-/* vi: set sw=4 ts=4: */
+/* vi: set sw=8 ts=8: */
+/*
+ * This file suffers from chronically incorrect tabification
+ * of messages. Before editing this file:
+ * 1. Switch you editor to 8-space tab mode.
+ * 2. Do not use \t in messages, use real tab character.
+ * 3. Start each source line with message as follows:
+ * |<7 spaces>"text with tabs"....
+ */
+
#ifndef __BB_USAGE_H__
#define __BB_USAGE_H__
#define addgroup_trivial_usage \
- "[-g GID] group_name [user_name]"
+ "[-g GID] group_name [user_name]"
#define addgroup_full_usage \
- "Adds a group to the system\n\n" \
- "Options:\n" \
- "\t-g GID\t\tspecify gid"
+ "Add a group to the system" \
+ "\n\nOptions:\n" \
+ " -g GID Specify gid"
#define adduser_trivial_usage \
- "[OPTIONS] user_name"
+ "[OPTIONS] user_name"
#define adduser_full_usage \
- "Adds a user to the system\n\n" \
- "Options:\n" \
- "\t-h DIR\t\tAssign home directory DIR\n" \
- "\t-g GECOS\tAssign gecos field GECOS\n" \
- "\t-s SHELL\tAssign login shell SHELL\n" \
- "\t-G\t\tAdd the user to existing group GROUP\n" \
- "\t-S\t\tcreate a system user (ignored)\n" \
- "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
- "\t-H\t\tDo not create the home directory"
+ "Add a user to the system" \
+ "\n\nOptions:\n" \
+ " -h DIR Assign home directory DIR\n" \
+ " -g GECOS Assign gecos field GECOS\n" \
+ " -s SHELL Assign login shell SHELL\n" \
+ " -G Add the user to existing group GROUP\n" \
+ " -S Create a system user (ignored)\n" \
+ " -D Do not assign a password (logins still possible via ssh)\n" \
+ " -H Do not create the home directory"
#define adjtimex_trivial_usage \
- "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
+ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
- "Reads and optionally sets system timebase parameters.\n" \
- "See adjtimex(2).\n\n" \
- "Options:\n" \
- "\t-q\t\tquiet mode - do not print\n" \
- "\t-o offset\ttime offset, microseconds\n" \
- "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
- "\t\t\t(positive values make the system clock run fast)\n" \
- "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
- "\t-p timeconstant"
+ "Read and optionally set system timebase parameters.\n" \
+ "See adjtimex(2)." \
+ "\n\nOptions:\n" \
+ " -q Quiet mode - do not print\n" \
+ " -o offset Time offset, microseconds\n" \
+ " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
+ " (positive values make the system clock run fast)\n" \
+ " -t tick Microseconds per tick, usually 10000\n" \
+ " -p timeconstant"
#define ar_trivial_usage \
- "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
+ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
- "Extract or list FILES from an ar archive.\n\n" \
- "Options:\n" \
- "\t-o\t\tpreserve original dates\n" \
- "\t-p\t\textract to stdout\n" \
- "\t-t\t\tlist\n" \
- "\t-x\t\textract\n" \
- "\t-v\t\tverbosely list files processed"
+ "Extract or list FILES from an ar archive" \
+ "\n\nOptions:\n" \
+ " -o Preserve original dates\n" \
+ " -p Extract to stdout\n" \
+ " -t List\n" \
+ " -x Extract\n" \
+ " -v Verbosely list files processed"
+
+#define arp_trivial_usage \
+ "\n" \
+ "[-vn] [-H type] [-i if] -a [hostname]\n" \
+ "[-v] [-i if] -d hostname [pub]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
+ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
+#define arp_full_usage \
+ "Manipulate the system ARP cache" \
+ "\n\nOptions:" \
+ "\n -a Display (all) hosts" \
+ "\n -s Set a new ARP entry" \
+ "\n -d Delete a specified entry" \
+ "\n -v Verbose" \
+ "\n -n Don't resolve names" \
+ "\n -i if Specify network interface (e.g. eth0)" \
+ "\n -D Read <hwaddr> from given device" \
+ "\n -A, -p Specify protocol family" \
+ "\n -H hwtype Specify hardware address type"
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
+ "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
#define arping_full_usage \
- "Ping hosts by ARP requests/replies.\n\n" \
- "Options:\n" \
- "\t-f\t\tQuit on first ARP reply\n" \
- "\t-q\t\tBe quiet\n" \
- "\t-b\t\tKeep broadcasting, don't go unicast\n" \
- "\t-D\t\tDuplicated address detection mode\n" \
- "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
- "\t-A\t\tARP answer mode, update your neighbours\n" \
- "\t-c count\tStop after sending count ARP request packets\n" \
- "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
- "\t-i device\tOutgoing interface name, default is eth0\n" \
- "\t-s sender\tSet specific sender IP address\n" \
- "\ttarget\t\tTarget IP address of ARP request"
+ "Ping hosts by ARP requests/replies" \
+ "\n\nOptions:\n" \
+ " -f Quit on first ARP reply\n" \
+ " -q Be quiet\n" \
+ " -b Keep broadcasting, don't go unicast\n" \
+ " -D Duplicated address detection mode\n" \
+ " -U Unsolicited ARP mode, update your neighbours\n" \
+ " -A ARP answer mode, update your neighbours\n" \
+ " -c count Stop after sending count ARP request packets\n" \
+ " -w timeout Time to wait for ARP reply, in seconds\n" \
+ " -i device Outgoing interface name, default is eth0\n" \
+ " -s sender Set specific sender IP address\n" \
+ " target Target IP address of ARP request"
#define ash_trivial_usage \
- "[FILE]...\n" \
- "or: ash -c command [args]..."
+ "[FILE]...\n" \
+ "or: ash -c command [args]..."
#define ash_full_usage \
- "The ash shell (command interpreter)"
+ "The ash shell (command interpreter)"
#define awk_trivial_usage \
- "[OPTION]... [program-text] [FILE ...]"
+ "[OPTION]... [program-text] [FILE ...]"
#define awk_full_usage \
- "Options:\n" \
- "\t-v var=val\tassign value 'val' to variable 'var'\n" \
- "\t-F sep\t\tuse 'sep' as field separator\n" \
- "\t-f progname\tread program source from file 'progname'"
+ "Options:\n" \
+ " -v var=val Assign value 'val' to variable 'var'\n" \
+ " -F sep Use 'sep' as field separator\n" \
+ " -f progname Read program source from file 'progname'"
#define basename_trivial_usage \
- "FILE [SUFFIX]"
+ "FILE [SUFFIX]"
#define basename_full_usage \
- "Strips directory path and suffixes from FILE.\n" \
- "If specified, also removes any trailing SUFFIX."
+ "Strip directory path and suffixes from FILE.\n" \
+ "If specified, also remove any trailing SUFFIX."
#define basename_example_usage \
- "$ basename /usr/local/bin/foo\n" \
- "foo\n" \
- "$ basename /usr/local/bin/\n" \
- "bin\n" \
- "$ basename /foo/bar.txt .txt\n" \
- "bar"
+ "$ basename /usr/local/bin/foo\n" \
+ "foo\n" \
+ "$ basename /usr/local/bin/\n" \
+ "bin\n" \
+ "$ basename /foo/bar.txt .txt\n" \
+ "bar"
#define bunzip2_trivial_usage \
- "[OPTION]... [FILE]"
+ "[OPTION]... [FILE]"
#define bunzip2_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
- "Options:\n" \
- "\t-c\tWrite output to standard output\n" \
- "\t-f\tForce"
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
+ "\n\nOptions:\n" \
+ " -c Write output to standard output\n" \
+ " -f Force"
#define busybox_notes_usage \
- "Hello world!\n"
+ "Hello world!\n"
#define bzcat_trivial_usage \
- "FILE"
+ "FILE"
#define bzcat_full_usage \
- "Uncompress to stdout."
+ "Uncompress to stdout"
#define unlzma_trivial_usage \
- "[OPTION]... [FILE]"
+ "[OPTION]... [FILE]"
#define unlzma_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
- "Options:\n" \
- "\t-c\tWrite output to standard output\n" \
- "\t-f\tForce"
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
+ "\n\nOptions:\n" \
+ " -c Write output to standard output\n" \
+ " -f Force"
#define lzmacat_trivial_usage \
- "FILE"
+ "FILE"
#define lzmacat_full_usage \
- "Uncompress to stdout."
+ "Uncompress to stdout"
#define cal_trivial_usage \
- "[-jy] [[month] year]"
+ "[-jy] [[month] year]"
#define cal_full_usage \
- "Display a calendar.\n" \
- "\nOptions:\n" \
- "\t-j\tUse julian dates\n" \
- "\t-y\tDisplay the entire year"
+ "Display a calendar" \
+ "\n\nOptions:\n" \
+ " -j Use julian dates\n" \
+ " -y Display the entire year"
#define cat_trivial_usage \
- "[-u] [FILE]..."
+ "[-u] [FILE]..."
#define cat_full_usage \
- "Concatenates FILE(s) and prints them to stdout.\n\n" \
- "Options:\n" \
- "\t-u\tignored since unbuffered i/o is always used"
+ "Concatenate FILE(s) and print them to stdout" \
+ "\n\nOptions:\n" \
+ " -u Ignored since unbuffered i/o is always used"
#define cat_example_usage \
- "$ cat /proc/uptime\n" \
- "110716.72 17.67"
+ "$ cat /proc/uptime\n" \
+ "110716.72 17.67"
#define catv_trivial_usage \
- "[-etv] [FILE]..."
+ "[-etv] [FILE]..."
#define catv_full_usage \
- "Display nonprinting characters as ^x or M-x.\n\n"\
- "\t-e\tEnd each line with $\n" \
- "\t-t\tShow tabs as ^I\n" \
- "\t-v\tDon't use ^x or M-x escapes."
+ "Display nonprinting characters as ^x or M-x" \
+ "\n\nOptions:\n" \
+ " -e End each line with $\n" \
+ " -t Show tabs as ^I\n" \
+ " -v Don't use ^x or M-x escapes"
#define chattr_trivial_usage \
- "[-R] [-+=AacDdijsStTu] [-v version] files..."
+ "[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
- "change file attributes on an ext2 fs\n\n" \
- "Modifiers:\n" \
- "\t-\tremove attributes\n" \
- "\t+\tadd attributes\n" \
- "\t=\tset attributes\n" \
- "Attributes:\n" \
- "\tA\tdon't track atime\n" \
- "\ta\tappend mode only\n" \
- "\tc\tenable compress\n" \
- "\tD\twrite dir contents synchronously\n" \
- "\td\tdo not backup with dump\n" \
- "\ti\tcannot be modified (immutable)\n" \
- "\tj\twrite all data to journal first\n" \
- "\ts\tzero disk storage when deleted\n" \
- "\tS\twrite file contents synchronously\n" \
- "\tt\tdisable tail-merging of partial blocks with other files\n" \
- "\tu\tallow file to be undeleted\n" \
- "Options:\n" \
- "\t-R\trecursively list subdirectories\n" \
- "\t-v\tset the file's version/generation number"
+ "Change file attributes on an ext2 fs\n\n" \
+ "Modifiers:\n" \
+ " - Remove attributes\n" \
+ " + Add attributes\n" \
+ " = Set attributes\n" \
+ "Attributes:\n" \
+ " A Don't track atime\n" \
+ " a Append mode only\n" \
+ " c Enable compress\n" \
+ " D Write dir contents synchronously\n" \
+ " d Do not backup with dump\n" \
+ " i Cannot be modified (immutable)\n" \
+ " j Write all data to journal first\n" \
+ " s Zero disk storage when deleted\n" \
+ " S Write file contents synchronously\n" \
+ " t Disable tail-merging of partial blocks with other files\n" \
+ " u Allow file to be undeleted\n" \
+ "Options:\n" \
+ " -R Recursively list subdirectories\n" \
+ " -v Set the file's version/generation number"
#define chgrp_trivial_usage \
- "[OPTION]... GROUP FILE..."
+ "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage \
- "Change the group membership of each FILE to GROUP.\n" \
- "\nOptions:\n" \
- "\t-R\tChanges files and directories recursively"
+ "Change the group membership of each FILE to GROUP" \
+ "\n\nOptions:\n" \
+ " -R Changes files and directories recursively\n" \
+ " -h Do not dereference symbolic links" \
+ USE_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
+ )
#define chgrp_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chgrp root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chgrp root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
#define chmod_trivial_usage \
- "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
+ "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage \
- "Each MODE is one or more of the letters ugoa, one of the\n" \
- "symbols +-= and one or more of the letters rwxst.\n\n" \
- "Options:\n" \
- "\t-R\tChanges files and directories recursively" \
+ "Each MODE is one or more of the letters ugoa, one of the\n" \
+ "symbols +-= and one or more of the letters rwxst" \
+ "\n\nOptions:" \
+ "\n -R Changes files and directories recursively" \
USE_DESKTOP( \
- "\n\t-c\tList changed files" \
- "\n\t-v\tList all files" \
- "\n\t-f\tHide errors" \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
)
#define chmod_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chmod u+x /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
- "$ chmod 444 /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+ "$ ls -l /tmp/foo\n" \
+ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chmod u+x /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
+ "$ chmod 444 /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chown_trivial_usage \
- "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+ "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
- "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
- "\nOptions:\n" \
- "\t-R\tChanges files and directories recursively\n" \
- "\t-h\tDo not dereference symbolic links" \
+ "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
+ "\n\nOptions:" \
+ "\n -R Changes files and directories recursively" \
+ "\n -h Do not dereference symbolic links" \
USE_DESKTOP( \
- "\n\t-c\tList changed files" \
- "\n\t-v\tList all files" \
- "\n\t-f\tHide errors" \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
)
#define chown_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chown root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chown root.root /tmp/foo\n" \
- "ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chown root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chown root.root /tmp/foo\n" \
+ "ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chpst_trivial_usage \
- "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \
- "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
- "[-p processes] [-f bytes] [-c bytes] prog args"
+ "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \
+ "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
+ "[-p processes] [-f bytes] [-c bytes] prog args"
#define chpst_full_usage \
- "Change the process state and run specified program.\n\n" \
- "-u user[:grp] set uid and gid\n" \
- "-U user[:grp] set environment variables UID and GID\n" \
- "-e dir set environment variables as specified by files\n" \
- " in the directory: file=1st_line_of_file\n" \
- "-/ dir chroot to dir\n" \
- "-n inc add inc to nice value\n" \
- "-m bytes limit data segment, stack segment, locked physical pages,\n" \
- " and total of all segment per process to bytes bytes each\n" \
- "-d bytes limit data segment\n" \
- "-o n limit the number of open file descriptors per process to n\n" \
- "-p n limit number of processes per uid to n\n" \
- "-f bytes limit output file size to bytes bytes\n" \
- "-c bytes limit core file size to bytes bytes\n" \
- "-v verbose\n" \
- "-P run prog in a new process group\n" \
- "-0 close standard input\n" \
- "-1 close standard output\n" \
- "-2 close standard error"
+ "Change the process state and run specified program" \
+ "\n\nOptions:\n" \
+ " -u user[:grp] Set uid and gid\n" \
+ " -U user[:grp] Set environment variables UID and GID\n" \
+ " -e dir Set environment variables as specified by files\n" \
+ " in the directory: file=1st_line_of_file\n" \
+ " -/ dir Chroot to dir\n" \
+ " -n inc Add inc to nice value\n" \
+ " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
+ " and total of all segment per process to bytes bytes each\n" \
+ " -d bytes Limit data segment\n" \
+ " -o n Limit the number of open file descriptors per process to n\n" \
+ " -p n Limit number of processes per uid to n\n" \
+ " -f bytes Limit output file size to bytes bytes\n" \
+ " -c bytes Limit core file size to bytes bytes\n" \
+ " -v Verbose\n" \
+ " -P Run prog in a new process group\n" \
+ " -0 Close standard input\n" \
+ " -1 Close standard output\n" \
+ " -2 Close standard error"
#define setuidgid_trivial_usage \
- "account prog args"
+ "account prog args"
#define setuidgid_full_usage \
- "Sets uid and gid to account's uid and gid, removing all supplementary\n" \
- "groups, then runs prog"
+ "Set uid and gid to account's uid and gid, removing all supplementary\n" \
+ "groups, then run prog"
#define envuidgid_trivial_usage \
- "account prog args"
+ "account prog args"
#define envuidgid_full_usage \
- "Sets $UID to account's uid and $GID to account's gid, then runs prog"
+ "Set $UID to account's uid and $GID to account's gid, then run prog"
#define envdir_trivial_usage \
- "dir prog args"
+ "dir prog args"
#define envdir_full_usage \
- "Sets various environment variables as specified by files\n" \
- "in the directory dir, then runs prog"
+ "Set various environment variables as specified by files\n" \
+ "in the directory dir, then run prog"
#define softlimit_trivial_usage \
- "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
- "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
- "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
+ "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
+ "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
+ "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
#define softlimit_full_usage \
- "Sets soft resource limits as specified by options, then runs prog\n" \
- "\n" \
- "-m n Same as -d n -s n -l n -a n\n" \
- "-d n Limit the data segment per process to n bytes\n" \
- "-s n Limit the stack segment per process to n bytes\n" \
- "-l n Limit the locked physical pages per process to n bytes\n" \
- "-a n Limit the total of all segments per process to n bytes\n" \
- "-o n Limit the number of open file descriptors per process to n\n" \
- "-p n Limit the number of processes per uid to n\n" \
- "Options controlling file sizes:\n" \
- "-f n Limit output file sizes to n bytes\n" \
- "-c n Limit core file sizes to n bytes\n" \
- "Efficiency opts:\n" \
- "-r n Limit the resident set size to n bytes. This limit is not\n" \
- " enforced unless physical memory is full\n" \
- "-t n Limit the CPU time to n seconds. This limit is not enforced\n" \
- " except that the process receives a SIGXCPU signal after n seconds\n" \
- "\n" \
- "Some options may have no effect on some operating systems\n" \
- "n may be =, indicating that soft limit should be set equal to hard limit"
+ "Set soft resource limits, then run prog" \
+ "\n\nOptions:\n" \
+ " -m n Same as -d n -s n -l n -a n\n" \
+ " -d n Limit the data segment per process to n bytes\n" \
+ " -s n Limit the stack segment per process to n bytes\n" \
+ " -l n Limit the locked physical pages per process to n bytes\n" \
+ " -a n Limit the total of all segments per process to n bytes\n" \
+ " -o n Limit the number of open file descriptors per process to n\n" \
+ " -p n Limit the number of processes per uid to n\n" \
+ "Options controlling file sizes:\n" \
+ " -f n Limit output file sizes to n bytes\n" \
+ " -c n Limit core file sizes to n bytes\n" \
+ "Efficiency opts:\n" \
+ " -r n Limit the resident set size to n bytes. This limit is not\n" \
+ " enforced unless physical memory is full\n" \
+ " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \
+ " except that the process receives a SIGXCPU signal after n seconds\n" \
+ "\n" \
+ "Some options may have no effect on some operating systems\n" \
+ "n may be =, indicating that soft limit should be set equal to hard limit"
#define chroot_trivial_usage \
- "NEWROOT [COMMAND...]"
+ "NEWROOT [COMMAND...]"
#define chroot_full_usage \
- "Run COMMAND with root directory set to NEWROOT."
+ "Run COMMAND with root directory set to NEWROOT"
#define chroot_example_usage \
- "$ ls -l /bin/ls\n" \
- "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
- "# mount /dev/hdc1 /mnt -t minix\n" \
- "# chroot /mnt\n" \
- "# ls -l /bin/ls\n" \
- "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
+ "$ ls -l /bin/ls\n" \
+ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
+ "# mount /dev/hdc1 /mnt -t minix\n" \
+ "# chroot /mnt\n" \
+ "# ls -l /bin/ls\n" \
+ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
- "N"
+ "N"
#define chvt_full_usage \
- "Changes the foreground virtual terminal to /dev/ttyN"
+ "Change the foreground virtual terminal to /dev/ttyN"
#define cksum_trivial_usage \
- "FILES..."
+ "FILES..."
#define cksum_full_usage \
- "Calculates the CRC32 checksums of FILES."
+ "Calculate the CRC32 checksums of FILES"
#define clear_trivial_usage \
- ""
+ ""
#define clear_full_usage \
- "Clear screen."
+ "Clear screen"
#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2]"
#define cmp_full_usage \
- "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
- "Options:\n" \
- "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
- "\t\t for all differing bytes\n" \
- "\t-s\tquiet mode - do not print"
+ "Compares FILE1 vs stdin if FILE2 is not specified" \
+ "\n\nOptions:\n" \
+ " -l Write the byte numbers (decimal) and values (octal)\n" \
+ " for all differing bytes\n" \
+ " -s Quiet mode - do not print"
#define comm_trivial_usage \
- "[-123] FILE1 FILE2"
+ "[-123] FILE1 FILE2"
#define comm_full_usage \
- "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \
- "Options:\n" \
- "\t-1\tSuppress lines unique to FILE1\n" \
- "\t-2\tSuppress lines unique to FILE2\n" \
- "\t-3\tSuppress lines common to both files"
+ "Compare FILE1 to FILE2, or to stdin if - is specified" \
+ "\n\nOptions:\n" \
+ " -1 Suppress lines unique to FILE1\n" \
+ " -2 Suppress lines unique to FILE2\n" \
+ " -3 Suppress lines common to both files"
#define bbconfig_trivial_usage \
- ""
+ ""
#define bbconfig_full_usage \
- "Print the config file which built busybox"
+ "Print the config file which built busybox"
#define bbsh_trivial_usage \
- "[FILE]...\n" \
- "or: bbsh -c command [args]..."
+ "[FILE]...\n" \
+ "or: bbsh -c command [args]..."
#define bbsh_full_usage \
- "The bbsh shell (command interpreter)"
+ "The bbsh shell (command interpreter)"
#define cp_trivial_usage \
- "[OPTION]... SOURCE DEST"
+ "[OPTION]... SOURCE DEST"
#define cp_full_usage \
- "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
- "\n" \
- "\t-a\tSame as -dpR\n" \
- "\t-d,-P\tPreserve links\n" \
- "\t-H,-L\tDereference all symlinks (implied by default)\n" \
- "\t-p\tPreserve file attributes if possible\n" \
- "\t-f\tforce, overwrite\n" \
- "\t-i\tinteractive, prompt before overwrite\n" \
- "\t-R,-r\tCopy directories recursively\n" \
- "\t-l,-s\tCreate (sym)links"
+ "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
+ "\n\nOptions:\n" \
+ " -a Same as -dpR\n" \
+ " -d,-P Preserve links\n" \
+ " -H,-L Dereference all symlinks (implied by default)\n" \
+ " -p Preserve file attributes if possible\n" \
+ " -f Force, overwrite\n" \
+ " -i Interactive, prompt before overwrite\n" \
+ " -R,-r Copy directories recursively\n" \
+ " -l,-s Create (sym)links"
#define cpio_trivial_usage \
- "-[dimtuv][F cpiofile]"
+ "-[dimtuv][F cpiofile]"
#define cpio_full_usage \
- "Extract or list files from a cpio archive\n" \
- "Main operation mode:\n" \
- "\td\t\tmake leading directories\n" \
- "\ti\t\textract\n" \
- "\tm\t\tpreserve mtime\n" \
- "\tt\t\tlist\n" \
- "\tv\t\tverbose\n" \
- "\tu\t\tunconditional overwrite\n" \
- "\tF\t\tinput from file"
+ "Extract or list files from a cpio archive\n" \
+ "Main operation mode:\n" \
+ " d Make leading directories\n" \
+ " i Extract\n" \
+ " m Preserve mtime\n" \
+ " t List\n" \
+ " v Verbose\n" \
+ " u Unconditional overwrite\n" \
+ " F Input from file"
#define crond_trivial_usage \
- "-d[#] -c <crondir> -f -b"
+ "-d[#] -c <crondir> -f -b"
#define crond_full_usage \
- "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
- "\t-d num\tdebug level\n" \
- "\t-l num\tlog level (8 - default)\n" \
- "\t-S\tlog to syslogd (default)\n" \
- "\t-L file\tlog to file\n" \
- "\t-f\trun in foreground\n" \
- "\t-b\trun in background (default)\n" \
- "\t-c dir\tworking dir"
+ " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
+ " -d num Debug level\n" \
+ " -l num Log level (8 - default)\n" \
+ " -S Log to syslogd (default)\n" \
+ " -L file Log to file\n" \
+ " -f Run in foreground\n" \
+ " -b Run in background (default)\n" \
+ " -c dir Working dir"
#define crontab_trivial_usage \
- "[-c dir] {file|-}|[-u|-l|-e|-d user]"
+ "[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
- "\tfile <opts> replace crontab from file\n" \
- "\t- <opts> replace crontab from stdin\n" \
- "\t-u user specify user\n" \
- "\t-l [user] list crontab for user\n" \
- "\t-e [user] edit crontab for user\n" \
- "\t-d [user] delete crontab for user\n" \
- "\t-c dir specify crontab directory"
+ " File <opts> replace crontab from file\n" \
+ " - <opts> replace crontab from stdin\n" \
+ " -u user specify user\n" \
+ " -l [user] list crontab for user\n" \
+ " -e [user] edit crontab for user\n" \
+ " -d [user] delete crontab for user\n" \
+ " -c dir specify crontab directory"
#define cut_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define cut_full_usage \
- "Prints selected fields from each input FILE to standard output.\n\n" \
- "Options:\n" \
- "\t-b LIST\t\tOutput only bytes from LIST\n" \
- "\t-c LIST\t\tOutput only characters from LIST\n" \
- "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
- "\t-s\t\tOutput only the lines containing delimiter\n" \
- "\t-f N\t\tPrint only these fields\n" \
- "\t-n\t\tIgnored"
+ "Print selected fields from each input FILE to standard output" \
+ "\n\nOptions:\n" \
+ " -b LIST Output only bytes from LIST\n" \
+ " -c LIST Output only characters from LIST\n" \
+ " -d CHAR Use CHAR instead of tab as the field delimiter\n" \
+ " -s Output only the lines containing delimiter\n" \
+ " -f N Print only these fields\n" \
+ " -n Ignored"
#define cut_example_usage \
- "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
- "Hello\n" \
- "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
- "world\n"
+ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
+ "Hello\n" \
+ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
+ "world\n"
#define date_trivial_usage \
- "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
+ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
- "Displays the current time in the given FORMAT, or sets the system date.\n" \
- "\nOptions:\n" \
- "\t-R\t\tOutputs RFC-822 compliant date string\n" \
- "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
-USE_FEATURE_DATE_ISOFMT( \
- "\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \
- "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
- "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
- "\t\t\ttime to the indicated precision\n" \
- "\t-D hint\t\tUse 'hint' as date format, via strptime()\n" \
-) \
- "\t-s\t\tSets time described by STRING\n" \
- "\t-r FILE\t\tDisplays the last modification time of FILE\n" \
- "\t-u\t\tPrints or sets Coordinated Universal Time"
+ "Display current time in the given FORMAT, or set system date" \
+ "\n\nOptions:\n" \
+ " -R Outputs RFC-822 compliant date string\n" \
+ " -d STRING Displays time described by STRING, not 'now'\n" \
+ USE_FEATURE_DATE_ISOFMT( \
+ " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \
+ " TIMESPEC='date' (or missing) for date only,\n" \
+ " 'hours', 'minutes', or 'seconds' for date and,\n" \
+ " time to the indicated precision\n" \
+ " -D hint Use 'hint' as date format, via strptime()\n" \
+ ) \
+ " -s Sets time described by STRING\n" \
+ " -r FILE Displays the last modification time of FILE\n" \
+ " -u Prints or sets Coordinated Universal Time"
#define date_example_usage \
- "$ date\n" \
- "Wed Apr 12 18:52:41 MDT 2000\n"
+ "$ date\n" \
+ "Wed Apr 12 18:52:41 MDT 2000\n"
#define dc_trivial_usage \
- "expression ..."
+ "expression ..."
#define dc_full_usage \
- "This is a Tiny RPN calculator that understands the\n" \
- "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
- "**, exp, and, or, not, eor.\n" \
- "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
- "\nOptions:\n" \
- "p - Prints the value on the top of the stack, without altering the stack\n" \
- "f - Prints the entire contents of the stack without altering anything\n" \
- "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
- " Only 10 and 16 are supported"
+ "This is a Tiny RPN calculator that understands the\n" \
+ "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
+ "**, exp, and, or, not, eor.\n" \
+ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \
+ "\n\nOptions:\n" \
+ "p - Prints the value on the top of the stack, without altering the stack\n" \
+ "f - Prints the entire contents of the stack without altering anything\n" \
+ "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
+ " Only 10 and 16 are supported"
#define dc_example_usage \
- "$ dc 2 2 + p\n" \
- "4\n" \
- "$ dc 8 8 \\* 2 2 + / p\n" \
- "16\n" \
- "$ dc 0 1 and p\n" \
- "0\n" \
- "$ dc 0 1 or p\n" \
- "1\n" \
- "$ echo 72 9 div 8 mul p | dc\n" \
- "64\n"
+ "$ dc 2 2 + p\n" \
+ "4\n" \
+ "$ dc 8 8 \\* 2 2 + / p\n" \
+ "16\n" \
+ "$ dc 0 1 and p\n" \
+ "0\n" \
+ "$ dc 0 1 or p\n" \
+ "1\n" \
+ "$ echo 72 9 div 8 mul p | dc\n" \
+ "64\n"
#define dd_trivial_usage \
- "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
- "\t [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
+ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
+ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
#define dd_full_usage \
- "Copy a file, converting and formatting according to options\n\n" \
- "\tif=FILE\t\tread from FILE instead of stdin\n" \
- "\tof=FILE\t\twrite to FILE instead of stdout\n" \
- "\tbs=N\t\tread and write N bytes at a time\n" \
- USE_FEATURE_DD_IBS_OBS("\tibs=N\t\tread N bytes at a time\n") \
- USE_FEATURE_DD_IBS_OBS("\tobs=N\t\twrite N bytes at a time\n") \
- "\tcount=N\t\tcopy only N input blocks\n" \
- "\tskip=N\t\tskip N input blocks\n" \
- "\tseek=N\t\tskip N output blocks\n" \
+ "Copy a file with converting and formatting" \
+ "\n\nOptions:\n" \
+ " if=FILE Read from FILE instead of stdin\n" \
+ " of=FILE Write to FILE instead of stdout\n" \
+ " bs=N Read and write N bytes at a time\n" \
USE_FEATURE_DD_IBS_OBS( \
- "\tconv=notrunc\tdon't truncate output file\n" \
- "\tconv=noerror\tcontinue after read errors\n" \
- "\tconv=sync\tpad blocks with zeros\n" \
- ) \
- "\n" \
- "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
- "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
+ " ibs=N Read N bytes at a time\n") \
+ USE_FEATURE_DD_IBS_OBS( \
+ " obs=N Write N bytes at a time\n") \
+ " count=N Copy only N input blocks\n" \
+ " skip=N Skip N input blocks\n" \
+ " seek=N Skip N output blocks\n" \
+ USE_FEATURE_DD_IBS_OBS( \
+ " conv=notrunc Don't truncate output file\n" \
+ " conv=noerror Continue after read errors\n" \
+ " conv=sync Pad blocks with zeros\n") \
+ "\n" \
+ "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
+ "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
#define dd_example_usage \
- "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
- "4+0 records in\n" \
- "4+0 records out\n"
+ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
+ "4+0 records in\n" \
+ "4+0 records out\n"
#define deallocvt_trivial_usage \
- "[N]"
+ "[N]"
#define deallocvt_full_usage \
- "Deallocate unused virtual terminal /dev/ttyN"
+ "Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
- "GROUP"
+ "GROUP"
#define delgroup_full_usage \
- "Deletes group GROUP from the system"
+ "Delete group GROUP from the system"
#define deluser_trivial_usage \
- "USER"
+ "USER"
#define deluser_full_usage \
- "Deletes user USER from the system"
+ "Delete user USER from the system"
#define devfsd_trivial_usage \
- "mntpnt [-v]" \
+ "mntpnt [-v]" \
USE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
- "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
- "\nOptions:\n" \
- "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
- "\t-v\tPrint the protocol version numbers for devfsd\n" \
- "\t\tand the kernel-side protocol version and exits." \
- USE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
- "\t-np\tExit after parsing the configuration file\n" \
- "\t\tand processing synthetic REGISTER events.\n" \
- "\t\tDo not poll for events.")
+ "Manage devfs permissions and old device name symlinks" \
+ "\n\nOptions:" \
+ "\n mntpnt The mount point where devfs is mounted" \
+ "\n -v Print the protocol version numbers for devfsd" \
+ "\n and the kernel-side protocol version and exits" \
+ USE_DEVFSD_FG_NP( \
+ "\n -fg Run the daemon in the foreground" \
+ "\n -np Exit after parsing the configuration file" \
+ "\n and processing synthetic REGISTER events," \
+ "\n do not poll for events")
#define df_trivial_usage \
- "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
+ "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
#define df_full_usage \
- "Print the filesystem space used and space available.\n\n" \
- "Options:\n" \
+ "Print the filesystem space used and space available" \
+ "\n\nOptions:\n" \
USE_FEATURE_HUMAN_READABLE( \
- "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
- "\t-m\tprint sizes in megabytes\n" \
- "\t-k\tprint sizes in kilobytes(default)" \
- ) \
- SKIP_FEATURE_HUMAN_READABLE("\n\t-k\tignored")
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Print sizes in megabytes\n" \
+ " -k Print sizes in kilobytes(default)") \
+ SKIP_FEATURE_HUMAN_READABLE( \
+ "\n -k Ignored")
#define df_example_usage \
- "$ df\n" \
- "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 8690864 8553540 137324 98% /\n" \
- "/dev/sda1 64216 36364 27852 57% /boot\n" \
- "$ df /dev/sda3\n" \
- "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 8690864 8553540 137324 98% /\n"
+ "$ df\n" \
+ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 8690864 8553540 137324 98% /\n" \
+ "/dev/sda1 64216 36364 27852 57% /boot\n" \
+ "$ df /dev/sda3\n" \
+ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 8690864 8553540 137324 98% /\n"
+
+#define dhcprelay_trivial_usage \
+ "[client_device_list] [server_device]"
+#define dhcprelay_full_usage \
+ "Relay dhcp requests from client devices to server device"
+
+#define dhcprelay_trivial_usage \
+ "[client_device_list] [server_device]"
+#define dhcprelay_full_usage \
+ "Relay dhcp requests from client devices to server device"
#define diff_trivial_usage \
- "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
+ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage \
- "Compare files line by line and output the differences between them.\n" \
- "This diff implementation only supports unified diffs.\n\n" \
- "Options:\n" \
- "\t-a\tTreat all files as text\n" \
- "\t-b\tIgnore changes in the amount of whitespace\n" \
- "\t-d\tTry hard to find a smaller set of changes\n" \
- "\t-i\tIgnore case differences\n" \
- "\t-L\tUse LABEL instead of the filename in the unified header\n" \
- "\t-N\tTreat absent files as empty\n" \
- "\t-q\tOutput only whether files differ\n" \
- "\t-r\tRecursively compare any subdirectories\n" \
- "\t-S\tStart with FILE when comparing directories\n" \
- "\t-T\tMake tabs line up by prefixing a tab when necessary\n" \
- "\t-s\tReport when two files are the same\n" \
- "\t-t\tExpand tabs to spaces in output\n" \
- "\t-U\tOutput LINES lines of context\n" \
- "\t-w\tIgnore all whitespace\n"
+ "Compare files line by line and output the differences between them.\n" \
+ "This diff implementation only supports unified diffs." \
+ "\n\nOptions:\n" \
+ " -a Treat all files as text\n" \
+ " -b Ignore changes in the amount of whitespace\n" \
+ " -d Try hard to find a smaller set of changes\n" \
+ " -i Ignore case differences\n" \
+ " -L Use LABEL instead of the filename in the unified header\n" \
+ " -N Treat absent files as empty\n" \
+ " -q Output only whether files differ\n" \
+ " -r Recursively compare subdirectories\n" \
+ " -S Start with FILE when comparing directories\n" \
+ " -T Make tabs line up by prefixing a tab when necessary\n" \
+ " -s Report when two files are the same\n" \
+ " -t Expand tabs to spaces in output\n" \
+ " -U Output LINES lines of context\n" \
+ " -w Ignore all whitespace"
#define dirname_trivial_usage \
- "FILENAME"
+ "FILENAME"
#define dirname_full_usage \
- "Strips non-directory suffix from FILENAME"
+ "Strip non-directory suffix from FILENAME"
#define dirname_example_usage \
- "$ dirname /tmp/foo\n" \
- "/tmp\n" \
- "$ dirname /tmp/foo/\n" \
- "/tmp\n"
+ "$ dirname /tmp/foo\n" \
+ "/tmp\n" \
+ "$ dirname /tmp/foo/\n" \
+ "/tmp\n"
#define dmesg_trivial_usage \
- "[-c] [-n LEVEL] [-s SIZE]"
+ "[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
- "Prints or controls the kernel ring buffer\n\n" \
- "Options:\n" \
- "\t-c\t\tClears the ring buffer's contents after printing\n" \
- "\t-n LEVEL\tSets console logging level\n" \
- "\t-s SIZE\t\tUse a buffer of size SIZE"
+ "Print or control the kernel ring buffer" \
+ "\n\nOptions:\n" \
+ " -c Clears the ring buffer's contents after printing\n" \
+ " -n LEVEL Sets console logging level\n" \
+ " -s SIZE Use a buffer of size SIZE"
#define dnsd_trivial_usage \
- "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
+ "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
- "Small and static DNS server daemon\n\n" \
- "Options:\n" \
- "\t-c\t\tconfig filename\n" \
- "\t-t\t\tTTL in seconds\n" \
- "\t-p\t\tlistening port\n" \
- "\t-i\t\tlistening iface ip (default all)\n" \
- "\t-d\t\tdaemonize"
+ "Small and static DNS server daemon" \
+ "\n\nOptions:\n" \
+ " -c Config filename\n" \
+ " -t TTL in seconds\n" \
+ " -p Listening port\n" \
+ " -i Listening iface ip (default all)\n" \
+ " -d Daemonize"
#define dos2unix_trivial_usage \
- "[option] [FILE]"
+ "[option] [FILE]"
#define dos2unix_full_usage \
- "Converts FILE from dos format to unix format. When no option\n" \
- "is given, the input is converted to the opposite output format.\n" \
- "When no file is given, uses stdin for input and stdout for output.\n\n" \
- "Options:\n" \
- "\t-u\toutput will be in UNIX format\n" \
- "\t-d\toutput will be in DOS format"
+ "Convert FILE from dos format to unix format. When no option\n" \
+ "is given, the input is converted to the opposite output format.\n" \
+ "When no file is given, use stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define dpkg_trivial_usage \
- "[-ilCPru] [-F option] package_name"
+ "[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
- "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
- "Options:\n" \
- "\t-i\t\tInstall the package\n" \
- "\t-l\t\tList of installed packages\n" \
- "\t-C\t\tConfigure an unpackaged package\n" \
- "\t-F depends\tIgnore dependency problems\n" \
- "\t-P\t\tPurge all files of a package\n" \
- "\t-r\t\tRemove all but the configuration files for a package\n" \
- "\t-u\t\tUnpack a package, but don't configure it"
+ "Install, remove and manage Debian packages" \
+ "\n\nOptions:\n" \
+ " -i Install the package\n" \
+ " -l List of installed packages\n" \
+ " -C Configure an unpackaged package\n" \
+ " -F depends Ignore dependency problems\n" \
+ " -P Purge all files of a package\n" \
+ " -r Remove all but the configuration files for a package\n" \
+ " -u Unpack a package, but don't configure it"
#define dpkg_deb_trivial_usage \
- "[-cefxX] FILE [argument]"
+ "[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on Debian packages (.debs)\n\n" \
- "Options:\n" \
- "\t-c\tList contents of filesystem tree\n" \
- "\t-e\tExtract control files to [argument] directory\n" \
- "\t-f\tDisplay control field name starting with [argument]\n" \
- "\t-x\tExtract packages filesystem tree to directory\n" \
- "\t-X\tVerbose extract"
+ "Perform actions on Debian packages (.debs)" \
+ "\n\nOptions:\n" \
+ " -c List contents of filesystem tree\n" \
+ " -e Extract control files to [argument] directory\n" \
+ " -f Display control field name starting with [argument]\n" \
+ " -x Extract packages filesystem tree to directory\n" \
+ " -X Verbose extract"
#define dpkg_deb_example_usage \
- "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
+ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
#define du_trivial_usage \
- "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
+ "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
#define du_full_usage \
- "Summarizes disk space used for each FILE and/or directory.\n" \
- "Disk space is printed in units of " \
+ "Summarize disk space used for each FILE and/or directory.\n" \
+ "Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
- " bytes.\n\n" \
- "Options:\n" \
- "\t-a\tshow sizes of files in addition to directories\n" \
- "\t-H\tfollow symbolic links that are FILE command line args\n" \
- "\t-L\tfollow all symbolic links encountered\n" \
- "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
- "\t-c\toutput a grand total\n" \
- "\t-l\tcount sizes many times if hard linked\n" \
- "\t-s\tdisplay only a total for each argument\n" \
- "\t-x\tskip directories on different filesystems\n" \
+ " bytes." \
+ "\n\nOptions:\n" \
+ " -a Show sizes of files in addition to directories\n" \
+ " -H Follow symbolic links that are FILE command line args\n" \
+ " -L Follow all symbolic links encountered\n" \
+ " -d N Limit output to directories (and files with -a) of depth < N\n" \
+ " -c Output a grand total\n" \
+ " -l Count sizes many times if hard linked\n" \
+ " -s Display only a total for each argument\n" \
+ " -x Skip directories on different filesystems\n" \
USE_FEATURE_HUMAN_READABLE( \
- "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
- "\t-m\tprint sizes in megabytes\n" \
+ " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Print sizes in megabytes\n" \
) \
- "\t-k\tprint sizes in kilobytes" \
+ " -k Print sizes in kilobytes" \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
#define du_example_usage \
- "$ du\n" \
- "16 ./CVS\n" \
- "12 ./kernel-patches/CVS\n" \
- "80 ./kernel-patches\n" \
- "12 ./tests/CVS\n" \
- "36 ./tests\n" \
- "12 ./scripts/CVS\n" \
- "16 ./scripts\n" \
- "12 ./docs/CVS\n" \
- "104 ./docs\n" \
- "2417 .\n"
+ "$ du\n" \
+ "16 ./CVS\n" \
+ "12 ./kernel-patches/CVS\n" \
+ "80 ./kernel-patches\n" \
+ "12 ./tests/CVS\n" \
+ "36 ./tests\n" \
+ "12 ./scripts/CVS\n" \
+ "16 ./scripts\n" \
+ "12 ./docs/CVS\n" \
+ "104 ./docs\n" \
+ "2417 .\n"
#define dumpkmap_trivial_usage \
- "> keymap"
+ "> keymap"
#define dumpkmap_full_usage \
- "Prints out a binary keyboard translation table to standard output."
+ "Print out a binary keyboard translation table to standard output"
#define dumpkmap_example_usage \
- "$ dumpkmap > keymap\n"
+ "$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
- "[-r|-a] [-f LEASEFILE]"
+ "[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
- "Displays the DHCP leases granted by udhcpd.\n\n" \
- "Options:\n" \
- "\t-f,\t--file=FILENAME\tLeases file to load\n" \
- "\t-r,\t--remaining\tInterpret lease times as time remaining\n" \
- "\t-a,\t--absolute\tInterpret lease times as expire time"
+ "Display DHCP leases granted by udhcpd" \
+ "\n\nOptions:\n" \
+ " -f, --file=FILENAME Leases file to load\n" \
+ " -r, --remaining Interpret lease times as time remaining\n" \
+ " -a, --absolute Interpret lease times as expire time"
#define e2fsck_trivial_usage \
- "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
- "[-I inode_buffer_blocks] [-P process_inode_size] " \
- "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
- "[-E extended-options] device"
+ "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
+ "[-I inode_buffer_blocks] [-P process_inode_size] " \
+ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
+ "[-E extended-options] device"
#define e2fsck_full_usage \
- "Check a Linux ext2/ext3 file system.\n\n" \
- "Options:\n" \
- "\t-p\tAutomatic repair (no questions)\n" \
- "\t-n\tMake no changes to the filesystem\n" \
- "\t-y\tAssume 'yes' to all questions\n" \
- "\t-c\tCheck for bad blocks and add them to the badblock list\n" \
- "\t-f\tForce checking even if filesystem is marked clean\n" \
- "\t-v\tBe verbose\n" \
- "\t-b superblock\tUse alternative superblock\n" \
- "\t-B blocksize\tForce blocksize when looking for superblock\n" \
- "\t-j journal\tSet location of the external journal\n" \
- "\t-l file\tAdd to badblocks list\n" \
- "\t-L file\tSet badblocks list"
+ "Check ext2/ext3 file system" \
+ "\n\nOptions:\n" \
+ " -p Automatic repair (no questions)\n" \
+ " -n Make no changes to the filesystem\n" \
+ " -y Assume 'yes' to all questions\n" \
+ " -c Check for bad blocks and add them to the badblock list\n" \
+ " -f Force checking even if filesystem is marked clean\n" \
+ " -v Be verbose\n" \
+ " -b superblock Use alternative superblock\n" \
+ " -B blocksize Force blocksize when looking for superblock\n" \
+ " -j journal Set location of the external journal\n" \
+ " -l file Add to badblocks list\n" \
+ " -L file Set badblocks list"
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
- "Prints the specified ARGs to stdout\n\n" \
+ "Print the specified ARGs to stdout" \
USE_FEATURE_FANCY_ECHO( \
- "Options:\n" \
- "\t-n\tsuppress trailing newline\n" \
- "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
- "\t-E\tdisable interpretation of backslash-escaped characters" \
+ "\n\nOptions:\n" \
+ " -n Suppress trailing newline\n" \
+ " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
+ " -E Disable interpretation of backslash-escaped characters" \
)
#define echo_example_usage \
- "$ echo \"Erik is cool\"\n" \
- "Erik is cool\n" \
+ "$ echo \"Erik is cool\"\n" \
+ "Erik is cool\n" \
USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
- "Erik\n" \
- "is\n" \
- "cool\n" \
- "$ echo \"Erik\\nis\\ncool\"\n" \
- "Erik\\nis\\ncool\n")
+ "Erik\n" \
+ "is\n" \
+ "cool\n" \
+ "$ echo \"Erik\\nis\\ncool\"\n" \
+ "Erik\\nis\\ncool\n")
#define eject_trivial_usage \
- "[-t] [-T] [DEVICE]"
+ "[-t] [-T] [DEVICE]"
#define eject_full_usage \
- "Eject specified DEVICE (or default /dev/cdrom).\n\n" \
- "Options:\n" \
- "\t-t\tclose tray\n" \
- "\t-T\topen/close tray (toggle)"
+ "Eject specified DEVICE (or default /dev/cdrom)" \
+ "\n\nOptions:\n" \
+ " -t Close tray\n" \
+ " -T Open/close tray (toggle)"
#define ed_trivial_usage ""
#define ed_full_usage ""
#define env_trivial_usage \
- "[-iu] [-] [name=value]... [command]"
+ "[-iu] [-] [name=value]... [command]"
#define env_full_usage \
- "Prints the current environment or runs a program after setting\n" \
- "up the specified environment.\n\n" \
- "Options:\n" \
- "\t-, -i\tstart with an empty environment\n" \
- "\t-u\tremove variable from the environment"
+ "Print the current environment or run a program after setting\n" \
+ "up the specified environment" \
+ "\n\nOptions:\n" \
+ " -, -i Start with an empty environment\n" \
+ " -u Remove variable from the environment"
#define ether_wake_trivial_usage \
- "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
+ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage \
- "Send a magic packet to wake up sleeping machines.\n" \
- "MAC must be a station address (00:11:22:33:44:55) or\n" \
- " a hostname with a known 'ethers' entry.\n\n" \
- "Options:\n" \
- "\t-b\t\tSend wake-up packet to the broadcast address\n" \
- "\t-i iface\tUse interface ifname instead of the default \"eth0\"\n" \
- "\t-p pass\tAppend the four or six byte password PW to the packet"
+ "Send a magic packet to wake up sleeping machines.\n" \
+ "MAC must be a station address (00:11:22:33:44:55) or\n" \
+ "a hostname with a known 'ethers' entry." \
+ "\n\nOptions:\n" \
+ " -b Send wake-up packet to the broadcast address\n" \
+ " -i iface Use interface ifname instead of the default \"eth0\"\n" \
+ " -p pass Append the four or six byte password PW to the packet"
#define expr_trivial_usage \
- "EXPRESSION"
+ "EXPRESSION"
#define expr_full_usage \
- "Prints the value of EXPRESSION to standard output.\n\n" \
- "EXPRESSION may be:\n" \
- "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
- "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
- "\tARG1 < ARG2 ARG1 is less than ARG2\n" \
- "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
- "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \
- "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
- "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
- "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \
- "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
- "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
- "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
- "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
- "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
- "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
- "\tmatch STRING REGEXP same as STRING : REGEXP\n" \
- "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
- "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \
- "\t or 0\n" \
- "\tlength STRING length of STRING\n" \
- "\tquote TOKEN interpret TOKEN as a string, even if\n" \
- "\t it is a keyword like `match' or an\n" \
- "\t operator like `/'\n" \
- "\t( EXPRESSION ) value of EXPRESSION\n\n" \
- "Beware that many operators need to be escaped or quoted for shells.\n" \
- "Comparisons are arithmetic if both ARGs are numbers, else\n" \
- "lexicographical. Pattern matches return the string matched between\n" \
- "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
- "of characters matched or 0."
-
+ "Print the value of EXPRESSION to standard output.\n\n" \
+ "EXPRESSION may be:\n" \
+ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
+ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
+ " ARG1 < ARG2 ARG1 is less than ARG2\n" \
+ " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
+ " ARG1 = ARG2 ARG1 is equal to ARG2\n" \
+ " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
+ " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
+ " ARG1 > ARG2 ARG1 is greater than ARG2\n" \
+ " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
+ " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
+ " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
+ " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
+ " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
+ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
+ " match STRING REGEXP Same as STRING : REGEXP\n" \
+ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
+ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
+ " length STRING Length of STRING\n" \
+ " quote TOKEN Interpret TOKEN as a string, even if\n" \
+ " it is a keyword like 'match' or an\n" \
+ " operator like '/'\n" \
+ " (EXPRESSION) Value of EXPRESSION\n\n" \
+ "Beware that many operators need to be escaped or quoted for shells.\n" \
+ "Comparisons are arithmetic if both ARGs are numbers, else\n" \
+ "lexicographical. Pattern matches return the string matched between\n" \
+ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
+ "of characters matched or 0."
+
+#if 0 /* bloaty */
+#define fakeidentd_trivial_usage \
+ "[-b ip] [STRING]"
+#define fakeidentd_full_usage \
+ "Return a set string to auth requests" \
+ "\n\nOptions:\n" \
+ " -b Bind to ip address\n" \
+ " STRING The ident answer string (default is nobody)"
+#else /* inetd-only */
#define fakeidentd_trivial_usage \
- "[-b ip] [STRING]"
+ "[username]"
#define fakeidentd_full_usage \
- "Returns a set string to auth requests\n\n" \
- "\t-b\tBind to ip address\n" \
- "\tSTRING\tThe ident answer string (default is nobody)"
+ "Return a (faked) ident response.\n" \
+ "This applet is meant to run from inetd.\n" \
+ "Optional argument is the username to return (default is 'nobody')."
+#endif
#define false_trivial_usage \
- ""
+ ""
#define false_full_usage \
- "Return an exit code of FALSE (1)."
+ "Return an exit code of FALSE (1)"
#define false_example_usage \
- "$ false\n" \
- "$ echo $?\n" \
- "1\n"
+ "$ false\n" \
+ "$ echo $?\n" \
+ "1\n"
#define fbset_trivial_usage \
- "[options] [mode]"
+ "[options] [mode]"
#define fbset_full_usage \
- "Show and modify frame buffer settings"
+ "Show and modify frame buffer settings"
#define fbset_example_usage \
- "$ fbset\n" \
- "mode \"1024x768-76\"\n" \
- "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
- "\tgeometry 1024 768 1024 768 16\n" \
- "\ttimings 12714 128 32 16 4 128 4\n" \
- "\taccel false\n" \
- "\trgba 5/11,6/5,5/0,0/0\n" \
- "endmode\n"
+ "$ fbset\n" \
+ "mode \"1024x768-76\"\n" \
+ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
+ " geometry 1024 768 1024 768 16\n" \
+ " timings 12714 128 32 16 4 128 4\n" \
+ " accel false\n" \
+ " rgba 5/11,6/5,5/0,0/0\n" \
+ "endmode\n"
#define fdflush_trivial_usage \
- "DEVICE"
+ "DEVICE"
#define fdflush_full_usage \
- "Forces floppy disk drive to detect disk change"
+ "Force floppy disk drive to detect disk change"
#define fdformat_trivial_usage \
- "[-n] DEVICE"
+ "[-n] DEVICE"
#define fdformat_full_usage \
- "Low-level formats a floppy disk\n\n" \
- "Options:\n" \
- "\t-n\tDon't verify after format"
+ "Format floppy disk" \
+ "\n\nOptions:\n" \
+ " -n Don't verify after format"
#define fdisk_trivial_usage \
- "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
+ "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
- "Change partition table\n" \
- "Options:\n" \
- "\t-l List partition table(s)\n" \
- "\t-u Give Start and End in sector (instead of cylinder) units\n" \
- "\t-s PARTITION Give partition size(s) in blocks\n" \
- "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
- "\t-C CYLINDERS Set the number of cylinders\n" \
- "\t-H HEADS Set the number of heads\n" \
- "\t-S SECTORS Set the number of sectors\n" \
- "\t-v Give fdisk version"
+ "Change partition table" \
+ "\n\nOptions:\n" \
+ " -l List partition table(s)\n" \
+ " -u Give Start and End in sector (instead of cylinder) units\n" \
+ " -s PARTITION Give partition size(s) in blocks\n" \
+ " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \
+ " -C CYLINDERS Set the number of cylinders\n" \
+ " -H HEADS Set the number of heads\n" \
+ " -S SECTORS Set the number of sectors\n" \
+ " -v Give fdisk version"
#define find_trivial_usage \
- "[PATH...] [EXPRESSION]"
+ "[PATH...] [EXPRESSION]"
#define find_full_usage \
- "Search for files in a directory hierarchy. The default PATH is\n" \
- "the current directory; default EXPRESSION is '-print'\n" \
- "\nEXPRESSION may consist of:\n" \
- "\t-follow\t\tDereference symbolic links\n" \
- "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN\n" \
- "\t-print\t\tPrint (default and assumed)\n" \
+ "Search for files in a directory hierarchy. The default PATH is\n" \
+ "the current directory; default EXPRESSION is '-print'\n" \
+ "\nEXPRESSION may consist of:\n" \
+ " -follow Dereference symbolic links\n" \
+ " -name PATTERN File name (leading directories removed) matches PATTERN\n" \
+ " -print Print (default and assumed)" \
USE_FEATURE_FIND_PRINT0( \
- "\t-print0\t\tDelimit output with null characters rather than\n\t\t\tnewlines" \
-) USE_FEATURE_FIND_TYPE( \
- "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
-) USE_FEATURE_FIND_PERM( \
- "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
-) USE_FEATURE_FIND_MTIME( \
- "\n\t-mtime DAYS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
-) USE_FEATURE_FIND_MMIN( \
- "\n\t-mmin MINS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) minutes" \
-) USE_FEATURE_FIND_NEWER( \
- "\n\t-newer FILE\tModified time is more recent than FILE's" \
-) USE_FEATURE_FIND_INUM( \
- "\n\t-inum N\t\tFile has inode number N" \
-) USE_FEATURE_FIND_EXEC( \
- "\n\t-exec CMD\tExecute CMD with all instances of {} replaced by the" \
- "\n\t\t\tfiles matching EXPRESSION")
+ "\n -print0 Delimit output with null characters rather than" \
+ "\n newlines" \
+ ) USE_FEATURE_FIND_TYPE( \
+ "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \
+ ) USE_FEATURE_FIND_PERM( \
+ "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \
+ "\n or exactly (NNN)" \
+ ) USE_FEATURE_FIND_MTIME( \
+ "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \
+ "\n Or exactly (N) days" \
+ ) USE_FEATURE_FIND_MMIN( \
+ "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
+ "\n or exactly (N) minutes" \
+ ) USE_FEATURE_FIND_NEWER( \
+ "\n -newer FILE Modified time is more recent than FILE's" \
+ ) USE_FEATURE_FIND_INUM( \
+ "\n -inum N File has inode number N" \
+ ) USE_FEATURE_FIND_EXEC( \
+ "\n -exec CMD Execute CMD with all instances of {} replaced by the" \
+ "\n files matching EXPRESSION" \
+ ) USE_DESKTOP( \
+ "\n -size N File size is N" \
+ "\n -prune Stop traversing current subtree" \
+ "\n (expr) Group" \
+ )
#define find_example_usage \
- "$ find / -name passwd\n" \
- "/etc/passwd\n"
+ "$ find / -name passwd\n" \
+ "/etc/passwd\n"
#define fold_trivial_usage \
- "[-bs] [-w WIDTH] [FILE]"
+ "[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage \
- "Wrap input lines in each FILE (standard input by default), writing to\n" \
- "standard output.\n\n" \
- "Options:\n" \
- "\t-b\tcount bytes rather than columns\n" \
- "\t-s\tbreak at spaces\n" \
- "\t-w\tuse WIDTH columns instead of 80"
+ "Wrap input lines in each FILE (standard input by default), writing to\n" \
+ "standard output" \
+ "\n\nOptions:\n" \
+ " -b Count bytes rather than columns\n" \
+ " -s Break at spaces\n" \
+ " -w Use WIDTH columns instead of 80"
#define free_trivial_usage \
- ""
+ ""
#define free_full_usage \
- "Displays the amount of free and used system memory"
+ "Display the amount of free and used system memory"
#define free_example_usage \
- "$ free\n" \
- " total used free shared buffers\n" \
- " Mem: 257628 248724 8904 59644 93124\n" \
- " Swap: 128516 8404 120112\n" \
- "Total: 386144 257128 129016\n" \
+ "$ free\n" \
+ " total used free shared buffers\n" \
+ " Mem: 257628 248724 8904 59644 93124\n" \
+ " Swap: 128516 8404 120112\n" \
+ "Total: 386144 257128 129016\n" \
#define freeramdisk_trivial_usage \
- "DEVICE"
+ "DEVICE"
#define freeramdisk_full_usage \
- "Frees all memory used by the specified ramdisk."
+ "Free all memory used by the specified ramdisk"
#define freeramdisk_example_usage \
- "$ freeramdisk /dev/ram2\n"
+ "$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
- "[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]"
+ "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]"
#define fsck_full_usage \
- "Check and repair filesystems.\n\n" \
- "Options:\n" \
- "\t-A\tWalk /etc/fstab and check all filesystems\n" \
- "\t-N\tDon't execute, just show what would be done\n" \
- "\t-P\tWhen using -A, check filesystems in parallel\n" \
- "\t-R\tWhen using -A, skip the root filesystem\n" \
- "\t-T\tDon't show title on startup\n" \
- "\t-V\tVerbose mode\n" \
- "\t-C\tWrite status information to specified filedescriptor\n" \
- "\t-t\tList of filesystem types to check"
+ "Check and repair filesystems" \
+ "\n\nOptions:\n" \
+ " -A Walk /etc/fstab and check all filesystems\n" \
+ " -N Don't execute, just show what would be done\n" \
+ " -P When using -A, check filesystems in parallel\n" \
+ " -R When using -A, skip the root filesystem\n" \
+ " -T Don't show title on startup\n" \
+ " -V Verbose\n" \
+ " -C n Write status information to specified filedescriptor\n" \
+ " -t type List of filesystem types to check"
#define fsck_minix_trivial_usage \
- "[-larvsmf] /dev/name"
+ "[-larvsmf] /dev/name"
#define fsck_minix_full_usage \
- "Performs a consistency check for MINIX filesystems.\n\n" \
- "Options:\n" \
- "\t-l\tLists all filenames\n" \
- "\t-r\tPerform interactive repairs\n" \
- "\t-a\tPerform automatic repairs\n" \
- "\t-v\tverbose\n" \
- "\t-s\tOutputs super-block information\n" \
- "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
- "\t-f\tForce file system check"
+ "Perform a consistency check for MINIX filesystems" \
+ "\n\nOptions:\n" \
+ " -l Lists all filenames\n" \
+ " -r Perform interactive repairs\n" \
+ " -a Perform automatic repairs\n" \
+ " -v Verbose\n" \
+ " -s Outputs super-block information\n" \
+ " -m Activates MINIX-like \"mode not cleared\" warnings\n" \
+ " -f Force file system check"
#define ftpget_trivial_usage \
- "[options] remote-host local-file remote-file"
+ "[options] remote-host local-file remote-file"
#define ftpget_full_usage \
- "Retrieve a remote file via FTP.\n\n" \
- "Options:\n" \
- "\t-c, --continue Continue a previous transfer\n" \
- "\t-v, --verbose Verbose\n" \
- "\t-u, --username Username to be used\n" \
- "\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used"
+ "Retrieve a remote file via FTP" \
+ "\n\nOptions:\n" \
+ " -c, --continue Continue a previous transfer\n" \
+ " -v, --verbose Verbose\n" \
+ " -u, --username Username to be used\n" \
+ " -p, --password Password to be used\n" \
+ " -P, --port Port number to be used"
#define ftpput_trivial_usage \
- "[options] remote-host remote-file local-file"
+ "[options] remote-host remote-file local-file"
#define ftpput_full_usage \
- "Store a local file on a remote machine via FTP.\n\n" \
- "Options:\n" \
- "\t-v, --verbose Verbose\n" \
- "\t-u, --username Username to be used\n" \
- "\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used"
+ "Store a local file on a remote machine via FTP" \
+ "\n\nOptions:\n" \
+ " -v, --verbose Verbose\n" \
+ " -u, --username Username to be used\n" \
+ " -p, --password Password to be used\n" \
+ " -P, --port Port number to be used"
#define fuser_trivial_usage \
- "[options] file OR port/proto"
+ "[options] file OR port/proto"
#define fuser_full_usage \
- "Options:\n" \
- "\t-m Show all processes on the same mounted fs\n" \
- "\t-k Kill all processes that match.\n" \
- "\t-s Don't print or kill anything.\n" \
- "\t-4 When using port/proto only search IPv4 space\n" \
- "\t-6 When using port/proto only search IPv6 space\n" \
- "\t-SIGNAL When used with -k, this signal will be used to kill"
+ "Options:\n" \
+ " -m Show all processes on the same mounted fs\n" \
+ " -k Kill all processes that match\n" \
+ " -s Don't print or kill anything\n" \
+ " -4 When using port/proto only search IPv4 space\n" \
+ " -6 When using port/proto only search IPv6 space\n" \
+ " -SIGNAL When used with -k, this signal will be used to kill"
#define getopt_trivial_usage \
- "[OPTIONS]..."
+ "[OPTIONS]..."
#define getopt_full_usage \
- "Parse command options\n" \
- "\t-a, --alternative Allow long options starting with single -\n" \
- "\t-l, --longoptions=longopts Long options to be recognized\n" \
- "\t-n, --name=progname The name under which errors are reported\n" \
- "\t-o, --options=optstring Short options to be recognized\n" \
- "\t-q, --quiet Disable error reporting by getopt(3)\n" \
- "\t-Q, --quiet-output No normal output\n" \
- "\t-s, --shell=shell Set shell quoting conventions\n" \
- "\t-T, --test Test for getopt(1) version\n" \
- "\t-u, --unquoted Do not quote the output"
+ "Parse command options\n" \
+ " -a, --alternative Allow long options starting with single -\n" \
+ " -l, --longoptions=longopts Long options to be recognized\n" \
+ " -n, --name=progname The name under which errors are reported\n" \
+ " -o, --options=optstring Short options to be recognized\n" \
+ " -q, --quiet Disable error reporting by getopt(3)\n" \
+ " -Q, --quiet-output No normal output\n" \
+ " -s, --shell=shell Set shell quoting conventions\n" \
+ " -T, --test Test for getopt(1) version\n" \
+ " -u, --unquoted Do not quote the output"
#define getopt_example_usage \
- "$ cat getopt.test\n" \
- "#!/bin/sh\n" \
- "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
- " -n 'example.busybox' -- \"$@\"`\n" \
- "if [ $? != 0 ] ; then exit 1 ; fi\n" \
- "eval set -- \"$GETOPT\"\n" \
- "while true ; do\n" \
- " case $1 in\n" \
- " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
- " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
- " -c|--c-long)\n" \
- " case \"$2\" in\n" \
- " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
- " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
- " esac ;;\n" \
- " --) shift ; break ;;\n" \
- " *) echo \"Internal error!\" ; exit 1 ;;\n" \
- " esac\n" \
- "done\n"
+ "$ cat getopt.test\n" \
+ "#!/bin/sh\n" \
+ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
+ " -n 'example.busybox' -- \"$@\"`\n" \
+ "if [ $? != 0 ] ; then exit 1 ; fi\n" \
+ "eval set -- \"$GETOPT\"\n" \
+ "while true ; do\n" \
+ " case $1 in\n" \
+ " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
+ " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \
+ " -c|--c-long)\n" \
+ " case \"$2\" in\n" \
+ " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
+ " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \
+ " esac ;;\n" \
+ " --) shift ; break ;;\n" \
+ " *) echo \"Internal error!\" ; exit 1 ;;\n" \
+ " esac\n" \
+ "done\n"
#define getty_trivial_usage \
- "[OPTIONS]... baud_rate,... line [termtype]"
+ "[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
- "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
- "Options:\n" \
- "\t-h\t\tEnable hardware (RTS/CTS) flow control\n" \
- "\t-i\t\tDo not display /etc/issue before running login\n" \
- "\t-L\t\tLocal line, so do not do carrier detect\n" \
- "\t-m\t\tGet baud rate from modem's CONNECT status message\n" \
- "\t-w\t\tWait for a CR or LF before sending /etc/issue\n" \
- "\t-n\t\tDo not prompt the user for a login name\n" \
- "\t-f issue_file\tDisplay issue_file instead of /etc/issue\n" \
- "\t-l login_app\tInvoke login_app instead of /bin/login\n" \
- "\t-t timeout\tTerminate after timeout if no username is read\n" \
- "\t-I initstring\tSets the init string to send before anything else\n" \
- "\t-H login_host\tLog login_host into the utmp file as the hostname"
+ "Open a tty, prompt for a login name, then invoke /bin/login" \
+ "\n\nOptions:\n" \
+ " -h Enable hardware (RTS/CTS) flow control\n" \
+ " -i Do not display /etc/issue before running login\n" \
+ " -L Local line, so do not do carrier detect\n" \
+ " -m Get baud rate from modem's CONNECT status message\n" \
+ " -w Wait for a CR or LF before sending /etc/issue\n" \
+ " -n Do not prompt the user for a login name\n" \
+ " -f issue_file Display issue_file instead of /etc/issue\n" \
+ " -l login_app Invoke login_app instead of /bin/login\n" \
+ " -t timeout Terminate after timeout if no username is read\n" \
+ " -I initstring Sets the init string to send before anything else\n" \
+ " -H login_host Log login_host into the utmp file as the hostname"
#define grep_trivial_usage \
- "[-rihHnqvso" \
+ "[-rihHnqvso" \
USE_FEATURE_GREP_EGREP_ALIAS("E") \
USE_FEATURE_GREP_CONTEXT("ABC") \
- "] PATTERN [FILEs...]"
+ "] PATTERN [FILEs...]"
#define grep_full_usage \
- "Search for PATTERN in each FILE or standard input.\n\n" \
- "Options:\n" \
- "\t-H\tprefix output lines with filename where match was found\n" \
- "\t-h\tsuppress the prefixing filename on output\n" \
- "\t-r\trecurse subdirectories\n" \
- "\t-i\tignore case distinctions\n" \
- "\t-l\tlist names of files that match\n" \
- "\t-L\tlist names of files that do not match\n" \
- "\t-n\tprint line number with output lines\n" \
- "\t-q\tbe quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
- "\t-v\tselect non-matching lines\n" \
- "\t-s\tsuppress file open/read error messages\n" \
- "\t-c\tonly print count of matching lines\n" \
- "\t-f\tread PATTERN from file\n" \
- "\t-o\tshow only the part of a line that matches PATTERN\n" \
- "\t-e\tPATTERN is a regular expression\n" \
- "\t-F\tPATTERN is a set of newline-separated strings" \
- USE_FEATURE_GREP_EGREP_ALIAS("\n\t-E\tPATTERN is an extended regular expression") \
- USE_FEATURE_GREP_CONTEXT("\n\t-A\tprint NUM lines of trailing context") \
- USE_FEATURE_GREP_CONTEXT("\n\t-B\tprint NUM lines of leading context") \
- USE_FEATURE_GREP_CONTEXT("\n\t-C\tprint NUM lines of output context")
+ "Search for PATTERN in each FILE or standard input" \
+ "\n\nOptions:\n" \
+ " -H Prefix output lines with filename where match was found\n" \
+ " -h Suppress the prefixing filename on output\n" \
+ " -r Recurse subdirectories\n" \
+ " -i Ignore case distinctions\n" \
+ " -l List names of files that match\n" \
+ " -L List names of files that do not match\n" \
+ " -n Print line number with output lines\n" \
+ " -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
+ " -v Select non-matching lines\n" \
+ " -s Suppress file open/read error messages\n" \
+ " -c Only print count of matching lines\n" \
+ " -f Read PATTERN from file\n" \
+ " -o Show only the part of a line that matches PATTERN\n" \
+ " -e PATTERN is a regular expression\n" \
+ " -F PATTERN is a set of newline-separated strings" \
+ USE_FEATURE_GREP_EGREP_ALIAS( \
+ "\n -E PATTERN is an extended regular expression") \
+ USE_FEATURE_GREP_CONTEXT( \
+ "\n -A Print NUM lines of trailing context") \
+ USE_FEATURE_GREP_CONTEXT( \
+ "\n -B Print NUM lines of leading context") \
+ USE_FEATURE_GREP_CONTEXT( \
+ "\n -C Print NUM lines of output context")
#define grep_example_usage \
- "$ grep root /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n" \
- "$ grep ^[rR]oo. /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n"
+ "$ grep root /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n" \
+ "$ grep ^[rR]oo. /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n"
#define gunzip_trivial_usage \
- "[OPTION]... FILE"
+ "[OPTION]... FILE"
#define gunzip_full_usage \
- "Uncompress FILE (or standard input if FILE is '-').\n\n" \
- "Options:\n" \
- "\t-c\tWrite output to standard output\n" \
- "\t-f\tForce read when source is a terminal\n" \
- "\t-t\tTest compressed file integrity"
+ "Uncompress FILE (or standard input if FILE is '-')" \
+ "\n\nOptions:\n" \
+ " -c Write output to standard output\n" \
+ " -f Force read when source is a terminal\n" \
+ " -t Test compressed file integrity"
#define gunzip_example_usage \
- "$ ls -la /tmp/BusyBox*\n" \
- "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
- "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
- "$ ls -la /tmp/BusyBox*\n" \
- "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
+ "$ ls -la /tmp/BusyBox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
+ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
+ "$ ls -la /tmp/BusyBox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
#define gzip_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define gzip_full_usage \
- "Compress FILE(s) with maximum compression.\n" \
- "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
- "Options:\n" \
- "\t-c\tWrite output to standard output instead of FILE.gz\n" \
- "\t-d\tDecompress\n" \
- "\t-f\tForce write when destination is a terminal"
+ "Compress FILE(s) with maximum compression.\n" \
+ "When FILE is '-' or unspecified, reads standard input. Implies -c." \
+ "\n\nOptions:\n" \
+ " -c Write output to standard output instead of FILE.gz\n" \
+ " -d Decompress\n" \
+ " -f Force write when destination is a terminal"
#define gzip_example_usage \
- "$ ls -la /tmp/busybox*\n" \
- "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
- "$ gzip /tmp/busybox.tar\n" \
- "$ ls -la /tmp/busybox*\n" \
- "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
+ "$ ls -la /tmp/busybox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
+ "$ gzip /tmp/busybox.tar\n" \
+ "$ ls -la /tmp/busybox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d<delay>] [-n<nosync>] [-f<force>]"
#define halt_full_usage \
- "Halt the system.\n" \
- "Options:\n" \
- "\t-d\t\tdelay interval for halting\n" \
- "\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce halt (don't go through init)"
+ "Halt the system" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force halt (don't go through init)"
#define hdparm_trivial_usage \
- "[options] [device] .."
+ "[options] [device] .."
#define hdparm_full_usage \
- USE_FEATURE_HDPARM_GET_IDENTITY("\tIf no device name is specified try to read from stdin.\n") \
- "\nOptions:\n" \
- "\t-a get/set fs readahead\n" \
- "\t-A set drive read-lookahead flag (0/1)\n" \
- "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- "\t-B set Advanced Power Management setting (1-255)\n" \
- "\t-c get/set IDE 32-bit IO setting\n" \
- "\t-C check IDE power mode status\n" \
- USE_FEATURE_HDPARM_HDIO_GETSET_DMA("\t-d get/set using_dma flag\n") \
- "\t-D enable/disable drive defect-mgmt\n" \
- "\t-f flush buffer cache for device on exit\n" \
- "\t-g display drive geometry\n" \
- "\t-h display terse usage information\n" \
- USE_FEATURE_HDPARM_GET_IDENTITY("\t-i display drive identification\n") \
- USE_FEATURE_HDPARM_GET_IDENTITY("\t-I detailed/current information directly from drive\n") \
- "\t-k get/set keep_settings_over_reset flag (0/1)\n" \
- "\t-K set drive keep_features_over_reset flag (0/1)\n" \
- "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
- "\t-m get/set multiple sector count\n" \
- "\t-n get/set ignore-write-errors flag (0/1)\n" \
- "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- "\t-P set drive prefetch count\n" \
- "\t-q change next setting quietly\n" \
- "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
- "\t-r get/set readonly flag (DANGEROUS to set)\n" \
- USE_FEATURE_HDPARM_HDIO_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
- "\t-S set standby (spindown) timeout\n" \
- "\t-t perform device read timings\n" \
- "\t-T perform cache read timings\n" \
- "\t-u get/set unmaskirq flag (0/1)\n" \
- USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
- "\t-v defaults; same as -mcudkrag for IDE drives\n" \
- "\t-V display program version and exit immediately\n" \
- USE_FEATURE_HDPARM_HDIO_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
- "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
- USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
- "\t-X set IDE xfer mode (DANGEROUS)\n" \
- "\t-y put IDE drive in standby mode\n" \
- "\t-Y put IDE drive to sleep\n" \
- "\t-Z disable Seagate auto-powersaving mode\n" \
- "\t-z re-read partition table"
+ USE_FEATURE_HDPARM_GET_IDENTITY( \
+ "If no device name is specified try to read from stdin.\n\n") \
+ "Options:\n" \
+ " -a Get/set fs readahead\n" \
+ " -A Set drive read-lookahead flag (0/1)\n" \
+ " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ " -B Set Advanced Power Management setting (1-255)\n" \
+ " -c Get/set IDE 32-bit IO setting\n" \
+ " -C Check IDE power mode status\n" \
+ USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
+ " -d Get/set using_dma flag\n") \
+ " -D Enable/disable drive defect-mgmt\n" \
+ " -f Flush buffer cache for device on exit\n" \
+ " -g Display drive geometry\n" \
+ " -h Display terse usage information\n" \
+ USE_FEATURE_HDPARM_GET_IDENTITY( \
+ " -i Display drive identification\n") \
+ USE_FEATURE_HDPARM_GET_IDENTITY( \
+ " -I Detailed/current information directly from drive\n") \
+ " -k Get/set keep_settings_over_reset flag (0/1)\n" \
+ " -K Set drive keep_features_over_reset flag (0/1)\n" \
+ " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
+ " -m Get/set multiple sector count\n" \
+ " -n Get/set ignore-write-errors flag (0/1)\n" \
+ " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ " -P Set drive prefetch count\n" \
+ " -q Change next setting quietly\n" \
+ " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
+ " -r Get/set readonly flag (DANGEROUS to set)\n" \
+ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
+ " -R Register an IDE interface (DANGEROUS)\n") \
+ " -S Set standby (spindown) timeout\n" \
+ " -t Perform device read timings\n" \
+ " -T Perform cache read timings\n" \
+ " -u Get/set unmaskirq flag (0/1)\n" \
+ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
+ " -U Un-register an IDE interface (DANGEROUS)\n") \
+ " -v Defaults; same as -mcudkrag for IDE drives\n" \
+ " -V Display program version and exit immediately\n" \
+ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
+ " -w Perform device reset (DANGEROUS)\n") \
+ " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
+ " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ " -X Set IDE xfer mode (DANGEROUS)\n" \
+ " -y Put IDE drive in standby mode\n" \
+ " -Y Put IDE drive to sleep\n" \
+ " -Z Disable Seagate auto-powersaving mode\n" \
+ " -z Re-read partition table"
#define head_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define head_full_usage \
- "Print first 10 lines of each FILE to standard output.\n" \
- "With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
- "Options:\n" \
- "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
+ "Print first 10 lines of each FILE to standard output.\n" \
+ "With more than one FILE, precede each with a header giving the\n" \
+ "file name. With no FILE, or when FILE is -, read standard input." \
+ "\n\nOptions:" \
+ "\n -n NUM Print first NUM lines instead of first 10" \
USE_FEATURE_FANCY_HEAD( \
- "\n\t-c NUM\t\toutput the first NUM bytes\n" \
- "\t-q\t\tnever output headers giving file names\n" \
- "\t-v\t\talways output headers giving file names" )
+ "\n -c NUM Output the first NUM bytes" \
+ "\n -q Never output headers giving file names" \
+ "\n -v Always output headers giving file names")
#define head_example_usage \
- "$ head -n 2 /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n" \
- "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
+ "$ head -n 2 /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n" \
+ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define hexdump_trivial_usage \
- "[-[bcCdefnosvx]] [OPTION] FILE"
+ "[-[bcCdefnosvx]] [OPTION] FILE"
#define hexdump_full_usage \
- "The hexdump utility is a filter which displays the specified files,\n" \
- "or the standard input, if no files are specified, in a user specified\n" \
- "format\n" \
- "\t-b\t\tOne-byte octal display\n" \
- "\t-c\t\tOne-byte character display\n" \
- "\t-C\t\tCanonical hex+ASCII, 16 bytes per line\n" \
- "\t-d\t\tTwo-byte decimal display\n" \
- "\t-e FORMAT STRING\n" \
- "\t-f FORMAT FILE\n" \
- "\t-n LENGTH\tInterpret only length bytes of input\n" \
- "\t-o\t\tTwo-byte octal display\n" \
- "\t-s OFFSET\tSkip offset byte\n" \
- "\t-v\t\tdisplay all input data\n" \
- "\t-x\t\tTwo-byte hexadecimal display"
+ "Display file(s) or standard input in a user specified format" \
+ "\n\nOptions:\n" \
+ " -b One-byte octal display\n" \
+ " -c One-byte character display\n" \
+ " -C Canonical hex+ASCII, 16 bytes per line\n" \
+ " -d Two-byte decimal display\n" \
+ " -e FORMAT STRING\n" \
+ " -f FORMAT FILE\n" \
+ " -n LENGTH Interpret only length bytes of input\n" \
+ " -o Two-byte octal display\n" \
+ " -s OFFSET Skip offset bytes\n" \
+ " -v Display all input data\n" \
+ " -x Two-byte hexadecimal display"
#define hostid_trivial_usage \
- ""
+ ""
#define hostid_full_usage \
- "Print out a unique 32-bit identifier for the machine."
+ "Print out a unique 32-bit identifier for the machine"
#define hostname_trivial_usage \
- "[OPTION] {hostname | -F FILE}"
+ "[OPTION] {hostname | -F FILE}"
#define hostname_full_usage \
- "Get or set the hostname or DNS domain name. If a hostname is given\n" \
- "(or FILE with the -F parameter), the host name will be set.\n\n" \
- "Options:\n" \
- "\t-s\tShort\n" \
- "\t-i\tAddresses for the hostname\n" \
- "\t-d\tDNS domain name\n" \
- "\t-f\tFully qualified domain name\n" \
- "\t-F FILE\tUse the contents of FILE to specify the hostname"
+ "Get or set the hostname or DNS domain name. If a hostname is given\n" \
+ "(or FILE with the -F parameter), the host name will be set." \
+ "\n\nOptions:\n" \
+ " -s Short\n" \
+ " -i Addresses for the hostname\n" \
+ " -d DNS domain name\n" \
+ " -f Fully qualified domain name\n" \
+ " -F FILE Use the contents of FILE to specify the hostname"
#define hostname_example_usage \
- "$ hostname\n" \
- "sage\n"
+ "$ hostname\n" \
+ "sage\n"
#define httpd_trivial_usage \
- "[-c <conf file>]" \
- USE_FEATURE_HTTPD_WITHOUT_INETD(" [-p <port>]") \
+ "[-c <conf file>]" \
+ " [-p <port>]" \
+ " [-i] [-f]" \
USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
- " [-h home]" \
- " [-d/-e <string>]"
+ " [-h home]" \
+ " [-d/-e <string>]"
#define httpd_full_usage \
- "Listens for incoming http server requests.\n\n" \
- "Options:\n" \
- "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
- USE_FEATURE_HTTPD_WITHOUT_INETD("\t-p PORT\t\tServer port (default 80)\n") \
- USE_FEATURE_HTTPD_SETUID("\t-u USER[:GRP]\tSet uid/gid after binding to port\n") \
- USE_FEATURE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
- USE_FEATURE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
- "\t-h HOME\t\tSpecifies http HOME directory (default ./)\n" \
- "\t-e STRING\tHTML encode STRING\n" \
- "\t-d STRING\tURL decode STRING"
+ "Listen for incoming http server requests" \
+ "\n\nOptions:\n" \
+ " -c FILE Specifies configuration file. (default httpd.conf)\n" \
+ " -p PORT Server port (default 80)\n" \
+ " -i Assume that we are started from inetd\n" \
+ " -f Do not daemonize\n" \
+ USE_FEATURE_HTTPD_SETUID( \
+ " -u USER[:GRP] Set uid/gid after binding to port\n") \
+ USE_FEATURE_HTTPD_BASIC_AUTH( \
+ " -r REALM Authentication Realm for Basic Authentication\n") \
+ USE_FEATURE_HTTPD_AUTH_MD5( \
+ " -m PASS Crypt PASS with md5 algorithm\n") \
+ " -h HOME Specifies http HOME directory (default ./)\n" \
+ " -e STRING HTML encode STRING\n" \
+ " -d STRING URL decode STRING"
#define hwclock_trivial_usage \
- "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
+ "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
#define hwclock_full_usage \
- "Query and set the hardware clock (RTC)\n\n" \
- "Options:\n" \
- "\t-r\tread hardware clock and print result\n" \
- "\t-s\tset the system time from the hardware clock\n" \
- "\t-w\tset the hardware clock to the current system time\n" \
- "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
- "\t-l\tthe hardware clock is kept in local time"
+ "Query and set the hardware clock (RTC)" \
+ "\n\nOptions:\n" \
+ " -r Read hardware clock and print result\n" \
+ " -s Set the system time from the hardware clock\n" \
+ " -w Set the hardware clock to the current system time\n" \
+ " -u The hardware clock is kept in coordinated universal time\n" \
+ " -l The hardware clock is kept in local time"
#define id_trivial_usage \
- "[OPTIONS]... [USERNAME]"
+ "[OPTIONS]... [USERNAME]"
#define id_full_usage \
- "Print information for USERNAME or the current user\n\n" \
- "Options:\n" \
- USE_SELINUX("\t-c\tprints only the security context\n") \
- "\t-g\tprints only the group ID\n" \
- "\t-u\tprints only the user ID\n" \
- "\t-n\tprint a name instead of a number\n" \
- "\t-r\tprints the real user ID instead of the effective ID"
+ "Print information for USERNAME or the current user" \
+ "\n\nOptions:\n" \
+ USE_SELINUX( \
+ " -c Prints only the security context\n") \
+ " -g Prints only the group ID\n" \
+ " -u Prints only the user ID\n" \
+ " -n Print a name instead of a number\n" \
+ " -r Prints the real user ID instead of the effective ID"
#define id_example_usage \
- "$ id\n" \
- "uid=1000(andersen) gid=1000(andersen)\n"
+ "$ id\n" \
+ "uid=1000(andersen) gid=1000(andersen)\n"
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
- "configure a network interface\n\n" \
- "Options:\n" \
- USE_FEATURE_IPV6("\t[add <address>[/<prefixlen>]]\n") \
- USE_FEATURE_IPV6("\t[del <address>[/<prefixlen>]]\n") \
- "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
- "\t[netmask <address>] [dstaddr <address>]\n" \
- USE_FEATURE_IFCONFIG_SLIP("\t[outfill <NN>] [keepalive <NN>]\n") \
- "\t" USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") \
- "[metric <NN>] [mtu <NN>]\n" \
- "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
- "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
- USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
- "\t[up|down] ..."
+ "Configure a network interface" \
+ "\n\nOptions:\n" \
+ USE_FEATURE_IPV6( \
+ " [add <address>[/<prefixlen>]]\n") \
+ USE_FEATURE_IPV6( \
+ " [del <address>[/<prefixlen>]]\n") \
+ " [[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
+ " [netmask <address>] [dstaddr <address>]\n" \
+ USE_FEATURE_IFCONFIG_SLIP( \
+ " [outfill <NN>] [keepalive <NN>]\n") \
+ " " USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") "[metric <NN>] [mtu <NN>]\n" \
+ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
+ " [multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
+ USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
+ " [mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
+ " [up|down] ..."
#define ifup_trivial_usage \
- "<-ahinv> <ifaces...>"
+ "<-ahinv> <ifaces...>"
#define ifup_full_usage \
- "ifup <options> <ifaces...>\n\n" \
- "Options:\n" \
- "\t-h\tthis help\n" \
- "\t-a\tde/configure all interfaces automatically\n" \
- "\t-i FILE\tuse FILE for interface definitions\n" \
- "\t-n\tprint out what would happen, but don't do it\n" \
- "\t\t\t(note that this option doesn't disable mappings)\n" \
- "\t-v\tprint out what would happen before doing it\n" \
- "\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration"
+ "Options:\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
+ " (note that this option doesn't disable mappings)\n" \
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
#define ifdown_trivial_usage \
- "<-ahinv> <ifaces...>"
+ "<-ahinv> <ifaces...>"
#define ifdown_full_usage \
- "ifdown <options> <ifaces...>\n\n" \
- "Options:\n" \
- "\t-h\tthis help\n" \
- "\t-a\tde/configure all interfaces automatically\n" \
- "\t-i FILE\tuse FILE for interface definitions\n" \
- "\t-n\tprint out what would happen, but don't do it\n" \
- "\t\t(note that this option doesn't disable mappings)\n" \
- "\t-v\tprint out what would happen before doing it\n" \
- "\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration"
+ "Options:\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
+ " (note that this option doesn't disable mappings)\n" \
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
#define inetd_trivial_usage \
- "[-f] [-q len] [conf]"
+ "[-f] [-q len] [conf]"
#define inetd_full_usage \
- "Listens for network connections and launches programs\n\n" \
- "Option:\n" \
- "\t-f\tRun as a foreground progress\n" \
- "\t-q\tSets the size of the socket listen queue to\n" \
- "\t\tthe specified value. Default is 128"
+ "Listen for network connections and launch programs" \
+ "\n\nOptions:\n" \
+ " -f Run in foreground\n" \
+ " -q N Set the size of the socket listen queue to N\n" \
+ " (default: 128)"
#define init_trivial_usage \
- ""
+ ""
#define init_full_usage \
- "Init is the parent of all processes."
+ "Init is the parent of all processes"
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
-" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
+" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
-" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
-" wants to run 'reboot' at this point to cause the system to reboot.\n" \
+" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
+" wants to run 'reboot' at this point to cause the system to reboot.\n" \
" Finally the 'shutdown' action specifies the actions to taken when\n" \
-" init is told to reboot. Unmounting filesystems and disabling swap\n" \
-" is a very good here\n" \
+" init is told to reboot. Unmounting filesystems and disabling swap\n" \
+" is a very good here.\n" \
"\n" \
" Run repeatedly actions:\n" \
"\n" \
"\n" \
"Example /etc/inittab file:\n" \
"\n" \
-" # This is run first except when booting in single-user mode.\n" \
+" # This is run first except when booting in single-user mode\n" \
" #\n" \
" ::sysinit:/etc/init.d/rcS\n" \
" \n" \
" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
" #\n" \
-" # Example how to put a getty on a modem line.\n" \
+" # Example how to put a getty on a modem line\n" \
" #::respawn:/sbin/getty 57600 ttyS2\n" \
" \n" \
" # Stuff to do when restarting the init process\n" \
" ::shutdown:/sbin/swapoff -a\n"
#define insmod_trivial_usage \
- "[OPTION]... MODULE [symbol=value]..."
+ "[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
- "Loads the specified kernel modules into the kernel.\n\n" \
- "Options:\n" \
- "\t-f\tForce module to load into the wrong kernel version\n" \
- "\t-k\tMake module autoclean-able\n" \
- "\t-v\tverbose output\n" \
- "\t-q\tquiet output\n" \
- "\t-L\tLock to prevent simultaneous loads of a module\n" \
- USE_FEATURE_INSMOD_LOAD_MAP("\t-m\tOutput load map to stdout\n") \
- "\t-o NAME\tSet internal module name to NAME\n" \
- "\t-x\tdo not export externs"
+ "Load the specified kernel modules into the kernel" \
+ "\n\nOptions:\n" \
+ " -f Force module to load into the wrong kernel version\n" \
+ " -k Make module autoclean-able\n" \
+ " -v Verbose output\n" \
+ " -q Quiet output\n" \
+ " -L Lock to prevent simultaneous loads of a module\n" \
+ USE_FEATURE_INSMOD_LOAD_MAP( \
+ " -m Output load map to stdout\n") \
+ " -o NAME Set internal module name to NAME\n" \
+ " -x Do not export externs"
#define install_trivial_usage \
- "[-cgmops] [sources] <dest|directory>"
+ "[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
- "Copies files and set attributes\n\n" \
- "Options:\n" \
- "\t-c\tcopy the file, default\n" \
- "\t-d\tcreate directories\n" \
- "\t-g\tset group ownership\n" \
- "\t-m\tset permission modes\n" \
- "\t-o\tset ownership\n" \
- "\t-p\tpreserve date\n" \
- "\t-s\tstrip symbol tables"
+ "Copy files and set attributes" \
+ "\n\nOptions:\n" \
+ " -c Copy the file, default\n" \
+ " -d Create directories\n" \
+ " -g Set group ownership\n" \
+ " -m Set permission modes\n" \
+ " -o Set ownership\n" \
+ " -p Preserve date\n" \
+ " -s Strip symbol tables"
#define ip_trivial_usage \
- "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
+ "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}"
#define ip_full_usage \
- "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
- "where OBJECT := { link | addr | route | tunnel }\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
+ "ip [OPTIONS] OBJECT {COMMAND}\n" \
+ "where OBJECT := {link | addr | route | tunnel |rule}\n" \
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
- "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
- "\t\t[ dev STRING ] [ to PREFIX ] }"
+ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
+ " [ dev STRING ] [ to PREFIX ] }"
#define ipaddr_full_usage \
- "ipaddr {add|delete} IFADDR dev STRING\n" \
- "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
- "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
- "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
- "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
- "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
- "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
+ "ipaddr {add|delete} IFADDR dev STRING\n" \
+ "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
+ " [ to PREFIX ] [ label PATTERN ]\n" \
+ " IFADDR := PREFIX | ADDR peer PREFIX\n" \
+ " [ broadcast ADDR ] [ anycast ADDR ]\n" \
+ " [ label STRING ] [ scope SCOPE-ID ]\n" \
+ " SCOPE-ID := [ host | link | global | NUMBER ]"
#define ipcalc_trivial_usage \
- "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
+ "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
- "Calculate IP network settings from a IP address\n\n" \
- "Options:\n" \
- "\t-b\t--broadcast\tDisplay calculated broadcast address\n" \
- "\t-n\t--network\tDisplay calculated network address\n" \
- "\t-m\t--netmask\tDisplay default netmask for IP" \
+ "Calculate IP network settings from a IP address" \
+ "\n\nOptions:" \
+ "\n -b --broadcast Display calculated broadcast address" \
+ "\n -n --network Display calculated network address" \
+ "\n -m --netmask Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
- "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK\n" \
- "\t-h\t--hostname\tDisplay first resolved host name\n" \
- "\t-s\t--silent\tDon't ever display error messages")
+ "\n -p --prefix Display the prefix for IP/NETMASK" \
+ "\n -h --hostname Display first resolved host name" \
+ "\n -s --silent Don't ever display error messages")
#define ipcrm_trivial_usage \
- "[-[MQS] key] [-[mqs] id]"
+ "[-[MQS] key] [-[mqs] id]"
#define ipcrm_full_usage \
- "The upper-case options MQS are used to remove a shared memory segment by a\n" \
- "segment by a shmkey value. The lower-case options mqs are used\n" \
- "to remove a segment by shmid value.\n" \
- "\t-[mM]\tRemove the memory segment after the last detach\n" \
- "\t-[qQ]\tRemove the message queue\n" \
- "\t-[sS]\tRemove the semaphore"
+ "The upper-case options MQS are used to remove a shared memory segment by a\n" \
+ "segment by a shmkey value. The lower-case options mqs are used\n" \
+ "to remove a segment by shmid value.\n" \
+ "\n\nOptions:\n" \
+ " -[mM] Remove the memory segment after the last detach\n" \
+ " -[qQ] Remove the message queue\n" \
+ " -[sS] Remove the semaphore"
#define ipcs_trivial_usage \
- "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
+ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage \
- "\t-i\tspecify a specific resource id\n" \
- "Resource specification:\n" \
- "\t-m\tshared memory segments\n" \
- "\t-q\tmessage queues\n" \
- "\t-s\tsemaphore arrays\n" \
- "\t-a\tall (default)\n" \
- "Output format:\n" \
- "\t-t\ttime\n" \
- "\t-c\tcreator\n" \
- "\t-p\tpid\n" \
- "\t-l\tlimits\n" \
- "\t-u\tsummary"
+ " -i Specify a specific resource id\n" \
+ "Resource specification:\n" \
+ " -m Shared memory segments\n" \
+ " -q Message queues\n" \
+ " -s Semaphore arrays\n" \
+ " -a All (default)\n" \
+ "Output format:\n" \
+ " -t Time\n" \
+ " -c Creator\n" \
+ " -p Pid\n" \
+ " -l Limits\n" \
+ " -u Summary"
#define iplink_trivial_usage \
- "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
+ "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
- "iplink set DEVICE { up | down | arp { on | off } |\n" \
- "\t\t\tdynamic { on | off } |\n" \
- "\t\t\tmtu MTU }\n" \
- "\tiplink show [ DEVICE ]"
+ "iplink set DEVICE { up | down | arp { on | off } |\n" \
+ " dynamic { on | off } |\n" \
+ " mtu MTU }\n" \
+ "iplink show [ DEVICE ]"
#define iproute_trivial_usage \
- "{ list | flush | { add | del | change | append |\n" \
- "\t\treplace | monitor } ROUTE }"
+ "{ list | flush | { add | del | change | append |\n" \
+ " replace | monitor } ROUTE }"
#define iproute_full_usage \
- "iproute { list | flush } SELECTOR\n" \
- "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
- "\t\t\t[ oif STRING ] [ tos TOS ]\n" \
- "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
- "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
- "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
+ "iproute { list | flush } SELECTOR\n" \
+ "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
+ " [ oif STRING ] [ tos TOS ]\n" \
+ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
+ " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
+ " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
+
+#define iprule_trivial_usage \
+ "{[ list | add | del ] RULE}"
+#define iprule_full_usage \
+ "iprule [ list | add | del ] SELECTOR ACTION\n" \
+ " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \
+ " [ dev STRING ] [ pref NUMBER ]\n" \
+ " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \
+ " [ prohibit | reject | unreachable ]\n" \
+ " [ realms [SRCREALM/]DSTREALM ]\n" \
+ " TABLE_ID := [ local | main | default | NUMBER ]"
#define iptunnel_trivial_usage \
- "{ add | change | del | show } [ NAME ]\n" \
- "\t\t[ mode { ipip | gre | sit } ]\n" \
- "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+ "{ add | change | del | show } [ NAME ]\n" \
+ " [ mode { ipip | gre | sit } ]\n" \
+ " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
#define iptunnel_full_usage \
- "iptunnel { add | change | del | show } [ NAME ]\n" \
- "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
- "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
- "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
+ "iptunnel { add | change | del | show } [ NAME ]\n" \
+ " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
+ " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
+ " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
#define kill_trivial_usage \
- "[-l] [-signal] process-id [process-id ...]"
+ "[-l] [-signal] process-id [process-id ...]"
#define kill_full_usage \
- "Send a signal (default is TERM) to the specified process(es).\n\n" \
- "Options:\n" \
- "\t-l\tList all signal names and numbers"
+ "Send a signal (default is TERM) to the specified process(es)" \
+ "\n\nOptions:\n" \
+ " -l List all signal names and numbers"
#define kill_example_usage \
- "$ ps | grep apache\n" \
- "252 root root S [apache]\n" \
- "263 www-data www-data S [apache]\n" \
- "264 www-data www-data S [apache]\n" \
- "265 www-data www-data S [apache]\n" \
- "266 www-data www-data S [apache]\n" \
- "267 www-data www-data S [apache]\n" \
- "$ kill 252\n"
+ "$ ps | grep apache\n" \
+ "252 root root S [apache]\n" \
+ "263 www-data www-data S [apache]\n" \
+ "264 www-data www-data S [apache]\n" \
+ "265 www-data www-data S [apache]\n" \
+ "266 www-data www-data S [apache]\n" \
+ "267 www-data www-data S [apache]\n" \
+ "$ kill 252\n"
#define killall_trivial_usage \
- "[-l] [-q] [-signal] process-name [process-name ...]"
+ "[-l] [-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
- "Send a signal (default is TERM) to the specified process(es).\n\n" \
- "Options:\n" \
- "\t-l\tList all signal names and numbers\n" \
- "\t-q\tDo not complain if no processes were killed"
+ "Send a signal (default is TERM) to the specified process(es)" \
+ "\n\nOptions:\n" \
+ " -l List all signal names and numbers\n" \
+ " -q Do not complain if no processes were killed"
#define killall_example_usage \
- "$ killall apache\n"
+ "$ killall apache\n"
#define killall5_trivial_usage \
- "[-l] [-signal]"
+ "[-l] [-signal]"
#define killall5_full_usage \
- "Send a signal (default is TERM) to all processes outside current session.\n\n" \
- "Options:\n" \
- "\t-l\tList all signal names and numbers\n" \
+ "Send a signal (default is TERM) to all processes outside current session" \
+ "\n\nOptions:\n" \
+ " -l List all signal names and numbers\n" \
#define klogd_trivial_usage \
- "[-c n] [-n]"
+ "[-c n] [-n]"
#define klogd_full_usage \
- "Kernel logger.\n" \
- "Options:\n" \
- "\t-c n\tSets the default log level of console messages to n\n" \
- "\t-n\tRun as a foreground process"
+ "Kernel logger" \
+ "\n\nOptions:\n" \
+ " -c n Sets the default log level of console messages to n\n" \
+ " -n Run as foreground process"
#define length_trivial_usage \
- "STRING"
+ "STRING"
#define length_full_usage \
- "Prints out the length of the specified STRING."
+ "Print out the length of the specified STRING"
#define length_example_usage \
- "$ length Hello\n" \
- "5\n"
+ "$ length Hello\n" \
+ "5\n"
#define less_trivial_usage \
- "[-EMNmh~?] FILE1 FILE2..."
+ "[-EMNmh~?] FILE1 FILE2..."
#define less_full_usage \
- "View a file or list of files. The position within files can be\n" \
- "changed, and files can be manipulated in various ways with the\n" \
- "following options:\n\n" \
- "\t-E\tQuit once the end of a file is reached\n" \
- "\t-M\tDisplay a status line containing the current line numbers\n" \
- "\t\tand the percentage through the file\n" \
- "\t-N\tPrefix line numbers to each line\n" \
- "\t-m\tDisplay a status line containing the percentage through the\n" \
- "\t\tfile\n" \
- "\t-~\tSuppress ~s displayed when input past the end of the file is\n" \
- "\t\treached.\n" \
- "\t-h, -?\tDisplay this help message"
+ "View a file or list of files. The position within files can be\n" \
+ "changed, and files can be manipulated in various ways." \
+ "\n\nOptions:\n" \
+ " -E Quit once the end of a file is reached\n" \
+ " -M Display a status line containing the current line numbers\n" \
+ " and the percentage through the file\n" \
+ " -N Prefix line numbers to each line\n" \
+ " -m Display a status line containing the percentage through the\n" \
+ " file\n" \
+ " -~ Suppress ~s displayed when input past the end of the file is\n" \
+ " reached"
#define setarch_trivial_usage \
- "<personality> <program> [args ...]"
+ "<personality> <program> [args ...]"
#define setarch_full_usage \
- "Personality may be:\n" \
- "\tlinux32\tSet 32bit uname emulation\n" \
- "\tlinux64\tSet 64bit uname emulation"
+ "Personality may be:\n" \
+ " linux32 Set 32bit uname emulation\n" \
+ " linux64 Set 64bit uname emulation"
#define ln_trivial_usage \
- "[OPTION] TARGET... LINK_NAME|DIRECTORY"
+ "[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage \
- "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \
- "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
- "\t-s\tmake symbolic links instead of hard links\n" \
- "\t-f\tremove existing destination files\n" \
- "\t-n\tno dereference symlinks - treat like normal file\n" \
- "\t-b\tmake a backup of the target (if exists) before link operation\n" \
- "\t-S suffix\tuse suffix instead of ~ when making backup files"
+ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
+ "You may use '--' to indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
+ " -s Make symbolic links instead of hard links\n" \
+ " -f Remove existing destination files\n" \
+ " -n No dereference symlinks - treat like normal file\n" \
+ " -b Make a backup of the target (if exists) before link operation\n" \
+ " -S suf Use suffix instead of ~ when making backup files"
#define ln_example_usage \
- "$ ln -s BusyBox /tmp/ls\n" \
- "$ ls -l /tmp/ls\n" \
- "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
+ "$ ln -s BusyBox /tmp/ls\n" \
+ "$ ls -l /tmp/ls\n" \
+ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
#define loadfont_trivial_usage \
- "< font"
+ "< font"
#define loadfont_full_usage \
- "Loads a console font from standard input."
+ "Load a console font from standard input"
#define loadfont_example_usage \
- "$ loadfont < /etc/i18n/fontname\n"
+ "$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
- "< keymap"
+ "< keymap"
#define loadkmap_full_usage \
- "Loads a binary keyboard translation table from standard input."
+ "Load a binary keyboard translation table from standard input"
#define loadkmap_example_usage \
- "$ loadkmap < /etc/i18n/lang-keymap\n"
+ "$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
- "[OPTION]... [MESSAGE]"
+ "[OPTION]... [MESSAGE]"
#define logger_full_usage \
- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
- "Options:\n" \
- "\t-s\tLog to stderr as well as the system log\n" \
- "\t-t TAG\tLog using the specified tag (defaults to user name)\n" \
- "\t-p PRIORITY\tEnter the message with the specified priority\n" \
- "\t\tThis may be numerical or a ``facility.level'' pair"
+ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
+ "\n\nOptions:\n" \
+ " -s Log to stderr as well as the system log\n" \
+ " -t TAG Log using the specified tag (defaults to user name)\n" \
+ " -p PRIO Enter the message with the specified priority.\n" \
+ " This may be numerical or a 'facility.level' pair."
#define logger_example_usage \
- "$ logger \"hello\"\n"
+ "$ logger \"hello\"\n"
#define login_trivial_usage \
- "[OPTION]... [username] [ENV=VAR ...]"
+ "[OPTION]... [username] [ENV=VAR ...]"
#define login_full_usage \
- "Begin a new session on the system\n\n" \
- "Options:\n" \
- "\t-f\tDo not authenticate (user already authenticated)\n" \
- "\t-h\tName of the remote host for this login\n" \
- "\t-p\tPreserve environment"
+ "Begin a new session on the system" \
+ "\n\nOptions:\n" \
+ " -f Do not authenticate (user already authenticated)\n" \
+ " -h Name of the remote host for this login\n" \
+ " -p Preserve environment"
#define logname_trivial_usage \
- ""
+ ""
#define logname_full_usage \
- "Print the name of the current user."
+ "Print the name of the current user"
#define logname_example_usage \
- "$ logname\n" \
- "root\n"
+ "$ logname\n" \
+ "root\n"
#define logread_trivial_usage \
- "[OPTION]..."
+ "[OPTION]..."
#define logread_full_usage \
- "Shows the messages from syslogd (using circular buffer).\n\n" \
- "Options:\n" \
- "\t-f\t\toutput data as the log grows"
+ "Show the messages from syslogd (using circular buffer)" \
+ "\n\nOptions:\n" \
+ " -f Output data as the log grows"
#define losetup_trivial_usage \
- "[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
+ "[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define losetup_full_usage \
- "(Dis)associate LOOPDEVICE with FILE, or display current associations.\n\n" \
- "Options:\n" \
- "\t-d\t\tDisassociate LOOPDEVICE\n" \
- "\t-o OFFSET\tStart OFFSET bytes into FILE"
+ "(Dis)associate LOOPDEVICE with FILE, or display current associations" \
+ "\n\nOptions:\n" \
+ " -d Disassociate LOOPDEVICE\n" \
+ " -o OFFSET Start OFFSET bytes into FILE"
#define losetup_notes_usage \
- "No arguments will display all current associations.\n" \
- "One argument (losetup /dev/loop1) will display the current association\n" \
- "(if any), or disassociate it (with -d). The display shows the offset\n" \
- "and filename of the file the loop device is currently bound to.\n\n" \
- "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
- "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
+ "No arguments will display all current associations.\n" \
+ "One argument (losetup /dev/loop1) will display the current association\n" \
+ "(if any), or disassociate it (with -d). The display shows the offset\n" \
+ "and filename of the file the loop device is currently bound to.\n\n" \
+ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
+ "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
#define ls_trivial_usage \
- "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
+ "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
USE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
- "List directory contents\n\n" \
- "Options:\n" \
- "\t-1\tlist files in a single column\n" \
- "\t-A\tdo not list implied . and ..\n" \
- "\t-a\tdo not hide entries starting with .\n" \
- "\t-C\tlist entries by columns\n" \
- USE_FEATURE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
- USE_FEATURE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \
- "\t-d\tlist directory entries instead of contents\n" \
- USE_FEATURE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
- USE_FEATURE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
- "\t-i\tlist the i-node for each file\n" \
- "\t-l\tuse a long listing format\n" \
- "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
- USE_FEATURE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
- USE_FEATURE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
- USE_FEATURE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
- USE_FEATURE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
- USE_FEATURE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
- "\t-s\tlist the size of each file, in blocks\n" \
- USE_FEATURE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
- USE_FEATURE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
- USE_FEATURE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
- USE_FEATURE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
- USE_FEATURE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
- "\t-x\tlist entries by lines instead of by columns\n" \
- USE_FEATURE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
+ "List directory contents" \
+ "\n\nOptions:" \
+ "\n -1 List files in a single column" \
+ "\n -A Do not list implied . and .." \
+ "\n -a Do not hide entries starting with ." \
+ "\n -C List entries by columns" \
+ USE_FEATURE_LS_TIMESTAMPS( \
+ "\n -c With -l: show ctime") \
+ USE_FEATURE_LS_COLOR( \
+ "\n --color[={always,never,auto}] Control coloring") \
+ "\n -d List directory entries instead of contents" \
+ USE_FEATURE_LS_TIMESTAMPS( \
+ "\n -e List both full date and full time") \
+ USE_FEATURE_LS_FILETYPES( \
+ "\n -F Append indicator (one of */=@|) to entries") \
+ "\n -i List the i-node for each file" \
+ "\n -l Use a long listing format" \
+ "\n -n List numeric UIDs and GIDs instead of names" \
+ USE_FEATURE_LS_FILETYPES( \
+ "\n -p Append indicator (one of /=@|) to entries") \
+ USE_FEATURE_LS_FOLLOWLINKS( \
+ "\n -L List entries pointed to by symbolic links") \
+ USE_FEATURE_LS_RECURSIVE( \
+ "\n -R List subdirectories recursively") \
+ USE_FEATURE_LS_SORTFILES( \
+ "\n -r Sort the listing in reverse order") \
+ USE_FEATURE_LS_SORTFILES( \
+ "\n -S Sort the listing by file size") \
+ "\n -s List the size of each file, in blocks" \
+ USE_FEATURE_AUTOWIDTH( \
+ "\n -T NUM Assume Tabstop every NUM columns") \
+ USE_FEATURE_LS_TIMESTAMPS( \
+ "\n -t With -l: show modification time") \
+ USE_FEATURE_LS_TIMESTAMPS( \
+ "\n -u With -l: show access time") \
+ USE_FEATURE_LS_SORTFILES( \
+ "\n -v Sort the listing by version") \
+ USE_FEATURE_AUTOWIDTH( \
+ "\n -w NUM Assume the terminal is NUM columns wide") \
+ "\n -x List entries by lines instead of by columns" \
+ USE_FEATURE_LS_SORTFILES( \
+ "\n -X Sort the listing by extension") \
USE_FEATURE_HUMAN_READABLE( \
- "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
- USE_SELINUX("\t-k\tprint security context\n") \
- USE_SELINUX("\t-K\tprint security context in long format\n")
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
+ USE_SELINUX( \
+ "\n -k Print security context") \
+ USE_SELINUX( \
+ "\n -K Print security context in long format")
#define lsattr_trivial_usage \
- "[-Radlv] [files...]"
+ "[-Radlv] [files...]"
#define lsattr_full_usage \
- "list file attributes on an ext2 fs\n\n" \
- "Options:\n" \
- "\t-R\trecursively list subdirectories\n" \
- "\t-a\tdo not hide entries starting with .\n" \
- "\t-d\tlist directory entries instead of contents\n" \
- "\t-l\tprint long flag names\n" \
- "\t-v\tlist the file's version/generation number"
+ "List file attributes on an ext2 fs" \
+ "\n\nOptions:\n" \
+ " -R Recursively list subdirectories\n" \
+ " -a Do not hide entries starting with .\n" \
+ " -d List directory entries instead of contents\n" \
+ " -l Print long flag names\n" \
+ " -v List the file's version/generation number"
#define lsmod_trivial_usage \
- ""
+ ""
#define lsmod_full_usage \
- "List the currently loaded kernel modules."
+ "List the currently loaded kernel modules"
#ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
- "NAME TYPE MAJOR MINOR FIRST LAST [s]"
+ "NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage \
- "Creates a range of block or character special files\n\n" \
- "TYPEs include:\n" \
- "\tb:\tMake a block (buffered) device.\n" \
- "\tc or u:\tMake a character (un-buffered) device.\n" \
- "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
- "FIRST specifies the number appended to NAME to create the first device.\n" \
- "LAST specifies the number of the last item that should be created\n" \
- "If 's' is the last argument, the base device is created as well.\n\n" \
- "For example:\n" \
- "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
- "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
+ "Create a range of block or character special files\n\n" \
+ "TYPEs include:\n" \
+ " b: Make a block (buffered) device\n" \
+ " c or u: Make a character (un-buffered) device\n" \
+ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \
+ "\n" \
+ "FIRST specifies the number appended to NAME to create the first device.\n" \
+ "LAST specifies the number of the last item that should be created\n" \
+ "If 's' is the last argument, the base device is created as well.\n\n" \
+ "For example:\n" \
+ " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
+ " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
- "# makedevs /dev/ttyS c 4 66 2 63\n" \
- "[creates ttyS2-ttyS63]\n" \
- "# makedevs /dev/hda b 3 0 0 8 s\n" \
- "[creates hda,hda1-hda8]\n"
+ "# makedevs /dev/ttyS c 4 66 2 63\n" \
+ "[creates ttyS2-ttyS63]\n" \
+ "# makedevs /dev/hda b 3 0 0 8 s\n" \
+ "[creates hda,hda1-hda8]\n"
#endif
#ifdef CONFIG_FEATURE_MAKEDEVS_TABLE
#define makedevs_trivial_usage \
- "[-d device_table] rootdir"
+ "[-d device_table] rootdir"
#define makedevs_full_usage \
- "Creates a range of special files as specified in a device table.\n" \
- "Device table entries take the form of:\n" \
- "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
- "Where name is the file name, type can be one of:\n" \
- " f A regular file\n" \
- " d Directory\n" \
- " c Character special device file\n" \
- " b Block special device file\n" \
- " p Fifo (named pipe)\n" \
- "uid is the user id for the target file, gid is the group id for the\n" \
- "target file. The rest of the entries (major, minor, etc) apply to\n" \
- "to device special files. A '-' may be used for blank entries."
+ "Create a range of special files as specified in a device table.\n" \
+ "Device table entries take the form of:\n" \
+ "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
+ "Where name is the file name, type can be one of:\n" \
+ " f A regular file\n" \
+ " d Directory\n" \
+ " c Character special device file\n" \
+ " b Block special device file\n" \
+ " p Fifo (named pipe)\n" \
+ "uid is the user id for the target file, gid is the group id for the\n" \
+ "target file. The rest of the entries (major, minor, etc) apply to\n" \
+ "to device special files. A '-' may be used for blank entries."
#define makedevs_example_usage \
- "For example:\n" \
- "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
- "/dev d 755 0 0 - - - - -\n" \
- "/dev/console c 666 0 0 5 1 - - -\n" \
- "/dev/null c 666 0 0 1 3 0 0 -\n" \
- "/dev/zero c 666 0 0 1 5 0 0 -\n" \
- "/dev/hda b 640 0 0 3 0 0 0 -\n" \
- "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
- "Will Produce:\n" \
- "/dev\n" \
- "/dev/console\n" \
- "/dev/null\n" \
- "/dev/zero\n" \
- "/dev/hda\n" \
- "/dev/hda[0-15]\n"
+ "For example:\n" \
+ "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
+ "/dev d 755 0 0 - - - - -\n" \
+ "/dev/console c 666 0 0 5 1 - - -\n" \
+ "/dev/null c 666 0 0 1 3 0 0 -\n" \
+ "/dev/zero c 666 0 0 1 5 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 0 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
+ "Will Produce:\n" \
+ "/dev\n" \
+ "/dev/console\n" \
+ "/dev/null\n" \
+ "/dev/zero\n" \
+ "/dev/hda\n" \
+ "/dev/hda[0-15]\n"
#endif
#define md5sum_trivial_usage \
- "[OPTION] [FILEs...]" \
+ "[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
- "Options:\n" \
- "With no FILE, or when FILE is -, read standard input." \
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
+ "\n\nOptions:\n" \
+ "With no FILE, or when FILE is -, read standard input." \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
- "\t-c\tcheck MD5 sums against given list\n" \
- "\nThe following two options are useful only when verifying checksums:\n" \
- "\t-s\tdon't output anything, status code shows success\n" \
- "\t-w\twarn about improperly formatted MD5 checksum lines")
+ " -c Check MD5 sums against given list\n" \
+ "\nThe following two options are useful only when verifying checksums:\n" \
+ " -s Don't output anything, status code shows success\n" \
+ " -w Warn about improperly formatted MD5 checksum lines")
#define md5sum_example_usage \
- "$ md5sum < busybox\n" \
- "6fd11e98b98a58f64ff3398d7b324003\n" \
- "$ md5sum busybox\n" \
- "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
- "$ md5sum -c -\n" \
- "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
- "busybox: OK\n" \
- "^D\n"
+ "$ md5sum < busybox\n" \
+ "6fd11e98b98a58f64ff3398d7b324003\n" \
+ "$ md5sum busybox\n" \
+ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
+ "$ md5sum -c -\n" \
+ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
+ "busybox: OK\n" \
+ "^D\n"
#define mdev_trivial_usage \
- "[-s]"
+ "[-s]"
#define mdev_full_usage \
- "\t-s\tScan /sys and populate /dev during system boot\n\n" \
- "Called with no options (via hotplug) it uses environment variables\n" \
- "to determine which device to add/remove."
+ " -s Scan /sys and populate /dev during system boot\n\n" \
+ "Called with no options (via hotplug) it uses environment variables\n" \
+ "to determine which device to add/remove."
#define mdev_notes_usage "" \
-USE_FEATURE_MDEV_CONFIG( \
- "The mdev config file contains lines that look like:\n" \
- " hd[a-z][0-9]* 0:3 660\n\n" \
- "That's device name (with regex match), uid:gid, and permissions.\n\n" \
+ USE_FEATURE_MDEV_CONFIG( \
+ "The mdev config file contains lines that look like:\n" \
+ " hd[a-z][0-9]* 0:3 660\n\n" \
+ "That's device name (with regex match), uid:gid, and permissions.\n\n" \
USE_FEATURE_MDEV_EXEC( \
- "Optionally, that can be followed (on the same line) by a special character\n" \
- "and a command line to run after creating/before deleting the corresponding\n" \
- "device(s). The environment variable $MDEV indicates the active device node\n" \
- "(which is useful if it's a regex match). For example:\n\n" \
- " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
- "The special characters are @ (run after creating), $ (run before deleting),\n" \
- "and * (run both after creating and before deleting). The commands run in\n" \
- "the /dev directory, and use system() which calls /bin/sh.\n\n" \
+ "Optionally, that can be followed (on the same line) by a special character\n" \
+ "and a command line to run after creating/before deleting the corresponding\n" \
+ "device(s). The environment variable $MDEV indicates the active device node\n" \
+ "(which is useful if it's a regex match). For example:\n\n" \
+ " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
+ "The special characters are @ (run after creating), $ (run before deleting),\n" \
+ "and * (run both after creating and before deleting). The commands run in\n" \
+ "the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
- "Config file parsing stops on the first matching line. If no config\n"\
- "entry is matched, devices are created with default 0:0 660. (Make\n"\
- "the last line match .* to override this.)\n\n" \
-)
+ "Config file parsing stops on the first matching line. If no config\n"\
+ "entry is matched, devices are created with default 0:0 660. (Make\n"\
+ "the last line match .* to override this.)\n\n" \
+ )
#define mesg_trivial_usage \
- "[y|n]"
+ "[y|n]"
#define mesg_full_usage \
- "mesg controls write access to your terminal\n" \
- "\ty\tAllow write access to your terminal\n" \
- "\tn\tDisallow write access to your terminal"
+ "Control write access to your terminal\n" \
+ " y Allow write access to your terminal\n" \
+ " n Disallow write access to your terminal"
#define mkdir_trivial_usage \
- "[OPTION] DIRECTORY..."
+ "[OPTION] DIRECTORY..."
#define mkdir_full_usage \
- "Create the DIRECTORY(ies) if they do not already exist\n\n" \
- "Options:\n" \
- "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
- "\t-p\tno error if existing, make parent directories as needed"
+ "Create the DIRECTORY(ies) if they do not already exist" \
+ "\n\nOptions:\n" \
+ " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
+ " -p No error if existing, make parent directories as needed"
#define mkdir_example_usage \
- "$ mkdir /tmp/foo\n" \
- "$ mkdir /tmp/foo\n" \
- "/tmp/foo: File exists\n" \
- "$ mkdir /tmp/foo/bar/baz\n" \
- "/tmp/foo/bar/baz: No such file or directory\n" \
- "$ mkdir -p /tmp/foo/bar/baz\n"
+ "$ mkdir /tmp/foo\n" \
+ "$ mkdir /tmp/foo\n" \
+ "/tmp/foo: File exists\n" \
+ "$ mkdir /tmp/foo/bar/baz\n" \
+ "/tmp/foo/bar/baz: No such file or directory\n" \
+ "$ mkdir -p /tmp/foo/bar/baz\n"
#define mke2fs_trivial_usage \
- "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
- "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
- "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
- "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
- "[-M last-mounted-directory] [-S] [-T filesystem-type] " \
- "device [blocks-count]"
+ "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
+ "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
+ "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
+ "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
+ "[-M last-mounted-directory] [-S] [-T filesystem-type] " \
+ "device [blocks-count]"
#define mke2fs_full_usage \
- "\t-b size\tblock size in bytes\n" \
- "\t-c\tcheck for bad blocks before creating\n" \
- "\t-E opts\tset extended options\n" \
- "\t-f size\tfragment size in bytes\n" \
- "\t-F\tforce (ignore sanity checks)\n" \
- "\t-g num\tnumber of blocks in a block group\n" \
- "\t-i ratio\tthe bytes/inode ratio\n" \
- "\t-j\tcreate a journal (ext3)\n" \
- "\t-J opts\tset journal options (size/device)\n" \
- "\t-l file\tread bad blocks list from file\n" \
- "\t-L lbl\tset the volume label\n" \
- "\t-m percent\tpercent of fs blocks to reserve for admin\n" \
- "\t-M dir\tset last mounted directory\n" \
- "\t-n\tdo not actually create anything\n" \
- "\t-N num\tnumber of inodes to create\n" \
- "\t-o os\tset the 'creator os' field\n" \
- "\t-O features\tdir_index/filetype/has_journal/journal_dev/sparse_super\n" \
- "\t-q\tquiet execution\n" \
- "\t-r rev\tset filesystem revision\n" \
- "\t-S\twrite superblock and group descriptors only\n" \
- "\t-T fs-type\tset usage type (news/largefile/largefile4)\n" \
- "\t-v\tverbose execution"
+ " -b size Block size in bytes\n" \
+ " -c Check for bad blocks before creating\n" \
+ " -E opts Set extended options\n" \
+ " -f size Fragment size in bytes\n" \
+ " -F Force (ignore sanity checks)\n" \
+ " -g num Number of blocks in a block group\n" \
+ " -i ratio The bytes/inode ratio\n" \
+ " -j Create a journal (ext3)\n" \
+ " -J opts Set journal options (size/device)\n" \
+ " -l file Read bad blocks list from file\n" \
+ " -L lbl Set the volume label\n" \
+ " -m percent Percent of fs blocks to reserve for admin\n" \
+ " -M dir Set last mounted directory\n" \
+ " -n Do not actually create anything\n" \
+ " -N num Number of inodes to create\n" \
+ " -o os Set the 'creator os' field\n" \
+ " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
+ " -q Quiet execution\n" \
+ " -r rev Set filesystem revision\n" \
+ " -S Write superblock and group descriptors only\n" \
+ " -T fs-type Set usage type (news/largefile/largefile4)\n" \
+ " -v Verbose execution"
#define mkfifo_trivial_usage \
- "[OPTIONS] name"
+ "[OPTIONS] name"
#define mkfifo_full_usage \
- "Creates a named pipe (identical to 'mknod name p')\n\n" \
- "Options:\n" \
- "\t-m\tcreate the pipe using the specified mode (default a=rw)"
+ "Create a named pipe (identical to 'mknod name p')" \
+ "\n\nOptions:\n" \
+ " -m Create the pipe using the specified mode (default a=rw)"
#define mkfs_minix_trivial_usage \
- "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
+ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
- "Make a MINIX filesystem.\n\n" \
- "Options:\n" \
- "\t-c\t\tCheck the device for bad blocks\n" \
- "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
- "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
- "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
- "\t-v\t\tMake a Minix version 2 filesystem"
+ "Make a MINIX filesystem" \
+ "\n\nOptions:\n" \
+ " -c Check the device for bad blocks\n" \
+ " -n [14|30] Specify the maximum length of filenames\n" \
+ " -i INODES Specify the number of inodes for the filesystem\n" \
+ " -l FILENAME Read the bad blocks list from FILENAME\n" \
+ " -v Make a Minix version 2 filesystem"
#define mknod_trivial_usage \
- "[OPTIONS] NAME TYPE MAJOR MINOR"
+ "[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
- "Create a special file (block, character, or pipe).\n\n" \
- "Options:\n" \
- "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
- "TYPEs include:\n" \
- "\tb:\tMake a block (buffered) device\n" \
- "\tc or u:\tMake a character (un-buffered) device\n" \
- "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes"
+ "Create a special file (block, character, or pipe)" \
+ "\n\nOptions:\n" \
+ " -m Create the special file using the specified mode (default a=rw)" \
+ "\n\nTYPEs include:\n" \
+ " b: Make a block (buffered) device\n" \
+ " c or u: Make a character (un-buffered) device\n" \
+ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
#define mknod_example_usage \
- "$ mknod /dev/fd0 b 2 0\n" \
- "$ mknod -m 644 /tmp/pipe p\n"
+ "$ mknod /dev/fd0 b 2 0\n" \
+ "$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
- "[-c] [-v0|-v1] device [block-count]"
+ "[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
- "Prepare a disk partition to be used as a swap partition.\n\n" \
- "Options:\n" \
- "\t-c\t\tCheck for read-ability\n" \
- "\t-v0\t\tMake version 0 swap [max 128 Megs]\n" \
- "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117)\n" \
- "\tblock-count\tNumber of block to use (default is entire partition)"
+ "Prepare a disk partition to be used as swap partition" \
+ "\n\nOptions:\n" \
+ " -c Check for read-ability\n" \
+ " -v0 Make version 0 swap [max 128 Megs]\n" \
+ " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
+ " block-count Number of block to use (default is entire partition)"
#define mktemp_trivial_usage \
- "[-dq] TEMPLATE"
+ "[-dq] TEMPLATE"
#define mktemp_full_usage \
- "Creates a temporary file with its name based on TEMPLATE.\n" \
- "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \
- "Options:\n" \
- "\t-d\t\tMake a directory instead of a file\n" \
- "\t-q\t\tFail silently if an error occurs"
+ "Create a temporary file with its name based on TEMPLATE.\n" \
+ "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \
+ "\n\nOptions:\n" \
+ " -d Make a directory instead of a file\n" \
+ " -q Fail silently if an error occurs"
#define mktemp_example_usage \
- "$ mktemp /tmp/temp.XXXXXX\n" \
- "/tmp/temp.mWiLjM\n" \
- "$ ls -la /tmp/temp.mWiLjM\n" \
- "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
+ "$ mktemp /tmp/temp.XXXXXX\n" \
+ "/tmp/temp.mWiLjM\n" \
+ "$ ls -la /tmp/temp.mWiLjM\n" \
+ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
- "[-knqrsv] MODULE [symbol=value ...]"
+ "[-knqrsv] MODULE [symbol=value ...]"
#define modprobe_full_usage \
- "Options:\n" \
- "\t-k\tMake module autoclean-able\n" \
- "\t-n\tJust show what would be done\n" \
- "\t-q\tQuiet output\n" \
- "\t-r\tRemove module (stacks) or do autoclean\n" \
- "\t-s\tReport via syslog instead of stderr\n" \
- "\t-v\tVerbose output"
+ "Options:\n" \
+ " -k Make module autoclean-able\n" \
+ " -n Just show what would be done\n" \
+ " -q Quiet output\n" \
+ " -r Remove module (stacks) or do autoclean\n" \
+ " -s Report via syslog instead of stderr\n" \
+ " -v Verbose output"
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
"the options from the config file. That way, you can have defaults in the config\n" \
"file, and override them for a specific usage from the command line.\n"
#define modprobe_example_usage \
- "(with the above /etc/modules.conf):\n\n" \
- "$ modprobe tulip\n" \
- " will load the module 'tulip' with default option 'irq=3'\n\n" \
- "$ modprobe tulip irq=5\n" \
- " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
- "$ modprobe tulip2\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
- " which are the default for alias 'tulip2'\n\n" \
- "$ modprobe tulip2 irq=8\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
- " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
- " from the command line\n\n" \
- "$ modprobe tulip2 irq=2 io=0x210\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
- " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
- " from the command line\n"
+ "(with the above /etc/modules.conf):\n\n" \
+ "$ modprobe tulip\n" \
+ " will load the module 'tulip' with default option 'irq=3'\n\n" \
+ "$ modprobe tulip irq=5\n" \
+ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
+ "$ modprobe tulip2\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
+ " which are the default for alias 'tulip2'\n\n" \
+ "$ modprobe tulip2 irq=8\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
+ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
+ " from the command line\n\n" \
+ "$ modprobe tulip2 irq=2 io=0x210\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
+ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
+ " from the command line\n"
#define more_trivial_usage \
- "[FILE ...]"
+ "[FILE ...]"
#define more_full_usage \
- "More is a filter for viewing FILE one screenful at a time."
+ "View FILE or standard input one screenful at a time"
#define more_example_usage \
- "$ dmesg | more\n"
+ "$ dmesg | more\n"
#define mount_trivial_usage \
- "[flags] DEVICE NODE [-o options,more-options]"
+ "[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \
- "Flags:\n" \
- "\t-a:\t\tMount all filesystems in fstab\n" \
+ "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
+ "\n\nOptions:\n" \
+ " -a Mount all filesystems in fstab\n" \
USE_FEATURE_MTAB_SUPPORT( \
- "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \
- "\t-n:\t\tDon't write a mount table entry\n" \
+ " -f \"Fake\" Add entry to mount table but don't mount it\n" \
+ " -n Don't write a mount table entry\n" \
) \
- "\t-o option:\tOne of many filesystem options, listed below\n" \
- "\t-r:\t\tMount the filesystem read-only\n" \
- "\t-t fs-type:\tSpecify the filesystem type\n" \
- "\t-w:\t\tMount for reading and writing (default)\n" \
- "\n" \
- "Options for use with the \"-o\" flag:\n" \
+ " -o option One of many filesystem options, listed below\n" \
+ " -r Mount the filesystem read-only\n" \
+ " -t fs-type Specify the filesystem type\n" \
+ " -w Mount for reading and writing (default)\n" \
+ "\n" \
+ "Options for use with the \"-o\" flag:\n" \
USE_FEATURE_MOUNT_LOOP( \
- "\tloop:\t\tIgnored (loop devices are autodetected)\n" \
+ " loop Ignored (loop devices are autodetected)\n" \
) \
USE_FEATURE_MOUNT_FLAGS( \
- "\t[a]sync:\tWrites are asynchronous / synchronous\n" \
- "\t[no]atime:\tDisable / enable updates to inode access times\n" \
- "\t[no]diratime:\tDisable / enable atime updates to directories\n" \
- "\t[no]dev:\tAllow use of special device files / disallow them\n" \
- "\t[no]exec:\tAllow use of executable files / disallow them\n" \
- "\t[no]suid:\tAllow set-user-id-root programs / disallow them\n" \
- "\t[r]shared:\tConvert [recursively] to a shared subtree.\n" \
- "\t[r]slave:\tConvert [recursively] to a slave subtree.\n" \
- "\t[r]private:\tConvert [recursively] to a private subtree\n" \
- "\t[un]bindable:\tMake mount point [un]able to be bind mounted.\n" \
- "\tbind:\t\tBind a directory to an additional location\n" \
- "\tmove:\t\tRelocate an existing mount point.\n" \
+ " [a]sync Writes are asynchronous / synchronous\n" \
+ " [no]atime Disable / enable updates to inode access times\n" \
+ " [no]diratime Disable / enable atime updates to directories\n" \
+ " [no]dev Allow use of special device files / disallow them\n" \
+ " [no]exec Allow use of executable files / disallow them\n" \
+ " [no]suid Allow set-user-id-root programs / disallow them\n" \
+ " [r]shared Convert [recursively] to a shared subtree\n" \
+ " [r]slave Convert [recursively] to a slave subtree\n" \
+ " [r]private Convert [recursively] to a private subtree\n" \
+ " [un]bindable Make mount point [un]able to be bind mounted\n" \
+ " bind Bind a directory to an additional location\n" \
+ " move Relocate an existing mount point\n" \
) \
- "\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \
- "\tro/rw:\t\tMount for read-only / read-write\n" \
- "\nThere are EVEN MORE flags that are specific to each filesystem\n" \
- "You'll have to see the written documentation for those filesystems"
+ " remount Remount a mounted filesystem, changing its flags\n" \
+ " ro/rw Mount for read-only / read-write\n" \
+ "\n" \
+ "There are EVEN MORE flags that are specific to each filesystem\n" \
+ "You'll have to see the written documentation for those filesystems"
#define mount_example_usage \
- "$ mount\n" \
- "/dev/hda3 on / type minix (rw)\n" \
- "proc on /proc type proc (rw)\n" \
- "devpts on /dev/pts type devpts (rw)\n" \
- "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
- "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
- "$ mount cd_image.iso mydir\n"
+ "$ mount\n" \
+ "/dev/hda3 on / type minix (rw)\n" \
+ "proc on /proc type proc (rw)\n" \
+ "devpts on /dev/pts type devpts (rw)\n" \
+ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
+ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
+ "$ mount cd_image.iso mydir\n"
#define mount_notes_usage \
- "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
+ "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
#define mountpoint_trivial_usage \
- "[-q] <[-d] DIR | -x DEVICE>"
+ "[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
- "mountpoint checks if the directory is a mountpoint\n\n" \
- "Options:\n" \
- "\t-q:\t\tBe more quiet\n" \
- "\t-d:\t\tPrint major/minor device number of the filesystem\n" \
- "\t-x:\t\tPrint major/minor device number of the blockdevice"
+ "mountpoint checks if the directory is a mountpoint" \
+ "\n\nOptions:\n" \
+ " -q Be more quiet\n" \
+ " -d Print major/minor device number of the filesystem\n" \
+ " -x Print major/minor device number of the blockdevice"
#define mountpoint_example_usage \
- "$ mountpoint /proc\n" \
- "/proc is not a mountpoint\n" \
- "$ mountpoint /sys\n" \
- "/sys is a mountpoint\n"
+ "$ mountpoint /proc\n" \
+ "/proc is not a mountpoint\n" \
+ "$ mountpoint /sys\n" \
+ "/sys is a mountpoint\n"
#define mt_trivial_usage \
- "[-f device] opcode value"
+ "[-f device] opcode value"
#define mt_full_usage \
- "Control magnetic tape drive operation\n" \
- "\nAvailable Opcodes:\n\n" \
- "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
- "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
- "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
- "setpart tell unload unlock weof wset"
+ "Control magnetic tape drive operation\n" \
+ "\nAvailable Opcodes:\n\n" \
+ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
+ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
+ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
+ "setpart tell unload unlock weof wset"
#define mv_trivial_usage \
- "[OPTION]... SOURCE DEST\n" \
- "or: mv [OPTION]... SOURCE... DIRECTORY"
+ "[OPTION]... SOURCE DEST\n" \
+ "or: mv [OPTION]... SOURCE... DIRECTORY"
#define mv_full_usage \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
- "Options:\n" \
- "\t-f\tdon't prompt before overwriting\n" \
- "\t-i\tinteractive, prompt before overwrite"
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
+ "\n\nOptions:\n" \
+ " -f Don't prompt before overwriting\n" \
+ " -i Interactive, prompt before overwrite"
#define mv_example_usage \
- "$ mv /tmp/foo /bin/bar\n"
+ "$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
- "[-s] [-c FILE] [{IFNAME MACADDR}]"
+ "[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
- "Nameif renames network interface while it in the down state.\n\n" \
- "Options:\n" \
- "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
- "\t-s\t\tUse syslog (LOCAL0 facility)\n" \
- "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
+ "Rename network interface while it in the down state" \
+ "\n\nOptions:\n" \
+ " -c FILE Use configuration file (default is /etc/mactab)\n" \
+ " -s Use syslog (LOCAL0 facility)\n" \
+ " IFNAME MACADDR new_interface_name interface_mac_address"
#define nameif_example_usage \
- "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
- " or\n" \
- "$ nameif -c /etc/my_mactab_file\n" \
+ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+ " or\n" \
+ "$ nameif -c /etc/my_mactab_file\n" \
#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
-#define NC_BR1 "["
-#define NC_BR2 "]"
#define NC_OPTIONS_STR "\n\nOptions:"
#else
-#define NC_BR1
-#define NC_BR2
#define NC_OPTIONS_STR
#endif
#define nc_trivial_usage \
- NC_BR1 USE_NC_EXTRA("iw")USE_NC_SERVER("-l") NC_BR2 USE_NC_SERVER(" [-p PORT]") \
- " [" USE_NC_EXTRA("-f FILENAME|") "{IPADDR PORTNUM}]" USE_NC_EXTRA(" [-e COMMAND]")
+ USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \
+ "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]")
#define nc_full_usage \
- "Netcat opens a pipe to IP:port" USE_NC_EXTRA(" or file") \
+ "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
NC_OPTIONS_STR \
USE_NC_EXTRA( \
- "\n\t-e\texec rest of command line after connect\n" \
- "\t-i SECS\tdelay interval for lines sent\n" \
- "\t-w SECS\ttimeout for connect\n" \
- "\t-f file\tuse file (ala /dev/ttyS0) instead of network" \
+ "\n -e Exec rest of command line after connect" \
+ "\n -i SECS Delay interval for lines sent" \
+ "\n -w SECS Timeout for connect" \
+ "\n -f file Use file (ala /dev/ttyS0) instead of network" \
) \
USE_NC_SERVER( \
- "\n\t-l\tlisten mode, for inbound connects\n" \
- USE_NC_EXTRA("\t\t(use -l twice with -e for persistent server)\n") \
- "\t-p PORT\tlocal port number" \
+ "\n -l Listen mode, for inbound connects" \
+ USE_NC_EXTRA( \
+ "\n (use -l twice with -e for persistent server)") \
+ "\n -p PORT Local port number" \
)
#define nc_notes_usage "" \
USE_NC_EXTRA( \
- "To use netcat as a terminal emulator on a serial port:\n\n" \
- "$ stty 115200 -F /dev/ttyS0\n" \
- "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
- ) ""
+ "To use netcat as a terminal emulator on a serial port:\n\n" \
+ "$ stty 115200 -F /dev/ttyS0\n" \
+ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
+ )
#define nc_example_usage \
- "$ nc foobar.somedomain.com 25\n" \
- "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
- "help\n" \
- "214-Commands supported:\n" \
- "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
- "214 NOOP QUIT RSET HELP\n" \
- "quit\n" \
- "221 foobar closing connection\n"
+ "$ nc foobar.somedomain.com 25\n" \
+ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
+ "help\n" \
+ "214-Commands supported:\n" \
+ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
+ "214 NOOP QUIT RSET HELP\n" \
+ "quit\n" \
+ "221 foobar closing connection\n"
#define netstat_trivial_usage \
- "[-laenrtuwx]"
+ "[-laenrtuwx]"
#define netstat_full_usage \
- "Netstat displays Linux networking information.\n\n" \
- "Options:\n" \
- "\t-l display listening server sockets\n" \
- "\t-a display all sockets (default: connected)\n" \
- "\t-e display other/more information\n" \
- "\t-n don't resolve names\n" \
- "\t-r display routing table\n" \
- "\t-t tcp sockets\n" \
- "\t-u udp sockets\n" \
- "\t-w raw sockets\n" \
- "\t-x unix sockets"
+ "Display networking information" \
+ "\n\nOptions:\n" \
+ " -l Display listening server sockets\n" \
+ " -a Display all sockets (default: connected)\n" \
+ " -e Display other/more information\n" \
+ " -n Don't resolve names\n" \
+ " -r Display routing table\n" \
+ " -t Tcp sockets\n" \
+ " -u Udp sockets\n" \
+ " -w Raw sockets\n" \
+ " -x Unix sockets"
#define nice_trivial_usage \
- "[-n ADJUST] [COMMAND [ARG] ...]"
+ "[-n ADJUST] [COMMAND [ARG] ...]"
#define nice_full_usage \
- "Nice runs a program with modified scheduling priority.\n\n" \
- "Options:\n" \
- "\t-n ADJUST\tAdjust the scheduling priority by ADJUST"
+ "Run a program with modified scheduling priority" \
+ "\n\nOptions:\n" \
+ " -n ADJUST Adjust the scheduling priority by ADJUST"
#define nmeter_trivial_usage \
- "format_string"
+ "format_string"
#define nmeter_full_usage \
- "Nmeter monitors your system in real time.\n\n" \
- "Format specifiers:\n" \
- "%Nc or %[cN] monitor CPU. N - bar size, default 10\n" \
- " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
- "%[niface] monitor network interface 'iface'\n" \
- "%m monitor allocated memory\n" \
- "%[mf] monitor free memory\n" \
- "%[mt] monitor total memory\n" \
- "%s monitor allocated swap\n" \
- "%f monitor number of used file descriptors\n" \
- "%Ni monitor total/specific IRQ rate\n" \
- "%x monitor context switch rate\n" \
- "%p monitor forks\n" \
- "%[pn] monitor # of processes\n" \
- "%b monitor block io\n" \
- "%Nt show time (with N decimal points)\n" \
- "%Nd milliseconds between updates (default=1000)\n" \
- "%r print <cr> instead of <lf> at EOL"
+ "Monitor system in real time\n\n" \
+ "Format specifiers:\n" \
+ "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
+ " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
+ "%[niface] Monitor network interface 'iface'\n" \
+ "%m Monitor allocated memory\n" \
+ "%[mf] Monitor free memory\n" \
+ "%[mt] Monitor total memory\n" \
+ "%s Monitor allocated swap\n" \
+ "%f Monitor number of used file descriptors\n" \
+ "%Ni Monitor total/specific IRQ rate\n" \
+ "%x Monitor context switch rate\n" \
+ "%p Monitor forks\n" \
+ "%[pn] Monitor # of processes\n" \
+ "%b Monitor block io\n" \
+ "%Nt Show time (with N decimal points)\n" \
+ "%Nd Milliseconds between updates (default=1000)\n" \
+ "%r Print <cr> instead of <lf> at EOL"
#define nmeter_example_usage \
- "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
+ "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
- "COMMAND [ARGS]"
+ "COMMAND [ARGS]"
#define nohup_full_usage \
- "run a command immune to hangups, with output to a non-tty"
+ "Run a command immune to hangups, with output to a non-tty"
#define nohup_example_usage \
- "$ nohup make &"
+ "$ nohup make &"
#define nslookup_trivial_usage \
- "[HOST] [SERVER]"
+ "[HOST] [SERVER]"
#define nslookup_full_usage \
- "Queries the nameserver for the IP address of the given HOST\n" \
- "optionally using a specified DNS server"
+ "Query the nameserver for the IP address of the given HOST\n" \
+ "optionally using a specified DNS server"
#define nslookup_example_usage \
- "$ nslookup localhost\n" \
- "Server: default\n" \
- "Address: default\n" \
- "\n" \
- "Name: debian\n" \
- "Address: 127.0.0.1\n"
+ "$ nslookup localhost\n" \
+ "Server: default\n" \
+ "Address: default\n" \
+ "\n" \
+ "Name: debian\n" \
+ "Address: 127.0.0.1\n"
#define od_trivial_usage \
- "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
+ "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
#define od_full_usage \
- "Write an unambiguous representation, octal bytes by default, of FILE\n" \
- "to standard output. With no FILE, or when FILE is -, read standard input."
+ "Write an unambiguous representation, octal bytes by default, of FILE\n" \
+ "to standard output. With no FILE, or when FILE is -, read standard input."
#define openvt_trivial_usage \
- "<vtnum> <COMMAND> [ARGS...]"
+ "<vtnum> <COMMAND> [ARGS...]"
#define openvt_full_usage \
- "Start a command on a new virtual terminal"
+ "Start a command on a new virtual terminal"
#define openvt_example_usage \
- "openvt 2 /bin/ash\n"
+ "openvt 2 /bin/ash\n"
#define passwd_trivial_usage \
- "[OPTION] [name]"
+ "[OPTION] [name]"
#define passwd_full_usage \
- "Change a user password. If no name is specified,\n" \
- "changes the password for the current user.\n" \
- "Options:\n" \
- "\t-a\tDefine which algorithm shall be used for the password\n" \
- "\t\t\t(Choices: des, md5, sha1)\n" \
- "\t-d\tDelete the password for the specified user account\n" \
- "\t-l\tLocks (disables) the specified user account\n" \
- "\t-u\tUnlocks (re-enables) the specified user account"
+ "Change a user password. If no name is specified,\n" \
+ "changes the password for the current user." \
+ "\n\nOptions:\n" \
+ " -a Define which algorithm shall be used for the password\n" \
+ " (choices: des, md5)\n" /* ", sha1)" */ \
+ " -d Delete the password for the specified user account\n" \
+ " -l Locks (disables) the specified user account\n" \
+ " -u Unlocks (re-enables) the specified user account"
#define patch_trivial_usage \
- "[-p<num>] [-i <diff>]"
+ "[-p<num>] [-i <diff>]"
#define patch_full_usage \
- "\t-p <num>\tStrip <num> leading components from file names\n" \
- "\t-i <diff>\tRead <diff> instead of stdin"
+ " -p NUM Strip NUM leading components from file names\n" \
+ " -i DIFF Read DIFF instead of stdin"
#define patch_example_usage \
- "$ patch -p1 < example.diff\n" \
- "$ patch -p0 -i example.diff"
+ "$ patch -p1 < example.diff\n" \
+ "$ patch -p0 -i example.diff"
-#if ENABLE_FEATURE_PIDOF_SINGLE
-#define USAGE_FEATURE_PIDOF_SINGLE(a) a
-#else
-#define USAGE_FEATURE_PIDOF_SINGLE(a)
-#endif
-#if ENABLE_FEATURE_PIDOF_OMIT
-#define USAGE_FEATURE_PIDOF_OMIT(a) a
-#else
-#define USAGE_FEATURE_PIDOF_OMIT(a)
-#endif
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define USAGE_PIDOF "Options:"
#else
-#define USAGE_PIDOF "\n\tThis version of pidof accepts no options."
+#define USAGE_PIDOF "\nThis version of pidof accepts no options."
#endif
#define pidof_trivial_usage \
- "process-name [OPTION] [process-name ...]"
+ "process-name [OPTION] [process-name ...]"
#define pidof_full_usage \
- "Lists the PIDs of all processes with names that match the\n" \
- "names on the command line.\n" \
+ "List the PIDs of all processes with names that match the\n" \
+ "names on the command line\n" \
USAGE_PIDOF \
- USAGE_FEATURE_PIDOF_SINGLE("\n\t-s\t\tdisplay only a single PID") \
- USAGE_FEATURE_PIDOF_OMIT("\n\t-o\t\tomit given pid.") \
- USAGE_FEATURE_PIDOF_OMIT("\n\t\t\tUse %PPID to omit the parent pid of pidof itself")
+ USE_FEATURE_PIDOF_SINGLE( \
+ "\n -s Display only a single PID") \
+ USE_FEATURE_PIDOF_OMIT( \
+ "\n -o Omit given pid") \
+ USE_FEATURE_PIDOF_OMIT( \
+ "\n Use %PPID to omit the parent pid of pidof itself")
#define pidof_example_usage \
- "$ pidof init\n" \
- "1\n" \
- USAGE_FEATURE_PIDOF_OMIT("$ pidof /bin/sh\n20351 5973 5950\n") \
- USAGE_FEATURE_PIDOF_OMIT("$ pidof /bin/sh -o %PPID\n20351 5950")
+ "$ pidof init\n" \
+ "1\n" \
+ USE_FEATURE_PIDOF_OMIT( \
+ "$ pidof /bin/sh\n20351 5973 5950\n") \
+ USE_FEATURE_PIDOF_OMIT( \
+ "$ pidof /bin/sh -o %PPID\n20351 5950")
#ifndef CONFIG_FEATURE_FANCY_PING
-#define ping_trivial_usage "host"
-#define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
+#define ping_trivial_usage \
+ "host"
+#define ping_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
- "[OPTION]... host"
+ "[OPTION]... host"
#define ping_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
- "Options:\n" \
- "\t-c COUNT\tSend only COUNT pings\n" \
- "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \
- "\t-I IPADDR\tUse IPADDR as source address\n" \
- "\t-q\t\tQuiet mode, only displays output at start\n" \
- "\t\t\tand when finished"
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -I IP Use IP as source address\n" \
+ " -q Quiet mode, only displays output at start\n" \
+ " and when finished"
#endif
#define ping_example_usage \
- "$ ping localhost\n" \
- "PING slag (127.0.0.1): 56 data bytes\n" \
- "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
- "\n" \
- "--- debian ping statistics ---\n" \
- "1 packets transmitted, 1 packets received, 0% packet loss\n" \
- "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+ "$ ping localhost\n" \
+ "PING slag (127.0.0.1): 56 data bytes\n" \
+ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
+ "\n" \
+ "--- debian ping statistics ---\n" \
+ "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#ifndef CONFIG_FEATURE_FANCY_PING6
-#define ping6_trivial_usage "host"
-#define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
+#define ping6_trivial_usage \
+ "host"
+#define ping6_full_usage \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping6_trivial_usage \
- "[OPTION]... host"
+ "[OPTION]... host"
#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
- "Options:\n" \
- "\t-c COUNT\tSend only COUNT pings\n" \
- "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \
- "\t-q\t\tQuiet mode, only displays output at start\n" \
- "\t\t\tand when finished"
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
+ " -c CNT Send only CNT pings\n" \
+ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
+ " -q Quiet mode, only displays output at start\n" \
+ " and when finished"
#endif
#define ping6_example_usage \
- "$ ping6 ip6-localhost\n" \
- "PING ip6-localhost (::1): 56 data bytes\n" \
- "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
- "\n" \
- "--- ip6-localhost ping statistics ---\n" \
- "1 packets transmitted, 1 packets received, 0% packet loss\n" \
- "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+ "$ ping6 ip6-localhost\n" \
+ "PING ip6-localhost (::1): 56 data bytes\n" \
+ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
+ "\n" \
+ "--- ip6-localhost ping statistics ---\n" \
+ "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define pivot_root_trivial_usage \
- "NEW_ROOT PUT_OLD"
+ "NEW_ROOT PUT_OLD"
#define pivot_root_full_usage \
- "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
- "the new root file system."
+ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
+ "the new root file system"
#define poweroff_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d<delay>] [-n<nosync>] [-f<force>]"
#define poweroff_full_usage \
- "Halt and shut off power.\n" \
- "Options:\n" \
- "\t-d\t\tdelay interval for halting\n" \
- "\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce power off (don't go through init)"
+ "Halt and shut off power" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force power off (don't go through init)"
#define printenv_trivial_usage \
- "[VARIABLES...]"
+ "[VARIABLES...]"
#define printenv_full_usage \
- "print all or part of environment\n\n" \
- "If no environment VARIABLE specified, print them all."
+ "Print all or part of environment.\n" \
+ "If no environment VARIABLE specified, print them all."
#define printf_trivial_usage \
- "FORMAT [ARGUMENT...]"
+ "FORMAT [ARGUMENT...]"
#define printf_full_usage \
- "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
- "Where FORMAT controls the output exactly as in C printf."
+ "Format and print ARGUMENT(s) according to FORMAT,\n" \
+ "where FORMAT controls the output exactly as in C printf"
#define printf_example_usage \
- "$ printf \"Val=%d\\n\" 5\n" \
- "Val=5\n"
+ "$ printf \"Val=%d\\n\" 5\n" \
+ "Val=5\n"
+
+
+#if ENABLE_DESKTOP
+
+#define ps_trivial_usage \
+ ""
+#define ps_full_usage \
+ "Report process status" \
+ "\n\nOptions:" \
+ "\n -o col1,col2=header Select columns for display" \
+
+#else /* !ENABLE_DESKTOP */
#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
-#define USAGE_PS "\n\tThis version of ps accepts no options."
+#define USAGE_PS "\nThis version of ps accepts no options"
#else
#define USAGE_PS "\nOptions:"
#endif
-#if ENABLE_FEATURE_PS_WIDE
-#define USAGE_PS_WIDE(a) a
-#else
-#define USAGE_PS_WIDE(a)
-#endif
#define ps_trivial_usage \
- ""
+ ""
#define ps_full_usage \
- "Report process status\n" \
+ "Report process status\n" \
USAGE_PS \
- USE_SELINUX("\n\t-c\tshow SE Linux context") \
- USAGE_PS_WIDE("\n\tw\twide output")
+ USE_SELINUX( \
+ "\n -c Show SE Linux context") \
+ USE_FEATURE_PS_WIDE( \
+ "\n w Wide output")
+
+#endif /* ENABLE_DESKTOP */
#define ps_example_usage \
- "$ ps\n" \
- " PID Uid Gid State Command\n" \
- " 1 root root S init\n" \
- " 2 root root S [kflushd]\n" \
- " 3 root root S [kupdate]\n" \
- " 4 root root S [kpiod]\n" \
- " 5 root root S [kswapd]\n" \
- " 742 andersen andersen S [bash]\n" \
- " 743 andersen andersen S -bash\n" \
- " 745 root root S [getty]\n" \
- " 2990 andersen andersen R ps\n"
+ "$ ps\n" \
+ " PID Uid Gid State Command\n" \
+ " 1 root root S init\n" \
+ " 2 root root S [kflushd]\n" \
+ " 3 root root S [kupdate]\n" \
+ " 4 root root S [kpiod]\n" \
+ " 5 root root S [kswapd]\n" \
+ " 742 andersen andersen S [bash]\n" \
+ " 743 andersen andersen S -bash\n" \
+ " 745 root root S [getty]\n" \
+ " 2990 andersen andersen R ps\n"
+
#define pwd_trivial_usage \
- ""
+ ""
#define pwd_full_usage \
- "Print the full filename of the current working directory."
+ "Print the full filename of the current working directory"
#define pwd_example_usage \
- "$ pwd\n" \
- "/root\n"
+ "$ pwd\n" \
+ "/root\n"
#define raidautorun_trivial_usage \
- "DEVICE"
+ "DEVICE"
#define raidautorun_full_usage \
- "Tells the kernel to automatically search and start RAID arrays"
+ "Tell the kernel to automatically search and start RAID arrays"
#define raidautorun_example_usage \
- "$ raidautorun /dev/md0"
+ "$ raidautorun /dev/md0"
#define rdate_trivial_usage \
- "[-sp] HOST"
+ "[-sp] HOST"
#define rdate_full_usage \
- "Get and possibly set the system date and time from a remote HOST.\n\n" \
- "Options:\n" \
- "\t-s\tSet the system date and time (default)\n" \
- "\t-p\tPrint the date and time"
+ "Get and possibly set the system date and time from a remote HOST" \
+ "\n\nOptions:\n" \
+ " -s Set the system date and time (default)\n" \
+ " -p Print the date and time"
#define readahead_trivial_usage \
- "[FILE]..."
+ "[FILE]..."
#define readahead_full_usage \
- "Preloads FILE(s) in RAM cache so that subsequent reads for those" \
- "files do not block on disk I/O."
+ "Preload FILE(s) in RAM cache so that subsequent reads for those" \
+ "files do not block on disk I/O"
#define readlink_trivial_usage \
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
- "Displays the value of a symbolic link." \
- USE_FEATURE_READLINK_FOLLOW("\n\nOptions:\n" \
- "\t-f\tcanonicalize by following all symlinks")
+ "Display the value of a symbolic link" \
+ USE_FEATURE_READLINK_FOLLOW( \
+ "\n\nOptions:\n" \
+ " -f Canonicalize by following all symlinks")
#define readprofile_trivial_usage \
- "[OPTIONS]..."
+ "[OPTIONS]..."
#define readprofile_full_usage \
- "Options:\n" \
- "\t -m <mapfile> (default: /boot/System.map)\n" \
- "\t -p <profile> (default: /proc/profile)\n" \
- "\t -M <mult> set the profiling multiplier to <mult>\n" \
- "\t -i print only info about the sampling step\n" \
- "\t -v print verbose data\n" \
- "\t -a print all symbols, even if count is 0\n" \
- "\t -b print individual histogram-bin counts\n" \
- "\t -s print individual counters within functions\n" \
- "\t -r reset all the counters (root only)\n" \
- "\t -n disable byte order auto-detection"
+ "Options:\n" \
+ " -m <mapfile> (Default: /boot/System.map)\n" \
+ " -p <profile> (Default: /proc/profile)\n" \
+ " -M <mult> Set the profiling multiplier to <mult>\n" \
+ " -i Print only info about the sampling step\n" \
+ " -v Print verbose data\n" \
+ " -a Print all symbols, even if count is 0\n" \
+ " -b Print individual histogram-bin counts\n" \
+ " -s Print individual counters within functions\n" \
+ " -r Reset all the counters (root only)\n" \
+ " -n Disable byte order auto-detection"
#define realpath_trivial_usage \
- "pathname ..."
+ "pathname ..."
#define realpath_full_usage \
- "Returns the absolute pathnames of given argument."
+ "Return the absolute pathnames of given argument"
#define reboot_trivial_usage \
- "[-d<delay>] [-n<nosync>] [-f<force>]"
+ "[-d<delay>] [-n<nosync>] [-f<force>]"
#define reboot_full_usage \
- "Reboot the system.\n" \
- "Options:\n" \
- "\t-d\t\tdelay interval for rebooting\n" \
- "\t-n\t\tno call to sync()\n" \
- "\t-f\t\tforce reboot (don't go through init)"
+ "Reboot the system" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for rebooting\n" \
+ " -n No call to sync()\n" \
+ " -f Force reboot (don't go through init)"
#define renice_trivial_usage \
- "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
+ "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
- "Changes priority of running processes.\n\n" \
- "Options:\n" \
- "\t-n\tadjusts current nice value (smaller is faster)\n" \
- "\t-p\tprocess id(s) (default)\n" \
- "\t-g\tprocess group id(s)\n" \
- "\t-u\tprocess user name(s) and/or id(s)"
+ "Change priority of running processes" \
+ "\n\nOptions:\n" \
+ " -n Adjusts current nice value (smaller is faster)\n" \
+ " -p Process id(s) (default)\n" \
+ " -g Process group id(s)\n" \
+ " -u Process user name(s) and/or id(s)"
#define reset_trivial_usage \
- ""
+ ""
#define reset_full_usage \
- "Resets the screen."
+ "Reset the screen"
#define resize_trivial_usage \
- ""
+ ""
#define resize_full_usage \
- "Resizes the screen."
+ "Resize the screen"
#define rm_trivial_usage \
- "[OPTION]... FILE..."
+ "[OPTION]... FILE..."
#define rm_full_usage \
- "Remove (unlink) the FILE(s). You may use '--' to\n" \
- "indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
- "\t-i\t\talways prompt before removing each destination\n" \
- "\t-f\t\tremove existing destinations, never prompt\n" \
- "\t-r or -R\tremove the contents of directories recursively"
+ "Remove (unlink) the FILE(s). You may use '--' to\n" \
+ "indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
+ " -i Always prompt before removing each destination\n" \
+ " -f Remove existing destinations, never prompt\n" \
+ " -r,-R Remove the contents of directories recursively"
#define rm_example_usage \
- "$ rm -rf /tmp/foo\n"
+ "$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
- "[OPTION]... DIRECTORY..."
+ "[OPTION]... DIRECTORY..."
#define rmdir_full_usage \
- "Remove the DIRECTORY(ies), if they are empty."
+ "Remove the DIRECTORY, if it is empty"
#define rmdir_example_usage \
- "# rmdir /tmp/foo\n"
+ "# rmdir /tmp/foo\n"
#define rmmod_trivial_usage \
- "[OPTION]... [MODULE]..."
+ "[OPTION]... [MODULE]..."
#define rmmod_full_usage \
- "Unloads the specified kernel modules from the kernel.\n\n" \
- "Options:\n" \
- "\t-a\tRemove all unused modules (recursively)"
+ "Unload the specified kernel modules from the kernel" \
+ "\n\nOptions:\n" \
+ " -a Remove all unused modules (recursively)"
#define rmmod_example_usage \
- "$ rmmod tulip\n"
+ "$ rmmod tulip\n"
#define route_trivial_usage \
- "[{add|del|delete}]"
+ "[{add|del|delete}]"
#define route_full_usage \
- "Edit the kernel's routing tables.\n\n" \
- "Options:\n" \
- "\t-n\tDont resolve names\n" \
- "\t-e\tDisplay other/more information\n" \
- "\t-A inet" USE_FEATURE_IPV6("{6}") "\tSelect address family"
+ "Edit the kernel's routing tables" \
+ "\n\nOptions:\n" \
+ " -n Dont resolve names\n" \
+ " -e Display other/more information\n" \
+ " -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
#define rpm_trivial_usage \
- "-i -q[ildc]p package.rpm"
+ "-i -q[ildc]p package.rpm"
#define rpm_full_usage \
- "Manipulates RPM packages" \
- "\n\nOptions:" \
- "\n\t-i Install package" \
- "\n\t-q Query package" \
- "\n\t-p Query uninstalled package" \
- "\n\t-i Show information" \
- "\n\t-l List contents" \
- "\n\t-d List documents" \
- "\n\t-c List config files"
+ "Manipulate RPM packages" \
+ "\n\nOptions:" \
+ "\n -i Install package" \
+ "\n -q Query package" \
+ "\n -p Query uninstalled package" \
+ "\n -i Show information" \
+ "\n -l List contents" \
+ "\n -d List documents" \
+ "\n -c List config files"
#define rpm2cpio_trivial_usage \
- "package.rpm"
+ "package.rpm"
#define rpm2cpio_full_usage \
- "Outputs a cpio archive of the rpm file."
+ "Output a cpio archive of the rpm file"
#define run_parts_trivial_usage \
- "[-t] [-a ARG] [-u MASK] DIRECTORY"
+ "[-t] [-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
- "Run a bunch of scripts in a directory.\n\n" \
- "Options:\n" \
- "\t-t\tPrints what would be run, but does not actually run anything\n" \
- "\t-a ARG\tPass ARG as an argument for every program invoked\n" \
- "\t-u MASK\tSet the umask to MASK before executing every program"
+ "Run a bunch of scripts in a directory" \
+ "\n\nOptions:\n" \
+ " -t Prints what would be run, but does not actually run anything\n" \
+ " -a ARG Pass ARG as an argument for every program invoked\n" \
+ " -u MASK Set the umask to MASK before executing every program"
#define runlevel_trivial_usage \
- "[utmp]"
+ "[utmp]"
#define runlevel_full_usage \
- "Find the current and previous system runlevel.\n\n" \
- "If no utmp file exists or if no runlevel record can be found,\n" \
- "runlevel prints \"unknown\""
+ "Find the current and previous system runlevel.\n\n" \
+ "If no utmp file exists or if no runlevel record can be found,\n" \
+ "print \"unknown\""
#define runlevel_example_usage \
- "$ runlevel /var/run/utmp\n" \
- "N 2"
+ "$ runlevel /var/run/utmp\n" \
+ "N 2"
+
+#define runsv_trivial_usage \
+ "dir"
+#define runsv_full_usage \
+ "Start and monitor a service and optionally an appendant log service"
+
+#define runsvdir_trivial_usage \
+ "[-P] dir"
+#define runsvdir_full_usage \
+ "Start a runsv process for each subdirectory"
#define rx_trivial_usage \
- "FILE"
+ "FILE"
#define rx_full_usage \
- "Receive a file using the xmodem protocol."
+ "Receive a file using the xmodem protocol"
#define rx_example_usage \
- "$ rx /tmp/foo\n"
+ "$ rx /tmp/foo\n"
#define sed_trivial_usage \
- "[-efinr] pattern [files...]"
+ "[-efinr] pattern [files...]"
#define sed_full_usage \
- "Options:\n" \
- "\t-e script\tadd the script to the commands to be executed\n" \
- "\t-f scriptfile\tadd script-file contents to the\n" \
- "\t\t\tcommands to be executed\n" \
- "\t-i\t\tedit files in-place\n" \
- "\t-n\t\tsuppress automatic printing of pattern space\n" \
- "\t-r\t\tuse extended regular expression syntax\n" \
- "\n" \
- "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
- "script to interpret. All remaining arguments are names of input files; if no\n" \
- "input files are specified, then the standard input is read. Source files\n" \
- "will not be modified unless -i option is given."
+ "Options:\n" \
+ " -e script Add the script to the commands to be executed\n" \
+ " -f scriptfile Add script-file contents to the\n" \
+ " commands to be executed\n" \
+ " -i Edit files in-place\n" \
+ " -n Suppress automatic printing of pattern space\n" \
+ " -r Use extended regular expression syntax\n" \
+ "\n" \
+ "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
+ "script to interpret. All remaining arguments are names of input files; if no\n" \
+ "input files are specified, then the standard input is read. Source files\n" \
+ "will not be modified unless -i option is given."
#define sed_example_usage \
- "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
- "bar\n"
+ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
+ "bar\n"
#define seq_trivial_usage \
- "[first [increment]] last"
+ "[first [increment]] last"
#define seq_full_usage \
- "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
- "FIRST, INCREMENT default to 1\n" \
- "Arguments:\n" \
- "\tLAST\n" \
- "\tFIRST\tLAST\n" \
- "\tFIRST\tINCREMENT\tLAST"
+ "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
+ "FIRST, INCREMENT default to 1" \
+ "\n\nArguments:\n" \
+ " LAST\n" \
+ " FIRST LAST\n" \
+ " FIRST INCREMENT LAST"
#define setconsole_trivial_usage \
- "[-r|--reset] [DEVICE]"
+ "[-r|--reset] [DEVICE]"
#define setconsole_full_usage \
- "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \
- "Options:\n" \
- "\t-r\tReset output to /dev/console."
+ "Redirect system console output to DEVICE (default: /dev/tty)" \
+ "\n\nOptions:\n" \
+ " -r Reset output to /dev/console"
#define setkeycodes_trivial_usage \
- "SCANCODE KEYCODE ..."
+ "SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
- "Set entries into the kernel's scancode-to-keycode map,\n" \
- "allowing unusual keyboards to generate usable keycodes.\n\n" \
- "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
- "and KEYCODE is given in decimal"
+ "Set entries into the kernel's scancode-to-keycode map,\n" \
+ "allowing unusual keyboards to generate usable keycodes.\n\n" \
+ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
+ "and KEYCODE is given in decimal"
#define setkeycodes_example_usage \
- "$ setkeycodes e030 127\n"
+ "$ setkeycodes e030 127\n"
#define setlogcons_trivial_usage \
- "N"
+ "N"
#define setlogcons_full_usage \
- "Redirects the kernel output to console N (0 for current)."
+ "Redirect the kernel output to console N (0 for current)"
#define setsid_trivial_usage \
- "program [arg ...]"
+ "program [arg ...]"
#define setsid_full_usage \
- "Runs any program in a new session by calling setsid() before\n" \
- "exec'ing the rest of its arguments. See setsid(2) for details."
+ "Run any program in a new session by calling setsid() before\n" \
+ "exec'ing the rest of its arguments. See setsid(2) for details."
#define lash_trivial_usage \
- "[FILE]...\n" \
- "or: sh -c command [args]..."
+ "[FILE]...\n" \
+ "or: sh -c command [args]..."
#define lash_full_usage \
- "The BusyBox LAme SHell (command interpreter)"
+ "The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
- "This command does not yet have proper documentation.\n\n" \
- "Use lash just as you would use any other shell. It properly handles pipes,\n" \
- "redirects, job control, can be used as the shell for scripts, and has a\n" \
- "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
- "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
- "use ash or bash. If you just need a very simple and extremely small shell,\n" \
- "this will do the job."
+ "This command does not yet have proper documentation.\n\n" \
+ "Use lash just as you would use any other shell. It properly handles pipes,\n" \
+ "redirects, job control, can be used as the shell for scripts, and has a\n" \
+ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
+ "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
+ "use ash or bash. If you just need a very simple and extremely small shell,\n" \
+ "this will do the job."
#define last_trivial_usage \
- ""
+ ""
#define last_full_usage \
- "Shows listing of the last users that logged into the system"
+ "Show listing of the last users that logged into the system"
#define sha1sum_trivial_usage \
- "[OPTION] [FILEs...]" \
+ "[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
- "Options:\n" \
- "With no FILE, or when FILE is -, read standard input." \
- USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
- "\t-c\tcheck SHA1 sums against given list\n" \
- "\nThe following two options are useful only when verifying checksums:\n" \
- "\t-s\tdon't output anything, status code shows success\n" \
- "\t-w\twarn about improperly formatted SHA1 checksum lines")
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \
+ "With no FILE, or when FILE is -, read standard input." \
+ "\n\nOptions:\n" \
+ USE_FEATURE_MD5_SHA1_SUM_CHECK( \
+ " -c Check SHA1 sums against given list\n" \
+ "\nThe following two options are useful only when verifying checksums:\n" \
+ " -s Don't output anything, status code shows success\n" \
+ " -w Warn about improperly formatted SHA1 checksum lines")
#define sleep_trivial_usage \
USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
- SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds.") \
+ SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \
USE_FEATURE_FANCY_SLEEP( \
- "Pause for a time equal to the total of the args given, where each arg can\n" \
- "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
+ "Pause for a time equal to the total of the args given, where each arg can\n" \
+ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
#define sleep_example_usage \
- "$ sleep 2\n" \
- "[2 second delay results]\n" \
- USE_FEATURE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
- "[98528 second delay results]\n")
-
-#if ENABLE_FEATURE_SORT_BIG
-# define USAGE_SORT_BIG(a) a
-#else
-# define USAGE_SORT_BIG(a)
-#endif
+ "$ sleep 2\n" \
+ "[2 second delay results]\n" \
+ USE_FEATURE_FANCY_SLEEP( \
+ "$ sleep 1d 3h 22m 8s\n" \
+ "[98528 second delay results]\n")
#define sort_trivial_usage \
- "[-nru" USAGE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") "] [FILE]..."
+ "[-nru" \
+ USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \
+ "] [FILE]..."
#define sort_full_usage \
- "Sorts lines of text in the specified files\n\n" \
- "Options:\n" \
- USAGE_SORT_BIG( \
- "\t-b\tignore leading blanks\n" \
- "\t-c\tcheck whether input is sorted\n" \
- "\t-d\tdictionary order (blank or alphanumeric only)\n" \
- "\t-f\tignore case\n" \
- "\t-g\tgeneral numerical sort\n" \
- "\t-i\tignore unprintable characters\n" \
- "\t-k\tspecify sort key\n" \
- "\t-M\tsort month\n" \
- ) \
- "\t-n\tsort numbers\n" \
- USAGE_SORT_BIG( \
- "\t-o\toutput to file\n" \
- "\t-k\tsort by key\n" \
- "\t-t\tuse key separator other than whitespace\n" \
- ) \
- "\t-r\treverse sort order\n" \
- USAGE_SORT_BIG("\t-s\tstable (don't sort ties alphabetically)\n") \
- "\t-u\tsuppress duplicate lines" \
- USAGE_SORT_BIG("\n\t-z\tinput terminated by nulls, not newlines\n") \
- USAGE_SORT_BIG("\t-mST\tignored for GNU compatibility") \
- ""
+ "Sort lines of text in the specified files" \
+ "\n\nOptions:\n" \
+ USE_FEATURE_SORT_BIG( \
+ " -b Ignore leading blanks\n" \
+ " -c Check whether input is sorted\n" \
+ " -d Dictionary order (blank or alphanumeric only)\n" \
+ " -f Ignore case\n" \
+ " -g General numerical sort\n" \
+ " -i Ignore unprintable characters\n" \
+ " -k Specify sort key\n" \
+ " -M Sort month\n") \
+ " -n Sort numbers\n" \
+ USE_FEATURE_SORT_BIG( \
+ " -o Output to file\n" \
+ " -k Sort by key\n" \
+ " -t Use key separator other than whitespace\n") \
+ " -r Reverse sort order\n" \
+ USE_FEATURE_SORT_BIG( \
+ " -s Stable (don't sort ties alphabetically)\n") \
+ " -u Suppress duplicate lines" \
+ USE_FEATURE_SORT_BIG( \
+ "\n -z Input terminated by nulls, not newlines\n") \
+ USE_FEATURE_SORT_BIG( \
+ " -mST Ignored for GNU compatibility") \
+ ""
#define sort_example_usage \
- "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
- "a\n" \
- "b\n" \
- "c\n" \
- "d\n" \
- "e\n" \
- "f\n" \
- USAGE_SORT_BIG( \
+ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
+ "a\n" \
+ "b\n" \
+ "c\n" \
+ "d\n" \
+ "e\n" \
+ "f\n" \
+ USE_FEATURE_SORT_BIG( \
"$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
"d 2\n" \
"b 2\n" \
"c 3\n" \
) \
- ""
+ ""
#define start_stop_daemon_trivial_usage \
- "[OPTIONS] [--start|--stop] ... [-- arguments...]"
+ "[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
- "Program to start and stop services." \
- "\n\nOptions:" \
- "\n\t-S|--start\t\t\tstart" \
- "\n\t-K|--stop\t\t\tstop" \
- "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname" \
- "\n\t-b|--background\t\t\tforce process into background" \
- "\n\t-u|--user <username>|<uid>\tstop this user's processes" \
- "\n\t-x|--exec <executable>\t\tprogram to either start or check" \
- "\n\t-m|--make-pidfile\tcreate the -p file and enter pid in it" \
- "\n\t-n|--name <process-name>\tstop processes with this name" \
- "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file" \
- "\n\t-q|--quiet\t\t\tbe quiet" \
-USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n\t-o|--oknodo\t\t\texit status 0 if nothing done" \
- "\n\t-v|--verbose\t\t\tbe verbose" \
- "\n\t-N|--nicelevel <N>\t\tadd N to process's nice level" \
-) \
- "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)" \
- "\n\t-U|--chuid <username>|<uid>\tstart process with this name"
+ "Start and stop services" \
+ "\n\nOptions:" \
+ "\n -S|--start Start" \
+ "\n -K|--stop Stop" \
+ "\n -a|--startas <pathname> Starts process specified by pathname" \
+ "\n -b|--background Force process into background" \
+ "\n -u|--user <username>|<uid> Stop this user's processes" \
+ "\n -x|--exec <executable> Program to either start or check" \
+ "\n -m|--make-pidfile Create the -p file and enter pid in it" \
+ "\n -n|--name <process-name> Stop processes with this name" \
+ "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
+ "\n -q|--quiet Be quiet" \
+ USE_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o|--oknodo Exit status 0 if nothing done" \
+ "\n -v|--verbose Be verbose" \
+ "\n -N|--nicelevel <N> Add N to process's nice level" \
+ ) \
+ "\n -s|--signal <signal> Signal to send (default TERM)" \
+ "\n -U|--chuid <username>|<uid> Start process with this name"
#define stat_trivial_usage \
- "[OPTION] FILE..."
+ "[OPTION] FILE..."
#define stat_full_usage \
- "display file (default) or filesystem status.\n\n" \
- "Options:\n" \
- USE_FEATURE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \
- "\t-f\tdisplay filesystem status\n" \
- "\t-L,-l\tdereference links\n" \
- "\t-t\tdisplay info in terse form\n" \
+ "Display file (default) or filesystem status" \
+ "\n\nOptions:\n" \
USE_FEATURE_STAT_FORMAT( \
- "\nValid format sequences for files:\n" \
- " %a Access rights in octal\n" \
- " %A Access rights in human readable form\n" \
- " %b Number of blocks allocated (see %B)\n" \
- " %B The size in bytes of each block reported by %b\n" \
- " %d Device number in decimal\n" \
- " %D Device number in hex\n" \
- " %f Raw mode in hex\n" \
- " %F File type\n" \
- " %g Group ID of owner\n" \
- " %G Group name of owner\n" \
- " %h Number of hard links\n" \
- " %i Inode number\n" \
- " %n File name\n" \
- " %N Quoted file name with dereference if symbolic link\n" \
- " %o I/O block size\n" \
- " %s Total size, in bytes\n" \
- " %t Major device type in hex\n" \
- " %T Minor device type in hex\n" \
- " %u User ID of owner\n" \
- " %U User name of owner\n" \
- " %x Time of last access\n" \
- " %X Time of last access as seconds since Epoch\n" \
- " %y Time of last modification\n" \
- " %Y Time of last modification as seconds since Epoch\n" \
- " %z Time of last change\n" \
- " %Z Time of last change as seconds since Epoch\n" \
- "\nValid format sequences for file systems:\n" \
- " %a Free blocks available to non-superuser\n" \
- " %b Total data blocks in file system\n" \
- " %c Total file nodes in file system\n" \
- " %d Free file nodes in file system\n" \
- " %f Free blocks in file system\n" \
- " %i File System ID in hex\n" \
- " %l Maximum length of filenames\n" \
- " %n File name\n" \
- " %s Block size (for faster transfers)\n" \
- " %S Fundamental block size (for block counts)\n" \
- " %t Type in hex\n" \
- " %T Type in human readable form\n" \
+ " -c fmt Use the specified format\n") \
+ " -f Display filesystem status\n" \
+ " -L,-l Dereference links\n" \
+ " -t Display info in terse form" \
+ USE_FEATURE_STAT_FORMAT( \
+ "\n\nValid format sequences for files:\n" \
+ " %a Access rights in octal\n" \
+ " %A Access rights in human readable form\n" \
+ " %b Number of blocks allocated (see %B)\n" \
+ " %B The size in bytes of each block reported by %b\n" \
+ " %d Device number in decimal\n" \
+ " %D Device number in hex\n" \
+ " %f Raw mode in hex\n" \
+ " %F File type\n" \
+ " %g Group ID of owner\n" \
+ " %G Group name of owner\n" \
+ " %h Number of hard links\n" \
+ " %i Inode number\n" \
+ " %n File name\n" \
+ " %N Quoted file name with dereference if symbolic link\n" \
+ " %o I/O block size\n" \
+ " %s Total size, in bytes\n" \
+ " %t Major device type in hex\n" \
+ " %T Minor device type in hex\n" \
+ " %u User ID of owner\n" \
+ " %U User name of owner\n" \
+ " %x Time of last access\n" \
+ " %X Time of last access as seconds since Epoch\n" \
+ " %y Time of last modification\n" \
+ " %Y Time of last modification as seconds since Epoch\n" \
+ " %z Time of last change\n" \
+ " %Z Time of last change as seconds since Epoch\n" \
+ "\nValid format sequences for file systems:\n" \
+ " %a Free blocks available to non-superuser\n" \
+ " %b Total data blocks in file system\n" \
+ " %c Total file nodes in file system\n" \
+ " %d Free file nodes in file system\n" \
+ " %f Free blocks in file system\n" \
+ " %i File System ID in hex\n" \
+ " %l Maximum length of filenames\n" \
+ " %n File name\n" \
+ " %s Block size (for faster transfers)\n" \
+ " %S Fundamental block size (for block counts)\n" \
+ " %t Type in hex\n" \
+ " %T Type in human readable form" \
)
#define strings_trivial_usage \
- "[-afo] [-n length] [file ... ]"
+ "[-afo] [-n length] [file ... ]"
#define strings_full_usage \
- "Display printable strings in a binary file." \
- "\n\nOptions:" \
- "\n\t-a\tScan the whole files (this is the default)." \
- "\n\t-f\tPrecede each string with the name of the file where it was found." \
- "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
- "\n\t-o\tEach string is preceded by its decimal offset in the file"
+ "Display printable strings in a binary file" \
+ "\n\nOptions:" \
+ "\n -a Scan the whole files (this is the default)" \
+ "\n -f Precede each string with the name of the file where it was found" \
+ "\n -n N Specifies that at least N characters forms a sequence (default 4)" \
+ "\n -o Each string is preceded by its decimal offset in the file"
#define stty_trivial_usage \
- "[-a|g] [-F DEVICE] [SETTING]..."
+ "[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
- "Without arguments, prints baud rate, line discipline," \
- "\nand deviations from stty sane." \
- "\n\nOptions:" \
- "\n\t-F DEVICE\topen device instead of stdin" \
- "\n\t-a\t\tprint all current settings in human-readable form" \
- "\n\t-g\t\tprint in stty-readable form" \
- "\n\t[SETTING]\tsee manpage"
+ "Without arguments, prints baud rate, line discipline,\n" \
+ "and deviations from stty sane" \
+ "\n\nOptions:" \
+ "\n -F DEVICE Open device instead of stdin" \
+ "\n -a Print all current settings in human-readable form" \
+ "\n -g Print in stty-readable form" \
+ "\n [SETTING] See manpage"
#define su_trivial_usage \
- "[OPTION]... [-] [username]"
+ "[OPTION]... [-] [username]"
#define su_full_usage \
- "Change user id or become root.\n" \
- "Options:\n" \
- "\t-p, -m\tPreserve environment" \
- "\n\t-c\tCommand to pass to 'sh -c'" \
- "\n\t-s\tShell to use instead of default shell"
+ "Change user id or become root" \
+ "\n\nOptions:" \
+ "\n -p, -m Preserve environment" \
+ "\n -c Command to pass to 'sh -c'" \
+ "\n -s Shell to use instead of default shell"
#define sulogin_trivial_usage \
- "[OPTION]... [tty-device]"
+ "[OPTION]... [tty-device]"
#define sulogin_full_usage \
- "Single user login\n" \
- "Options:\n" \
- "\t-t\tTimeout"
+ "Single user login" \
+ "\n\nOptions:" \
+ "\n -t Timeout"
#define sum_trivial_usage \
- "[rs] [files...]"
+ "[rs] [files...]"
#define sum_full_usage \
- "checksum and count the blocks in a file\n\n" \
- "Options:\n" \
- "\t-r\tuse BSD sum algorithm (1K blocks)\n" \
- "\t-s\tuse System V sum algorithm (512byte blocks)"
+ "Checksum and count the blocks in a file" \
+ "\n\nOptions:\n" \
+ " -r Use BSD sum algorithm (1K blocks)\n" \
+ " -s Use System V sum algorithm (512byte blocks)"
+
+#define sv_trivial_usage \
+ "[-v] [-w sec] command service..."
+#define sv_full_usage \
+ "Report the current status and control the state of services " \
+ "monitored by the runsv supervisor"
+
+#define svlogd_trivial_usage \
+ "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
+#define svlogd_full_usage \
+ "Continuously read log data from standard input, optionally " \
+ "filter log messages, and write the data to one or more automatically " \
+ "rotated logs"
#define swapoff_trivial_usage \
- "[-a] [DEVICE]"
+ "[-a] [DEVICE]"
#define swapoff_full_usage \
- "Stop swapping virtual memory pages on DEVICE.\n\n" \
- "Options:\n" \
- "\t-a\tStop swapping on all swap devices"
+ "Stop swapping virtual memory pages on DEVICE" \
+ "\n\nOptions:\n" \
+ " -a Stop swapping on all swap devices"
#define swapon_trivial_usage \
- "[-a] [DEVICE]"
+ "[-a] [DEVICE]"
#define swapon_full_usage \
- "Start swapping virtual memory pages on DEVICE.\n\n" \
- "Options:\n" \
- "\t-a\tStart swapping on all swap devices"
+ "Start swapping virtual memory pages on DEVICE" \
+ "\n\nOptions:\n" \
+ " -a Start swapping on all swap devices"
#define switch_root_trivial_usage \
- "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
+ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
#define switch_root_full_usage \
- "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
- "and exec NEW_INIT.\n\n" \
- "Options:\n" \
- "\t-c\tRedirect console to device on new root"
+ "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
+ "and exec NEW_INIT" \
+ "\n\nOptions:\n" \
+ " -c Redirect console to device on new root"
#define sync_trivial_usage \
- ""
+ ""
#define sync_full_usage \
- "Write all buffered filesystem blocks to disk."
+ "Write all buffered filesystem blocks to disk"
#define sysctl_trivial_usage \
- "[OPTIONS]... [VALUE]..."
+ "[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
- "configure kernel parameters at runtime\n\n" \
- "Options:\n" \
- "\t-n\tUse this option to disable printing of the key name when printing values\n" \
- "\t-w\tUse this option when you want to change a sysctl setting\n" \
- "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
- "\t-a\tDisplay all values currently available\n" \
- "\t-A\tDisplay all values currently available in table form"
+ "Configure kernel parameters at runtime" \
+ "\n\nOptions:\n" \
+ " -n Use this option to disable printing of the key name when printing values\n" \
+ " -w Use this option when you want to change a sysctl setting\n" \
+ " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
+ " -a Display all values currently available\n" \
+ " -A Display all values currently available in table form"
#define sysctl_example_usage \
- "sysctl [-n] variable ...\n" \
- "sysctl [-n] -w variable=value ...\n" \
- "sysctl [-n] -a\n" \
- "sysctl [-n] -p <file>\t(default /etc/sysctl.conf)\n" \
- "sysctl [-n] -A\n"
+ "sysctl [-n] variable ...\n" \
+ "sysctl [-n] -w variable=value ...\n" \
+ "sysctl [-n] -a\n" \
+ "sysctl [-n] -p <file> (default /etc/sysctl.conf)\n" \
+ "sysctl [-n] -A\n"
#define syslogd_trivial_usage \
- "[OPTION]..."
+ "[OPTION]..."
#define syslogd_full_usage \
- "Linux system and kernel logging utility.\n" \
- "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
- "Options:\n" \
- "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
- "\t-n\t\tRun as a foreground process\n" \
- "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \
- "\t-l n\tSets the local log level of messages to n\n" \
- "\t-S\t\tMake logging output smaller" \
+ "System logging utility.\n" \
+ "Note that this version of syslogd ignores /etc/syslog.conf." \
+ "\n\nOptions:" \
+ "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
+ "\n -n Run as foreground process" \
+ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
+ "\n -l n Sets the local log level of messages to n" \
+ "\n -S Make logging output smaller" \
USE_FEATURE_ROTATE_LOGFILE( \
- "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
- "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
+ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
+ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
USE_FEATURE_REMOTE_LOG( \
- "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
- "\t-L\t\tLog locally and via network logging (default is network only)") \
+ "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
+ "\n -L Log locally and via network logging (default is network only)") \
USE_FEATURE_IPC_SYSLOG( \
- "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
+ "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
+ /* NB: -Csize shouldn't have space (because size is optional) */
#define syslogd_example_usage \
- "$ syslogd -R masterlog:514\n" \
- "$ syslogd -R 192.168.1.1:601\n"
+ "$ syslogd -R masterlog:514\n" \
+ "$ syslogd -R 192.168.1.1:601\n"
#define tail_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define tail_full_usage \
- "Print last 10 lines of each FILE to standard output.\n" \
- "With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
- "Options:\n" \
- USE_FEATURE_FANCY_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
- "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
- "\t-f\t\toutput data as the file grows" \
- USE_FEATURE_FANCY_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
- "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
- "\t-v\t\talways output headers giving file names\n\n" \
- "If the first character of N (bytes or lines) is a '+', output begins with\n" \
- "the Nth item from the start of each file, otherwise, print the last N items\n" \
- "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
+ "Print last 10 lines of each FILE to standard output.\n" \
+ "With more than one FILE, precede each with a header giving the\n" \
+ "file name. With no FILE, or when FILE is -, read standard input." \
+ "\n\nOptions:" \
+ USE_FEATURE_FANCY_TAIL( \
+ "\n -c N[kbm] Output the last N bytes") \
+ "\n -n N[kbm] Print last N lines instead of last 10" \
+ "\n -f Output data as the file grows" \
+ USE_FEATURE_FANCY_TAIL( \
+ "\n -q Never output headers giving file names" \
+ "\n -s SEC Wait SEC seconds between reads with -f" \
+ "\n -v Always output headers giving file names" \
+ "\n\n" \
+ "If the first character of N (bytes or lines) is a '+', output begins with\n" \
+ "the Nth item from the start of each file, otherwise, print the last N items\n" \
+ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
#define tail_example_usage \
- "$ tail -n 1 /etc/resolv.conf\n" \
- "nameserver 10.0.0.1\n"
+ "$ tail -n 1 /etc/resolv.conf\n" \
+ "nameserver 10.0.0.1\n"
#define tar_trivial_usage \
- "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
+ "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
- USE_FEATURE_TAR_FROM("[-X FILE]") \
- "[-f TARFILE] [-C DIR] [FILE(s)] ..."
+ USE_FEATURE_TAR_FROM("[-X FILE] ") \
+ "[-f TARFILE] [-C DIR] [FILE(s)] ..."
#define tar_full_usage \
- "Create, extract, or list files from a tar file.\n\n" \
- "Options:\n" \
- USE_FEATURE_TAR_CREATE("\tc\t\tcreate\n") \
- "\tx\t\textract\n" \
- "\tt\t\tlist\n" \
- "\nArchive format selection:\n" \
- USE_FEATURE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
- USE_FEATURE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
- USE_FEATURE_TAR_LZMA("\ta\t\tFilter the archive through lzma\n") \
- USE_FEATURE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
- "\nFile selection:\n" \
- "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
- "\tO\t\textract to stdout\n" \
+ "Create, extract, or list files from a tar file" \
+ "\n\nOptions:\n" \
+ USE_FEATURE_TAR_CREATE( \
+ " c Create\n") \
+ " x Extract\n" \
+ " t List\n" \
+ "\nArchive format selection:\n" \
+ USE_FEATURE_TAR_GZIP( \
+ " z Filter the archive through gzip\n") \
+ USE_FEATURE_TAR_BZIP2( \
+ " j Filter the archive through bzip2\n") \
+ USE_FEATURE_TAR_LZMA( \
+ " a Filter the archive through lzma\n") \
+ USE_FEATURE_TAR_COMPRESS( \
+ " Z Filter the archive through compress\n") \
+ "\nFile selection:\n" \
+ " f Name of TARFILE or \"-\" for stdin\n" \
+ " O Extract to stdout\n" \
USE_FEATURE_TAR_FROM( \
- "\texclude\t\tfile to exclude\n" \
- "\tX\t\tfile with names to exclude\n" \
- ) \
- "\tC\t\tchange to directory DIR before operation\n" \
- "\tv\t\tverbosely list files processed"
+ " exclude File to exclude\n" \
+ " X File with names to exclude\n") \
+ " C Change to directory DIR before operation\n" \
+ " v Verbosely list files processed"
#define tar_example_usage \
- "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
- "$ tar -cf /tmp/tarball.tar /usr/local\n"
+ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
+ "$ tar -cf /tmp/tarball.tar /usr/local\n"
+
+#define taskset_trivial_usage \
+ "[OPTIONS] [mask] [pid | command [arg]...]"
+#define taskset_full_usage \
+ "Set or get CPU affinity" \
+ "\n\nOptions:\n" \
+ " -p Operate on an existing PID"
+#define taskset_example_usage \
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n" \
+ "pid 1's current affinity mask: 3\n"
#define tee_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define tee_full_usage \
- "Copy standard input to each FILE, and also to standard output.\n\n" \
- "Options:\n" \
- "\t-a\tappend to the given FILEs, do not overwrite\n" \
- "\t-i\tignore interrupt signals (SIGINT)"
+ "Copy standard input to each FILE, and also to standard output" \
+ "\n\nOptions:\n" \
+ " -a Append to the given FILEs, do not overwrite\n" \
+ " -i Ignore interrupt signals (SIGINT)"
#define tee_example_usage \
- "$ echo \"Hello\" | tee /tmp/foo\n" \
- "$ cat /tmp/foo\n" \
- "Hello\n"
+ "$ echo \"Hello\" | tee /tmp/foo\n" \
+ "$ cat /tmp/foo\n" \
+ "Hello\n"
#ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
#define telnet_trivial_usage \
- "[-a] [-l USER] HOST [PORT]"
+ "[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage \
- "Telnet is used to establish interactive communication with another\n" \
- "computer over a network using the TELNET protocol.\n\n" \
- "Options:\n" \
- "\t-a\t\tAttempt an automatic login with the USER variable\n" \
- "\t-l USER\t\tAttempt an automatic login with the USER argument\n" \
- "\tHOST\t\tThe official name, alias or the IP address of the\n" \
- "\t\t\tremote host.\n" \
- "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
- "\t\t\tspecified, the default telnet (23) port is used."
+ "Connect to remote telnet server" \
+ "\n\nOptions:\n" \
+ " -a Attempt an automatic login with the USER variable\n" \
+ " -l USER Attempt an automatic login with the USER argument\n" \
+ " HOST The official name, alias or the IP address of the\n" \
+ " remote host\n" \
+ " PORT The remote port number to connect to. If it is not\n" \
+ " specified, the default telnet (23) port is used."
#else
#define telnet_trivial_usage \
- "HOST [PORT]"
+ "HOST [PORT]"
#define telnet_full_usage \
- "Telnet is used to establish interactive communication with another\n" \
- "computer over a network using the TELNET protocol."
+ "Connect to remote telnet server"
#endif
-#ifdef CONFIG_FEATURE_TELNETD_INETD
#define telnetd_trivial_usage \
- "(inetd mode) [OPTION]"
+ "[OPTION]"
#define telnetd_full_usage \
- "Telnetd uses incoming TELNET connections via inetd.\n" \
- "Options:\n" \
- "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
- "\t-f issue_file\tDisplay issue_file instead of /etc/issue"
-#else
-#define telnetd_trivial_usage \
- "[OPTION]"
-#define telnetd_full_usage \
- "Telnetd listens for incoming TELNET connections on PORT.\n" \
- "Options:\n" \
- "\t-p PORT\tlisten for connections on PORT (default 23)\n" \
- "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
- "\t-f issue_file\tDisplay issue_file instead of /etc/issue"
-#endif
+ "Handle incoming telnet connections" \
+ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
+ "\n\nOptions:" \
+ "\n -l LOGIN Exec LOGIN on connect" \
+ "\n -f issue_file Display issue_file instead of /etc/issue" \
+ USE_FEATURE_TELNETD_STANDALONE( \
+ "\n -p PORT Port to listen to" \
+ "\n -b ADDR Address to bind to" \
+ "\n -F Stay in foreground" \
+ "\n -i Run as inetd subservice" \
+ )
#define test_trivial_usage \
- "EXPRESSION\n or [ EXPRESSION ]"
+ "EXPRESSION\n or [ EXPRESSION ]"
#define test_full_usage \
- "Checks file types and compares values returning an exit\n" \
- "code determined by the value of EXPRESSION."
+ "Check file types and compares values returning an exit code\n" \
+ "determined by the value of EXPRESSION"
#define test_example_usage \
- "$ test 1 -eq 2\n" \
- "$ echo $?\n" \
- "1\n" \
- "$ test 1 -eq 1\n" \
- "$ echo $?\n" \
- "0\n" \
- "$ [ -d /etc ]\n" \
- "$ echo $?\n" \
- "0\n" \
- "$ [ -d /junk ]\n" \
- "$ echo $?\n" \
- "1\n"
+ "$ test 1 -eq 2\n" \
+ "$ echo $?\n" \
+ "1\n" \
+ "$ test 1 -eq 1\n" \
+ "$ echo $?\n" \
+ "0\n" \
+ "$ [ -d /etc ]\n" \
+ "$ echo $?\n" \
+ "0\n" \
+ "$ [ -d /junk ]\n" \
+ "$ echo $?\n" \
+ "1\n"
#define tftp_trivial_usage \
- "[OPTION]... HOST [PORT]"
+ "[OPTION]... HOST [PORT]"
#define tftp_full_usage \
- "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
- "Options:\n" \
- "\t-l FILE\tLocal FILE\n" \
- "\t-r FILE\tRemote FILE" \
+ "Transfer a file from/to tftp server using \"octet\" mode" \
+ "\n\nOptions:" \
+ "\n -l FILE Local FILE" \
+ "\n -r FILE Remote FILE" \
USE_FEATURE_TFTP_GET( \
- "\n\t-g\tGet file" \
+ "\n -g Get file" \
) \
USE_FEATURE_TFTP_PUT( \
- "\n\t-p\tPut file" \
+ "\n -p Put file" \
) \
USE_FEATURE_TFTP_BLOCKSIZE( \
- "\n\t-b SIZE\tTransfer blocks of SIZE octets" \
+ "\n -b SIZE Transfer blocks of SIZE octets" \
)
#define time_trivial_usage \
- "[OPTION]... COMMAND [ARGS...]"
+ "[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
- "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
- "COMMAND's resource usage information is displayed\n\n" \
- "Options:\n" \
- "\t-v\tDisplays verbose resource usage information"
+ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
+ "COMMAND's resource usage information is displayed." \
+ "\n\nOptions:\n" \
+ " -v Display verbose resource usage information"
#define top_trivial_usage \
- "[-b] [-n count] [-d seconds]"
+ "[-b] [-n count] [-d seconds]"
#define top_full_usage \
- "top provides a view of process activity in real time.\n" \
- "It reads the status of all processes from /proc each <seconds>\n" \
- "and shows the status for however many processes will fit on the screen."
+ "Provide a view of process activity in real time.\n" \
+ "Read the status of all processes from /proc each <seconds>\n" \
+ "and show the status for however many processes will fit on the screen."
#define touch_trivial_usage \
- "[-c] FILE [FILE ...]"
+ "[-c] FILE [FILE ...]"
#define touch_full_usage \
- "Update the last-modified date on the given FILE[s].\n\n" \
- "Options:\n" \
- "\t-c\tDo not create any files"
+ "Update the last-modified date on the given FILE[s]" \
+ "\n\nOptions:\n" \
+ " -c Do not create any files"
#define touch_example_usage \
- "$ ls -l /tmp/foo\n" \
- "/bin/ls: /tmp/foo: No such file or directory\n" \
- "$ touch /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
+ "$ ls -l /tmp/foo\n" \
+ "/bin/ls: /tmp/foo: No such file or directory\n" \
+ "$ touch /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
#define tr_trivial_usage \
- "[-cds] STRING1 [STRING2]"
+ "[-cds] STRING1 [STRING2]"
#define tr_full_usage \
- "Translate, squeeze, and/or delete characters from\n" \
- "standard input, writing to standard output.\n\n" \
- "Options:\n" \
- "\t-c\ttake complement of STRING1\n" \
- "\t-d\tdelete input characters coded STRING1\n" \
- "\t-s\tsqueeze multiple output characters of STRING2 into one character"
+ "Translate, squeeze, and/or delete characters from\n" \
+ "standard input, writing to standard output" \
+ "\n\nOptions:\n" \
+ " -c Take complement of STRING1\n" \
+ " -d Delete input characters coded STRING1\n" \
+ " -s Squeeze multiple output characters of STRING2 into one character"
#define tr_example_usage \
- "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
- "hello world\n"
+ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
+ "hello world\n"
#define traceroute_trivial_usage \
- "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
- "\t[-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
- "\t[-z pausemsecs] host [data size]"
+ "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
+ " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
+ " [-z pausemsecs] host [data size]"
#define traceroute_full_usage \
- "trace the route ip packets follow going to \"host\"\n" \
- "Options:\n" \
- "\t-F\tSet the don't fragment bit\n" \
- "\t-I\tUse ICMP ECHO instead of UDP datagrams\n" \
- "\t-l\tDisplay the ttl value of the returned packet\n" \
- "\t-d\tSet SO_DEBUG options to socket\n" \
- "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
- "\t-r\tBypass the normal routing tables and send directly to a host\n" \
- "\t-v\tVerbose output\n" \
- "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
- "\t-p port#\tSet the base UDP port number used in probes\n" \
- "\t\t(default is 33434)\n" \
- "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
- "\t\t(default is 3)\n" \
- "\t-s src_addr\tUse the following IP address as the source address\n" \
- "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
- "\t\t(default 0)\n" \
- "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
- "\t\t(default 3 sec)\n" \
- "\t-g\tSpecify a loose source route gateway (8 maximum)"
+ "Trace the route ip packets follow going to \"host\"" \
+ "\n\nOptions:\n" \
+ " -F Set the don't fragment bit\n" \
+ " -I Use ICMP ECHO instead of UDP datagrams\n" \
+ " -l Display the ttl value of the returned packet\n" \
+ " -d Set SO_DEBUG options to socket\n" \
+ " -n Print hop addresses numerically rather than symbolically\n" \
+ " -r Bypass the normal routing tables and send directly to a host\n" \
+ " -v Verbose output\n" \
+ " -m max_ttl Set the max time-to-live (max number of hops)\n" \
+ " -p port# Set the base UDP port number used in probes\n" \
+ " (default is 33434)\n" \
+ " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \
+ " (default is 3)\n" \
+ " -s src_addr Use the following IP address as the source address\n" \
+ " -t tos Set the type-of-service in probe packets to the following value\n" \
+ " (default 0)\n" \
+ " -w wait Set the time (in seconds) to wait for a response to a probe\n" \
+ " (default 3 sec)\n" \
+ " -g Specify a loose source route gateway (8 maximum)"
#define true_trivial_usage \
- ""
+ ""
#define true_full_usage \
- "Return an exit code of TRUE (0)."
+ "Return an exit code of TRUE (0)"
#define true_example_usage \
- "$ true\n" \
- "$ echo $?\n" \
- "0\n"
+ "$ true\n" \
+ "$ echo $?\n" \
+ "0\n"
#define tty_trivial_usage \
- ""
+ ""
#define tty_full_usage \
- "Print the file name of the terminal connected to standard input.\n\n" \
- "Options:\n" \
- "\t-s\tprint nothing, only return an exit status"
+ "Print the file name of the terminal connected to standard input" \
+ "\n\nOptions:\n" \
+ " -s Print nothing, only return an exit status"
#define tty_example_usage \
- "$ tty\n" \
- "/dev/tty2\n"
+ "$ tty\n" \
+ "/dev/tty2\n"
#define tune2fs_trivial_usage \
- "[-c max-mounts-count] [-e errors-behavior] [-g group] " \
- "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
- "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \
- "[-r reserved-blocks-count] [-u user] [-C mount-count] " \
- "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
- "[-T last-check-time] [-U UUID] device"
+ "[-c max-mounts-count] [-e errors-behavior] [-g group] " \
+ "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
+ "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \
+ "[-r reserved-blocks-count] [-u user] [-C mount-count] " \
+ "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
+ "[-T last-check-time] [-U UUID] device"
#define tune2fs_full_usage \
- "Adjust filesystem options on ext[23] filesystems."
+ "Adjust filesystem options on ext[23] filesystems"
#define udhcpc_trivial_usage \
- "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
+ "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
#define udhcpc_full_usage \
- "\t-c,\t--clientid=CLIENTID\tSet client identifier\n" \
- "\t-C,\t--clientid-none\tSuppress default client identifier\n" \
- "\t-V,\t--vendorclass=CLASSID\tSet vendor class identifier\n" \
- "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
- "\t-h,\t \tAlias for -H\n" \
- "\t-f,\t--foreground\tDo not fork after getting lease\n" \
- "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated\n" \
- "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
- "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated\n" \
- "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
- "\t-q,\t--quit\tQuit after obtaining lease\n" \
- "\t-R,\t--release\tRelease IP on quit\n" \
- "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
- "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
- "\t-t,\t--retries=NUM\tSend up to NUM request packets\n"\
- "\t-v,\t--version\tDisplay version"
+ " -V,--vendorclass=CLASSID Set vendor class identifier\n" \
+ " -i,--interface=INTERFACE Interface to use (default: eth0)\n" \
+ " -H,-h,--hostname=HOSTNAME Client hostname\n" \
+ " -c,--clientid=CLIENTID Set client identifier\n" \
+ " -C,--clientid-none Suppress default client identifier\n" \
+ " -p,--pidfile=file Store process ID of daemon in file\n" \
+ " -r,--request=IP IP address to request (default: none)\n" \
+ " -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
+ " -t,--retries=NUM Send up to NUM request packets\n"\
+ " -f,--foreground Do not fork after getting lease\n" \
+ " -b,--background Fork to background if lease cannot be immediately negotiated\n" \
+ " -n,--now Exit with failure if lease cannot be immediately negotiated\n" \
+ " -q,--quit Quit after obtaining lease\n" \
+ " -R,--release Release IP on quit\n" \
+ " -v,--version Display version" \
#define udhcpd_trivial_usage \
- "[configfile]\n" \
+ "[configfile]\n" \
#define udhcpd_full_usage \
- ""
+ ""
#define umount_trivial_usage \
- "[flags] FILESYSTEM|DIRECTORY"
+ "[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
- "Unmount file systems\n" \
- "\nFlags:\n" "\t-a\tUnmount all file systems" \
- USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
- "\n\t-r\tTry to remount devices as read-only if mount is busy" \
- "\n\t-l\tLazy umount (detach filesystem)" \
- "\n\t-f\tForce umount (i.e., unreachable NFS server)" \
- USE_FEATURE_MOUNT_LOOP("\n\t-D\tDo not free loop device (if a loop device has been used)")
+ "Unmount file systems" \
+ "\n\nOptions:\n" \
+ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ USE_FEATURE_MTAB_SUPPORT( \
+ "\n -n Don't erase /etc/mtab entries") \
+ "\n -r Try to remount devices as read-only if mount is busy" \
+ "\n -l Lazy umount (detach filesystem)" \
+ "\n -f Force umount (i.e., unreachable NFS server)" \
+ USE_FEATURE_MOUNT_LOOP( \
+ "\n -D Do not free loop device (if a loop device has been used)")
#define umount_example_usage \
- "$ umount /dev/hdc1\n"
+ "$ umount /dev/hdc1\n"
#define uname_trivial_usage \
- "[OPTION]..."
+ "[OPTION]..."
#define uname_full_usage \
- "Print certain system information. With no OPTION, same as -s.\n\n" \
- "Options:\n" \
- "\t-a\tprint all information\n" \
- "\t-m\tthe machine (hardware) type\n" \
- "\t-n\tprint the machine's network node hostname\n" \
- "\t-r\tprint the operating system release\n" \
- "\t-s\tprint the operating system name\n" \
- "\t-p\tprint the host processor type\n" \
- "\t-v\tprint the operating system version"
+ "Print certain system information. With no OPTION, same as -s." \
+ "\n\nOptions:\n" \
+ " -a Print all information\n" \
+ " -m The machine (hardware) type\n" \
+ " -n Print the machine's network node hostname\n" \
+ " -r Print the operating system release\n" \
+ " -s Print the operating system name\n" \
+ " -p Print the host processor type\n" \
+ " -v Print the operating system version"
#define uname_example_usage \
- "$ uname -a\n" \
- "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
+ "$ uname -a\n" \
+ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
- "[-c] [-f] [ name ... ]"
+ "[-c] [-f] [ name ... ]"
#define uncompress_full_usage \
- "Uncompress .Z file[s]\n" \
- "Options:\n" \
- "\t-c\textract to stdout\n" \
- "\t-f\tforce overwrite an existing file"
+ "Uncompress .Z file[s]" \
+ "\n\nOptions:\n" \
+ " -c Extract to stdout\n" \
+ " -f Force overwrite an existing file"
#define uniq_trivial_usage \
- "[-fscdu]... [INPUT [OUTPUT]]"
+ "[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
- "Discard all but one of successive identical lines from INPUT\n" \
- "(or standard input), writing to OUTPUT (or standard output).\n\n" \
- "Options:\n" \
- "\t-c\tprefix lines by the number of occurrences\n" \
- "\t-d\tonly print duplicate lines\n" \
- "\t-u\tonly print unique lines\n" \
- "\t-f N\tskip the first N fields\n" \
- "\t-s N\tskip the first N chars (after any skipped fields)"
+ "Discard all but one of successive identical lines from INPUT\n" \
+ "(or standard input), writing to OUTPUT (or standard output)" \
+ "\n\nOptions:\n" \
+ " -c Prefix lines by the number of occurrences\n" \
+ " -d Only print duplicate lines\n" \
+ " -u Only print unique lines\n" \
+ " -f N Skip the first N fields\n" \
+ " -s N Skip the first N chars (after any skipped fields)"
#define uniq_example_usage \
- "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
- "a\n" \
- "b\n" \
- "c\n"
+ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
+ "a\n" \
+ "b\n" \
+ "c\n"
#define unix2dos_trivial_usage \
- "[option] [FILE]"
+ "[option] [FILE]"
#define unix2dos_full_usage \
- "Converts FILE from unix format to dos format. When no option\n" \
- "is given, the input is converted to the opposite output format.\n" \
- "When no file is given, uses stdin for input and stdout for output.\n" \
- "Options:\n" \
- "\t-u\toutput will be in UNIX format\n" \
- "\t-d\toutput will be in DOS format"
+ "Convert FILE from unix format to dos format. When no option\n" \
+ "is given, the input is converted to the opposite output format.\n" \
+ "When no file is given, use stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define unzip_trivial_usage \
- "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
+ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
- "Extracts files from ZIP archives.\n\n" \
- "Options:\n" \
- "\t-l\tlist archive contents (short form)\n" \
- "\t-n\tnever overwrite existing files (default)\n" \
- "\t-o\toverwrite files without prompting\n" \
- "\t-p\tsend output to stdout\n" \
- "\t-q\tbe quiet\n" \
- "\t-x\texclude these files\n" \
- "\t-d\textract files into this directory"
+ "Extract files from ZIP archives" \
+ "\n\nOptions:\n" \
+ " -l List archive contents (short form)\n" \
+ " -n Never overwrite existing files (default)\n" \
+ " -o Overwrite files without prompting\n" \
+ " -p Send output to stdout\n" \
+ " -q Be quiet\n" \
+ " -x Exclude these files\n" \
+ " -d Extract files into this directory"
#define uptime_trivial_usage \
- ""
+ ""
#define uptime_full_usage \
- "Display the time since the last boot."
+ "Display the time since the last boot"
#define uptime_example_usage \
- "$ uptime\n" \
- " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
+ "$ uptime\n" \
+ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
#define usleep_trivial_usage \
- "N"
+ "N"
#define usleep_full_usage \
- "Pause for N microseconds."
+ "Pause for N microseconds"
#define usleep_example_usage \
- "$ usleep 1000000\n" \
- "[pauses for 1 second]\n"
+ "$ usleep 1000000\n" \
+ "[pauses for 1 second]\n"
#define uudecode_trivial_usage \
- "[FILE]..."
+ "[FILE]..."
#define uudecode_full_usage \
- "Uudecode a file that is uuencoded.\n\n" \
- "Options:\n" \
- "\t-o FILE\tdirect output to FILE"
+ "Uudecode a file" \
+ "\n\nOptions:\n" \
+ " -o FILE Direct output to FILE"
#define uudecode_example_usage \
- "$ uudecode -o busybox busybox.uu\n" \
- "$ ls -l busybox\n" \
- "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
+ "$ uudecode -o busybox busybox.uu\n" \
+ "$ ls -l busybox\n" \
+ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
#define uuencode_trivial_usage \
- "[OPTION] [INFILE] REMOTEFILE"
+ "[OPTION] [INFILE] REMOTEFILE"
#define uuencode_full_usage \
- "Uuencode a file.\n\n" \
- "Options:\n" \
- "\t-m\tuse base64 encoding per RFC1521"
+ "Uuencode a file" \
+ "\n\nOptions:\n" \
+ " -m Use base64 encoding per RFC1521"
#define uuencode_example_usage \
- "$ uuencode busybox busybox\n" \
- "begin 755 busybox\n" \
- "<encoded file snipped>\n" \
- "$ uudecode busybox busybox > busybox.uu\n" \
- "$\n"
+ "$ uuencode busybox busybox\n" \
+ "begin 755 busybox\n" \
+ "<encoded file snipped>\n" \
+ "$ uudecode busybox busybox > busybox.uu\n" \
+ "$\n"
#define vconfig_trivial_usage \
- "COMMAND [OPTIONS] ..."
+ "COMMAND [OPTIONS] ..."
#define vconfig_full_usage \
- "vconfig lets you create and remove virtual ethernet devices.\n\n" \
- "Options:\n" \
- "\tadd [interface-name] [vlan_id]\n" \
- "\trem [vlan-name]\n" \
- "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
- "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- "\tset_name_type [name-type]"
+ "Create and remove virtual ethernet devices" \
+ "\n\nOptions:\n" \
+ " add [interface-name] [vlan_id]\n" \
+ " rem [vlan-name]\n" \
+ " set_flag [interface-name] [flag-num] [0 | 1]\n" \
+ " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ " set_name_type [name-type]"
#define vi_trivial_usage \
- "[OPTION] [FILE]..."
+ "[OPTION] [FILE]..."
#define vi_full_usage \
- "edit FILE.\n\n" \
- "Options:\n" \
- "\t-R\tRead-only- do not write to the file"
+ "Edit FILE" \
+ "\n\nOptions:\n" \
+ " -R Read-only - do not write to the file"
#define vlock_trivial_usage \
- "[OPTIONS]"
+ "[OPTIONS]"
#define vlock_full_usage \
- "Lock a virtual terminal. A password is required to unlock\n" \
- "Options:\n" \
- "\t-a\tLock all VTs"
+ "Lock a virtual terminal. A password is required to unlock." \
+ "\n\nOptions:\n" \
+ " -a Lock all VTs"
#define watch_trivial_usage \
- "[-n <seconds>] [-t] COMMAND..."
+ "[-n <seconds>] [-t] COMMAND..."
#define watch_full_usage \
- "Executes a program periodically\n\n" \
- "Options:\n" \
- "\t-n\tLoop period in seconds - default is 2\n"
- "\t-t\tDon't print header"
+ "Execute a program periodically" \
+ "\n\nOptions:\n" \
+ " -n Loop period in seconds - default is 2\n" \
+ " -t Don't print header"
#define watch_example_usage \
- "$ watch date\n" \
- "Mon Dec 17 10:31:40 GMT 2000\n" \
- "Mon Dec 17 10:31:42 GMT 2000\n" \
- "Mon Dec 17 10:31:44 GMT 2000"
+ "$ watch date\n" \
+ "Mon Dec 17 10:31:40 GMT 2000\n" \
+ "Mon Dec 17 10:31:42 GMT 2000\n" \
+ "Mon Dec 17 10:31:44 GMT 2000"
#define watchdog_trivial_usage \
- "[-t <seconds>] [-F] DEV"
+ "[-t <seconds>] [-F] DEV"
#define watchdog_full_usage \
- "Periodically write to watchdog device DEV.\n" \
- "Options:\n" \
- "\t-t\tTimer period in seconds - default is 30\n" \
- "\t-F\tStay in the foreground and don't fork"
+ "Periodically write to watchdog device DEV" \
+ "\n\nOptions:\n" \
+ " -t Timer period in seconds - default is 30\n" \
+ " -F Stay in the foreground and don't fork"
#define wc_trivial_usage \
- "[OPTION]... [FILE]..."
+ "[OPTION]... [FILE]..."
#define wc_full_usage \
- "Print line, word, and byte counts for each FILE, and a total line if\n" \
- "more than one FILE is specified. With no FILE, read standard input.\n\n" \
- "Options:\n" \
- "\t-c\tprint the byte counts\n" \
- "\t-l\tprint the newline counts\n" \
- "\t-L\tprint the length of the longest line\n" \
- "\t-w\tprint the word counts"
+ "Print line, word, and byte counts for each FILE, and a total line if\n" \
+ "more than one FILE is specified. With no FILE, read standard input." \
+ "\n\nOptions:\n" \
+ " -c Print the byte counts\n" \
+ " -l Print the newline counts\n" \
+ " -L Print the length of the longest line\n" \
+ " -w Print the word counts"
#define wc_example_usage \
- "$ wc /etc/passwd\n" \
- " 31 46 1365 /etc/passwd\n"
+ "$ wc /etc/passwd\n" \
+ " 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
- "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
- "\t\t[-U|--user-agent agent] url"
+ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
+ " [-U|--user-agent agent] url"
#define wget_full_usage \
- "wget retrieves files via HTTP or FTP\n\n" \
- "Options:\n" \
- "\t-c\tcontinue retrieval of aborted transfers\n" \
- "\t-q\tquiet mode - do not print\n" \
- "\t-P\tSet directory prefix to DIR\n" \
- "\t-O\tsave to filename ('-' for stdout)\n" \
- "\t-U\tadjust 'User-Agent' field\n" \
- "\t-Y\tuse proxy ('on' or 'off')"
+ "Retrieve files via HTTP or FTP" \
+ "\n\nOptions:\n" \
+ " -c Continue retrieval of aborted transfers\n" \
+ " -q Quiet mode - do not print\n" \
+ " -P Set directory prefix to DIR\n" \
+ " -O Save to filename ('-' for stdout)\n" \
+ " -U Adjust 'User-Agent' field\n" \
+ " -Y Use proxy ('on' or 'off')"
#define which_trivial_usage \
- "[COMMAND ...]"
+ "[COMMAND ...]"
#define which_full_usage \
- "Locates a COMMAND."
+ "Locate a COMMAND"
#define which_example_usage \
- "$ which login\n" \
- "/bin/login\n"
+ "$ which login\n" \
+ "/bin/login\n"
#define who_trivial_usage \
- " "
+ " "
#define who_full_usage \
- "Prints the current user names and related information"
+ "Print the current user names and related information"
#define whoami_trivial_usage \
- ""
+ ""
#define whoami_full_usage \
- "Prints the user name associated with the current effective user id."
+ "Print the user name associated with the current effective user id"
#define xargs_trivial_usage \
- "[OPTIONS] [COMMAND] [ARGS...]"
+ "[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
- "Executes COMMAND on every item given by standard input.\n\n" \
- "Options:\n" \
- USE_FEATURE_XARGS_SUPPORT_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
- "\t-r\tDo not run command for empty read lines\n" \
- USE_FEATURE_XARGS_SUPPORT_TERMOPT("\t-x\tExit if the size is exceeded\n") \
- USE_FEATURE_XARGS_SUPPORT_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
- "\t-t\tPrint the command line on stderr before executing it"
+ "Execute COMMAND on every item given by standard input" \
+ "\n\nOptions:\n" \
+ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
+ " -p Prompt the user about whether to run each command\n") \
+ " -r Do not run command for empty read lines\n" \
+ USE_FEATURE_XARGS_SUPPORT_TERMOPT( \
+ " -x Exit if the size is exceeded\n") \
+ USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
+ " -0 Input filenames are terminated by a null character\n") \
+ " -t Print the command line on stderr before executing it"
#define xargs_example_usage \
- "$ ls | xargs gzip\n" \
- "$ find . -name '*.c' -print | xargs rm\n"
+ "$ ls | xargs gzip\n" \
+ "$ find . -name '*.c' -print | xargs rm\n"
#define yes_trivial_usage \
- "[OPTION]... [STRING]..."
+ "[OPTION]... [STRING]..."
#define yes_full_usage \
- "Repeatedly outputs a line with all specified STRING(s), or 'y'."
+ "Repeatedly output a line with all specified STRING(s), or 'y'"
#define zcat_trivial_usage \
- "FILE"
+ "FILE"
#define zcat_full_usage \
- "Uncompress to stdout."
+ "Uncompress to stdout"
#define zcip_trivial_usage \
- "[OPTIONS] ifname script"
+ "[OPTIONS] ifname script"
#define zcip_full_usage \
- "zcip manages a ZeroConf IPv4 link-local address.\n" \
- "Options:\n" \
- "\t-f foreground mode\n" \
- "\t-q quit after address (no daemon)\n" \
- "\t-r 169.254.x.x request this address first\n" \
- "\t-v verbose"
+ "Manage a ZeroConf IPv4 link-local address" \
+ "\n\nOptions:\n" \
+ " -f foreground mode\n" \
+ " -q quit after address (no daemon)\n" \
+ " -r 169.254.x.x request this address first\n" \
+ " -v verbose"
#endif /* __BB_USAGE_H__ */
projects / oweals / busybox.git / blobdiff