#define deallocvt_trivial_usage \
"[N]"
#define deallocvt_full_usage \
- "Deallocate unused virtual terminal /dev/ttyN"
+ "Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
"GROUP"
#define delgroup_full_usage \
- "Deletes group GROUP from the system"
+ "Deletes group GROUP from the system"
#define deluser_trivial_usage \
"USER"
#define deluser_full_usage \
- "Deletes user USER from the system"
+ "Deletes user USER from the system"
#define devfsd_trivial_usage \
"mntpnt [-v]" \
"\t-H login_host\tLog login_host into the utmp file as the hostname"
#define grep_trivial_usage \
- "[-ihHnqvs" \
+ "[-ihHnqvso" \
USE_FEATURE_GREP_EGREP_ALIAS("E") \
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
"\t-s\tsuppress file open/read error messages\n" \
"\t-c\tonly print count of matching lines\n" \
"\t-f\tread PATTERN from file\n" \
+ "\t-o\tshow only the part of a line that matches PATTERN\n" \
"\t-e\tPATTERN is a regular expression\n" \
"\t-F\tPATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS("\n\t-E\tPATTERN is an extended regular expression") \
"\t-u\tthe hardware clock is kept in coordinated universal time\n" \
"\t-l\tthe hardware clock is kept in local time"
-#ifdef CONFIG_SELINUX
-# define USAGE_SELINUX(a) a
-#else
-# define USAGE_SELINUX(a)
-#endif
-
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
#define id_full_usage \
"Print information for USERNAME or the current user\n\n" \
"Options:\n" \
- USAGE_SELINUX("\t-c\tprints only the security context\n") \
+ USE_SELINUX("\t-c\tprints only the security context\n") \
"\t-g\tprints only the group ID\n" \
"\t-u\tprints only the user ID\n" \
"\t-n\tprint a name instead of a number\n" \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
-#ifdef CONFIG_FEATURE_IFCONFIG_SLIP
-# define USAGE_SIOCSKEEPALIVE(a) a
-#else
-# define USAGE_SIOCSKEEPALIVE(a)
-#endif
-#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
-# define USAGE_IFCONFIG_MII(a) a
-#else
-# define USAGE_IFCONFIG_MII(a)
-#endif
-#ifdef CONFIG_FEATURE_IFCONFIG_HW
-# define USAGE_IFCONFIG_HW(a) a
-#else
-# define USAGE_IFCONFIG_HW(a)
-#endif
-#ifdef CONFIG_FEATURE_IFCONFIG_STATUS
-# define USAGE_IFCONFIG_OPT_A(a) a
-#else
-# define USAGE_IFCONFIG_OPT_A(a)
-#endif
-#ifdef CONFIG_FEATURE_IPV6
-# define USAGE_IPV6(a) a
-#else
-# define USAGE_IPV6(a)
-#endif
-
#define ifconfig_trivial_usage \
- USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
+ USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
"configure a network interface\n\n" \
"Options:\n" \
- USAGE_IPV6("\t[add <address>[/<prefixlen>]]\n") \
- USAGE_IPV6("\t[del <address>[/<prefixlen>]]\n") \
+ USE_FEATURE_IPV6("\t[add <address>[/<prefixlen>]]\n") \
+ USE_FEATURE_IPV6("\t[del <address>[/<prefixlen>]]\n") \
"\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
"\t[netmask <address>] [dstaddr <address>]\n" \
- USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
- "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
+ USE_FEATURE_IFCONFIG_SLIP("\t[outfill <NN>] [keepalive <NN>]\n") \
+ "\t" USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") \
"[metric <NN>] [mtu <NN>]\n" \
"\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
"\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
- USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
+ USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
"\t[up|down] ..."
#define ifup_trivial_usage \
" ::shutdown:/bin/umount -a -r\n" \
" ::shutdown:/sbin/swapoff -a\n"
-#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
-# define USAGE_INSMOD_MAP(a) a
-#else
-# define USAGE_INSMOD_MAP(a)
-#endif
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
"\t-v\tverbose output\n" \
"\t-q\tquiet output\n" \
"\t-L\tLock to prevent simultaneous loads of a module\n" \
- USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
+ USE_FEATURE_INSMOD_LOAD_MAP("\t-m\tOutput load map to stdout\n") \
"\t-o NAME\tSet internal module name to NAME\n" \
"\t-x\tdo not export externs"
"\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
"\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
-#ifdef CONFIG_FEATURE_IPCALC_FANCY
-# define XUSAGE_IPCALC_FANCY(a) a
-#else
-# define XUSAGE_IPCALC_FANCY(a)
-#endif
#define ipcalc_trivial_usage \
"[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
"\t-b\t--broadcast\tDisplay calculated broadcast address\n" \
"\t-n\t--network\tDisplay calculated network address\n" \
"\t-m\t--netmask\tDisplay default netmask for IP" \
- XUSAGE_IPCALC_FANCY( \
+ USE_FEATURE_IPCALC_FANCY( \
"\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK\n" \
"\t-h\t--hostname\tDisplay first resolved host name\n" \
"\t-s\t--silent\tDon't ever display error messages")
"\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
#define kill_trivial_usage \
- "[-signal] process-id [process-id ...]"
+ "[-l] [-signal] process-id [process-id ...]"
#define kill_full_usage \
- "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \
+ "Send a signal (default is TERM) to the specified process(es).\n\n" \
"Options:\n" \
"\t-l\tList all signal names and numbers"
#define kill_example_usage \
"$ kill 252\n"
#define killall_trivial_usage \
- "[-q] [-signal] process-name [process-name ...]"
+ "[-l] [-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
- "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \
+ "Send a signal (default is TERM) to the specified process(es).\n\n" \
"Options:\n" \
"\t-l\tList all signal names and numbers\n" \
"\t-q\tDo not complain if no processes were killed"
#define killall_example_usage \
"$ killall apache\n"
+#define killall5_trivial_usage \
+ "[-l] [-signal]"
+#define killall5_full_usage \
+ "Send a signal (default is TERM) to all processes outside current session.\n\n" \
+ "Options:\n" \
+ "\t-l\tList all signal names and numbers\n" \
+
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
"\t-f\t\toutput data as the log grows"
#define losetup_trivial_usage \
- "[-od] LOOPDEVICE [FILE]"
+ "[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define losetup_full_usage \
- "Associate LOOPDEVICE with FILE, or display current association.\n\n" \
+ "(Dis)associate LOOPDEVICE with FILE, or display current associations.\n\n" \
"Options:\n" \
"\t-d\t\tDisassociate LOOPDEVICE\n" \
"\t-o OFFSET\tStart OFFSET bytes into FILE"
#define losetup_notes_usage \
+ "No arguments will display all current associations.\n" \
"One argument (losetup /dev/loop1) will display the current association\n" \
"(if any), or disassociate it (with -d). The display shows the offset\n" \
"and filename of the file the loop device is currently bound to.\n\n" \
"Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
"with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
-#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
-# define USAGE_LS_TIMESTAMPS(a) a
-#else
-# define USAGE_LS_TIMESTAMPS(a)
-#endif
-#ifdef CONFIG_FEATURE_LS_FILETYPES
-# define USAGE_LS_FILETYPES(a) a
-#else
-# define USAGE_LS_FILETYPES(a)
-#endif
-#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
-# define USAGE_LS_FOLLOWLINKS(a) a
-#else
-# define USAGE_LS_FOLLOWLINKS(a)
-#endif
-#ifdef CONFIG_FEATURE_LS_RECURSIVE
-# define USAGE_LS_RECURSIVE(a) a
-#else
-# define USAGE_LS_RECURSIVE(a)
-#endif
-#ifdef CONFIG_FEATURE_LS_SORTFILES
-# define USAGE_LS_SORTFILES(a) a
-#else
-# define USAGE_LS_SORTFILES(a)
-#endif
-#ifdef CONFIG_FEATURE_AUTOWIDTH
-# define USAGE_AUTOWIDTH(a) a
-#else
-# define USAGE_AUTOWIDTH(a)
-#endif
-#ifdef CONFIG_FEATURE_LS_COLOR
- #define USAGE_LS_COLOR(a) a
-#else
- #define USAGE_LS_COLOR(a)
-#endif
-
#define ls_trivial_usage \
- "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" USAGE_SELINUX("K") "] [filenames...]"
+ "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
+ USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
+ USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
+ USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
+ USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
+ USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \
+ USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
+ USE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
"List directory contents\n\n" \
"Options:\n" \
"\t-A\tdo not list implied . and ..\n" \
"\t-a\tdo not hide entries starting with .\n" \
"\t-C\tlist entries by columns\n" \
- USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
- USAGE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \
+ USE_FEATURE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
+ USE_FEATURE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \
"\t-d\tlist directory entries instead of contents\n" \
- USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
- USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
+ USE_FEATURE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
+ USE_FEATURE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
"\t-i\tlist the i-node for each file\n" \
"\t-l\tuse a long listing format\n" \
"\t-n\tlist numeric UIDs and GIDs instead of names\n" \
- USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
- USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
- USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
- USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
- USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
+ USE_FEATURE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
+ USE_FEATURE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
+ USE_FEATURE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
+ USE_FEATURE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
+ USE_FEATURE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
"\t-s\tlist the size of each file, in blocks\n" \
- USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
- USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
- USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
- USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
- USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
+ USE_FEATURE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
+ USE_FEATURE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
+ USE_FEATURE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
+ USE_FEATURE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
+ USE_FEATURE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
"\t-x\tlist entries by lines instead of by columns\n" \
- USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
+ USE_FEATURE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
USE_FEATURE_HUMAN_READABLE( \
"\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
- USAGE_SELINUX("\t-k\tprint security context\n") \
- USAGE_SELINUX("\t-K\tprint security context in long format\n")
+ USE_SELINUX("\t-k\tprint security context\n") \
+ USE_SELINUX("\t-K\tprint security context in long format\n")
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
"/dev/hda[0-15]\n"
#endif
-#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
-#define USAGE_MD5_SHA1_SUM_CHECK(a) a
-#else
-#define USAGE_MD5_SHA1_SUM_CHECK(a)
-#endif
-
#define md5sum_trivial_usage \
"[OPTION] [FILEs...]" \
- USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
+ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage \
- "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
"Options:\n" \
"With no FILE, or when FILE is -, read standard input." \
- USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
+ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
"\t-c\tcheck MD5 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
"\t-s\tdon't output anything, status code shows success\n" \
#define openvt_example_usage \
"openvt 2 /bin/ash\n"
-#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
-# define PASSWORD_ALG_TYPES(a) a
-#else
-# define PASSWORD_ALG_TYPES(a)
-#endif
#define passwd_trivial_usage \
"[OPTION] [name]"
#define passwd_full_usage \
"changes the password for the current user.\n" \
"Options:\n" \
"\t-a\tDefine which algorithm shall be used for the password\n" \
- "\t\t\t(Choices: des, md5" \
- PASSWORD_ALG_TYPES(", sha1") \
- ")\n\t-d\tDelete the password for the specified user account\n" \
+ "\t\t\t(Choices: des, md5, sha1)\n" \
+ "\t-d\tDelete the password for the specified user account\n" \
"\t-l\tLocks (disables) the specified user account\n" \
"\t-u\tUnlocks (re-enables) the specified user account"
#define ps_full_usage \
"Report process status\n" \
USAGE_PS \
- USAGE_SELINUX("\n\t-c\tshow SE Linux context") \
+ USE_SELINUX("\n\t-c\tshow SE Linux context") \
USAGE_PS_WIDE("\n\tw\twide output")
#define ps_example_usage \
"Preloads FILE(s) in RAM cache so that subsequent reads for those" \
"files do not block on disk I/O."
-#ifdef CONFIG_FEATURE_READLINK_FOLLOW
-#define USAGE_READLINK_FOLLOW(a) a
-#else
-#define USAGE_READLINK_FOLLOW(a)
-#endif
-
#define readlink_trivial_usage \
- USAGE_READLINK_FOLLOW("[-f] ") "FILE"
+ USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
"Displays the value of a symbolic link." \
- USAGE_READLINK_FOLLOW("\n\nOptions:\n" \
+ USE_FEATURE_READLINK_FOLLOW("\n\nOptions:\n" \
"\t-f\tcanonicalize by following all symlinks")
#define readprofile_trivial_usage \
#define reset_full_usage \
"Resets the screen."
-#define resize_trivial_usage \
- ""
-#define resize_full_usage \
- "Resizes the screen."
-
#define rm_trivial_usage \
"[OPTION]... FILE..."
#define rm_full_usage \
#define rmmod_example_usage \
"$ rmmod tulip\n"
-#ifdef CONFIG_FEATURE_IPV6
-# define USAGE_ROUTE_IPV6(a) a
-#else
-# define USAGE_ROUTE_IPV6(a) "\t"
-#endif
-
-
#define route_trivial_usage \
"[{add|del|delete}]"
#define route_full_usage \
"Edit the kernel's routing tables.\n\n" \
"Options:\n" \
- "\t-n\t\tDont resolve names\n" \
- "\t-e\t\tDisplay other/more information\n" \
- "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family"
+ "\t-n\tDont resolve names\n" \
+ "\t-e\tDisplay other/more information\n" \
+ "\t-A inet" USE_FEATURE_IPV6("{6}") "\tSelect address family"
#define rpm_trivial_usage \
"-i -q[ildc]p package.rpm"
#define sha1sum_trivial_usage \
"[OPTION] [FILEs...]" \
- USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
+ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
- "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
"Options:\n" \
"With no FILE, or when FILE is -, read standard input." \
- USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
+ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
"\t-c\tcheck SHA1 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
"\t-s\tdon't output anything, status code shows success\n" \
"\t-w\twarn about improperly formatted SHA1 checksum lines")
-#ifdef CONFIG_FEATURE_FANCY_SLEEP
-# define USAGE_FANCY_SLEEP(a) a
-# define USAGE_NOT_FANCY_SLEEP(a)
-#else
-# define USAGE_FANCY_SLEEP(a)
-# define USAGE_NOT_FANCY_SLEEP(a) a
-#endif
-
#define sleep_trivial_usage \
- USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
+ USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
- USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
- USAGE_FANCY_SLEEP( \
+ SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds.") \
+ USE_FEATURE_FANCY_SLEEP( \
"Pause for a time equal to the total of the args given, where each arg can\n" \
"\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
- USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
+ USE_FEATURE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
"[98528 second delay results]\n")
#if ENABLE_FEATURE_SORT_BIG
"\n\t-s|--signal <signal>\t\tsignal to send (default TERM)" \
"\n\t-U|--chuid <username>|<uid>\tstart process with this name"
-#ifdef CONFIG_FEATURE_STAT_FORMAT
-# define USAGE_STAT_FORMAT(a) a
-#else
-# define USAGE_STAT_FORMAT(a)
-#endif
#define stat_trivial_usage \
"[OPTION] FILE..."
#define stat_full_usage \
"display file (default) or filesystem status.\n\n" \
"Options:\n" \
- USAGE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \
+ USE_FEATURE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \
"\t-f\tdisplay filesystem status\n" \
"\t-L,-l\tdereference links\n" \
"\t-t\tdisplay info in terse form\n" \
- USAGE_STAT_FORMAT( \
+ USE_FEATURE_STAT_FORMAT( \
"\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
" %A Access rights in human readable form\n" \
#define sync_full_usage \
"Write all buffered filesystem blocks to disk."
-
-#ifdef CONFIG_FEATURE_ROTATE_LOGFILE
-# define USAGE_ROTATE_LOGFILE(a) a
-#else
-# define USAGE_ROTATE_LOGFILE(a)
-#endif
-#ifdef CONFIG_FEATURE_REMOTE_LOG
-# define USAGE_REMOTE_LOG(a) a
-#else
-# define USAGE_REMOTE_LOG(a)
-#endif
-#ifdef CONFIG_FEATURE_IPC_SYSLOG
-# define USAGE_IPC_LOG(a) a
-#else
-# define USAGE_IPC_LOG(a)
-#endif
-
#define sysctl_trivial_usage \
"[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
"\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
"\t-n\t\tRun as a foreground process\n" \
"\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \
- "\t-S\t\tMake logging output smaller." \
- USAGE_ROTATE_LOGFILE( \
+ "\t-l n\tSets the local log level of messages to n\n" \
+ "\t-S\t\tMake logging output smaller" \
+ USE_FEATURE_ROTATE_LOGFILE( \
"\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
"\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
- USAGE_REMOTE_LOG( \
+ USE_FEATURE_REMOTE_LOG( \
"\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
"\t-L\t\tLog locally and via network logging (default is network only)") \
- USAGE_IPC_LOG( \
+ USE_FEATURE_IPC_SYSLOG( \
"\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
-
-#ifndef CONFIG_FEATURE_FANCY_TAIL
-# define USAGE_UNSIMPLE_TAIL(a)
-#else
-# define USAGE_UNSIMPLE_TAIL(a) a
-#endif
#define tail_trivial_usage \
"[OPTION]... [FILE]..."
#define tail_full_usage \
"With more than one FILE, precede each with a header giving the\n" \
"file name. With no FILE, or when FILE is -, read standard input.\n\n" \
"Options:\n" \
- USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
+ USE_FEATURE_FANCY_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
"\t-n N[kbm]\tprint last N lines instead of last 10\n" \
"\t-f\t\toutput data as the file grows" \
- USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
+ USE_FEATURE_FANCY_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
"\t-s SEC\t\twait SEC seconds between reads with -f\n" \
"\t-v\t\talways output headers giving file names\n\n" \
"If the first character of N (bytes or lines) is a '+', output begins with \n" \
"$ tail -n 1 /etc/resolv.conf\n" \
"nameserver 10.0.0.1\n"
-#ifdef CONFIG_FEATURE_TAR_CREATE
-# define USAGE_TAR_CREATE(a) a
-#else
-# define USAGE_TAR_CREATE(a)
-#endif
-#ifdef CONFIG_FEATURE_TAR_EXCLUDE
-# define USAGE_TAR_EXCLUDE(a) a
-#else
-# define USAGE_TAR_EXCLUDE(a)
-#endif
-#ifdef CONFIG_FEATURE_TAR_GZIP
-# define USAGE_TAR_GZIP(a) a
-#else
-# define USAGE_TAR_GZIP(a)
-#endif
-#ifdef CONFIG_FEATURE_TAR_BZIP2
-# define USAGE_TAR_BZIP2(a) a
-#else
-# define USAGE_TAR_BZIP2(a)
-#endif
-#ifdef CONFIG_FEATURE_TAR_LZMA
-# define USAGE_TAR_LZMA(a) a
-#else
-# define USAGE_TAR_LZMA(a)
-#endif
-#ifdef CONFIG_FEATURE_TAR_COMPRESS
-# define USAGE_TAR_COMPRESS(a) a
-#else
-# define USAGE_TAR_COMPRESS(a)
-#endif
-
#define tar_trivial_usage \
- "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_LZMA("a") USAGE_TAR_COMPRESS("Z") "xtvO] " \
- USAGE_TAR_EXCLUDE("[-X FILE]") \
+ "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
+ USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
+ USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
+ USE_FEATURE_TAR_FROM("[-X FILE]") \
"[-f TARFILE] [-C DIR] [FILE(s)] ..."
#define tar_full_usage \
"Create, extract, or list files from a tar file.\n\n" \
"Options:\n" \
- USAGE_TAR_CREATE("\tc\t\tcreate\n") \
+ USE_FEATURE_TAR_CREATE("\tc\t\tcreate\n") \
"\tx\t\textract\n" \
"\tt\t\tlist\n" \
"\nArchive format selection:\n" \
- USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
- USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
- USAGE_TAR_LZMA("\ta\t\tFilter the archive through lzma\n") \
- USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
+ USE_FEATURE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
+ USE_FEATURE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
+ USE_FEATURE_TAR_LZMA("\ta\t\tFilter the archive through lzma\n") \
+ USE_FEATURE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
"\nFile selection:\n" \
"\tf\t\tname of TARFILE or \"-\" for stdin\n" \
"\tO\t\textract to stdout\n" \
- USAGE_TAR_EXCLUDE( \
+ USE_FEATURE_TAR_FROM( \
"\texclude\t\tfile to exclude\n" \
- "\tX\t\tfile with names to exclude\n" \
+ "\tX\t\tfile with names to exclude\n" \
) \
"\tC\t\tchange to directory DIR before operation\n" \
"\tv\t\tverbosely list files processed"
"$ echo $?\n" \
"1\n"
-#ifdef CONFIG_FEATURE_TFTP_GET
-# define USAGE_TFTP_GET(a) a
-#else
-# define USAGE_TFTP_GET(a)
-#endif
-#ifdef CONFIG_FEATURE_TFTP_PUT
-# define USAGE_TFTP_PUT(a) a
-#else
-# define USAGE_TFTP_PUT(a)
-#endif
-#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
-# define USAGE_TFTP_BS(a) a
-#else
-# define USAGE_TFTP_BS(a)
-#endif
-
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
"Options:\n" \
"\t-l FILE\tLocal FILE\n" \
"\t-r FILE\tRemote FILE" \
- USAGE_TFTP_GET( \
+ USE_FEATURE_TFTP_GET( \
"\n\t-g\tGet file" \
) \
- USAGE_TFTP_PUT( \
+ USE_FEATURE_TFTP_PUT( \
"\n\t-p\tPut file" \
) \
- USAGE_TFTP_BS( \
+ USE_FEATURE_TFTP_BLOCKSIZE( \
"\n\t-b SIZE\tTransfer blocks of SIZE octets" \
)
#define time_trivial_usage \
"\t-v\tDisplays verbose resource usage information"
#define top_trivial_usage \
- "[-d <seconds>]"
+ "[-b] [-n count] [-d seconds]"
#define top_full_usage \
- "top provides an view of processor activity in real time.\n" \
- "This utility reads the status for all processes in /proc each <seconds>\n" \
- "and shows the status for however many processes will fit on the screen.\n" \
- "This utility will not show processes that are started after program startup,\n" \
- "but it will show the EXIT status for and PIDs that exit while it is running."
+ "top provides a view of process activity in real time.\n" \
+ "It reads the status of all processes from /proc each <seconds>\n" \
+ "and shows the status for however many processes will fit on the screen."
#define touch_trivial_usage \
"[-c] FILE [FILE ...]"
"\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated\n" \
"\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
"\t-q,\t--quit\tQuit after obtaining lease\n" \
+ "\t-R,\t--release\tRelease IP on quit\n" \
"\t-r,\t--request=IP\tIP address to request (default: none)\n" \
"\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
"\t-t,\t--retries=NUM\tSend up to NUM request packets\n"\
#define whoami_full_usage \
"Prints the user name associated with the current effective user id."
-#ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
-#define USAGE_XARGS_CONFIRMATION(a) a
-#else
-#define USAGE_XARGS_CONFIRMATION(a)
-#endif
-#ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
-#define USAGE_XARGS_TERMOPT(a) a
-#else
-#define USAGE_XARGS_TERMOPT(a)
-#endif
-#ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
-#define USAGE_XARGS_ZERO_TERM(a) a
-#else
-#define USAGE_XARGS_ZERO_TERM(a)
-#endif
-
-
#define xargs_trivial_usage \
- "[COMMAND] [OPTIONS] [ARGS...]"
+ "[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
"Executes COMMAND on every item given by standard input.\n\n" \
"Options:\n" \
- USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
+ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
"\t-r\tDo not run command for empty read lines\n" \
- USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
- USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
+ USE_FEATURE_XARGS_SUPPORT_TERMOPT("\t-x\tExit if the size is exceeded\n") \
+ USE_FEATURE_XARGS_SUPPORT_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
"\t-t\tPrint the command line on stderr before executing it"
#define xargs_example_usage \
"$ ls | xargs gzip\n" \