colibri_imx6: remove legacy sdboot wrapper

[oweals/u-boot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index e498b422fe2d43018bb0f19d93748ca3877581c0..ee1ceebf1291872e342aa6b92f666a6d48e8018e 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -47,10 +47,6 @@
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_MAY_FAIL
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_SYS_MAX_NAND_DEVICE    1
 # define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -66,7 +62,6 @@
 #if defined(CONFIG_ZYNQMP_USB)
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT       300
-#define CONFIG_USB_CABLE_CHECK
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
        "dfu_ram_info=" \
@@ -104,44 +99,23 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define PHY_ANEG_TIMEOUT       20000
 #endif
 
-/* I2C */
-#if defined(CONFIG_SYS_I2C_ZYNQ)
-# define CONFIG_SYS_I2C
-#endif
-
-/* EEPROM */
-#ifdef CONFIG_ZYNQMP_EEPROM
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                2
-# define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-# define CONFIG_SYS_EEPROM_SIZE                        (64 * 1024)
-#endif
-
-#ifdef CONFIG_SATA_CEVA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                        CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
 
 #define CONFIG_CLOCKS
 
 #define ENV_MEM_LAYOUT_SETTINGS \
        "fdt_high=10000000\0" \
-       "initrd_high=10000000\0" \
        "fdt_addr_r=0x40000000\0" \
        "pxefile_addr_r=0x10000000\0" \
        "kernel_addr_r=0x18000000\0" \
-       "scriptaddr=0x02000000\0" \
+       "scriptaddr=0x20000000\0" \
        "ramdisk_addr_r=0x02100000\0" \
+       "script_offset_f=0x3e80000\0" \
+       "script_size_f=0x80000\0" \
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
@@ -173,8 +147,47 @@
 # define BOOT_TARGET_DEVICES_DHCP(func)
 #endif
 
+#if defined(CONFIG_ZYNQMP_GQSPI)
+# define BOOT_TARGET_DEVICES_QSPI(func)        func(QSPI, qspi, 0)
+#else
+# define BOOT_TARGET_DEVICES_QSPI(func)
+#endif
+
+#if defined(CONFIG_NAND_ARASAN)
+# define BOOT_TARGET_DEVICES_NAND(func)        func(NAND, nand, 0)
+#else
+# define BOOT_TARGET_DEVICES_NAND(func)
+#endif
+
+#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
+       "bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
+                      "sf read $scriptaddr $script_offset_f $script_size_f && " \
+                      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
+       #devtypel #instance " "
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+       "bootcmd_" #devtypel #instance "= nand info && " \
+                      "nand read $scriptaddr $script_offset_f $script_size_f && " \
+                      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+       #devtypel #instance " "
+
+#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
+
+#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
+       "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
+       "jtag "
+
 #define BOOT_TARGET_DEVICES(func) \
+       BOOT_TARGET_DEVICES_JTAG(func) \
        BOOT_TARGET_DEVICES_MMC(func) \
+       BOOT_TARGET_DEVICES_QSPI(func) \
+       BOOT_TARGET_DEVICES_NAND(func) \
        BOOT_TARGET_DEVICES_USB(func) \
        BOOT_TARGET_DEVICES_SCSI(func) \
        BOOT_TARGET_DEVICES_PXE(func) \
@@ -191,7 +204,7 @@
 #endif
 
 /* SPL can't handle all huge variables - define just DFU */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 #undef CONFIG_EXTRA_ENV_SETTINGS
 # define CONFIG_EXTRA_ENV_SETTINGS \
        "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
@@ -201,7 +214,6 @@
        "dfu_bufsiz=0x1000\0"
 #endif
 
-#define CONFIG_SPL_TEXT_BASE           0xfffc0000
 #define CONFIG_SPL_STACK               0xfffffffc
 #define CONFIG_SPL_MAX_SIZE            0x40000
 
@@ -213,8 +225,6 @@
 # define CONFIG_SYS_SPI_KERNEL_OFFS    0x80000
 # define CONFIG_SYS_SPI_ARGS_OFFS      0xa0000
 # define CONFIG_SYS_SPI_ARGS_SIZE      0xa0000
-
-# define CONFIG_SYS_SPI_U_BOOT_OFFS    0x170000
 #endif
 
 /* u-boot is like dtb */
@@ -236,7 +246,7 @@
 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME       "u-boot.img"
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 # undef CONFIG_CMD_BOOTD
 # define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH_SUPPORT