Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig

[oweals/u-boot.git] / include / configs / ti_am335x_common.h

diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 128b66edef513edbff2c35d4afb852bd318f05bb..d841b3f7b622b42545385d1be0de50556fd6faa5 100644 (file)
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -12,9 +12,7 @@
 #ifndef __CONFIG_TI_AM335X_COMMON_H__
 #define __CONFIG_TI_AM335X_COMMON_H__
 
-#define CONFIG_AM33XX
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
@@ -22,25 +20,24 @@
 #include <asm/arch/omap.h>
 
 /* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
+#endif
 #define CONFIG_SYS_NS16550_CLK         48000000
 
+#ifndef CONFIG_SPL_BUILD
 /* Network defines. */
-#define CONFIG_CMD_NET                 /* 'bootp' and 'tftp' */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_BOOTP_DNS               /* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
 #define CONFIG_MII                     /* Required in net/eth.c */
+#endif
 
+#define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
 /*
  * RTC related defines. To use bootcount you must set bootlimit in the
  * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
@@ -60,12 +57,10 @@
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
 #define CONFIG_SPL_TEXT_BASE           0x402F0400
-#define CONFIG_SPL_MAX_SIZE            (0x4030B800 - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_SDRAM_BASE + \
                                         (128 << 20))
 
 /* Enable the watchdog inside of SPL */
-#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -75,11 +70,20 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f.  This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH     /* ELM support */
 #endif
 
 /* Now bring in the rest of the common code. */
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
 
 #endif /* __CONFIG_TI_AM335X_COMMON_H__ */