* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
+#define PCI_STD_HEADER_SIZEOF 64
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
#define PCI_BASE_ADDRESS_IO_MASK (~0x03ULL)
/* bit 1 is reserved if address_space = 1 */
+/* Convert a regsister address (e.g. PCI_BASE_ADDRESS_1) to a bar # (e.g. 1) */
+#define pci_offset_to_barnum(offset) \
+ (((offset) - PCI_BASE_ADDRESS_0) / sizeof(u32))
+
/* Header type 0 (normal devices) */
#define PCI_CARDBUS_CIS 0x28
#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
+#define PCI_CAP_ID_DBG 0x0A /* Debug port */
+#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
+#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
+#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
+#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_ID_EA 0x14 /* PCI Enhanced Allocation */
+#define PCI_CAP_ID_MAX PCI_CAP_ID_EA
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
+#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */
#define PCI_MSI_RFU 3 /* Rest of capability flags */
#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */
+#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */
+#define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM
+
+/* Enhanced Allocation Registers */
+#define PCI_EA_NUM_ENT 2 /* Number of Capability Entries */
+#define PCI_EA_NUM_ENT_MASK 0x3f /* Num Entries Mask */
+#define PCI_EA_FIRST_ENT 4 /* First EA Entry in List */
+#define PCI_EA_ES 0x00000007 /* Entry Size */
+#define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */
+/* Base, MaxOffset registers */
+/* bit 0 is reserved */
+#define PCI_EA_IS_64 0x00000002 /* 64-bit field flag */
+#define PCI_EA_FIELD_MASK 0xfffffffc /* For Base & Max Offset */
+
+/* PCI Express capabilities */
+#define PCI_EXP_DEVCAP 4 /* Device capabilities */
+#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL 8 /* Device Control */
+#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
/* Include the ID list */
typedef int pci_dev_t;
#define PCI_BUS(d) (((d) >> 16) & 0xff)
+
+/*
+ * Please note the difference in DEVFN usage in U-Boot vs Linux. U-Boot
+ * uses DEVFN in bits 15-8 but Linux instead expects DEVFN in bits 7-0.
+ * Please see the Linux header include/uapi/linux/pci.h for more details.
+ * This is relevant for the following macros:
+ * PCI_DEV, PCI_FUNC, PCI_DEVFN
+ * The U-Boot macro PCI_DEV is equivalent to the Linux PCI_SLOT version with
+ * the remark from above (input d in bits 15-8 instead of 7-0.
+ */
#define PCI_DEV(d) (((d) >> 11) & 0x1f)
#define PCI_FUNC(d) (((d) >> 8) & 0x7)
#define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8)
+
#define PCI_MASK_BUS(bdf) ((bdf) & 0xffff)
#define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn))
#define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f))
extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
pci_dev_t pci_find_class(unsigned int find_class, int index);
-extern int pci_hose_config_device(struct pci_controller *hose,
- pci_dev_t dev,
- unsigned long io,
- pci_addr_t mem,
- unsigned long command);
-
extern int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev,
int cap);
extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev,
*
* Every device on a PCI bus has this per-child data.
*
- * It can be accessed using dev_get_parent_priv(dev) if dev->parent is a
+ * It can be accessed using dev_get_parent_platdata(dev) if dev->parent is a
* PCI bus (i.e. UCLASS_PCI)
*
* @devfn: Encoded device and function index - see PCI_DEVFN()
* dm_pci_map_bar() - get a virtual address associated with a BAR region
*
* Looks up a base address register and finds the physical memory address
- * that corresponds to it
+ * that corresponds to it.
+ * Can be used for 32b BARs 0-5 on type 0 functions and for 32b BARs 0-1 on
+ * type 1 functions.
+ * Can also be used on type 0 functions that support Enhanced Allocation for
+ * 32b/64b BARs. Note that duplicate BEI entries are not supported.
*
* @dev: Device to check
- * @bar: Bar number to read (numbered from 0)
+ * @bar: Bar register offset (PCI_BASE_ADDRESS_...)
* @flags: Flags for the region type (PCI_REGION_...)
- * @return: pointer to the virtual address to use
+ * @return: pointer to the virtual address to use or 0 on error
*/
void *dm_pci_map_bar(struct udevice *dev, int bar, int flags);
+/**
+ * dm_pci_find_next_capability() - find a capability starting from an offset
+ *
+ * Tell if a device supports a given PCI capability. Returns the
+ * address of the requested capability structure within the device's
+ * PCI configuration space or 0 in case the device does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ * %PCI_CAP_ID_MSIX MSI-X
+ *
+ * See PCI_CAP_ID_xxx for the complete capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @start: offset to start from
+ * @cap: capability code
+ * @return: capability address or 0 if not supported
+ */
+int dm_pci_find_next_capability(struct udevice *dev, u8 start, int cap);
+
+/**
+ * dm_pci_find_capability() - find a capability
+ *
+ * Tell if a device supports a given PCI capability. Returns the
+ * address of the requested capability structure within the device's
+ * PCI configuration space or 0 in case the device does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ * %PCI_CAP_ID_MSIX MSI-X
+ *
+ * See PCI_CAP_ID_xxx for the complete capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @cap: capability code
+ * @return: capability address or 0 if not supported
+ */
+int dm_pci_find_capability(struct udevice *dev, int cap);
+
+/**
+ * dm_pci_find_next_ext_capability() - find an extended capability
+ * starting from an offset
+ *
+ * Tell if a device supports a given PCI express extended capability.
+ * Returns the address of the requested extended capability structure
+ * within the device's PCI configuration space or 0 in case the device
+ * does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
+ * %PCI_EXT_CAP_ID_VC Virtual Channel
+ * %PCI_EXT_CAP_ID_DSN Device Serial Number
+ * %PCI_EXT_CAP_ID_PWR Power Budgeting
+ *
+ * See PCI_EXT_CAP_ID_xxx for the complete extended capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @start: offset to start from
+ * @cap: extended capability code
+ * @return: extended capability address or 0 if not supported
+ */
+int dm_pci_find_next_ext_capability(struct udevice *dev, int start, int cap);
+
+/**
+ * dm_pci_find_ext_capability() - find an extended capability
+ *
+ * Tell if a device supports a given PCI express extended capability.
+ * Returns the address of the requested extended capability structure
+ * within the device's PCI configuration space or 0 in case the device
+ * does not support it.
+ *
+ * Possible values for @cap:
+ *
+ * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
+ * %PCI_EXT_CAP_ID_VC Virtual Channel
+ * %PCI_EXT_CAP_ID_DSN Device Serial Number
+ * %PCI_EXT_CAP_ID_PWR Power Budgeting
+ *
+ * See PCI_EXT_CAP_ID_xxx for the complete extended capability ID codes.
+ *
+ * @dev: PCI device to query
+ * @cap: extended capability code
+ * @return: extended capability address or 0 if not supported
+ */
+int dm_pci_find_ext_capability(struct udevice *dev, int cap);
+
+/**
+ * dm_pci_flr() - Perform FLR if the device suppoorts it
+ *
+ * @dev: PCI device to reset
+ * @return: 0 if OK, -ENOENT if FLR is not supported by dev
+ */
+int dm_pci_flr(struct udevice *dev);
+
#define dm_pci_virt_to_bus(dev, addr, flags) \
dm_pci_phys_to_bus(dev, (virt_to_phys(addr)), (flags))
#define dm_pci_bus_to_virt(dev, addr, flags, len, map_flags) \
* struct dm_pci_emul_ops - PCI device emulator operations
*/
struct dm_pci_emul_ops {
- /**
- * get_devfn(): Check which device and function this emulators
- *
- * @dev: device to check
- * @return the device and function this emulates, or -ve on error
- */
- int (*get_devfn)(struct udevice *dev);
/**
* read_config() - Read a PCI configuration value
*
int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
struct udevice **containerp, struct udevice **emulp);
+/**
+ * pci_get_devfn() - Extract the devfn from fdt_pci_addr of the device
+ *
+ * Get devfn from fdt_pci_addr of the specified device
+ *
+ * @dev: PCI device
+ * @return devfn in bits 15...8 if found, -ENODEV if not found
+ */
+int pci_get_devfn(struct udevice *dev);
+
#endif /* CONFIG_DM_PCI */
/**
projects / oweals / u-boot.git / blobdiff