/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
-#define CONFIG_SYS_TEXT_BASE 0x0
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
+#ifdef CONFIG_ONENAND
+#define CONFIG_SPL
+#define CONFIG_SPL_ONENAND_SUPPORT
+#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
+#define CONFIG_SPL_ONENAND_LOAD_SIZE \
+ (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
+#define CONFIG_SPL_TEXT_BASE 0x5c000000
+#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds"
+#endif
/*
* Environment settings
"bootm 0xa4000000; " \
"fi; " \
"bootm 0x60000;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "update_onenand=" \
+ "onenand erase 0x0 0x80000 ; " \
+ "onenand write 0xa0000000 0x0 0x80000"
+
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
+#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
/*
* Clock Configuration
#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */
-/*
- * Stack sizes
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
/*
* DRAM Map
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
-#define CONFIG_SYS_IPL_LOAD_ADDR (0x5c000000)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048)
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
#define CONFIG_SYS_MONITOR_BASE 0x0
-#define CONFIG_SYS_MONITOR_LEN 0x40000
+#define CONFIG_SYS_MONITOR_LEN 0x80000
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE 0x4000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x20000
#if defined(CONFIG_CMD_FLASH) /* NOR */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define CONFIG_ENV_IS_IN_FLASH 1
-/*
- * The first four sectors of the NOR flash are 0x8000 bytes big, the rest of the
- * flash consists of 0x20000 bytes big sectors.
- */
-#if (CONFIG_ENV_ADDR <= 0x18000)
-#define CONFIG_ENV_SECT_SIZE 0x8000
-#else
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#endif
-
#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ONENAND_BASE 0x00000000
#define CONFIG_ENV_IS_IN_ONENAND 1
-#define CONFIG_ENV_SECT_SIZE 0x20000
#else /* No flash */
#define CONFIG_SYS_NO_FLASH