+#ifndef __BB_USAGE_H__
+#define __BB_USAGE_H__
+
#define addgroup_trivial_usage \
- "[OPTIONS] <group_name>"
+ "[-g GID] group_name [user_name]"
#define addgroup_full_usage \
"Adds a group to the system" \
"Options:\n" \
- "\t-g\t\tspecify gid\n"
+ "\t-g GID\t\tspecify gid"
#define adduser_trivial_usage \
- "[OPTIONS] <user_name>"
+ "[OPTIONS] user_name"
#define adduser_full_usage \
"Adds a user to the system" \
"Options:\n" \
- "\t-h\t\thome directory\n" \
- "\t-s\t\tshell\n" \
- "\t-g\t\tGECOS string\n"
+ "\t-h DIR\t\tAssign home directory DIR\n" \
+ "\t-g GECOS\tAssign gecos field GECOS\n" \
+ "\t-s SHELL\tAssign login shell SHELL\n" \
+ "\t-G\t\tAdd the user to existing group GROUP\n" \
+ "\t-S\t\tcreate a system user (ignored)\n" \
+ "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
+ "\t-H\t\tDo not create the home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
"\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
"\t\t\t(positive values make the system clock run fast)\n" \
"\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
- "\t-p timeconstant\n"
+ "\t-p timeconstant"
#define ar_trivial_usage \
- "-[ov][ptx] ARCHIVE FILES"
+ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
"Extract or list FILES from an ar archive.\n\n" \
"Options:\n" \
"\t-p\t\textract to stdout\n" \
"\t-t\t\tlist\n" \
"\t-x\t\textract\n" \
- "\t-v\t\tverbosely list files processed\n"
+ "\t-v\t\tverbosely list files processed"
+
+#define arping_trivial_usage \
+ "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
+#define arping_full_usage \
+ "Ping hosts by ARP requests/replies.\n\n" \
+ "Options:\n" \
+ "\t-f\t\tQuit on first ARP reply\n" \
+ "\t-q\t\tBe quiet\n" \
+ "\t-b\t\tKeep broadcasting, don't go unicast\n" \
+ "\t-D\t\tDuplicated address detection mode\n" \
+ "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
+ "\t-A\t\tARP answer mode, update your neighbours\n" \
+ "\t-c count\tStop after sending count ARP request packets\n" \
+ "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
+ "\t-I device\tOutgoing interface name, default is eth0\n" \
+ "\t-s sender\tSet specific sender IP address\n" \
+ "\ttarget\t\tTarget IP address of ARP request"
+
+#define ash_trivial_usage \
+ "[FILE]...\n" \
+ "or: ash -c command [args]...\n"
+#define ash_full_usage \
+ "The ash shell (command interpreter)"
-#define awk_trivial_usage \
- "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]"
-#define awk_full_usage \
+#define awk_trivial_usage \
+ "[OPTION]... [program-text] [FILE ...]"
+#define awk_full_usage \
"Options:\n" \
- "\t-v var=val\tassign value 'val' to variable 'var'\n" \
+ "\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
"\t-F sep\t\tuse 'sep' as field separator\n" \
- "\t-f progname\tread program source from file 'progname'\n"
+ "\t-f progname\t\tread program source from file 'progname'"
#define basename_trivial_usage \
"FILE [SUFFIX]"
"\t-y\tDisplay the entire year."
#define cat_trivial_usage \
- "[FILE]..."
+ "[-u] [FILE]..."
#define cat_full_usage \
- "Concatenates FILE(s) and prints them to stdout."
+ "Concatenates FILE(s) and prints them to stdout.\n\n" \
+ "Options:\n" \
+ "\t-u\tignored since unbuffered i/o is always used"
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
- "$ mount /dev/hdc1 /mnt -t minix\n" \
- "$ chroot /mnt\n" \
- "$ ls -l /bin/ls\n" \
+ "# mount /dev/hdc1 /mnt -t minix\n" \
+ "# chroot /mnt\n" \
+ "# ls -l /bin/ls\n" \
"-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
"Clear screen."
#define cmp_trivial_usage \
- "FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2]"
#define cmp_full_usage \
- "\t-s\tquiet mode - do not print\n" \
- "Compare files."
+ "Compare files. Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
+ "Options:\n" \
+ "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
+ "\t\t for all differing bytes.\n" \
+ "\t-s\tquiet mode - do not print"
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
"\t-d\tPreserves links\n" \
"\t-p\tPreserves file attributes if possible\n" \
"\t-f\tforce (implied; ignored) - always set\n" \
- "\t-R\tCopies directories recursively"
+ "\t-i\tinteractive, prompt before overwrite\n" \
+ "\t-R,-r\tCopies directories recursively"
#define cpio_trivial_usage \
"-[dimtuv][F cpiofile]"
"\tt\t\tlist\n" \
"\tu\t\tunconditional overwrite\n" \
"\tF\t\tinput from file"
-
+
#define crond_trivial_usage \
"-d[#] -c <crondir> -f -b"
#define crond_full_usage \
"\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
"\t-d num\tdebug level\n" \
"\t-l num\tlog level (8 - default)\n" \
- "\t-S\tlog to syslod (defualt)\n" \
+ "\t-S\tlog to syslod (default)\n" \
"\t-L file\tlog to file\n" \
"\t-f\trun in fordeground\n" \
"\t-b\trun in background (default)\n" \
"\t-c dir\tworking dir"
#define crontab_trivial_usage \
- "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]"
+ "[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
"\tfile <opts> replace crontab from file\n" \
"\t- <opts> replace crontab from stdin\n" \
"$ echo "Hello world" | cut -f 2 -d ' '\n" \
"world\n"
+#ifdef CONFIG_FEATURE_DATE_ISOFMT
+#define USAGE_DATE_ISOFMT(a) a
+#else
+#define USAGE_DATE_ISOFMT(a)
+#endif
+
#define date_trivial_usage \
- "[OPTION]... [+FORMAT]"
+ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
"Displays the current time in the given FORMAT, or sets the system date.\n" \
"\nOptions:\n" \
"\t-R\t\tOutputs RFC-822 compliant date string\n" \
- "\t-d STRING\tdisplay time described by STRING, not `now'\n" \
+ "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
+ USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
+ "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
+ "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
+ "\t\t\ttime to the indicated precision.\n") \
"\t-s\t\tSets time described by STRING\n" \
"\t-u\t\tPrints or sets Coordinated Universal Time"
#define date_example_usage \
"expression ..."
#define dc_full_usage \
"This is a Tiny RPN calculator that understands the\n" \
- "following operations: +, -, /, *, and, or, not, eor.\n" \
- "i.e., 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16"
+ "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
+ "**, exp, and, or, not, eor.\n" \
+ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
+ "\nOptions:\n" \
+ "p - Prints the value on the top of the stack, without altering the stack.\n" \
+ "f - Prints the entire contents of the stack without altering anything.\n" \
+ "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
+ " Only 10 and 16 are supported."
#define dc_example_usage \
"$ dc 2 2 +\n" \
"4\n" \
"4+0 records out\n"
#define deallocvt_trivial_usage \
- "N"
+ "[N]"
#define deallocvt_full_usage \
"Deallocate unused virtual terminal /dev/ttyN"
#define deluser_full_usage \
"Deletes user USER from the system"
+#ifdef CONFIG_DEVFSD_FG_NP
+ #define USAGE_DEVFSD_FG_NP(a) a
+#else
+ #define USAGE_DEVFSD_FG_NP(a)
+#endif
+
+#define devfsd_trivial_usage \
+ "mntpnt [-v]"\
+ USAGE_DEVFSD_FG_NP("[-fg][-np]" )
+#define devfsd_full_usage \
+ "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
+ "\nOptions:\n" \
+ "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
+ "\t-v\tPrint the protocol version numbers for devfsd\n" \
+ "\t\tand the kernel-side protocol version and exits." \
+ USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
+ "\t-np\tExit after parsing the configuration file\n" \
+ "\t\tand processing synthetic REGISTER events.\n" \
+ "\t\tDo not poll for events.")
+
#ifdef CONFIG_FEATURE_HUMAN_READABLE
#define USAGE_HUMAN_READABLE(a) a
#define USAGE_NOT_HUMAN_READABLE(a)
#else
- #define USAGE_HUMAN_READABLE(a)
+ #define USAGE_HUMAN_READABLE(a)
#define USAGE_NOT_HUMAN_READABLE(a) a
#endif
#define df_trivial_usage \
"/dev/sda3 8690864 8553540 137324 98% /\n"
#define dirname_trivial_usage \
- "[FILENAME ...]"
+ "FILENAME"
#define dirname_full_usage \
"Strips non-directory suffix from FILENAME"
#define dirname_example_usage \
"\t-d\toutput will be in DOS format"
#define dpkg_trivial_usage \
- "-i package_file\n" \
- "[-CPru] package_name"
+ "[-iCPru] package_name"
#define dpkg_full_usage \
+ "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
+ "Options:\n" \
"\t-i\tInstall the package\n" \
"\t-C\tConfigure an unpackaged package\n" \
"\t-P\tPurge all files of a package\n" \
"\t-r\tRemove all but the configuration files for a package\n" \
- "\t-u\tUnpack a package, but dont configure it\n"
+ "\t-u\tUnpack a package, but dont configure it"
#define dpkg_deb_trivial_usage \
"[-cefItxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on debian packages (.debs)\n\n" \
+ "Perform actions on Debian packages (.debs)\n\n" \
"Options:\n" \
"\t-c\tList contents of filesystem tree\n" \
"\t-e\tExtract control files to [argument] directory\n" \
#define dpkg_deb_example_usage \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
+#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
+#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
+#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
+#else
+#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
+#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
+#endif
+
#define du_trivial_usage \
- "[-lsx" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILE]..."
+ "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
#define du_full_usage \
"Summarizes disk space used for each FILE and/or directory.\n" \
- "Disk space is printed in units of 1024 bytes.\n\n" \
- "Options:\n" \
+ "Disk space is printed in units of " \
+ USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
+ " bytes.\n\n" \
+ "Options:\n" \
+ "\t-a\tshow sizes of files in addition to directories\n" \
+ "\t-H\tfollow symbolic links that are FILE command line args\n" \
+ "\t-L\tfollow all symbolic links encountered\n" \
+ "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
+ "\t-c\toutput a grand total\n" \
"\t-l\tcount sizes many times if hard linked\n" \
- "\t-s\tdisplay only a total for each argument" \
- USAGE_HUMAN_READABLE( \
- "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
- "\t-m\tprint sizes in megabytes\n" \
+ "\t-s\tdisplay only a total for each argument\n" \
"\t-x\tskip directories on different filesystems\n" \
- "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
- "\n\t-k\tprint sizes in kilobytes(compatibility)")
+ USAGE_HUMAN_READABLE( \
+ "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ "\t-m\tprint sizes in megabytes\n" ) \
+ "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
#define du_example_usage \
"$ du\n" \
"16 ./CVS\n" \
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
- "Usage: dumpleases -f <file> -[r|a]\n" \
+ "Displays the DHCP leases granted by udhcpd.\n\n" \
+ "Options:\n" \
"\t-f,\t--file=FILENAME\tLeases file to load\n" \
"\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
- "\t-a,\t--absolute\tInterepret lease times as expire time\n"
-
-#define dutmp_trivial_usage \
- "[FILE]"
-#define dutmp_full_usage \
- "Dump utmp file format (pipe delimited) from FILE\n" \
- "or stdin to stdout. (i.e., 'dutmp /var/run/utmp')"
-#define dutmp_example_usage \
- "$ dutmp /var/run/utmp\n" \
- "8|7||si|||0|0|0|955637625|760097|0\n" \
- "2|0|~|~~|reboot||0|0|0|955637625|782235|0\n" \
- "1|20020|~|~~|runlevel||0|0|0|955637625|800089|0\n" \
- "8|125||l4|||0|0|0|955637629|998367|0\n" \
- "6|245|tty1|1|LOGIN||0|0|0|955637630|998974|0\n" \
- "6|246|tty2|2|LOGIN||0|0|0|955637630|999498|0\n" \
- "7|336|pts/0|vt00andersen|andersen|:0.0|0|0|0|955637763|0|0\n"
+ "\t-a,\t--absolute\tInterepret lease times as expire time"
+
+#ifdef CONFIG_FEATURE_FANCY_ECHO
+ #define USAGE_FANCY_ECHO(a) a
+#else
+ #define USAGE_FANCY_ECHO(a)
+#endif
#define echo_trivial_usage \
- "[-neE] [ARG ...]"
+ USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
"Prints the specified ARGs to stdout\n\n" \
- "Options:\n" \
+ USAGE_FANCY_ECHO("Options:\n" \
"\t-n\tsuppress trailing newline\n" \
"\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
- "\t-E\tdisable interpretation of backslash-escaped characters"
+ "\t-E\tdisable interpretation of backslash-escaped characters")
#define echo_example_usage \
"$ echo "Erik is cool"\n" \
"Erik is cool\n" \
- "$ echo -e "Erik\\nis\\ncool"\n" \
+ USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
"$ echo "Erik\\nis\\ncool"\n" \
- "Erik\\nis\\ncool\n"
+ "Erik\\nis\\ncool\n")
#define env_trivial_usage \
"[-iu] [-] [name=value]... [command]"
"up the specified environment.\n\n" \
"Options:\n" \
"\t-, -i\tstart with an empty environment\n" \
- "\t-u\tremove variable from the environment\n"
+ "\t-u\tremove variable from the environment"
#define expr_trivial_usage \
"EXPRESSION"
#define fdflush_full_usage \
"Forces floppy disk drive to detect disk change"
+#define fdformat_trivial_usage \
+ "[-n] DEVICE"
+#define fdformat_full_usage \
+ "Low-level formats a floppy disk\n\n" \
+ "Options:\n" \
+ "\t-n\tDon't verify after format"
+
#define fdisk_trivial_usage \
"[-l] [-v] [-b SSZ] [-u] DISK"
#define fdisk_full_usage \
"Change partition table\n" \
"Options:\n" \
- "-l List partition table(s)\n" \
- "-u Give Start and End in sector (instead of cylinder) units\n" \
- "-s PARTITION Give partition size(s) in blocks\n" \
- "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
- "-v Give fdisk version"
+ "\t-l List partition table(s)\n" \
+ "\t-u Give Start and End in sector (instead of cylinder) units\n" \
+ "\t-s PARTITION Give partition size(s) in blocks\n" \
+ "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
+ "\t-v Give fdisk version"
#ifdef CONFIG_FEATURE_FIND_TYPE
#define USAGE_FIND_TYPE(a) a
#else
#define USAGE_FIND_MTIME(a)
#endif
+#ifdef CONFIG_FEATURE_FIND_NEWER
+ #define USAGE_FIND_NEWER(a) a
+#else
+ #define USAGE_FIND_NEWER(a)
+#endif
+#ifdef CONFIG_FEATURE_FIND_INUM
+ #define USAGE_FIND_INUM(a) a
+#else
+ #define USAGE_FIND_INUM(a)
+#endif
#define find_trivial_usage \
"[PATH...] [EXPRESSION]"
) USAGE_FIND_PERM( \
"\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
) USAGE_FIND_MTIME( \
- "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days")
+ "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
+) USAGE_FIND_NEWER( \
+ "\n\t-newer FILE\tModified time is more recent than FILE's" \
+) USAGE_FIND_INUM( \
+ "\n\t-inum N\t\tFile has inode number N")
#define find_example_usage \
- "$ find / -name /etc/passwd\n" \
+ "$ find / -name passwd\n" \
"/etc/passwd\n"
+#define fold_trivial_usage \
+ "[-bsw] [FILE]"
+#define fold_full_usage \
+ "Wrap input lines in each FILE (standard input by default), writing to\n" \
+ "standard output.\n\n" \
+ "Options:\n" \
+ "\t-b\tcount bytes rather than columns\n" \
+ "\t-s\tbreak at spaces\n" \
+ "\t-w\tuse WIDTH columns instead of 80"
+
#define free_trivial_usage \
""
#define free_full_usage \
"\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
"\t-f\tForce file system check."
+#define ftpget_trivial_usage \
+ "[options] remote-host local-file remote-file"
+#define ftpget_full_usage \
+ "Retrieve a remote file via FTP.\n\n" \
+ "Options:\n" \
+ "\t-c, --continue Continue a previous transfer\n" \
+ "\t-v, --verbose Verbose\n" \
+ "\t-u, --username Username to be used\n" \
+ "\t-p, --password Password to be used\n" \
+ "\t-P, --port Port number to be used"
+
+#define ftpput_trivial_usage \
+ "[options] remote-host remote-file local-file"
+#define ftpput_full_usage \
+ "Store a local file on a remote machine via FTP.\n\n" \
+ "Options:\n" \
+ "\t-v, --verbose Verbose\n" \
+ "\t-u, --username Username to be used\n" \
+ "\t-p, --password Password to be used\n" \
+ "\t-P, --port Port number to be used"
+
#define getopt_trivial_usage \
"[OPTIONS]..."
#define getopt_full_usage \
"done\n"
#define getty_trivial_usage \
- "getty [OPTIONS]... baud_rate,... line [termtype]"
+ "[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
- "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \
+ "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
"Options:\n" \
"\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
"\t-i\t\tDo not display /etc/issue before running login.\n" \
"\t-L\t\tLocal line, so do not do carrier detect.\n" \
"\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
"\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
+ "\t-n\t\tDo not prompt the user for a login name.\n" \
+ "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
"\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
"\t-t timeout\tTerminate after timeout if no username is read.\n" \
"\t-I initstring\tSets the init string to send before anything else.\n" \
#define halt_full_usage \
"Halt the system."
+#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
+#define USAGE_HDPARM_IDENT(a) a
+#else
+#define USAGE_HDPARM_IDENT(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
+#define USAGE_SCAN_HWIF(a) a
+#else
+#define USAGE_SCAN_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
+#define USAGE_UNREGISTER_HWIF(a) a
+#else
+#define USAGE_UNREGISTER_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
+#define USAGE_DRIVE_RESET(a) a
+#else
+#define USAGE_DRIVE_RESET(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
+#define USAGE_TRISTATE_HWIF(a) a
+#else
+#define USAGE_TRISTATE_HWIF(a)
+#endif
+
+#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
+#define USAGE_GETSET_DMA(a) a
+#else
+#define USAGE_GETSET_DMA(a)
+#endif
+
+#define hdparm_trivial_usage \
+ "[options] [device] .."
+#define hdparm_full_usage \
+ "Options:" \
+ "\t-a get/set fs readahead\n" \
+ "\t-A set drive read-lookahead flag (0/1)\n" \
+ "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ "\t-B set Advanced Power Management setting (1-255)\n" \
+ "\t-c get/set IDE 32-bit IO setting\n" \
+ "\t-C check IDE power mode status\n" \
+ USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \
+ "\t-D enable/disable drive defect-mgmt\n" \
+ "\t-f flush buffer cache for device on exit\n" \
+ "\t-g display drive geometry\n" \
+ "\t-h display terse usage information\n" \
+ "\t-i display drive identification\n" \
+ USAGE_HDPARM_IDENT("\t-I detailed/current information directly from drive\n") \
+ USAGE_HDPARM_IDENT("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
+ "\t-k get/set keep_settings_over_reset flag (0/1)\n" \
+ "\t-K set drive keep_features_over_reset flag (0/1)\n" \
+ "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
+ "\t-m get/set multiple sector count\n" \
+ "\t-n get/set ignore-write-errors flag (0/1)\n" \
+ "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ "\t-P set drive prefetch count\n" \
+ "\t-q change next setting quietly\n" \
+ "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
+ "\t-r get/set readonly flag (DANGEROUS to set)\n" \
+ USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
+ "\t-S set standby (spindown) timeout\n" \
+ "\t-t perform device read timings\n" \
+ "\t-T perform cache read timings\n" \
+ "\t-u get/set unmaskirq flag (0/1)\n" \
+ USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
+ "\t-v defaults; same as -mcudkrag for IDE drives\n" \
+ "\t-V display program version and exit immediately\n" \
+ USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
+ "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ "\t-X set IDE xfer mode (DANGEROUS)\n" \
+ "\t-y put IDE drive in standby mode\n" \
+ "\t-Y put IDE drive to sleep\n" \
+ "\t-Z disable Seagate auto-powersaving mode\n" \
+ "\t-z re-read partition table"
+
+#ifdef CONFIG_FEATURE_FANCY_HEAD
+#define USAGE_FANCY_HEAD(a) a
+#else
+#define USAGE_FANCY_HEAD(a)
+#endif
+
#define head_trivial_usage \
- "[OPTION] [FILE]..."
+ "[OPTION]... [FILE]..."
#define head_full_usage \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
"file name. With no FILE, or when FILE is -, read standard input.\n\n" \
"Options:\n" \
- "\t-n NUM\t\tPrint first NUM lines instead of first 10"
+ "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
+ USAGE_FANCY_HEAD( \
+ "\n\t-c NUM\t\toutput the first NUM bytes\n" \
+ "\t-q\t\tnever output headers giving file names\n" \
+ "\t-v\t\talways output headers giving file names" )
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"\t-o\t\tTwo-byte octal display\n" \
"\t-s OFFSET\tSkip offset byte\n" \
"\t-v\t\tdisplay all input data\n" \
- "\t-x\t\tTwo-byte hexadecimal display\n"
+ "\t-x\t\tTwo-byte hexadecimal display"
#define hostid_trivial_usage \
""
"\t-F FILE\tUse the contents of FILE to specify the hostname"
#define hostname_example_usage \
"$ hostname\n" \
- "sage \n"
+ "sage\n"
+
+#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ #define USAGE_HTTPD_BASIC_AUTH(a) a
+ #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
+ #define USAGE_HTTPD_AUTH_MD5(a) a
+ #else
+ #define USAGE_HTTPD_AUTH_MD5(a)
+ #endif
+#else
+ #define USAGE_HTTPD_BASIC_AUTH(a)
+ #define USAGE_HTTPD_AUTH_MD5(a)
+#endif
+#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
+ #define USAGE_HTTPD_STANDALONE(a)
+ #define USAGE_HTTPD_SETUID(a)
+#else
+ #define USAGE_HTTPD_STANDALONE(a) a
+ #ifdef CONFIG_FEATURE_HTTPD_SETUID
+ #define USAGE_HTTPD_SETUID(a) a
+ #else
+ #define USAGE_HTTPD_SETUID(a)
+ #endif
+#endif
+#define httpd_trivial_usage \
+ "[-c <conf file>]" \
+ USAGE_HTTPD_STANDALONE(" [-p <port>]") \
+ USAGE_HTTPD_SETUID(" [-u user]") \
+ USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
+ USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
+ " [-d/-e <string>]"
+#define httpd_full_usage \
+ "Listens for incoming http server requests.\n\n"\
+ "Options:\n" \
+ "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
+ USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
+ USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privilegies port\n") \
+ USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
+ USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
+ "\t-e STRING\tHtml encode STRING\n" \
+ "\t-d STRING\tURL decode STRING"
#define hwclock_trivial_usage \
"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
"\t-u\tthe hardware clock is kept in coordinated universal time\n" \
"\t-l\tthe hardware clock is kept in local time"
+#ifdef CONFIG_SELINUX
+ #define USAGE_SELINUX(a) a
+#else
+ #define USAGE_SELINUX(a)
+#endif
+
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
#define id_full_usage \
"Print information for USERNAME or the current user\n\n" \
"Options:\n" \
+ USAGE_SELINUX("\t-c\tprints only the security context\n") \
"\t-g\tprints only the group ID\n" \
"\t-u\tprints only the user ID\n" \
- "\t-n\tprint a name instead of a number (with for -ug)\n" \
- "\t-r\tprints the real user ID instead of the effective ID (with -ug)"
+ "\t-n\tprint a name instead of a number\n" \
+ "\t-r\tprints the real user ID instead of the effective ID"
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
#define ifup_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifup_full_usage \
- "Usage: ifup <options> <ifaces...>\n\n" \
+ "ifup <options> <ifaces...>\n\n" \
"Options:\n" \
- "\t-h, --help\t\tthis help\n" \
- "\t-a, --all\t\tde/configure all interfaces automatically\n" \
- "\t-i, --interfaces FILE\tuse FILE for interface definitions\n" \
- "\t-n, --no-act\t\tprint out what would happen, but don't do it\n" \
- "\t\t\t\t(note that this option doesn't disable mappings)\n" \
- "\t-v, --verbose\t\tprint out what would happen before doing it\n" \
- "\t--no-mappings\t\tdon't run any mappings\n" \
- "\t--force\t\t\tforce de/configuration\n"
+ "\t-h\tthis help\n" \
+ "\t-a\tde/configure all interfaces automatically\n" \
+ "\t-i FILE\tuse FILE for interface definitions\n" \
+ "\t-n\tprint out what would happen, but don't do it\n" \
+ "\t\t\t(note that this option doesn't disable mappings)\n" \
+ "\t-v\tprint out what would happen before doing it\n" \
+ "\t-m\tdon't run any mappings\n" \
+ "\t-f\tforce de/configuration"
#define ifdown_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifdown_full_usage \
- "Usage: ifdown <options> <ifaces...>\n\n" \
- "Options:\n" \
- "\t-h, --help\t\tthis help\n" \
- "\t-a, --all\t\tde/configure all interfaces automatically\n" \
- "\t-i, --interfaces FILE\tuse FILE for interface definitions\n" \
- "\t-n, --no-act\t\tprint out what would happen, but don't do it\n" \
- "\t\t\t\t(note that this option doesn't disable mappings)\n" \
- "\t-v, --verbose\t\tprint out what would happen before doing it\n" \
- "\t--no-mappings\t\tdon't run any mappings\n" \
- "\t--force\t\t\tforce de/configuration\n"
-
+ "ifdown <options> <ifaces...>\n\n" \
+ "Options:\n" \
+ "\t-h\tthis help\n" \
+ "\t-a\tde/configure all interfaces automatically\n" \
+ "\t-i FILE\tuse FILE for interface definitions\n" \
+ "\t-n\tprint out what would happen, but don't do it\n" \
+ "\t\t(note that this option doesn't disable mappings)\n" \
+ "\t-v\tprint out what would happen before doing it\n" \
+ "\t-m\tdon't run any mappings\n" \
+ "\t-f\tforce de/configuration"
+
+#define inetd_trivial_usage \
+ "[-q len] [conf]"
+#define inetd_full_usage \
+ "Listens for network connections and launches programs\n\n" \
+ "Option:\n" \
+ "\t-q\tSets the size of the socket listen queue to\n" \
+ "\t\tthe specified value. Default is 128."
+
#define init_trivial_usage \
""
#define init_full_usage \
"\n" \
" <id>:<runlevels>:<action>:<process>\n" \
"\n" \
-" <id>: \n" \
+" <id>:\n" \
"\n" \
" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
" The id field is used by BusyBox init to specify the controlling tty for\n" \
" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
" stinkin' utmp.\n" \
"\n" \
-" <runlevels>: \n" \
+" <runlevels>:\n" \
"\n" \
" The runlevels field is completely ignored.\n" \
"\n" \
-" <action>: \n" \
+" <action>:\n" \
"\n" \
-" Valid actions include: sysinit, respawn, askfirst, wait, \n" \
+" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
" once, restart, ctrlaltdel, and shutdown.\n" \
"\n" \
" The available actions can be classified into two groups: actions\n" \
" respawn, except that before running the specified process it\n" \
" displays the line "Please press Enter to activate this console."\n" \
" and then waits for the user to press enter before starting the\n" \
-" specified process. \n" \
+" specified process.\n" \
"\n" \
" Unrecognized actions (like initdefault) will cause init to emit an\n" \
" error message, and then go along with its business. All actions are\n" \
" run in the order they appear in /etc/inittab.\n" \
"\n" \
-" <process>: \n" \
+" <process>:\n" \
"\n" \
" Specifies the process to be executed and it's command line.\n" \
"\n" \
" ::shutdown:/bin/umount -a -r\n" \
" ::shutdown:/sbin/swapoff -a\n"
+#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
+ #define USAGE_INSMOD_MAP(a) a
+#else
+ #define USAGE_INSMOD_MAP(a)
+#endif
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
"\t-k\tMake module autoclean-able.\n" \
"\t-v\tverbose output\n" \
"\t-L\tLock to prevent simultaneous loads of a module\n" \
+ USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
+ "\t-o NAME\tSet internal module name to NAME\n" \
"\t-x\tdo not export externs"
+#define install_trivial_usage \
+ "[-cgmops] [sources] <dest|directory>"
+#define install_full_usage \
+ "Copies files and set attributes\n\n" \
+ "Options:\n" \
+ "\t-c\tcopy the file, default\n" \
+ "\t-g\tset group ownership\n" \
+ "\t-m\tset permission modes\n" \
+ "\t-o\tset ownership\n" \
+ "\t-p\tpreserve date\n" \
+ "\t-s\tstrip symbol tables"
+
#define ip_trivial_usage \
"[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
#define ip_full_usage \
"ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
"where OBJECT := { link | addr | route | tunnel }\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
- "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
+ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
+ "\t\t[ dev STRING ] [ to PREFIX ] }"
#define ipaddr_full_usage \
"ipaddr {add|del} IFADDR dev STRING\n" \
"ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
- " [ to PREFIX ] [ label PATTERN ]\n" \
- "IFADDR := PREFIX | ADDR peer PREFIX\n" \
- " [ broadcast ADDR ] [ anycast ADDR ]\n" \
- " [ label STRING ] [ scope SCOPE-ID ]\n" \
- "SCOPE-ID := [ host | link | global | NUMBER ]\n"
+ "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
+ "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
+ "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
+ "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
+ "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
#ifndef CONFIG_FEATURE_IPCALC_FANCY
-# define ipcalc_trivial_usage \
+#define ipcalc_trivial_usage \
"[--broadcast] [--netmask] [--network] ipaddr <netmask>"
-# define ipcalc_full_usage \
+#define ipcalc_full_usage \
"Calculate IP network settings from a IP address\n\n" \
"Options:\n" \
"\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
"\t-n\t--netmask\tDisplay default netmask for IP.\n" \
- "\t-w\t--network\tDisplay calculated network address."
+ "\t-w\t--network\tDisplay calculated network address."
#else
-# define ipcalc_trivial_usage \
+#define ipcalc_trivial_usage \
"[OPTION]... ipaddr <netmask>"
-# define ipcalc_full_usage \
+#define ipcalc_full_usage \
"Calculate IP network settings from a IP address\n\n" \
"Options:\n" \
"\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
"\t-n\t--netmask\tDisplay default netmask for IP.\n" \
"\t-w\t--network\tDisplay calculated network address.\n" \
"\t-h\t--hostname\tDisplay first resolved host name.\n" \
- "\t-s\t--silent\tDon't ever display error messages."
+ "\t-s\t--silent\tDon't ever display error messages."
#endif
-#define ipcalc_notes_usage \
- "ipcalc provides a simple way to calculate IP information for\n" \
- "a host. The various options specify what information ipcalc\n" \
- "should display on standard out. Multiple options may be\n" \
- "specified.\n"
-
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
"iplink set DEVICE { up | down | arp { on | off } |\n" \
- " dynamic { on | off } |\n" \
- " mtu MTU }\n" \
- "iplink show [ DEVICE ]\n"
+ "\t\t\tdynamic { on | off } |\n" \
+ "\t\t\tmtu MTU }\n" \
+ "\tiplink show [ DEVICE ]"
#define iproute_trivial_usage \
- "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
+ "{ list | flush | { add | del | change | append |\n" \
+ "\t\treplace | monitor } ROUTE }"
#define iproute_full_usage \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
- " [ oif STRING ] [ tos TOS ]\n" \
- "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
- "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
- "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"
+ "\t\t\t[ oif STRING ] [ tos TOS ]\n" \
+ "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
+ "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
+ "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
#define iptunnel_trivial_usage \
- "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+ "{ add | change | del | show } [ NAME ]\n" \
+ "\t\t[ mode { ipip | gre | sit } ]\n" \
+ "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
#define iptunnel_full_usage \
"iptunnel { add | change | del | show } [ NAME ]\n" \
- " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
- " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
- " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"
+ "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
+ "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
+ "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
#define kill_trivial_usage \
"[-signal] process-id [process-id ...]"
"Options:\n" \
"\t-l\tList all signal names and numbers."
#define killall_example_usage \
- "$ killall apache\n"
+ "$ killall apache\n"
#define klogd_trivial_usage \
"[-c n] [-n]"
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
- "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
-
-#define loadacm_trivial_usage \
- "< mapfile"
-#define loadacm_full_usage \
- "Loads an acm from standard input."
-#define loadacm_example_usage \
- "$ loadacm < /etc/i18n/acmname\n"
+ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage \
"Loads a console font from standard input."
#define loadfont_example_usage \
- "$ loadfont < /etc/i18n/fontname\n"
+ "$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage \
"Loads a binary keyboard translation table from standard input."
#define loadkmap_example_usage \
- "$ loadkmap < /etc/i18n/lang-keymap\n"
+ "$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
"Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
"Options:\n" \
"\t-s\tLog to stderr as well as the system log.\n" \
- "\t-t\tLog using the specified tag (defaults to user name).\n" \
- "\t-p\tEnter the message with the specified priority.\n" \
+ "\t-t TAG\tLog using the specified tag (defaults to user name).\n" \
+ "\t-p PRIORITY\tEnter the message with the specified priority.\n" \
"\t\tThis may be numerical or a ``facility.level'' pair."
#define logger_example_usage \
- "$ logger "hello"\n"
+ "$ logger "hello"\n"
#define login_trivial_usage \
"[OPTION]... [username] [ENV=VAR ...]"
"Print the name of the current user."
#define logname_example_usage \
"$ logname\n" \
- "root\n"
+ "root\n"
#define logread_trivial_usage \
- ""
-
+ "[OPTION]..."
#define logread_full_usage \
- "Shows the messages from syslogd (using circular buffer)."
+ "Shows the messages from syslogd (using circular buffer).\n\n" \
+ "Options:\n" \
+ "\t-f\t\toutput data as the log grows"
#define losetup_trivial_usage \
"[OPTION]... LOOPDEVICE FILE\n" \
"Associate LOOPDEVICE with FILE.\n\n" \
"Options:\n" \
"\t-d\t\tDisassociate LOOPDEVICE.\n" \
- "\t-o OFFSET\tStart OFFSET bytes into FILE.\n"
+ "\t-o OFFSET\tStart OFFSET bytes into FILE."
#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
#define USAGE_LS_TIMESTAMPS(a) a
#else
#define USAGE_AUTOWIDTH(a)
#endif
+
#define ls_trivial_usage \
- "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k] [filenames...]"
+ "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
"List directory contents\n\n" \
"Options:\n" \
"\t-x\tlist entries by lines instead of by columns\n" \
USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
USAGE_HUMAN_READABLE( \
- "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
- "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
- "\t-k\tprint sizes in kilobytes(compatibility)")
+ "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
+ USAGE_SELINUX("\t-k\tprint security context\n") \
+ USAGE_SELINUX("\t-K\tprint security context in long format\n")
#define lsmod_trivial_usage \
""
"\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
"\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
- "$ makedevs /dev/ttyS c 4 66 2 63\n" \
+ "# makedevs /dev/ttyS c 4 66 2 63\n" \
"[creates ttyS2-ttyS63]\n" \
- "$ makedevs /dev/hda b 3 0 0 8 s\n" \
- "[creates hda,hda1-hda8]\n"
+ "# makedevs /dev/hda b 3 0 0 8 s\n" \
+ "[creates hda,hda1-hda8]\n"
+
+#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
+#define USAGE_MD5_SHA1_SUM_CHECK(a) a
+#else
+#define USAGE_MD5_SHA1_SUM_CHECK(a)
+#endif
#define md5sum_trivial_usage \
- "[OPTION] [FILE]...\n" \
- "or: md5sum [OPTION] -c [FILE]"
+ "[OPTION] [FILEs...]" \
+ USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage \
- "Print or check MD5 checksums.\n\n" \
+ "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
"Options:\n" \
- "With no FILE, or when FILE is -, read standard input.\n\n" \
- "\t-b\tread files in binary mode\n" \
+ "With no FILE, or when FILE is -, read standard input." \
+ USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
"\t-c\tcheck MD5 sums against given list\n" \
- "\t-t\tread files in text mode (default)\n" \
- "\t-g\tread a string\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
"\t-s\tdon't output anything, status code shows success\n" \
- "\t-w\twarn about improperly formated MD5 checksum lines"
+ "\t-w\twarn about improperly formated MD5 checksum lines")
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
"^D\n"
#define mesg_trivial_usage \
- "mesg [y|n]"
+ "[y|n]"
#define mesg_full_usage \
- "mesg [Y|N], controls write access to your terminal\n" \
+ "mesg controls write access to your terminal\n" \
"\ty\tAllow write access to your terminal.\n" \
"\tn\tDisallow write access to your terminal.\n"
+#define minit_trivial_usage \
+ "[-spPrRC]"
+#define minit_full_usage \
+ "A small replacement for SysV init"
+
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
"/tmp/foo: File exists\n" \
"$ mkdir /tmp/foo/bar/baz\n" \
"/tmp/foo/bar/baz: No such file or directory\n" \
- "$ mkdir -p /tmp/foo/bar/baz\n"
+ "$ mkdir -p /tmp/foo/bar/baz\n"
#define mkfifo_trivial_usage \
"[OPTIONS] name"
"\tc or u:\tMake a character (un-buffered) device.\n" \
"\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
#define mknod_example_usage \
- "$ mknod /dev/fd0 b 2 0 \n" \
- "$ mknod -m 644 /tmp/pipe p\n"
+ "$ mknod /dev/fd0 b 2 0\n" \
+ "$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
"$ mktemp /tmp/temp.XXXXXX\n" \
"/tmp/temp.mWiLjM\n" \
"$ ls -la /tmp/temp.mWiLjM\n" \
- "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
+ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
"[FILE ...]"
#define modprobe_full_usage \
"Used for high level module loading and unloading."
#define modprobe_example_usage \
- "$ modprobe cdrom\n"
+ "$ modprobe cdrom\n"
#define more_trivial_usage \
"[FILE ...]"
#define more_full_usage \
"More is a filter for viewing FILE one screenful at a time."
#define more_example_usage \
- "$ dmesg | more\n"
+ "$ dmesg | more\n"
#ifdef CONFIG_FEATURE_MOUNT_LOOP
#define USAGE_MOUNT_LOOP(a) a
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem\n\n" \
+ "Mount a filesystem. Autodetection of filesystem type requires the\n" \
+ "/proc filesystem be already mounted.\n\n" \
"Flags:\n" \
"\t-a:\t\tMount all filesystems in fstab.\n" \
USAGE_MTAB( \
"proc on /proc type proc (rw)\n" \
"devpts on /dev/pts type devpts (rw)\n" \
"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
- "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
+ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
+
+#define msvc_trivial_usage \
+ "-[udorspchaitkx] service"
+#define msvc_full_usage \
+ "[option] service\n" \
+ "Where option is one of\n" \
+ "\t-u\tUp. If the service is not running, start it. If the service stops, restart it.\n" \
+ "\t-d\tDown. If the service is running, stop it, do not restart it.\n" \
+ "\t-o\tOnce. If the service is not running, start it. Do not restart it if it stops.\n" \
+ "\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \
+ "\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \
+ "\t-p\tPause. Send the service a STOP signal.\n" \
+ "\t-c\tContinue. Send the service a CONT signal.\n" \
+ "\t-h\tHangup. Send the service a HUP signal.\n" \
+ "\t-a\tAlarm. Send the service an ALRM signal.\n" \
+ "\t-i\tInterrupt. Send the service an INT signal.\n" \
+ "\t-t\tTerminate. Send the service a TERM signal.\n" \
+ "\t-k\tKill. Send the service a KILL signal.\n" \
+ "\t-x\tExit. supervise will quit as soon as the service is down."
#define mt_trivial_usage \
"[-f device] opcode value"
"\nAvailable Opcodes:\n\n" \
"bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
"fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
- "ras3 reset retension rew rewoffline seek setblk setdensity\n" \
+ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
"setpart tell unload unlock weof wset"
#define mv_trivial_usage \
#define mv_full_usage \
"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
#define mv_example_usage \
- "$ mv /tmp/foo /bin/bar\n"
+ "$ mv /tmp/foo /bin/bar\n"
+
+#define nameif_trivial_usage \
+ "[-s] [-c FILE] [{IFNAME MACADDR}]"
+#define nameif_full_usage \
+ "Nameif renaming network interface while it in the down state.\n\n" \
+ "Options:\n" \
+ "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
+ "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
+ "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
+#define nameif_example_usage \
+ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+ " or\n" \
+ "$ nameif -c /etc/my_mactab_file\n" \
#define nc_trivial_usage \
- "[OPTIONS] [IP] [port]"
+ "[OPTIONS] [IP] [port]"
#define nc_full_usage \
"Netcat opens a pipe to IP:port\n\n" \
"Options:\n" \
"214- HELO EHLO MAIL RCPT DATA AUTH\n" \
"214 NOOP QUIT RSET HELP\n" \
"quit\n" \
- "221 foobar closing connection\n"
+ "221 foobar closing connection\n"
#define netstat_trivial_usage \
"[-laenrtuwx]"
#define netstat_full_usage \
- "-l display listening server sockets\n" \
- "-a display all sockets (default: connected)\n" \
- "-e display other/more information\n" \
- "-n don't resolve names\n" \
- "-r display routing table\n" \
- "-t tcp sockets\n" \
- "-u udp sockets\n" \
- "-w raw sockets\n" \
- "-x unix sockets\n"
+ "Netstat displays Linux networking information.\n\n" \
+ "Options:\n" \
+ "\t-l display listening server sockets\n" \
+ "\t-a display all sockets (default: connected)\n" \
+ "\t-e display other/more information\n" \
+ "\t-n don't resolve names\n" \
+ "\t-r display routing table\n" \
+ "\t-t tcp sockets\n" \
+ "\t-u udp sockets\n" \
+ "\t-w raw sockets\n" \
+ "\t-x unix sockets"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
"Address: default\n" \
"\n" \
"Name: debian\n" \
- "Address: 127.0.0.1\n"
+ "Address: 127.0.0.1\n"
#define od_trivial_usage \
"[-aBbcDdeFfHhIiLlOovXx] [FILE]"
#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
#define PASSWORD_ALG_TYPES(a) a
-#else
+#else
#define PASSWORD_ALG_TYPES(a)
#endif
#define passwd_trivial_usage \
"\t-l\tLocks (disables) the specified user account.\n" \
"\t-u\tUnlocks (re-enables) the specified user account."
+#define patch_trivial_usage \
+ "[-p<num>]"
+#define patch_full_usage \
+ "[-p<num>]"
+#define patch_example_usage \
+ "$ patch -p1 <example.diff"
+
+#define pidfilehack_trivial_usage \
+ "[daemon.pid] [daemon]"
+#define pidfilehack_full_usage \
+ "service /var/run/daemon.pid /usr/sbin/daemon args...\n"
+
#define pidof_trivial_usage \
"process-name [process-name ...]"
#define pidof_full_usage \
- "Lists the PIDs of all processes with names that match the names on the command line"
+ "Lists the PIDs of all processes with names that match the\n" \
+ "names on the command line"
#define pidof_example_usage \
"$ pidof init\n" \
"1\n"
"\n" \
"--- debian ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
- "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#ifndef CONFIG_FEATURE_FANCY_PING6
#define ping6_trivial_usage "host"
"\n" \
"--- ip6-localhost ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
- "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define pivot_root_trivial_usage \
"NEW_ROOT PUT_OLD"
"Where FORMAT controls the output exactly as in C printf."
#define printf_example_usage \
"$ printf "Val=%d\\n" 5\n" \
- "Val=5\n"
+ "Val=5\n"
+
+#ifdef CONFIG_SELINUX
+#define USAGE_NONSELINUX(a)
+#else
+#define USAGE_NONSELINUX(a) a
+#endif
#define ps_trivial_usage \
""
#define ps_full_usage \
"Report process status\n" \
- "\nThis version of ps accepts no options."
+ USAGE_NONSELINUX("\n\tThis version of ps accepts no options.") \
+ USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context")
+
#define ps_example_usage \
"$ ps\n" \
" PID Uid Gid State Command\n" \
"$ pwd\n" \
"/root\n"
+#define raid_start_trivial_usage \
+ "MD_DEVICE DISK_DEVICE"
+#define raid_start_full_usage \
+ "Start MD_DEVICE, taking superblock from DISK_DEVICE.\n" \
+ "Example: raid_start /dev/md0 /dev/sdb"
+
#define rdate_trivial_usage \
- "[OPTION] HOST"
+ "[-sp] HOST"
#define rdate_full_usage \
"Get and possibly set the system date and time from a remote HOST.\n\n" \
"Options:\n" \
#define readlink_trivial_usage \
""
#define readlink_full_usage \
- "Read a symbolic link."
+ "Displays the value of a symbolic link."
+
+#define realpath_trivial_usage \
+ "pathname ..."
+#define realpath_full_usage \
+ "Returns the absolute pathnames of given argument."
#define reboot_trivial_usage \
""
"Remove (unlink) the FILE(s). You may use '--' to\n" \
"indicate that all following arguments are non-options.\n\n" \
"Options:\n" \
- "\t-i\t\talways prompt before removing each destination" \
+ "\t-i\t\talways prompt before removing each destination\n" \
"\t-f\t\tremove existing destinations, never prompt\n" \
"\t-r or -R\tremove the contents of directories recursively"
#define rm_example_usage \
#define rmmod_full_usage \
"Unloads the specified kernel modules from the kernel.\n\n" \
"Options:\n" \
- "\t-a\tTry to remove all unused kernel modules."
+ "\t-a\tRemove all unused modules (recursively)"
#define rmmod_example_usage \
"$ rmmod tulip\n"
+#ifdef CONFIG_FEATURE_IPV6
+ #define USAGE_ROUTE_IPV6(a) a
+#else
+ #define USAGE_ROUTE_IPV6(a) "\t"
+#endif
+
+
#define route_trivial_usage \
- "[{add|del|flush}]"
+ "[{add|del|delete}]"
#define route_full_usage \
"Edit the kernel's routing tables.\n\n" \
"Options:\n" \
- "\t-n\tDont resolve names.\n" \
- "\t-e\tDisplay other/more information"
+ "\t-n\t\tDont resolve names.\n" \
+ "\t-e\t\tDisplay other/more information.\n" \
+ "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family."
+
+#define rpm_trivial_usage \
+ "-i -q[ildc]p package.rpm"
+#define rpm_full_usage \
+ "Manipulates RPM packages" \
+ "\n\nOptions:" \
+ "\n\t-i Install package" \
+ "\n\t-q Query package" \
+ "\n\t-p Query uninstalled package" \
+ "\n\t-i Show information" \
+ "\n\t-l List contents" \
+ "\n\t-d List documents" \
+ "\n\t-c List config files"
#define rpm2cpio_trivial_usage \
"package.rpm"
#define run_parts_full_usage \
"Run a bunch of scripts in a directory.\n\n" \
"Options:\n" \
- "\t-t\t\tTest only what file will be executed, without execute them.\n" \
+ "\t-t\tPrints what would be run, but does not actually run anything.\n" \
"\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
"\t-u MASK\tSet the umask to MASK before executing every program."
+#define rx_trivial_usage \
+ "FILE"
+#define rx_full_usage \
+ "Receive a file using the xmodem protocol."
+#define rx_example_usage \
+ "$ rx /tmp/foo\n"
+
#define sed_trivial_usage \
"[-nef] pattern [files...]"
#define sed_full_usage \
"$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
+#define seq_trivial_usage \
+ "[first [increment]] last"
+#define seq_full_usage \
+ "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
+ "FIRST, INCREMENT default to 1\n" \
+ "Arguments:\n" \
+ "\tLAST\n" \
+ "\tFIRST\tLAST\n" \
+ "\tFIRST\tINCREMENT\tLAST"
+
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
"[FILE]...\n" \
"or: sh -c command [args]..."
#define lash_full_usage \
- "lash: The BusyBox LAme SHell (command interpreter)"
+ "The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
-"This command does not yet have proper documentation.\n" \
-"\n" \
-"Use lash just as you would use any other shell. It properly handles pipes,\n" \
-"redirects, job control, can be used as the shell for scripts, and has a\n" \
-"sufficient set of builtins to do what is needed. It does not (yet) support\n" \
-"Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
-"use ash or bash. If you just need a very simple and extremely small shell,\n" \
-"this will do the job."
+ "This command does not yet have proper documentation.\n\n" \
+ "Use lash just as you would use any other shell. It properly handles pipes,\n" \
+ "redirects, job control, can be used as the shell for scripts, and has a\n" \
+ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
+ "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
+ "use ash or bash. If you just need a very simple and extremely small shell,\n" \
+ "this will do the job."
+
+#define last_trivial_usage \
+ ""
+#define last_full_usage \
+ "Shows listing of the last users that logged into the system"
+
+#define sha1sum_trivial_usage \
+ "[OPTION] [FILEs...]" \
+ USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
+#define sha1sum_full_usage \
+ "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
+ "Options:\n" \
+ "With no FILE, or when FILE is -, read standard input." \
+ USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
+ "\t-c\tcheck SHA1 sums against given list\n" \
+ "\nThe following two options are useful only when verifying checksums:\n" \
+ "\t-s\tdon't output anything, status code shows success\n" \
+ "\t-w\twarn about improperly formated SHA1 checksum lines")
+
+#ifdef CONFIG_FEATURE_FANCY_SLEEP
+ #define USAGE_FANCY_SLEEP(a) a
+ #define USAGE_NOT_FANCY_SLEEP(a)
+#else
+ #define USAGE_FANCY_SLEEP(a)
+ #define USAGE_NOT_FANCY_SLEEP(a) a
+#endif
#define sleep_trivial_usage \
- "N"
+ USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
#define sleep_full_usage \
- "Pause for N seconds."
+ USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
+ USAGE_FANCY_SLEEP( \
+ "Pause for a time equal to the total of the args given, where each arg can\n" \
+ "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
#define sleep_example_usage \
"$ sleep 2\n" \
- "[2 second delay results]\n"
-
+ "[2 second delay results]\n" \
+ USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
+ "[98528 second delay results]\n")
#ifdef CONFIG_FEATURE_SORT_UNIQUE
#define USAGE_SORT_UNIQUE(a) a
"f\n"
#define start_stop_daemon_trivial_usage \
- "[OPTIONS]"
+ "[OPTIONS] [--start|--stop] ... [-- arguments...]\n"
#define start_stop_daemon_full_usage \
- "Program to start and stop services.\n"\
- "Options:\n" \
- "-S\t\t\tstart\n"\
- "-K\t\t\tstop\n"\
- "-b\t\t\tforce process into background (daemonize)\n"\
- "-x <executable>\t\tprogram to start/check if it is running\n"\
- "-u <username>|<uid>\tstop this user's processes\n"\
- "-n <process-name>\tstop processes with this name\n"\
- "-s <signal>\t\tsignal to send (default 15)\n"\
- "-a <pathname>\t\tprogram to start (default <executable>)\n"
+ "Program to start and stop services."\
+ "\n\nOptions:"\
+ "\n\t-S|--start\t\t\tstart"\
+ "\n\t-K|--stop\t\t\tstop"\
+ "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname"\
+ "\n\t-b|--background\t\t\tforce process into background"\
+ "\n\t-u|--user <username>|<uid>\tstop this user's processes"\
+ "\n\t-x|--exec <executable>\t\tprogram to either start or check"\
+ "\n\t-n|--name <process-name>\tstop processes with this name"\
+ "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file"\
+ "\n\t-q|--quiet\t\t\tbe quiet" \
+ "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
#define strings_trivial_usage \
- "[-afo] [-n length] [file ... ]"
+ "[-afo] [-n length] [file ... ]"
#define strings_full_usage \
- "Display printable strings in a binary file." \
- "\n\nOptions:" \
- "\n\t-f\tPrecede each string with the name of the file where it was found." \
- "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
- "\n\t-o\tEach string is preceded by its decimal offset in the file."
+ "Display printable strings in a binary file." \
+ "\n\nOptions:" \
+ "\n\t-f\tPrecede each string with the name of the file where it was found." \
+ "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
+ "\n\t-o\tEach string is preceded by its decimal offset in the file."
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
"Write all buffered filesystem blocks to disk."
+#ifdef CONFIG_FEATURE_ROTATE_LOGFILE
+ #define USAGE_ROTATE_LOGFILE(a) a
+#else
+ #define USAGE_ROTATE_LOGFILE(a)
+#endif
#ifdef CONFIG_FEATURE_REMOTE_LOG
#define USAGE_REMOTE_LOG(a) a
#else
#define USAGE_IPC_LOG(a)
#endif
+#ifdef CONFIG_SYSCTL
+#define sysctl_trivial_usage \
+ "[OPTIONS]... [VALUE]...\n"
+#define sysctl_full_usage
+ "sysctl - configure kernel parameters at runtime\n\n" \
+ "Options:\n" \
+ "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
+ "\t-e\tUse this option to ignore errors about unknown keys.\n" \
+ "\t-w\tUse this option when you want to change a sysctl setting.\n" \
+ "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
+ "\t-a\tDisplay all values currently available.\n" \
+ "\t-A\tDisplay all values currently available in table form."
+#define sysctl_example_usage
+ "sysctl [-n] [-e] variable ...\n" \
+ "sysctl [-n] [-e] -w variable=value ...\n" \
+ "sysctl [-n] [-e] -a\n" \
+ "sysctl [-n] [-e] -p <file>\t(default /etc/sysctl.conf)\n" \
+ "sysctl [-n] [-e] -A\n"
+#endif
+
#define syslogd_trivial_usage \
"[OPTION]..."
#define syslogd_full_usage \
"Linux system and kernel logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
"Options:\n" \
- "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
+ "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
"\t-n\t\tRun as a foreground process\n" \
"\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
+ USAGE_ROTATE_LOGFILE( \
+ "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
+ "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
USAGE_REMOTE_LOG( \
"\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
"\t-L\t\tLog locally and via network logging (default is network only)") \
USAGE_IPC_LOG( \
- "\n\t-C\t\tLog to a circular buffer (read the buffer using logread)")
+ "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
#else
#define USAGE_TAR_EXCLUDE(a)
#endif
+#ifdef CONFIG_FEATURE_TAR_GZIP
+ #define USAGE_TAR_GZIP(a) a
+#else
+ #define USAGE_TAR_GZIP(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_BZIP2
+ #define USAGE_TAR_BZIP2(a) a
+#else
+ #define USAGE_TAR_BZIP2(a)
+#endif
+#ifdef CONFIG_FEATURE_TAR_COMPRESS
+ #define USAGE_TAR_COMPRESS(a) a
+#else
+ #define USAGE_TAR_COMPRESS(a)
+#endif
+
#define tar_trivial_usage \
- "-[" USAGE_TAR_CREATE("c") "xtvO] " \
- USAGE_TAR_EXCLUDE("[--exclude FILE] [-X FILE]") \
+ "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \
+ USAGE_TAR_EXCLUDE("[-X FILE]") \
"[-f TARFILE] [-C DIR] [FILE(s)] ..."
#define tar_full_usage \
"Create, extract, or list files from a tar file.\n\n" \
USAGE_TAR_CREATE("\tc\t\tcreate\n") \
"\tx\t\textract\n" \
"\tt\t\tlist\n" \
+ "\nArchive format selection:\n" \
+ USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
+ USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
+ USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
"\nFile selection:\n" \
"\tf\t\tname of TARFILE or \"-\" for stdin\n" \
"\tO\t\textract to stdout\n" \
#define tee_full_usage \
"Copy standard input to each FILE, and also to standard output.\n\n" \
"Options:\n" \
- "\t-a\tappend to the given FILEs, do not overwrite"
+ "\t-a\tappend to the given FILEs, do not overwrite\n" \
+ "\t-i\tignore interrupt signals (SIGINT)"
#define tee_example_usage \
"$ echo "Hello" | tee /tmp/foo\n" \
"$ cat /tmp/foo\n" \
"Hello\n"
+#ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
+#define telnet_trivial_usage \
+ "[-a] [-l USER] HOST [PORT]"
+#define telnet_full_usage \
+ "Telnet is used to establish interactive communication with another\n" \
+ "computer over a network using the TELNET protocol.\n\n" \
+ "Options:\n" \
+ "\t-a\t\tAttempt an automatic login with the USER variable.\n" \
+ "\t-l USER\t\tAttempt an automatic login with the USER argument.\n" \
+ "\tHOST\t\tThe official name, alias or the IP address of the\n" \
+ "\t\t\tremote host.\n" \
+ "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
+ "\t\t\tspecified, the default telnet (23) port is used."
+#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage \
"Telnet is used to establish interactive communication with another\n"\
"computer over a network using the TELNET protocol."
+#endif
+#ifdef CONFIG_FEATURE_TELNETD_INETD
+#define telnetd_trivial_usage \
+ "(inetd mode) [OPTION]"
+#define telnetd_full_usage \
+ "Telnetd uses incoming TELNET connections via inetd.\n"\
+ "Options:\n" \
+ "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
+#else
#define telnetd_trivial_usage \
"[OPTION]"
#define telnetd_full_usage \
"Options:\n" \
"\t-p PORT\tlisten for connections on PORT (default 23)\n"\
"\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
+#endif
#define test_trivial_usage \
"EXPRESSION\n or [ EXPRESSION ]"
"$ echo $?\n" \
"1\n" \
"$ test 1 -eq 1\n" \
- "$ echo $? \n" \
+ "$ echo $?\n" \
"0\n" \
"$ [ -d /etc ]\n" \
"$ echo $?\n" \
"Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
"Options:\n" \
"\t-l FILE\tLocal FILE.\n" \
- "\t-r FILE\tRemote FILE.\n" \
+ "\t-r FILE\tRemote FILE." \
USAGE_TFTP_GET( \
- "\t-g\tGet file.\n" \
+ "\n\t-g\tGet file." \
) \
USAGE_TFTP_PUT( \
- "\t-p\tPut file.\n" \
+ "\n\t-p\tPut file." \
) \
USAGE_TFTP_BS( \
- "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
- )
+ "\n\t-b SIZE\tTransfer blocks of SIZE octets." \
+ )
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
"/bin/ls: /tmp/foo: No such file or directory\n" \
"$ touch /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
- "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
+ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
#define tr_trivial_usage \
"[-cds] STRING1 [STRING2]"
"\t-s\tsqueeze multiple output characters of STRING2 into one character"
#define tr_example_usage \
"$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
- "hello world\n"
+ "hello world\n"
#define traceroute_trivial_usage \
- "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\
- [-s src_addr] [-t tos] [-w wait] host [data size]"
+ "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n"\
+ "\t[-s src_addr] [-t tos] [-w wait] host [data size]"
#define traceroute_full_usage \
"trace the route ip packets follow going to \"host\"\n" \
"Options:\n" \
#define udhcpc_trivial_usage \
"[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
#define udhcpc_full_usage \
- "\tUsage: udhcpc [OPTIONS]\n" \
"\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
"\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
"\t-h,\t \tAlias for -H\n" \
"[configfile]\n" \
#define udhcpd_full_usage \
- "\tUsage: udhcpd [configfile]\n"
+ ""
#ifdef CONFIG_FEATURE_MOUNT_FORCE
#define USAGE_MOUNT_FORCE(a) a
"\t-v\tprint the operating system version"
#define uname_example_usage \
"$ uname -a\n" \
- "Linux debian 2.2.15pre13 #5 Tue Mar 14 16:03:50 MST 2000 i686 unknown\n"
+ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
"[-c] [-f] [ name ... ]"
"Uncompress .Z file[s]\n" \
"Options:\n" \
"\t-c\textract to stdout\n" \
- "\t-f\tforce overwrite an existing file\n"
-
+ "\t-f\tforce overwrite an existing file"
+
#define uniq_trivial_usage \
"[OPTION]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Options:\n" \
"\t-c\tprefix lines by the number of occurrences\n" \
"\t-d\tonly print duplicate lines\n" \
- "\t-u\tonly print unique lines"
+ "\t-u\tonly print unique lines\n" \
+ "\t-f N\tskip the first N fields\n" \
+ "\t-s N\tskip the first N chars (after any skipped fields)"
#define uniq_example_usage \
"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
"a\n" \
"\t-x\texclude these files\n" \
"\t-d\textract files into this directory"
-#define update_trivial_usage \
- "[options]"
-#define update_full_usage \
- "Periodically flushes filesystem buffers.\n\n" \
- "Options:\n" \
- "\t-S\tforce use of sync(2) instead of flushing\n" \
- "\t-s SECS\tcall sync this often (default 30)\n" \
- "\t-f SECS\tflush some buffers this often (default 5)"
-
#define uptime_trivial_usage \
""
#define uptime_full_usage \
"Display the time since the last boot."
#define uptime_example_usage \
"$ uptime\n" \
- " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
+ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
#define usleep_trivial_usage \
- "N"
+ "N"
#define usleep_full_usage \
"Pause for N microseconds."
#define usleep_example_usage \
#define uudecode_full_usage \
"Uudecode a file that is uuencoded.\n\n" \
"Options:\n" \
- "\t-o FILE\tdirect output to FILE"
+ "\t-o FILE\tdirect output to FILE"
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
"$ ls -l busybox\n" \
- "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
+ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
#define uuencode_trivial_usage \
"[OPTION] [INFILE] REMOTEFILE"
"$ uudecode busybox busybox > busybox.uu\n" \
"$\n"
+#define vconfig_trivial_usage \
+ "COMMAND [OPTIONS] ..."
+#define vconfig_full_usage \
+ "vconfig lets you create and remove virtual ethernet devices.\n\n" \
+ "Options:\n" \
+ "\tadd [interface-name] [vlan_id]\n" \
+ "\trem [vlan-name]\n" \
+ "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
+ "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_name_type [name-type]"
+
#define vi_trivial_usage \
"[OPTION] [FILE]..."
#define vi_full_usage \
"edit FILE.\n\n" \
"Options:\n" \
- "\t-R\tRead-only- do not write to the file."
+ "\t-R\tRead-only- do not write to the file."
#define vlock_trivial_usage \
"[OPTIONS]"
#define watch_full_usage \
"Executes a program periodically.\n" \
"Options:\n" \
- "\t-n\tLoop period in seconds - default is 2."
+ "\t-n\tLoop period in seconds - default is 2."
#define watch_example_usage \
"$ watch date\n" \
"Mon Dec 17 10:31:40 GMT 2000\n" \
"Mon Dec 17 10:31:42 GMT 2000\n" \
- "Mon Dec 17 10:31:44 GMT 2000"
+ "Mon Dec 17 10:31:44 GMT 2000"
#define watchdog_trivial_usage \
- "DEV"
+ "[-t <seconds>] DEV"
#define watchdog_full_usage \
- "Periodically write to watchdog device DEV"
+ "Periodically write to watchdog device DEV.\n" \
+ "Options:\n" \
+ "\t-t\tTimer period in seconds - default is 30."
#define wc_trivial_usage \
"[OPTION]... [FILE]..."
"\t-w\tprint the word counts"
#define wc_example_usage \
"$ wc /etc/passwd\n" \
- " 31 46 1365 /etc/passwd\n"
+ " 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
+ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
#define wget_full_usage \
"wget retrieves files via HTTP or FTP\n\n" \
"Options:\n" \
#define whoami_full_usage \
"Prints the user name associated with the current effective user id."
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
+#define USAGE_XARGS_CONFIRMATION(a) a
+#else
+#define USAGE_XARGS_CONFIRMATION(a)
+#endif
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
+#define USAGE_XARGS_TERMOPT(a) a
+#else
+#define USAGE_XARGS_TERMOPT(a)
+#endif
+#ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
+#define USAGE_XARGS_ZERO_TERM(a) a
+#else
+#define USAGE_XARGS_ZERO_TERM(a)
+#endif
+
+
#define xargs_trivial_usage \
- "[COMMAND] [-prt] [ARGS...]"
+ "[COMMAND] [OPTIONS] [ARGS...]"
#define xargs_full_usage \
"Executes COMMAND on every item given by standard input.\n\n" \
"Options:\n" \
- "\t-p\tPrompt the user about whether to run each command\n" \
+ USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
"\t-r\tDo not run command for empty readed lines\n" \
+ USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
+ USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
"\t-t\tPrint the command line on stderr before executing it."
#define xargs_example_usage \
"$ ls | xargs gzip\n" \
- "$ find . -name '*.c' -print | xargs rm\n"
+ "$ find . -name '*.c' -print | xargs rm\n"
#define yes_trivial_usage \
"[OPTION]... [STRING]..."
"FILE"
#define zcat_full_usage \
"Uncompress to stdout."
+
+#endif /* __BB_USAGE_H__ */