#
# Copyright (C) 2007-2008 OpenWrt.org
+# Copyright (C) 2016 LEDE Project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
DEVICE_TYPE?=router
# Default packages - the really basic set
-DEFAULT_PACKAGES:=base-files libc libgcc busybox dropbear mtd uci opkg hotplug2 netifd
+DEFAULT_PACKAGES:=base-files libc libgcc busybox dropbear mtd uci opkg netifd fstools uclient-fetch logd
+# For nas targets
+DEFAULT_PACKAGES.nas:=block-mount fdisk lsblk mdadm
# For router targets
-DEFAULT_PACKAGES.router:=dnsmasq iptables ip6tables ppp ppp-mod-pppoe kmod-ipt-nathelper firewall 6relayd odhcp6c
+DEFAULT_PACKAGES.router:=dnsmasq iptables ip6tables ppp ppp-mod-pppoe firewall odhcpd odhcp6c
DEFAULT_PACKAGES.bootloader:=
ifneq ($(DUMP),)
# Add device specific packages (here below to allow device type set from subtarget)
DEFAULT_PACKAGES += $(DEFAULT_PACKAGES.$(DEVICE_TYPE))
-define Profile/Default
+filter_packages = $(filter-out -% $(patsubst -%,%,$(filter -%,$(1))),$(1))
+extra_packages = $(if $(filter wpad-mini wpad nas,$(1)),iwinfo)
+
+define ProfileDefault
NAME:=
+ PRIORITY:=
PACKAGES:=
endef
ifndef Profile
define Profile
- $(eval $(call Profile/Default))
+ $(eval $(call ProfileDefault))
$(eval $(call Profile/$(1)))
- $(eval $(call shexport,Profile/$(1)/Config))
- $(eval $(call shexport,Profile/$(1)/Description))
+ dumpinfo : $(call shexport,Profile/$(1)/Description)
DUMPINFO += \
echo "Target-Profile: $(1)"; \
+ $(if $(PRIORITY), echo "Target-Profile-Priority: $(PRIORITY)"; ) \
echo "Target-Profile-Name: $(NAME)"; \
- echo "Target-Profile-Packages: $(PACKAGES)"; \
- if [ -f ./config/profile-$(1) ]; then \
- echo "Target-Profile-Kconfig: yes"; \
- fi; \
- echo "Target-Profile-Config: "; \
- $(SH_FUNC) getvar "$(call shvar,Profile/$(1)/Config)"; \
- echo "@@"; \
+ echo "Target-Profile-Packages: $(PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES) $(PACKAGES))"; \
echo "Target-Profile-Description:"; \
- $(SH_FUNC) getvar "$(call shvar,Profile/$(1)/Description)"; \
+ echo "$$$$$$$$$(call shvar,Profile/$(1)/Description)"; \
echo "@@"; \
echo;
- ifeq ($(CONFIG_TARGET_$(call target_conf,$(BOARD)_$(if $(SUBTARGET),$(SUBTARGET)_)$(1))),y)
- PROFILE=$(1)
- endif
endef
endif
endef
endif
+PROFILE?=$(call qstrip,$(CONFIG_TARGET_PROFILE))
+
ifeq ($(TARGET_BUILD),1)
- $(eval $(call IncludeProfiles))
-else
- ifeq ($(DUMP),)
+ ifneq ($(DUMP),)
$(eval $(call IncludeProfiles))
endif
endif
-$(eval $(call shexport,Target/Description))
-
ifneq ($(TARGET_BUILD)$(if $(DUMP),,1),)
include $(INCLUDE_DIR)/kernel-version.mk
endif
LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_TARGET_CONFIG) $(LINUX_SUBTARGET_CONFIG))
LINUX_RECONFIG_TARGET = $(LINUX_SUBTARGET_CONFIG)
endif
+ifeq ($(CONFIG_TARGET),subtarget_platform)
+ LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_SUBTARGET_CONFIG) $(LINUX_TARGET_CONFIG))
+ LINUX_RECONFIG_TARGET = $(LINUX_TARGET_CONFIG)
+endif
ifeq ($(CONFIG_TARGET),env)
LINUX_RECONFIG_LIST = $(LINUX_KCONFIG_LIST)
LINUX_RECONFIG_TARGET = $(TOPDIR)/env/kernel-config
ifeq ($(DUMP),1)
BuildTarget=$(BuildTargets/DumpCurrent)
+ CPU_CFLAGS = -Os -pipe
+ ifneq ($(findstring mips,$(ARCH)),)
+ ifneq ($(findstring mips64,$(ARCH)),)
+ CPU_TYPE ?= mips64
+ else
+ CPU_TYPE ?= mips32
+ endif
+ CPU_CFLAGS += -mno-branch-likely
+ CPU_CFLAGS_mips32 = -mips32 -mtune=mips32
+ CPU_CFLAGS_mips32r2 = -mips32r2 -mtune=mips32r2
+ CPU_CFLAGS_mips64 = -mips64 -mtune=mips64 -mabi=64
+ CPU_CFLAGS_24kc = -mips32r2 -mtune=24kc
+ CPU_CFLAGS_34kc = -mips32r2 -mtune=34kc
+ CPU_CFLAGS_74kc = -mips32r2 -mtune=74kc
+ CPU_CFLAGS_1004kc = -mips32r2 -mtune=1004kc
+ CPU_CFLAGS_octeon = -march=octeon -mabi=64
+ endif
+ ifeq ($(ARCH),i386)
+ CPU_TYPE ?= i486
+ CPU_CFLAGS_i486 = -march=i486
+ CPU_CFLAGS_pentium4 = -march=pentium4
+ CPU_CFLAGS_geode = -march=geode -mmmx -m3dnow
+ endif
+ ifneq ($(findstring arm,$(ARCH)),)
+ CPU_TYPE ?= xscale
+ CPU_CFLAGS_arm920t = -mcpu=arm920t
+ CPU_CFLAGS_arm926ej-s = -mcpu=arm926ej-s
+ CPU_CFLAGS_arm1136j-s = -mcpu=arm1136j-s
+ CPU_CFLAGS_arm1176jzf-s = -mcpu=arm1176jzf-s
+ CPU_CFLAGS_cortex-a5 = -mcpu=cortex-a5
+ CPU_CFLAGS_cortex-a7 = -mcpu=cortex-a7
+ CPU_CFLAGS_cortex-a8 = -mcpu=cortex-a8
+ CPU_CFLAGS_cortex-a9 = -mcpu=cortex-a9
+ CPU_CFLAGS_cortex-a15 = -mcpu=cortex-a15
+ CPU_CFLAGS_cortex-a53 = -mcpu=cortex-a53
+ CPU_CFLAGS_fa526 = -mcpu=fa526
+ CPU_CFLAGS_mpcore = -mcpu=mpcore
+ CPU_CFLAGS_xscale = -mcpu=xscale
+ ifeq ($(CONFIG_SOFT_FLOAT),)
+ CPU_CFLAGS_neon = -mfpu=neon
+ CPU_CFLAGS_vfp = -mfpu=vfp
+ CPU_CFLAGS_vfpv3 = -mfpu=vfpv3-d16
+ CPU_CFLAGS_neon-vfpv4 = -mfpu=neon-vfpv4
+ endif
+ endif
+ ifeq ($(ARCH),powerpc)
+ CPU_CFLAGS_603e:=-mcpu=603e
+ CPU_CFLAGS_8540:=-mcpu=8540
+ CPU_CFLAGS_405:=-mcpu=405
+ CPU_CFLAGS_440:=-mcpu=440
+ CPU_CFLAGS_464fp:=-mcpu=464fp
+ endif
+ ifeq ($(ARCH),sparc)
+ CPU_TYPE = sparc
+ CPU_CFLAGS_ultrasparc = -mcpu=ultrasparc
+ endif
+ ifeq ($(ARCH),aarch64)
+ CPU_TYPE ?= armv8-a
+ CPU_CFLAGS_armv8-a = -mcpu=armv8-a
+ endif
+ ifeq ($(ARCH),arc)
+ CPU_TYPE ?= arc700
+ CPU_CFLAGS += -matomic
+ CPU_CFLAGS_arc700 = -marc700
+ CPU_CFLAGS_archs = -marchs
+ endif
+ DEFAULT_CFLAGS=$(strip $(CPU_CFLAGS) $(CPU_CFLAGS_$(CPU_TYPE)) $(CPU_CFLAGS_$(CPU_SUBTYPE)))
+
ifneq ($(BOARD),)
TMP_CONFIG:=$(TMP_DIR)/.kconfig-$(call target_conf,$(TARGETID))
$(TMP_CONFIG): $(LINUX_KCONFIG_LIST)
.SILENT: $(TMP_CONFIG)
.PRECIOUS: $(TMP_CONFIG)
- ifneq ($(CONFIG_GENERIC_GPIO),)
+ ifneq ($(CONFIG_OF),)
+ FEATURES += dt
+ endif
+ ifneq ($(CONFIG_GENERIC_GPIO)$(CONFIG_GPIOLIB),)
FEATURES += gpio
endif
ifneq ($(CONFIG_PCI),)
ifneq ($(CONFIG_RTC_CLASS),)
FEATURES += rtc
endif
- FEATURES += $(foreach v,v4 v5 v6 v7,$(if $(findstring -march=arm$(v),$(CFLAGS)),arm_$(v)))
+ ifneq ($(CONFIG_VIRTIO),)
+ FEATURES += virtio
+ endif
+ FEATURES += $(foreach v,6 7,$(if $(CONFIG_CPU_V$(v)),arm_v$(v)))
# remove duplicates
FEATURES:=$(sort $(FEATURES))
endif
- DEFAULT_CFLAGS_i386=-O2 -pipe -march=i486 -fno-caller-saves
- DEFAULT_CFLAGS_x86_64=-O2 -pipe -march=athlon64 -fno-caller-saves
- DEFAULT_CFLAGS_m68k=-Os -pipe -mcfv4e -fno-caller-saves
- DEFAULT_CFLAGS_mips=-Os -pipe -mips32 -mtune=mips32 -fno-caller-saves -mno-branch-likely
- DEFAULT_CFLAGS_mipsel=$(DEFAULT_CFLAGS_mips)
- DEFAULT_CFLAGS_mips64=-Os -pipe -mips64 -mtune=mips64 -mabi=64 -fno-caller-saves
- DEFAULT_CFLAGS_mips64el=$(DEFAULT_CFLAGS_mips64)
- DEFAULT_CFLAGS_sparc=-Os -pipe -mcpu=ultrasparc -fno-caller-saves
- DEFAULT_CFLAGS_arm=-Os -pipe -march=armv5te -mtune=xscale -fno-caller-saves
- DEFAULT_CFLAGS_armeb=$(DEFAULT_CFLAGS_arm)
- DEFAULT_CFLAGS=$(if $(DEFAULT_CFLAGS_$(ARCH)),$(DEFAULT_CFLAGS_$(ARCH)),-Os -pipe -fno-caller-saves)
+endif
+
+CUR_SUBTARGET:=$(SUBTARGET)
+ifeq ($(SUBTARGETS),)
+ CUR_SUBTARGET := default
endif
define BuildTargets/DumpCurrent
.PHONY: dumpinfo
+ dumpinfo : export DESCRIPTION=$$(Target/Description)
dumpinfo:
@echo 'Target: $(TARGETID)'; \
echo 'Target-Board: $(BOARD)'; \
echo 'Target-Name: $(BOARDNAME)$(if $(SUBTARGETS),$(if $(SUBTARGET),))'; \
- echo 'Target-Path: $(subst $(TOPDIR)/,,$(PWD))'; \
echo 'Target-Arch: $(ARCH)'; \
- echo 'Target-Arch-Packages: $(if $(ARCH_PACKAGES),$(ARCH_PACKAGES),$(BOARD))'; \
+ echo 'Target-Arch-Packages: $(if $(ARCH_PACKAGES),$(ARCH_PACKAGES),$(ARCH)$(if $(CPU_TYPE),_$(CPU_TYPE))$(if $(CPU_SUBTYPE),_$(CPU_SUBTYPE)))'; \
echo 'Target-Features: $(FEATURES)'; \
echo 'Target-Depends: $(DEPENDS)'; \
echo 'Target-Optimization: $(if $(CFLAGS),$(CFLAGS),$(DEFAULT_CFLAGS))'; \
+ echo 'CPU-Type: $(CPU_TYPE)$(if $(CPU_SUBTYPE),+$(CPU_SUBTYPE))'; \
echo 'Linux-Version: $(LINUX_VERSION)'; \
echo 'Linux-Release: $(LINUX_RELEASE)'; \
echo 'Linux-Kernel-Arch: $(LINUX_KARCH)'; \
- $(if $(SUBTARGET),,$(if $(DEFAULT_SUBTARGET), echo 'Default-Subtarget: $(DEFAULT_SUBTARGET)'; ))
+ $(if $(SUBTARGET),,$(if $(DEFAULT_SUBTARGET), echo 'Default-Subtarget: $(DEFAULT_SUBTARGET)'; )) \
echo 'Target-Description:'; \
- $(SH_FUNC) getvar $(call shvar,Target/Description); \
+ echo "$$$$DESCRIPTION"; \
echo '@@'; \
- echo 'Default-Packages: $(DEFAULT_PACKAGES)'; \
+ echo 'Default-Packages: $(DEFAULT_PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES))'; \
$(DUMPINFO)
+ $(if $(CUR_SUBTARGET),$(SUBMAKE) -r --no-print-directory -C image -s DUMP=1 SUBTARGET=$(CUR_SUBTARGET))
$(if $(SUBTARGET),,@$(foreach SUBTARGET,$(SUBTARGETS),$(SUBMAKE) -s DUMP=1 SUBTARGET=$(SUBTARGET); ))
endef