"\n -r Repetitions" \
"\n -n Start new tone" \
-#define fbsplash_trivial_usage \
- "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
-#define fbsplash_full_usage "\n\n" \
- "Options:" \
- "\n -s Image" \
- "\n -c Hide cursor" \
- "\n -d Framebuffer device (default /dev/fb0)" \
- "\n -i Config file (var=value):" \
- "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
- "\n BAR_R,BAR_G,BAR_B" \
- "\n -f Control pipe (else exit after drawing image)" \
- "\n commands: 'NN' (% for progress bar) or 'exit'" \
+#define bootchartd_trivial_usage \
+ "start [PROG ARGS]|stop|init"
+#define bootchartd_full_usage "\n\n" \
+ "Create /var/log/bootchart.tgz with boot chart data\n" \
+ "\nOptions:" \
+ "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
+ "\nstop: send USR1 to all bootchartd processes" \
+ "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
+ "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
"\n setpathcost BRIDGE COST Set path cost" \
"\n setportprio BRIDGE PRIO Set port priority" \
"\n setbridgeprio BRIDGE PRIO Set bridge priority" \
- "\n stp BRIDGE [1|0] STP on/off" \
+ "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
) \
#define bunzip2_trivial_usage \
#define bzip2_full_usage "\n\n" \
"Compress FILEs (or stdin) with bzip2 algorithm\n" \
"\nOptions:" \
- "\n -c Write to stout" \
+ "\n -c Write to stdout" \
"\n -d Decompress" \
"\n -f Force" \
"\n -1..-9 Compression level" \
"Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]") "]]"
+ "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
#define cmp_full_usage "\n\n" \
- "Compares FILE1 vs stdin if FILE2 is not specified\n" \
+ "Compare FILE1 with FILE2 (or stdin)\n" \
"\nOptions:" \
"\n -l Write the byte numbers (decimal) and values (octal)" \
"\n for all differing bytes" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage "\n\n" \
- "Compare FILE1 to FILE2, or to stdin if - is specified\n" \
+ "Compare FILE1 with FILE2\n" \
"\nOptions:" \
"\n -1 Suppress lines unique to FILE1" \
"\n -2 Suppress lines unique to FILE2" \
#define dpkg_full_usage "\n\n" \
"Install, remove and manage Debian packages\n" \
"\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -i,--install Install the package" \
+ "\n -l,--list List of installed packages" \
+ "\n --configure Configure an unpackaged package" \
+ "\n -P,--purge Purge all files of a package" \
+ "\n -r,--remove Remove all but the configuration files for a package" \
+ "\n --unpack Unpack a package, but don't configure it" \
+ "\n --force-depends Ignore dependency problems" \
+ "\n --force-confnew Overwrite existing config files when installing" \
+ "\n --force-confold Keep old config files when installing" \
+ ) \
+ IF_NOT_LONG_OPTS( \
"\n -i Install the package" \
"\n -l List of installed packages" \
"\n -C Configure an unpackaged package" \
- "\n -F depends Ignore dependency problems" \
"\n -P Purge all files of a package" \
"\n -r Remove all but the configuration files for a package" \
"\n -u Unpack a package, but don't configure it" \
+ "\n -F depends Ignore dependency problems" \
+ "\n -F confnew Overwrite existing config files when installing" \
+ "\n -F confold Keep old config files when installing" \
+ )
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
"Display DHCP leases granted by udhcpd\n" \
"\nOptions:" \
IF_LONG_OPTS( \
- "\n -f,--file=FILE Leases file to load" \
- "\n -r,--remaining Interpret lease times as time remaining" \
- "\n -a,--absolute Interpret lease times as expire time" \
+ "\n -f,--file=FILE Lease file" \
+ "\n -r,--remaining Show remaining time" \
+ "\n -a,--absolute Show expiration time" \
) \
IF_NOT_LONG_OPTS( \
- "\n -f FILE Leases file to load" \
- "\n -r Interpret lease times as time remaining" \
- "\n -a Interpret lease times as expire time" \
+ "\n -f FILE Lease file" \
+ "\n -r Show remaining time" \
+ "\n -a Show expiration time" \
)
/*
IF_FEATURE_FANCY_ECHO( "\n" \
"\nOptions:" \
"\n -n Suppress trailing newline" \
- "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
- "\n -E Disable interpretation of backslash-escaped characters" \
+ "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
+ "\n -E Don't interpret backslash escapes (default)" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
"\n -p pass Append four or six byte password PW to the packet" \
#define expand_trivial_usage \
- "[-i] [-t N] [FILE|-]"
+ "[-i] [-t N] [FILE]..."
#define expand_full_usage "\n\n" \
"Convert tabs to spaces, writing to stdout\n" \
"\nOptions:" \
"$ echo $?\n" \
"1\n"
+#define fbsplash_trivial_usage \
+ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
+#define fbsplash_full_usage "\n\n" \
+ "Options:" \
+ "\n -s Image" \
+ "\n -c Hide cursor" \
+ "\n -d Framebuffer device (default /dev/fb0)" \
+ "\n -i Config file (var=value):" \
+ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
+ "\n BAR_R,BAR_G,BAR_B" \
+ "\n -f Control pipe (else exit after drawing image)" \
+ "\n commands: 'NN' (% for progress bar) or 'exit'" \
+
#define fbset_trivial_usage \
"[OPTIONS] [MODE]"
#define fbset_full_usage "\n\n" \
) \
"\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
"\n -C CYLINDERS Set number of cylinders/heads/sectors" \
- "\n -H HEADS\n" \
+ "\n -H HEADS" \
"\n -S SECTORS" \
#define blkid_trivial_usage \
"\nOptions:" \
"\n -v Verbose" \
+#define flock_trivial_usage \
+ "[-sxun] FD|{FILE [-c] PROG ARGS}"
+#define flock_full_usage "\n\n" \
+ "[Un]lock file descriptor, or lock FILE and run PROG\n" \
+ "\nOptions:" \
+ "\n -s Shared lock" \
+ "\n -x Exclusive lock (default)" \
+ "\n -u Unlock FD" \
+ "\n -n Fail rather than wait" \
+
#define fold_trivial_usage \
"[-bs] [-w WIDTH] [FILE]..."
#define fold_full_usage "\n\n" \
#define getsebool_trivial_usage \
"-a or getsebool boolean..."
#define getsebool_full_usage "\n\n" \
- " -a Show all SELinux booleans"
+ " -a Show all selinux booleans"
#define getty_trivial_usage \
"[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
"\n -H HOST Log HOST into the utmp file as the hostname" \
#define grep_trivial_usage \
- "[-HhnlLoqvsri" \
- IF_DESKTOP("w") \
+ "[-HhnlLoqvsriw" \
"F" \
IF_FEATURE_GREP_EGREP_ALIAS("E") \
IF_EXTRA_COMPAT("z") \
"\n -s Suppress open and read errors" \
"\n -r Recurse" \
"\n -i Ignore case" \
- IF_DESKTOP( \
"\n -w Match whole words only" \
- ) \
"\n -F PATTERN is a literal (not regexp)" \
IF_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regexp" \
"[OPTIONS] [FILE]..."
#define head_full_usage "\n\n" \
"Print first 10 lines of each FILE (or stdin) to stdout.\n" \
- "With more than one FILE, precede each with a header giving the file name.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
"\nOptions:" \
- "\n -n N Print first N lines instead of first 10" \
+ "\n -n N[kbm] Print first N lines" \
IF_FEATURE_FANCY_HEAD( \
- "\n -c N Output the first N bytes" \
- "\n -q Never output headers giving file names" \
- "\n -v Always output headers giving file names") \
+ "\n -c N[kbm] Print first N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ ) \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
+#define tail_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define tail_full_usage "\n\n" \
+ "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
+ "\nOptions:" \
+ "\n -f Print data as file grows" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -s SECONDS Wait SECONDS between reads with -f" \
+ ) \
+ "\n -n N[kbm] Print last N lines" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -c N[kbm] Print last N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
+ "\nIf N starts with a '+', output begins with the Nth item from the start" \
+ "\nof each file, not from the end." \
+ ) \
+
+#define tail_example_usage \
+ "$ tail -n 1 /etc/resolv.conf\n" \
+ "nameserver 10.0.0.1\n"
+
#define hexdump_trivial_usage \
"[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
#define hexdump_full_usage "\n\n" \
"\n -i Inetd mode" \
"\n -f Don't daemonize" \
"\n -v[v] Verbose" \
- "\n -c FILE Configuration file (default httpd.conf)" \
"\n -p [IP:]PORT Bind to ip:port (default *:80)" \
IF_FEATURE_HTTPD_SETUID( \
"\n -u USER[:GRP] Set uid/gid after binding to port") \
IF_FEATURE_HTTPD_BASIC_AUTH( \
"\n -r REALM Authentication Realm for Basic Authentication") \
"\n -h HOME Home directory (default .)" \
+ "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
IF_FEATURE_HTTPD_AUTH_MD5( \
"\n -m STRING MD5 crypt STRING") \
"\n -e STRING HTML encode STRING" \
/* "\n -c Use tcpclient. Ignored" */ \
/* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
"\n -s Skip authorization" \
- "\n -T Get messages with TOP instead with RETR" \
+ "\n -T Get messages with TOP instead of RETR" \
"\n -k Keep retrieved messages on the server" \
"\n -t SEC Network timeout" \
IF_FEATURE_POPMAILDIR_DELIVERY( \
- "\n -F \"PROG ARGS\" Filter program. May be multiple" \
+ "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
"\n -M \"PROG ARGS\" Delivery program" \
) \
+ "\n" \
+ "\nFetch from plain POP3 server:" \
+ "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
+ "\nFetch from SSLed POP3 server and delete fetched emails:" \
+ "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
/* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
/* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
/* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
"Halt and shut off power\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
- "\n -n No call to sync()" \
+ "\n -n Do not sync" \
"\n -f Force power off (don't go through init)" \
#define printenv_trivial_usage \
"Report process status\n" \
USAGE_PS \
IF_SELINUX( \
- "\n -Z Show SE Linux context" \
+ "\n -Z Show selinux context" \
) \
IF_FEATURE_PS_WIDE( \
"\n w Wide output" \
"Options:" \
"\n -m mapfile (Default: /boot/System.map)" \
"\n -p profile (Default: /proc/profile)" \
- "\n -M mult Set the profiling multiplier to mult" \
+ "\n -M NUM Set the profiling multiplier to NUM" \
"\n -i Print only info about the sampling step" \
"\n -v Verbose" \
"\n -a Print all symbols, even if count is 0" \
"Resize the screen"
#define restorecon_trivial_usage \
- "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
+ "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
#define restorecon_full_usage "\n\n" \
"Reset security contexts of files in pathname\n" \
- "\n -i Ignore files that don't exist" \
- "\n -f file File with list of files to process. Use - for stdin" \
- "\n -e directory Directory to exclude" \
- "\n -R,-r Recurse" \
- "\n -n Don't change any file labels" \
- "\n -o file Save list of files with incorrect context" \
- "\n -v Verbose" \
- "\n -vv Show changed labels" \
- "\n -F Force reset of context to match file_context" \
- "\n for customizable files, or the user section," \
- "\n if it has changed" \
+ "\n -i Ignore files that don't exist" \
+ "\n -f FILE File with list of files to process" \
+ "\n -e DIR Directory to exclude" \
+ "\n -R,-r Recurse" \
+ "\n -n Don't change any file labels" \
+ "\n -o FILE Save list of files with incorrect context" \
+ "\n -v Verbose" \
+ "\n -vv Show changed labels" \
+ "\n -F Force reset of context to match file_context" \
+ "\n for customizable files, or the user section," \
+ "\n if it has changed" \
+
+#define rfkill_trivial_usage \
+ "COMMAND [INDEX|TYPE]"
+#define rfkill_full_usage "\n\n" \
+ "Enable/disable wireless devices\n" \
+ "\nCommands:" \
+ "\n list [INDEX|TYPE] List current state" \
+ "\n block INDEX|TYPE Disable device" \
+ "\n unblock INDEX|TYPE Enable device" \
+ "\n" \
+ "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
+ "\n wimax, wwan, gps, fm" \
#define rm_trivial_usage \
"[OPTIONS] FILE..."
"\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
#define rpm_trivial_usage \
- "-i -q[ildc]p PACKAGE.rpm"
+ "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
#define rpm_full_usage "\n\n" \
"Manipulate RPM packages\n" \
- "\nOptions:" \
+ "\nCommands:" \
"\n -i Install package" \
- "\n -q Query package" \
- "\n -p Query uninstalled package" \
+ "\n -qp Query package" \
+ "\nOptions:" \
"\n -i Show information" \
"\n -l List contents" \
"\n -d List documents" \
#define runcon_trivial_usage \
"[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
- " runcon CONTEXT PROG ARGS"
+ "runcon CONTEXT PROG ARGS"
#define runcon_full_usage "\n\n" \
"Run PROG in a different security context\n" \
"\n CONTEXT Complete security context\n" \
#define script_full_usage "\n\n" \
"Options:" \
"\n -a Append output" \
- "\n -c Run PROG, not shell" \
+ "\n -c PROG Run PROG, not shell" \
"\n -f Flush output after each write" \
"\n -q Quiet" \
IF_SCRIPTREPLAY( \
"See setsid(2) for details." \
#define last_trivial_usage \
- ""IF_FEATURE_LAST_FANCY("[-HW] [-f file]")
+ ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
#define last_full_usage "\n\n" \
"Show listing of the last users that logged into the system" \
IF_FEATURE_LAST_FANCY( "\n" \
"\nOptions:" \
/* "\n -H Show header line" */ \
"\n -W Display with no host column truncation" \
- "\n -f file Read from file instead of /var/log/wtmp" \
+ "\n -f FILE Read from FILE instead of /var/log/wtmp" \
)
#define showkey_trivial_usage \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
IF_SELINUX( \
- " %C Security context in SELinux\n" \
+ " %C Security context in selinux\n" \
) \
" %i File System ID in hex\n" \
" %l Maximum length of filenames\n" \
"STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
#define svlogd_trivial_usage \
- "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
+ "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
#define svlogd_full_usage "\n\n" \
"Continuously read log data from stdin, optionally\n" \
"filter log messages, and write the data to one or more automatically\n" \
#define tac_full_usage "\n\n" \
"Concatenate FILEs and print them in reverse"
-#define tail_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define tail_full_usage "\n\n" \
- "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
- "With more than one FILE, precede each with a header giving the file name.\n" \
- "\nOptions:" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -c N[kbm] Output last N bytes") \
- "\n -n N[kbm] Print last N lines instead of last 10" \
- "\n -f Output data as the file grows" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -q Never output headers giving file names" \
- "\n -s SEC Wait SEC seconds between reads with -f" \
- "\n -v Always output headers giving file names" \
- "\n" \
- "\nIf the first character of N (bytes or lines) is a '+', output begins with" \
- "\nthe Nth item from the start of each file, otherwise, print the last N items" \
- "\nin the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
-
-#define tail_example_usage \
- "$ tail -n 1 /etc/resolv.conf\n" \
- "nameserver 10.0.0.1\n"
-
#define tar_trivial_usage \
"-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
"[-cds] STRING1 [STRING2]"
#define tr_full_usage "\n\n" \
"Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
- "stdin, writing to stdout\n" \
"\nOptions:" \
"\n -c Take complement of STRING1" \
"\n -d Delete input characters coded STRING1" \
"Adjust filesystem options on ext[23] filesystems"
#define udhcpc_trivial_usage \
- "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
- " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
-#define udhcpc_full_usage "\n\n" \
+ "[-fbnqvoCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
+ " [-H HOSTNAME] [-c CID] [-V VENDOR] [-O DHCP_OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
+#define udhcpc_full_usage "\n" \
IF_LONG_OPTS( \
- " -V,--vendorclass=CLASSID Vendor class identifier" \
- "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
- "\n -H,-h,--hostname=HOSTNAME Client hostname" \
- "\n -c,--clientid=CLIENTID Client identifier" \
- "\n -C,--clientid-none Suppress default client identifier" \
- "\n -p,--pidfile=FILE Create pidfile" \
- "\n -r,--request=IP IP address to request" \
- "\n -s,--script=FILE Run FILE at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
- "\n -t,--retries=N Send up to N discover packets" \
- "\n -T,--timeout=N Pause between packets (default 3 seconds)" \
- "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
- "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \
- "\n -o,--no-default-options Don't request any options (unless -O is also given)" \
- "\n -f,--foreground Run in foreground" \
+ "\n -i,--interface IFACE Interface to use (default eth0)" \
+ "\n -p,--pidfile FILE Create pidfile" \
+ "\n -r,--request IP IP address to request" \
+ "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t,--retries N Send up to N discover packets" \
+ "\n -T,--timeout N Pause between packets (default 3 seconds)" \
+ "\n -A,--tryagain N Wait N seconds after failure (default 20)" \
+ "\n -f,--foreground Run in foreground" \
USE_FOR_MMU( \
- "\n -b,--background Background if lease is not immediately obtained" \
+ "\n -b,--background Background if lease is not obtained" \
) \
- "\n -S,--syslog Log to syslog too" \
- "\n -n,--now Exit with failure if lease is not immediately obtained" \
- "\n -q,--quit Quit after obtaining lease" \
- "\n -R,--release Release IP on quit" \
+ "\n -S,--syslog Log to syslog too" \
+ "\n -n,--now Exit if lease is not obtained" \
+ "\n -q,--quit Exit after obtaining lease" \
+ "\n -R,--release Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P,--client-port N Use port N instead of default 68" \
+ "\n -P,--client-port N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
- "\n -a,--arping Use arping to validate offered address" \
+ "\n -a,--arping Use arping to validate offered address" \
) \
+ "\n -O,--request-option OPT Request DHCP option OPT (cumulative)" \
+ "\n -o,--no-default-options Don't request any options (unless -O is given)" \
+ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
+ "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
+ "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c,--clientid CLIENTID Client identifier (default own MAC)" \
+ "\n -C,--clientid-none Don't send client identifier" \
) \
IF_NOT_LONG_OPTS( \
- " -V CLASSID Vendor class identifier" \
- "\n -i INTERFACE Interface to use (default: eth0)" \
- "\n -H,-h HOSTNAME Client hostname" \
- "\n -c CLIENTID Client identifier" \
- "\n -C Suppress default client identifier" \
+ "\n -i IFACE Interface to use (default eth0)" \
"\n -p FILE Create pidfile" \
"\n -r IP IP address to request" \
- "\n -s FILE Run FILE at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
- "\n -t N Send up to N request packets" \
- "\n -T N Try to get a lease for N seconds (default 3)" \
+ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t N Send up to N discover packets" \
+ "\n -T N Pause between packets (default 3 seconds)" \
"\n -A N Wait N seconds (default 20) after failure" \
+ "\n -x OPT:VAL Include option OPT in sent packets" \
"\n -O OPT Request DHCP option OPT (cumulative)" \
- "\n -o Don't request any options (unless -O is also given)" \
+ "\n -o Don't request any options (unless -O is given)" \
"\n -f Run in foreground" \
USE_FOR_MMU( \
- "\n -b Background if lease is not immediately obtained" \
+ "\n -b Background if lease is not obtained" \
) \
"\n -S Log to syslog too" \
- "\n -n Exit with failure if lease is not immediately obtained" \
- "\n -q Quit after obtaining lease" \
- "\n -R Release IP on quit" \
+ "\n -n Exit if lease is not obtained" \
+ "\n -q Exit after obtaining lease" \
+ "\n -R Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 68" \
+ "\n -P N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
"\n -a Use arping to validate offered address" \
) \
+ "\n -F NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h NAME Send NAME as client hostname (default none)" \
+ "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c CLIENTID Client identifier (default own MAC)" \
+ "\n -C Don't send client identifier" \
)
#define udhcpd_trivial_usage \
"\n -f Run in foreground" \
"\n -S Log to syslog too" \
IF_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 67" \
+ "\n -P N Use port N (default 67)" \
)
#define umount_trivial_usage \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
- "[-c] [-f] [FILE]..."
+ "[-cf] [FILE]..."
#define uncompress_full_usage "\n\n" \
"Uncompress .Z file[s]\n" \
"\nOptions:" \
"\n -f Overwrite an existing file" \
#define unexpand_trivial_usage \
- "[-f][-a][-t N] [FILE|-]"
+ "[-fa][-t N] [FILE]..."
#define unexpand_full_usage "\n\n" \
"Convert spaces to tabs, writing to stdout\n" \
"\nOptions:" \
)
#define uniq_trivial_usage \
- "[-fscduw]... [INPUT [OUTPUT]]"
+ "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
#define uniq_full_usage "\n\n" \
"Discard duplicate lines\n" \
"\nOptions:" \
"c\n"
#define unzip_trivial_usage \
- "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
+ "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
#define unzip_full_usage "\n\n" \
"Extract files from ZIP archives\n" \
"\nOptions:" \
"\n -o Overwrite files without prompting" \
"\n -p Send output to stdout" \
"\n -q Quiet" \
- "\n -x Exclude these files" \
- "\n -d Extract files into this directory" \
+ "\n -x XLST Exclude these files" \
+ "\n -d DIR Extract files into DIR" \
#define uptime_trivial_usage \
""
#define wget_trivial_usage \
IF_FEATURE_WGET_LONG_OPTIONS( \
- "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
+ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
- " [--no-check-certificate] [-U|--user-agent agent] url" \
+ " [--no-check-certificate] [-U|--user-agent AGENT] URL" \
) \
IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
- "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
+ "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT] URL" \
)
#define wget_full_usage "\n\n" \
"Retrieve files via HTTP or FTP\n" \
"\n -c Continue retrieval of aborted transfer" \
"\n -q Quiet" \
"\n -P Set directory prefix to DIR" \
- "\n -O Save to filename ('-' for stdout)" \
- "\n -U Adjust 'User-Agent' field" \
+ "\n -O FILE Save to FILE ('-' for stdout)" \
+ "\n -U STR Use STR for User-Agent header" \
"\n -Y Use proxy ('on' or 'off')" \
#define which_trivial_usage \