arm: a320: fix multiline comment style

[oweals/u-boot.git] / include / configs / xm250.h

diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 2ff9a2813adc9f4e25ecb656ce97531b30416c60..32544fed5801610ca26f88ef9c13d9f9ecc7de2b 100644 (file)
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -35,9 +35,10 @@
 #define CONFIG_PXA250         1        /* This is an PXA250 CPU        */
 #define CONFIG_XM250          1        /* on a MicroSys XM250 Board    */
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
+#define        CONFIG_SYS_TEXT_BASE    0x0
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
@@ -45,7 +46,6 @@
  *
  */
 #define CONFIG_SYS_MALLOC_LEN          (256*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -61,6 +61,8 @@
 /*
  * I2C bus
  */
+#define CONFIG_I2C_MV                  1
+#define CONFIG_MV_I2C_REG              0x40301680
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED                   50000
 #define CONFIG_SYS_I2C_SLAVE                   0xfe
@@ -137,7 +139,6 @@
 #define CONFIG_CMDLINE_TAG      1       /* send commandline to Kernel          */
 #define CONFIG_SETUP_MEMORY_TAGS 1      /* send memory definition to kernel    */
 #define        CONFIG_INITRD_TAG        1       /* do not send initrd params           */
-#undef CONFIG_VFD                       /* do not send framebuffer setup       */
 
 /*
  * Stack sizes
@@ -175,7 +176,7 @@
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define        CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
 
 /*
  * FLASH and environment organization
@@ -322,9 +323,9 @@
  * Clocks, power control and interrupts
  */
 #define CONFIG_SYS_PSSR_VAL        0x00000030
-#define CONFIG_SYS_CCCR_VAL        0x00000161  /* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
-#define CONFIG_SYS_CKEN_VAL        0x000141ec  /* FFUART and STUART enabled    */
-#define CONFIG_SYS_ICMR_VAL        0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_CCCR                    0x00000161  /* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
+#define CONFIG_SYS_CKEN                    0x000141ec  /* FFUART and STUART enabled    */
+#define CONFIG_SYS_ICMR                    0x00000000  /* No interrupts enabled        */
 
 /* FIXME
  *
@@ -343,6 +344,8 @@
 #define CONFIG_SYS_MDCNFG_VAL      0x000009c9
 #define CONFIG_SYS_MDMRS_VAL       0x00220022
 #define CONFIG_SYS_MDREFR_VAL      0x000da018  /* Initial setting, individual bits set in lowlevel_init.S */
+#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
+#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)