+#ifndef __BB_USAGE_H__
+#define __BB_USAGE_H__
+
#define addgroup_trivial_usage \
- "[OPTIONS] group_name [user_name]"
+ "[-g GID] group_name [user_name]"
#define addgroup_full_usage \
- "Adds a group to the system" \
+ "Adds a group to the system\n\n" \
"Options:\n" \
- "\t-g\t\tspecify gid\n"
+ "\t-g GID\t\tspecify gid"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage \
- "Adds a user to the system" \
+ "Adds a user to the system\n\n" \
"Options:\n" \
- "\t-h DIR\t\tAssign home directory DIR\n" \
- "\t-g GECOS\t\tAssign gecos field GECOS\n" \
- "\t-s SHELL\t\tAssign login shell SHELL\n" \
- "\t-G\t\tAdd the user to existing group GROUP\n" \
- "\t-S\t\tcreate a system user (ignored)\n" \
- "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
- "\t-H\t\tDo not create the home directory\n"
+ "\t-h DIR\t\tAssign home directory DIR\n" \
+ "\t-g GECOS\tAssign gecos field GECOS\n" \
+ "\t-s SHELL\tAssign login shell SHELL\n" \
+ "\t-G\t\tAdd the user to existing group GROUP\n" \
+ "\t-S\t\tcreate a system user (ignored)\n" \
+ "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
+ "\t-H\t\tDo not create the home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
"\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
"\t\t\t(positive values make the system clock run fast)\n" \
"\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
- "\t-p timeconstant\n"
+ "\t-p timeconstant"
#define ar_trivial_usage \
- "-[ov][ptx] ARCHIVE FILES"
+ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
"Extract or list FILES from an ar archive.\n\n" \
"Options:\n" \
"\t-p\t\textract to stdout\n" \
"\t-t\t\tlist\n" \
"\t-x\t\textract\n" \
- "\t-v\t\tverbosely list files processed\n"
+ "\t-v\t\tverbosely list files processed"
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
+ "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target"
#define arping_full_usage \
"Ping hosts by ARP requests/replies.\n\n" \
"Options:\n" \
"\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
"\t-I device\tOutgoing interface name, default is eth0\n" \
"\t-s sender\tSet specific sender IP address\n" \
- "\ttarget\t\tTarget IP address of ARP request\n"
+ "\ttarget\t\tTarget IP address of ARP request"
+
+#define ash_trivial_usage \
+ "[FILE]...\n" \
+ "or: ash -c command [args]..."
+#define ash_full_usage \
+ "The ash shell (command interpreter)"
-#define awk_trivial_usage \
- "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]"
-#define awk_full_usage \
+#define awk_trivial_usage \
+ "[OPTION]... [program-text] [FILE ...]"
+#define awk_full_usage \
"Options:\n" \
- "\t-v var=val\tassign value 'val' to variable 'var'\n" \
+ "\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
"\t-F sep\t\tuse 'sep' as field separator\n" \
- "\t-f progname\tread program source from file 'progname'\n"
+ "\t-f progname\t\tread program source from file 'progname'"
#define basename_trivial_usage \
"FILE [SUFFIX]"
"Uncompress to stdout."
#define cal_trivial_usage \
- "[-jy] [[month] year]"
+ "[-jy] [[month] year]"
#define cal_full_usage \
- "Display a calendar.\n" \
- "\nOptions:\n" \
- "\t-j\tUse julian dates.\n" \
- "\t-y\tDisplay the entire year."
+ "Display a calendar.\n" \
+ "\nOptions:\n" \
+ "\t-j\tUse julian dates\n" \
+ "\t-y\tDisplay the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
"$ cat /proc/uptime\n" \
"110716.72 17.67"
+#define chattr_trivial_usage \
+ "[-R] [-+=AacDdijsStTu] [-v version] files..."
+#define chattr_full_usage \
+ "change file attributes on an ext2 fs\n\n" \
+ "Modifiers:\n" \
+ "\t-\tremove attributes\n" \
+ "\t+\tadd attributes\n" \
+ "\t=\tset attributes\n" \
+ "Attributes:\n" \
+ "\tA\tdon't track atime\n" \
+ "\ta\tappend mode only\n" \
+ "\tc\tenable compress\n" \
+ "\tD\twrite dir contents synchronously\n" \
+ "\td\tdo not backup with dump\n" \
+ "\ti\tcannot be modified (immutable)\n" \
+ "\tj\twrite all data to journal first\n" \
+ "\ts\tzero disk storage when deleted\n" \
+ "\tS\twrite file contents synchronously\n" \
+ "\tt\tdisable tail-merging of partial blocks with other files\n" \
+ "\tu\tallow file to be undeleted\n" \
+ "Options:\n" \
+ "\t-R\trecursively list subdirectories\n" \
+ "\t-v\tset the file's version/generation number"
+
#define chgrp_trivial_usage \
"[OPTION]... GROUP FILE..."
#define chgrp_full_usage \
"Change the group membership of each FILE to GROUP.\n" \
"\nOptions:\n" \
- "\t-R\tChanges files and directories recursively."
+ "\t-R\tChanges files and directories recursively"
#define chgrp_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
"Each MODE is one or more of the letters ugoa, one of the\n" \
"symbols +-= and one or more of the letters rwxst.\n\n" \
"Options:\n" \
- "\t-R\tChanges files and directories recursively."
+ "\t-R\tChanges files and directories recursively"
#define chmod_example_usage \
"$ ls -l /tmp/foo\n" \
"-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
#define chown_full_usage \
"Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
"\nOptions:\n" \
- "\t-R\tChanges files and directories recursively.\n" \
- "\t-h\tDo not dereference symbolic links."
+ "\t-R\tChanges files and directories recursively\n" \
+ "\t-h\tDo not dereference symbolic links"
#define chown_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
- "$ mount /dev/hdc1 /mnt -t minix\n" \
- "$ chroot /mnt\n" \
- "$ ls -l /bin/ls\n" \
+ "# mount /dev/hdc1 /mnt -t minix\n" \
+ "# chroot /mnt\n" \
+ "# ls -l /bin/ls\n" \
"-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
"Clear screen."
#define cmp_trivial_usage \
- "[OPTION]... FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2]"
#define cmp_full_usage \
- "Compare files.\n\n" \
+ "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
"Options:\n" \
"\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
- "\t\t for all differing bytes.\n" \
+ "\t\t for all differing bytes\n" \
"\t-s\tquiet mode - do not print"
+#define comm_trivial_usage \
+ "[-123] FILE1 FILE2"
+#define comm_full_usage \
+ "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \
+ "Options:\n" \
+ "\t-1\tSuppress lines unique to FILE1\n" \
+ "\t-2\tSuppress lines unique to FILE2\n" \
+ "\t-3\tSuppress lines common to both files"
+
+#define bbconfig_trivial_usage \
+ ""
+#define bbconfig_full_usage \
+ "Print the config file which built busybox\n"
+
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
#define cp_full_usage \
"Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
"\n" \
"\t-a\tSame as -dpR\n" \
- "\t-d\tPreserves links\n" \
+ "\t-d,-P\tPreserves links\n" \
+ "\t-H,-L\tDereference all symlinks (implied by default)\n" \
"\t-p\tPreserves file attributes if possible\n" \
"\t-f\tforce (implied; ignored) - always set\n" \
- "\t-R\tCopies directories recursively"
+ "\t-i\tinteractive, prompt before overwrite\n" \
+ "\t-R,-r\tCopies directories recursively"
#define cpio_trivial_usage \
"-[dimtuv][F cpiofile]"
"\ti\t\textract\n" \
"\tm\t\tpreserve mtime\n" \
"\tt\t\tlist\n" \
+ "\tv\t\tverbose\n" \
"\tu\t\tunconditional overwrite\n" \
"\tF\t\tinput from file"
"\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
"\t-d num\tdebug level\n" \
"\t-l num\tlog level (8 - default)\n" \
- "\t-S\tlog to syslod (default)\n" \
+ "\t-S\tlog to syslogd (default)\n" \
"\t-L file\tlog to file\n" \
"\t-f\trun in fordeground\n" \
"\t-b\trun in background (default)\n" \
"\t-c dir\tworking dir"
#define crontab_trivial_usage \
- "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]"
+ "[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
"\tfile <opts> replace crontab from file\n" \
"\t- <opts> replace crontab from stdin\n" \
"\t-f N\t\tPrint only these fields\n" \
"\t-n\t\tIgnored"
#define cut_example_usage \
- "$ echo "Hello world" | cut -f 1 -d ' '\n" \
+ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
"Hello\n" \
- "$ echo "Hello world" | cut -f 2 -d ' '\n" \
+ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
"world\n"
#ifdef CONFIG_FEATURE_DATE_ISOFMT
"\nOptions:\n" \
"\t-R\t\tOutputs RFC-822 compliant date string\n" \
"\t-d STRING\tDisplays time described by STRING, not `now'\n" \
- USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
+ USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \
"\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
"\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
- "\t\t\ttime to the indicated precision.\n") \
+ "\t\t\ttime to the indicated precision\n") \
"\t-s\t\tSets time described by STRING\n" \
+ "\t-r FILE\t\tDisplays the last modification time of FILE\n" \
"\t-u\t\tPrints or sets Coordinated Universal Time"
#define date_example_usage \
"$ date\n" \
"expression ..."
#define dc_full_usage \
"This is a Tiny RPN calculator that understands the\n" \
- "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
+ "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
"**, exp, and, or, not, eor.\n" \
"For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
"\nOptions:\n" \
- "p - Prints the value on the top of the stack, without altering the stack.\n" \
- "f - Prints the entire contents of the stack without altering anything.\n" \
- "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
- " Only 10 and 16 are supported.\n"
-
+ "p - Prints the value on the top of the stack, without altering the stack\n" \
+ "f - Prints the entire contents of the stack without altering anything\n" \
+ "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
+ " Only 10 and 16 are supported"
#define dc_example_usage \
- "$ dc 2 2 +\n" \
+ "$ dc 2 2 + p\n" \
"4\n" \
- "$ dc 8 8 * 2 2 + /\n" \
+ "$ dc 8 8 \\* 2 2 + / p\n" \
"16\n" \
- "$ dc 0 1 and\n" \
+ "$ dc 0 1 and p\n" \
"0\n" \
- "$ dc 0 1 or\n" \
+ "$ dc 0 1 or p\n" \
"1\n" \
- "$ echo 72 9 div 8 mul | dc\n" \
+ "$ echo 72 9 div 8 mul p | dc\n" \
"64\n"
#define dd_trivial_usage \
"\tconv=sync\tpad blocks with zeros\n" \
"\n" \
"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
- "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
+ "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
#define dd_example_usage \
"$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
"4+0 records in\n" \
"Deletes user USER from the system"
#ifdef CONFIG_DEVFSD_FG_NP
- #define USAGE_DEVFSD_FG_NP(a) a
+# define USAGE_DEVFSD_FG_NP(a) a
#else
- #define USAGE_DEVFSD_FG_NP(a)
+# define USAGE_DEVFSD_FG_NP(a)
#endif
#define devfsd_trivial_usage \
- "mntpnt [-v]"\
+ "mntpnt [-v]" \
USAGE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
- "Optional daemon for managing devfs (the Linux Device Filesystem).\n" \
+ "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
"\nOptions:\n" \
"\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
"\t-v\tPrint the protocol version numbers for devfsd\n" \
"\t\tDo not poll for events.")
#ifdef CONFIG_FEATURE_HUMAN_READABLE
- #define USAGE_HUMAN_READABLE(a) a
- #define USAGE_NOT_HUMAN_READABLE(a)
+# define USAGE_HUMAN_READABLE(a) a
+# define USAGE_NOT_HUMAN_READABLE(a)
#else
- #define USAGE_HUMAN_READABLE(a)
- #define USAGE_NOT_HUMAN_READABLE(a) a
+# define USAGE_HUMAN_READABLE(a)
+# define USAGE_NOT_HUMAN_READABLE(a) a
#endif
#define df_trivial_usage \
"[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
"/dev/sda3 8690864 8553540 137324 98% /\n"
#define dirname_trivial_usage \
- "[FILENAME ...]"
+ "FILENAME"
#define dirname_full_usage \
"Strips non-directory suffix from FILENAME"
#define dirname_example_usage \
"\t-d\toutput will be in DOS format"
#define dpkg_trivial_usage \
- "-i package_file\n" \
- "[-CPru] package_name"
+ "[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
- "\t-i\tInstall the package\n" \
- "\t-C\tConfigure an unpackaged package\n" \
- "\t-P\tPurge all files of a package\n" \
- "\t-r\tRemove all but the configuration files for a package\n" \
- "\t-u\tUnpack a package, but dont configure it\n"
+ "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
+ "Options:\n" \
+ "\t-i\t\tInstall the package\n" \
+ "\t-l\t\tList of installed packages\n" \
+ "\t-C\t\tConfigure an unpackaged package\n" \
+ "\t-F depends\tIgnore depency problems\n" \
+ "\t-P\t\tPurge all files of a package\n" \
+ "\t-r\t\tRemove all but the configuration files for a package\n" \
+ "\t-u\t\tUnpack a package, but don't configure it"
#define dpkg_deb_trivial_usage \
- "[-cefItxX] FILE [argument]"
+ "[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on debian packages (.debs)\n\n" \
+ "Perform actions on Debian packages (.debs)\n\n" \
"Options:\n" \
"\t-c\tList contents of filesystem tree\n" \
"\t-e\tExtract control files to [argument] directory\n" \
"\t-f\tDisplay control field name starting with [argument]\n" \
- "\t-I\tDisplay the control filenamed [argument]\n" \
- "\t-t\tExtract filesystem tree to stdout in tar format\n" \
"\t-x\tExtract packages filesystem tree to directory\n" \
"\t-X\tVerbose extract"
#define dpkg_deb_example_usage \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
-#define dpkg_divert_trivial_usage \
- "blah"
-#define dpkg_divert_full_usage \
- "blah blah"
-
#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
+ "Displays the DHCP leases granted by udhcpd.\n\n" \
+ "Options:\n" \
"\t-f,\t--file=FILENAME\tLeases file to load\n" \
- "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
- "\t-a,\t--absolute\tInterepret lease times as expire time\n"
+ "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \
+ "\t-a,\t--absolute\tInterpret lease times as expire time"
#ifdef CONFIG_FEATURE_FANCY_ECHO
- #define USAGE_FANCY_ECHO(a) a
+# define USAGE_FANCY_ECHO(a) a
#else
- #define USAGE_FANCY_ECHO(a)
+# define USAGE_FANCY_ECHO(a)
#endif
#define echo_trivial_usage \
"\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
"\t-E\tdisable interpretation of backslash-escaped characters")
#define echo_example_usage \
- "$ echo "Erik is cool"\n" \
+ "$ echo \"Erik is cool\"\n" \
"Erik is cool\n" \
- USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
+ USAGE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
- "$ echo "Erik\\nis\\ncool"\n" \
+ "$ echo \"Erik\\nis\\ncool\"\n" \
"Erik\\nis\\ncool\n")
+#define eject_trivial_usage \
+ "[-t] [DEVICE]"
+#define eject_full_usage \
+ "Eject specified DEVICE (or default /dev/cdrom).\n\n" \
+ "Options:\n" \
+ "\t-t\tclose tray"
+
#define env_trivial_usage \
"[-iu] [-] [name=value]... [command]"
#define env_full_usage \
"up the specified environment.\n\n" \
"Options:\n" \
"\t-, -i\tstart with an empty environment\n" \
- "\t-u\tremove variable from the environment\n"
+ "\t-u\tremove variable from the environment"
+
+#define ether_wake_trivial_usage \
+ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
+#define ether_wake_full_usage \
+ "Send a magic packet to wake up sleeping machines.\n" \
+ "MAC must be a station address (00:11:22:33:44:55) or\n" \
+ " a hostname with a known 'ethers' entry.\n\n" \
+ "Options:\n" \
+ "\t-b\t\tSend wake-up packet to the broadcast address\n" \
+ "\t-i iface\tUse interface ifname instead of the default \"eth0\"\n" \
+ "\t-p pass\tAppend the four or six byte password PW to the packet\n"
#define expr_trivial_usage \
"EXPRESSION"
"\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
"of characters matched or 0."
+#define fakeidentd_trivial_usage \
+ "[-b ip] [STRING]"
+#define fakeidentd_full_usage \
+ "Returns a set string to auth requests\n\n" \
+ "\t-b\tBind to ip address\n" \
+ "\tSTRING\tThe ident answer string (default is nobody)"
+
#define false_trivial_usage \
""
#define false_full_usage \
"Show and modify frame buffer settings"
#define fbset_example_usage \
"$ fbset\n" \
- "mode "1024x768-76"\n" \
+ "mode \"1024x768-76\"\n" \
"\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
"\tgeometry 1024 768 1024 768 16\n" \
"\ttimings 12714 128 32 16 4 128 4\n" \
"\t-n\tDon't verify after format"
#define fdisk_trivial_usage \
- "[-l] [-v] [-b SSZ] [-u] DISK"
+ "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
"Change partition table\n" \
"Options:\n" \
- "-l List partition table(s)\n" \
- "-u Give Start and End in sector (instead of cylinder) units\n" \
- "-s PARTITION Give partition size(s) in blocks\n" \
- "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
- "-v Give fdisk version"
+ "\t-l List partition table(s)\n" \
+ "\t-u Give Start and End in sector (instead of cylinder) units\n" \
+ "\t-s PARTITION Give partition size(s) in blocks\n" \
+ "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
+ "\t-C CYLINDERS Set the number of cylinders\n" \
+ "\t-H HEADS Set the number of heads\n" \
+ "\t-S SECTORS Set the number of sectors\n" \
+ "\t-v Give fdisk version"
#ifdef CONFIG_FEATURE_FIND_TYPE
- #define USAGE_FIND_TYPE(a) a
+# define USAGE_FIND_TYPE(a) a
#else
- #define USAGE_FIND_TYPE(a)
+# define USAGE_FIND_TYPE(a)
#endif
#ifdef CONFIG_FEATURE_FIND_PERM
- #define USAGE_FIND_PERM(a) a
+# define USAGE_FIND_PERM(a) a
#else
- #define USAGE_FIND_PERM(a)
+# define USAGE_FIND_PERM(a)
#endif
#ifdef CONFIG_FEATURE_FIND_MTIME
- #define USAGE_FIND_MTIME(a) a
+# define USAGE_FIND_MTIME(a) a
#else
- #define USAGE_FIND_MTIME(a)
+# define USAGE_FIND_MTIME(a)
#endif
#ifdef CONFIG_FEATURE_FIND_NEWER
- #define USAGE_FIND_NEWER(a) a
+# define USAGE_FIND_NEWER(a) a
#else
- #define USAGE_FIND_NEWER(a)
+# define USAGE_FIND_NEWER(a)
#endif
#ifdef CONFIG_FEATURE_FIND_INUM
- #define USAGE_FIND_INUM(a) a
+# define USAGE_FIND_INUM(a) a
#else
- #define USAGE_FIND_INUM(a)
+# define USAGE_FIND_INUM(a)
#endif
#define find_trivial_usage \
"Search for files in a directory hierarchy. The default PATH is\n" \
"the current directory; default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:\n" \
- "\t-follow\t\tDereference symbolic links.\n" \
- "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
- "\t-print\t\tPrint (default and assumed).\n" \
+ "\t-follow\t\tDereference symbolic links\n" \
+ "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN\n" \
+ "\t-print\t\tPrint (default and assumed)\n" \
USAGE_FIND_TYPE( \
"\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
) USAGE_FIND_PERM( \
) USAGE_FIND_INUM( \
"\n\t-inum N\t\tFile has inode number N")
#define find_example_usage \
- "$ find / -name /etc/passwd\n" \
+ "$ find / -name passwd\n" \
"/etc/passwd\n"
#define fold_trivial_usage \
- "[bsw] [FILE]"
+ "[-bsw] [FILE]"
#define fold_full_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
"standard output.\n\n" \
"Options:\n" \
"\t-b\tcount bytes rather than columns\n" \
"\t-s\tbreak at spaces\n" \
- "\t-w\tuse WIDTH columns instead of 80\n"
+ "\t-w\tuse WIDTH columns instead of 80"
#define free_trivial_usage \
""
"\t-v\tverbose\n" \
"\t-s\tOutputs super-block information\n" \
"\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
- "\t-f\tForce file system check."
+ "\t-f\tForce file system check"
#define ftpget_trivial_usage \
- "[options] remote-host local-directory remote-file"
+ "[options] remote-host local-file remote-file"
#define ftpget_full_usage \
"Retrieve a remote file via FTP.\n\n" \
"Options:\n" \
"\t-v, --verbose Verbose\n" \
"\t-u, --username Username to be used\n" \
"\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used\n"
+ "\t-P, --port Port number to be used"
#define ftpput_trivial_usage \
- "[options] remote-host remote-directory local-file"
+ "[options] remote-host remote-file local-file"
#define ftpput_full_usage \
"Store a local file on a remote machine via FTP.\n\n" \
"Options:\n" \
"\t-v, --verbose Verbose\n" \
"\t-u, --username Username to be used\n" \
"\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used\n"
+ "\t-P, --port Port number to be used"
#define getopt_trivial_usage \
"[OPTIONS]..."
"\t-Q, --quiet-output No normal output\n" \
"\t-s, --shell=shell Set shell quoting conventions\n" \
"\t-T, --test Test for getopt(1) version\n" \
- "\t-u, --unqote Do not quote the output"
+ "\t-u, --unquoted Do not quote the output"
#define getopt_example_usage \
- "$ cat getopt.test\n" \
- "#!/bin/sh\n" \
- "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
- " -n 'example.busybox' -- "$@"`\n" \
- "if [ $? != 0 ] ; then exit 1 ; fi\n" \
- "eval set -- "$GETOPT"\n" \
- "while true ; do\n" \
- " case $1 in\n" \
- " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
- " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
- " -c|--c-long)\n" \
- " case "$2" in\n" \
- " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
- " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
- " esac ;;\n" \
- " --) shift ; break ;;\n" \
- " *) echo \"Internal error!\" ; exit 1 ;;\n" \
- " esac\n" \
- "done\n"
+ "$ cat getopt.test\n" \
+ "#!/bin/sh\n" \
+ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
+ " -n 'example.busybox' -- \"$@\"`\n" \
+ "if [ $? != 0 ] ; then exit 1 ; fi\n" \
+ "eval set -- \"$GETOPT\"\n" \
+ "while true ; do\n" \
+ " case $1 in\n" \
+ " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
+ " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
+ " -c|--c-long)\n" \
+ " case \"$2\" in\n" \
+ " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
+ " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
+ " esac ;;\n" \
+ " --) shift ; break ;;\n" \
+ " *) echo \"Internal error!\" ; exit 1 ;;\n" \
+ " esac\n" \
+ "done\n"
#define getty_trivial_usage \
- "getty [OPTIONS]... baud_rate,... line [termtype]"
+ "[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
- "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \
+ "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
"Options:\n" \
- "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
- "\t-i\t\tDo not display /etc/issue before running login.\n" \
- "\t-L\t\tLocal line, so do not do carrier detect.\n" \
- "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
- "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
- "\t-n\t\tDo not prompt the user for a login name.\n" \
- "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
- "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
- "\t-t timeout\tTerminate after timeout if no username is read.\n" \
- "\t-I initstring\tSets the init string to send before anything else.\n" \
- "\t-H login_host\tLog login_host into the utmp file as the hostname."
+ "\t-h\t\tEnable hardware (RTS/CTS) flow control\n" \
+ "\t-i\t\tDo not display /etc/issue before running login\n" \
+ "\t-L\t\tLocal line, so do not do carrier detect\n" \
+ "\t-m\t\tGet baud rate from modem's CONNECT status message\n" \
+ "\t-w\t\tWait for a CR or LF before sending /etc/issue\n" \
+ "\t-n\t\tDo not prompt the user for a login name\n" \
+ "\t-f issue_file\tDisplay issue_file instead of /etc/issue\n" \
+ "\t-l login_app\tInvoke login_app instead of /bin/login\n" \
+ "\t-t timeout\tTerminate after timeout if no username is read\n" \
+ "\t-I initstring\tSets the init string to send before anything else\n" \
+ "\t-H login_host\tLog login_host into the utmp file as the hostname"
#define grep_trivial_usage \
"Uncompress FILE (or standard input if FILE is '-').\n\n" \
"Options:\n" \
"\t-c\tWrite output to standard output\n" \
+ "\t-f\tForce read when source is a terminal\n" \
"\t-t\tTest compressed file integrity"
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
"Options:\n" \
"\t-c\tWrite output to standard output instead of FILE.gz\n" \
- "\t-d\tdecompress"
+ "\t-d\tDecompress\n" \
+ "\t-f\tForce write when destination is a terminal"
#define gzip_example_usage \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
- ""
+ "[-d<delay>]"
#define halt_full_usage \
- "Halt the system."
+ "Halt the system.\n" \
+ "Options:\n" \
+ "\t-d\t\tdelay interval for halting"
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
#define USAGE_HDPARM_IDENT(a) a
"[options] [device] .."
#define hdparm_full_usage \
"Options:" \
- " -a get/set fs readahead\n" \
- " -A set drive read-lookahead flag (0/1)\n" \
- " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- " -B set Advanced Power Management setting (1-255)\n" \
- " -c get/set IDE 32-bit IO setting\n" \
- " -C check IDE power mode status\n" \
- USAGE_GETSET_DMA(" -d get/set using_dma flag\n") \
- " -D enable/disable drive defect-mgmt\n" \
- " -f flush buffer cache for device on exit\n" \
- " -g display drive geometry\n" \
- " -h display terse usage information\n" \
- " -i display drive identification\n" \
- USAGE_HDPARM_IDENT(" -I detailed/current information directly from drive\n") \
- USAGE_HDPARM_IDENT(" -Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
- " -k get/set keep_settings_over_reset flag (0/1)\n" \
- " -K set drive keep_features_over_reset flag (0/1)\n" \
- " -L set drive doorlock (0/1) (removable harddisks only)\n" \
- " -m get/set multiple sector count\n" \
- " -n get/set ignore-write-errors flag (0/1)\n" \
- " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- " -P set drive prefetch count\n" \
- " -q change next setting quietly\n" \
- " -Q get/set DMA tagged-queuing depth (if supported)\n" \
- " -r get/set readonly flag (DANGEROUS to set)\n" \
- USAGE_SCAN_HWIF(" -R register an IDE interface (DANGEROUS)\n") \
- " -S set standby (spindown) timeout\n" \
- " -t perform device read timings\n" \
- " -T perform cache read timings\n" \
- " -u get/set unmaskirq flag (0/1)\n" \
- USAGE_UNREGISTER_HWIF(" -U un-register an IDE interface (DANGEROUS)\n") \
- " -v defaults; same as -mcudkrag for IDE drives\n" \
- " -V display program version and exit immediately\n" \
- USAGE_DRIVE_RESET(" -w perform device reset (DANGEROUS)\n") \
- " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \
- USAGE_TRISTATE_HWIF(" -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
- " -X set IDE xfer mode (DANGEROUS)\n" \
- " -y put IDE drive in standby mode\n" \
- " -Y put IDE drive to sleep\n" \
- " -Z disable Seagate auto-powersaving mode\n" \
- " -z re-read partition table\n"
+ "\t-a get/set fs readahead\n" \
+ "\t-A set drive read-lookahead flag (0/1)\n" \
+ "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ "\t-B set Advanced Power Management setting (1-255)\n" \
+ "\t-c get/set IDE 32-bit IO setting\n" \
+ "\t-C check IDE power mode status\n" \
+ USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \
+ "\t-D enable/disable drive defect-mgmt\n" \
+ "\t-f flush buffer cache for device on exit\n" \
+ "\t-g display drive geometry\n" \
+ "\t-h display terse usage information\n" \
+ "\t-i display drive identification\n" \
+ USAGE_HDPARM_IDENT("\t-I detailed/current information directly from drive\n") \
+ USAGE_HDPARM_IDENT("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
+ "\t-k get/set keep_settings_over_reset flag (0/1)\n" \
+ "\t-K set drive keep_features_over_reset flag (0/1)\n" \
+ "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
+ "\t-m get/set multiple sector count\n" \
+ "\t-n get/set ignore-write-errors flag (0/1)\n" \
+ "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ "\t-P set drive prefetch count\n" \
+ "\t-q change next setting quietly\n" \
+ "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
+ "\t-r get/set readonly flag (DANGEROUS to set)\n" \
+ USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
+ "\t-S set standby (spindown) timeout\n" \
+ "\t-t perform device read timings\n" \
+ "\t-T perform cache read timings\n" \
+ "\t-u get/set unmaskirq flag (0/1)\n" \
+ USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
+ "\t-v defaults; same as -mcudkrag for IDE drives\n" \
+ "\t-V display program version and exit immediately\n" \
+ USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
+ "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ "\t-X set IDE xfer mode (DANGEROUS)\n" \
+ "\t-y put IDE drive in standby mode\n" \
+ "\t-Y put IDE drive to sleep\n" \
+ "\t-Z disable Seagate auto-powersaving mode\n" \
+ "\t-z re-read partition table"
#ifdef CONFIG_FEATURE_FANCY_HEAD
#define USAGE_FANCY_HEAD(a) a
"[-[bcdefnosvx]] [OPTION] FILE"
#define hexdump_full_usage \
"The hexdump utility is a filter which displays the specified files,\n" \
- "or the standard input, if no files are specified, in a user specified\n"\
+ "or the standard input, if no files are specified, in a user specified\n" \
"format\n" \
"\t-b\t\tOne-byte octal display\n" \
"\t-c\t\tOne-byte character display\n" \
"\t-o\t\tTwo-byte octal display\n" \
"\t-s OFFSET\tSkip offset byte\n" \
"\t-v\t\tdisplay all input data\n" \
- "\t-x\t\tTwo-byte hexadecimal display\n"
+ "\t-x\t\tTwo-byte hexadecimal display"
#define hostid_trivial_usage \
""
"\t-F FILE\tUse the contents of FILE to specify the hostname"
#define hostname_example_usage \
"$ hostname\n" \
- "sage \n"
+ "sage\n"
#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
- #define USAGE_HTTPD_BASIC_AUTH(a) a
- #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
- #define USAGE_HTTPD_AUTH_MD5(a) a
- #else
- #define USAGE_HTTPD_AUTH_MD5(a)
- #endif
+# define USAGE_HTTPD_BASIC_AUTH(a) a
+# ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
+# define USAGE_HTTPD_AUTH_MD5(a) a
+# else
+# define USAGE_HTTPD_AUTH_MD5(a)
+# endif
#else
- #define USAGE_HTTPD_BASIC_AUTH(a)
- #define USAGE_HTTPD_AUTH_MD5(a)
+# define USAGE_HTTPD_BASIC_AUTH(a)
+# define USAGE_HTTPD_AUTH_MD5(a)
#endif
#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
- #define USAGE_HTTPD_STANDALONE(a)
- #define USAGE_HTTPD_SETUID(a)
+# define USAGE_HTTPD_STANDALONE(a)
+# define USAGE_HTTPD_SETUID(a)
#else
- #define USAGE_HTTPD_STANDALONE(a) a
- #ifdef CONFIG_FEATURE_HTTPD_SETUID
- #define USAGE_HTTPD_SETUID(a) a
- #else
- #define USAGE_HTTPD_SETUID(a)
- #endif
+# define USAGE_HTTPD_STANDALONE(a) a
+# ifdef CONFIG_FEATURE_HTTPD_SETUID
+# define USAGE_HTTPD_SETUID(a) a
+# else
+# define USAGE_HTTPD_SETUID(a)
+# endif
#endif
#define httpd_trivial_usage \
"[-c <conf file>]" \
USAGE_HTTPD_SETUID(" [-u user]") \
USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
+ " [-h home]" \
" [-d/-e <string>]"
#define httpd_full_usage \
- "Listens for incoming http server requests.\n"\
- "Options:\n" \
- "\t-c FILE\tSpecifies configuration file. (default httpd.conf)\n" \
- USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
- USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privilegies port\n") \
- USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
- USAGE_HTTPD_AUTH_MD5("\t-m PASS\tCrypt PASS with md5 algorithm\n") \
- "\t-e STRING\tHtml encode STRING\n" \
- "\t-d STRING\tURL decode STRING"
+ "Listens for incoming http server requests.\n\n" \
+ "Options:\n" \
+ "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
+ USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
+ USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \
+ USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
+ USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
+ "\t-h HOME \tSpecifies http HOME directory (default ./)\n" \
+ "\t-e STRING\tHtml encode STRING\n" \
+ "\t-d STRING\tURL decode STRING"
#define hwclock_trivial_usage \
"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
"\t-l\tthe hardware clock is kept in local time"
#ifdef CONFIG_SELINUX
-#define USAGE_SELINUX(a, b) a
+# define USAGE_SELINUX(a) a
#else
-#define USAGE_SELINUX(a, b) b
+# define USAGE_SELINUX(a)
#endif
#define id_trivial_usage \
#define id_full_usage \
"Print information for USERNAME or the current user\n\n" \
"Options:\n" \
+ USAGE_SELINUX("\t-c\tprints only the security context\n") \
"\t-g\tprints only the group ID\n" \
"\t-u\tprints only the user ID\n" \
- USAGE_SELINUX("\t-c\tprints only the security context\n", "") \
- "\t-n\tprint a name instead of a number (with for -ug)\n" \
- "\t-r\tprints the real user ID instead of the effective ID (with -ug)"
+ "\t-n\tprint a name instead of a number\n" \
+ "\t-r\tprints the real user ID instead of the effective ID"
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
#ifdef CONFIG_FEATURE_IFCONFIG_SLIP
- #define USAGE_SIOCSKEEPALIVE(a) a
+# define USAGE_SIOCSKEEPALIVE(a) a
#else
- #define USAGE_SIOCSKEEPALIVE(a)
+# define USAGE_SIOCSKEEPALIVE(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- #define USAGE_IFCONFIG_MII(a) a
+# define USAGE_IFCONFIG_MII(a) a
#else
- #define USAGE_IFCONFIG_MII(a)
+# define USAGE_IFCONFIG_MII(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_HW
- #define USAGE_IFCONFIG_HW(a) a
+# define USAGE_IFCONFIG_HW(a) a
#else
- #define USAGE_IFCONFIG_HW(a)
+# define USAGE_IFCONFIG_HW(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_STATUS
- #define USAGE_IFCONFIG_OPT_A(a) a
+# define USAGE_IFCONFIG_OPT_A(a) a
#else
- #define USAGE_IFCONFIG_OPT_A(a)
+# define USAGE_IFCONFIG_OPT_A(a)
#endif
#ifdef CONFIG_FEATURE_IPV6
- #define USAGE_IPV6(a) a
+# define USAGE_IPV6(a) a
#else
- #define USAGE_IPV6(a)
+# define USAGE_IPV6(a)
#endif
#define ifconfig_trivial_usage \
"\t[netmask <address>] [dstaddr <address>]\n" \
USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
"\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
- "[metric <NN>] [mtu <NN>]\n" \
+ "[metric <NN>] [mtu <NN>]\n" \
"\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
"\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
#define ifup_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifup_full_usage \
- "Usage: ifup <options> <ifaces...>\n\n" \
+ "ifup <options> <ifaces...>\n\n" \
"Options:\n" \
"\t-h\tthis help\n" \
"\t-a\tde/configure all interfaces automatically\n" \
"\t\t\t(note that this option doesn't disable mappings)\n" \
"\t-v\tprint out what would happen before doing it\n" \
"\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration\n"
+ "\t-f\tforce de/configuration"
#define ifdown_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifdown_full_usage \
- "Usage: ifdown <options> <ifaces...>\n\n" \
+ "ifdown <options> <ifaces...>\n\n" \
"Options:\n" \
"\t-h\tthis help\n" \
"\t-a\tde/configure all interfaces automatically\n" \
"\t\t(note that this option doesn't disable mappings)\n" \
"\t-v\tprint out what would happen before doing it\n" \
"\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration\n"
+ "\t-f\tforce de/configuration"
#define inetd_trivial_usage \
- "[-q len] [conf]"
+ "[-f] [-q len] [conf]"
#define inetd_full_usage \
- "Usage: [-q len] [conf]\n\n" \
+ "Listens for network connections and launches programs\n\n" \
"Option:\n" \
+ "\t-f\tRun as a foreground progress\n" \
"\t-q\tSets the size of the socket listen queue to\n" \
- "the specified value. Default is 128."
+ "\t\tthe specified value. Default is 128"
#define init_trivial_usage \
""
"\n" \
" <id>:<runlevels>:<action>:<process>\n" \
"\n" \
-" <id>: \n" \
+" <id>:\n" \
"\n" \
" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
" The id field is used by BusyBox init to specify the controlling tty for\n" \
" the specified process to run on. The contents of this field are\n" \
-" appended to "/dev/" and used as-is. There is no need for this field to\n" \
+" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
" be unique, although if it isn't you may have strange results. If this\n" \
" field is left blank, the controlling tty is set to the console. Also\n" \
" note that if BusyBox detects that a serial console is in use, then only\n" \
" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
" stinkin' utmp.\n" \
"\n" \
-" <runlevels>: \n" \
+" <runlevels>:\n" \
"\n" \
" The runlevels field is completely ignored.\n" \
"\n" \
-" <action>: \n" \
+" <action>:\n" \
"\n" \
-" Valid actions include: sysinit, respawn, askfirst, wait, \n" \
+" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
" once, restart, ctrlaltdel, and shutdown.\n" \
"\n" \
" The available actions can be classified into two groups: actions\n" \
" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
" respawning out of control. The 'askfirst' actions acts just like\n" \
" respawn, except that before running the specified process it\n" \
-" displays the line "Please press Enter to activate this console."\n" \
+" displays the line \"Please press Enter to activate this console.\"\n" \
" and then waits for the user to press enter before starting the\n" \
-" specified process. \n" \
+" specified process.\n" \
"\n" \
" Unrecognized actions (like initdefault) will cause init to emit an\n" \
" error message, and then go along with its business. All actions are\n" \
" run in the order they appear in /etc/inittab.\n" \
"\n" \
-" <process>: \n" \
+" <process>:\n" \
"\n" \
-" Specifies the process to be executed and it's command line.\n" \
+" Specifies the process to be executed and its command line.\n" \
"\n" \
"Example /etc/inittab file:\n" \
"\n" \
" \n" \
" # /bin/sh invocations on selected ttys\n" \
" #\n" \
-" # Start an "askfirst" shell on the console (whatever that may be)\n" \
+" # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
" ::askfirst:-/bin/sh\n" \
-" # Start an "askfirst" shell on /dev/tty2-4\n" \
+" # Start an \"askfirst\" shell on /dev/tty2-4\n" \
" tty2::askfirst:-/bin/sh\n" \
" tty3::askfirst:-/bin/sh\n" \
" tty4::askfirst:-/bin/sh\n" \
" ::shutdown:/sbin/swapoff -a\n"
#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
- #define USAGE_INSMOD_MAP(a) a
+# define USAGE_INSMOD_MAP(a) a
#else
- #define USAGE_INSMOD_MAP(a)
+# define USAGE_INSMOD_MAP(a)
#endif
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
"Loads the specified kernel modules into the kernel.\n\n" \
"Options:\n" \
- "\t-f\tForce module to load into the wrong kernel version.\n" \
- "\t-k\tMake module autoclean-able.\n" \
+ "\t-f\tForce module to load into the wrong kernel version\n" \
+ "\t-k\tMake module autoclean-able\n" \
"\t-v\tverbose output\n" \
+ "\t-q\tquiet output\n" \
"\t-L\tLock to prevent simultaneous loads of a module\n" \
- USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \
- "\t-x\tdo not export externs\n"
+ USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
+ "\t-o NAME\tSet internal module name to NAME\n" \
+ "\t-x\tdo not export externs"
#define install_trivial_usage \
- "[cgmops] [sources] <dest|directory>"
+ "[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
- "copy files and set attributes\n\n" \
+ "Copies files and set attributes\n\n" \
"Options:\n" \
"\t-c\tcopy the file, default\n" \
+ "\t-d\tcreate directories\n" \
"\t-g\tset group ownership\n" \
"\t-m\tset permission modes\n" \
"\t-o\tset ownership\n" \
"\t-p\tpreserve date\n" \
- "\t-s\tstrip symbol tables\n"
+ "\t-s\tstrip symbol tables"
#define ip_trivial_usage \
"[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
#define ip_full_usage \
"ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
"where OBJECT := { link | addr | route | tunnel }\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
- "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
+ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
+ "\t\t[ dev STRING ] [ to PREFIX ] }"
#define ipaddr_full_usage \
"ipaddr {add|del} IFADDR dev STRING\n" \
"ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
- " [ to PREFIX ] [ label PATTERN ]\n" \
- "IFADDR := PREFIX | ADDR peer PREFIX\n" \
- " [ broadcast ADDR ] [ anycast ADDR ]\n" \
- " [ label STRING ] [ scope SCOPE-ID ]\n" \
- "SCOPE-ID := [ host | link | global | NUMBER ]\n"
-
-#ifndef CONFIG_FEATURE_IPCALC_FANCY
-#define ipcalc_trivial_usage \
- "[--broadcast] [--netmask] [--network] ipaddr <netmask>"
-
-#define ipcalc_full_usage \
- "Calculate IP network settings from a IP address\n\n" \
- "Options:\n" \
- "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
- "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
- "\t-w\t--network\tDisplay calculated network address."
+ "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
+ "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
+ "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
+ "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
+ "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
+
+#ifdef CONFIG_FEATURE_IPCALC_FANCY
+# define XUSAGE_IPCALC_FANCY(a) a
#else
+# define XUSAGE_IPCALC_FANCY(a)
+#endif
#define ipcalc_trivial_usage \
- "[OPTION]... ipaddr <netmask>"
-
+ "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
"Calculate IP network settings from a IP address\n\n" \
"Options:\n" \
- "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
- "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
- "\t-w\t--network\tDisplay calculated network address.\n" \
- "\t-h\t--hostname\tDisplay first resolved host name.\n" \
- "\t-s\t--silent\tDon't ever display error messages."
-#endif
-
-#define ipcalc_notes_usage \
- "ipcalc provides a simple way to calculate IP information for\n" \
- "a host. The various options specify what information ipcalc\n" \
- "should display on standard out. Multiple options may be\n" \
- "specified.\n"
+ "\t-b\t--broadcast\tDisplay calculated broadcast address\n" \
+ "\t-n\t--network\tDisplay calculated network address\n" \
+ "\t-m\t--netmask\tDisplay default netmask for IP." \
+ XUSAGE_IPCALC_FANCY( \
+ "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK." \
+ "\t-h\t--hostname\tDisplay first resolved host name\n" \
+ "\t-s\t--silent\tDon't ever display error messages.")
+
+#define ipcrm_trivial_usage \
+ "[-[MQS] key] [-[mqs] id]"
+#define ipcrm_full_usage \
+ "The upper-case options MQS are used to remove a shared memory\n" \
+ "segment by an shmkey value. The lower-case options mqs are used\n" \
+ "to remove a segment by shmid value.\n" \
+ "\t-m | -M\tRemove the memory segment after the last detatch\n" \
+ "\t-q | -Q\tRemove the message queue\n" \
+ "\t-s | -S\tRemove the semaphore\n"
+
+#define ipcs_trivial_usage \
+ "[[-smq] -i shmid] | [[-asmq] [-tclup]]"
+#define ipcs_full_usage \
+ "\t-i\tspecify a specific resource id\n" \
+ "Resource specification:\n" \
+ "\t-m\tshared memory segments\n" \
+ "\t-q\tmessage queues\n" \
+ "\t-s\tsempahore arrays\n" \
+ "\t-a\tall (default)\n" \
+ "Output format:\n" \
+ "\t-t\ttime\n" \
+ "\t-p\tpid\n" \
+ "\t-s\tcreator\n" \
+ "\t-a\tlimits\n" \
+ "\t-i\tsummary\n"
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
"iplink set DEVICE { up | down | arp { on | off } |\n" \
- " dynamic { on | off } |\n" \
- " mtu MTU }\n" \
- "iplink show [ DEVICE ]\n"
+ "\t\t\tdynamic { on | off } |\n" \
+ "\t\t\tmtu MTU }\n" \
+ "\tiplink show [ DEVICE ]"
#define iproute_trivial_usage \
- "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
+ "{ list | flush | { add | del | change | append |\n" \
+ "\t\treplace | monitor } ROUTE }"
#define iproute_full_usage \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
- " [ oif STRING ] [ tos TOS ]\n" \
- "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
- "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
- "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"
+ "\t\t\t[ oif STRING ] [ tos TOS ]\n" \
+ "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
+ "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
+ "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
#define iptunnel_trivial_usage \
- "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+ "{ add | change | del | show } [ NAME ]\n" \
+ "\t\t[ mode { ipip | gre | sit } ]\n" \
+ "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
#define iptunnel_full_usage \
"iptunnel { add | change | del | show } [ NAME ]\n" \
- " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
- " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
- " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"
-
-#define insmod_ng_trivial_usage \
- "MODULE [symbol=value]..."
-#define insmod_ng_full_usage \
- "Loads the specified kernel modules into the kernel."
+ "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
+ "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
+ "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
#define kill_trivial_usage \
"[-signal] process-id [process-id ...]"
#define kill_full_usage \
- "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
+ "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \
"Options:\n" \
- "\t-l\tList all signal names and numbers."
+ "\t-l\tList all signal names and numbers"
#define kill_example_usage \
"$ ps | grep apache\n" \
"252 root root S [apache]\n" \
"$ kill 252\n"
#define killall_trivial_usage \
- "[-signal] process-name [process-name ...]"
+ "[-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
- "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
+ "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \
"Options:\n" \
- "\t-l\tList all signal names and numbers."
+ "\t-l\tList all signal names and numbers\n" \
+ "\t-q\tDo not complain if no processes were killed"
#define killall_example_usage \
"$ killall apache\n"
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
- "Kernel logger.\n"\
- "Options:\n"\
- "\t-c n\tSets the default log level of console messages to n.\n"\
- "\t-n\tRun as a foreground process."
+ "Kernel logger.\n" \
+ "Options:\n" \
+ "\t-c n\tSets the default log level of console messages to n\n" \
+ "\t-n\tRun as a foreground process"
#define length_trivial_usage \
"STRING"
"$ length Hello\n" \
"5\n"
+#define less_trivial_usage \
+ "[-EMNmh~?] FILE1 FILE2..."
+#define less_full_usage \
+ "View a file or list of files. The position within files can be\n" \
+ "changed, and files can be manipulated in various ways with the\n" \
+ "following options:\n\n" \
+ "\t-E\tQuit once the end of a file is reached\n" \
+ "\t-M\tDisplay a status line containing the current line numbers\n" \
+ "\t\tand the percentage through the file\n" \
+ "\t-N\tPrefix line numbers to each line\n" \
+ "\t-m\tDisplay a status line containing the percentage through the\n" \
+ "\t\tfile\n" \
+ "\t-~\tSuppress ~s displayed when input past the end of the file is\n" \
+ "\t\treached.\n" \
+ "\t-h, -?\tDisplay this help message\n"
+
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage \
- "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
+ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \
"\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
"Options:\n" \
"\t-s\tmake symbolic links instead of hard links\n" \
"\t-f\tremove existing destination files\n" \
- "\t-n\tno dereference symlinks - treat like normal file"
+ "\t-n\tno dereference symlinks - treat like normal file\n" \
+ "\t-b\tmake a backup of the target (if exists) before link operation\n" \
+ "\t-S suffix\tuse suffix instead of ~ when making backup files"
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
#define logger_full_usage \
"Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
"Options:\n" \
- "\t-s\tLog to stderr as well as the system log.\n" \
- "\t-t\tLog using the specified tag (defaults to user name).\n" \
- "\t-p\tEnter the message with the specified priority.\n" \
- "\t\tThis may be numerical or a ``facility.level'' pair."
+ "\t-s\tLog to stderr as well as the system log\n" \
+ "\t-t TAG\tLog using the specified tag (defaults to user name)\n" \
+ "\t-p PRIORITY\tEnter the message with the specified priority\n" \
+ "\t\tThis may be numerical or a ``facility.level'' pair"
#define logger_example_usage \
- "$ logger "hello"\n"
+ "$ logger \"hello\"\n"
#define login_trivial_usage \
"[OPTION]... [username] [ENV=VAR ...]"
"Begin a new session on the system\n\n" \
"Options:\n" \
"\t-f\tDo not authenticate (user already authenticated)\n" \
- "\t-h\tName of the remote host for this login.\n" \
- "\t-p\tPreserve environment."
+ "\t-h\tName of the remote host for this login\n" \
+ "\t-p\tPreserve environment"
#define logname_trivial_usage \
""
#define logread_trivial_usage \
"[OPTION]..."
-
#define logread_full_usage \
- "Shows the messages from syslogd (using circular buffer).\n\n"
+ "Shows the messages from syslogd (using circular buffer).\n\n" \
"Options:\n" \
"\t-f\t\toutput data as the log grows"
#define losetup_full_usage \
"Associate LOOPDEVICE with FILE.\n\n" \
"Options:\n" \
- "\t-d\t\tDisassociate LOOPDEVICE.\n" \
- "\t-o OFFSET\tStart OFFSET bytes into FILE.\n"
+ "\t-d\t\tDisassociate LOOPDEVICE\n" \
+ "\t-o OFFSET\tStart OFFSET bytes into FILE"
#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
- #define USAGE_LS_TIMESTAMPS(a) a
+# define USAGE_LS_TIMESTAMPS(a) a
#else
- #define USAGE_LS_TIMESTAMPS(a)
+# define USAGE_LS_TIMESTAMPS(a)
#endif
#ifdef CONFIG_FEATURE_LS_FILETYPES
- #define USAGE_LS_FILETYPES(a) a
+# define USAGE_LS_FILETYPES(a) a
#else
- #define USAGE_LS_FILETYPES(a)
+# define USAGE_LS_FILETYPES(a)
#endif
#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
- #define USAGE_LS_FOLLOWLINKS(a) a
+# define USAGE_LS_FOLLOWLINKS(a) a
#else
- #define USAGE_LS_FOLLOWLINKS(a)
+# define USAGE_LS_FOLLOWLINKS(a)
#endif
#ifdef CONFIG_FEATURE_LS_RECURSIVE
- #define USAGE_LS_RECURSIVE(a) a
+# define USAGE_LS_RECURSIVE(a) a
#else
- #define USAGE_LS_RECURSIVE(a)
+# define USAGE_LS_RECURSIVE(a)
#endif
#ifdef CONFIG_FEATURE_LS_SORTFILES
- #define USAGE_LS_SORTFILES(a) a
+# define USAGE_LS_SORTFILES(a) a
#else
- #define USAGE_LS_SORTFILES(a)
+# define USAGE_LS_SORTFILES(a)
#endif
#ifdef CONFIG_FEATURE_AUTOWIDTH
- #define USAGE_AUTOWIDTH(a) a
+# define USAGE_AUTOWIDTH(a) a
#else
- #define USAGE_AUTOWIDTH(a)
+# define USAGE_AUTOWIDTH(a)
#endif
+#ifdef CONFIG_FEATURE_LS_COLOR
+ #define USAGE_LS_COLOR(a) a
+#else
+ #define USAGE_LS_COLOR(a)
+#endif
+
#define ls_trivial_usage \
- "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K", "") "] [filenames...]"
+ "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
"List directory contents\n\n" \
"Options:\n" \
"\t-a\tdo not hide entries starting with .\n" \
"\t-C\tlist entries by columns\n" \
USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
+ USAGE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \
"\t-d\tlist directory entries instead of contents\n" \
USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
"\t-x\tlist entries by lines instead of by columns\n" \
USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
USAGE_HUMAN_READABLE( \
- "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
- USAGE_SELINUX("\t-k\tprint security context\n\t-K\tprint security context in long format\n", ""))
+ "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
+ USAGE_SELINUX("\t-k\tprint security context\n") \
+ USAGE_SELINUX("\t-K\tprint security context in long format\n")
+
+#define lsattr_trivial_usage \
+ "[-Radlv] [files...]"
+#define lsattr_full_usage \
+ "list file attributes on an ext2 fs\n\n" \
+ "Options:\n" \
+ "\t-R\trecursively list subdirectories\n" \
+ "\t-a\tdo not hide entries starting with .\n" \
+ "\t-d\tlist directory entries instead of contents\n" \
+ "\t-l\tprint long flag names\n" \
+ "\t-v\tlist the file's version/generation number"
#define lsmod_trivial_usage \
""
#define lsmod_full_usage \
"List the currently loaded kernel modules."
+#ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage \
"\tc or u:\tMake a character (un-buffered) device.\n" \
"\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
"FIRST specifies the number appended to NAME to create the first device.\n" \
- "LAST specifies the number of the last item that should be created.\n" \
+ "LAST specifies the number of the last item that should be created\n" \
"If 's' is the last argument, the base device is created as well.\n\n" \
"For example:\n" \
"\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
"\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
- "$ makedevs /dev/ttyS c 4 66 2 63\n" \
+ "# makedevs /dev/ttyS c 4 66 2 63\n" \
"[creates ttyS2-ttyS63]\n" \
- "$ makedevs /dev/hda b 3 0 0 8 s\n" \
+ "# makedevs /dev/hda b 3 0 0 8 s\n" \
"[creates hda,hda1-hda8]\n"
+#endif
+
+#ifdef CONFIG_FEATURE_MAKEDEVS_TABLE
+#define makedevs_trivial_usage \
+ "[-d device_table] rootdir"
+#define makedevs_full_usage \
+ "Creates a range of special files as specified in a device table.\n" \
+ "Device table entries take the form of:\n" \
+ "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
+ "Where name is the file name, type can be one of:\n" \
+ " f A regular file\n" \
+ " d Directory\n" \
+ " c Character special device file\n" \
+ " b Block special device file\n" \
+ " p Fifo (named pipe)\n" \
+ "uid is the user id for the target file, gid is the group id for the\n" \
+ "target file. The rest of the entries (major, minor, etc) apply to\n" \
+ "to device special files. A '-' may be used for blank entries."
+#define makedevs_example_usage \
+ "For example:\n" \
+ "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
+ "/dev d 755 0 0 - - - - -\n" \
+ "/dev/console c 666 0 0 5 1 - - -\n" \
+ "/dev/null c 666 0 0 1 3 0 0 -\n" \
+ "/dev/zero c 666 0 0 1 5 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 0 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
+ "Will Produce:\n" \
+ "/dev\n" \
+ "/dev/console\n" \
+ "/dev/null\n" \
+ "/dev/zero\n" \
+ "/dev/hda\n" \
+ "/dev/hda[0-15]\n"
+#endif
#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
#define USAGE_MD5_SHA1_SUM_CHECK(a) a
"^D\n"
#define mesg_trivial_usage \
- "mesg [y|n]"
+ "[y|n]"
#define mesg_full_usage \
- "mesg [Y|N], controls write access to your terminal\n" \
- "\ty\tAllow write access to your terminal.\n" \
- "\tn\tDisallow write access to your terminal.\n"
-
-#define minit_trivial_usage \
- "[-spPrRC]"
-#define minit_full_usage \
- "[-spPrRC]"
+ "mesg controls write access to your terminal\n" \
+ "\ty\tAllow write access to your terminal\n" \
+ "\tn\tDisallow write access to your terminal"
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
"/tmp/foo/bar/baz: No such file or directory\n" \
"$ mkdir -p /tmp/foo/bar/baz\n"
+#define mke2fs_trivial_usage \
+ "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
+ "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
+ "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
+ "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
+ "[-M last-mounted-directory] [-S] [-T filesystem-type] " \
+ "device [blocks-count]"
+#define mke2fs_full_usage \
+ "\t-b size\tblock size in bytes\n" \
+ "\t-c\tcheck for bad blocks before creating\n" \
+ "\t-E opts\tset extended options\n" \
+ "\t-f size\tfragment size in bytes\n" \
+ "\t-F\tforce (ignore sanity checks)\n" \
+ "\t-g num\tnumber of blocks in a block group\n" \
+ "\t-i ratio\tthe bytes/inode ratio\n" \
+ "\t-j\tcreate a journal (ext3)\n" \
+ "\t-J opts\tset journal options (size/device)\n" \
+ "\t-l file\tread bad blocks list from file\n" \
+ "\t-L lbl\tset the volume label\n" \
+ "\t-m percent\tpercent of fs blocks to reserve for admin\n" \
+ "\t-M dir\tset last mounted directory\n" \
+ "\t-n\tdo not actually create anything\n" \
+ "\t-N num\tnumber of inodes to create\n" \
+ "\t-o os\tset the 'creator os' field\n" \
+ "\t-O features\tdir_index/filetype/has_journal/journal_dev/sparse_super\n" \
+ "\t-q\tquiet execution\n" \
+ "\t-r rev\tset filesystem revision\n" \
+ "\t-S\twrite superblock and group descriptors only\n" \
+ "\t-T fs-type\tset usage type (news/largefile/largefile4)\n" \
+ "\t-v\tverbose execution"
+
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage \
"Options:\n" \
"\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
"TYPEs include:\n" \
- "\tb:\tMake a block (buffered) device.\n" \
- "\tc or u:\tMake a character (un-buffered) device.\n" \
- "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
+ "\tb:\tMake a block (buffered) device\n" \
+ "\tc or u:\tMake a character (un-buffered) device\n" \
+ "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes"
#define mknod_example_usage \
- "$ mknod /dev/fd0 b 2 0 \n" \
+ "$ mknod /dev/fd0 b 2 0\n" \
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
#define mkswap_full_usage \
"Prepare a disk partition to be used as a swap partition.\n\n" \
"Options:\n" \
- "\t-c\t\tCheck for read-ability.\n" \
- "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
- "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
- "\tblock-count\tNumber of block to use (default is entire partition)."
+ "\t-c\t\tCheck for read-ability\n" \
+ "\t-v0\t\tMake version 0 swap [max 128 Megs]\n" \
+ "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117)\n" \
+ "\tblock-count\tNumber of block to use (default is entire partition)"
#define mktemp_trivial_usage \
- "[-q] TEMPLATE"
+ "[-dq] TEMPLATE"
#define mktemp_full_usage \
"Creates a temporary file with its name based on TEMPLATE.\n" \
- "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)."
+ "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \
+ "Options:\n" \
+ "\t-d\t\tMake a directory instead of a file\n" \
+ "\t-q\t\tFail silently if an error occurs"
#define mktemp_example_usage \
"$ mktemp /tmp/temp.XXXXXX\n" \
"/tmp/temp.mWiLjM\n" \
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
- "[FILE ...]"
+ "[-knqrsv] [MODULE ...]"
#define modprobe_full_usage \
- "Used for high level module loading and unloading."
+ "Used for high level module loading and unloading.\n\n" \
+ "Options:\n" \
+ "\t-k\tMake module autoclean-able\n" \
+ "\t-n\tJust show what would be done\n" \
+ "\t-q\tQuiet output\n" \
+ "\t-r\tRemove module (stacks) or do autoclean\n" \
+ "\t-s\tReport via syslog instead of stderr\n" \
+ "\t-v\tVerbose output"
#define modprobe_example_usage \
"$ modprobe cdrom\n"
"$ dmesg | more\n"
#ifdef CONFIG_FEATURE_MOUNT_LOOP
- #define USAGE_MOUNT_LOOP(a) a
+# define USAGE_MOUNT_LOOP(a) a
#else
- #define USAGE_MOUNT_LOOP(a)
+# define USAGE_MOUNT_LOOP(a)
#endif
#ifdef CONFIG_FEATURE_MTAB_SUPPORT
- #define USAGE_MTAB(a) a
+# define USAGE_MTAB(a) a
#else
- #define USAGE_MTAB(a)
+# define USAGE_MTAB(a)
#endif
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem\n\n" \
+ "Mount a filesystem. Autodetection of filesystem type requires the\n" \
+ "/proc filesystem be already mounted.\n\n" \
"Flags:\n" \
- "\t-a:\t\tMount all filesystems in fstab.\n" \
+ "\t-a:\t\tMount all filesystems in fstab\n" \
USAGE_MTAB( \
- "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
- "\t-n:\t\tDon't write a mount table entry.\n" \
+ "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \
+ "\t-n:\t\tDon't write a mount table entry\n" \
) \
- "\t-o option:\tOne of many filesystem options, listed below.\n" \
- "\t-r:\t\tMount the filesystem read-only.\n" \
- "\t-t fs-type:\tSpecify the filesystem type.\n" \
- "\t-w:\t\tMount for reading and writing (default).\n" \
+ "\t-o option:\tOne of many filesystem options, listed below\n" \
+ "\t-r:\t\tMount the filesystem read-only\n" \
+ "\t-t fs-type:\tSpecify the filesystem type\n" \
+ "\t-w:\t\tMount for reading and writing (default)\n" \
"\n" \
"Options for use with the \"-o\" flag:\n" \
- "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
- "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
- "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
- "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
+ "\tasync/sync:\tWrites are asynchronous / synchronous\n" \
+ "\tatime/noatime:\tEnable / disable updates to inode access times\n" \
+ "\tdev/nodev:\tAllow use of special device files / disallow them\n" \
+ "\texec/noexec:\tAllow use of executable files / disallow them\n" \
USAGE_MOUNT_LOOP( \
- "\tloop:\t\tMounts a file via loop device.\n" \
+ "\tloop:\t\tMounts a file via loop device\n" \
) \
- "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
- "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
- "\tro/rw:\t\tMount for read-only / read-write.\n" \
- "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
- "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
- "You'll have to see the written documentation for those filesystems."
+ "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them\n" \
+ "\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \
+ "\tro/rw:\t\tMount for read-only / read-write\n" \
+ "\tbind:\t\tUse the linux 2.4.x \"bind\" feature\n" \
+ "\nThere are EVEN MORE flags that are specific to each filesystem\n" \
+ "You'll have to see the written documentation for those filesystems"
#define mount_example_usage \
"$ mount\n" \
"/dev/hda3 on / type minix (rw)\n" \
"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
"$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
-#define msvc_trivial_usage \
- "-[udorspchaitkx] service"
-#define msvc_full_usage \
- "[option] service\n" \
- "Where option is one of\n" \
- "\t-u\tUp. If the service is not running, start it. If the service stops, restart it.\n" \
- "\t-d\tDown. If the service is running, stop it, do not restart it.\n" \
- "\t-o\tOnce. If the service is not running, start it. Do not restart it if it stops.\n" \
- "\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \
- "\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \
- "\t-p\tPause. Send the service a STOP signal.\n" \
- "\t-c\tContinue. Send the service a CONT signal.\n" \
- "\t-h\tHangup. Send the service a HUP signal.\n" \
- "\t-a\tAlarm. Send the service an ALRM signal.\n" \
- "\t-i\tInterrupt. Send the service an INT signal.\n" \
- "\t-t\tTerminate. Send the service a TERM signal.\n" \
- "\t-k\tKill. Send the service a KILL signal.\n" \
- "\t-x\tExit. supervise will quit as soon as the service is down.\n"
+#define mountpoint_trivial_usage \
+ "[-q] <[-d] DIR | -x DEVICE>"
+#define mountpoint_full_usage \
+ "mountpoint checks if the directory is a mountpoint\n\n" \
+ "Options:\n" \
+ "\t-q:\t\tBe more quiet\n" \
+ "\t-d:\t\tPrint major/minor device number of the filesystem\n" \
+ "\t-x:\t\tPrint major/minor device number of the blockdevice"
+#define mountpoint_example_usage \
+ "$ mountpoint /proc\n" \
+ "/proc is not a mountpoint\n" \
+ "$ mountpoint /sys\n" \
+ "/sys is a mountpoint\n"
#define mt_trivial_usage \
"[-f device] opcode value"
"setpart tell unload unlock weof wset"
#define mv_trivial_usage \
- "SOURCE DEST\n" \
- "or: mv SOURCE... DIRECTORY"
+ "[OPTION]... SOURCE DEST\n" \
+ "or: mv [OPTION]... SOURCE... DIRECTORY"
#define mv_full_usage \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
+ "Options:\n" \
+ "\t-f\tdon't prompt before overwriting\n" \
+ "\t-i\tinteractive, prompt before overwrite"
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
- "Nameif renaming network interface while it in the down state.\n\n" \
- "Options:\n" \
- "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
- "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
- "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n"
+ "Nameif renaming network interface while it in the down state.\n\n" \
+ "Options:\n" \
+ "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
+ "\t-s\t\tUse syslog (LOCAL0 facility)\n" \
+ "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
#define nameif_example_usage \
- "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
- " or\n" \
- "$ nameif -c /etc/my_mactab_file\n" \
+ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+ " or\n" \
+ "$ nameif -c /etc/my_mactab_file\n" \
+#ifdef CONFIG_NC_GAPING_SECURITY_HOLE
+# define USAGE_NC_EXEC(a) a
+#else
+# define USAGE_NC_EXEC(a)
+#endif
#define nc_trivial_usage \
"[OPTIONS] [IP] [port]"
#define nc_full_usage \
"\t-l\t\tlisten mode, for inbound connects\n" \
"\t-p PORT\t\tlocal port number\n" \
"\t-i SECS\t\tdelay interval for lines sent\n" \
- "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
+ USAGE_NC_EXEC( \
+ "\t-e PROG\t\tprogram to exec after connect (dangerous!)\n" \
+ ) \
+ "\t-w SECS\t\ttimeout for connects and final net reads"
#define nc_example_usage \
"$ nc foobar.somedomain.com 25\n" \
"220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
#define netstat_trivial_usage \
"[-laenrtuwx]"
#define netstat_full_usage \
- "-l display listening server sockets\n" \
- "-a display all sockets (default: connected)\n" \
- "-e display other/more information\n" \
- "-n don't resolve names\n" \
- "-r display routing table\n" \
- "-t tcp sockets\n" \
- "-u udp sockets\n" \
- "-w raw sockets\n" \
- "-x unix sockets\n"
+ "Netstat displays Linux networking information.\n\n" \
+ "Options:\n" \
+ "\t-l display listening server sockets\n" \
+ "\t-a display all sockets (default: connected)\n" \
+ "\t-e display other/more information\n" \
+ "\t-n don't resolve names\n" \
+ "\t-r display routing table\n" \
+ "\t-t tcp sockets\n" \
+ "\t-u udp sockets\n" \
+ "\t-w raw sockets\n" \
+ "\t-x unix sockets"
+
+#define nice_trivial_usage \
+ "[-n ADJUST] [COMMAND [ARG] ...]"
+#define nice_full_usage \
+ "Nice runs a program with modified scheduling priority.\n\n" \
+ "Options:\n" \
+ "\t-n ADJUST\tAdjust the scheduling priority by ADJUST"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define od_trivial_usage \
"[-aBbcDdeFfHhIiLlOovXx] [FILE]"
#define od_full_usage \
- "Write an unambiguous representation, octal bytes by default, of FILE\n"\
+ "Write an unambiguous representation, octal bytes by default, of FILE\n" \
"to standard output. With no FILE, or when FILE is -, read standard input."
#define openvt_trivial_usage \
"openvt 2 /bin/ash\n"
#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
- #define PASSWORD_ALG_TYPES(a) a
+# define PASSWORD_ALG_TYPES(a) a
#else
- #define PASSWORD_ALG_TYPES(a)
+# define PASSWORD_ALG_TYPES(a)
#endif
#define passwd_trivial_usage \
"[OPTION] [name]"
"Change a user password. If no name is specified,\n" \
"changes the password for the current user.\n" \
"Options:\n" \
- "\t-a\tDefine which algorithm shall be used for the password.\n" \
+ "\t-a\tDefine which algorithm shall be used for the password\n" \
"\t\t\t(Choices: des, md5" \
PASSWORD_ALG_TYPES(", sha1") \
- ")\n\t-d\tDelete the password for the specified user account.\n" \
- "\t-l\tLocks (disables) the specified user account.\n" \
- "\t-u\tUnlocks (re-enables) the specified user account."
+ ")\n\t-d\tDelete the password for the specified user account\n" \
+ "\t-l\tLocks (disables) the specified user account\n" \
+ "\t-u\tUnlocks (re-enables) the specified user account"
#define patch_trivial_usage \
- "[-p<num>]"
+ "[-p<num>] [-i<patch.diff>]"
#define patch_full_usage \
- "[-p<num>]"
+ "[-p<num>]\n" \
+ "[-i<diff>]"
#define patch_example_usage \
- "$ patch -p1 <example.diff"
-
-#define pidfilehack_trivial_usage \
- "[daemon.pid] [daemon]"
-#define pidfilehack_full_usage \
- "service /var/run/daemon.pid /usr/sbin/daemon args...\n"
+ "$ patch -p1 <example.diff\n" \
+ "$ patch -p0 -i example.diff"
#define pidof_trivial_usage \
- "process-name [process-name ...]"
+ "process-name [OPTION] [process-name ...]"
#define pidof_full_usage \
- "Lists the PIDs of all processes with names that match the names on the command line"
+ "Lists the PIDs of all processes with names that match the\n" \
+ "names on the command line.\n" \
+ "Options:\n" \
+ "\t-s\t\tdisplay only a single PID"
#define pidof_example_usage \
"$ pidof init\n" \
"1\n"
#define ping_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
"Options:\n" \
- "\t-c COUNT\tSend only COUNT pings.\n" \
- "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
+ "\t-c COUNT\tSend only COUNT pings\n" \
+ "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \
"\t-q\t\tQuiet mode, only displays output at start\n" \
- "\t\t\tand when finished."
+ "\t\t\tand when finished"
#endif
#define ping_example_usage \
"$ ping localhost\n" \
#define ping6_full_usage \
"Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
"Options:\n" \
- "\t-c COUNT\tSend only COUNT pings.\n" \
- "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
+ "\t-c COUNT\tSend only COUNT pings\n" \
+ "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \
"\t-q\t\tQuiet mode, only displays output at start\n" \
- "\t\t\tand when finished."
+ "\t\t\tand when finished"
#endif
#define ping6_example_usage \
"$ ping6 ip6-localhost\n" \
"the new root file system."
#define poweroff_trivial_usage \
- ""
+ "[-d<delay>]"
#define poweroff_full_usage \
- "Halt the system and request that the kernel shut off the power."
+ "Halt the system and request that the kernel shut off the power.\n" \
+ "Options:\n" \
+ "\t-d\t\tdelay interval for shutting off"
+
+#define printenv_trivial_usage \
+ "[VARIABLES...]"
+#define printenv_full_usage \
+ "print all or part of environment\n\n" \
+ "If no environment VARIABLE specified, print them all."
#define printf_trivial_usage \
"FORMAT [ARGUMENT...]"
"Formats and prints ARGUMENT(s) according to FORMAT,\n" \
"Where FORMAT controls the output exactly as in C printf."
#define printf_example_usage \
- "$ printf "Val=%d\\n" 5\n" \
+ "$ printf \"Val=%d\\n\" 5\n" \
"Val=5\n"
+#if !defined(CONFIG_SELINUX) && !defined(CONFIG_PS_FEATURE_WIDE)
+#define USAGE_PS "\n\tThis version of ps accepts no options."
+#else
+#define USAGE_PS "\nOptions:"
+#endif
+#ifdef CONFIG_SELINUX
+#define USAGE_NONSELINUX(a)
+#else
+#define USAGE_NONSELINUX(a) a
+#endif
+#ifdef CONFIG_PS_FEATURE_WIDE
+#define USAGE_PS_WIDE(a) a
+#else
+#define USAGE_PS_WIDE(a)
+#endif
+
#define ps_trivial_usage \
""
#define ps_full_usage \
"Report process status\n" \
- USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context", "\nThis version of ps accepts no options.")
+ USAGE_PS \
+ USAGE_SELINUX("\n\t-c\tshow SE Linux context") \
+ USAGE_PS_WIDE("\n\tw\twide output")
+
#define ps_example_usage \
"$ ps\n" \
"$ pwd\n" \
"/root\n"
-#define raid_start_trivial_usage \
- "MD_DEVICE DISK_DEVICE"
-#define raid_start_full_usage \
- "Start MD_DEVICE, taking superblock from DISK_DEVICE.\n" \
- "Example: raid_start /dev/md0 /dev/sdb"
-
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage \
"Get and possibly set the system date and time from a remote HOST.\n\n" \
"Options:\n" \
- "\t-s\tSet the system date and time (default).\n" \
- "\t-p\tPrint the date and time."
+ "\t-s\tSet the system date and time (default)\n" \
+ "\t-p\tPrint the date and time"
+
+#ifdef CONFIG_FEATURE_READLINK_FOLLOW
+#define USAGE_READLINK_FOLLOW(a) a
+#else
+#define USAGE_READLINK_FOLLOW(a)
+#endif
#define readlink_trivial_usage \
- ""
+ USAGE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
- "Read a symbolic link."
+ "Displays the value of a symbolic link." \
+ USAGE_READLINK_FOLLOW("\n\nOptions:\n" \
+ "\t-f\tcanonicalize by following all symlinks")
+
+#define readprofile_trivial_usage \
+ "[OPTIONS]..."
+#define readprofile_full_usage \
+ "Options:\n" \
+ "\t -m <mapfile> (default: /boot/System.map)\n" \
+ "\t -p <profile> (default: /proc/profile)\n" \
+ "\t -M <mult> set the profiling multiplier to <mult>\n" \
+ "\t -i print only info about the sampling step\n" \
+ "\t -v print verbose data\n" \
+ "\t -a print all symbols, even if count is 0\n" \
+ "\t -b print individual histogram-bin counts\n" \
+ "\t -s print individual counters within functions\n" \
+ "\t -r reset all the counters (root only)\n" \
+ "\t -n disable byte order auto-detection"
#define realpath_trivial_usage \
"pathname ..."
#define realpath_full_usage \
- "return the canonicalized absolute pathnames of given arguments\n\n"
+ "Returns the absolute pathnames of given argument."
#define reboot_trivial_usage \
- ""
+ "[-d<delay>]"
#define reboot_full_usage \
- "Reboot the system."
+ "Reboot the system.\n" \
+ "Options:\n" \
+ "\t-d\t\tdelay interval for rebooting"
#define renice_trivial_usage \
- "priority pid [pid ...]"
+ "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
- "Changes priority of running processes. Allowed priorities range\n" \
- "from 20 (the process runs only when nothing else is running) to 0\n" \
- "(default priority) to -20 (almost nothing else ever gets to run)."
+ "Changes priority of running processes.\n\n" \
+ "Options:\n" \
+ "\t-n\tadjusts current nice value (smaller is faster)\n" \
+ "\t-p\tprocess id(s) (default)\n" \
+ "\t-g\tprocess group id(s)\n" \
+ "\t-u\tprocess user name(s) and/or id(s)"
#define reset_trivial_usage \
""
#define rmmod_example_usage \
"$ rmmod tulip\n"
+#ifdef CONFIG_FEATURE_IPV6
+# define USAGE_ROUTE_IPV6(a) a
+#else
+# define USAGE_ROUTE_IPV6(a) "\t"
+#endif
+
+
#define route_trivial_usage \
- "[{add|del|flush}]"
+ "[{add|del|delete}]"
#define route_full_usage \
"Edit the kernel's routing tables.\n\n" \
"Options:\n" \
- "\t-n\tDont resolve names.\n" \
- "\t-e\tDisplay other/more information"
+ "\t-n\t\tDont resolve names\n" \
+ "\t-e\t\tDisplay other/more information\n" \
+ "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family"
#define rpm_trivial_usage \
"-i -q[ildc]p package.rpm"
#define run_parts_full_usage \
"Run a bunch of scripts in a directory.\n\n" \
"Options:\n" \
- "\t-t\t\tTest only what file will be executed, without execute them.\n" \
- "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
- "\t-u MASK\tSet the umask to MASK before executing every program."
+ "\t-t\tPrints what would be run, but does not actually run anything\n" \
+ "\t-a ARG\tPass ARG as an argument for every program invoked\n" \
+ "\t-u MASK\tSet the umask to MASK before executing every program"
#define rx_trivial_usage \
"FILE"
"$ rx /tmp/foo\n"
#define sed_trivial_usage \
- "[-nef] pattern [files...]"
+ "[-efinr] pattern [files...]"
#define sed_full_usage \
"Options:\n" \
- "\t-n\t\tsuppress automatic printing of pattern space\n" \
"\t-e script\tadd the script to the commands to be executed\n" \
- "\t-f scriptfile\tadd the contents of script-file to the commands to be executed\n" \
+ "\t-f scriptfile\tadd script-file contents to the\n" \
+ "\t\t\tcommands to be executed\n" \
+ "\t-i\t\tedit files in-place\n" \
+ "\t-n\t\tsuppress automatic printing of pattern space\n" \
+ "\t-r\t\tuse extended regular expression syntax\n" \
"\n" \
- "If no -e or -f is given, the first non-option argument is taken as the\n" \
- "sed script to interpret. All remaining arguments are names of input\n" \
- "files; if no input files are specified, then the standard input is read."
+ "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
+ "script to interpret. All remaining arguments are names of input files; if no\n" \
+ "input files are specified, then the standard input is read. Source files\n" \
+ "will not be modified unless -i option is given."
+
#define sed_example_usage \
- "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
+ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
#define seq_trivial_usage \
"Arguments:\n" \
"\tLAST\n" \
"\tFIRST\tLAST\n" \
- "\tFIRST\tINCREMENT\tLAST\n"
+ "\tFIRST\tINCREMENT\tLAST"
+
+#define setconsole_trivial_usage \
+ "[-r|--reset] [DEVICE]"
+#define setconsole_full_usage \
+ "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \
+ "Options:\n" \
+ "\t-r\tReset output to /dev/console."
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define setkeycodes_example_usage \
"$ setkeycodes e030 127\n"
+#define setsid_trivial_usage \
+ "program [arg ...]"
+#define setsid_full_usage \
+ "Runs any program in a new session by calling setsid() before\n" \
+ "exec'ing the rest of its arguments. See setsid(2) for details."
+
#define lash_trivial_usage \
"[FILE]...\n" \
"or: sh -c command [args]..."
#define lash_full_usage \
"The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
-"This command does not yet have proper documentation.\n" \
-"\n" \
-"Use lash just as you would use any other shell. It properly handles pipes,\n" \
-"redirects, job control, can be used as the shell for scripts, and has a\n" \
-"sufficient set of builtins to do what is needed. It does not (yet) support\n" \
-"Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
-"use ash or bash. If you just need a very simple and extremely small shell,\n" \
-"this will do the job."
+ "This command does not yet have proper documentation.\n\n" \
+ "Use lash just as you would use any other shell. It properly handles pipes,\n" \
+ "redirects, job control, can be used as the shell for scripts, and has a\n" \
+ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
+ "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
+ "use ash or bash. If you just need a very simple and extremely small shell,\n" \
+ "this will do the job."
#define last_trivial_usage \
""
"\t-w\twarn about improperly formated SHA1 checksum lines")
#ifdef CONFIG_FEATURE_FANCY_SLEEP
- #define USAGE_FANCY_SLEEP(a) a
- #define USAGE_NOT_FANCY_SLEEP(a)
+# define USAGE_FANCY_SLEEP(a) a
+# define USAGE_NOT_FANCY_SLEEP(a)
#else
- #define USAGE_FANCY_SLEEP(a)
- #define USAGE_NOT_FANCY_SLEEP(a) a
+# define USAGE_FANCY_SLEEP(a)
+# define USAGE_NOT_FANCY_SLEEP(a) a
#endif
#define sleep_trivial_usage \
#define sleep_full_usage \
USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
USAGE_FANCY_SLEEP( \
-"Pause for a time equal to the total of the args given, where each arg can\n" \
-"have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
+ "Pause for a time equal to the total of the args given, where each arg can\n" \
+ "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
"[98528 second delay results]\n")
-#ifdef CONFIG_FEATURE_SORT_UNIQUE
- #define USAGE_SORT_UNIQUE(a) a
+#ifdef CONFIG_SORT_BIG
+# define USAGE_SORT_BIG(a) a
#else
- #define USAGE_SORT_UNIQUE(a)
-#endif
-#ifdef CONFIG_FEATURE_SORT_REVERSE
- #define USAGE_SORT_REVERSE(a) a
-#else
- #define USAGE_SORT_REVERSE(a)
+# define USAGE_SORT_BIG(a)
#endif
+
#define sort_trivial_usage \
- "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
+ "[-nru" USAGE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") "] [FILE]..."
#define sort_full_usage \
- "Sorts lines of text in the specified files\n\n"\
- "Options:\n" \
- USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
- USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
- "\t-n\tsort numerics"
+ "Sorts lines of text in the specified files\n\n" \
+ "Options:\n" \
+ USAGE_SORT_BIG( \
+ "\t-b\tignore leading blanks\n" \
+ "\t-c\tcheck whether input is sorted\n" \
+ "\t-d\tdictionary order (blank or alphanumeric only)\n" \
+ "\t-f\tignore case\n" \
+ "\t-g\tgeneral numerical sort\n" \
+ "\t-i\tignore unprintable characters\n" \
+ "\t-k\tspecify sort key\n" \
+ "\t-M\tsort month\n" \
+ ) \
+ "\t-n\tsort numbers\n" \
+ USAGE_SORT_BIG( \
+ "\t-o\toutput to file\n" \
+ "\t-k\tsort by key\n" \
+ "\t-t\tuse key separator other than whitespace\n" \
+ ) \
+ "\t-r\treverse sort order\n" \
+ USAGE_SORT_BIG("\t-s\tstable (don't sort ties alphabetically)\n") \
+ "\t-u\tsuppress duplicate lines" \
+ USAGE_SORT_BIG("\n\t-z\tinput terminated by nulls, not newlines\n") \
+ USAGE_SORT_BIG("\t-mST\tignored for GNU compatability") \
+ ""
#define sort_example_usage \
"$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
"a\n" \
"c\n" \
"d\n" \
"e\n" \
- "f\n"
+ "f\n" \
+ USAGE_SORT_BIG( \
+ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
+ "d 2\n" \
+ "b 2\n" \
+ "c 3\n" \
+ ) \
+ ""
#define start_stop_daemon_trivial_usage \
- "[OPTIONS]"
+ "[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
- "Program to start and stop services.\n"\
- "Options:\n" \
- "-S\t\t\tstart\n"\
- "-K\t\t\tstop\n"\
- "-b\t\t\tforce process into background (daemonize)\n"\
- "-x <executable>\t\tprogram to start/check if it is running\n"\
- "-u <username>|<uid>\tstop this user's processes\n"\
- "-n <process-name>\tstop processes with this name\n"\
- "-s <signal>\t\tsignal to send (default 15)\n"\
- "-a <pathname>\t\tprogram to start (default <executable>)\n"
+ "Program to start and stop services." \
+ "\n\nOptions:" \
+ "\n\t-S|--start\t\t\tstart" \
+ "\n\t-K|--stop\t\t\tstop" \
+ "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname" \
+ "\n\t-b|--background\t\t\tforce process into background" \
+ "\n\t-u|--user <username>|<uid>\tstop this user's processes" \
+ "\n\t-x|--exec <executable>\t\tprogram to either start or check" \
+ "\n\t-m|--make-pidfile <filename>\tcreate the -p file and enter pid in it" \
+ "\n\t-n|--name <process-name>\tstop processes with this name" \
+ "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file" \
+ "\n\t-q|--quiet\t\t\tbe quiet" \
+ "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
+
+#ifdef CONFIG_FEATURE_STAT_FORMAT
+# define USAGE_STAT_FORMAT(a) a
+#else
+# define USAGE_STAT_FORMAT(a)
+#endif
+#define stat_trivial_usage \
+ "[OPTION] FILE..."
+#define stat_full_usage \
+ "display file (default) or filesystem status.\n\n" \
+ "Options:\n" \
+ USAGE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \
+ "\t-f\tdisplay filesystem status\n" \
+ "\t-L,-l\tdereference links\n" \
+ "\t-t\tdisplay info in terse form\n" \
+ USAGE_STAT_FORMAT( \
+ "\nValid format sequences for files:\n" \
+ " %a Access rights in octal\n" \
+ " %A Access rights in human readable form\n" \
+ " %b Number of blocks allocated (see %B)\n" \
+ " %B The size in bytes of each block reported by %b\n" \
+ " %d Device number in decimal\n" \
+ " %D Device number in hex\n" \
+ " %f Raw mode in hex\n" \
+ " %F File type\n" \
+ " %g Group ID of owner\n" \
+ " %G Group name of owner\n" \
+ " %h Number of hard links\n" \
+ " %i Inode number\n" \
+ " %n File name\n" \
+ " %N Quoted file name with dereference if symbolic link\n" \
+ " %o I/O block size\n" \
+ " %s Total size, in bytes\n" \
+ " %t Major device type in hex\n" \
+ " %T Minor device type in hex\n" \
+ " %u User ID of owner\n" \
+ " %U User name of owner\n" \
+ " %x Time of last access\n" \
+ " %X Time of last access as seconds since Epoch\n" \
+ " %y Time of last modification\n" \
+ " %Y Time of last modification as seconds since Epoch\n" \
+ " %z Time of last change\n" \
+ " %Z Time of last change as seconds since Epoch\n" \
+ "\nValid format sequences for file systems:\n" \
+ " %a Free blocks available to non-superuser\n" \
+ " %b Total data blocks in file system\n" \
+ " %c Total file nodes in file system\n" \
+ " %d Free file nodes in file system\n" \
+ " %f Free blocks in file system\n" \
+ " %i File System ID in hex\n" \
+ " %l Maximum length of filenames\n" \
+ " %n File name\n" \
+ " %s Block size (for faster transfers)\n" \
+ " %S Fundamental block size (for block counts)\n" \
+ " %t Type in hex\n" \
+ " %T Type in human readable form\n" \
+ )
#define strings_trivial_usage \
- "[-afo] [-n length] [file ... ]"
+ "[-afo] [-n length] [file ... ]"
#define strings_full_usage \
- "Display printable strings in a binary file." \
- "\n\nOptions:" \
- "\n\t-f\tPrecede each string with the name of the file where it was found." \
- "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
- "\n\t-o\tEach string is preceded by its decimal offset in the file."
+ "Display printable strings in a binary file." \
+ "\n\nOptions:" \
+ "\n\t-a\tScan the whole files (this is the default)." \
+ "\n\t-f\tPrecede each string with the name of the file where it was found." \
+ "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
+ "\n\t-o\tEach string is preceded by its decimal offset in the file"
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
"Single user login\n" \
"Options:\n" \
"\t-f\tDo not authenticate (user already authenticated)\n" \
- "\t-h\tName of the remote host for this login.\n" \
- "\t-p\tPreserve environment."
+ "\t-h\tName of the remote host for this login\n" \
+ "\t-p\tPreserve environment"
+
+#define sum_trivial_usage \
+ "[rs] [files...]"
+#define sum_full_usage \
+ "checksum and count the blocks in a file\n\n" \
+ "Options:\n" \
+ "\t-r\tuse BSD sum algorithm (1K blocks)\n" \
+ "\t-s\tuse System V sum algorithm (512byte blocks)"
#define swapoff_trivial_usage \
- "[OPTION] [DEVICE]"
+ "[-a] [DEVICE]"
#define swapoff_full_usage \
"Stop swapping virtual memory pages on DEVICE.\n\n" \
"Options:\n" \
"\t-a\tStop swapping on all swap devices"
#define swapon_trivial_usage \
- "[OPTION] [DEVICE]"
+ "[-a] [DEVICE]"
#define swapon_full_usage \
"Start swapping virtual memory pages on DEVICE.\n\n" \
"Options:\n" \
#ifdef CONFIG_FEATURE_ROTATE_LOGFILE
- #define USAGE_ROTATE_LOGFILE(a) a
+# define USAGE_ROTATE_LOGFILE(a) a
#else
- #define USAGE_ROTATE_LOGFILE(a)
+# define USAGE_ROTATE_LOGFILE(a)
#endif
#ifdef CONFIG_FEATURE_REMOTE_LOG
- #define USAGE_REMOTE_LOG(a) a
+# define USAGE_REMOTE_LOG(a) a
#else
- #define USAGE_REMOTE_LOG(a)
+# define USAGE_REMOTE_LOG(a)
#endif
#ifdef CONFIG_FEATURE_IPC_SYSLOG
- #define USAGE_IPC_LOG(a) a
+# define USAGE_IPC_LOG(a) a
#else
- #define USAGE_IPC_LOG(a)
+# define USAGE_IPC_LOG(a)
#endif
-#ifdef CONFIG_SYSCTL
#define sysctl_trivial_usage \
- "[OPTIONS]... [VALUE]...\n"
-#define sysctl_full_usage
- "sysctl - configure kernel parameters at runtime\n\n" \
- "Options:\n" \
- "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
- "\t-e\tUse this option to ignore errors about unknown keys.\n" \
- "\t-w\tUse this option when you want to change a sysctl setting.\n" \
- "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
- "\t-a\tDisplay all values currently available.\n" \
- "\t-A\tDisplay all values currently available in table form."
-
-#define sysctl_example_usage
- "sysctl [-n] [-e] variable ...\n" \
- "sysctl [-n] [-e] -w variable=value ...\n" \
- "sysctl [-n] [-e] -a\n" \
- "sysctl [-n] [-e] -p <file>\t(default /etc/sysctl.conf)\n" \
- "sysctl [-n] [-e] -A\n"
-#endif
+ "[OPTIONS]... [VALUE]..."
+#define sysctl_full_usage \
+ "configure kernel parameters at runtime\n\n" \
+ "Options:\n" \
+ "\t-n\tUse this option to disable printing of the key name when printing values\n" \
+ "\t-w\tUse this option when you want to change a sysctl setting\n" \
+ "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
+ "\t-a\tDisplay all values currently available\n" \
+ "\t-A\tDisplay all values currently available in table form"
+#define sysctl_example_usage \
+ "sysctl [-n] variable ...\n" \
+ "sysctl [-n] -w variable=value ...\n" \
+ "sysctl [-n] -a\n" \
+ "sysctl [-n] -p <file>\t(default /etc/sysctl.conf)\n" \
+ "sysctl [-n] -A\n"
#define syslogd_trivial_usage \
"[OPTION]..."
"Linux system and kernel logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
"Options:\n" \
- "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
+ "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
"\t-n\t\tRun as a foreground process\n" \
- "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
+ "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \
+ "\t-S\t\tMake logging output smaller." \
USAGE_ROTATE_LOGFILE( \
- "\n\t-s SIZE\t\tMax size (KB) bevor rotate (default=200KB, 0=off)\n" \
- "\t-b NUM\t\tNumber of rotated log files (default=1, 0=purge log)") \
+ "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
+ "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
USAGE_REMOTE_LOG( \
"\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
"\t-L\t\tLog locally and via network logging (default is network only)") \
#ifndef CONFIG_FEATURE_FANCY_TAIL
- #define USAGE_UNSIMPLE_TAIL(a)
+# define USAGE_UNSIMPLE_TAIL(a)
#else
- #define USAGE_UNSIMPLE_TAIL(a) a
+# define USAGE_UNSIMPLE_TAIL(a) a
#endif
#define tail_trivial_usage \
"[OPTION]... [FILE]..."
"nameserver 10.0.0.1\n"
#ifdef CONFIG_FEATURE_TAR_CREATE
- #define USAGE_TAR_CREATE(a) a
+# define USAGE_TAR_CREATE(a) a
#else
- #define USAGE_TAR_CREATE(a)
+# define USAGE_TAR_CREATE(a)
#endif
#ifdef CONFIG_FEATURE_TAR_EXCLUDE
- #define USAGE_TAR_EXCLUDE(a) a
+# define USAGE_TAR_EXCLUDE(a) a
#else
- #define USAGE_TAR_EXCLUDE(a)
+# define USAGE_TAR_EXCLUDE(a)
#endif
#ifdef CONFIG_FEATURE_TAR_GZIP
- #define USAGE_TAR_GZIP(a) a
+# define USAGE_TAR_GZIP(a) a
#else
- #define USAGE_TAR_GZIP(a)
+# define USAGE_TAR_GZIP(a)
#endif
#ifdef CONFIG_FEATURE_TAR_BZIP2
- #define USAGE_TAR_BZIP2(a) a
+# define USAGE_TAR_BZIP2(a) a
#else
- #define USAGE_TAR_BZIP2(a)
+# define USAGE_TAR_BZIP2(a)
#endif
#ifdef CONFIG_FEATURE_TAR_COMPRESS
- #define USAGE_TAR_COMPRESS(a) a
+# define USAGE_TAR_COMPRESS(a) a
#else
- #define USAGE_TAR_COMPRESS(a)
+# define USAGE_TAR_COMPRESS(a)
#endif
#define tar_trivial_usage \
"\t-a\tappend to the given FILEs, do not overwrite\n" \
"\t-i\tignore interrupt signals (SIGINT)"
#define tee_example_usage \
- "$ echo "Hello" | tee /tmp/foo\n" \
+ "$ echo \"Hello\" | tee /tmp/foo\n" \
"$ cat /tmp/foo\n" \
"Hello\n"
+#ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
+#define telnet_trivial_usage \
+ "[-a] [-l USER] HOST [PORT]"
+#define telnet_full_usage \
+ "Telnet is used to establish interactive communication with another\n" \
+ "computer over a network using the TELNET protocol.\n\n" \
+ "Options:\n" \
+ "\t-a\t\tAttempt an automatic login with the USER variable\n" \
+ "\t-l USER\t\tAttempt an automatic login with the USER argument\n" \
+ "\tHOST\t\tThe official name, alias or the IP address of the\n" \
+ "\t\t\tremote host.\n" \
+ "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
+ "\t\t\tspecified, the default telnet (23) port is used."
+#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage \
- "Telnet is used to establish interactive communication with another\n"\
+ "Telnet is used to establish interactive communication with another\n" \
"computer over a network using the TELNET protocol."
+#endif
#ifdef CONFIG_FEATURE_TELNETD_INETD
#define telnetd_trivial_usage \
"(inetd mode) [OPTION]"
#define telnetd_full_usage \
- "Telnetd uses incoming TELNET connections via inetd.\n"\
+ "Telnetd uses incoming TELNET connections via inetd.\n" \
"Options:\n" \
- "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
+ "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
+ "\t-f issue_file\tDisplay issue_file instead of /etc/issue"
#else
#define telnetd_trivial_usage \
"[OPTION]"
#define telnetd_full_usage \
- "Telnetd listens for incoming TELNET connections on PORT.\n"\
+ "Telnetd listens for incoming TELNET connections on PORT.\n" \
"Options:\n" \
- "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
- "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
+ "\t-p PORT\tlisten for connections on PORT (default 23)\n" \
+ "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
+ "\t-f issue_file\tDisplay issue_file instead of /etc/issue"
#endif
#define test_trivial_usage \
"$ echo $?\n" \
"1\n" \
"$ test 1 -eq 1\n" \
- "$ echo $? \n" \
+ "$ echo $?\n" \
"0\n" \
"$ [ -d /etc ]\n" \
"$ echo $?\n" \
"1\n"
#ifdef CONFIG_FEATURE_TFTP_GET
- #define USAGE_TFTP_GET(a) a
+# define USAGE_TFTP_GET(a) a
#else
- #define USAGE_TFTP_GET(a)
+# define USAGE_TFTP_GET(a)
#endif
#ifdef CONFIG_FEATURE_TFTP_PUT
- #define USAGE_TFTP_PUT(a) a
+# define USAGE_TFTP_PUT(a) a
#else
- #define USAGE_TFTP_PUT(a)
+# define USAGE_TFTP_PUT(a)
#endif
#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
- #define USAGE_TFTP_BS(a) a
+# define USAGE_TFTP_BS(a) a
#else
- #define USAGE_TFTP_BS(a)
+# define USAGE_TFTP_BS(a)
#endif
#define tftp_trivial_usage \
#define tftp_full_usage \
"Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
"Options:\n" \
- "\t-l FILE\tLocal FILE.\n" \
- "\t-r FILE\tRemote FILE.\n" \
- USAGE_TFTP_GET( \
- "\t-g\tGet file.\n" \
- ) \
- USAGE_TFTP_PUT( \
- "\t-p\tPut file.\n" \
+ "\t-l FILE\tLocal FILE\n" \
+ "\t-r FILE\tRemote FILE" \
+ USAGE_TFTP_GET( \
+ "\n\t-g\tGet file" \
+ ) \
+ USAGE_TFTP_PUT( \
+ "\n\t-p\tPut file" \
) \
USAGE_TFTP_BS( \
- "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
+ "\n\t-b SIZE\tTransfer blocks of SIZE octets" \
)
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
"Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
"COMMAND's resource usage information is displayed\n\n" \
"Options:\n" \
- "\t-v\tDisplays verbose resource usage information."
+ "\t-v\tDisplays verbose resource usage information"
#define top_trivial_usage \
"[-d <seconds>]"
"\t-d\tdelete input characters coded STRING1\n" \
"\t-s\tsqueeze multiple output characters of STRING2 into one character"
#define tr_example_usage \
- "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
+ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
"hello world\n"
#define traceroute_trivial_usage \
- "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\
- [-s src_addr] [-t tos] [-w wait] host [data size]"
+ "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
+ "\t[-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
+ "\t[-z pausemsecs] host [data size]"
#define traceroute_full_usage \
"trace the route ip packets follow going to \"host\"\n" \
"Options:\n" \
- "\t-d\tset SO_DEBUG options to socket\n" \
+ "\t-F\tSet the don't fragment bit\n" \
+ "\t-I\tUse ICMP ECHO instead of UDP datagrams\n" \
+ "\t-l\tDisplay the ttl value of the returned packet\n" \
+ "\t-d\tSet SO_DEBUG options to socket\n" \
"\t-n\tPrint hop addresses numerically rather than symbolically\n" \
"\t-r\tBypass the normal routing tables and send directly to a host\n" \
"\t-v\tVerbose output\n" \
"\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
"\t\t(default 0)\n" \
"\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
- "\t\t(default 3 sec.)."
+ "\t\t(default 3 sec.)\n" \
+ "\t-g\tSpecify a loose source route gateway (8 maximum)"
#define true_trivial_usage \
#define tty_trivial_usage \
""
#define tty_full_usage \
- "Print the file name of the terminal connected to standard input.\n\n"\
+ "Print the file name of the terminal connected to standard input.\n\n" \
"Options:\n" \
"\t-s\tprint nothing, only return an exit status"
#define tty_example_usage \
"$ tty\n" \
"/dev/tty2\n"
+#define tune2fs_trivial_usage \
+ "[-c max-mounts-count] [-e errors-behavior] [-g group] " \
+ "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
+ "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \
+ "[-r reserved-blocks-count] [-u user] [-C mount-count] " \
+ "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
+ "[-T last-check-time] [-U UUID] device"
+#define tune2fs_full_usage \
+ "Adjust filesystem options on ext[23] filesystems.\n\n"
+
#define udhcpc_trivial_usage \
- "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
+ "[-Cfbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
#define udhcpc_full_usage \
- "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
+ "\t-c,\t--clientid=CLIENTID\tSet client identifier\n" \
+ "\t-C,\t--clientid-none\tSuppress default client identifier\n" \
"\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
"\t-h,\t \tAlias for -H\n" \
"\t-f,\t--foreground\tDo not fork after getting lease\n" \
- "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
+ "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated\n" \
"\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
- "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
+ "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated\n" \
"\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
"\t-q,\t--quit\tQuit after obtaining lease\n" \
"\t-r,\t--request=IP\tIP address to request (default: none)\n" \
""
#ifdef CONFIG_FEATURE_MOUNT_FORCE
- #define USAGE_MOUNT_FORCE(a) a
+# define USAGE_MOUNT_FORCE(a) a
#else
- #define USAGE_MOUNT_FORCE(a)
+# define USAGE_MOUNT_FORCE(a)
#endif
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
"Uncompress .Z file[s]\n" \
"Options:\n" \
"\t-c\textract to stdout\n" \
- "\t-f\tforce overwrite an existing file\n"
+ "\t-f\tforce overwrite an existing file"
#define uniq_trivial_usage \
- "[OPTION]... [INPUT [OUTPUT]]"
+ "[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Discard all but one of successive identical lines from INPUT\n" \
"(or standard input), writing to OUTPUT (or standard output).\n\n" \
#define vconfig_trivial_usage \
"COMMAND [OPTIONS] ..."
-
#define vconfig_full_usage \
-"Usage: add [interface-name] [vlan_id] \n" \
-" rem [vlan-name] \n" \
-" set_flag [interface-name] [flag-num] [0 | 1] \n" \
-" set_egress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
-" set_ingress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
-" set_name_type [name-type] \n"
+ "vconfig lets you create and remove virtual ethernet devices.\n\n" \
+ "Options:\n" \
+ "\tadd [interface-name] [vlan_id]\n" \
+ "\trem [vlan-name]\n" \
+ "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
+ "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_name_type [name-type]"
#define vi_trivial_usage \
"[OPTION] [FILE]..."
#define vi_full_usage \
"edit FILE.\n\n" \
"Options:\n" \
- "\t-R\tRead-only- do not write to the file."
+ "\t-R\tRead-only- do not write to the file"
#define vlock_trivial_usage \
"[OPTIONS]"
#define watch_full_usage \
"Executes a program periodically.\n" \
"Options:\n" \
- "\t-n\tLoop period in seconds - default is 2."
+ "\t-n\tLoop period in seconds - default is 2"
#define watch_example_usage \
"$ watch date\n" \
"Mon Dec 17 10:31:40 GMT 2000\n" \
#define watchdog_full_usage \
"Periodically write to watchdog device DEV.\n" \
"Options:\n" \
- "\t-t\tTimer period in seconds - default is 30."
+ "\t-t\tTimer period in seconds - default is 30"
#define wc_trivial_usage \
"[OPTION]... [FILE]..."
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
+ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
#define wget_full_usage \
"wget retrieves files via HTTP or FTP\n\n" \
"Options:\n" \
"/bin/login\n"
#define who_trivial_usage \
- " "
+ " "
#define who_full_usage \
- "Prints the current user names and related information"
+ "Prints the current user names and related information"
#define whoami_trivial_usage \
""
"\t-r\tDo not run command for empty readed lines\n" \
USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
- "\t-t\tPrint the command line on stderr before executing it."
+ "\t-t\tPrint the command line on stderr before executing it"
#define xargs_example_usage \
"$ ls | xargs gzip\n" \
"$ find . -name '*.c' -print | xargs rm\n"
"FILE"
#define zcat_full_usage \
"Uncompress to stdout."
+
+#define zcip_trivial_usage \
+ "[OPTIONS] ifname script"
+#define zcip_full_usage \
+ "zcip manages a ZeroConf IPv4 link-local address.\n" \
+ "Options:\n" \
+ "\t-f foreground mode\n" \
+ "\t-q quit after address (no daemon)\n" \
+ "\t-r 169.254.x.x request this address first\n" \
+ "\t-v verbose; show version\n"
+
+#endif /* __BB_USAGE_H__ */