apalis-tk1: enable distroboot

[oweals/u-boot.git] / include / fsl_esdhc.h

diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 67d6057b5ff4637a0c6fdcd372cfc6c09c98a71a..e148eaa880477f0fc73794ad5ee26cdb477f6d4c 100644 (file)
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -1,34 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * FSL SD/MMC Defines
  *-------------------------------------------------------------------
  *
  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *-------------------------------------------------------------------
- *
+ * Copyright 2020 NXP
  */
 
 #ifndef  __FSL_ESDHC_H__
 #define        __FSL_ESDHC_H__
 
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/byteorder.h>
 
+/* needed for the mmc_cfg definition */
+#include <mmc.h>
+
+#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
+#include "../board/freescale/common/qixis.h"
+#endif
+
 /* FSL eSDHC-specific constants */
 #define SYSCTL                 0x0002e02c
 #define SYSCTL_INITA           0x08000000
@@ -87,6 +78,9 @@
 #define IRQSTATEN_TC           (0x00000002)
 #define IRQSTATEN_CC           (0x00000001)
 
+#define ESDHCCTL               0x0002e40c
+#define ESDHCCTL_PCS           (0x00080000)
+
 #define PRSSTAT                        0x0002e024
 #define PRSSTAT_DAT0           (0x01000000)
 #define PRSSTAT_CLSL           (0x00800000)
@@ -95,6 +89,7 @@
 #define PRSSTAT_CINS           (0x00010000)
 #define PRSSTAT_BREN           (0x00000800)
 #define PRSSTAT_BWEN           (0x00000400)
+#define PRSSTAT_SDSTB          (0X00000008)
 #define PRSSTAT_DLA            (0x00000004)
 #define PRSSTAT_CICHB          (0x00000002)
 #define PRSSTAT_CIDHB          (0x00000001)
@@ -103,6 +98,8 @@
 #define PROCTL_INIT            0x00000020
 #define PROCTL_DTW_4           0x00000002
 #define PROCTL_DTW_8           0x00000004
+#define PROCTL_D3CD            0x00000008
+#define PROCTL_VOLT_SEL                0x00000400
 
 #define CMDARG                 0x0002e008
 
@@ -121,12 +118,13 @@
 #define XFERTYP_RSPTYP_48_BUSY 0x00030000
 #define XFERTYP_MSBSEL         0x00000020
 #define XFERTYP_DTDSEL         0x00000010
+#define XFERTYP_DDREN          0x00000008
 #define XFERTYP_AC12EN         0x00000004
 #define XFERTYP_BCEN           0x00000002
 #define XFERTYP_DMAEN          0x00000001
 
 #define CINS_TIMEOUT           1000
-#define PIO_TIMEOUT            100000
+#define PIO_TIMEOUT            500
 
 #define DSADDR         0x2e004
 
@@ -160,21 +158,36 @@
 #define BLKATTR_SIZE(x)        (x & 0x1fff)
 #define MAX_BLK_CNT    0x7fff  /* so malloc will have enough room with 32M */
 
-#define ESDHC_HOSTCAPBLT_VS18  0x04000000
-#define ESDHC_HOSTCAPBLT_VS30  0x02000000
-#define ESDHC_HOSTCAPBLT_VS33  0x01000000
-#define ESDHC_HOSTCAPBLT_SRS   0x00800000
-#define ESDHC_HOSTCAPBLT_DMAS  0x00400000
-#define ESDHC_HOSTCAPBLT_HSS   0x00200000
+/* Host controller capabilities register */
+#define HOSTCAPBLT_VS18                0x04000000
+#define HOSTCAPBLT_VS30                0x02000000
+#define HOSTCAPBLT_VS33                0x01000000
+#define HOSTCAPBLT_SRS         0x00800000
+#define HOSTCAPBLT_DMAS                0x00400000
+#define HOSTCAPBLT_HSS         0x00200000
 
 struct fsl_esdhc_cfg {
-       u32     esdhc_base;
+       phys_addr_t esdhc_base;
        u32     sdhc_clk;
        u8      max_bus_width;
+       int     vs18_enable; /* Use 1.8V if set to 1 */
+       struct mmc_config cfg;
 };
 
 /* Select the correct accessors depending on endianess */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
+#if defined CONFIG_SYS_FSL_ESDHC_LE
+#define esdhc_read32           in_le32
+#define esdhc_write32          out_le32
+#define esdhc_clrsetbits32     clrsetbits_le32
+#define esdhc_clrbits32                clrbits_le32
+#define esdhc_setbits32                setbits_le32
+#elif defined(CONFIG_SYS_FSL_ESDHC_BE)
+#define esdhc_read32            in_be32
+#define esdhc_write32           out_be32
+#define esdhc_clrsetbits32      clrsetbits_be32
+#define esdhc_clrbits32         clrbits_be32
+#define esdhc_setbits32         setbits_be32
+#elif __BYTE_ORDER == __LITTLE_ENDIAN
 #define esdhc_read32           in_le32
 #define esdhc_write32          out_le32
 #define esdhc_clrsetbits32     clrsetbits_le32
@@ -194,9 +207,15 @@ struct fsl_esdhc_cfg {
 int fsl_esdhc_mmc_init(bd_t *bis);
 int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
 void fdt_fixup_esdhc(void *blob, bd_t *bd);
+#ifdef MMC_SUPPORTS_TUNING
+static inline int fsl_esdhc_execute_tuning(struct udevice *dev,
+                                          uint32_t opcode) {return 0; }
+#endif
 #else
 static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
 static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
 #endif /* CONFIG_FSL_ESDHC */
+void __noreturn mmc_boot(void);
+void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
 
 #endif  /* __FSL_ESDHC_H__ */