ARM: zynq: Fix location of stack and malloc areas

[oweals/u-boot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 2e37a5cf54c71c4466585d1b35eacbc6e9400df0..17b0213362e4af3c5e3b2b5c3fba09432cebb492 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -18,16 +18,10 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT              "Matrix U-Boot> "
-#define CONFIG_BOOTDELAY               3
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SYS_HZ                  1000
 
+#define CONFIG_IMX_THERMAL
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
@@ -45,9 +39,7 @@
 #define CONFIG_SYS_MEMTEST_END \
        (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_TEXT_BASE           0x80000000
 #define CONFIG_SYS_BOOTMAPSZ           0x6C000000
-#define CONFIG_SYS_LOAD_ADDR           0x10800000
 
 /* Serial console */
 #define CONFIG_MXC_UART
@@ -58,42 +50,29 @@
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_CONS_INDEX              1
 
+#define CONFIG_PRE_CONSOLE_BUFFER
+#define CONFIG_PRE_CON_BUF_SZ          4096
+#define CONFIG_PRE_CON_BUF_ADDR                0x7C000000
+
 /* *** Command definition *** */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_CMD_TIME
 
 /* Filesystems / image support */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_FIT
 
 /* MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -153,10 +132,10 @@
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW    0
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM                0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER      "TBS"
@@ -188,21 +167,13 @@
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_I2C_EDID
 #endif
 
-/* Fuses */
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /* Environment organization */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         2
@@ -221,7 +192,7 @@
        "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
                        "rdinit=/sbin/init enable_wait_mode=off\0" \
        "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
-                       "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+                       "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
        "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
        "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
                        "run bootargs_upd; " \