Move start_stop_daemon to debianutils.

[oweals/busybox.git] / include / usage.h

diff --git a/include/usage.h b/include/usage.h
index d7de5e09ebf4031ffbe07b9b1e4ea27e5d1f20ca..5b7db4150fe28fec3ed3ffec20846bda12c84052 100644 (file)
--- a/include/usage.h
+++ b/include/usage.h
@@ -805,6 +805,81 @@
 #define halt_full_usage \
        "Halt the system."
 
+#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
+#define USAGE_HDPARM_IDENT(a) a
+#else
+#define USAGE_HDPARM_IDENT(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
+#define USAGE_SCAN_HWIF(a) a
+#else
+#define USAGE_SCAN_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
+#define USAGE_UNREGISTER_HWIF(a) a
+#else
+#define USAGE_UNREGISTER_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
+#define USAGE_DRIVE_RESET(a) a
+#else
+#define USAGE_DRIVE_RESET(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
+#define USAGE_TRISTATE_HWIF(a) a
+#else
+#define USAGE_TRISTATE_HWIF(a)
+#endif
+
+#define hdparm_trivial_usage \
+       "[options] [device] .."
+#define hdparm_full_usage \
+       "Options:" \
+       " -a   get/set fs readahead\n" \
+       " -A   set drive read-lookahead flag (0/1)\n" \
+       " -b   get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+       " -B   set Advanced Power Management setting (1-255)\n" \
+       " -c   get/set IDE 32-bit IO setting\n" \
+       " -C   check IDE power mode status\n" \
+       " -d   get/set using_dma flag\n" \
+       " -D   enable/disable drive defect-mgmt\n" \
+       " -f   flush buffer cache for device on exit\n" \
+       " -g   display drive geometry\n" \
+       " -h   display terse usage information\n" \
+       " -i   display drive identification\n" \
+       USAGE_HDPARM_IDENT(" -I   detailed/current information directly from drive\n") \
+       USAGE_HDPARM_IDENT(" -Istdin  similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
+       " -k   get/set keep_settings_over_reset flag (0/1)\n" \
+       " -K   set drive keep_features_over_reset flag (0/1)\n" \
+       " -L   set drive doorlock (0/1) (removable harddisks only)\n" \
+       " -m   get/set multiple sector count\n" \
+       " -n   get/set ignore-write-errors flag (0/1)\n" \
+       " -p   set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+       " -P   set drive prefetch count\n" \
+       " -q   change next setting quietly\n" \
+       " -Q   get/set DMA tagged-queuing depth (if supported)\n" \
+       " -r   get/set readonly flag (DANGEROUS to set)\n" \
+       USAGE_SCAN_HWIF(" -R   register an IDE interface (DANGEROUS)\n") \
+       " -S   set standby (spindown) timeout\n" \
+       " -t   perform device read timings\n" \
+       " -T   perform cache read timings\n" \
+       " -u   get/set unmaskirq flag (0/1)\n" \
+       USAGE_UNREGISTER_HWIF(" -U   un-register an IDE interface (DANGEROUS)\n") \
+       " -v   defaults; same as -mcudkrag for IDE drives\n" \
+       " -V   display program version and exit immediately\n" \
+       USAGE_DRIVE_RESET(" -w   perform device reset (DANGEROUS)\n") \
+       " -W   set drive write-caching flag (0/1) (DANGEROUS)\n" \
+       USAGE_TRISTATE_HWIF(" -x   tristate device for hotswap (0/1) (DANGEROUS)\n") \
+       " -X   set IDE xfer mode (DANGEROUS)\n" \
+       " -y   put IDE drive in standby mode\n" \
+       " -Y   put IDE drive to sleep\n" \
+       " -Z   disable Seagate auto-powersaving mode\n" \
+       " -z   re-read partition table\n"
+
 #ifdef CONFIG_FEATURE_FANCY_HEAD
 #define USAGE_FANCY_HEAD(a) a
 #else
@@ -1823,7 +1898,7 @@
        "/root\n"
 
 #define rdate_trivial_usage \
-       "[OPTION] HOST"
+       "[-sp] HOST"
 #define rdate_full_usage \
        "Get and possibly set the system date and time from a remote HOST.\n\n" \
        "Options:\n" \
@@ -2458,15 +2533,6 @@
        "\t-x\texclude these files\n" \
        "\t-d\textract files into this directory"
 
-#define update_trivial_usage \
-       "[options]"
-#define update_full_usage \
-       "Periodically flushes filesystem buffers.\n\n" \
-       "Options:\n" \
-       "\t-S\tforce use of sync(2) instead of flushing\n" \
-       "\t-s SECS\tcall sync this often (default 30)\n" \
-       "\t-f SECS\tflush some buffers this often (default 5)"
-
 #define uptime_trivial_usage \
        ""
 #define uptime_full_usage \
@@ -2545,9 +2611,11 @@
        "Mon Dec 17 10:31:44 GMT 2000" 
 
 #define watchdog_trivial_usage \
-       "DEV"
+       "[-t <seconds>] DEV"
 #define watchdog_full_usage \
-       "Periodically write to watchdog device DEV"
+       "Periodically write to watchdog device DEV.\n" \
+       "Options:\n" \
+       "\t-t\tTimer period in seconds - default is 30."
 
 #define wc_trivial_usage \
        "[OPTION]... [FILE]..."