"$ cat /proc/uptime\n" \
"110716.72 17.67"
+#define catv_trivial_usage \
+ "[-etv] [FILE]..."
+#define catv_full_usage \
+ "Display nonprinting characters as ^x or M-x.\n\n"\
+ "\t-e\tEnd each line with $\n" \
+ "\t-t\tShow tabs as ^I\n" \
+ "\t-v\tDon't use ^x or M-x escapes."
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
"\t-l num\tlog level (8 - default)\n" \
"\t-S\tlog to syslogd (default)\n" \
"\t-L file\tlog to file\n" \
- "\t-f\trun in fordeground\n" \
+ "\t-f\trun in foreground\n" \
"\t-b\trun in background (default)\n" \
"\t-c dir\tworking dir"
"\t-i\t\tInstall the package\n" \
"\t-l\t\tList of installed packages\n" \
"\t-C\t\tConfigure an unpackaged package\n" \
- "\t-F depends\tIgnore depency problems\n" \
+ "\t-F depends\tIgnore dependency problems\n" \
"\t-P\t\tPurge all files of a package\n" \
"\t-r\t\tRemove all but the configuration files for a package\n" \
"\t-u\t\tUnpack a package, but don't configure it"
"Displays the DHCP leases granted by udhcpd.\n\n" \
"Options:\n" \
"\t-f,\t--file=FILENAME\tLeases file to load\n" \
- "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \
+ "\t-r,\t--remaining\tInterpret lease times as time remaining\n" \
"\t-a,\t--absolute\tInterpret lease times as expire time"
#define e2fsck_trivial_usage \
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage \
- "Options:" \
+ USE_FEATURE_HDPARM_GET_IDENTITY("\tIf no device name is specified try to read from stdin.\n") \
+ "\nOptions:\n" \
"\t-a get/set fs readahead\n" \
"\t-A set drive read-lookahead flag (0/1)\n" \
"\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
"\t-f flush buffer cache for device on exit\n" \
"\t-g display drive geometry\n" \
"\t-h display terse usage information\n" \
- "\t-i display drive identification\n" \
+ USE_FEATURE_HDPARM_GET_IDENTITY("\t-i display drive identification\n") \
USE_FEATURE_HDPARM_GET_IDENTITY("\t-I detailed/current information directly from drive\n") \
- USE_FEATURE_HDPARM_GET_IDENTITY("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
"\t-k get/set keep_settings_over_reset flag (0/1)\n" \
"\t-K set drive keep_features_over_reset flag (0/1)\n" \
"\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
"The upper-case options MQS are used to remove a shared memory\n" \
"segment by an shmkey value. The lower-case options mqs are used\n" \
"to remove a segment by shmid value.\n" \
- "\t-m | -M\tRemove the memory segment after the last detatch\n" \
+ "\t-m | -M\tRemove the memory segment after the last detach\n" \
"\t-q | -Q\tRemove the message queue\n" \
"\t-s | -S\tRemove the semaphore"
"Resource specification:\n" \
"\t-m\tshared memory segments\n" \
"\t-q\tmessage queues\n" \
- "\t-s\tsempahore arrays\n" \
+ "\t-s\tsemaphore arrays\n" \
"\t-a\tall (default)\n" \
"Output format:\n" \
"\t-t\ttime\n" \
"\n" \
" alias <alias_name> <mod_name>\n" \
" Makes it possible to modprobe alias_name, when there is no such module.\n" \
-" It makes sense if your mod_name is long, or you want a more reprenstative\n" \
+" It makes sense if your mod_name is long, or you want a more representative\n" \
" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
" This makes it also possible to use a different set of options (below) for\n" \
" the module and the alias.\n" \
" which are the default for alias 'tulip2'\n\n" \
"$ modprobe tulip2 irq=8\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
- " which are the default for alias 'tulip2' overriden by the option 'irq=8'\n\n" \
+ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
" from the command line\n\n" \
"$ modprobe tulip2 irq=2 io=0x210\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
- " which are the default for alias 'tulip2' overriden by the options 'irq=2 io=0x210'\n\n" \
+ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
" from the command line\n"
#define more_trivial_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
+#define taskset_trivial_usage \
+ "[OPTIONS] [mask] [pid | command [arg]...]"
+#define taskset_full_usage \
+ "Set or get CPU affinity.\n\n" \
+ "Options:\n" \
+ "\t-p\toperate on an existing PID"
+#define taskset_example_usage \
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n"
+ "pid 1's current affinity mask: 3\n"
+
#define tee_trivial_usage \
"[OPTION]... [FILE]..."
#define tee_full_usage \
"Executes COMMAND on every item given by standard input.\n\n" \
"Options:\n" \
USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
- "\t-r\tDo not run command for empty readed lines\n" \
+ "\t-r\tDo not run command for empty read lines\n" \
USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
"\t-t\tPrint the command line on stderr before executing it"
projects / oweals / busybox.git / blobdiff