+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008 Semihalf
*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
#include "compiler.h"
#include <asm/byteorder.h>
+#include <stdbool.h>
/* Define this to avoid #ifdefs later on */
struct lmb;
#define IMAGE_ENABLE_FIT 1
#define IMAGE_ENABLE_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT 1
#define CONFIG_FIT_ENABLE_SHA256_SUPPORT
#define CONFIG_SHA1
#define CONFIG_SHA256
# define IMAGE_ENABLE_SHA1 1
# endif
# else
-# define CONFIG_CRC32 /* FIT images need CRC32 support */
# define IMAGE_ENABLE_CRC32 1
# define IMAGE_ENABLE_MD5 1
# define IMAGE_ENABLE_SHA1 1
* Operating System Codes
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_OS_INVALID = 0, /* Invalid OS */
IH_OS_OPENRTOS, /* OpenRTOS */
IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
IH_OS_TEE, /* Trusted Execution Environment */
+ IH_OS_OPENSBI, /* RISC-V OpenSBI */
IH_OS_COUNT,
};
* CPU Architecture Codes (supported by Linux)
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_ARCH_INVALID = 0, /* Invalid CPU */
* as command interpreter (=> Shell Scripts).
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
- IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */
+ IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
IH_TYPE_LOADABLE, /* A list of typeless images */
IH_TYPE_RKSPI, /* Rockchip SPI image */
IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
+ IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
IH_TYPE_FPGA, /* FPGA Image */
IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
+ IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
+ IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
+ IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
+ IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
+ IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
IH_TYPE_COUNT, /* Number of image types */
};
* Compression Types
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_COMP_NONE = 0, /* No Compression Used */
IH_COMP_COUNT,
};
+#define LZ4F_MAGIC 0x184D2204 /* LZ4 Magic Number */
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
* all data in network byte order (aka natural aka bigendian).
*/
typedef struct image_header {
- __be32 ih_magic; /* Image Header Magic Number */
- __be32 ih_hcrc; /* Image Header CRC Checksum */
- __be32 ih_time; /* Image Creation Timestamp */
- __be32 ih_size; /* Image Data Size */
- __be32 ih_load; /* Data Load Address */
- __be32 ih_ep; /* Entry Point Address */
- __be32 ih_dcrc; /* Image Data CRC Checksum */
+ uint32_t ih_magic; /* Image Header Magic Number */
+ uint32_t ih_hcrc; /* Image Header CRC Checksum */
+ uint32_t ih_time; /* Image Creation Timestamp */
+ uint32_t ih_size; /* Image Data Size */
+ uint32_t ih_load; /* Data Load Address */
+ uint32_t ih_ep; /* Entry Point Address */
+ uint32_t ih_dcrc; /* Image Data CRC Checksum */
uint8_t ih_os; /* Operating System */
uint8_t ih_arch; /* CPU architecture */
uint8_t ih_type; /* Image Type */
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if defined(CONFIG_LEGACY_IMAGE_FORMAT)
#define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
#endif
#define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
}
#endif /* USE_HOSTCC */
+/**
+ * image_decomp() - decompress an image
+ *
+ * @comp: Compression algorithm that is used (IH_COMP_...)
+ * @load: Destination load address in U-Boot memory
+ * @image_start Image start address (where we are decompressing from)
+ * @type: OS type (IH_OS_...)
+ * @load_bug: Place to decompress to
+ * @image_buf: Address to decompress from
+ * @image_len: Number of bytes in @image_buf to decompress
+ * @unc_len: Available space for decompression
+ * @return 0 if OK, -ve on error (BOOTM_ERR_...)
+ */
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end);
+
/**
* Set up properties in the FDT
*
* @image: Address of image
* @start: Returns start address of image
* @size : Returns size image
+ * @force_reloc: Ignore image->ep field, always place image to RAM start
* @return 0 if OK, 1 if the image was not recognised
*/
-int booti_setup(ulong image, ulong *relocated_addr, ulong *size);
+int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
+ bool force_reloc);
/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
#define FIT_DEFAULT_PROP "default"
#define FIT_SETUP_PROP "setup"
#define FIT_FPGA_PROP "fpga"
+#define FIT_FIRMWARE_PROP "firmware"
+#define FIT_STANDALONE_PROP "standalone"
#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
int fit_image_get_data_position(const void *fit, int noffset,
int *data_position);
int fit_image_get_data_size(const void *fit, int noffset, int *data_size);
+int fit_image_get_data_and_size(const void *fit, int noffset,
+ const void **data, size_t *size);
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
* @comment: Comment to add to signature nodes
* @require_keys: Mark all keys as 'required'
* @engine_id: Engine to use for signing
+ * @cmdname: Command name used when reporting errors
*
* Adds hash values for all component images in the FIT blob.
* Hashes are calculated for all component images which have hash subnodes
*/
int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
const char *comment, int require_keys,
- const char *engine_id);
+ const char *engine_id, const char *cmdname);
int fit_image_verify_with_data(const void *fit, int image_noffset,
const void *data, size_t size);
int fit_conf_find_compat(const void *fit, const void *fdt);
int fit_conf_get_node(const void *fit, const char *conf_uname);
+int fit_conf_get_prop_node_count(const void *fit, int noffset,
+ const char *prop_name);
+int fit_conf_get_prop_node_index(const void *fit, int noffset,
+ const char *prop_name, int index);
/**
* fit_conf_get_prop_node() - Get node refered to by a configuration
int fit_conf_get_prop_node(const void *fit, int noffset,
const char *prop_name);
-void fit_conf_print(const void *fit, int noffset, const char *p);
-
int fit_check_ramdisk(const void *fit, int os_noffset,
uint8_t arch, int verify);
* At present we only support signing on the host, and verification on the
* device
*/
-#if defined(CONFIG_FIT_SIGNATURE)
-# ifdef USE_HOSTCC
+#if defined(USE_HOSTCC)
+# if defined(CONFIG_FIT_SIGNATURE)
# define IMAGE_ENABLE_SIGN 1
# define IMAGE_ENABLE_VERIFY 1
-# include <openssl/evp.h>
-#else
+# include <openssl/evp.h>
+# else
# define IMAGE_ENABLE_SIGN 0
-# define IMAGE_ENABLE_VERIFY 1
+# define IMAGE_ENABLE_VERIFY 0
# endif
#else
# define IMAGE_ENABLE_SIGN 0
-# define IMAGE_ENABLE_VERIFY 0
+# define IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(FIT_SIGNATURE)
#endif
#ifdef USE_HOSTCC
int node_offset; /* Offset of signature node */
const char *name; /* Algorithm name */
struct checksum_algo *checksum; /* Checksum algorithm information */
+ struct padding_algo *padding; /* Padding algorithm information */
struct crypto_algo *crypto; /* Crypto algorithm information */
const void *fdt_blob; /* FDT containing public keys */
int required_keynode; /* Node offset of key to use: -1=any */
uint8_t *sig, uint sig_len);
};
+struct padding_algo {
+ const char *name;
+ int (*verify)(struct image_sign_info *info,
+ uint8_t *pad, int pad_len,
+ const uint8_t *hash, int hash_len);
+};
+
/**
* image_get_checksum_algo() - Look up a checksum algorithm
*
*/
struct crypto_algo *image_get_crypto_algo(const char *full_name);
+/**
+ * image_get_padding_algo() - Look up a padding algorithm
+ *
+ * @param name Name of padding algorithm
+ * @return pointer to algorithm information, or NULL if not found
+ */
+struct padding_algo *image_get_padding_algo(const char *name);
+
/**
* fit_image_verify_required_sigs() - Verify signatures marked as 'required'
*
ulong *second_data, ulong *second_len);
ulong android_image_get_end(const struct andr_img_hdr *hdr);
ulong android_image_get_kload(const struct andr_img_hdr *hdr);
+ulong android_image_get_kcomp(const struct andr_img_hdr *hdr);
void android_print_contents(const struct andr_img_hdr *hdr);
#endif /* CONFIG_ANDROID_BOOT_IMAGE */
projects / oweals / u-boot.git / blobdiff