*/
#define CONFIG_PXA250 1 /* This is an PXA255 CPU */
#define CONFIG_XAENIAX 1 /* on a xaeniax board */
+#define CONFIG_SYS_TEXT_BASE 0x0
-#define BOARD_LATE_INIT 1
+#define CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
+
/*
* select serial console configuration
*/
+#define CONFIG_PXA_SERIAL
#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */
* used for the RAM copy of the uboot code
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Miscellaneous configurable options
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
/*
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
+
/*
* FLASH and environment organization
*/
/*
* SMSC91C111 Network Card
*/
-#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111 1
#define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */
#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
*/
#define CONFIG_SYS_PSSR_VAL 0x00000030
-#define CONFIG_SYS_CKEN_VAL 0x00000080 /* */
-#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_CKEN 0x00000080 /* */
+#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
/*
*/
#define CONFIG_SYS_MDMRS_VAL 0x00320032
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x00000000
+
/*
* PCMCIA and CF Interfaces
*/