+/* vi: set sw=4 ts=4: */
#ifndef __BB_USAGE_H__
#define __BB_USAGE_H__
"\t-c\tcheck MD5 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
"\t-s\tdon't output anything, status code shows success\n" \
- "\t-w\twarn about improperly formated MD5 checksum lines")
+ "\t-w\twarn about improperly formatted MD5 checksum lines")
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
#define more_example_usage \
"$ dmesg | more\n"
-#ifdef CONFIG_FEATURE_MOUNT_LOOP
-# define USAGE_MOUNT_LOOP(a) a
-#else
-# define USAGE_MOUNT_LOOP(a)
-#endif
-#ifdef CONFIG_FEATURE_MTAB_SUPPORT
-# define USAGE_MTAB(a) a
-#else
-# define USAGE_MTAB(a)
-#endif
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
"Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \
"Flags:\n" \
"\t-a:\t\tMount all filesystems in fstab\n" \
- USAGE_MTAB( \
- "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \
- "\t-n:\t\tDon't write a mount table entry\n" \
+ USE_FEATURE_MTAB_SUPPORT( \
+ "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \
+ "\t-n:\t\tDon't write a mount table entry\n" \
) \
"\t-o option:\tOne of many filesystem options, listed below\n" \
"\t-r:\t\tMount the filesystem read-only\n" \
"\t-w:\t\tMount for reading and writing (default)\n" \
"\n" \
"Options for use with the \"-o\" flag:\n" \
- "\tasync/sync:\tWrites are asynchronous / synchronous\n" \
- "\tatime/noatime:\tEnable / disable updates to inode access times\n" \
- "\tdev/nodev:\tAllow use of special device files / disallow them\n" \
- "\texec/noexec:\tAllow use of executable files / disallow them\n" \
- USAGE_MOUNT_LOOP( \
- "\tloop:\t\t Ignored (loop devices are autodetected)\n" \
+ USE_FEATURE_MOUNT_LOOP( \
+ "\tloop:\t\tIgnored (loop devices are autodetected)\n" \
+ ) \
+ USE_FEATURE_MOUNT_FLAGS( \
+ "\t[a]sync:\tWrites are asynchronous / synchronous\n" \
+ "\t[no]atime:\tDisable / enable updates to inode access times\n" \
+ "\t[no]diratime:\tDisable / enable atime updates to directories\n" \
+ "\t[no]dev:\tAllow use of special device files / disallow them\n" \
+ "\t[no]exec:\tAllow use of executable files / disallow them\n" \
+ "\t[no]suid:\tAllow set-user-id-root programs / disallow them\n" \
+ "\t[r]shared:\tConvert [recursively] to a shared subtree.\n" \
+ "\t[r]slave:\tConvert [recursively] to a slave subtree.\n" \
+ "\t[r]private:\tConvert [recursively] to a private subtree\n" \
+ "\t[un]bindable:\tMake mount point [un]able to be bind mounted.\n" \
+ "\tbind:\t\tBind a directory to an additional location\n" \
+ "\tmove:\t\tRelocate an existing mount point.\n" \
) \
- "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them\n" \
"\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \
"\tro/rw:\t\tMount for read-only / read-write\n" \
- "\tbind:\t\tBind a directory to an additional location\n" \
- "\tmove:\t\tRelocate an existing mount point.\n" \
"\nThere are EVEN MORE flags that are specific to each filesystem\n" \
"You'll have to see the written documentation for those filesystems"
#define mount_example_usage \
" or\n" \
"$ nameif -c /etc/my_mactab_file\n" \
-#ifdef CONFIG_NC_GAPING_SECURITY_HOLE
-# define USAGE_NC_EXEC(a) a
+#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
+#define NC_BR1 "["
+#define NC_BR2 "]"
#else
-# define USAGE_NC_EXEC(a)
+#define NC_BR1
+#define NC_BR2
#endif
+
#define nc_trivial_usage \
- "[OPTIONS] [IP] [port]"
+ "[" \
+ NC_BR1 USE_NC_SERVER("-lp")USE_NC_EXTRA("iwf") NC_BR2 \
+ " ["USE_NC_EXTRA("FILENAME|")"{IPADDR PORTNUM}]"USE_NC_EXTRA(" [-e COMMAND]")
#define nc_full_usage \
- "Netcat opens a pipe to IP:port\n\n" \
- "Options:\n" \
- "\t-l\t\tlisten mode, for inbound connects\n" \
- "\t-p PORT\t\tlocal port number\n" \
- "\t-i SECS\t\tdelay interval for lines sent\n" \
- USAGE_NC_EXEC( \
- "\t-e PROG\t\tprogram to exec after connect (dangerous!)\n" \
+ "Netcat opens a pipe, either to IP:port\n\n" \
+ "Options:" \
+ USE_NC_EXTRA( \
+ "\n\t-e\t\texec rest of command line after connect\n" \
+ "\t-i SECS\t\tdelay interval for lines sent\n" \
+ "\t-w SECS\t\ttimeout for connect\n" \
+ "\t-f filename\tuse file (ala /dev/ttyS0) instead of network" \
) \
- "\t-w SECS\t\ttimeout for connects and final net reads"
+ USE_NC_SERVER( \
+ "\n\t-l\t\tlisten mode, for inbound connects\n" \
+ USE_NC_EXTRA("\t\t\t(use -l twice with -e for persistent server)\n") \
+ "\t-p PORT\t\tlocal port number" \
+ )
+
+
+#define nc_notes_usage "" \
+ USE_NC_EXTRA( \
+ "To use netcat as a terminal emulator on a serial port:\n\n" \
+ "$ stty 115200 -F /dev/ttyS0\n" \
+ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
+ ) ""
+
#define nc_example_usage \
"$ nc foobar.somedomain.com 25\n" \
"220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
"\t-c\tcheck SHA1 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
"\t-s\tdon't output anything, status code shows success\n" \
- "\t-w\twarn about improperly formated SHA1 checksum lines")
+ "\t-w\twarn about improperly formatted SHA1 checksum lines")
#ifdef CONFIG_FEATURE_FANCY_SLEEP
# define USAGE_FANCY_SLEEP(a) a
"\n\t-o|--oknodo\t\t\texit status 0 if nothing done" \
"\n\t-v|--verbose\t\t\tbe verbose" \
) \
- "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
+ "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)" \
+ "\n\t-U|--chuid <username>|<uid>\tstart process with this name"
#ifdef CONFIG_FEATURE_STAT_FORMAT
# define USAGE_STAT_FORMAT(a) a
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
-#define taskset_trivial_usage \
- "[OPTIONS] [mask] [pid | command [arg]...]"
-#define taskset_full_usage \
- "Set or get CPU affinity.\n\n" \
- "Options:\n" \
- "\t-p\toperate on an existing PID"
-#define taskset_example_usage \
- "$ taskset 0x7 ./dgemm_test&\n" \
- "$ taskset -p 0x1 $!\n" \
- "pid 4790's current affinity mask: 7\n" \
- "pid 4790's new affinity mask: 1\n" \
- "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
- "pid 6671's current affinity mask: 1\n" \
- "pid 6671's new affinity mask: 1\n" \
- "$ taskset -p 1\n"
- "pid 1's current affinity mask: 3\n"
-
#define tee_trivial_usage \
"[OPTION]... [FILE]..."
#define tee_full_usage \
#define udhcpd_full_usage \
""
-#ifdef CONFIG_FEATURE_MOUNT_FORCE
-# define USAGE_MOUNT_FORCE(a) a
-#else
-# define USAGE_MOUNT_FORCE(a)
-#endif
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
"Unmount file systems\n" \
"\nFlags:\n" "\t-a\tUnmount all file systems" \
- USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
+ USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
"\n\t-r\tTry to remount devices as read-only if mount is busy" \
"\n\t-l\tLazy umount (detach filesystem)" \
"\n\t-f\tForce umount (i.e., unreachable NFS server)" \
- USAGE_MOUNT_LOOP("\n\t-D\tDo not free loop device (if a loop device has been used)")
+ USE_FEATURE_MOUNT_LOOP("\n\t-D\tDo not free loop device (if a loop device has been used)")
#define umount_example_usage \
"$ umount /dev/hdc1 \n"
projects / oweals / busybox.git / blobdiff