+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008 Semihalf
*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
#include "compiler.h"
#include <asm/byteorder.h>
+#include <stdbool.h>
/* Define this to avoid #ifdefs later on */
struct lmb;
+struct fdt_region;
#ifdef USE_HOSTCC
#include <sys/types.h>
#if IMAGE_ENABLE_FIT
#include <hash.h>
-#include <libfdt.h>
+#include <linux/libfdt.h>
#include <fdt_support.h>
# ifdef CONFIG_SPL_BUILD
# ifdef CONFIG_SPL_CRC32_SUPPORT
IH_OS_OSE, /* OSE */
IH_OS_PLAN9, /* Plan 9 */
IH_OS_OPENRTOS, /* OpenRTOS */
+ IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
+ IH_OS_TEE, /* Trusted Execution Environment */
IH_OS_COUNT,
};
IH_ARCH_ARC, /* Synopsys DesignWare ARC */
IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
IH_ARCH_XTENSA, /* Xtensa */
+ IH_ARCH_RISCV, /* RISC-V */
IH_ARCH_COUNT,
};
IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
- IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */
+ IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
IH_TYPE_LOADABLE, /* A list of typeless images */
IH_TYPE_RKSPI, /* Rockchip SPI image */
IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
+ IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
IH_TYPE_FPGA, /* FPGA Image */
IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
+ IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
+ IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
+ IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
IH_TYPE_COUNT, /* Number of image types */
};
ulong genimg_get_kernel_addr(char * const img_addr);
int genimg_get_format(const void *img_addr);
int genimg_has_config(bootm_headers_t *images);
-ulong genimg_get_image(ulong img_addr);
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len);
* boot_get_loadable() will take the given FIT configuration, and look
* for a field named "loadables". Loadables, is a list of elements in
* the FIT given as strings. exe:
- * loadables = "linux_kernel@1", "fdt@2";
+ * loadables = "linux_kernel", "fdt-2";
* this function will attempt to parse each string, and load the
* corresponding element from the FIT into memory. Once placed,
* no aditional actions are taken.
int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
ulong *setup_start, ulong *setup_len);
+/**
+ * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays)
+ *
+ * This deals with all aspects of loading an DTB from a FIT.
+ * The correct base image based on configuration will be selected, and
+ * then any overlays specified will be applied (as present in fit_uname_configp).
+ *
+ * @param images Boot images structure
+ * @param addr Address of FIT in memory
+ * @param fit_unamep On entry this is the requested image name
+ * (e.g. "kernel") or NULL to use the default. On exit
+ * points to the selected image name
+ * @param fit_uname_configp On entry this is the requested configuration
+ * name (e.g. "conf-1") or NULL to use the default. On
+ * exit points to the selected configuration name.
+ * @param arch Expected architecture (IH_ARCH_...)
+ * @param datap Returns address of loaded image
+ * @param lenp Returns length of loaded image
+ *
+ * @return node offset of base image, or -ve error code on error
+ */
+int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
+ const char **fit_unamep, const char **fit_uname_configp,
+ int arch, ulong *datap, ulong *lenp);
+
/**
* fit_image_load() - load an image from a FIT
*
* @param images Boot images structure
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
- * (e.g. "kernel@1") or NULL to use the default. On exit
+ * (e.g. "kernel") or NULL to use the default. On exit
* points to the selected image name
* @param fit_uname_configp On entry this is the requested configuration
- * name (e.g. "conf@1") or NULL to use the default. On
+ * name (e.g. "conf-1") or NULL to use the default. On
* exit points to the selected configuration name.
* @param arch Expected architecture (IH_ARCH_...)
* @param image_type Required image type (IH_TYPE_...). If this is
/**
* fit_get_node_from_config() - Look up an image a FIT by type
*
- * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * This looks in the selected conf- node (images->fit_uname_cfg) for a
* particular image type (e.g. "kernel") and then finds the image that is
* referred to.
*
* For example, for something like:
*
* images {
- * kernel@1 {
+ * kernel {
* ...
* };
* };
* configurations {
- * conf@1 {
- * kernel = "kernel@1";
+ * conf-1 {
+ * kernel = "kernel";
* };
* };
*
* the function will return the node offset of the kernel@1 node, assuming
- * that conf@1 is the chosen configuration.
+ * that conf-1 is the chosen configuration.
*
* @param images Boot images structure
* @param prop_name Property name to look up (FIT_..._PROP)
int image_check_hcrc(const image_header_t *hdr);
int image_check_dcrc(const image_header_t *hdr);
#ifndef USE_HOSTCC
-ulong getenv_bootm_low(void);
-phys_size_t getenv_bootm_size(void);
-phys_size_t getenv_bootm_mapsize(void);
+ulong env_get_bootm_low(void);
+phys_size_t env_get_bootm_size(void);
+phys_size_t env_get_bootm_mapsize(void);
#endif
void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
*/
int bootz_setup(ulong image, ulong *start, ulong *end);
+/**
+ * Return the correct start address and size of a Linux aarch64 Image.
+ *
+ * @image: Address of image
+ * @start: Returns start address of image
+ * @size : Returns size image
+ * @force_reloc: Ignore image->ep field, always place image to RAM start
+ * @return 0 if OK, 1 if the image was not recognised
+ */
+int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
+ bool force_reloc);
/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
/* image node */
#define FIT_DATA_PROP "data"
+#define FIT_DATA_POSITION_PROP "data-position"
#define FIT_DATA_OFFSET_PROP "data-offset"
#define FIT_DATA_SIZE_PROP "data-size"
#define FIT_TIMESTAMP_PROP "timestamp"
#define FIT_DEFAULT_PROP "default"
#define FIT_SETUP_PROP "setup"
#define FIT_FPGA_PROP "fpga"
+#define FIT_FIRMWARE_PROP "firmware"
+#define FIT_STANDALONE_PROP "standalone"
#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
int fit_image_get_data(const void *fit, int noffset,
const void **data, size_t *size);
int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset);
+int fit_image_get_data_position(const void *fit, int noffset,
+ int *data_position);
int fit_image_get_data_size(const void *fit, int noffset, int *data_size);
+int fit_image_get_data_and_size(const void *fit, int noffset,
+ const void **data, size_t *size);
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
* @comment: Comment to add to signature nodes
* @require_keys: Mark all keys as 'required'
* @engine_id: Engine to use for signing
+ * @cmdname: Command name used when reporting errors
*
* Adds hash values for all component images in the FIT blob.
* Hashes are calculated for all component images which have hash subnodes
*/
int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
const char *comment, int require_keys,
- const char *engine_id);
+ const char *engine_id, const char *cmdname);
+int fit_image_verify_with_data(const void *fit, int image_noffset,
+ const void *data, size_t size);
int fit_image_verify(const void *fit, int noffset);
int fit_config_verify(const void *fit, int conf_noffset);
int fit_all_image_verify(const void *fit);
* @noffset: Offset of conf@xxx node to check
* @prop_name: Property to read from the conf node
*
- * The conf@ nodes contain references to other nodes, using properties
- * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
+ * The conf- nodes contain references to other nodes, using properties
+ * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"),
* return the offset of the node referred to (e.g. offset of node
- * "/images/kernel@1".
+ * "/images/kernel".
*/
int fit_conf_get_prop_node(const void *fit, int noffset,
const char *prop_name);
-void fit_conf_print(const void *fit, int noffset, const char *p);
-
int fit_check_ramdisk(const void *fit, int os_noffset,
uint8_t arch, int verify);
ulong *os_data, ulong *os_len);
int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
ulong *rd_data, ulong *rd_len);
+int android_image_get_second(const struct andr_img_hdr *hdr,
+ ulong *second_data, ulong *second_len);
ulong android_image_get_end(const struct andr_img_hdr *hdr);
ulong android_image_get_kload(const struct andr_img_hdr *hdr);
void android_print_contents(const struct andr_img_hdr *hdr);
#define FDT_ERROR ((ulong)(-1))
ulong fdt_getprop_u32(const void *fdt, int node, const char *prop);
+
+/**
+ * fit_find_config_node() - Find the node for the best DTB in a FIT image
+ *
+ * A FIT image contains one or more DTBs. This function parses the
+ * configurations described in the FIT images and returns the node of
+ * the first matching DTB. To check if a DTB matches a board, this function
+ * calls board_fit_config_name_match(). If no matching DTB is found, it returns
+ * the node described by the default configuration if it exists.
+ *
+ * @fdt: pointer to flat device tree
+ * @return the node if found, -ve otherwise
+ */
int fit_find_config_node(const void *fdt);
/**