#define PCI_ANY_ID (~0)
struct pci_device_id {
- unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
+ unsigned long driver_data; /* Data private to the driver */
};
struct pci_controller;
int indirect_type;
+ /*
+ * TODO(sjg@chromium.org): With driver model we use struct
+ * pci_controller for both the controller and any bridge devices
+ * attached to it. But there is only one region list and it is in the
+ * top-level controller.
+ *
+ * This could be changed so that struct pci_controller is only used
+ * for PCI controllers and a separate UCLASS (or perhaps
+ * UCLASS_PCI_GENERIC) is used for bridges.
+ */
struct pci_region regions[MAX_PCI_REGIONS];
int region_count;
* */
u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
-/**
- * pciauto_setup_rom() - Set up access to a device ROM
- *
- * @hose: PCI hose to use
- * @dev: PCI device to adjust
- * @return 0 if done, -ve on error
- */
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
-
/**
* pci_hose_find_devices() - Find devices by vendor/device ID
*
/* Get access to a PCI bus' operations */
#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops)
+/**
+ * pci_get_bdf() - Get the BDF value for a device
+ *
+ * @dev: Device to check
+ * @return bus/device/function value (see PCI_BDF())
+ */
+pci_dev_t pci_get_bdf(struct udevice *dev);
+
/**
* pci_bind_bus_devices() - scan a PCI bus and bind devices
*
int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
struct udevice **emulp);
-#endif
+#endif /* CONFIG_DM_PCI */
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device. The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend, dev) \
+ .vendor = (vend), .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ * @subvend: the 16 bit PCI Subvendor ID
+ * @subdev: the 16 bit PCI Subdevice ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device with subsystem information.
+ */
+#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \
+ .vendor = (vend), .device = (dev), \
+ .subvendor = (subvend), .subdevice = (subdev)
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class. The vendor, device, subvendor, and subdevice
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \
+ .class = (dev_class), .class_mask = (dev_class_mask), \
+ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vend: the vendor name
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vend, dev) \
+ .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+
+/**
+ * struct pci_driver_entry - Matches a driver to its pci_device_id list
+ * @driver: Driver to use
+ * @match: List of match records for this driver, terminated by {}
+ */
+struct pci_driver_entry {
+ struct driver *driver;
+ const struct pci_device_id *match;
+};
+
+#define U_BOOT_PCI_DEVICE(__name, __match) \
+ ll_entry_declare(struct pci_driver_entry, __name, pci_driver_entry) = {\
+ .driver = llsym(struct driver, __name, driver), \
+ .match = __match, \
+ }
#endif /* __ASSEMBLY__ */
#endif /* _PCI_H */