#define _SPL_H_
#include <binman_sym.h>
+#include <linker_lists.h>
/* Platform-specific defines */
#include <linux/compiler.h>
+#include <asm/global_data.h>
#include <asm/spl.h>
#include <handoff.h>
+struct blk_desc;
+struct image_header;
+
/* Value in r0 indicates we booted from U-Boot */
#define UBOOT_NOT_LOADED_FROM_SPL 0x13578642
#define MMCSD_MODE_FS 2
#define MMCSD_MODE_EMMCBOOT 3
+struct blk_desc;
+struct image_header;
+
/*
* u_boot_first_phase() - check if this is the first U-Boot phase
*
* We need to know the position of U-Boot in memory so we can jump to it. We
* allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin,
* u-boot.img), hence the '_any'. These is no checking here that the correct
- * image is found. For * example if u-boot.img is used we don't check that
+ * image is found. For example if u-boot.img is used we don't check that
* spl_parse_image_header() can parse a valid header.
+ *
+ * Similarly for SPL, so that TPL can jump to SPL.
*/
binman_sym_extern(ulong, u_boot_any, image_pos);
+binman_sym_extern(ulong, u_boot_any, size);
+binman_sym_extern(ulong, spl, image_pos);
+binman_sym_extern(ulong, spl, size);
+
+/**
+ * spl_get_image_pos() - get the image position of the next phase
+ *
+ * This returns the image position to use to load the next phase of U-Boot
+ */
+ulong spl_get_image_pos(void);
+
+/**
+ * spl_get_image_size() - get the size of the next phase
+ *
+ * This returns the size to use to load the next phase of U-Boot
+ */
+ulong spl_get_image_size(void);
/**
* spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
#define SPL_COPY_PAYLOAD_ONLY 1
#define SPL_FIT_FOUND 2
+/**
+ * spl_load_legacy_img() - Loads a legacy image from a device.
+ * @spl_image: Image description to set up
+ * @load: Structure containing the information required to load data.
+ * @header: Pointer to image header (including appended image)
+ *
+ * Reads an legacy image from the device. Loads u-boot image to
+ * specified load address.
+ * Returns 0 on success.
+ */
+int spl_load_legacy_img(struct spl_image_info *spl_image,
+ struct spl_load_info *load, ulong header);
+
/**
* spl_load_imx_container() - Loads a imx container image from a device.
* @spl_image: Image description to set up
/* SPL common functions */
void preloader_console_init(void);
u32 spl_boot_device(void);
-u32 spl_boot_mode(const u32 boot_device);
-int spl_boot_partition(const u32 boot_device);
+
+/**
+ * spl_mmc_boot_mode() - Lookup function for the mode of an MMC boot source.
+ * @boot_device: ID of the device which the MMC driver wants to read
+ * from. Common values are e.g. BOOT_DEVICE_MMC1,
+ * BOOT_DEVICE_MMC2, BOOT_DEVICE_MMC2_2.
+ *
+ * This function should return one of MMCSD_MODE_FS, MMCSD_MODE_EMMCBOOT, or
+ * MMCSD_MODE_RAW for each MMC boot source which is defined for the target. The
+ * boot_device parameter tells which device the MMC driver is interested in.
+ *
+ * If not overridden, it is weakly defined in common/spl/spl_mmc.c.
+ *
+ * Note: It is important to use the boot_device parameter instead of e.g.
+ * spl_boot_device() as U-Boot is not always loaded from the same device as SPL.
+ */
+u32 spl_mmc_boot_mode(const u32 boot_device);
+
+/**
+ * spl_mmc_boot_partition() - MMC partition to load U-Boot from.
+ * @boot_device: ID of the device which the MMC driver wants to load
+ * U-Boot from.
+ *
+ * This function should return the partition number which the SPL
+ * should load U-Boot from (on the given boot_device) when
+ * CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is set.
+ *
+ * If not overridden, it is weakly defined in common/spl/spl_mmc.c.
+ */
+int spl_mmc_boot_partition(const u32 boot_device);
void spl_set_bd(void);
/**
void spl_board_prepare_for_linux(void);
void spl_board_prepare_for_boot(void);
int spl_board_ubi_load_image(u32 boot_device);
+int spl_board_boot_device(u32 boot_device);
/**
* jump_to_image_linux() - Jump to a Linux kernel from SPL
*/
void spl_invoke_atf(struct spl_image_info *spl_image);
+/**
+ * bl2_plat_get_bl31_params() - prepare params for bl31.
+ * @bl32_entry address of BL32 executable (secure)
+ * @bl33_entry address of BL33 executable (non secure)
+ * @fdt_addr address of Flat Device Tree
+ *
+ * This function assigns a pointer to the memory that the platform has kept
+ * aside to pass platform specific and trusted firmware related information
+ * to BL31. This memory is allocated by allocating memory to
+ * bl2_to_bl31_params_mem structure which is a superset of all the
+ * structure whose information is passed to BL31
+ * NOTE: This function should be called only once and should be done
+ * before generating params to BL31
+ *
+ * @return bl31 params structure pointer
+ */
+struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl32_entry,
+ uintptr_t bl33_entry,
+ uintptr_t fdt_addr);
+
/**
* spl_optee_entry - entry function for optee
*
*/
struct image_header *spl_get_load_buffer(ssize_t offset, size_t size);
+void spl_save_restore_data(void);
#endif