arc: add Arcangel4 board support

[oweals/u-boot.git] / include / configs / ti_am335x_common.h

diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index fd3ffab015bd26f2185590834bbac4de68eaf96b..4364eef7ba82e00a7b068a036262398a8efefcf1 100644 (file)
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -18,6 +18,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #include <asm/arch/omap.h>
 
@@ -28,23 +29,41 @@
 #define CONFIG_SYS_NS16550_CLK         48000000
 
 /* Network defines. */
-#define CONFIG_CMD_NET
+#define CONFIG_CMD_NET                 /* 'bootp' and 'tftp' */
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS               /* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
+#define CONFIG_CMD_PING
+#define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
+#define CONFIG_MII                     /* Required in net/eth.c */
+
+/*
+ * RTC related defines. To use bootcount you must set bootlimit in the
+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
+ * in the board config.
+ */
+#define CONFIG_SYS_BOOTCOUNT_ADDR      0x44E3E000
 
-/* SPL defines. */
+/* Enable the HW watchdog, since we can use this with bootcount */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_OMAP_WATCHDOG
+
+/*
+ * SPL related defines.  The Public RAM memory map the ROM defines the
+ * area between 0x402F0400 and 0x4030B800 as a download area and
+ * 0x4030B800 to 0x4030CE00 as a public stack area.  The ROM also
+ * supports X-MODEM loading via UART, and we leverage this and then use
+ * Y-MODEM to load u-boot.img, when booted over UART.
+ */
 #define CONFIG_SPL_TEXT_BASE           0x402F0400
-#define CONFIG_SPL_MAX_SIZE            (0x4030C000 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_MAX_SIZE            (0x4030B800 - CONFIG_SPL_TEXT_BASE)
+
+/* Enable the watchdog inside of SPL */
+#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /*
  * Since SPL did pll and ddr initialization for us,