"$ cat /proc/uptime\n" \
"110716.72 17.67"
+#define catv_trivial_usage \
+ "[-etv] [FILE]..."
+#define catv_full_usage \
+ "Display nonprinting characters as ^x or M-x.\n\n"\
+ "\t-e\tEnd each line with $\n" \
+ "\t-t\tShow tabs as ^I\n" \
+ "\t-v\tDon't use ^x or M-x escapes."
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
"\t-l num\tlog level (8 - default)\n" \
"\t-S\tlog to syslogd (default)\n" \
"\t-L file\tlog to file\n" \
- "\t-f\trun in fordeground\n" \
+ "\t-f\trun in foreground\n" \
"\t-b\trun in background (default)\n" \
"\t-c dir\tworking dir"
"64\n"
#define dd_trivial_usage \
- "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
- "\t [seek=N] [conv=notrunc|noerror|sync]"
+ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
+ "\t [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
#define dd_full_usage \
"Copy a file, converting and formatting according to options\n\n" \
"\tif=FILE\t\tread from FILE instead of stdin\n" \
"\tof=FILE\t\twrite to FILE instead of stdout\n" \
"\tbs=N\t\tread and write N bytes at a time\n" \
+ USE_FEATURE_DD_IBS_OBS("\tibs=N\t\tread N bytes at a time\n") \
+ USE_FEATURE_DD_IBS_OBS("\tobs=N\t\twrite N bytes at a time\n") \
"\tcount=N\t\tcopy only N input blocks\n" \
"\tskip=N\t\tskip N input blocks\n" \
"\tseek=N\t\tskip N output blocks\n" \
- "\tconv=notrunc\tdon't truncate output file\n" \
- "\tconv=noerror\tcontinue after read errors\n" \
- "\tconv=sync\tpad blocks with zeros\n" \
+ USE_FEATURE_DD_IBS_OBS( \
+ "\tconv=notrunc\tdon't truncate output file\n" \
+ "\tconv=noerror\tcontinue after read errors\n" \
+ "\tconv=sync\tpad blocks with zeros\n" \
+ ) \
"\n" \
"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
"MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
"\t-i\t\tInstall the package\n" \
"\t-l\t\tList of installed packages\n" \
"\t-C\t\tConfigure an unpackaged package\n" \
- "\t-F depends\tIgnore depency problems\n" \
+ "\t-F depends\tIgnore dependency problems\n" \
"\t-P\t\tPurge all files of a package\n" \
"\t-r\t\tRemove all but the configuration files for a package\n" \
"\t-u\t\tUnpack a package, but don't configure it"
"Displays the DHCP leases granted by udhcpd.\n\n" \
"Options:\n" \
"\t-f,\t--file=FILENAME\tLeases file to load\n" \
- "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \
+ "\t-r,\t--remaining\tInterpret lease times as time remaining\n" \
"\t-a,\t--absolute\tInterpret lease times as expire time"
#define e2fsck_trivial_usage \
"Options:\n" \
"\t-t\tclose tray"
+#define ed_trivial_usage ""
+#define ed_full_usage ""
+
#define env_trivial_usage \
"[-iu] [-] [name=value]... [command]"
#define env_full_usage \
"\t-follow\t\tDereference symbolic links\n" \
"\t-name PATTERN\tFile name (leading directories removed) matches PATTERN\n" \
"\t-print\t\tPrint (default and assumed)\n" \
- USE_FEATURE_FIND_TYPE( \
+ USE_FEATURE_FIND_PRINT0( \
+ "\t-print0\t\tDelimit output with null characters rather than\n\t\t\tnewlines" \
+) USE_FEATURE_FIND_TYPE( \
"\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
) USE_FEATURE_FIND_PERM( \
"\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
"\t-n\t\tno call to sync()\n" \
"\t-f\t\tforce halt (don't go through init)"
-#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
-#define USAGE_SCAN_HWIF(a) a
-#else
-#define USAGE_SCAN_HWIF(a)
-#endif
-
-#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
-#define USAGE_UNREGISTER_HWIF(a) a
-#else
-#define USAGE_UNREGISTER_HWIF(a)
-#endif
-
-#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
-#define USAGE_DRIVE_RESET(a) a
-#else
-#define USAGE_DRIVE_RESET(a)
-#endif
-
-#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
-#define USAGE_TRISTATE_HWIF(a) a
-#else
-#define USAGE_TRISTATE_HWIF(a)
-#endif
-
-#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
-#define USAGE_GETSET_DMA(a) a
-#else
-#define USAGE_GETSET_DMA(a)
-#endif
-
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage \
- "Options:" \
+ USE_FEATURE_HDPARM_GET_IDENTITY("\tIf no device name is specified try to read from stdin.\n") \
+ "\nOptions:\n" \
"\t-a get/set fs readahead\n" \
"\t-A set drive read-lookahead flag (0/1)\n" \
"\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
"\t-B set Advanced Power Management setting (1-255)\n" \
"\t-c get/set IDE 32-bit IO setting\n" \
"\t-C check IDE power mode status\n" \
- USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \
+ USE_FEATURE_HDPARM_HDIO_GETSET_DMA("\t-d get/set using_dma flag\n") \
"\t-D enable/disable drive defect-mgmt\n" \
"\t-f flush buffer cache for device on exit\n" \
"\t-g display drive geometry\n" \
"\t-h display terse usage information\n" \
- "\t-i display drive identification\n" \
+ USE_FEATURE_HDPARM_GET_IDENTITY("\t-i display drive identification\n") \
USE_FEATURE_HDPARM_GET_IDENTITY("\t-I detailed/current information directly from drive\n") \
- USE_FEATURE_HDPARM_GET_IDENTITY("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
"\t-k get/set keep_settings_over_reset flag (0/1)\n" \
"\t-K set drive keep_features_over_reset flag (0/1)\n" \
"\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
"\t-q change next setting quietly\n" \
"\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
"\t-r get/set readonly flag (DANGEROUS to set)\n" \
- USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
+ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
"\t-S set standby (spindown) timeout\n" \
"\t-t perform device read timings\n" \
"\t-T perform cache read timings\n" \
"\t-u get/set unmaskirq flag (0/1)\n" \
- USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
+ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
"\t-v defaults; same as -mcudkrag for IDE drives\n" \
"\t-V display program version and exit immediately\n" \
- USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
+ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
"\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
- USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
"\t-X set IDE xfer mode (DANGEROUS)\n" \
"\t-y put IDE drive in standby mode\n" \
"\t-Y put IDE drive to sleep\n" \
"\t-Z disable Seagate auto-powersaving mode\n" \
"\t-z re-read partition table"
-#ifdef CONFIG_FEATURE_FANCY_HEAD
-#define USAGE_FANCY_HEAD(a) a
-#else
-#define USAGE_FANCY_HEAD(a)
-#endif
-
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage \
"file name. With no FILE, or when FILE is -, read standard input.\n\n" \
"Options:\n" \
"\t-n NUM\t\tPrint first NUM lines instead of first 10" \
- USAGE_FANCY_HEAD( \
+ USE_FEATURE_FANCY_HEAD( \
"\n\t-c NUM\t\toutput the first NUM bytes\n" \
"\t-q\t\tnever output headers giving file names\n" \
"\t-v\t\talways output headers giving file names" )
"$ hostname\n" \
"sage\n"
-#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
-# define USAGE_HTTPD_BASIC_AUTH(a) a
-# ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
-# define USAGE_HTTPD_AUTH_MD5(a) a
-# else
-# define USAGE_HTTPD_AUTH_MD5(a)
-# endif
-#else
-# define USAGE_HTTPD_BASIC_AUTH(a)
-# define USAGE_HTTPD_AUTH_MD5(a)
-#endif
-#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-# define USAGE_HTTPD_STANDALONE(a)
-# define USAGE_HTTPD_SETUID(a)
-#else
-# define USAGE_HTTPD_STANDALONE(a) a
-# ifdef CONFIG_FEATURE_HTTPD_SETUID
-# define USAGE_HTTPD_SETUID(a) a
-# else
-# define USAGE_HTTPD_SETUID(a)
-# endif
-#endif
#define httpd_trivial_usage \
"[-c <conf file>]" \
- USAGE_HTTPD_STANDALONE(" [-p <port>]") \
- USAGE_HTTPD_SETUID(" [-u user]") \
- USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
- USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
+ USE_FEATURE_HTTPD_WITHOUT_INETD(" [-p <port>]") \
+ USE_FEATURE_HTTPD_SETUID(" [-u user]") \
+ USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
+ USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
" [-h home]" \
" [-d/-e <string>]"
#define httpd_full_usage \
"Listens for incoming http server requests.\n\n" \
"Options:\n" \
"\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
- USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
- USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \
- USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
- USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
+ USE_FEATURE_HTTPD_WITHOUT_INETD("\t-p PORT\tServer port (default 80)\n") \
+ USE_FEATURE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \
+ USE_FEATURE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
+ USE_FEATURE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
"\t-h HOME \tSpecifies http HOME directory (default ./)\n" \
"\t-e STRING\tHtml encode STRING\n" \
"\t-d STRING\tURL decode STRING"
#define ifconfig_full_usage \
"configure a network interface\n\n" \
"Options:\n" \
- USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
- USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
+ USAGE_IPV6("\t[add <address>[/<prefixlen>]]\n") \
+ USAGE_IPV6("\t[del <address>[/<prefixlen>]]\n") \
"\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
"\t[netmask <address>] [dstaddr <address>]\n" \
USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
"The upper-case options MQS are used to remove a shared memory\n" \
"segment by an shmkey value. The lower-case options mqs are used\n" \
"to remove a segment by shmid value.\n" \
- "\t-m | -M\tRemove the memory segment after the last detatch\n" \
+ "\t-m | -M\tRemove the memory segment after the last detach\n" \
"\t-q | -Q\tRemove the message queue\n" \
"\t-s | -S\tRemove the semaphore"
"Resource specification:\n" \
"\t-m\tshared memory segments\n" \
"\t-q\tmessage queues\n" \
- "\t-s\tsempahore arrays\n" \
+ "\t-s\tsemaphore arrays\n" \
"\t-a\tall (default)\n" \
"Output format:\n" \
"\t-t\ttime\n" \
"\n" \
" alias <alias_name> <mod_name>\n" \
" Makes it possible to modprobe alias_name, when there is no such module.\n" \
-" It makes sense if your mod_name is long, or you want a more reprenstative\n" \
+" It makes sense if your mod_name is long, or you want a more representative\n" \
" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
" This makes it also possible to use a different set of options (below) for\n" \
" the module and the alias.\n" \
" which are the default for alias 'tulip2'\n\n" \
"$ modprobe tulip2 irq=8\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
- " which are the default for alias 'tulip2' overriden by the option 'irq=8'\n\n" \
+ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
" from the command line\n\n" \
"$ modprobe tulip2 irq=2 io=0x210\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
- " which are the default for alias 'tulip2' overriden by the options 'irq=2 io=0x210'\n\n" \
+ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
" from the command line\n"
#define more_trivial_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
+#define taskset_trivial_usage \
+ "[OPTIONS] [mask] [pid | command [arg]...]"
+#define taskset_full_usage \
+ "Set or get CPU affinity.\n\n" \
+ "Options:\n" \
+ "\t-p\toperate on an existing PID"
+#define taskset_example_usage \
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n"
+ "pid 1's current affinity mask: 3\n"
+
#define tee_trivial_usage \
"[OPTION]... [FILE]..."
#define tee_full_usage \
"Executes COMMAND on every item given by standard input.\n\n" \
"Options:\n" \
USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
- "\t-r\tDo not run command for empty readed lines\n" \
+ "\t-r\tDo not run command for empty read lines\n" \
USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
"\t-t\tPrint the command line on stderr before executing it"