DEVICE_TYPE?=router
# Default packages - the really basic set
-DEFAULT_PACKAGES:=base-files libc libgcc busybox dropbear mtd uci opkg netifd
+DEFAULT_PACKAGES:=base-files libc libgcc busybox dropbear mtd uci opkg netifd fstools
# For router targets
-DEFAULT_PACKAGES.router:=dnsmasq iptables ip6tables ppp ppp-mod-pppoe kmod-ipt-nathelper firewall 6relayd odhcp6c
+DEFAULT_PACKAGES.router:=dnsmasq iptables ip6tables ppp ppp-mod-pppoe kmod-ipt-nathelper firewall odhcpd odhcp6c
DEFAULT_PACKAGES.bootloader:=
ifneq ($(DUMP),)
# Add device specific packages (here below to allow device type set from subtarget)
DEFAULT_PACKAGES += $(DEFAULT_PACKAGES.$(DEVICE_TYPE))
+filter_packages = $(filter-out -% $(patsubst -%,%,$(filter -%,$(1))),$(1))
+extra_packages = $(if $(filter wpad-mini wpad nas,$(1)),iwinfo)
+
define Profile/Default
NAME:=
PACKAGES:=
DUMPINFO += \
echo "Target-Profile: $(1)"; \
echo "Target-Profile-Name: $(NAME)"; \
- echo "Target-Profile-Packages: $(PACKAGES)"; \
+ echo "Target-Profile-Packages: $(PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES) $(PACKAGES))"; \
if [ -f ./config/profile-$(1) ]; then \
echo "Target-Profile-Kconfig: yes"; \
fi; \
$(SH_FUNC) getvar "$(call shvar,Profile/$(1)/Description)"; \
echo "@@"; \
echo;
- ifeq ($(CONFIG_TARGET_$(call target_conf,$(BOARD)_$(if $(SUBTARGET),$(SUBTARGET)_)$(1))),y)
+ ifeq ($(CONFIG_TARGET_$(call target_conf,$(BOARD)_$(if $(SUBTARGET),$(SUBTARGET)_))$(1)),y)
PROFILE=$(1)
endif
endef
.SILENT: $(TMP_CONFIG)
.PRECIOUS: $(TMP_CONFIG)
+ ifneq ($(CONFIG_OF),)
+ FEATURES += dt
+ endif
ifneq ($(CONFIG_GENERIC_GPIO)$(CONFIG_GPIOLIB),)
FEATURES += gpio
endif
CPU_CFLAGS_mips64 = -mips64 -mtune=mips64 -mabi=64
CPU_CFLAGS_24kec = -mips32r2 -mtune=24kec
CPU_CFLAGS_34kc = -mips32r2 -mtune=34kc
+ CPU_CFLAGS_74kc = -mips32r2 -mtune=74kc
CPU_CFLAGS_dsp = -mdsp
CPU_CFLAGS_dsp2 = -mdspr2
endif
endif
ifneq ($(findstring arm,$(ARCH)),)
CPU_TYPE ?= xscale
- CPU_CFLAGS_arm920t = -march=armv4t -mtune=arm920t
+ CPU_CFLAGS_arm920t = -march=armv4t -mtune=arm920t
CPU_CFLAGS_arm926ej-s = -march=armv5te -mtune=arm926ej-s
CPU_CFLAGS_arm1136j-s = -march=armv6 -mtune=arm1136j-s
CPU_CFLAGS_arm1176jzf-s = -march=armv6 -mtune=arm1176jzf-s
+ CPU_CFLAGS_cortex-a7 = -march=armv7-a -mtune=cortex-a7
+ CPU_CFLAGS_cortex-a8 = -march=armv7-a -mtune=cortex-a8
CPU_CFLAGS_cortex-a9 = -march=armv7-a -mtune=cortex-a9
+ CPU_CFLAGS_cortex-a15 = -march=armv7-a -mtune=cortex-a15
CPU_CFLAGS_fa526 = -march=armv4 -mtune=fa526
CPU_CFLAGS_mpcore = -march=armv6k -mtune=mpcore
- CPU_CFLAGS_xscale = march=armv5te -mtune=xscale
- CPU_CFLAGS_vfp = -mfpu=vfp -mfloat-abi=softfp
- CPU_CFLAGS_vfp3 = -mfpu=vfp3-d16 -mfloat-abi=softfp
+ CPU_CFLAGS_xscale = -march=armv5te -mtune=xscale
+ ifeq ($(CONFIG_SOFT_FLOAT),)
+ CPU_CFLAGS_neon = -mfpu=neon
+ CPU_CFLAGS_vfp = -mfpu=vfp
+ CPU_CFLAGS_vfpv3 = -mfpu=vfpv3-d16
+ endif
endif
ifeq ($(ARCH),powerpc)
CPU_CFLAGS_603e:=-mcpu=603e
echo 'Target-Description:'; \
$(SH_FUNC) getvar $(call shvar,Target/Description); \
echo '@@'; \
- echo 'Default-Packages: $(DEFAULT_PACKAGES)'; \
+ echo 'Default-Packages: $(DEFAULT_PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES))'; \
$(DUMPINFO)
$(if $(SUBTARGET),,@$(foreach SUBTARGET,$(SUBTARGETS),$(SUBMAKE) -s DUMP=1 SUBTARGET=$(SUBTARGET); ))
endef