* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*-----------------------------------------------------------------------
* ISB bit in IMMR to set internal memory map
#define SIUMCR_DBPC01 0x00080000 /* - " - */
#define SIUMCR_DBPC10 0x00100000 /* - " - */
#define SIUMCR_DBPC11 0x00180000 /* - " - */
+#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
+#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
+#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
+#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
#define SIUMCR_DLK 0x00010000 /* Debug Register Lock */
#define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */
#define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */
* PISCR - Periodic Interrupt Status and Control Register
*/
#define PISCR_PITF ((ushort)0x0002) /* PIT stops when FREEZE */
+#define PISCR_PS 0x0080 /* Periodic Interrupt Status */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
#define PLPRCR_DIVF_MSK 0x0000001f /* DIVF mask */
#define PLPRCR_CSRC_MSK 0x00000400 /* CSRC mask */
#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
-#define PLPRCR_DIVF_0 0x00900000 /* Division factor 0 */
-#define PLPRCR_MF_9 0x00000000 /* Mulitipliaction factor 9 */
+#define PLPRCR_DIVF_0 0x00000000 /* Division factor 0 */
+#define PLPRCR_MF_9 0x00900000 /* Mulitipliaction factor 9 */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */
#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */
+#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register
#define SCCR_TBS 0x02000000 /* Time Base Source */
#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
#define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */
+#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */
#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */
#define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */
#define BR_PS_16 0x00000800 /* 16 bit port size */
#define BR_PS_32 0x00000000 /* 32 bit port size */
#define BR_LBDIR 0x00000008 /* Late burst data in progess */
+#define BR_SETA 0x00000004 /* External Data Acknowledge */
#define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */
#define OR_SCY_1 0x00000000 /* 1 clock cycle wait state */
#define OR_SCY_8 0x00000080 /* 8 clock cycles wait states */
#define OR_BSCY 0x00000060 /* Burst beats length in clocks */
#define OR_ACS_10 0x00000600 /* Adress to chip-select setup */
#define OR_CSNT 0x00000800 /* Chip-select negotation time */
-#define OR_ETHR 0x00000000 /* Extended hold time on read */
+#define OR_ETHR 0x00000100 /* Extended hold time on read */
#define OR_ADDR_MK_FF 0xFF000000
#define OR_ADDR_MK_FFFF 0xFFFF0000