"\n -H hwtype Hardware address type"
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
+ "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
#define arping_full_usage \
"Ping hosts by ARP requests/replies" \
"\n\nOptions:\n" \
" -q Quiet\n" \
" -b Keep broadcasting, don't go unicast\n" \
" -D Duplicated address detection mode\n" \
- " -U Unsolicited ARP mode, update your neighbours\n" \
- " -A ARP answer mode, update your neighbours\n" \
- " -c count Stop after sending count ARP request packets\n" \
+ " -U Unsolicited ARP mode, update your neighbors\n" \
+ " -A ARP answer mode, update your neighbors\n" \
+ " -c N Stop after sending N ARP requests\n" \
" -w timeout Time to wait for ARP reply, in seconds\n" \
- " -I device Outgoing interface name, default is eth0\n" \
- " -s sender Set specific sender IP address\n" \
- " target Target IP address of ARP request"
+ " -I dev Interface to use (default eth0)\n" \
+ " -s sender Sender IP address\n" \
+ " target Target IP address"
#define ash_trivial_usage \
"[FILE]...\n" \
"\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
"\n tests/actions to command line arguments only") \
"\n -name PATTERN File name (w/o directory name) matches PATTERN" \
+ "\n -iname PATTERN Case insensitive -name" \
USE_FEATURE_FIND_PATH( \
"\n -path PATTERN Path matches PATTERN") \
USE_FEATURE_FIND_REGEX( \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define hexdump_trivial_usage \
- "[-[bcCdefnosvx]] [OPTION] FILE"
+ "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
#define hexdump_full_usage \
"Display file(s) or standard input in a user specified format" \
- "\n\nOptions:\n" \
- " -b One-byte octal display\n" \
- " -c One-byte character display\n" \
- " -C Canonical hex+ASCII, 16 bytes per line\n" \
- " -d Two-byte decimal display\n" \
- " -e FORMAT STRING\n" \
- " -f FORMAT FILE\n" \
- " -n LENGTH Interpret only LENGTH bytes of input\n" \
- " -o Two-byte octal display\n" \
- " -s OFFSET Skip OFFSET bytes\n" \
- " -v Display all input data\n" \
- " -x Two-byte hexadecimal display"
+ "\n\nOptions:" \
+ "\n -b One-byte octal display" \
+ "\n -c One-byte character display" \
+ "\n -C Canonical hex+ASCII, 16 bytes per line" \
+ "\n -d Two-byte decimal display" \
+ "\n -e FORMAT STRING" \
+ "\n -f FORMAT FILE" \
+ "\n -n LENGTH Interpret only LENGTH bytes of input" \
+ "\n -o Two-byte octal display" \
+ "\n -s OFFSET Skip OFFSET bytes" \
+ "\n -v Display all input data" \
+ "\n -x Two-byte hexadecimal display" \
+ USE_FEATURE_HEXDUMP_REVERSE( \
+ "\n -R Reverse of 'hexdump -Cv'") \
+
+#define hd_trivial_usage \
+ "FILE..."
+#define hd_full_usage \
+ "hd is an alias for hexdump -C"
#define hostid_trivial_usage \
""
"and * (run both after creating and before deleting). The commands run in\n" \
"the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
- "Config file parsing stops on the first matching line. If no config\n"\
- "entry is matched, devices are created with default 0:0 660. (Make\n"\
+ "Config file parsing stops on the first matching line. If no config\n" \
+ "entry is matched, devices are created with default 0:0 660. (Make\n" \
"the last line match .* to override this.)\n\n" \
)
" FIRST LAST\n" \
" FIRST INCREMENT LAST"
+#define sestatus_trivial_usage \
+ "[-vb]"
+#define sestatus_full_usage \
+ "-v Verbose\n" \
+ "-b Display current state of booleans"
+
#define setconsole_trivial_usage \
"[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
#define setconsole_full_usage \
"[FILE]...\n" \
"or: sh -c command [args]..."
#define lash_full_usage \
- "The BusyBox LAme SHell (command interpreter)"
-#define lash_notes_usage \
- "This command does not yet have proper documentation.\n\n" \
- "Use lash just as you would use any other shell. It properly handles pipes,\n" \
- "redirects, job control, can be used as the shell for scripts, and has a\n" \
- "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
- "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
- "use ash or bash. If you just need a very simple and extremely small shell,\n" \
- "this will do the job."
+ "lash is deprecated, please use hush"
#define last_trivial_usage \
""
"Configure kernel parameters at runtime" \
"\n\nOptions:\n" \
" -n Disable printing of key names\n" \
+ " -e Don't warn about unknown keys\n" \
" -w Change sysctl setting\n" \
" -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)\n" \
" -a Display all values\n" \
" -A Display all values in table form"
#define sysctl_example_usage \
- "sysctl [-n] variable...\n" \
- "sysctl [-n] -w variable=value...\n" \
- "sysctl [-n] -a\n" \
- "sysctl [-n] -p file (default /etc/sysctl.conf)\n" \
- "sysctl [-n] -A\n"
+ "sysctl [-n] [-e] variable...\n" \
+ "sysctl [-n] [-e] -w variable=value...\n" \
+ "sysctl [-n] [-e] -a\n" \
+ "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
+ "sysctl [-n] [-e] -A\n"
#define syslogd_trivial_usage \
"[OPTION]..."
#define udhcpc_trivial_usage \
"[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
- " [-p pidfile] [-r IP] [-s script]"
+ " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..."
#define udhcpc_full_usage \
USE_GETOPT_LONG( \
- " -V,--vendorclass=CLASSID Set vendor class identifier" \
- "\n -i,--interface=INTERFACE Interface to use (default: eth0)" \
+ " -V,--vendorclass=CLASSID Vendor class identifier" \
+ "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
"\n -H,-h,--hostname=HOSTNAME Client hostname" \
- "\n -c,--clientid=CLIENTID Set client identifier" \
+ "\n -c,--clientid=CLIENTID Client identifier" \
"\n -C,--clientid-none Suppress default client identifier" \
- "\n -p,--pidfile=file Store process ID of daemon in file" \
+ "\n -p,--pidfile=file Create pidfile" \
"\n -r,--request=IP IP address to request" \
- "\n -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)" \
- "\n -t,--retries=N Send up to N request packets"\
- "\n -T,--timeout=N Try to get a lease for N seconds (default: 3)"\
- "\n -A,--tryagain=N Wait N seconds (default: 60) after failure"\
+ "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t,--retries=N Send up to N request packets" \
+ "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \
+ "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
"\n -f,--foreground Run in foreground" \
- "\n -b,--background Background if lease cannot be immediately negotiated" \
+ "\n -b,--background Background if lease is not immediately obtained" \
"\n -S,--syslog Log to syslog too" \
- "\n -n,--now Exit with failure if lease cannot be immediately negotiated" \
+ "\n -n,--now Exit with failure if lease is not immediately obtained" \
"\n -q,--quit Quit after obtaining lease" \
"\n -R,--release Release IP on quit" \
- "\n -v,--version Display version" \
+ "\n -O,--request-option=OPT Request DHCP option OPT from server" \
+ USE_FEATURE_UDHCPC_ARPING( \
+ "\n -a,--arping Use arping to validate offered address" \
+ ) \
) \
SKIP_GETOPT_LONG( \
- " -V CLASSID Set vendor class identifier" \
+ " -V CLASSID Vendor class identifier" \
"\n -i INTERFACE Interface to use (default: eth0)" \
"\n -H,-h HOSTNAME Client hostname" \
- "\n -c CLIENTID Set client identifier" \
+ "\n -c CLIENTID Client identifier" \
"\n -C Suppress default client identifier" \
- "\n -p file Store process ID of daemon in file" \
+ "\n -p file Create pidfile" \
"\n -r IP IP address to request" \
- "\n -s file Run file at dhcp events (default: /usr/share/udhcpc/default.script)" \
- "\n -t N Send up to N request packets"\
- "\n -T N Try to get a lease for N seconds (default: 3)"\
- "\n -A N Wait N seconds (default: 60) after failure"\
+ "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t N Send up to N request packets" \
+ "\n -T N Try to get a lease for N seconds (default 3)" \
+ "\n -A N Wait N seconds (default 20) after failure" \
"\n -f Run in foreground" \
- "\n -b Background if lease cannot be immediately negotiated" \
+ "\n -b Background if lease is not immediately obtained" \
"\n -S Log to syslog too" \
- "\n -n Exit with failure if lease cannot be immediately negotiated" \
+ "\n -n Exit with failure if lease is not immediately obtained" \
"\n -q Quit after obtaining lease" \
"\n -R Release IP on quit" \
- "\n -v Display version" \
+ "\n -O OPT Request DHCP option OPT from server" \
+ USE_FEATURE_UDHCPC_ARPING( \
+ "\n -a Use arping to validate offered address" \
+ ) \
)
#define udhcpd_trivial_usage \
"$ umount /dev/hdc1\n"
#define uname_trivial_usage \
- "[OPTION]..."
+ "[-amnrspv]"
#define uname_full_usage \
- "Print certain system information. With no OPTION, same as -s." \
+ "Print system information." \
"\n\nOptions:\n" \
- " -a Print all information\n" \
+ " -a Print all\n" \
" -m The machine (hardware) type\n" \
- " -n Print machine's hostname\n" \
- " -r Print OS release\n" \
- " -s Print OS name\n" \
- " -p Print host processor type\n" \
- " -v Print OS version"
+ " -n Hostname\n" \
+ " -r OS release\n" \
+ " -s OS name (default)\n" \
+ " -p Processor type\n" \
+ " -v OS version"
#define uname_example_usage \
"$ uname -a\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
"Uncompress .Z file[s]" \
"\n\nOptions:\n" \
" -c Extract to stdout\n" \
- " -f Force overwrite an existing file"
+ " -f Overwrite an existing file"
#define unexpand_trivial_usage \
"[-f][-a][-t NUM] [FILE|-]"
"/bin/login\n"
#define who_trivial_usage \
- " "
+ "[-a]"
#define who_full_usage \
- "Print the current user names and related information"
+ "Show who is logged on" \
+ "\n\nOptions:\n" \
+ " -a show all"
#define whoami_trivial_usage \
""
projects / oweals / busybox.git / blobdiff