" -g GECOS GECOS field\n" \
" -s SHELL Login shell\n" \
" -G GROUP Add user to existing group\n" \
- " -S Create a system user (ignored)\n" \
+ " -S Create a system user\n" \
" -D Do not assign a password\n" \
" -H Do not create home directory"
"\n -H hwtype Hardware address type"
#define arping_trivial_usage \
- "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
+ "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
#define arping_full_usage \
"Ping hosts by ARP requests/replies" \
"\n\nOptions:\n" \
" -q Quiet\n" \
" -b Keep broadcasting, don't go unicast\n" \
" -D Duplicated address detection mode\n" \
- " -U Unsolicited ARP mode, update your neighbours\n" \
- " -A ARP answer mode, update your neighbours\n" \
- " -c count Stop after sending count ARP request packets\n" \
+ " -U Unsolicited ARP mode, update your neighbors\n" \
+ " -A ARP answer mode, update your neighbors\n" \
+ " -c N Stop after sending N ARP requests\n" \
" -w timeout Time to wait for ARP reply, in seconds\n" \
- " -I device Outgoing interface name, default is eth0\n" \
- " -s sender Set specific sender IP address\n" \
- " target Target IP address of ARP request"
+ " -I dev Interface to use (default eth0)\n" \
+ " -s sender Sender IP address\n" \
+ " target Target IP address"
#define ash_trivial_usage \
"[FILE]...\n" \
"The ash shell (command interpreter)"
#define awk_trivial_usage \
- "[OPTION]... [program-text] [FILE ...]"
+ "[OPTION]... [program-text] [FILE...]"
#define awk_full_usage \
"Options:\n" \
" -v var=val Set variable\n" \
" -F sep Use sep as field separator\n" \
- " -f filename Read program from file"
+ " -f file Read program from file"
#define basename_trivial_usage \
"FILE [SUFFIX]"
" -c Write output to standard output\n" \
" -f Force"
+#define bzip2_trivial_usage \
+ "[OPTION]... [FILE]..."
+#define bzip2_full_usage \
+ "Compress FILE(s) with bzip2 algorithm.\n" \
+ "When FILE is '-' or unspecified, reads standard input. Implies -c." \
+ "\n\nOptions:" \
+ "\n -c Write output to standard output instead of FILE.bz2" \
+ "\n -d Decompress" \
+ "\n -f Force" \
+ "\n -1..-9 Compression level"
+
#define busybox_notes_usage \
"Hello world!\n"
" -v Set the file's version/generation number"
#define chcon_trivial_usage \
- "[OPTIONS] CONTEXT FILE...\n" \
- " chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" \
- " chcon [OPTIONS] --reference=RFILE FILE...\n"
+ "[OPTIONS] CONTEXT FILE..." \
+ "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
+ USE_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n chcon [OPTIONS] --reference=RFILE FILE..." \
+ )
#define chcon_full_usage \
"Change the security context of each FILE to CONTEXT\n" \
- "\n -v, --verbose Verbose" \
- "\n -c, --changes Report changes made" \
- "\n -h, --no-dereference Affect symlinks instead of their targets" \
- "\n -f, --silent, --quiet Suppress most error messages" \
+ USE_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n -v,--verbose Verbose" \
+ "\n -c,--changes Report changes made" \
+ "\n -h,--no-dereference Affect symlinks instead of their targets" \
+ "\n -f,--silent,--quiet Suppress most error messages" \
"\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
- "\n -u, --user=USER Set user USER in the target security context" \
- "\n -r, --role=ROLE Set role ROLE in the target security context" \
- "\n -t, --type=TYPE Set type TYPE in the target security context" \
- "\n -l, --range=RANGE Set range RANGE in the target security context" \
- "\n -R, --recursive Recurse subdirectories" \
+ "\n -u,--user=USER Set user USER in the target security context" \
+ "\n -r,--role=ROLE Set role ROLE in the target security context" \
+ "\n -t,--type=TYPE Set type TYPE in the target security context" \
+ "\n -l,--range=RANGE Set range RANGE in the target security context" \
+ "\n -R,--recursive Recurse subdirectories" \
+ ) \
+ SKIP_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n -v Verbose" \
+ "\n -c Report changes made" \
+ "\n -h Affect symlinks instead of their targets" \
+ "\n -f Suppress most error messages" \
+ "\n -u USER Set user USER in the target security context" \
+ "\n -r ROLE Set role ROLE in the target security context" \
+ "\n -t TYPE Set type TYPE in the target security context" \
+ "\n -l RNG Set range RNE in the target security context" \
+ "\n -R Recurse subdirectories" \
+ )
+
#define chmod_trivial_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
" -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
" -d num Debug level\n" \
" -l num Log level (8 - default)\n" \
- " -S Log to syslogd (default)\n" \
+ " -S Log to syslog (default)\n" \
" -L file Log to file\n" \
" -f Run in foreground\n" \
" -b Run in background (default)\n" \
"Wed Apr 12 18:52:41 MDT 2000\n"
#define dc_trivial_usage \
- "expression ..."
+ "expression..."
#define dc_full_usage \
"This is a Tiny RPN calculator that understands the\n" \
"following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
#define devfsd_trivial_usage \
"mntpnt [-v]" \
- USE_DEVFSD_FG_NP("[-fg][-np]" )
+ USE_DEVFSD_FG_NP("[-fg][-np]")
#define devfsd_full_usage \
"Manage devfs permissions and old device name symlinks" \
"\n\nOptions:" \
"\n and processing synthetic REGISTER events," \
"\n do not poll for events")
+/* -k is accepted but ignored for !HUMAN_READABLE,
+ * but we won't mention this (unimportant) */
+#if ENABLE_FEATURE_HUMAN_READABLE || ENABLE_FEATURE_DF_INODE
+#define DF_HAS_OPTIONS(x) x
+#else
+#define DF_HAS_OPTIONS(x)
+#endif
#define df_trivial_usage \
- "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
+ DF_HAS_OPTIONS("[-") \
+ USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \
+ DF_HAS_OPTIONS("] ") "[FILESYSTEM...]"
#define df_full_usage \
- "Print the filesystem space used and space available" \
+ "Print filesystem usage statistics" \
+ DF_HAS_OPTIONS("\n\nOptions:") \
USE_FEATURE_HUMAN_READABLE( \
- "\n\nOptions control size display:" \
"\n -h Human readable (e.g. 1K 243M 2G)" \
"\n -m 1024*1024 blocks" \
- "\n -k 1024 blocks") \
- SKIP_FEATURE_HUMAN_READABLE( \
- "\n\nOptions:" \
- "\n -k Ignored")
+ "\n -k 1024 blocks" \
+ ) \
+ USE_FEATURE_DF_INODE( \
+ "\n -i Inodes" \
+ )
#define df_example_usage \
"$ df\n" \
"Filesystem 1k-blocks Used Available Use% Mounted on\n" \
#define dmesg_full_usage \
"Print or control the kernel ring buffer" \
"\n\nOptions:\n" \
- " -c Clears the ring buffer's contents after printing\n" \
- " -n LEVEL Sets console logging level\n" \
- " -s SIZE Use a buffer of size SIZE"
+ " -c Clear ring buffer after printing\n" \
+ " -n LEVEL Set console logging level\n" \
+ " -s SIZE Buffer size"
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dumpleases_full_usage \
"Display DHCP leases granted by udhcpd" \
"\n\nOptions:\n" \
- " -f, --file=FILENAME Leases file to load\n" \
- " -r, --remaining Interpret lease times as time remaining\n" \
- " -a, --absolute Interpret lease times as expire time"
+ USE_GETOPT_LONG( \
+ " -f,--file=FILE Leases file to load\n" \
+ " -r,--remaining Interpret lease times as time remaining\n" \
+ " -a,--absolute Interpret lease times as expire time" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -f FILE Leases file to load\n" \
+ " -r Interpret lease times as time remaining\n" \
+ " -a Interpret lease times as expire time" \
+ )
#define e2fsck_trivial_usage \
"[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
" -L file Set badblocks list"
#define echo_trivial_usage \
- USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
+ USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
#define echo_full_usage \
"Print the specified ARGs to stdout" \
USE_FEATURE_FANCY_ECHO( \
#define expand_full_usage \
"Convert tabs to spaces, writing to standard output." \
"\n\nOptions:" \
- "\n -i" USE_FEATURE_EXPAND_LONG_OPTIONS(",--initial") \
- " Do not convert tabs after non blanks" \
- "\n -t" USE_FEATURE_EXPAND_LONG_OPTIONS(",--tabs=N") \
- " Tabstops every N chars"
+ USE_FEATURE_EXPAND_LONG_OPTIONS( \
+ "\n -i,--initial Do not convert tabs after non blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
+ ) \
+ SKIP_FEATURE_EXPAND_LONG_OPTIONS( \
+ "\n -i Do not convert tabs after non blanks" \
+ "\n -t Tabstops every N chars" \
+ )
#define expr_trivial_usage \
"EXPRESSION"
#define expr_full_usage \
"Print the value of EXPRESSION to standard output.\n\n" \
"EXPRESSION may be:\n" \
- " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
- " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
- " ARG1 < ARG2 ARG1 is less than ARG2\n" \
- " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
- " ARG1 = ARG2 ARG1 is equal to ARG2\n" \
- " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
- " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
- " ARG1 > ARG2 ARG1 is greater than ARG2\n" \
- " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
- " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
- " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
- " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
- " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
+ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
+ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
+ " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
+ " ARG1 <= ARG2\n" \
+ " ARG1 = ARG2\n" \
+ " ARG1 != ARG2\n" \
+ " ARG1 >= ARG2\n" \
+ " ARG1 > ARG2\n" \
+ " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
+ " ARG1 - ARG2\n" \
+ " ARG1 * ARG2\n" \
+ " ARG1 / ARG2\n" \
+ " ARG1 % ARG2\n" \
" STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
" match STRING REGEXP Same as STRING : REGEXP\n" \
" substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
"\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
"\n tests/actions to command line arguments only") \
"\n -name PATTERN File name (w/o directory name) matches PATTERN" \
+ "\n -iname PATTERN Case insensitive -name" \
USE_FEATURE_FIND_PATH( \
"\n -path PATTERN Path matches PATTERN") \
USE_FEATURE_FIND_REGEX( \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
- "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys ...]"
+ "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]"
#define fsck_full_usage \
"Check and repair filesystems" \
"\n\nOptions:\n" \
#define fsck_minix_full_usage \
"Perform a consistency check for MINIX filesystems" \
"\n\nOptions:\n" \
- " -l Lists all filenames\n" \
+ " -l List all filenames\n" \
" -r Perform interactive repairs\n" \
" -a Perform automatic repairs\n" \
" -v Verbose\n" \
- " -s Outputs super-block information\n" \
- " -m Activates MINIX-like \"mode not cleared\" warnings\n" \
+ " -s Output super-block information\n" \
+ " -m Activate MINIX-like \"mode not cleared\" warnings\n" \
" -f Force file system check"
#define ftpget_trivial_usage \
#define ftpget_full_usage \
"Retrieve a remote file via FTP" \
"\n\nOptions:\n" \
- " -c, --continue Continue a previous transfer\n" \
- " -v, --verbose Verbose\n" \
- " -u, --username Username to be used\n" \
- " -p, --password Password to be used\n" \
- " -P, --port Port number to be used"
+ USE_GETOPT_LONG( \
+ " -c,--continue Continue previous transfer\n" \
+ " -v,--verbose Verbose\n" \
+ " -u,--username Username\n" \
+ " -p,--password Password\n" \
+ " -P,--port Port number" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -c Continue previous transfer\n" \
+ " -v Verbose\n" \
+ " -u Username\n" \
+ " -p Password\n" \
+ " -P Port number" \
+ )
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage \
"Store a local file on a remote machine via FTP" \
"\n\nOptions:\n" \
- " -v, --verbose Verbose\n" \
- " -u, --username Username to be used\n" \
- " -p, --password Password to be used\n" \
- " -P, --port Port number to be used"
+ USE_GETOPT_LONG( \
+ " -v,--verbose Verbose\n" \
+ " -u,--username Username\n" \
+ " -p,--password Password\n" \
+ " -P,--port Port number" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -v Verbose\n" \
+ " -u Username\n" \
+ " -p Password\n" \
+ " -P Port number" \
+ )
#define fuser_trivial_usage \
"[options] file OR port/proto"
"[OPTIONS]..."
#define getopt_full_usage \
"Parse command options\n" \
- " -a, --alternative Allow long options starting with single -\n" \
- " -l, --longoptions=longopts Long options to be recognized\n" \
- " -n, --name=progname The name under which errors are reported\n" \
- " -o, --options=optstring Short options to be recognized\n" \
- " -q, --quiet Disable error reporting by getopt(3)\n" \
- " -Q, --quiet-output No normal output\n" \
- " -s, --shell=shell Set shell quoting conventions\n" \
- " -T, --test Test for getopt(1) version\n" \
- " -u, --unquoted Do not quote the output"
+ USE_GETOPT_LONG( \
+ " -a,--alternative Allow long options starting with single -\n" \
+ " -l,--longoptions=longopts Long options to be recognized\n" \
+ " -n,--name=progname The name under which errors are reported\n" \
+ " -o,--options=optstring Short options to be recognized\n" \
+ " -q,--quiet Disable error reporting by getopt(3)\n" \
+ " -Q,--quiet-output No normal output\n" \
+ " -s,--shell=shell Set shell quoting conventions\n" \
+ " -T,--test Test for getopt(1) version\n" \
+ " -u,--unquoted Don't quote the output" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -a Allow long options starting with single -\n" \
+ " -l longopts Long options to be recognized\n" \
+ " -n progname The name under which errors are reported\n" \
+ " -o optstring Short options to be recognized\n" \
+ " -q Disable error reporting by getopt(3)\n" \
+ " -Q No normal output\n" \
+ " -s shell Set shell quoting conventions\n" \
+ " -T Test for getopt(1) version\n" \
+ " -u Don't quote the output" \
+ )
#define getopt_example_usage \
"$ cat getopt.test\n" \
"#!/bin/sh\n" \
"Uncompress FILE (or standard input if FILE is '-')" \
"\n\nOptions:\n" \
" -c Write output to standard output\n" \
- " -f Force read when source is a terminal\n" \
+ " -f Force\n" \
" -t Test compressed file integrity"
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"\n\nOptions:\n" \
" -c Write output to standard output instead of FILE.gz\n" \
" -d Decompress\n" \
- " -f Force write when destination is a terminal"
+ " -f Force"
#define gzip_example_usage \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define hexdump_trivial_usage \
- "[-[bcCdefnosvx]] [OPTION] FILE"
+ "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
#define hexdump_full_usage \
"Display file(s) or standard input in a user specified format" \
- "\n\nOptions:\n" \
- " -b One-byte octal display\n" \
- " -c One-byte character display\n" \
- " -C Canonical hex+ASCII, 16 bytes per line\n" \
- " -d Two-byte decimal display\n" \
- " -e FORMAT STRING\n" \
- " -f FORMAT FILE\n" \
- " -n LENGTH Interpret only length bytes of input\n" \
- " -o Two-byte octal display\n" \
- " -s OFFSET Skip offset bytes\n" \
- " -v Display all input data\n" \
- " -x Two-byte hexadecimal display"
+ "\n\nOptions:" \
+ "\n -b One-byte octal display" \
+ "\n -c One-byte character display" \
+ "\n -C Canonical hex+ASCII, 16 bytes per line" \
+ "\n -d Two-byte decimal display" \
+ "\n -e FORMAT STRING" \
+ "\n -f FORMAT FILE" \
+ "\n -n LENGTH Interpret only LENGTH bytes of input" \
+ "\n -o Two-byte octal display" \
+ "\n -s OFFSET Skip OFFSET bytes" \
+ "\n -v Display all input data" \
+ "\n -x Two-byte hexadecimal display" \
+ USE_FEATURE_HEXDUMP_REVERSE( \
+ "\n -R Reverse of 'hexdump -Cv'") \
+
+#define hd_trivial_usage \
+ "FILE..."
+#define hd_full_usage \
+ "hd is an alias for hexdump -C"
#define hostid_trivial_usage \
""
"\n -d STRING URL decode STRING" \
#define hwclock_trivial_usage \
+ USE_GETOPT_LONG( \
"[-r|--show] [-s|--hctosys] [-w|--systohc]" \
" [-l|--localtime] [-u|--utc]" \
- " [-f FILE]"
+ " [-f FILE]" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
+ )
#define hwclock_full_usage \
"Query and set a hardware clock (RTC)" \
"\n\nOptions:\n" \
" -r Read hardware clock and print result\n" \
" -s Set the system time from the hardware clock\n" \
- " -w Set the hardware clock to the current system time\n" \
+ " -w Set the hardware clock to the system time\n" \
" -u The hardware clock is kept in coordinated universal time\n" \
" -l The hardware clock is kept in local time\n" \
" -f FILE Use the specified clock (e.g. /dev/rtc2)"
"Print information for USERNAME or the current user" \
"\n\nOptions:\n" \
USE_SELINUX( \
- " -Z prints only the security context\n" \
+ " -Z Prints only the security context\n" \
) \
" -g Prints only the group ID\n" \
" -u Prints only the user ID\n" \
#define ipcalc_full_usage \
"Calculate IP network settings from a IP address" \
"\n\nOptions:" \
- "\n -b --broadcast Display calculated broadcast address" \
- "\n -n --network Display calculated network address" \
- "\n -m --netmask Display default netmask for IP" \
+ USE_FEATURE_IPCALC_LONG_OPTIONS( \
+ "\n -b,--broadcast Display calculated broadcast address" \
+ "\n -n,--network Display calculated network address" \
+ "\n -m,--netmask Display default netmask for IP" \
+ USE_FEATURE_IPCALC_FANCY( \
+ "\n -p,--prefix Display the prefix for IP/NETMASK" \
+ "\n -h,--hostname Display first resolved host name" \
+ "\n -s,--silent Don't ever display error messages" \
+ ) \
+ ) \
+ SKIP_FEATURE_IPCALC_LONG_OPTIONS( \
+ "\n -b Display calculated broadcast address" \
+ "\n -n Display calculated network address" \
+ "\n -m Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
- "\n -p --prefix Display the prefix for IP/NETMASK" \
- "\n -h --hostname Display first resolved host name" \
- "\n -s --silent Don't ever display error messages")
+ "\n -p Display the prefix for IP/NETMASK" \
+ "\n -h Display first resolved host name" \
+ "\n -s Don't ever display error messages" \
+ ) \
+ )
#define ipcrm_trivial_usage \
"[-[MQS] key] [-[mqs] id]"
" [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
" [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]"
+#define kbd_mode_trivial_usage \
+ "[-a|k|s|u]"
+#define kbd_mode_full_usage \
+ "Report or set the keyboard mode" \
+ "\n\nOptions set mode:\n" \
+ " -a Default (ASCII)\n" \
+ " -k Medium-raw (keyboard)\n" \
+ " -s Raw (scancode)\n" \
+ " -u Unicode (utf-8)"
+
#define kill_trivial_usage \
- "[-l] [-signal] process-id [process-id ...]"
+ "[-l] [-signal] process-id [process-id...]"
#define kill_full_usage \
"Send a signal (default is TERM) to the specified process(es)" \
"\n\nOptions:\n" \
"$ kill 252\n"
#define killall_trivial_usage \
- "[-l] [-q] [-signal] process-name [process-name ...]"
+ "[-l] [-q] [-signal] process-name [process-name...]"
#define killall_full_usage \
"Send a signal (default is TERM) to the specified process(es)" \
"\n\nOptions:\n" \
" reached"
#define setarch_trivial_usage \
- "personality program [args ...]"
+ "personality program [args...]"
#define setarch_full_usage \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
"$ logger \"hello\"\n"
#define login_trivial_usage \
- "[OPTION]... [username] [ENV=VAR ...]"
+ "[OPTION]... [username] [ENV=VAR...]"
#define login_full_usage \
"Begin a new session on the system" \
"\n\nOptions:\n" \
"and * (run both after creating and before deleting). The commands run in\n" \
"the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
- "Config file parsing stops on the first matching line. If no config\n"\
- "entry is matched, devices are created with default 0:0 660. (Make\n"\
+ "Config file parsing stops on the first matching line. If no config\n" \
+ "entry is matched, devices are created with default 0:0 660. (Make\n" \
"the last line match .* to override this.)\n\n" \
)
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
- "[-knqrsv] MODULE [symbol=value ...]"
+ "[-knqrsv] MODULE [symbol=value...]"
#define modprobe_full_usage \
"Options:\n" \
" -k Make module autoclean-able\n" \
- " -n Just show what would be done\n" \
+ " -n Dry run\n" \
" -q Quiet\n" \
" -r Remove module (stacks) or do autoclean\n" \
" -s Report via syslog instead of stderr\n" \
" the module and the alias.\n" \
" A module can be aliased more than once.\n" \
"\n" \
-" options <mod_name|alias_name> <symbol=value ...>\n" \
+" options <mod_name|alias_name> <symbol=value...>\n" \
" When loading module mod_name (or the module aliased by alias_name), pass\n" \
" the \"symbol=value\" pairs as option to that module.\n" \
"\n" \
" from the command line\n"
#define more_trivial_usage \
- "[FILE ...]"
+ "[FILE...]"
#define more_full_usage \
"View FILE or standard input one screenful at a time"
#define more_example_usage \
"\n\nOptions:\n" \
" -a Mount all filesystems in fstab\n" \
USE_FEATURE_MTAB_SUPPORT( \
- " -f \"Fake\" Add entry to mount table but don't mount it\n" \
- " -n Don't write a mount table entry\n" \
+ " -f Update /etc/mtab, but don't mount\n" \
+ " -n Don't update /etc/mtab\n" \
) \
- " -o option One of many filesystem options, listed below\n" \
- " -r Mount the filesystem read-only\n" \
+ " -r Read-only mount\n" \
" -t fs-type Filesystem type\n" \
- " -w Mount for reading and writing (default)\n" \
+ " -w Read-write mount (default)\n" \
"\n" \
- "Options for use with the \"-o\" flag:\n" \
+ "-o option:\n" \
USE_FEATURE_MOUNT_LOOP( \
" loop Ignored (loop devices are autodetected)\n" \
) \
USE_NC_SERVER( \
"-l Listen mode, for inbound connects\n" \
) \
- "-n Do not do DNS resolution" \
+ "-n Don't do DNS resolution" \
"\n-s addr Local address" \
"\n-p port Local port" \
"\n-u UDP mode" \
)
#define nice_trivial_usage \
- "[-n ADJUST] [COMMAND [ARG] ...]"
+ "[-n ADJUST] [COMMAND [ARG]...]"
#define nice_full_usage \
"Run a program with modified scheduling priority" \
"\n\nOptions:\n" \
" -u Unlocks (re-enables) the specified user account"
#define chpasswd_trivial_usage \
- "[--md5|--encrypt]"
+ USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]")
#define chpasswd_full_usage \
"Read user:password information from stdin\n" \
"and update /etc/passwd accordingly." \
"\n\nOptions:" \
- "\n -e, --encrypt Supplied passwords are in encrypted form" \
- "\n -m, --md5 Use MD5 encryption instead of DES"
+ USE_GETOPT_LONG( \
+ "\n -e,--encrypt Supplied passwords are in encrypted form" \
+ "\n -m,--md5 Use MD5 encryption instead of DES" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ "\n -e Supplied passwords are in encrypted form" \
+ "\n -m Use MD5 encryption instead of DES" \
+ )
#define patch_trivial_usage \
"[-p num] [-i diff]"
#endif
#define pidof_trivial_usage \
- "process-name [OPTION] [process-name ...]"
+ "process-name [OPTION] [process-name...]"
#define pidof_full_usage \
"List the PIDs of all processes with names that match the\n" \
" -n Disable byte order auto-detection"
#define realpath_trivial_usage \
- "pathname ..."
+ "pathname..."
#define realpath_full_usage \
"Return the absolute pathnames of given argument"
" -f Force reboot (don't go through init)"
#define renice_trivial_usage \
- "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID ...]"
+ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
#define renice_full_usage \
"Change priority of running processes" \
"\n\nOptions:\n" \
- " -n Adjusts current nice value (smaller is faster)\n" \
+ " -n Adjust current nice value (smaller is faster)\n" \
" -p Process id(s) (default)\n" \
" -g Process group id(s)\n" \
" -u Process user name(s) and/or id(s)"
#define restorecon_full_usage \
"Reset security contexts of files in pathname\n" \
"\n -i Ignore files that do not exist" \
- "\n -f filename File with list of files to process. Use - for stdin" \
+ "\n -f file File with list of files to process. Use - for stdin" \
"\n -e directory Directory to exclude" \
"\n -R,-r Recurse directories" \
"\n -n Don't change any file labels" \
- "\n -o filename Save list of files with incorrect context" \
+ "\n -o file Save list of files with incorrect context" \
"\n -v Verbose" \
"\n -vv Show changed labels" \
"\n -F Force reset of context to match file_context" \
"[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
" runcon CONTEXT COMMAND [args]"
#define runcon_full_usage \
- "runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
- "runcon CONTEXT COMMAND [args]\n" \
"Run a program in a different security context\n\n" \
" CONTEXT Complete security context\n" \
- " -c, --compute Compute process transition context before modifying\n" \
- " -t, --type=TYPE Type (for same role as parent)\n" \
- " -u, --user=USER User identity\n" \
- " -r, --role=ROLE Role\n" \
- " -l, --range=RNG Levelrange" \
+ USE_GETOPT_LONG( \
+ " -c,--compute Compute process transition context before modifying\n" \
+ " -t,--type=TYPE Type (for same role as parent)\n" \
+ " -u,--user=USER User identity\n" \
+ " -r,--role=ROLE Role\n" \
+ " -l,--range=RNG Levelrange" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -c Compute process transition context before modifying\n" \
+ " -t TYPE Type (for same role as parent)\n" \
+ " -u USER User identity\n" \
+ " -r ROLE Role\n" \
+ " -l RNG Levelrange" \
+ )
#define run_parts_trivial_usage \
"[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
" FIRST LAST\n" \
" FIRST INCREMENT LAST"
+#define sestatus_trivial_usage \
+ "[-vb]"
+#define sestatus_full_usage \
+ "-v Verbose\n" \
+ "-b Display current state of booleans"
+
#define setconsole_trivial_usage \
- "[-r|--reset] [DEVICE]"
+ "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
#define setconsole_full_usage \
"Redirect system console output to DEVICE (default: /dev/tty)" \
"\n\nOptions:\n" \
#define setenforce_full_usage
#define setfiles_trivial_usage \
- "[-dnpqsvW] [-e dir]... [-o filename] [-r alt_root_path]" \
+ "[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \
USE_FEATURE_SETFILES_CHECK_OPTION( \
" [-c policyfile] spec_file" \
) \
"\n -W Display warnings about entries that had no matching files"
#define setkeycodes_trivial_usage \
- "SCANCODE KEYCODE ..."
+ "SCANCODE KEYCODE..."
#define setkeycodes_full_usage \
"Set entries into the kernel's scancode-to-keycode map,\n" \
"allowing unusual keyboards to generate usable keycodes.\n\n" \
#define setlogcons_full_usage \
"Redirect the kernel output to console N (0 for current)"
+#define setsebool_trivial_usage \
+ "boolean value"
+
+#define setsebool_full_usage \
+ "Change boolean setting"
+
#define setsid_trivial_usage \
- "program [arg ...]"
+ "program [arg...]"
#define setsid_full_usage \
"Run any program in a new session by calling setsid() before\n" \
"exec'ing the rest of its arguments. See setsid(2) for details."
"[FILE]...\n" \
"or: sh -c command [args]..."
#define lash_full_usage \
- "The BusyBox LAme SHell (command interpreter)"
-#define lash_notes_usage \
- "This command does not yet have proper documentation.\n\n" \
- "Use lash just as you would use any other shell. It properly handles pipes,\n" \
- "redirects, job control, can be used as the shell for scripts, and has a\n" \
- "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
- "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
- "use ash or bash. If you just need a very simple and extremely small shell,\n" \
- "this will do the job."
+ "lash is deprecated, please use hush"
#define last_trivial_usage \
""
"$ cat TODO | split -a 2 -l 2 TODO_\n"
#define start_stop_daemon_trivial_usage \
- "[OPTIONS] [--start|--stop] ... [-- arguments...]"
+ "[OPTIONS] [" \
+ USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \
+ "] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
"Start and stop services" \
"\n\nOptions:" \
- "\n -S|--start Start" \
- "\n -K|--stop Stop" \
- "\n -a|--startas pathname Starts process specified by pathname" \
- "\n -b|--background Put process into background" \
- "\n -u|--user username|uid Stop this user's processes" \
- "\n -x|--exec executable Program to either start or check" \
- "\n -m|--make-pidfile Create the -p file and enter pid in it" \
- "\n -n|--name process-name Stop processes with this name" \
- "\n -p|--pidfile pid-file Save or load pid using a pid-file" \
- "\n -q|--quiet Quiet" \
+ USE_GETOPT_LONG( \
+ "\n -S,--start Start" \
+ "\n -K,--stop Stop" \
+ "\n -a,--startas pathname Starts process specified by pathname" \
+ "\n -b,--background Put process into background" \
+ "\n -u,--user username|uid Stop this user's processes" \
+ "\n -x,--exec executable Program to either start or check" \
+ "\n -n,--name process-name Stop processes with this name" \
+ "\n -p,--pidfile pid-file Save or load pid using a pid-file" \
+ "\n -m,--make-pidfile Create the -p file and enter pid in it" \
+ "\n -q,--quiet Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o|--oknodo Exit status 0 if nothing done" \
- "\n -v|--verbose Verbose" \
- "\n -N|--nicelevel N Add N to process's nice level" \
+ "\n -o,--oknodo Exit status 0 if nothing done" \
+ "\n -v,--verbose Verbose" \
+ "\n -N,--nicelevel N Add N to process's nice level" \
+ ) \
+ "\n -s,--signal signal Signal to send (default TERM)" \
+ "\n -c,--chuid user[:[grp]] Change to specified user/group" \
) \
- "\n -s|--signal signal Signal to send (default TERM)" \
- "\n -c|--chuid user[:[group]] Change to specified user/group"
+ SKIP_GETOPT_LONG( \
+ "\n -S Start" \
+ "\n -K Stop" \
+ "\n -a pathname Starts process specified by pathname" \
+ "\n -b Put process into background" \
+ "\n -u username|uid Stop this user's processes" \
+ "\n -x executable Program to either start or check" \
+ "\n -n process-name Stop processes with this name" \
+ "\n -p pid-file Save or load pid using a pid-file" \
+ "\n -m Create the -p file and enter pid in it" \
+ "\n -q Quiet" \
+ USE_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o Exit status 0 if nothing done" \
+ "\n -v Verbose" \
+ "\n -N N Add N to process's nice level" \
+ ) \
+ "\n -s signal Signal to send (default TERM)" \
+ "\n -c user[:[grp]] Change to specified user/group" \
+ )
#define stat_trivial_usage \
"[OPTION] FILE..."
)
#define strings_trivial_usage \
- "[-afo] [-n length] [file ...]"
+ "[-afo] [-n length] [file...]"
#define strings_full_usage \
"Display printable strings in a binary file" \
"\n\nOptions:" \
- "\n -a Scan the whole files (this is the default)" \
- "\n -f Precede each string with the name of the file where it was found" \
- "\n -n N Specifies that at least N characters forms a sequence (default 4)" \
- "\n -o Each string is preceded by its decimal offset in the file"
+ "\n -a Scan whole file (default)" \
+ "\n -f Precede strings with filenames" \
+ "\n -n N At least N characters form a string (default 4)" \
+ "\n -o Precede strings with decimal offsets"
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
#define sysctl_full_usage \
"Configure kernel parameters at runtime" \
"\n\nOptions:\n" \
- " -n Use this option to disable printing of the key name when printing values\n" \
- " -w Use this option when you want to change a sysctl setting\n" \
- " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
- " -a Display all values currently available\n" \
- " -A Display all values currently available in table form"
+ " -n Disable printing of key names\n" \
+ " -e Don't warn about unknown keys\n" \
+ " -w Change sysctl setting\n" \
+ " -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)\n" \
+ " -a Display all values\n" \
+ " -A Display all values in table form"
#define sysctl_example_usage \
- "sysctl [-n] variable ...\n" \
- "sysctl [-n] -w variable=value ...\n" \
- "sysctl [-n] -a\n" \
- "sysctl [-n] -p file (default /etc/sysctl.conf)\n" \
- "sysctl [-n] -A\n"
+ "sysctl [-n] [-e] variable...\n" \
+ "sysctl [-n] [-e] -w variable=value...\n" \
+ "sysctl [-n] [-e] -a\n" \
+ "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
+ "sysctl [-n] [-e] -A\n"
#define syslogd_trivial_usage \
"[OPTION]..."
USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
USE_FEATURE_TAR_FROM("[-X FILE] ") \
- "[-f TARFILE] [-C DIR] [FILE(s)] ..."
+ "[-f TARFILE] [-C DIR] [FILE(s)]..."
#define tar_full_usage \
"Create, extract, or list files from a tar file" \
"\n\nOptions:\n" \
"\n\nOptions:" \
"\n -l LOGIN Exec LOGIN on connect" \
"\n -f issue_file Display issue_file instead of /etc/issue" \
+ "\n -K Close connection as soon as login exits" \
+ "\n (normally wait until all programs close slave pty)" \
USE_FEATURE_TELNETD_STANDALONE( \
"\n -p PORT Port to listen to" \
"\n -b ADDR Address to bind to" \
"and show the status for however many processes will fit on the screen."
#define touch_trivial_usage \
- "[-c] FILE [FILE ...]"
+ "[-c] FILE [FILE...]"
#define touch_full_usage \
"Update the last-modified date on the given FILE[s]" \
"\n\nOptions:\n" \
#define udhcpc_trivial_usage \
"[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
- " [-p pidfile] [-r IP] [-s script]"
+ " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..."
#define udhcpc_full_usage \
- " -V,--vendorclass=CLASSID Set vendor class identifier" \
- "\n -i,--interface=INTERFACE Interface to use (default: eth0)" \
+ USE_GETOPT_LONG( \
+ " -V,--vendorclass=CLASSID Vendor class identifier" \
+ "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
"\n -H,-h,--hostname=HOSTNAME Client hostname" \
- "\n -c,--clientid=CLIENTID Set client identifier" \
+ "\n -c,--clientid=CLIENTID Client identifier" \
"\n -C,--clientid-none Suppress default client identifier" \
- "\n -p,--pidfile=file Store process ID of daemon in file" \
+ "\n -p,--pidfile=file Create pidfile" \
"\n -r,--request=IP IP address to request" \
- "\n -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)" \
- "\n -t,--retries=N Send up to N request packets"\
+ "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t,--retries=N Send up to N request packets" \
+ "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \
+ "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
"\n -f,--foreground Run in foreground" \
- "\n -b,--background Background if lease cannot be immediately negotiated" \
+ "\n -b,--background Background if lease is not immediately obtained" \
"\n -S,--syslog Log to syslog too" \
- "\n -n,--now Exit with failure if lease cannot be immediately negotiated" \
+ "\n -n,--now Exit with failure if lease is not immediately obtained" \
"\n -q,--quit Quit after obtaining lease" \
"\n -R,--release Release IP on quit" \
- "\n -v,--version Display version" \
+ "\n -O,--request-option=OPT Request DHCP option OPT from server" \
+ USE_FEATURE_UDHCPC_ARPING( \
+ "\n -a,--arping Use arping to validate offered address" \
+ ) \
+ ) \
+ SKIP_GETOPT_LONG( \
+ " -V CLASSID Vendor class identifier" \
+ "\n -i INTERFACE Interface to use (default: eth0)" \
+ "\n -H,-h HOSTNAME Client hostname" \
+ "\n -c CLIENTID Client identifier" \
+ "\n -C Suppress default client identifier" \
+ "\n -p file Create pidfile" \
+ "\n -r IP IP address to request" \
+ "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t N Send up to N request packets" \
+ "\n -T N Try to get a lease for N seconds (default 3)" \
+ "\n -A N Wait N seconds (default 20) after failure" \
+ "\n -f Run in foreground" \
+ "\n -b Background if lease is not immediately obtained" \
+ "\n -S Log to syslog too" \
+ "\n -n Exit with failure if lease is not immediately obtained" \
+ "\n -q Quit after obtaining lease" \
+ "\n -R Release IP on quit" \
+ "\n -O OPT Request DHCP option OPT from server" \
+ USE_FEATURE_UDHCPC_ARPING( \
+ "\n -a Use arping to validate offered address" \
+ ) \
+ )
#define udhcpd_trivial_usage \
"[-fS] [configfile]" \
"$ umount /dev/hdc1\n"
#define uname_trivial_usage \
- "[OPTION]..."
+ "[-amnrspv]"
#define uname_full_usage \
- "Print certain system information. With no OPTION, same as -s." \
+ "Print system information." \
"\n\nOptions:\n" \
- " -a Print all information\n" \
+ " -a Print all\n" \
" -m The machine (hardware) type\n" \
- " -n Print machine's hostname\n" \
- " -r Print OS release\n" \
- " -s Print OS name\n" \
- " -p Print host processor type\n" \
- " -v Print OS version"
+ " -n Hostname\n" \
+ " -r OS release\n" \
+ " -s OS name (default)\n" \
+ " -p Processor type\n" \
+ " -v OS version"
#define uname_example_usage \
"$ uname -a\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
"Uncompress .Z file[s]" \
"\n\nOptions:\n" \
" -c Extract to stdout\n" \
- " -f Force overwrite an existing file"
+ " -f Overwrite an existing file"
#define unexpand_trivial_usage \
"[-f][-a][-t NUM] [FILE|-]"
#define unexpand_full_usage \
"Convert spaces to tabs, writing to standard output." \
"\n\nOptions:" \
- "\n -a" USE_FEATURE_UNEXPAND_LONG_OPTIONS(",--all") \
- " Convert all blanks" \
- "\n -f" USE_FEATURE_UNEXPAND_LONG_OPTIONS(",--first-only") \
- " Convert only leading sequences of blanks" \
- "\n -t" USE_FEATURE_UNEXPAND_LONG_OPTIONS(",--tabs=N") \
- " Tabstops every N chars"
+ USE_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ "\n -a,--all Convert all blanks" \
+ "\n -f,--first-only Convert only leading blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
+ ) \
+ SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ "\n -a Convert all blanks" \
+ "\n -f Convert only leading blanks" \
+ "\n -t N Tabstops every N chars" \
+ )
#define uniq_trivial_usage \
"[-fscdu]... [INPUT [OUTPUT]]"
"$\n"
#define vconfig_trivial_usage \
- "COMMAND [OPTIONS] ..."
+ "COMMAND [OPTIONS]..."
#define vconfig_full_usage \
"Create and remove virtual ethernet devices" \
"\n\nOptions:\n" \
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
+ USE_GETOPT_LONG( \
"[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
- " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
- " [-U|--user-agent agent] url"
+ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
+ " [-U|--user-agent agent] url" \
+ ) \
+ SKIP_GETOPT_LONG( \
+ "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
+ )
#define wget_full_usage \
"Retrieve files via HTTP or FTP" \
"\n\nOptions:\n" \
" -Y Use proxy ('on' or 'off')"
#define which_trivial_usage \
- "[COMMAND ...]"
+ "[COMMAND...]"
#define which_full_usage \
"Locate a COMMAND"
#define which_example_usage \
"/bin/login\n"
#define who_trivial_usage \
- " "
+ "[-a]"
#define who_full_usage \
- "Print the current user names and related information"
+ "Show who is logged on" \
+ "\n\nOptions:\n" \
+ " -a show all"
#define whoami_trivial_usage \
""
projects / oweals / busybox.git / blobdiff