*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_H
+#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
-
-#undef BOARD_LATE_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-#undef CONFIG_USE_IRQ
-#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
+#ifdef CONFIG_ONENAND
+#define CONFIG_SPL
+#define CONFIG_SPL_ONENAND_SUPPORT
+#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
+#define CONFIG_SPL_ONENAND_LOAD_SIZE \
+ (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
+#define CONFIG_SPL_TEXT_BASE 0x5c000000
+#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds"
+#endif
/*
* Environment settings
*/
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE 128
-
-#define CONFIG_ENV_OVERWRITE /* override default environment */
-
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_MALLOC_LEN (128*1024)
+#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"if mmc init && fatload mmc 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"if usb reset && fatload usb 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
- "bootm 0x40000;"
+ "if ide reset && fatload ide 0 0xa4000000 uImage; then " \
+ "bootm 0xa4000000; " \
+ "fi; " \
+ "bootm 0x60000;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "update_onenand=" \
+ "onenand erase 0x0 0x80000 ; " \
+ "onenand write 0xa0000000 0x0 0x80000"
+
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-
#define CONFIG_LZMA /* LZMA compression support */
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
+#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
#undef CONFIG_LCD
#define CONFIG_CMD_IDE
-#ifdef CONFIG_ONENAND_U_BOOT
+#ifdef CONFIG_ONENAND
#undef CONFIG_CMD_FLASH
#define CONFIG_CMD_ONENAND
#else
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
-#define DM9000_IO (CONFIG_DM9000_BASE)
-#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
+#define DM9000_IO (CONFIG_DM9000_BASE)
+#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#endif
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "$ "
#else
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "=> "
#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
/*
* Clock Configuration
*/
-#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
-#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
+#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
+#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
/*
* DRAM Map
*/
-#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+
+#ifdef CONFIG_RAM_256M
#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
+#endif
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
+#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
+#else
+#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
+#endif
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR (0x5c000000)
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
+#define CONFIG_SYS_MONITOR_BASE 0x0
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+
#if defined(CONFIG_CMD_FLASH) /* NOR */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+
+#ifdef CONFIG_RAM_256M
#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+#endif
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
+#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+#else
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH 1
#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ONENAND_BASE 0x00000000
+
#define CONFIG_ENV_IS_IN_ONENAND 1
#else /* No flash */
#define CONFIG_SYS_ENV_IS_NOWHERE
#endif
-#define CONFIG_SYS_MONITOR_BASE 0x000000
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
/*
* IDE
*/
#undef CONFIG_IDE_LED
#undef CONFIG_IDE_RESET
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 1
+#define __io
-#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
-#define CONFIG_SYS_ATA_REG_OFFSET 0x120
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
+#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
+
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
+#define CONFIG_SYS_ATA_REG_OFFSET 0x120
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
#define CONFIG_SYS_ATA_STRIDE 2
#endif
#define CONFIG_SYS_MSC0_VAL 0x3ffc95fa
#define CONFIG_SYS_MSC1_VAL 0x02ccf974
#define CONFIG_SYS_MSC2_VAL 0x00000000
+#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3
+#else
+#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3
+#endif
#define CONFIG_SYS_MDREFR_VAL 0x201fe01e
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
* LCD
*/
#ifdef CONFIG_LCD
-#define CONFIG_VOIPAC_LCD
+#define CONFIG_VOIPAC_LCD
#endif
/*
* USB
*/
-#ifdef CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT