Motion-PRO: Add displaying of CPLD revision information during boot.

[oweals/u-boot.git] / include / configs / utx8245.h

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 80cfe8a199043423f6e7e715ffd91c47d2d0e741..e5d4397d2c74c9e4f71b26dcd2c327013dbd0c9a 100644 (file)
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -70,19 +70,19 @@
        "ramdisk_addr=FF800000\0" \
        "u-boot_startaddr=FFB00000\0" \
        "u-boot_endaddr=FFB2FFFF\0" \
-       "nfsargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/nfs rw \
-nfsroot=$(nfsrootip):$(rootpath) ip=dhcp\0" \
-       "ramargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/ram0\0" \
-       "smargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/mtdblock1 ro\0" \
-       "fwargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/sda2 ro\0" \
-       "nfsboot=run nfsargs;bootm $(kernel_addr)\0" \
-       "ramboot=run ramargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
-       "smboot=run smargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
-       "fwboot=run fwargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
-       "update_u-boot=tftp $(loadaddr) /bdi2000/u-boot.bin;protect off \
-$(u-boot_startaddr) $(u-boot_endaddr);era $(u-boot_startaddr) \
-$(u-boot_endaddr);cp.b $(loadaddr) $(u-boot_startaddr) $(filesize);\
-protect on $(u-boot_startaddr) $(u-boot_endaddr)"
+       "nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \
+nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \
+       "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \
+       "smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \
+       "fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \
+       "nfsboot=run nfsargs;bootm ${kernel_addr}\0" \
+       "ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+       "smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+       "fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+       "update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \
+${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \
+${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\
+protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 
 #define CONFIG_ENV_OVERWRITE
 
@@ -91,7 +91,6 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
                                                                | CFG_CMD_ENV | CFG_CMD_CONSOLE \
                                                                | CFG_CMD_LOADS | CFG_CMD_LOADB \
                                                                | CFG_CMD_IMI | CFG_CMD_CACHE \
-                                                               | CFG_CMD_RUN | CFG_CMD_ECHO \
                                                                | CFG_CMD_REGINFO | CFG_CMD_NET\
                                                                | CFG_CMD_DHCP | CFG_CMD_I2C \
                                                                | CFG_CMD_DATE)
@@ -125,6 +124,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER      8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #define PCI_ENET0_IOADDR       0xF0000000