Number of blocks in a block group" */ \
"\n -i RATIO Max number of files is filesystem_size / RATIO" \
"\n -I BYTES Inode size (min 128)" \
/* "\n -j Create a journal (ext3)" */ \
"\n -m PERCENT Percent of blocks to reserve for admin" \
/* "\n -M dir Set last mounted directory" */ \
"\n -n Dry run" \
-/* "\n -N num Number of inodes to create" */ \
+/* "\n -N N Number of inodes to create" */ \
/* "\n -o os Set the 'creator os' field" */ \
/* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
/* "\n -q Quiet" */ \
/* "\n -v Verbose" */ \
#define mkfs_minix_trivial_usage \
- "[-c | -l filename] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
+ "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
#define mkfs_minix_full_usage "\n\n" \
"Make a MINIX filesystem\n" \
"\nOptions:" \
"\n -c Check device for bad blocks" \
"\n -n [14|30] Maximum length of filenames" \
"\n -i INODES Number of inodes for the filesystem" \
- "\n -l FILENAME Read bad blocks list from FILENAME" \
+ "\n -l FILE Read bad blocks list from FILE" \
"\n -v Make version 2 filesystem" \
+#define mkfs_reiser_trivial_usage \
+ "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
+
+#define mkfs_reiser_full_usage "\n\n" \
+ "Make a ReiserFS V3 filesystem\n" \
+ "\nOptions:" \
+ "\n -f Force" \
+ "\n -l LBL Volume label" \
+
#define mkfs_vfat_trivial_usage \
"[-v] [-n LABEL] BLOCKDEV [KBYTES]"
/* Accepted but ignored:
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
- "DEVICE"
+ "[OPTIONS] BLOCKDEV [KBYTES]"
#define mkswap_full_usage "\n\n" \
- "Prepare block device to be used as swap partition"
-#if 0
- "[-c] [-v0|-v1] DEVICE [BLOCKS]"
- "\nOptions:"
- "\n -c Check for readability"
- "\n -v0 Make swap version 0 (max 128M)"
- "\n -v1 Make swap version 1 (default for kernels > 2.1.117)"
- "\n BLOCKS Number of blocks to use (default is entire partition)"
-#endif
+ "Prepare BLOCKDEV to be used as swap partition\n" \
+ "\nOptions:" \
+ "\n -L LBL Label" \
#define mktemp_trivial_usage \
"[-dt] [-p DIR] [TEMPLATE]"
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
- IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value...]") \
+ IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value]...") \
IF_NOT_MODPROBE_SMALL("[-" \
IF_FEATURE_2_4_MODULES("k")"nqrsv" \
- IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value...]")
+ IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value]...")
#define modprobe_full_usage "\n\n" \
"Options:" \
IF_MODPROBE_SMALL( \
#define more_trivial_usage \
"[FILE]..."
#define more_full_usage "\n\n" \
- "View FILE or standard input one screenful at a time"
+ "View FILE (or stdin) one screenful at a time"
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
- "[flags] DEVICE NODE [-o OPT,OPT]"
+ "[OPTIONS] [-o OPTS] DEVICE NODE"
#define mount_full_usage "\n\n" \
"Mount a filesystem. Filesystem autodetection requires /proc.\n" \
"\nOptions:" \
"\n [r]slave Convert [recursively] to a slave subtree" \
"\n [r]private Convert [recursively] to a private subtree" \
"\n [un]bindable Make mount point [un]able to be bind mounted" \
- "\n bind Bind a directory to an additional location" \
+ "\n bind Bind a file or directory to another location" \
"\n move Relocate an existing mount point" \
) \
- "\n remount Remount a mounted filesystem, changing its flags" \
- "\n ro/rw Read-only/read-write mount" \
+ "\n remount Remount a mounted filesystem, changing flags" \
+ "\n ro/rw Same as -r/-w" \
"\n" \
- "\nThere are EVEN MORE flags that are specific to each filesystem" \
- "\nYou'll have to see the written documentation for those filesystems" \
+ "\nThere are filesystem-specific -o flags." \
#define mount_example_usage \
"$ mount\n" \
)
#define nice_trivial_usage \
- "[-n ADJUST] [PROG [ARGS]]"
+ "[-n ADJUST] [PROG ARGS]"
#define nice_full_usage "\n\n" \
"Run PROG with modified scheduling priority\n" \
"\nOptions:" \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
- "PROG [ARGS]"
+ "PROG ARGS"
#define nohup_full_usage "\n\n" \
"Run PROG immune to hangups, with output to a non-tty"
#define nohup_example_usage \
"Name: debian\n" \
"Address: 127.0.0.1\n"
+#define ntpd_trivial_usage \
+ "[-dnqwl] [-S PROG] [-p PEER]..."
+#define ntpd_full_usage "\n\n" \
+ "NTP client/server\n" \
+ "\nOptions:" \
+ "\n -d Verbose" \
+ "\n -n Do not daemonize" \
+ "\n -q Quit after clock is set" \
+/* -N exists for mostly compat reasons, thus not essential to inform */ \
+/* the user that it exists: user may use nice as well */ \
+/* "\n -N Run at high priority" */ \
+ "\n -w Do not set time (only query peers), implies -n" \
+ "\n -l Run as server on port 123" \
+ "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
+ "\n -p PEER Obtain time from PEER (may be repeated)" \
+
#define od_trivial_usage \
"[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
#define od_full_usage "\n\n" \
"Write an unambiguous representation, octal bytes by default, of FILE\n" \
- "(or standard input) to standard output."
+ "(or stdin) to stdout"
#define openvt_trivial_usage \
- "[-c N] [-sw] [PROG [ARGS]]"
+ "[-c N] [-sw] [PROG ARGS]"
#define openvt_full_usage "\n\n" \
"Start PROG on a new virtual terminal\n" \
"\nOptions:" \
#define openvt_example_usage \
"openvt 2 /bin/ash\n"
+/*
#define parse_trivial_usage \
- "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
-#define parse_full_usage "\n\n" \
- "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
+ "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
+#define parse_full_usage ""
+*/
#define passwd_trivial_usage \
"[OPTIONS] [USER]"
"Change USER's password. If no USER is specified,\n" \
"changes the password for the current user.\n" \
"\nOptions:" \
- "\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \
+ "\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
"\n -d Delete password for the account" \
"\n -l Lock (disable) account" \
"\n -u Unlock (re-enable) account" \
"[OPTIONS] [ORIGFILE [PATCHFILE]]"
#define patch_full_usage "\n\n" \
IF_LONG_OPTS( \
- " -p,--strip NUM Strip NUM leading components from file names" \
+ " -p,--strip N Strip N leading components from file names" \
"\n -i,--input DIFF Read DIFF instead of stdin" \
"\n -R,--reverse Reverse patch" \
"\n -N,--forward Ignore already applied patches" \
"\n --dry-run Don't actually change files" \
) \
IF_NOT_LONG_OPTS( \
- " -p NUM Strip NUM leading components from file names" \
+ " -p N Strip N leading components from file names" \
"\n -i DIFF Read DIFF instead of stdin" \
"\n -R Reverse patch" \
"\n -N Ignore already applied patches" \
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define pidof_trivial_usage \
- "[OPTIONS] [NAME...]"
+ "[OPTIONS] [NAME]..."
#define USAGE_PIDOF "\n\nOptions:"
#else
#define pidof_trivial_usage \
- "[NAME...]"
+ "[NAME]..."
#define USAGE_PIDOF /* none */
#endif
#define pidof_full_usage "\n\n" \
#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
- "\n -4, -6 Force IPv4 or IPv6 hostname resolution" \
+ "\n -4, -6 Force IP or IPv6 name resolution" \
"\n -c CNT Send only CNT pings" \
"\n -s SIZE Send SIZE data bytes in packets (default:56)" \
"\n -I IFACE/IP Use interface or IP address as source" \
"\n -P Match parent process ID" \
#define popmaildir_trivial_usage \
- "[OPTIONS] Maildir [connection-helper ...]"
+ "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
#define popmaildir_full_usage "\n\n" \
"Fetch content of remote mailbox to local maildir\n" \
"\nOptions:" \
- "\n -b Binary mode. Ignored" \
- "\n -d Debug. Ignored" \
- "\n -m Show used memory. Ignored" \
- "\n -V Show version. Ignored" \
- "\n -c Use tcpclient. Ignored" \
- "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" \
+/* "\n -b Binary mode. Ignored" */ \
+/* "\n -d Debug. Ignored" */ \
+/* "\n -m Show used memory. Ignored" */ \
+/* "\n -V Show version. Ignored" */ \
+/* "\n -c Use tcpclient. Ignored" */ \
+/* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
"\n -s Skip authorization" \
- "\n -T Get messages with TOP instead with RETR" \
+ "\n -T Get messages with TOP instead of RETR" \
"\n -k Keep retrieved messages on the server" \
- "\n -t timeout Network timeout" \
+ "\n -t SEC Network timeout" \
IF_FEATURE_POPMAILDIR_DELIVERY( \
- "\n -F \"program arg1 arg2 ...\" Filter by program. May be multiple" \
- "\n -M \"program arg1 arg2 ...\" Deliver by program" \
+ "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
+ "\n -M \"PROG ARGS\" Delivery program" \
) \
- "\n -R size Remove old messages on the server >= size (in bytes). Ignored" \
- "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" \
- "\n -L size Don't retrieve new messages >= size (in bytes). Ignored" \
- "\n -H lines Type specified number of lines of a message. Ignored"
+ "\n" \
+ "\nFetch from plain POP3 server:" \
+ "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
+ "\nFetch from SSLed POP3 server and delete fetched emails:" \
+ "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
+/* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
+/* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
+/* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
+/* "\n -H LINES Type first LINES of a message. Ignored" */
#define popmaildir_example_usage \
"$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
"$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
#define poweroff_trivial_usage \
- "[-d delay] [-n] [-f]"
+ "[-d DELAY] [-n] [-f]"
#define poweroff_full_usage "\n\n" \
"Halt and shut off power\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
- "\n -n No call to sync()" \
+ "\n -n Do not sync" \
"\n -f Force power off (don't go through init)" \
#define printenv_trivial_usage \
- "[VARIABLE...]"
+ "[VARIABLE]..."
#define printenv_full_usage "\n\n" \
- "Print all or part of environment.\n" \
- "If no environment VARIABLE specified, print them all."
+ "Print environment VARIABLEs.\n" \
+ "If no VARIABLE specified, print all."
#define printf_trivial_usage \
- "FORMAT [ARGUMENT...]"
+ "FORMAT [ARGUMENT]..."
#define printf_full_usage "\n\n" \
"Format and print ARGUMENT(s) according to FORMAT,\n" \
"where FORMAT controls the output exactly as in C printf"
"Report process status\n" \
USAGE_PS \
IF_SELINUX( \
- "\n -Z Show SE Linux context" \
+ "\n -Z Show selinux context" \
) \
IF_FEATURE_PS_WIDE( \
"\n w Wide output" \
"Options:" \
"\n -m mapfile (Default: /boot/System.map)" \
"\n -p profile (Default: /proc/profile)" \
- "\n -M mult Set the profiling multiplier to mult" \
+ "\n -M NUM Set the profiling multiplier to NUM" \
"\n -i Print only info about the sampling step" \
"\n -v Verbose" \
"\n -a Print all symbols, even if count is 0" \
"\n -n Disable byte order auto-detection" \
#define realpath_trivial_usage \
- "pathname..."
+ "FILE..."
#define realpath_full_usage "\n\n" \
- "Return the absolute pathnames of given argument"
+ "Return the absolute pathnames of given FILE"
#define reboot_trivial_usage \
- "[-d delay] [-n] [-f]"
+ "[-d DELAY] [-n] [-f]"
#define reboot_full_usage "\n\n" \
"Reboot the system\n" \
"\nOptions:" \
#define reformime_full_usage "\n\n" \
"Parse MIME-encoded message\n" \
"\nOptions:" \
- "\n -x prefix Extract content of MIME sections to files" \
- "\n -X prog [args] Filter content of MIME sections through prog." \
+ "\n -x PREFIX Extract content of MIME sections to files" \
+ "\n -X PROG ARGS Filter content of MIME sections through PROG" \
"\n Must be the last option" \
"\n" \
- "\nOther options are silently ignored." \
+ "\nOther options are silently ignored" \
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
"Resize the screen"
#define restorecon_trivial_usage \
- "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
+ "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
#define restorecon_full_usage "\n\n" \
"Reset security contexts of files in pathname\n" \
- "\n -i Ignore files that don't exist" \
- "\n -f file File with list of files to process. Use - for stdin" \
- "\n -e directory Directory to exclude" \
- "\n -R,-r Recurse" \
- "\n -n Don't change any file labels" \
- "\n -o file Save list of files with incorrect context" \
- "\n -v Verbose" \
- "\n -vv Show changed labels" \
- "\n -F Force reset of context to match file_context" \
- "\n for customizable files, or the user section," \
- "\n if it has changed" \
+ "\n -i Ignore files that don't exist" \
+ "\n -f FILE File with list of files to process" \
+ "\n -e DIR Directory to exclude" \
+ "\n -R,-r Recurse" \
+ "\n -n Don't change any file labels" \
+ "\n -o FILE Save list of files with incorrect context" \
+ "\n -v Verbose" \
+ "\n -vv Show changed labels" \
+ "\n -F Force reset of context to match file_context" \
+ "\n for customizable files, or the user section," \
+ "\n if it has changed" \
+
+#define rfkill_trivial_usage \
+ "COMMAND [INDEX|TYPE]"
+#define rfkill_full_usage "\n\n" \
+ "Enable/disable wireless devices\n" \
+ "\nCommands:" \
+ "\n list [INDEX|TYPE] List current state" \
+ "\n block INDEX|TYPE Disable device" \
+ "\n unblock INDEX|TYPE Enable device" \
+ "\n" \
+ "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
+ "\n wimax, wwan, gps, fm" \
#define rm_trivial_usage \
"[OPTIONS] FILE..."
"\nOptions:" \
"\n -i Always prompt before removing" \
"\n -f Never prompt" \
- "\n -r,-R Remove directories recursively" \
+ "\n -R,-r Recurse" \
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
"[OPTIONS] DIRECTORY..."
#define rmdir_full_usage "\n\n" \
- "Remove the DIRECTORY, if it is empty\n" \
+ "Remove DIRECTORY if it is empty\n" \
"\nOptions:" \
IF_FEATURE_RMDIR_LONG_OPTIONS( \
"\n -p|--parents Include parents" \
"\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
#define rpm_trivial_usage \
- "-i -q[ildc]p package.rpm"
+ "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
#define rpm_full_usage "\n\n" \
"Manipulate RPM packages\n" \
- "\nOptions:" \
+ "\nCommands:" \
"\n -i Install package" \
- "\n -q Query package" \
- "\n -p Query uninstalled package" \
+ "\n -qp Query package" \
+ "\nOptions:" \
"\n -i Show information" \
"\n -l List contents" \
"\n -d List documents" \
)
#define runcon_trivial_usage \
- "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG [ARGS]\n" \
- " runcon CONTEXT PROG [ARGS]"
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
+ "runcon CONTEXT PROG ARGS"
#define runcon_full_usage "\n\n" \
"Run PROG in a different security context\n" \
"\n CONTEXT Complete security context\n" \
#define run_parts_trivial_usage \
"[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage "\n\n" \
- "Run a bunch of scripts in a directory\n" \
+ "Run a bunch of scripts in DIRECTORY\n" \
"\nOptions:" \
"\n -t Print what would be run, but don't actually run anything" \
"\n -a ARG Pass ARG as argument for every program" \
"+ shutdown -h +4m"
#define runlevel_trivial_usage \
- "[utmp]"
+ "[FILE]"
#define runlevel_full_usage "\n\n" \
"Find the current and previous system runlevel\n" \
"\n" \
- "If no utmp file exists or if no runlevel record can be found,\n" \
+ "If no utmp FILE exists or if no runlevel record can be found,\n" \
"print \"unknown\""
#define runlevel_example_usage \
"$ runlevel /var/run/utmp\n" \
"N 2"
#define runsv_trivial_usage \
- "dir"
+ "DIR"
#define runsv_full_usage "\n\n" \
"Start and monitor a service and optionally an appendant log service"
#define runsvdir_trivial_usage \
- "[-P] [-s SCRIPT] dir"
+ "[-P] [-s SCRIPT] DIR"
#define runsvdir_full_usage "\n\n" \
"Start a runsv process for each subdirectory. If it exits, restart it.\n" \
"\n -P Put each runsv in a new session" \
#define script_full_usage "\n\n" \
"Options:" \
"\n -a Append output" \
- "\n -c Run PROG, not shell" \
+ "\n -c PROG Run PROG, not shell" \
"\n -f Flush output after each write" \
"\n -q Quiet" \
IF_SCRIPTREPLAY( \
"[-w] [-s SEP] [FIRST [INC]] LAST"
#define seq_full_usage "\n\n" \
"Print numbers from FIRST to LAST, in steps of INC.\n" \
- "FIRST, INC default to 1\n" \
+ "FIRST, INC default to 1.\n" \
"\nOptions:" \
"\n -w Pad to last with leading zeros" \
"\n -s SEP String separator" \
#define setenforce_full_usage ""
#define setfiles_trivial_usage \
- "[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \
+ "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
IF_FEATURE_SETFILES_CHECK_OPTION( \
" [-c policyfile] spec_file" \
) \
#define setfiles_full_usage "\n\n" \
"Reset file contexts under pathname according to spec_file\n" \
IF_FEATURE_SETFILES_CHECK_OPTION( \
- "\n -c file Check the validity of the contexts against the specified binary policy" \
+ "\n -c FILE Check the validity of the contexts against the specified binary policy" \
) \
"\n -d Show which specification matched each file" \
"\n -l Log changes in file labels to syslog" \
"\n -n Don't change any file labels" \
"\n -q Suppress warnings" \
- "\n -r dir Use an alternate root path" \
- "\n -e dir Exclude directory" \
+ "\n -r DIR Use an alternate root path" \
+ "\n -e DIR Exclude DIR" \
"\n -F Force reset of context to match file_context for customizable files" \
- "\n -o file Save list of files with incorrect context" \
- "\n -s Take a list of files from standard input (instead of command line)" \
+ "\n -o FILE Save list of files with incorrect context" \
+ "\n -s Take a list of files from stdin (instead of command line)" \
"\n -v Show changes in file labels, if type or role are changing" \
"\n -vv Show changes in file labels, if type, role, or user are changing" \
"\n -W Display warnings about entries that had no matching files" \
"Set entries into the kernel's scancode-to-keycode map,\n" \
"allowing unusual keyboards to generate usable keycodes.\n\n" \
"SCANCODE may be either xx or e0xx (hexadecimal),\n" \
- "and KEYCODE is given in decimal" \
+ "and KEYCODE is given in decimal." \
#define setkeycodes_example_usage \
"$ setkeycodes e030 127\n"
"Change boolean setting"
#define setsid_trivial_usage \
- "PROG [ARG...]"
+ "PROG ARGS"
#define setsid_full_usage "\n\n" \
"Run PROG in a new session. PROG will have no controlling terminal\n" \
"and will not be affected by keyboard signals (Ctrl-C etc).\n" \
"See setsid(2) for details." \
#define last_trivial_usage \
- ""IF_FEATURE_LAST_FANCY("[-HW] [-f file]")
+ ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
#define last_full_usage "\n\n" \
"Show listing of the last users that logged into the system" \
IF_FEATURE_LAST_FANCY( "\n" \
"\nOptions:" \
/* "\n -H Show header line" */ \
"\n -W Display with no host column truncation" \
- "\n -f file Read from file instead of /var/log/wtmp" \
+ "\n -f FILE Read from FILE instead of /var/log/wtmp" \
)
#define showkey_trivial_usage \
"$ cat TODO | split -a 2 -l 2 TODO_\n"
#define start_stop_daemon_trivial_usage \
- "[OPTIONS] [-S|-K] ... [-- arguments...]"
+ "[OPTIONS] [-S|-K] ... [-- ARGS...]"
#define start_stop_daemon_full_usage "\n\n" \
"Search for matching processes, and then\n" \
"-K: stop all matching processes.\n" \
"\n -c fmt Use the specified format" \
) \
"\n -f Display filesystem status" \
- "\n -L Dereference links" \
+ "\n -L Follow links" \
"\n -t Display info in terse form" \
IF_SELINUX( \
"\n -Z Print security context" \
" %h Number of hard links\n" \
" %i Inode number\n" \
" %n File name\n" \
- " %N Quoted file name with dereference if symlink\n" \
+ " %N File name, with -> TARGET if symlink\n" \
" %o I/O block size\n" \
" %s Total size, in bytes\n" \
" %t Major device type in hex\n" \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
IF_SELINUX( \
- " %C Security context in SELinux\n" \
+ " %C Security context in selinux\n" \
) \
" %i File System ID in hex\n" \
" %l Maximum length of filenames\n" \
"\n [SETTING] See manpage" \
#define su_trivial_usage \
- "[OPTIONS] [-] [username]"
+ "[OPTIONS] [-] [USERNAME]"
#define su_full_usage "\n\n" \
"Change user id or become root\n" \
"\nOptions:" \
- "\n -p, -m Preserve environment" \
+ "\n -p,-m Preserve environment" \
"\n -c CMD Command to pass to 'sh -c'" \
"\n -s SH Shell to use instead of default shell" \
#define sulogin_trivial_usage \
- "[OPTIONS] [TTY]"
+ "[-t N] [TTY]"
#define sulogin_full_usage "\n\n" \
"Single user login\n" \
"\nOptions:" \
"\n -s Use System V sum algorithm (512byte blocks)" \
#define sv_trivial_usage \
- "[-v] [-w sec] command service..."
+ "[-v] [-w SEC] CMD SERVICE_DIR..."
#define sv_full_usage "\n\n" \
"Control services monitored by runsv supervisor.\n" \
"Commands (only first character is enough):\n" \
"STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
#define svlogd_trivial_usage \
- "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
+ "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
#define svlogd_full_usage "\n\n" \
- "Continuously read log data from standard input, optionally\n" \
+ "Continuously read log data from stdin, optionally\n" \
"filter log messages, and write the data to one or more automatically\n" \
"rotated logs" \
"\n -a Stop swapping on all swap devices" \
#define swapon_trivial_usage \
- "[-a]" IF_FEATURE_SWAPON_PRI(" [-p pri]") " [DEVICE]"
+ "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
#define swapon_full_usage "\n\n" \
"Start swapping on DEVICE\n" \
"\nOptions:" \
"\n -a Start swapping on all swap devices" \
IF_FEATURE_SWAPON_PRI( \
- "\n -p pri Set swap device priority" \
+ "\n -p PRI Set swap device priority" \
) \
#define switch_root_trivial_usage \
#define fsync_trivial_usage \
"[OPTIONS] FILE..."
-#define fsync_full_usage \
+#define fsync_full_usage "\n\n" \
"Write files' buffered blocks to disk\n" \
"\nOptions:" \
"\n -d Avoid syncing metadata"
"[OPTIONS]"
#define syslogd_full_usage "\n\n" \
"System logging utility.\n" \
- "Note that this version of syslogd ignores /etc/syslog.conf.\n" \
+ "This version of syslogd ignores /etc/syslog.conf\n" \
"\nOptions:" \
"\n -n Run in foreground" \
"\n -O FILE Log to given file (default:/var/log/messages)" \
- "\n -l n Set local log level" \
+ "\n -l N Set local log level" \
"\n -S Smaller logging output" \
IF_FEATURE_ROTATE_LOGFILE( \
"\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
- "\n -b NUM Number of rotated logs to keep (default:1, max=99, 0=purge)") \
+ "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
IF_FEATURE_REMOTE_LOG( \
"\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
"\n -L Log locally and via network (default is network only if -R)") \
#define tac_full_usage "\n\n" \
"Concatenate FILEs and print them in reverse"
-#define tail_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define tail_full_usage "\n\n" \
- "Print last 10 lines of each FILE (or standard input) to standard output.\n" \
- "With more than one FILE, precede each with a header giving the file name.\n" \
- "\nOptions:" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -c N[kbm] Output last N bytes") \
- "\n -n N[kbm] Print last N lines instead of last 10" \
- "\n -f Output data as the file grows" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -q Never output headers giving file names" \
- "\n -s SEC Wait SEC seconds between reads with -f" \
- "\n -v Always output headers giving file names" \
- "\n" \
- "\nIf the first character of N (bytes or lines) is a '+', output begins with" \
- "\nthe Nth item from the start of each file, otherwise, print the last N items" \
- "\nin the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
-
-#define tail_example_usage \
- "$ tail -n 1 /etc/resolv.conf\n" \
- "nameserver 10.0.0.1\n"
-
#define tar_trivial_usage \
- "-[" IF_FEATURE_TAR_CREATE("c") IF_FEATURE_SEAMLESS_GZ("z") \
+ "-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
- IF_FEATURE_SEAMLESS_Z("Z") "xtvO] " \
+ IF_FEATURE_SEAMLESS_Z("Z") IF_FEATURE_TAR_NOPRESERVE_TIME("m") "vO] " \
IF_FEATURE_TAR_FROM("[-X FILE] ") \
"[-f TARFILE] [-C DIR] [FILE]..."
#define tar_full_usage "\n\n" \
"or list files from a tar file\n" \
"\nOptions:" \
IF_FEATURE_TAR_CREATE( \
- "\n c Create") \
+ "\n c Create" \
+ ) \
"\n x Extract" \
"\n t List" \
"\nArchive format selection:" \
IF_FEATURE_SEAMLESS_Z( \
"\n Z Filter the archive through compress" \
) \
+ IF_FEATURE_TAR_NOPRESERVE_TIME( \
+ "\n m Do not restore mtime" \
+ ) \
"\nFile selection:" \
"\n f Name of TARFILE or \"-\" for stdin" \
"\n O Extract to stdout" \
IF_FEATURE_TAR_FROM( \
+ IF_FEATURE_TAR_LONG_OPTIONS( \
"\n exclude File to exclude" \
+ ) \
"\n X File with names to exclude" \
) \
- "\n C Change to directory DIR before operation" \
+ "\n C Change to DIR before operation" \
"\n v Verbose" \
#define tar_example_usage \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_trivial_usage \
- "[-p] [MASK] [PID | PROG [ARGS]]"
+ "[-p] [MASK] [PID | PROG ARGS]"
#define taskset_full_usage "\n\n" \
"Set or get CPU affinity\n" \
"\nOptions:" \
#define tee_trivial_usage \
"[OPTIONS] [FILE]..."
#define tee_full_usage "\n\n" \
- "Copy standard input to each FILE, and also to standard output\n" \
+ "Copy stdin to each FILE, and also to stdout\n" \
"\nOptions:" \
"\n -a Append to the given FILEs, don't overwrite" \
"\n -i Ignore interrupt signals (SIGINT)" \
"\n -p PORT Port to listen on" \
"\n -b ADDR[:PORT] Address to bind to" \
"\n -F Run in foreground" \
- "\n -i Run as inetd service" \
+ "\n -i Inetd mode" \
IF_FEATURE_TELNETD_INETD_WAIT( \
- "\n -w SEC Run as inetd service in wait mode, linger time SEC" \
+ "\n -w SEC Inetd 'wait' mode, linger time SEC" \
"\n -S Log to syslog (implied by -i or without -F and -w)" \
) \
)
/* "test --help" does not print help (POSIX compat), only "[ --help" does.
- * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION") */
+ * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
+ * Unfortunately, it screws up generated BusyBox.html. TODO. */
#define test_trivial_usage \
"EXPRESSION ]"
#define test_full_usage "\n\n" \
/* with not-implemented options: */
/* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
#define tcpsvd_full_usage "\n\n" \
- "Create TCP socket, bind to IP:PORT and listen\n" \
+ "Create TCP socket, bind to IP:PORT and listen\n" \
"for incoming connection. Run PROG for each connection.\n" \
"\n IP IP to listen on. '0' = all" \
"\n PORT Port to listen on" \
- "\n PROG [ARGS] Program to run" \
+ "\n PROG ARGS Program to run" \
"\n -l NAME Local hostname (else looks up local hostname in DNS)" \
"\n -u USER[:GRP] Change to user/group after bind" \
"\n -c N Handle up to N connections simultaneously" \
"redirecting all further packets with same peer ip:port to it.\n" \
"\n IP IP to listen on. '0' = all" \
"\n PORT Port to listen on" \
- "\n PROG [ARGS] Program to run" \
+ "\n PROG ARGS Program to run" \
"\n -l NAME Local hostname (else looks up local hostname in DNS)" \
"\n -u USER[:GRP] Change to user/group after bind" \
"\n -c N Handle up to N connections simultaneously" \
"\n -u Access files as USER" \
#define time_trivial_usage \
- "[OPTIONS] PROG [ARGS]"
+ "[OPTIONS] PROG ARGS"
#define time_full_usage "\n\n" \
- "Run PROG. When it finishes, its resource usage is displayed.\n" \
+ "Run PROG, display resource usage when it exits\n" \
"\nOptions:" \
"\n -v Verbose" \
#define timeout_trivial_usage \
- "[-t SECS] [-s SIG] PROG [ARGS]"
+ "[-t SECS] [-s SIG] PROG ARGS"
#define timeout_full_usage "\n\n" \
"Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
"Defaults: SECS: 10, SIG: TERM." \
#define top_full_usage "\n\n" \
"Provide a view of process activity in real time.\n" \
"Read the status of all processes from /proc each SECONDS\n" \
- "and show the status for however many processes will fit on the screen." \
+ "and display a screenful of them." \
+//TODO: add options and keyboard commands
#define touch_trivial_usage \
"[-c] [-d DATE] FILE [FILE]..."
#define tr_trivial_usage \
"[-cds] STRING1 [STRING2]"
#define tr_full_usage "\n\n" \
- "Translate, squeeze, and/or delete characters from\n" \
- "standard input, writing to standard output\n" \
+ "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
"\nOptions:" \
"\n -c Take complement of STRING1" \
"\n -d Delete input characters coded STRING1" \
"hello world\n"
#define traceroute_trivial_usage \
- "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
- " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
- " [-z pausemsecs] HOST [data size]"
+ "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
+ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
+ " [-z PAUSE_MSEC] HOST [BYTES]"
#define traceroute_full_usage "\n\n" \
"Trace the route to HOST\n" \
"\nOptions:" \
+ IF_TRACEROUTE6( \
+ "\n -4, -6 Force IP or IPv6 name resolution" \
+ ) \
"\n -F Set the don't fragment bit" \
"\n -I Use ICMP ECHO instead of UDP datagrams" \
- "\n -l Display the ttl value of the returned packet" \
+ "\n -l Display the TTL value of the returned packet" \
+ "\n -d Set SO_DEBUG options to socket" \
+ "\n -n Print numeric addresses" \
+ "\n -r Bypass routing tables, send directly to HOST" \
+ "\n -v Verbose" \
+ "\n -m Max time-to-live (max number of hops)" \
+ "\n -p Base UDP port number used in probes" \
+ "\n (default 33434)" \
+ "\n -q Number of probes per TTL (default 3)" \
+ "\n -s IP address to use as the source address" \
+ "\n -t Type-of-service in probe packets (default 0)" \
+ "\n -w Time in seconds to wait for a response (default 3)" \
+ "\n -g Loose source route gateway (8 max)" \
+
+#define traceroute6_trivial_usage \
+ "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
+ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
+ " HOST [BYTES]"
+#define traceroute6_full_usage "\n\n" \
+ "Trace the route to HOST\n" \
+ "\nOptions:" \
"\n -d Set SO_DEBUG options to socket" \
- "\n -n Print hop addresses numerically rather than symbolically" \
- "\n -r Bypass the normal routing tables and send directly to a host" \
+ "\n -n Print numeric addresses" \
+ "\n -r Bypass routing tables, send directly to HOST" \
"\n -v Verbose" \
- "\n -m max_ttl Max time-to-live (max number of hops)" \
- "\n -p port# Base UDP port number used in probes" \
- "\n (default 33434)" \
- "\n -q nqueries Number of probes per 'ttl' (default 3)" \
- "\n -s src_addr IP address to use as the source address" \
- "\n -t tos Type-of-service in probe packets (default 0)" \
- "\n -w wait Time in seconds to wait for a response" \
- "\n (default 3 sec)" \
- "\n -g Loose source route gateway (8 max)" \
+ "\n -m Max time-to-live (max number of hops)" \
+ "\n -p Base UDP port number used in probes" \
+ "\n (default is 33434)" \
+ "\n -q Number of probes per TTL (default 3)" \
+ "\n -s IP address to use as the source address" \
+ "\n -t Type-of-service in probe packets (default 0)" \
+ "\n -w Time in seconds to wait for a response (default 3)" \
#define true_trivial_usage \
""
#define tty_trivial_usage \
""
#define tty_full_usage "\n\n" \
- "Print file name of standard input's terminal" \
+ "Print file name of stdin's terminal" \
IF_INCLUDE_SUSv2( "\n" \
"\nOptions:" \
"\n -s Print nothing, only return exit status" \
#define ttysize_trivial_usage \
"[w] [h]"
#define ttysize_full_usage "\n\n" \
- "Print dimension(s) of standard input's terminal, on error return 80x25"
+ "Print dimension(s) of stdin's terminal, on error return 80x25"
#define tunctl_trivial_usage \
"[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
"Adjust filesystem options on ext[23] filesystems"
#define udhcpc_trivial_usage \
- "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
- " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
-#define udhcpc_full_usage "\n\n" \
+ "[-fbnqvoCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
+ " [-H HOSTNAME] [-c CID] [-V VENDOR] [-O DHCP_OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
+#define udhcpc_full_usage "\n" \
IF_LONG_OPTS( \
- " -V,--vendorclass=CLASSID Vendor class identifier" \
- "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
- "\n -H,-h,--hostname=HOSTNAME Client hostname" \
- "\n -c,--clientid=CLIENTID Client identifier" \
- "\n -C,--clientid-none Suppress default client identifier" \
- "\n -p,--pidfile=file Create pidfile" \
- "\n -r,--request=IP IP address to request" \
- "\n -s,--script=file Run file at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
- "\n -t,--retries=N Send up to N discover packets" \
- "\n -T,--timeout=N Pause between packets (default 3 seconds)" \
- "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
- "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \
- "\n -o,--no-default-options Don't request any options (unless -O is also given)" \
- "\n -f,--foreground Run in foreground" \
+ "\n -i,--interface IFACE Interface to use (default eth0)" \
+ "\n -p,--pidfile FILE Create pidfile" \
+ "\n -r,--request IP IP address to request" \
+ "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t,--retries N Send up to N discover packets" \
+ "\n -T,--timeout N Pause between packets (default 3 seconds)" \
+ "\n -A,--tryagain N Wait N seconds after failure (default 20)" \
+ "\n -f,--foreground Run in foreground" \
USE_FOR_MMU( \
- "\n -b,--background Background if lease is not immediately obtained" \
+ "\n -b,--background Background if lease is not obtained" \
) \
- "\n -S,--syslog Log to syslog too" \
- "\n -n,--now Exit with failure if lease is not immediately obtained" \
- "\n -q,--quit Quit after obtaining lease" \
- "\n -R,--release Release IP on quit" \
+ "\n -S,--syslog Log to syslog too" \
+ "\n -n,--now Exit if lease is not obtained" \
+ "\n -q,--quit Exit after obtaining lease" \
+ "\n -R,--release Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P,--client-port N Use port N instead of default 68" \
+ "\n -P,--client-port N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
- "\n -a,--arping Use arping to validate offered address" \
+ "\n -a,--arping Use arping to validate offered address" \
) \
+ "\n -O,--request-option OPT Request DHCP option OPT (cumulative)" \
+ "\n -o,--no-default-options Don't request any options (unless -O is given)" \
+ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
+ "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
+ "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c,--clientid CLIENTID Client identifier (default own MAC)" \
+ "\n -C,--clientid-none Don't send client identifier" \
) \
IF_NOT_LONG_OPTS( \
- " -V CLASSID Vendor class identifier" \
- "\n -i INTERFACE Interface to use (default: eth0)" \
- "\n -H,-h HOSTNAME Client hostname" \
- "\n -c CLIENTID Client identifier" \
- "\n -C Suppress default client identifier" \
- "\n -p file Create pidfile" \
+ "\n -i IFACE Interface to use (default eth0)" \
+ "\n -p FILE Create pidfile" \
"\n -r IP IP address to request" \
- "\n -s file Run file at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
- "\n -t N Send up to N request packets" \
- "\n -T N Try to get a lease for N seconds (default 3)" \
+ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t N Send up to N discover packets" \
+ "\n -T N Pause between packets (default 3 seconds)" \
"\n -A N Wait N seconds (default 20) after failure" \
+ "\n -x OPT:VAL Include option OPT in sent packets" \
"\n -O OPT Request DHCP option OPT (cumulative)" \
- "\n -o Don't request any options (unless -O is also given)" \
+ "\n -o Don't request any options (unless -O is given)" \
"\n -f Run in foreground" \
USE_FOR_MMU( \
- "\n -b Background if lease is not immediately obtained" \
+ "\n -b Background if lease is not obtained" \
) \
"\n -S Log to syslog too" \
- "\n -n Exit with failure if lease is not immediately obtained" \
- "\n -q Quit after obtaining lease" \
- "\n -R Release IP on quit" \
+ "\n -n Exit if lease is not obtained" \
+ "\n -q Exit after obtaining lease" \
+ "\n -R Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 68" \
+ "\n -P N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
"\n -a Use arping to validate offered address" \
) \
+ "\n -F NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h NAME Send NAME as client hostname (default none)" \
+ "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c CLIENTID Client identifier (default own MAC)" \
+ "\n -C Don't send client identifier" \
)
#define udhcpd_trivial_usage \
"\n -f Run in foreground" \
"\n -S Log to syslog too" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 67" \
+ "\n -P N Use port N (default 67)" \
)
#define umount_trivial_usage \
- "[flags] FILESYSTEM|DIRECTORY"
+ "[OPTIONS] FILESYSTEM|DIRECTORY"
#define umount_full_usage "\n\n" \
"Unmount file systems\n" \
"\nOptions:" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
- "[-c] [-f] [name...]"
+ "[-cf] [FILE]..."
#define uncompress_full_usage "\n\n" \
"Uncompress .Z file[s]\n" \
"\nOptions:" \
"\n -f Overwrite an existing file" \
#define unexpand_trivial_usage \
- "[-f][-a][-t NUM] [FILE|-]"
+ "[-fa][-t N] [FILE]..."
#define unexpand_full_usage "\n\n" \
- "Convert spaces to tabs, writing to standard output\n" \
+ "Convert spaces to tabs, writing to stdout\n" \
"\nOptions:" \
IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
"\n -a,--all Convert all blanks" \
)
#define uniq_trivial_usage \
- "[-fscduw]... [INPUT [OUTPUT]]"
+ "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
#define uniq_full_usage "\n\n" \
"Discard duplicate lines\n" \
"\nOptions:" \
"c\n"
#define unzip_trivial_usage \
- "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
+ "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
#define unzip_full_usage "\n\n" \
"Extract files from ZIP archives\n" \
"\nOptions:" \
"\n -o Overwrite files without prompting" \
"\n -p Send output to stdout" \
"\n -q Quiet" \
- "\n -x Exclude these files" \
- "\n -d Extract files into this directory" \
+ "\n -x XLST Exclude these files" \
+ "\n -d DIR Extract files into DIR" \
#define uptime_trivial_usage \
""
"[pauses for 1 second]\n"
#define uudecode_trivial_usage \
- "[-o outfile] [infile]"
+ "[-o OUTFILE] [INFILE]"
#define uudecode_full_usage "\n\n" \
"Uudecode a file\n" \
"Finds outfile name in uuencoded source unless -o is given"
"-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
#define uuencode_trivial_usage \
- "[-m] [infile] stored_filename"
+ "[-m] [INFILE] STORED_FILENAME"
#define uuencode_full_usage "\n\n" \
"Uuencode a file to stdout\n" \
"\nOptions:" \
IF_FEATURE_VI_COLON( \
"\n -c Initial command to run ($EXINIT also available)") \
IF_FEATURE_VI_READONLY( \
- "\n -R Read-only - don't write to the file") \
+ "\n -R Read-only") \
"\n -H Short help regarding available features" \
#define vlock_trivial_usage \
"Show CD volume name of the DEVICE (default /dev/cdrom)"
#define wall_trivial_usage \
- "[file]"
+ "[FILE]"
#define wall_full_usage "\n\n" \
- "Write content of file or standard-input to all logged-in users"
+ "Write content of FILE or stdin to all logged-in users"
#define wall_sample_usage \
"echo foo | wall\n" \
"wall ./mymessage"
#define watch_trivial_usage \
- "[-n seconds] [-t] PROG [ARGS]"
+ "[-n SEC] [-t] PROG ARGS"
#define watch_full_usage "\n\n" \
"Run PROG periodically\n" \
"\nOptions:" \
#define wc_trivial_usage \
"[OPTIONS] [FILE]..."
#define wc_full_usage "\n\n" \
- "Print line, word, and byte counts for each FILE, and a total line if\n" \
- "more than one FILE is specified. With no FILE, read standard input.\n" \
+ "Print line, word, and byte counts for each FILE (or stdin),\n" \
+ "and a total line if more than one FILE is specified\n" \
"\nOptions:" \
"\n -c Print the byte counts" \
"\n -l Print the newline counts" \
#define wget_trivial_usage \
IF_FEATURE_WGET_LONG_OPTIONS( \
- "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
+ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
- " [-U|--user-agent agent] url" \
+ " [--no-check-certificate] [-U|--user-agent AGENT] URL" \
) \
IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
- "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
+ "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT] URL" \
)
#define wget_full_usage "\n\n" \
"Retrieve files via HTTP or FTP\n" \
"\n -c Continue retrieval of aborted transfer" \
"\n -q Quiet" \
"\n -P Set directory prefix to DIR" \
- "\n -O Save to filename ('-' for stdout)" \
- "\n -U Adjust 'User-Agent' field" \
+ "\n -O FILE Save to FILE ('-' for stdout)" \
+ "\n -U STR Use STR for User-Agent header" \
"\n -Y Use proxy ('on' or 'off')" \
#define which_trivial_usage \
"Print the user name associated with the current effective user id"
#define xargs_trivial_usage \
- "[OPTIONS] [PROG [ARGS]]"
+ "[OPTIONS] [PROG ARGS]"
#define xargs_full_usage "\n\n" \
- "Run PROG on every item given by standard input\n" \
+ "Run PROG on every item given by stdin\n" \
"\nOptions:" \
IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
"\n -p Ask user whether to run each command") \