ARM: keystone2: update the default addresses of the secure monitor
[oweals/u-boot.git] / include / configs / ti_armv7_keystone2.h
index 401dec44931af1a9e4d586ffa5edcb47bf87c3d2..ba12428dbe6b19631fa6a609ec3316dd7da2d3a4 100644 (file)
@@ -15,7 +15,6 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 2nd stage loader */
 
 /* SoC Configuration */
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 
 /* Memory Configuration */
@@ -44,7 +43,6 @@
                                        CONFIG_SYS_SPL_MALLOC_SIZE + \
                                        SPL_MALLOC_F_SIZE + \
                                        KEYSTONE_SPL_STACK_SIZE - 4)
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 
 /* SRAM scratch space entries  */
 #define SRAM_SCRATCH_SPACE_ADDR        CONFIG_SPL_STACK + 0x8
 #define CONFIG_SYS_NAND_MASK_CLE               0x4000
 #define CONFIG_SYS_NAND_MASK_ALE               0x2000
 #define CONFIG_SYS_NAND_CS                     2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 
 #define CONFIG_SYS_NAND_LARGEPAGE
        DFU_ALT_INFO_MMC \
 
 /* U-Boot general configuration */
-#define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
 
 /* EDMA3 */
        "addr_secdb_key=0xc000000\0"                                    \
        "name_kern=zImage\0"                                            \
        "addr_mon=0x87000000\0"                                         \
-       "addr_non_sec_mon=0x0c087fc0\0"                                 \
-       "addr_load_sec_bm=0x0c08c000\0"                                 \
+       "addr_non_sec_mon=0x0c097fc0\0"                                 \
+       "addr_load_sec_bm=0x0c09c000\0"                                 \
        "run_mon=mon_install ${addr_mon}\0"                             \
        "run_mon_hs=mon_install ${addr_non_sec_mon} "                   \
                        "${addr_load_sec_bm}\0"                         \
        "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
        "get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"    \
        "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"    \
-       "get_fit_net=dhcp ${addr_fit} ${tftp_root}"                     \
-                                               "/${fit_bootfile}\0"    \
-       "get_fit_nfs=nfs ${addr_fit} ${nfs_root}/boot/${fit_bootfile}\0"\
-       "get_fit_ubi=ubifsload ${addr_fit} ${bootdir}/${fit_bootfile}\0"\
-       "get_fit_mmc=load mmc ${bootpart} ${addr_fit} "                 \
-                                       "${bootdir}/${fit_bootfile}\0"  \
+       "get_fit_net=dhcp ${addr_fit} ${tftp_root}/${name_fit}\0"       \
+       "get_fit_nfs=nfs ${addr_fit} ${nfs_root}/boot/${name_fit}\0"    \
+       "get_fit_ubi=ubifsload ${addr_fit} ${bootdir}/${name_fit}\0"    \
+       "get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}\0" \
        "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"   \
        "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
        "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
        "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"      \
        "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"   \
        "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
-       "get_fit_ramfs=dhcp ${addr_fit} ${tftp_root}"                   \
-                                               "/${fit_bootfile}\0"    \
+       "get_fit_ramfs=dhcp ${addr_fit} ${tftp_root}/${name_fit}\0"     \
        "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
        "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
        "get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"    \