Merge branch 'master' of git://git.denx.de/u-boot
[oweals/u-boot.git] / include / configs / sunxi-common.h
index 8de9c2b70632ef9bf7b11fd7151b1733a5874bb9..b0bfc0dfd7daecdf99a09a269e54532fa862833a 100644 (file)
@@ -35,7 +35,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_SUNXI           /* sunxi family */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */
 #endif
@@ -54,7 +53,6 @@
 #endif
 
 /* CPU */
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_TIMER_CLK_FREQ          24000000
 
 /*
@@ -69,7 +67,6 @@
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_LOAD_ADDR           0x22000000 /* default load address */
 #define CONFIG_SYS_TEXT_BASE           0x2a000000
-#define CONFIG_PRE_CON_BUF_ADDR                0x2f000000
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -80,7 +77,6 @@
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 #define CONFIG_SYS_LOAD_ADDR           0x42000000 /* default load address */
 #define CONFIG_SYS_TEXT_BASE           0x4a000000
-#define CONFIG_PRE_CON_BUF_ADDR                0x4f000000
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
 #define CONFIG_MMC_SUNXI_SLOT          0
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0       /* first detected MMC controller */
+#define CONFIG_SYS_MMC_MAX_DEVICE      4
 #endif
 
 /* 64MB of malloc() pool */
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_SYS_MONITOR_LEN         (768 << 10)     /* 768 KiB */
-#define CONFIG_IDENT_STRING            " Allwinner Technology"
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_ENV_OFFSET              (544 << 10) /* (8 + 24 + 512) KiB */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 #endif
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        80      /* 40KiB */
 #define CONFIG_SPL_PAD_TO              32768           /* decimal for 'dd' */
 
 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
@@ -293,17 +287,13 @@ extern int soft_i2c_gpio_scl;
 
 #define CONFIG_VIDEO_SUNXI
 
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_STD_TIMINGS
 #define CONFIG_I2C_EDID
 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 
 /* allow both serial and cfb console. */
-#define CONFIG_CONSOLE_MUX
 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 
 #endif /* CONFIG_VIDEO */
 
@@ -333,15 +323,10 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif
 
-#ifdef CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_RAM
-#endif
-
 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
@@ -360,9 +345,7 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_PREBOOT
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 #endif
 
@@ -374,15 +357,10 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #ifndef CONFIG_SPL_BUILD
 #include <config_distro_defaults.h>
 
-/* Enable pre-console buffer to get complete log on the VGA console */
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ          4096 /* Aprox 2 80*25 screens */
-
 #ifdef CONFIG_ARM64
 /*
  * Boards seem to come with at least 512MB of DRAM.