env: Finish migration of common ENV options

[oweals/u-boot.git] / include / configs / wb45n.h

diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h
index 8989d55f53b085c18b4f7a73788502cdbdeac04d..36060975c10eef002cbd10d649f071f1f49a731c 100644 (file)
--- a/include/configs/wb45n.h
+++ b/include/configs/wb45n.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the WB45N CPU Module.
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
@@ -9,8 +8,6 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_TEXT_BASE        0x23f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK  32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK  12000000   /* 12 MHz crystal */
@@ -33,12 +30,8 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS        1
 #define CONFIG_SYS_SDRAM_BASE       0x20000000
 #define CONFIG_SYS_SDRAM_SIZE       0x04000000 /* 64 MB */
 
@@ -46,7 +39,6 @@
     (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE  1
 #define CONFIG_SYS_NAND_BASE        0x40000000
 /* our ALE is AD21 */
@@ -56,15 +48,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN  AT91_PIN_PD4
 #define CONFIG_SYS_NAND_READY_PIN   AT91_PIN_PD5
 
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC     1
-#define CONFIG_ATMEL_NAND_HW_PMECC  1
-#define CONFIG_PMECC_CAP            4
-#define CONFIG_PMECC_SECTOR_SIZE    512
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 
@@ -83,9 +66,6 @@
 
 #ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET           0xa0000
-#define CONFIG_ENV_OFFSET_REDUND    0xc0000
-#define CONFIG_ENV_SIZE             0x20000    /* 1 block = 128 kB */
 
 #define CONFIG_BOOTCOMMAND  "nand read 0x22000000 0xe0000 0x280000; " \
     "run _mtd; bootm"
@@ -120,9 +100,6 @@
 
 #define CONFIG_SYS_CBSIZE   256
 #define CONFIG_SYS_MAXARGS  16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /*
  * Size of malloc() pool
@@ -130,8 +107,6 @@
 #define CONFIG_SYS_MALLOC_LEN       (512 * 1024 + 0x1000)
 
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE        0x300000
 #define CONFIG_SPL_MAX_SIZE         0x6000
 #define CONFIG_SPL_STACK            0x308000
 
@@ -156,6 +131,5 @@
 #define CONFIG_SYS_NAND_OOBSIZE     64
 #define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #endif                         /* __CONFIG_H__ */