Merge branch '2020-05-07-more-kconfig-migrations'

[oweals/u-boot.git] / include / configs / warp.h

diff --git a/include/configs/warp.h b/include/configs/warp.h
index d5c3215099b486572d45534ca2b8055b682feb92..654f8349f4df6df0683efd7d4a4d88ce834f273b 100644 (file)
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 O.S. Systems Software LTDA.
  * Copyright (C) 2014 Kynetics LLC.
@@ -6,8 +7,6 @@
  * Author: Otavio Salvador <otavio@ossystems.com.br>
  *
  * Configuration settings for the WaRP Board
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,32 +17,17 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
-
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + SZ_256M)
-
-#define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_512M
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -54,50 +38,29 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OFFSET              (6 * SZ_64K)
-#define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
 /* VDD voltage 1.65 - 1.95 */
 #define CONFIG_SYS_SD_VOLTAGE          0x00000080
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Only OTG2 port enabled */
 #endif
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
 
-#define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
 /* PMIC */
@@ -118,10 +81,10 @@
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "finduuid=part uuid mmc 0:2 uuid\0" \
        "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -129,6 +92,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \