bmips: configs: switch to size definitions

[oweals/u-boot.git] / include / configs / woodburn_common.h

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 7ab60fd7ce1f7392b6e2c44f685d8bb1aa8a22d6..5ad3dab51c4a952bec80096530f692142565305c 100644 (file)
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
  *
  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
  *
  * Configuration for the woodburn board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __WOODBURN_COMMON_CONFIG_H
@@ -18,8 +17,6 @@
 #define CONFIG_MX35_HCLK_FREQ  24000000
 #define CONFIG_SYS_FSL_CLK
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
 /* This is required to setup the ESDC controller */
@@ -43,8 +40,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         0
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /* PMIC Controller */
 #define CONFIG_POWER
@@ -55,7 +50,6 @@
 #define CONFIG_RTC_MC13XXX
 
 /* mmc driver */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
@@ -67,16 +61,10 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX      1
 
 /*
  * Command definition
  */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
-
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT 100
 
@@ -90,7 +78,6 @@
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
-#define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
 #define CONFIG_ARP_TIMEOUT     200UL
@@ -98,10 +85,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_AUTO_COMPLETE
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
@@ -111,7 +94,6 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (256 * 1024 * 1024)
 
@@ -126,9 +108,6 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
 
 /*
  * FLASH and environment organization
@@ -153,12 +132,8 @@
 /*
  * CFI FLASH driver setup
  */
-#define CONFIG_SYS_FLASH_CFI           /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER
 
 /* A non-standard buffered write algorithm */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      /* faster */
-#define CONFIG_SYS_FLASH_PROTECTION    /* Use hardware sector protection */
 
 /*
  * NAND FLASH driver setup
@@ -177,7 +152,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME woodburn
+#define CONFIG_HOSTNAME "woodburn"
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -195,9 +170,9 @@
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
-       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
+       "hostname=" CONFIG_HOSTNAME "\0"                        \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
+       "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -211,7 +186,7 @@
                "run ramargs addip addtty addmtd addmisc;"              \
                "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
                "else echo Images not loades;fi\0"                      \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
        "update=protect off ${uboot_addr} +80000;"                      \